Works Department Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
Refer DocumentsDocument Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_EICCL_69297_1Bid Award Id
ViewTender No
RC(RANDB)RGD01/2021-22Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Detailed Tender Call Notice
Bid security / EMD declaration
BOQ Items
... More
In Ground Floor
Cement Concrete of proportion (1:2:4) in foundation and floors using 12m size Crusher broken Hard granite stone metal of approved quality from approved quarry, free from skin, including hosting, lowering and laying compacting concrete in layers not exceeding 15 cm (6") thick in depth, ramming watering curing etc. including cost, conveyance, royalty and taxes of all materials with all labour with T&P required for the work etc. complete including dewatering if required as per drawing and Technical specification and as directed by the Engineer-in-Charge.
13.53
-
5591.27
... More
In Ground Floor (RCC M-20 Concrete in Column Base & footing
RCC work of M-20 grade in the following Structural building works using 20mm down graded hard black granite Crusher broken aggregates of approved quality from approved quarry including mixing hoisting lowering laying compacting concrete using concrete mixer, vibrator watering and curing for four weeks centering and shuttering and finishing the exposed surfaces smooth as per relevant clauses of section 1700 of MORT&H specification for Road & Bridge works (4th Revision) including hire and running charges of all machineries including cost, conveyance, royalty and taxes of all materials and labour with T&P required for the work etc. complete as per drawing and Technical Specification and as directed by the Engineer-in- Charge.(Excluding cost of reinforcement & binding wires to be used in the work)
58.69
-
4640.99
... More
In Ground Floor (RCC M-20 Concrete in Plinth Beam)
RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect…
18.37
-
5003.06
... More
In Ground Floor (RCC M-20 Concrete in Column shaft)
RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect…
20.55
-
11820.56
... More
In Ground Floor (RCC M-20 Concrete in Lintel)
RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
3.55
-
8159.86
... More
In Ground Floor (RCC M-20 Concrete in Chajja)
Providing RCC with M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
14.72
-
767.44
... More
In Ground Floor (RCC M-20 Concrete in Fin)
Providing RCC with M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
24.53
-
1579.71
... More
In Ground Floor (RCC M-20 Concrete in Stair Case)
Providing RCC with M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
1.41
-
9842.19
... More
In Ground Floor (RCC M-20 Concrete in Beam)
RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
17.47
-
11820.56
... More
In Ground Floor (RCC M-20 Concrete in Roof Slab)
RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
32.81
-
8811.85
... More
In Ground Floor (HYSD Steel reinforcement works)
Supplying fitting and placing uncoated HYSD Steel reinforcement works using HYSD (FE-500) (SAIL Only) steel of approved manufacturer as per section 1600 §ion 1900 of MORT&H specification for Road and Bridge works ( 4th revision) including cost, conveyance and taxes of all materials, binding wires 18 to 20 gauge and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. (weight of reinforcement sall be calculated on the basis of IS 1732. wastage, overlaps, couplings, welded joints, space bars, chairs, stays, hangers and annealed steel wires or other method of binding & placing shall not be considered for payment)
155.43
-
7821.77
... More
In Ground Floor (Fly ash brick in C.M. 1:6 in Plinth and foundation)
Fly ash brick masonry in cement mortar (1:6) in Plinth and foundation using bricks of “23cmx11cmx8cm" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge.
46.19
-
4050.47
... More
In Ground Floor (Fly ash brick in C.M. 1:6 in Superstructure)
Fly ash brick masonry in cement mortar (1:6) in Superstructure using bricks of “23cmx11cmx8cm" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use..................
47.83
-
4086.87
... More
In Ground Floor (12 mm thick Cement Plaster in 1:6 both inside & out Side the wall)
12 mm thick Cement Plaster (1:6) with screened and washed sharp sand for mortar and finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required and scaffolding required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.
301.03
-
134.25
... More
In Ground Floor (16 mm thick Cement Plaster in 1:6)
16 mm thick Cement Plaster (1:6) with screened and washed sharp sand for mortar and finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required and scaffolding required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.
301.03
-
192.08
... More
In Ground Floor (6 mm thick Cement Plaster in 1:4 for both inside & out Side the wall)
6 mm thick Cement Plaster (1:4) with screened and washed sharp sand for mortar and finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required and scaffolding required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.
199.17
-
151.21
... More
In Ground Floor (20mm thick Cement Plaster in 1:6)
20 mm thick Cement Plaster (1:6) with screened and washed sharp sand for mortar and finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required and scaffolding required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.
55.89
-
201.37
... More
In Ground Floor (MS Grills)
Supplying, fitting, fixing of all types of MS Grills made of ISI marked standard MS Angles of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings, including mending to sizes supplying and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.
874
-
56
... More
In Ground Floor (Sliding Window)
Supplying , fitting , fixing up window (sliding type) made up aluminum section 9778 as window frame , section no.4095,4096 and 9777,3994 as shutter frame with 5mm rubber beading including all fitting including cost of materials all taxes labour, T&P Including cost the glass etc. complete as per direction of Engineer- in -charge.
30.1
-
3475.73
... More
In Gound Floor ( Al. door with OEL)
Providing fitting, fixing of Al. door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 12mm thick pre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P , hire charges of drilling machine, labour charges etc. complete. including cost, conveyance, royalityes, labour, T&P etc. complete for the work as directed by the Engineer-in-charge.
13.03
-
6005.43
... More
In Gound Floor ( senthetic Enamel paint over iron work)
Painting two coat over a coat of redoxide primer with any approved S/E paint over iron works including sand papering, polishing the surface including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
16.23
-
187.62
... More
In Ground Floor (Vertified tiles 600mm x 600mm size)
Suppllying, fitting and fixing of Vertified tiles (600 mm x 600 mm) Plain (Ivory) in floors (marbonite or equivalent make) in all floors over 25 mm thick bed of Cement moratr (1:1) jointed with neat cement slurry mixed with with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc completeas per drawing and Technical Specification and as directed by the Engineer-in- Charge.
199.17
-
887.81
... More
In Ground Floor (Ceramic tiles 40mm x 40mm with C.M. 1:3)
Supplying, fitting and fixing of Ceramic tiles 40mm x 40mm in Dadoes stracking (marbonite or equivalent make) in all floors over 12 mm thick bed of Cement moratr (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc complete as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
244.12
-
725.61
... More
In Ground Floor (vetrified Industrial Tile)
Suppllying, fitting and fixing of vetrified Industrial Tile in floors (marbonite or equivalent make) of premium grade in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete, including cost, conveyance and taxes of all materials, cost of all labour, T&P etc completeas per drawing and Technical Specification and as directed by the Engineer-in- Charge.
18.77
-
850.46
... More
In Ground Floor ( water based cement putty (Both inside and out side))
Finishing wall surfaces with cement putty (water based) of approved quality for making smooth even to receive painting including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
402.6
-
65.82
... More
In Ground Floor ( Gypsum Board Ceilling)
Providing fitting and fixing of false ceilling with Aluminium anodised T- section No.3215 with 2'-0" centre to centre, L-section No. 1705 upto micron on 4 walls to be fixed by means of steel screw and P.V.C. Plug and the Aluminium grid 2'-0" x 2'-0" with gypsum board suspended from celling etc complete including all cost of labour, T&P , hire charges of drilling machine, labour charges etc. complete. including cost, conveyance, royalityes, labour, T&P etc. complete for the work as directed by the Engineer-in-charge.
199.17
-
747.77
... More
In Ground Floor ( Carnish for Gypsum Board Ceilling)
Providing, Fixing and fitting of design carnis , including cost, conveyance of all materials with labour and T&P required for the work etc.complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
156.95
-
166.3
... More
In Ground Floor (Two coats with Plastic Emulsion paint over a coat of primer)
Finishing wall surfaces with Plastic emulsion paint (Plastic paint) of approved shade on new works two coats to give an even shade over a coat of water boand cement primer over the prepared surfaces including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
375.21
-
135.28
... More
In Ground Floor ( Painting two coat weather over a coat of primer) Painting two coat with approved weather seal paint of approved colour, shade on wall surface over a coat of wall primer including sand papering, polishing the surface, including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
223.53
-
129.72
... More
In Ground Floor (Stainless Steel in hand railing )
Supplying fitting and fixing of Stainless Steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx 2mm @ 0.90mtr C/C and Stainless square pipe bracing of size 32mmx 32mmx 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing,etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
6.71
-
2890.04
... More
In Ground Floor (Expansion Joint )
Supplying fitting and fixing of Expansion Joint system related with Floor Location as per drawing, the joint will be of extruded aluminium base memeber self aligning / self centering arrangement support plates etc. including cost of material and labours etc to complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
58.81
-
5250
... More
In Ground Floor (Dismantling & removing of RCC Work )
Dismantling and removing of RCC columns / beams, slab stair case landing lintels including stacking the useful materials for reuse and removing the derbies within 50m lead including cost, conveyance, of all materials with all labour and T&P required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge.
22.3
-
1153.38
... More
In Ground Floor (Dismantling and removing of CB Brick / Stone masonary )
Dismantling and removing of CB Brick / Stone masonary walls including stacking the useful materials for reuse and removing the derbies within 50m lead including cost, conveyance, of all materials with all labour and T&P required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge.
76.73
-
1084.96
... More
In Ground Floor (Earth work in Convyance by mechanical means)
Earth work in Convyance by mechanical means including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and technical Specification and directed by the Engineer-in-Charge.
99.02
-
151.17
... More
1st Floor (Civil)
1
-
-
... More
In First Floor (RCC M-20 Concrete in Column shaft)
RCC work of M-20 grade in the following Structural building works using 20mm down graded hard black granite Crusher broken aggregates of approved quality from approved quarry including mixing hoisting lowering laying compacting concrete using concrete mixer, vibrator watering and curing for four weeks centering and shuttering and finishing the exposed surfaces smooth as per relevant clauses of section 1700 of MORT&H specification for Road & Bridge works (4th Revision) including hire and running charges of all machineries including cost, conveyance, royalty and taxes of all materials and labour with T&P required for the work etc. complete as per drawing and Technical Specification and as directed by the Engineer-in- Charge.(Excluding cost of reinforcement & binding wires to be used in the work)
15.6
-
13370.24
... More
In First Floor (RCC M-20 Concrete in Lintel)
Providing RCC with M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
2.93
-
8977.39
... More
In First Floor (RCC M-20 Concrete in Chajja)
Providing RCC with M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
14.72
-
867.99
... More
In First Floor (RCC M-20 Concrete in Fin)
Providing RCC with M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
22.48
-
1834.57
... More
In First Floor (RCC M-20 Concrete in Stair case)
RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
1.41
-
10996.2
... More
In First Floor (RCC M-20 Concrete in Beam)
RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
17.47
-
13370.24
... More
In First Floor (RCC M-20 Concrete in Roof Slab)
RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
32.81
-
9759.77
... More
In First Floor (HYSD Steel reinforcement works)
Supplying fitting and placing uncoated HYSD Steel reinforcement works using HYSD (FE-500) (SAIL Only) steel of approved manufacturer as per section 1600 §ion 1900 of MORT&H specification for Road and Bridge works ( 4th revision) including cost, conveyance and taxes of all materials, binding wires 18 to 20 gauge and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. (weight of reinforcement sall be calculated on the basis of IS 1732. wastage, overlaps, couplings, welded joints, space bars, chairs, stays, hangers and annealed steel wires or other method of binding & placing shall not be considered for payment)
70
-
7845.14
... More
In First Floor (2.5 cm thick grading Concrete in 1:2:2)
2.5 cm (1") thick grading Concrete in proportion (1:2:2) using 6mm size crusher broken hard granite stone chips approved quality from approved quarry with screened and washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing woith including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
222.02
-
291.18
... More
In First Floor (Fly ash brick in C.M. 1:6 in Superstructure)
Fly ash brick masonry in cement mortar (1:6) in Superstructure using bricks of “23cmx11cmx8cm" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge.
49.79
-
4348.73
... More
In First Floor (12 mm thick Cement Plaster in 1:6 both inside & out Side the wall)
12 mm thick Cement Plaster (1:6) with screened and washed sharp sand for mortar and finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required and scaffolding required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.
286.53
-
137.5
... More
In First Floor (16 mm thick Cement Plaster in 1:6)
16 mm thick Cement Plaster (1:6) with screened and washed sharp sand for mortar and finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required and scaffolding required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.
286.53
-
196.91
... More
In First Floor (6 mm thick Cement Plaster in 1:4 over RCC Work )
6mm thick cement plaster (1:4) over RCC works including deep chipping, finished smooth with proper thickness, watering, curing for required days with cost, conveyance, royality, taxes of all materials and labour with T&P required or the work etc. complete in all respect as per drawing and technical specification and as directed by the Engineer-in-charge.
187.4
-
155
... More
In First Floor (MS Grills)
Supplying, fitting, fixing of all types of MS Grills made of ISI marked standard MS Angles of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings, including mending to sizes supplying and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.
1068
-
56
... More
In First Floor (Sliding Window)
Supplying , fitting , fixing up window (sliding type) made up aluminum section 9778 as window frame , section no.4095,4096 and 9777,3994 as shutter frame with 5mm rubber beading including all fitting including cost of materials all taxes labour, T&P Including cost the glass etc. complete as per direction of Engineer- in -charge.
28.52
-
3475.73
... More
In First Floor ( Al. door with OEL)
Providing fitting, fixing of Al. door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 12mm thick pre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P , hire charges of drilling machine, labour charges etc. complete. including cost, conveyance, royalityes, labour, T&P etc. complete for the work as directed by the Engineer-in-charge.
21.81
-
6005.43
... More
In FIrst Floor (Walling OEL aluminum)
Providing fitting and fixing up partition walling OEL aluminum anodized section No.9210 and 9207 as single groove and double groove respectively as horizontal and vertical member and OEL section 4660 as Tapered clip for fixing up 12mm thick pre laminated board (Nova pan Make) and jointing angle No. 1855 etc. including cost, conveyance, royality, Labour, T&P etc. complete as directed by the Engineer-iin-charge.
22.3
-
3056.08
... More
In First Floor ( senthetic Enamel paint over iron work)
Painting two coat over a coat of redoxide primer with any approved S/E paint over iron works including sand papering, polishing the surface including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
19.83
-
192.17
... More
In First Floor (Vertified tiles 600mm x 600mm size)
Suppllying, fitting and fixing of Vertified tiles (600 mm x 600 mm) Plain (Ivory) in floors (marbonite or equivalent make) in all floors over 25 mm thick bed of Cement moratr (1:1) jointed with neat cement slurry mixed with with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc completeas per drawing and Technical Specification and as directed by the Engineer-in- Charge.
97.62
-
907.6
... More
In First Floor (Ceramic tiles 40mm x 40mm with C.M. 1:3)
Supplying, fitting and fixing of Ceramic tiles 40mm x 40mm in Dadoes stracking (marbonite or equivalent make) in all floors over 12 mm thick bed of Cement moratr (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc complete as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
146.86
-
740.18
... More
In First Floor (vetrified Industrial Tile)
Suppllying, fitting and fixing of vetrified Industrial Tile in floors (marbonite or equivalent make) of premium grade in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete, including cost, conveyance and taxes of all materials, cost of all labour, T&P etc completeas per drawing and Technical Specification and as directed by the Engineer-in- Charge.
18.53
-
859.91
... More
In First Floor ( water based cement putty (Both inside and out side))
Finishing wall surfaces with cement putty (water based) of approved quality for making smooth even to receive painting including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
275.15
-
67.13
... More
In First Floor ( Gypsum Board Ceilling)
Providing fitting and fixing of false ceilling with Aluminium anodised T- section No.3215 with 2'-0" centre to centre, L-section No. 1705 upto micron on 4 walls to be fixed by means of steel screw and P.V.C. Plug and the Aluminium grid 2'-0" x 2'-0" with gypsum board suspended from celling etc complete including all cost of labour, T&P , hire charges of drilling machine, labour charges etc. complete. including cost, conveyance, royalityes, labour, T&P etc. complete for the work as directed by the Engineer-in-charge.
104.31
-
747.77
... More
In First Floor ( Carnish for Gypsum Board Ceilling)
Providing, Fixing and fitting of design carnis , including cost, conveyance of all materials with labour and T&P required for the work etc.complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
77.93
-
166.3
... More
In First Floor (Two coats with Plastic Emulsion paint over a coat of primer)
Finishing wall surfaces with Plastic emulsion paint (Plastic paint) of approved shade on new works two coats to give an even shade over a coat of water boand cement primer over the prepared surfaces including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
533.29
-
138.29
... More
In First Floor ( Painting two coat weather over a coat of primer) Painting two coat with approved weather seal paint of approved colour, shade on wall surface over a coat of wall primer including sand papering, polishing the surface, including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
231.16
-
134.73
... More
In First Floor (Stainless Steel in hand railing )
Supplying fitting and fixing of Stainless Steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx 2mm @ 0.90mtr C/C and Stainless square pipe bracing of size 32mmx 32mmx 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing,etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
13.41
-
2890.04
... More
2nd Floor (Head Room)(Civil)
1
-
-
... More
In 2nd Floor (RCC M-20 Concrete in Column shaft)
RCC work of M-20 grade in the following Structural building works using 20mm down graded hard black granite Crusher broken aggregates of approved quality from approved quarry including mixing hoisting lowering laying compacting concrete using concrete mixer, vibrator watering and curing for four weeks centering and shuttering and finishing the exposed surfaces smooth as per relevant clauses of section 1700 of MORT&H specification for Road & Bridge works (4th Revision) including hire and running charges of all machineries including cost, conveyance, royalty and taxes of all materials and labour with T&P required for the work etc. complete as per drawing and Technical Specification and as directed by the Engineer-in- Charge.(Excluding cost of reinforcement & binding wires to be used in the work)
2.55
-
15225.73
... More
In 2nd Floor (RCC M-20 Concrete in Lintel)
Providing RCC with M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
0.48
-
9954.29
... More
In 2nd Floor (RCC M-20 Concrete in Chajja)
Providing RCC with M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
0.84
-
988.38
... More
In 2nd Floor (RCC M-20 Concrete in Beam)
RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
0.87
-
15225.73
... More
In 2nd Floor (RCC M-20 Concrete in Roof Slab)
RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
1.95
-
10893.16
... More
In 2nd Floor (HYSD Steel reinforcement works)
Supplying fitting and placing uncoated HYSD Steel reinforcement works using HYSD (FE-500) (SAIL Only) steel of approved manufacturer as per section 1600 §ion 1900 of MORT&H specification for Road and Bridge works ( 4th revision) including cost, conveyance and taxes of all materials, binding wires 18 to 20 gauge and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. (weight of reinforcement sall be calculated on the basis of IS 1732. wastage, overlaps, couplings, welded joints, space bars, chairs, stays, hangers and annealed steel wires or other method of binding & placing shall not be considered for payment)
5
-
7868.62
... More
In 2nd Floor (2.5 cm thick grading Concrete in 1:2:2)
2.5 cm (1") thick grading Concrete in proportion (1:2:2) using 6mm size crusher broken hard granite stone chips approved quality from approved quarry with screened and washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing woith including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
15.57
-
300.82
... More
In 2nd Floor (Fly ash brick in C.M. 1:6 in Superstructure)
Fly ash brick masonry in cement mortar (1:6) in Superstructure using bricks of “23cmx11cmx8cm" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge.
17.31
-
4649.86
... More
In 2nd Floor (12 mm thick Cement Plaster in 1:6 both inside & out Side the wall)
12 mm thick Cement Plaster (1:6) with screened and washed sharp sand for mortar and finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required and scaffolding required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.
113.17
-
140.85
... More
In 2nd Floor (16 mm thick Cement Plaster in 1:6)
16 mm thick Cement Plaster (1:6) with screened and washed sharp sand for mortar and finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required and scaffolding required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.
113.17
-
201.89
... More
In 2nd Floor (6 mm thick Cement Plaster in 1:4 over RCC Work )
6mm thick cement plaster (1:4) over RCC works including deep chipping, finished smooth with proper thickness, watering, curing for required days with cost, conveyance, royality, taxes of all materials and labour with T&P required or the work etc. complete in all respect as per drawing and technical specification and as directed by the Engineer-in-charge.
10.14
-
158.92
... More
In 2nd Floor (MS Grills)
Supplying, fitting, fixing of all types of MS Grills made of ISI marked standard MS Angles of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings, including mending to sizes supplying and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.
86
-
56
... More
In 2nd Floor ( senthetic Enamel paint over iron work)
Painting two coat over a coat of redoxide primer with any approved S/E paint over iron works including sand papering, polishing the surface including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
5.12
-
200.03
... More
In 2nd Floor (Two coats with Plastic Emulsion paint over a coat of primer)
Finishing wall surfaces with Plastic emulsion paint (Plastic paint) of approved shade on new works two coats to give an even shade over a coat of water boand cement primer over the prepared surfaces including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
47.85
-
141.38
... More
In 2nd Floor ( Painting two coat weather over a coat of primer) Painting two coat with approved weather seal paint of approved colour, shade on wall surface over a coat of wall primer including sand papering, polishing the surface, including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
183.58
-
139.99
... More
GPH PART
1
-
-
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor PVC pipes conforming to ASTM-D-1785/89 of the following nominal bore, tube fittings and clamps including making the wall good, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.
20mm dia PVC pipe (SCH-80)
Ground Floor
25
-
111.8
... More
First Floor
25
-
117.7
... More
25mm dia PVC pipe (SCH-80)
Ground Floor (Water supply)
40
-
147.5
... More
First Floor
20
-
153.3
... More
32mm dia PVC pipe (SCH-80) (Water supply)(Top Floor)
15
-
206.7
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20mm dia C-PVC ASTM pipe (sch-80)
First Floor
10
-
231.9
... More
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
15mm dia CP angle stop cock (Jaquar)CON-CHR-059KN
12
-
664.4
... More
15mm dia CP short body bib cock (Jaquar)CON-CHR-047KN
1
-
787.5
... More
15mm dia CP two way bib cock (Jaquar)CON-041KN
3
-
910.5
... More
15mm dia CP elbow action bib cock(Jaquar Make)
3
-
696.6
... More
20mm dia CP concealed stop cock (Jaquar Make)CON-089KN
1
-
1033.5
... More
15mm dia CP long body bib cock (Jaquar Make)CON-107KN
4
-
1033.5
... More
25mm dia brass full way valve (Shakti make)
2
-
925.2
... More
32mm dia brass full way valve (Shakti make)
2
-
1354.4
... More
25mm dia CP Health Faucet (Jaquar Make)ALD - CHR - 565
3
-
1058.1
... More
15mm CP Extension piece
20
-
59.3
... More
125mm CP grating
12
-
82.1
... More
15mm size C.P. flange
20
-
40.3
... More
Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width Fly ash Bricks in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 2000 liters capacity PVC water storage tank (Roof of F.F)(Sintex-4 Layer)
1
-
34375
... More
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge. Ground Floor
6
-
43.6
... More
First Floor
6
-
44.4
... More
Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge. Ground Floor
4
-
150.3
... More
First Floor
4
-
151
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. Ground Floor
25
-
153.5
... More
First Floor
25
-
158.3
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
35
-
385.2
... More
75mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
25
-
194.1
... More
110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)
1
-
225
... More
110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
6
-
131.7
... More
110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
4
-
72.3
... More
110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
4
-
38.4
... More
75mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
2
-
30.7
... More
110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
8
-
115.2
... More
110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
12
-
32.9
... More
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
580mm size Orissa pan (Hindware/Parrywaremake)
1
-
2143.1
... More
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. European water closet with 'S' trap plain(Hindware/Parryware/Neycer make)
3
-
2568.6
... More
Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
4
-
1543.3
... More
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
550mmx400mm W.H.basin (Hindware/Parryware/Neycer) make with pedestal
4
-
3892.8
... More
Supplying all materials, labour, T&P for fitting & fixing Porc. Laboratory sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink
3
-
4884.3
... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
25mmx600mm long CP towel rail
4
-
692.3
... More
Towel ring
4
-
459.4
... More
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.
600mmx125mm plate glass shelf with CP/NP guard rails.
4
-
589.6
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
600mmx450mm size B.E mirror (swivelled type)
4
-
624.8
... More
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
CP soap holder
12
-
173.2
... More
Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.
½” x 5” CP Shower (Plaza Deluxe Make)
1
-
479.4
... More
Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
4
-
169
... More
Supplying all materials, labour, T&P and cutting of R.C.C roof or cornice for taking H.C.I pipes and making good the damages etc all complete as per P.H.Specification and direction of the Engineer in charge.
6
-
106.5
... More
Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site.
Ground Floor
0.81
-
311.3
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 40mm size crusher broken hard black granite metal including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
Ground Floor
0.81
-
4017.4
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
Ground Floor
0.54
-
5322.2
... More
First Floor
0.9
-
5616.2
... More
Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 30cmx30cm special printed series to be pre-approved by the Engineer-in-charge )
Ceramic tile 30cmx30cm in Ground Floor
5.38
-
801.5
... More
First Floor
8.98
-
811.1
... More
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
Ground Floor
25.24
-
142.1
... More
First Floor
36.58
-
145.3
... More
Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge )
Glazed tile 25cmx33cm in Ground floor
25.24
-
778.9
... More
First Floor
36.58
-
793.5
... More
Providing fitting, fixing of Al. door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 6mm plain glass in top portion with 12mm thick pre-laminated board in bottom portion fixed on door frame by means of tapered clip No.4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc.complete.
6.3
-
5140.37
... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge. 110mm dia P.V.C. pipe
15
-
946.4
... More
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge.
Inside size 760mmx760mmx460mm with 18” dia RCC MH cover
2
-
7618.3
... More
Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. Man hole chamber size 910mmx910mmx910mm (18" RCC Cover )
1
-
14888.3
... More
Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge
2
-
1289.2
... More
Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
2
-
17300.2
... More
20 Users septic tank of size 2.30m x 1.10m x 2.10m Internal size-1 No.
1
-
-
... More
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge
11.73
-
199.68
... More
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft.
4.69
-
214.35
... More
Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.
2.92
-
110.94
... More
Supplying all labor T&P &Providing C.C. (1:2:4) with 12mm size broken hard granite chips including watering curing & lead of all materials to site etc. all complete.
0.91
-
5322.2
... More
Providing C.C. (1:1½:3) with 12mm size hard granite chips of RCC work including hoisting and laying and curing with lead of all materials to site.
0.45
-
5913.9
... More
Supplying all materials, T&P and providing MS reinforcement for RCC work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauges.
0.4
-
7516.5
... More
Rigid & smooth centering & sheltering for RCC work including falls work & dismantling than after casting including cost of materials in ground floor.
RCC floor, roof slab chhaja up to 4.430 m height
4.29
-
430.5
... More
Supplying all materials labour T&P and providing 1st class KB brick work in CM (1:4) in foundation and plinth including watering and curing and lead of materials to site.
6.07
-
4325.5
... More
Supplying all materials labour T&P and providing 12mm thick C.P (1:4) including watering curing and conveyance of all materials to site.
22.09
-
142.1
... More
Supplying all materials labour T&P and providing cement punning including watering curing and conveyance of all materials to site. Same as plastering
22.09
-
30.4
... More
Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification.
4
-
221.9
... More
Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge.
2
-
319.9
... More
Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge.
1.17
-
311.3
... More
Electrical (GED)-Part
1
-
-
... More
Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with S.P 5/6Amp, one way modular switch ISI marked(L&T/crabtree/ Havells/ ROMA/ SIEMENS/ Finolex) and ceiling rose ISI marked mounted on Modular GI box of 18SWG having modular base & cover of suitable size with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard )
Group-A. L.P.- 12 F.P.- C.B.-
12
-
585.8
... More
Group-B. L.P.- 25 F.P.-9 C.B.-
34
-
726.19
... More
Group-C L.P.- 13 F.P.-9 C.B.-
22
-
1004.95
... More
Recessed wiring for 5/6Amp modular Socket outlet with 2x1.5mm2 FR PVC insualted single core multistand copper conductor of ISI marked in recess 20mm dia Non-metalic PVC flexible conduit with piano type switch,phenolic laminated sheet suitable size ISI marked on modular GI box and earthing point with 1x1.5sqmm FR PVC insulated single core multistand copper conductor for loap earthing etc.as required(make of wire-Finolex/L&T/Anchor/ Havels/V-Guard
Group-A.
4
-
552
... More
On Existing board.
10
-
214
... More
Recessed submain wiring along with earth wire with the following sizes of PVC insualted single core multistand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non-metalic heavy duty flexible conduit 1.6mm in recess PVC conduit as required(make of wire-Finolex/L&T/ Anchor/ Havels/V.Guard)
a)a)1x1.5mm2(1.19.2.SOR-17) Inverter wiring
135
-
45
... More
a)2x1.5mm2(1.19.2.SOR-17) loop wiring
82
-
56
... More
b)2x2.5mm2+1x1.5mm2(1.8.2.SOR-17)
160
-
139
... More
c)2x4mm2+1x1.5mm2 (1.8.3.SOR-17)
120
-
156
... More
e)4x6mm2+ 2x2.5mm2(1.8.8.SOR-17)
51
-
282
... More
S/F of 20W/18W LED batten light of crompton/ Havells/Panasonic make.
18
-
677
... More
S/F.of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of Ceiling rose.
7
-
2.68
... More
S/F.of 9W/10Wt.LED lamps of Havels/Crompton make.
7
-
157
... More
S/F of 1x15W 5700K cool daywhite light surface celing LED light made up of pressure die cast housing with secondary optics ,IP66 protection Havells make(ENDURA NEO DL SURFACE) OR Equivalent model of Havells/Crompton make including fixing on ceiling with grip and Connection as per direction of Engineer-in-Charge.(ext)
10
-
2089
... More
S/F of1x15W LED of 3700K Warm white/6000K coolday white recess mounted downlighter made up of pressure die cast Al. heat sink and PC diffuser in white powder coated finish with integrated driver Havells(INTEGRA)/ Crompton (CROM ROUND) OR Equivalent model of Havells & Crompton make including cutting of false ceiling and fixing as per direction of Engineer-in-Charge.
37
-
1152
... More
S/F of B.H fitting energy saving,surface mounted decorative round plastic bulk head 1x10Wt LED luminaires comprising high brightness LED with IP54 protection . Havells Make.(ELIPSE ROUND/ ELIPSE OVAL) as per direction of Engineer-in-charge. (terrace)
1
-
1545
... More
S/F.of 48"A.C.Ceiling fans complete with ISI marked (Havells (SS390 metallic/Havells SS390 DeCo) /Usha Striker (platinum/galaxy)/ Orient(Jazz/summer pride). make including all accessories & connection as per direction of Engineer-in-charge.
16
-
2998
... More
Supplying and fixing of stepped type modular regulator of ISI marked(ROMA/Crabtree/L&T/ Legrand) on Modular G.l. box of 18 SWG on surface or in recess with suitable size Modular base & cover module in front including providing and fixing connection, painting etc as required.
16
-
431
... More
Providing and fixing extra down rod of 60 cm length G.I. pipe 20 mm dia heavy gauge including Cutting & threading of Downrod as per direction of Engineer-in-charge.
16
-
94
... More
S/F of 300mm metal exhaust fan with wall cutting masonary work including all accessories of USHA(Jet Dix)/ Bajaj (Bahar)/ Crompton make & connection as per direction of Engineer-in-charge.
2
-
1821
... More
Supplying and fixing Modular G.l. box of 18 SWG on surface or in recess with Modular base & cover for module in front including providing and fixing 6pin 15/16Amp modular socket outlet and SP 15/16Amp oneway modular switch (Power Plug) with indicator connection, painting etc as required.
4
-
588
... More
Supplying and fixing suitable size Modular G.l. box for surface or in recess with Modular base & cover in front including providing and fixing of 6pin 15/16Amp modular socket outlet AC Point with 20/25AMP SP MCB of (Hager/L&T/Legrand make) connection, painting etc as required.
2
-
707
... More
Supplying and fixing of Modular G.l. box for suitable module on surface or in recess with Modular base & cover and blanking plate ( if required) in front including providing and fixing of 25AMP DOL starter (ROMA/ Crabtree/ Havells make) of modular type switch, connection, painting etc as required as per the direction of Engineer-in-Charge.
2
-
636
... More
S/F.of Computer board consisting of 4Nos 5/6AMP modular socket & modular switch including suitable size of GI modular box and modular base &cover (ROMA/ Crabtree/ Havells/L&T)complete with connection as per the direction of Engineer-in-Charge.
3
-
1478
... More
of S/F of (4+12) way TPN Double door D. Box (Hager/ L&T/ C&S/Legrand ) with 63Amp FP,12x(6-32Amp)SP MCB of Hager/ L&T/Legrand/C&S make including all accessories and connection. as per direction Engineer-in-Charge.
1
-
9209
... More
S/F of 25 sq.mm 3&1/2 Core Alluminium, armoured LT power Cable of XLPE insulated 650/1100V grade ISI mark(make-Havells/Polycab) as per direction of Engineer-in-charge. (To be Connected from new 250Amp panel to old Existing 250Amp Panel & To lift head room on terrace)
50
-
201
... More
S/M of end termination with brass compression gland and Al. lugs for 4 Core 25 mm2 PVC insulated and PVC sheathed/XLPE Al. cable of 1.1kV as per direction of Engineer-in-charge.
2
-
173.72
... More
Laying and Fixing PVC insulated and PVC sheathed/ XLPE power cable of 1.1kV grade of size 25 sqmm on surface.(SOR-5.5.1) as per direction of Engineer-in-charge.
40
-
55.55
... More
S/f.of Standard earthing with G.I.earth pipe(With charcoal and salt) (Sl.No.3.2.of SOR-2017) as per direction of Engineer-in-charge.
2
-
2145.24
... More
Extra for using salt and charcoal for G.I or copper pipe earth electrode as required as per direction of Engineer-in-charge.
2
-
469.65
... More
P/F of 6 SWG G.I. wire on surface or in recess for loop earthing along with existing surface/recessed conduit/ submain wiring/cable as required(To be connected to all Sub-Panels & Lift Head room panel)
20
-
15.15
... More
S/F.of Special earthing complete with provision of 600x600x3mmthick or (2ft x 2ft) copper plate, 38/40mm dia 3mtr long G.I.pipe , 25x3mm thick Cu.flat charcoal and salt,funel,earthpit chamber with masonary work including all accessories and connection as per direction of Engineer-in-charge.
1
-
12325.42
... More
Supply and laying of 25mmx5mm copper strip on surface or in recess for connection etc as required.(Connection to be made from special earth electrode to Main panel )as per direction of Engineer-in-charge.
10
-
491.87
... More
S/F of 100 Amp Panel Board size 36"×24"×12" with powder coat made of SWG Sheet with designing (i)100A, 25KA, 3pole MCCB of Adjustable thermal and fixed magnetic setting of L&T/Legrand/C&S -1 nos (ii)200 Amp TPN Copper bus bar, (iv)40A DP MCB of L&T/Hager/ C&S/Legrand -2nos. (v)50A/63A FP MCB of L&T/Hager/ C&S/Legrand -4nos. (viii)Digital Voltmeter,Ammeter, Selector switche as per direction of Engineer-in-charge.
1
-
34070.86
... More
Supply of Insulation mats Class A insulation of size 1Mx2Mx2mm.
1
-
2979
... More
Electrical Inspection charges for building
1
-
4687.5
... More
GED 1st floor
1
-
-
... More
Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with S.P 5/6Amp, one way modular switch ISI marked(L&T/crabtree/ Havells/ ROMA/ SIEMENS/ Finolex) and ceiling rose ISI marked mounted on Modular GI box of 18SWG having modular base & cover of suitable size with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard )
Group-A. L.P.-10 F.P.- C.B.-
10
-
585.8
... More
Group-B. L.P.-20 F.P.-07 C.B.-
27
-
726.19
... More
Group-C L.P.-12 F.P.-07 C.B.-
19
-
1004.95
... More
Recessed wiring for 5/6Amp modular Socket outlet with 2x1.5mm2 FR PVC insualted single core multistand copper conductor of ISI marked in recess 20mm dia Non-metalic PVC flexible conduit with piano type switch,phenolic laminated sheet suitable size ISI marked on modular GI box and earthing point with 1x1.5sqmm FR PVC insulated single core multistand copper conductor for loap earthing etc.as required(make of wire-Finolex/L&T/Anchor/ Havels/V-Guard
Group-A.
4
-
552
... More
On Existing board.
6
-
214
... More
Recessed submain wiring along with earth wire with the following sizes of PVC insualted single core multistand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non-metalic heavy duty flexible conduit 1.6mm in recess PVC conduit as required(make of wire-Finolex/L&T/ Anchor/ Havels/V.Guard)
a)1x1.5mm2(1.19.2.SOR-17)Inverter wiring
60
-
45
... More
b)2x1.5mm2(1.19.2.SOR-17) loop wiring
52
-
56
... More
c)2x2.5mm2+1x1.5mm2(1.8.2.SOR-17)
125
-
139
... More
d)2x4mm2+1x1.5mm2 (1.8.3.SOR-17)
162
-
156
... More
e)4x6mm2+ 2x2.5mm2(1.8.8.SOR-17)
85
-
282
... More
S/F of 20W/18W LED batten light of Crompton/Havells/Panasonic make.
15
-
677
... More
S/F of1x15W LED of 3700K Warm white/6000K coolday white recess mounted downlighter made up of pressure die cast Al. heat sink and PC diffuser in white powder coated finish with integrated driver Havells(INTEGRA)/ Crompton (CROM ROUND) OR Equivalent model of Havells & Crompton make including cutting of false ceiling and fixing as per direction of Engineer-in-Charge.
12
-
1152
... More
S/F.of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of Ceiling rose.
8
-
2.68
... More
S/F.of 9W/10Wt.LED lamps of Havels/Crompton/Panasonic make.
8
-
157
... More
S/F of 1x15W 5700K cool daywhite light surface celing LED light made up of pressure die cast housing with secondary optics ,IP66 protection Havells make(ENDURA NEO DL SURFACE) OR Equivalent model of Havells/Crompton make including fixing on ceiling with grip and Connection as per direction of Engineer-in-Charge.
12
-
2089
... More
S/F.of 48"A.C.Ceiling fans complete with ISI marked (Havells (SS390 metallic/Havells SS390 DeCo) /Usha Striker (platinum/galaxy)/ Orient(Jazz/summer pride). make including all accessories & connection as per direction of Engineer-in-charge.
14
-
2998
... More
Supplying and fixing of stepped type modular regulator of ISI marked(ROMA/Crabtree/L&T/ Legrand) on Modular G.l. box of 18 SWG on surface or in recess with suitable size Modular base & cover module in front including providing and fixing connection, painting etc as required.
14
-
431
... More
S/F of 300mm metal exhaust fan with wall cutting masonary work including all accessories of USHA(Jet Dix)/ Bajaj (Bahar)/ Crompton make & connection as per direction of Engineer-in-charge.
2
-
1821
... More
Supplying and fixing Modular G.l. box of 18 SWG on surface or in recess with Modular base & cover for module in front including providing and fixing 6pin 15/16Amp modular socket outlet and SP 15/16Amp oneway modular switch (Power Plug) with indicator connection, painting etc as required.
12
-
588
... More
Supplying and fixing suitable size Modular G.l. box for surface or in recess with Modular base & cover in front including providing and fixing of 6pin 15/16Amp modular socket outlet AC Point with 20/25AMP SP MCB of (Hager/L&T/Legrand make) connection, painting etc as required.
2
-
707
... More
Supplying and fixing of Modular G.l. box for suitable module on surface or in recess with Modular base & cover and blanking plate ( if required) in front including providing and fixing of 25AMP DOL starter (ROMA/ Crabtree/ Havells make) of modular type switch, connection, painting etc as required as per the direction of Engineer-in-Charge.
2
-
636
... More
S/F of 12 way Double door Power D. Box (Havells/L&T/Hager) with 63/50Amp TP,9x(6-32Amp)SP MCB of (Havells/L&T/Hager) make including all accessories and connection. As per direction Engineer-in-Charge.
2
-
6343
... More
S/F of 1x90W 5700K LED street light made up of pressure die cast housing with toughned glassindividual high powered LEDs with secondary optics ,IP66 protection Havells make(ENDURA PLUS )/Crompton ORION NEO including all accessories,G.I bracket and connection.including GI bracket.
10
-
10500
... More
S/F of 4 sq.mm 2 Core Alluminium, armoured LT power Cable of XLPE insulated 650/1100 grade(make-Havells/Polycab)
160
-
53
... More
S/F of Street Light Panel 3 Phase, Frame Size 1, Max. Load 6 kW, Digital 24 Hr. Timer, Contactor Rating (A) 32/TP, 40 / TPN MCB Rating of Havells make including all accessories and connection.
1
-
20130
... More
S/F of Electrical safety acrylic chart/Poster depicted with various safety precautions , management and provides information to perform First Aid in case of electric shock etc in English and odia language with Multi color images and sign.
1
-
500
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements