Works Department Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
Refer DocumentsDocument Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_EICCL_75535_1Bid Award Id
ViewTender No
CCE.Ctc.(RandB)32/2021-22Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Single Under reamed Bored Compaction Pile foundation with R.C.C. work of M-20 grade with 20mm and down grade black hard granite (crusher broken) stone chips including hoisting and laying including cost of boring but excluding cost of M.S/Tor steel and labour charges for cutting bending & binding of steel a) Single under ream pile (8.0m depth) 375 mm dia and 6.0 metre long Per 1 mtr.pile Excavation of bore hole
1764
-
1283.9
... More
(i) For each additional depth of 1.00m beyond initial depth of 6.0m up to 8.0m add extra to the rate Per 1 mtr Pile.
588
-
951.2
... More
Supplying & Filling foundation trenches , plinth & ditches with clean course river sand well watered and rammed in layers not exceeding 23 c.m. in depth with all lead and lift including cost, conveyance, loading, unloading, stacking,royalties and all taxes of sand,cost & conveyance of water, cost of all Labour,labour ess,T&P required for the work etc. complete in all respect as directed by the Engineer- in -charge. Building
2140.18
-
281.5
... More
Road
153
-
281.5
... More
Drain
84.09
-
281.5
... More
Back filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5m. etc. complete in all respect as directed by the Engineer- in -charge Building
64.12
-
138.6
... More
Drain
21.79
-
138.6
... More
Providing and laying plain cement concrete of proportion (1:2:4) in foundation and floors using 12mm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete including cost, conveyance, royalties and cost of all labours,labour cess, T&P etc complete as per specification & direction of the Engineer-in-charge. Building
164.37
-
5979.9
... More
Drain
33.25
-
5979.9
... More
Providing & applying of pre constructional anti-termite treatment by drilling 12mm dia holes at distance of 30cm @ junction of wall & floor about 300mm apart deep enough to reach the soil below & chemical emulsion (PREMISE, IMIDACHLOPRIED 30.5SC OF BAYER MAKE mixed with 47.5ltr water) pumped these holes to soak the soil @ 1 ltr solution of each hole as per manufactures specification & the holes should be pluged the filling materials including cost of all materials, labour,conveyance, T&P , all taxes and hire charges of machinaries as per direction of Engineer-in-charge.
1045
-
138.98
... More
Providing and laying in position ready mixed M-20 grade with 20mm and down grade black hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per spection and the direction of the Engineer-in-charge. Building RCC in Pile Cap
288.7
-
4987.1
... More
RCC in Grade beam
71.56
-
5342
... More
RCC in Lift up to PL
1.38
-
5342
... More
RCC Wall
5.52
-
6975
... More
RCC in Column from Pilecap top to PL
24.8
-
10694.2
... More
RCC in column GF
57.44
-
10694.2
... More
RCC in roof beam
61.42
-
10694.2
... More
RCC in roof slab
145.74
-
9115
... More
RCC in S.case
12.96
-
10213
... More
RCC in Lintel
12.11
-
8513.2
... More
RCC in Sill
6.9
-
8513.2
... More
RCC in Chajja
6.6
-
785.1
... More
RCC in Platform slab
3.08
-
785.1
... More
RCC in column 1st floor
57.44
-
11949.8
... More
RCC in roof beam
76.04
-
11949.8
... More
RCC in roof slab
145.74
-
10054.8
... More
Double heighted roof slab
26.16
-
11206.33
... More
RCC in S.case
11.72
-
11372.4
... More
RCC in Lintel
12.68
-
9332.6
... More
RCC in Sill
7.17
-
9332.6
... More
RCC in Chajja
10.6
-
884.7
... More
Platform Slab
3.08
-
884.7
... More
RCC in column 2nd flor
54.53
-
13452.3
... More
RCC in roof beam
63.81
-
13452.3
... More
RCC in roof slab
163.88
-
11178.1
... More
RCC in Staircase
4.66
-
12759.6
... More
RCC in Lintel
16.82
-
10311.7
... More
RCC in Sill
9.95
-
10311.7
... More
RCC in Chajja
17.22
-
1003.9
... More
Platform Slab
3.75
-
1003.9
... More
RCC in Column Terrace floor
16.69
-
15250.7
... More
RCC in roof beam
5.79
-
15250.7
... More
RCC in roof slab
26.03
-
12521.9
... More
RCC in Lintel
1.41
-
11481.9
... More
RCC in Sill
0.83
-
11481.9
... More
RCC in Chajja
5.68
-
1146.7
... More
RCC Stair case
0.88
-
14419.3
... More
Drain top cover slab
47.25
-
9115
... More
Wall
63
-
6975
... More
Base slab
47.25
-
4987.1
... More
Providing and laying plain cement concrete of (1:6:12) in foundation and floors using 4cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete including cost, conveyance, royalties and cost of all labours,labour cess, T&P etc complete as per specification & direction of the Engineer-in-charge.
4.66
-
4686
... More
Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / TATA / RINL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge Foundation
760.42
-
8488.5
... More
Ground floor
368.55
-
8488.5
... More
First floor
415.63
-
8512.2
... More
Second floor
383.88
-
8537
... More
Terrace Floor
63.27
-
8563.1
... More
Drain
141.75
-
8488.5
... More
Fly Ash brick masonry in cement mortar (1:6) in foundation & plinth using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties with all labour,labour cess and T & P required for the work complete in all respect as per specification and direction of Engineer-in-Charge.
77
-
4228.3
... More
Fly Ash Brick Masonry in cement mortar of mix (1:6) using Fly Ash bricks of size 25c.m x 12 c.m x 8 c.m in super structure having crushing strength not less than 75 kg per square c.m. with cement and screened & washed sharp sand for mortar after immersing the bricks for 6 (Six) hours in water before use in works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance,stacking, loading, unloading, royalties , all taxes ,cost of all labour,Labour cess ,scaffolding, sundries and T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge Ground floor
150.49
-
4261.6
... More
First floor
174.79
-
4526.8
... More
Second Floor
257.33
-
4831.5
... More
Terrace Floor
21.33
-
5181.8
... More
Fly Ash Brick Masonry in cement mortar of mix (1:4) using Fly Ash bricks of size 25c.m x 12 c.m x 8 c.m in Super structure having crushing strength not less than 75 kg per square c.m. with cement and screened & washed sharp sand for mortar after immersing the bricks for 6 (Six) hours in water before use in works with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, coveyance,stacking, loading, unloading, royalties , all taxes ,cost of all labour,Labour cess ,scaffolding, sundries and T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge. (A/R 2006, Pg-71, item no-2) Ground floor
11.48
-
4466.4
... More
First floor
14.04
-
4731.3
... More
Second floor
9.04
-
5035.9
... More
Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties, with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect and specification and direction of the Engineer in charge. (Outer side plastering) Ground floor
652.22
-
135.8
... More
First floor
742.02
-
141.2
... More
Second Floor
883.58
-
147
... More
Terrace Floor
967.11
-
153.1
... More
Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties, with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect and specification and direction of the Engineer in charge. (Inside plastering) Ground floor
933.46
-
135.8
... More
First floor
1006.9
-
139
... More
Second Floor
1156.48
-
142.4
... More
Providing 16mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary)including watering and curing,rounding of corners etc. complete with cost,conveyance,loading, unloading,royalities and taxes of all materials,cost of all labour,T&P and scaffolding required for the work etc. as directed by the Engineer-in-charge Ground floor
1524.12
-
194.3
... More
First floor
1687.95
-
199.2
... More
Second Floor
1973.17
-
204.2
... More
Terrace Floor
131.62
-
209.4
... More
Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance and royalties of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.GF
745.76
-
153.1
... More
First floor
818.07
-
156.9
... More
Second Floor
832.21
-
160.9
... More
Terrace Floor
108.6
-
165
... More
Priming one coat with water bound wall cement primer with cost, conveyance and royalties of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. GF Outer side
652.22
-
60
... More
Inside
3203.34
-
60
... More
Outer side 1st floor
742.02
-
62.4
... More
Inside
3512.92
-
61.5
... More
Outer side 2nd floor
883.58
-
65
... More
Inside
3961.86
-
63
... More
Outer side Terrace floor
967.11
-
67.7
... More
Inside
240.22
-
64.5
... More
Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, all materials, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge Ground floor
3203.34
-
66.3
... More
First floor
3512.92
-
67
... More
Second Floor
3961.86
-
67.6
... More
Terrace Floor
240.22
-
68.3
... More
Painting two coats with plastic emulsion paint with a approved quality primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge Ground floor
3203.34
-
81
... More
First floor
3512.92
-
82.6
... More
Second Floor
3961.86
-
84.2
... More
Terrace Floor
240.22
-
85.8
... More
Wall painting two coats with Weather coat paint (1st quality) exterior grade of approved make & with a approved quality primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge Ground floor
326.11
-
73.8
... More
First floor
371.01
-
76.5
... More
Second Floor
441.79
-
79.2
... More
Terrace Floor
483.56
-
82.1
... More
Finishing walls with textured exterior paint of required shade :
New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm Ground floor
326.11
-
158.37
... More
First floor
371.01
-
158.37
... More
Second Floor
441.79
-
158.37
... More
Terrace Floor
483.56
-
158.37
... More
Supplying,Providing & laying Double charge mat finished vitrified tile flooring using vitrified tiles having thickness of 8mm to 10mm conforming to IS 13755 of 800mmx800mm of premium quality of approved make (JOHNSON /OASIS / SOMANY/ KAJARIA or equivalent ) in floors, treads on steps and landings on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shades of the vitrified tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour,Labour cess , sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge Ground Floor
163.79
-
772.1
... More
First floor
160.46
-
790.2
... More
Second Floor
42.34
-
808.4
... More
Supplying, fitting & fixing of Double charge mat finished vitrified tile wall tile using vitrified tiles having thickness of 8mm to 10mm conforming to IS 13755 of 800mmx800mm of premium quality of approved make (JOHNSON /OASIS / SOMANY/ KAJARIA or equivalent ) laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) and filling joints with slurry including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge Ground Floor
1.02
-
873
... More
First floor
7.99
-
896.4
... More
Second Floor
1.71
-
920.9
... More
Providing 16mm. thick finished kota stone flooring using kota stone of approved quality, colour and size above 0.10 sqm in floors, treads on steps and landing on 20mm. thick bed of cement mortar mix of (1:4) with screened and washed sharp river sand for mortar and cement of approved quality, grouted with neat white cement slurry laid in proper slope joining the Kota stone with neat white cement slurry mixed with required quantity of pigment of approved marks to match the shades of the kota stone to kota colour if required, watering and curing for the required period , including cost, conveyance, loading, unloading, royalties, and taxes of all materials, cost of all labour, sundries, T&P required for the work including cost of rubbing mechanically and wax polishing etc complete in all floors at all height in all respect as directed by the Engineer-in-charge. Ground Floor
68.17
-
964.9
... More
First Floor
79.57
-
986
... More
Second Floor
136.73
-
1008.2
... More
Providing 16mm. thick finished kota stone in dado/skirting using kota stone slab above 0.10 sqm of approved quality, colour and size in dado, risers of steps on 12mm. thick bed of cement mortar mix of (1:3) with screened and washed sharp river sand for mortar and cement of approved quality, grouted with neat white cement slurry laid in proper slope mixed with required quantity of pigment of approved marks to match the shades of the kota tiles to kota colour if required, watering and curing for thr required period, including cost, conveyance, loading, unloading, royalties, and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. in all floors at all height complete in all respect as directed by the Engineer-in-charge. Ground Floor
23.43
-
1154.2
... More
First Floor
21.67
-
1184.6
... More
Second Floor
28.79
-
1216.5
... More
Providing , fitting & fixing of Tactile flooring confirming to IS 4457:2007 of approed size 300mmx300mmx15mm with button profile=10mm+4.5mm, Tac liner profile = 10mm+4.5mm, low water absorption below below 0.5% of approved make (JOHNSON /OASIS / SOMANY/ KAJARIA or equivalent ) in floors on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shades of the vitrified tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour,Labour cess , sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge. Ground floor - 3m wide corrider,2.4m wide corrider, First floor - 3m wide corrider,1.6m wide passage,2.4m wide sterile corrider, 2nd floor - 3m wide corrider,1.6m wide passage,2.4m wide sterile corrider.
66.2
-
1858
... More
Providing Mat finished Granite stone prepolished 20mm thick of area above 0.40 Sqm in flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, Labour cess ,sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. Ground Floor
723.96
-
2427.3
... More
First Floor
292.44
-
2448.4
... More
Second Floor
353.2
-
2470.6
... More
Terrace Floor
24.51
-
2493.9
... More
Providing Mat finished Granite stone prepolished 10mm thick of area above 0.40 Sqm in dado/skirting,riser of steps of approved quality, colour and size in dado/ skirting,riser of steps,wall on 12mm thick bed of cement mortar of mix (1:3) laid in proper plumb and line with screened and washed sharp sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, Labour cess ,sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge Ground Floor
6.63
-
1922.4
... More
First Floor
4.83
-
1952.8
... More
Second Floor
4.83
-
1984.7
... More
Terrace Floor
34.22
-
2018.2
... More
Fixing of Ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753 of size 30cm x 20cm / 20cm x 20cm of approved make (JOHNSON /OASIS / SOMANY/ KAJARIA or equivalent ) in dados skirting & riser of steps on 12mm thick cement plaster 1:3 joined with neat cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, royalties of all materials, labour with T&P complete in all respects as per direction of Engineer-in-Charge Ground Floor
480.14
-
1062.2
... More
First Floor
401.13
-
1092.6
... More
Second Floor
366.85
-
1124.5
... More
Supplying, fitting and fixing vetrified Industrial tiles in floors of premium grade having thickness 8mm to 10mm of size 300mm x 300mm confirming to IS 4457 with colour / printed series of approved make (JOHNSON /OASIS / SOMANY/ KAJARIA or equivalent ) on 20mm thick bed of C.M. (1:4) including cost of all materials, labour, T&P etc. required for the work in all respect as directed by the Engineer in charge Ground Floor
311.2
-
823.7
... More
First Floor
144.9
-
833.5
... More
Supplying, fitting and fixing Vitrified germ free floor tiles of 8-10mm thickness of 600 x 600mm size with water absorption less than 0.06 % and conforming to I.S. 13006 (Min thickness 9mm), breaking strength of min 1400N, with germfree property and resistance to deep abrasion of less than 144mm3 of approved make, in all colors & shade of approved make (JOHNSON /OASIS / SOMANY/ KAJARIA or equivalent ) in floors on 20mm thick bed of C.M. (1:4) (1cement:4course sand) and filling the joint with white cement mixed with pigment to match the shades of the tileincluding cost of all materials, labour, labour cess, T&P etc. required for the work complete in all respect as directed by the Engineer in charge. First Floor
53.28
-
931.9
... More
Second Floor
146.12
-
956.7
... More
Providing and laying Vitrified germ free wall tiles of 8-10mm thickness of sizes 600 x 600 mm (thickness to be specified by manufacturer), with water absorption less than 0.06 % and conforming to I.S. 13006 (Min thickness 9mm), breaking strength of min 1400N, with germfree property and resistance to deep abrasion of less than 144mm3 of approved make, in all colors & shade, in flooring & skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete First Floor
48.3
-
946.9
... More
Second Floor
71.06
-
971.9
... More
Providing and installation of Primo Premium Vinyl Sheet Flooring manufactured by Tarkett or equivalent with a nominal thickness of 2mm as per ISO 24346 - EN 428 and width of 2m as per ISO 24341 - EN 426. The nominal thickness of the wear layer shall be 2mm. The wear surface shall be PUR reinforced. Primo Premium shall conform to requirement of ISO 10581 - EN 649. Primo Premium shall have binder content of Type I as per ISO 10581, Fire resistance of 8kW/m2 as per ISO 9239-1 and Class Bfl-S1 as per EN 13501-1, Indentation of less than .03mm as per ISO 24343-1 and EN 433, Slip Resistance of R9 as per DIN 51130, greater than 0.3 as per EN 13893. The static electrical discharge shall be less than 2kV as per EN 1815. Primo Premium shall have Class A as per ASTM F24 F51 and ISO Class 4 as per ISO 14644-1 for the Clean room test. The product does not contain Pthalate based plasticizer and emission rate of VOC is very low, measured after 28 days as per EN 16516. TVOC and formaldehyde emissions are below 10µg/m3. It is 100% REACH compliant. The product is fit to be used in Class 34 in Commercial and Class 43 in Industrial as per EN ISO 10874.
The product is installed using multi coloured welding rods to ensure seamless finish. The average seam strength shall be more than 240N/50mm as per EN 684. The floor finish should terminate at the room perimeter passing over a concealed cove former and continuing up the wall for 100mm. All joints should be welded with electrodes of the same compatible material to provide a continuous sealed surface including all complete as per direction of EIC.
62.37
-
1930
... More
TORO SC (Conductive flooring for OT, ICU, Cath lab, Etc)
Providing and installation of iQ TORO SC Vinyl Sheet Flooring manufactured by Tarkett with a nominal thickness of 2mm as per ISO 24340 - EN 429 and width of 2m as per ISO 24341 - EN 426. iQ TORO SC shall conform to requirement of ISO 10581 - EN 649. iQ TORO SC shall have binder content of Type I as per ISO 10581, Fire resistance of 8kW/m2 as per ISO 9239-1 and Class Bfl-S1 as per EN 13501-1, Indentation of less than .03mm as per ISO 24343-1 and EN 433, Slip Resistance of R9 as per DIN 51130, greater than 0.3 as per EN 13893. The static electrical discharge shall be less than 2kV as per EN 1815. The electrical resistance of the product shall be less than 10^8 Ω as per EN 1081. The product does not contain Pthalate based plasticizer and emission rate of VOC is very low, measured after 28 days as per EN 16516. TVOC and formaldehyde emissions are below 10µg/m3. It is 100% REACH compliant. The product is fit to be used in Class 34 in Commercial and Class 43 in Industrial as per EN ISO 10874.
The product is installed using multi coloured welding rods to ensure seamless finish. The average seam strength shall be more than 240N/50mm as per EN 684.
The flooring should be laid on a smooth, clean sub floor which shall be prepared by self-levelling compound (Make: KERATECH ECO or equivalent) with primer (Make: A Eco or equivalent) which will perform correction of irregularities, un-even substrate, develops high levels of resistance to the solvent action of water, recyclable as an inert material, very low volatile organic compound emission etc.
214.44
-
2839
... More
Providing and installation of Homogenous Vinyl Sheet for wall with a total thickness of 1.3 mm as per ISO 24346 - EN 428, width of 2m as per ISO 24341 - EN 426, weight of 2.100 g/m2 as per EN ISO 23997.. The wear surface shall be PUR reinforced. It shall conform to requirement of wetroom as per GBR class VT. It shall have Class A as per ASTM F24 F51 and ISO Class 4 as per ISO 14644-1 for the Clean room test. he product does not contain Pthalate based plasticizer and emission rate of VOC is very low, measured after 28 days as per EN 16516. TVOC and formaldehyde emissions are below 10µg/m3. It is 100% REACH compliant. The product is fit to be used in Class 34 in Commercial and Class 43 in Industrial as per EN ISO 10874.
The product is installed using multi coloured welding rods to ensure seamless finish. The average seam strength shall be more than 240N/50mm as per EN 684
461.22
-
1350
... More
MODULAR MONOBLOCK CEILING PANELS Supply, fitting & fixing of Modular Monoblock Ceiling Panel ( inside the OT) of approved make with GP/SP Sheet of thickness 0.8 mm. The Back Sheet should be factory powder coated to prevent it from rusting. The Ceiling Panel shall be injected with Poly Urethane Foam (PUF) with a minimum density of 40 Kg/m3. The Ceiling Panel shall be sealed with Aluminum Extrusion to make the structure rigid. The Total Thickness of the Ceiling Panel shall be 50 mm. The Corner Panels for the Operation Theatre shall be made up of be made of GP/SP Sheet of thickness 0.8 mm (Front Side) and PPGI Sheet of thickness 0.8 mm (Back Side). The Back Sheet should be factory powder coated to prevent it from rusting. The Corner Panels should be factory fitted with Ducting and Return Grill Cutouts for easy connection. The Sheet shall be from any reputed make such as (TATA/JINDAL/SAIL) with all taxes complete including cost, conveyance, taxes of all materials, labour, transportation charges etc as per specification and direction of the Engineer-in-charge. Make:-United/Altos
114.14
-
5900
... More
2.5 cm thick grading concrete (1:2:2) on roof slab with 6mm size HG chips including all cost, conveyance, royalty & taxes etc.comp.to work site for new work as per the specification approved by the department & direction of E.I.C First Floor
96.66
-
318.4
... More
Terrace floor
1065.29
-
387.2
... More
Providing & applaying Sika top seal 109 HI over roof slab and parapets before application of SIKA Top seal 109HI the surface should be prime with SIKA 109HI primer , SIKA Fab 1 shall be laid between the coats of water proofing membrame , the entire application cover with SIKA TOP seal HI CC (curing compound) including cost of all materials,Conveyance, labour, T&P etc. complete in all respect as per specification and direction of Engineer-in-charge.
1161.95
-
530.22
... More
Supplying and Fixing of M.S. Window Grill made out of M.S Flat conforming to IS 2062/2006 painted with Red Oxide Primer as per the design approve by E.I.C including cost,conveyance of all materials,priming,and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge
3739.34
-
63
... More
Painting two coat with approved synthetic enamel paint to new wood & iron work including cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge. Ground Floor
25.02
-
192.7
... More
First Floor
28.5
-
196.1
... More
Second Floor
28.8
-
199.7
... More
Terrace Floor
20.88
-
203.4
... More
Sealed Automatic Hermatically glazed door Supply, instalation, fitting & fixing, testing and commissioning of Sealed Automatic Hermatically glazed door in OT of approved make to maintain sterility and the correct air pressure in the room,all doors in to and out should be of the sliding,hermetically sealing type. Track system and door blade guide system: automaticaly operated hermetically sealing sliding main door on OT, of Size 1800 X 2100 mm Door Leaf Strength of leaf core : 40mm (33mm tubular chipboard (core) + 3mm MDF (medium-density fiberboard) on both sides + 0,8mm HPL ( Steripanel High Pressure Laminate) on both sites). Circumferential profile :Anodized aluminum profile, circumferential 56 mm, V- shaped in the bottom area towards door lead on ground lobes. Surface : 0.8 mm HPL-laminate on 3 mm MDF-board as carrier material; depending on the chosen material a free passage of 1.15 m or more may require a seam in the laminate. Sealing : Rubber gaskets embedded in the door leaves press against the frame and the door, providing a hermetic sealing of the door. Rail System Guide rail : Anodized aluminum profile with two countersunk slots at 42° for carrying wheel position in closed condition. Carrying wheels : Ball bearing with duroplastic rolls. Covering : Rounded covering of extruded anodized aluminum. Ground Rail : Duroplastic lead lobes on bottom running rail. Operation Handle : Bilateral (inside/outside) stainless steel lever arm handle with integrated return spring to neutral position Frame HPL-system frame : HPL-coated embrasure board with circumferential aluminum corner protection profiles for arbitrary wall strengths with all taxes complete including cost, conveyance, taxes of all materials, labour, transportation charges etc as per specification and direction of the Engineer-in-charge. Make :- Metaflex/United/Altos
2
-
345000
... More
Providing, fitting and fixing of Wooden Lead Lined doors as per guidlines of AERB/DRS for radiation Control Farme.Farme Section shall be 120 x 70 mm of Hardwood ( Red Mirandi ), with specially designed and sandvitched with minimum 2 MM Lead Line. Farme to have single Rebate to recive the Lead Line Shutter, Frame shall be finshed to recive paint/polish as per the ashthetic demand of the project , without harming it's orignal properties, a confirmation from manufacture is required before going for any beautification. Shutter Shall be 45mm Thick, having special design consisting the 2 MM- minmum 99% pure Lead Line sandwitched in between the shutter, Core Construction shall be 6mm Ply with 2mm Lead backed by 35mm Board and outer skin to be Laminated both side 1mm each. In all doors, shutter shall be constructed in a manner so that with the permisible gap between frame jamb & door leaf , Leakge should be in permisible limit as per AERB/DRS. In case vision lite is required it shall be only Lead Glass as recomomnded by AERB/DRC including fixtures SS Ball Bearing Hinges of size 100 x 89 x 3.5mm complete with wooden Screws, Mortise Dead Lock, SS D Type Pull Handle back to back of size 300mm long, Heavy Duty Door closers, Tower Bolt, HRD anchor fastners of FISHER, cost, conveyance, cost of all Labour, Labour cess , T&P etc. complete in all respect as directed by the Engineer-in-charge. (2 MM Lead Lined Radion Control Wooden Door) ( Make: NAVAIR / GODREJ / PROMAT or equivalent)
3.24
-
36000
... More
Providing and fixing 120 minutes of metal fire rated doors as per IS 3614 part-2:1992 for stability and integrity. Pressed Galvanized steel confirming to IS 277 specification. Door tested & Approved in ARAI(Automotive Research Association of India,Pune) for maximum rating of 2hrs. Door frame shall be Double rebate profile of size 139 x 57 mm made out of 1.20mm minimum thick galvanized steel sheet depends on single & double leaf door.There should be bottom membrane in the frame for proper alignement. Provision should be kept for grouting with cement & sand slurry necessary for fire doors on the clear masonry opening. Door leaf should be 43mm thick fully flush double skin door. Door leaf shall be manufactured from 0.8 mm thick galvanised steel sheet depends on single or double leaf door. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be resin bonded honeycomb core. All doors shall be factory prepared for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. painting system will be powder coating finished.
68.4
-
17327.86
... More
Supply, fitting & fixing of Wood polymer composite (WPC) Door Frames with Rebate cuts and Assessories like - L-clamps and screw, finished cross section size 75mm x 45mm / 90mm x 50mm / 115mm x 55mm with 100% water, Termite and Borer proof with Density of 850 kg/m3, 100% recycleable, no contraction/ Expansion, Bend proof, Crack proof with 10yrs written warrantee, 100% Formaldehyde, phenol and Toxic free, swelling proof, screw holding capacity 70kg per screws with all necessary hardware fitting & fixtures etc complete as per directions of EIC.
487.2
-
721.78
... More
Providing , fitting & fixing of 34mm thick flush door shutter with 32mm thick BWR block board of Century / Green make and pasting 1 mm thick laminate with anti-bacterial property of Green Lam/ Century to be pasted with adhesive including fitting & fixing of all fixtures like SS heavy duty Aldrop, Hydraulic door clousure, SS heavy duty Tower bolt ,Vision panel , SS Door stopper,SS Shape Handle etc ( Make: Dorma)of approved make including cost of all materials, all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-Charge
249.33
-
8817.42
... More
Supplying , installation of uPVC- Casement doors made out of lead free green profiles of approved make with a GREENLINE mark with complete windload calculation as per IS:875(Part 3) justifying the profiles and reinforcements used with frame dimension 58mm x 69mm x 50mm for doors and sash dimension of 58mm x 93mm x 54mm for doors with corners fusion welded, fully reinforced with Galvanized steel of 1.2 mm to 2 mm. The sash will be fitted with 8mm clear reflective toughened glass of Saint Gobain. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The profile manufacturer should be a certified member of IGBC and should have extrusion facility in India and the Door to be assembled and installed by an authorised fabrication partner . The Door must be installed complete with all kinds of ironmongery (including EPDM gaskets,bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent. It will be provided butt hinges etc all complete as per direction of EIC. ( Make: UPVC FENESTA / Encraft / KOMMERLING or equivallent)
9.6
-
9181.92
... More
Providing and fixing of Hollow metal door at all levels from ISO 9001-2008 certified Manufacturer. All hollow metal general purpose doors with or without vision panel. Pressed Galvanised steel Single /Double leaf of required sizes consisting of frame, shutter, infill and finish as detailed below and conforming to IS 277. All doors & frames should be finished with Thermosetting weather proof Powder Coating in desired RAL Shades. Approved manufacturer which should be ISO & CE Certified & IGBC registered company. Rate should include supply and installation of door and hardware set as mentioned in the door and hardware schedule. Door frame shall be Single rebate profile of size 100 x 50 mm made out of 1.20mm thick galvanised steel sheet (18 gauge). Frames should be butt jointed and field assembled with self tabs. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Door leaf should be 44mm thick fully flush double skin door with or without vision lite. Door leaf shall be manufactured from 0.8mm (22 guage) minimum thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate Hardwares. The infill material shall be Rookwool insulation. All doors NSD 12044 should be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For pair of doors astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be as per joinery details with a screw on glass beeding on the inside. The glass should be 5mm tk clear Float glass. Hardwares should include the following:
4 nos Hinges on each leaf
1 no Door closer on each leaf, sliding door bolt and 1 no Mortice Dead lock
1 Set D-type pull handle back to back on each leaf
1 no Concealed flush bolt in inactive leaf of Double door, if any
1 no vision glass on each leaf
Fastners as required.
The rate includes design supply, installation, testing, commissioning , transportation, T&P complete in all respect as per direction of EIC. ( make: NAVAIR / GODREJ / AGNI or equivallent)
29.04
-
10600
... More
Single glaze unit- Providing and fixing factory made 3 track 3 panel uPVC white colour sliding glazed window upto 1.50 m in height comprising of uPVC multi-chambered frame having section Frame 105 mm width x 49mm Height, Glass Sash: 37mm width x 61mm Height made out of lead free green profiles of wall thickness varying from 2.4 mm with corners fusion welded, fully reinforced with Galvanized steel 1.2/2.0 mm confirming suitable wind load calculations as per IS 875 with maximum permissible deflection of 15mm for single glass and 8mm for double glass unit. The windows profile should fulfill the requirements of Viny 2010. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The window comprising of uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and including 6mm thick clear glass of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.
31.05
-
7548.65
... More
Double glazed unit- Providing and fixing factory made 3 track 3 panel uPVC white colour sliding glazed window upto 1.50 m in height comprising of uPVC multi-chambered frame having section Frame 105 mm width x 49mm Height, Glass Sash: 37mm width x 61mm Height made out of lead free green profiles of wall thickness varying from 2.4 mm with corners fusion welded, fully reinforced with Galvanized steel 1.2/2.0 mm confirming suitable wind load calculations as per IS 875 with maximum permissible deflection of 15mm for single glass and 8mm for double glass unit. The windows profile should fulfill the requirements of Viny 2010. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The window comprising of uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and including 6mm thick clear glass both side with 12mm thick air gap of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.
35.1
-
8833.8
... More
Double glazed unit- Supplying and installing uPVC- Sliding windows made out of lead free green profiles of approved make with a GREENLINE mark having two tracks and two pannels (shutters) with frame dimension of 58mm x 49mm and sash dimension of 61mm x 47mm x 37mm for windows with corners fusion welded, fully reinforced with Galvanized steel of 1.2 mm to 2 mm. The sash will be fitted with 6mm thick soft coated reflective toughened glass outer side with 10mm thick air gap and 5mm thick clear toughened glass inner side of Saint Gobain SKN 444 or equivalent . The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards.The profile manufacturer should be a certified member of IGBC/GRIHA and should have extrusion facility in India and the windows to be assembled and installed by an authorised fabrication partner . The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets,bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent including cost of all materials, all labour, sundries, T&P etc. complete in all respect as per approved drawing & direction of Engineer-in-Charge.
23.4
-
8945
... More
Single glazed casement window
Supply, Installation, Testing, commissioning of uPVC- Casement windows having section 58mm Depth x 50mm Height made out of lead free green profiles viz. Komalit Z from 'KOMMERLING, Germany" having a GREENLINE mark, of thickness varying from 2.4 mm with corners fusion welded, fully reinforced with Galvanized steel 1.2 / 2.0mm confirming suitable wind load calculations as per IS 875, part 3, 1987, with maximum permissible deflection of 15mm for single glass and 8mm for double glass unit. The windows should fulfill the requirements of Viny 2010. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The window comprising of uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and including 6mm thick clear glass of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.
4.05
-
6073.52
... More
Single glazed unit- Supplying and installing uPVC- Sliding windows made out of lead free green profiles of approved make with a GREENLINE mark having two tracks and two pannels (shutters) with frame dimension of 58mm x 49mm and sash dimension of 61mm x 47mm x 37mm for windows with corners fusion welded, fully reinforced with Galvanized steel of 1.2 mm to 2 mm. The sash will be fitted with 6mm thick soft coated reflective toughened glass ST 450 of Saint Gobain or equivalent. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards.The profile manufacturer should be a certified member of IGBC/ GRIHA and should have extrusion facility in India and the windows to be assembled and installed by an authorised fabrication partner . The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets,bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent including cost of all materials, all labour, sundries, T&P etc. complete in all respect as per approved drawing & direction of Engineer-in-Charge.
30.6
-
6518
... More
Double glazed casement window
Supply, Installation, Testing, commissioning of uPVC- Casement windows having section 58mm Depth x 50mm Height made out of lead free green profiles viz. Komalit Z from 'KOMMERLING, Germany" having a GREENLINE mark, of thickness varying from 2.4 mm with corners fusion welded, fully reinforced with Galvanized steel 1.2 / 2.0mm confirming suitable wind load calculations as per IS 875, part 3, 1987, with maximum permissible deflection of 15mm for single glass and 8mm for double glass unit. The windows should fulfill the requirements of Viny 2010. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The window comprising of uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and including 6mm thick clear glass of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.
1.35
-
8524.33
... More
Louvered ventilator
Providing and fixing factory made uPVC white colour louvered ventilator upto 1.5m in height comprising of uPVC multi-chambered frame having section 58mm width X 50mm Height , Glass Sash: 37mm depth x 61mm Height made out of lead free green profiles of wall thickness varying from 2.4 mm with corners fusion welded, fully reinforced with Galvanized steel 1.2/2.0 mm confirming suitable wind load calculations as per IS 875 with maximum permissible deflection of 15mm for single glass and 8mm for double glass unit. The windows profile should fulfill the requirements of Viny 2010. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The window comprising of uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and including 4mm thick pin headed glass of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.
18.9
-
7251.99
... More
Supplying fitting fixing Aluminum Sun Louvers 84R system comprises of 84 mm wide and 16 mm deep roll formed out of aluminum coils. In Aluminum, Panels are made of 0.5mm thick aluminum alloy 3105/3005 and Carriers are made of 0.9mm thick aluminum alloy with cut-outs to hold panels. Aluminum panel and carrier shall be polyester powder coated with 60-70 microns. Sun louver system is a vertical or horizontal wall sun shading system. The system use 84 R panels that snap into vertically mounted frames. The frames can be mounted on the exterior of a building over window openings, along balconies or over open area on a building elevation. The vertical/horizontal frames are offered in two different designs that hold the panels at different angles of 35 and 45 degrees. The ranges of angles provide air flow, sun shading, safety from rainfall and desired visibility with cost conveyance of all materials, all labour, sundries, T&P etc. complete in all respect as per approved drawing & direction of Engineer-in-Charge . ( make: HI-STEEL / ALUWOOD or equivalent )
186.61
-
2720.83
... More
Supplying, Installation, testing & commissioning of GFRC ( Glass Fibre Reinforced Concrete ) Screen/Jali of approved make of thickness 25 mm ±5 mm with border thickness of 50 ±10mm pattern, design, and colour of approved make to be fixed on/between RCC /Block work Column or structural work with Dry Fixing method with appropriate frame work, using fasteners, and necessary hardware etc. in Building Façade. The element shall be made from '53 grade' Portland Cement make Birla/ 'JK Cement' or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass fibre make 'OC' or equivalent, Super plasticisers / Additives make by 'BASF' or equivalent, Polymers make 'BASF' or equivalent and U.V resistant Synthetic inorganic pigments shall be used for pigmentation make 'BAYFERROX (Germany)' or equivalent. The material casting shall take place in Synthetic Rubber / FRP Mould manufactured by Mould / Tool / Mould Grade Resin of Revex/ 'Reckli' or equivalent complete including cost, conveyance, of all materials, labour, transportation charges etc complete in all respect as per specification and direction of the Engineer-in-charge.
77.49
-
7000
... More
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, cost of all labour,labour cess, T&P etc. required for the work complete in all respect as per direction of the Engineer-in-charge.
4957.77
-
319.8
... More
Supply and Installation of false ceiling 8 mm thick Tufbloc magnesium oxide HDFR boards of size 1200 x 2400 mm having Density-1000 kg/mt cube, with STC- 34 – 50, weight - 8.5 kg /sq mt, Fire Class - 1&P & Thermal Heat Resistance - 0.11792 W/mK Climate ( degree Centigrade , RH - 50-95 , Green VoC , RC% - Low & 30 Water resistant with wet expansion less than -0.02% from ambient to saturation, Moisture Movement - 0.02% from Anutone / Win Win / Magnum are to be fixed with Philips head screw is fixed by using concealed ceiling system. The concealed ceiling system shall include GI Wall channel(WC 25) having thickness 0.45 mm, length 3600 mm, unequal flanges of 15 & 20 mm and web of 22 mm should be fixed along the perimeters of the wall with nylon sleeves and suitable fasteners at every 300 mm centers. Then suspend Main channels(MC 45) having thickness 0.9 mm, length 3600 mm, equal flanges of 15 mm and web 45mm from the soffit at every 1200 mm centers with Suspender angle(SA 25) having thickness 0.45 mm, unequal flanges of 25 & 10 mm. GI Cross channel(CC 25) having thickness 0.45 mm, length 3600 mm, knurled web 35mm, depth of 25 mm and equal flanges 9.5 mm is fastened to the Main channel in the direction perpendicular to the Main Channel at every 600mm centers. Now the jointing & finishing of the same will be done by using Anutone jointing kit consist of powder mixed with water and apply the same with flat flap on the boards joints to finish the surface of the boards so as to look flush. Apply synthetic poly fiber PF 5 x 50 acoustic wool of 50 kg density to be kept on the top of the ceiling by laying on the framework with coist, conveyance, of all materials, labour and T&P required for the work etc. complete in all respect as per direction of Engineer-in-charge. Test certificate of the use products shall be submitted after procurement of materials. ( Make: ANUTONE TUFBLOC or equivalent)
622.79
-
1907.24
... More
Providing and fixing of Fixed Glazing with part Top hung of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS-513 of 0.6 mm thick “D” quality, galvanized as per IS-277 with zinc of 120 Gm/Sq.mtr) with paint specification being with primer of 5-7 microns and finished paint with polyster paint (Black /Pearl white/ Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46x70 mm and fixed beadings are of 18x25 mm. Top hung shutter should be of 46 x 46 mm. Accessories / gaskets are to be used as per the manufacturer’s supply and specification like handle being made of high grade aluminium powder coated and with nylon receiver and gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating. The mullion caps and louvered-clips should be of glass filled nylon. The sections are to be cut to length ,mitre joined with corner bracket and frames are fixed to the concrete/masonry walls by means of self expanding screws and glass to be used of 6 mm thick toughened reflective with all taxes complete including cost, conveyance, taxes of all materials, labour, transportation charges etc as per specification and direction of the Engineer-in-charge.
67.79
-
4867.64
... More
Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in table 300-2 for embankment construction construction & Clause 305 of MoSRT&H Specifications for Road & Bridge works (4th Revision)
153
-
20.7
... More
Construction of granular sub-base by providing Close graded Granular subbase Grading-III material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (4th Revision).
153
-
1260.2
... More
Providing and laying Plain cement concrete of proportion(1:3:6) in foundation and floors(i.e. below the base course of the flooring) using cement, 40mm. Size crusher broken H.G.Metal and screened and washed sharp river sand for mortar of approved quality and from approved quarry inclduign hoisting, lowering and laying concrete to the required level, ramming,watering and curing etc. completek to required levels, laid in layers not exceeding 15cm thick in each layer including cost, conveyance, loading, unloading,royalities and taxes of all materials, cost of all labour,T&P required for the work including shoring,shuttering anddewatering(if required)including hire and running charges of water pump required for the work etc. complete in all respect as directed by the Engineer-in-charge.
153
-
4654.6
... More
Providing and laying in position ready mixed M-30 grade with 20mm and down grade black hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per spection and the direction of the Engineer-in-charge.
204
-
5354.1
... More
Dismantling and removing RCC columns, beams, slab, staircase, landing, lintels including stacking the useful materials for reuse and removing the debris away from the site as directed by Engineer-in-charge.
42.79
-
1167.31
... More
Dismantling brick or stone masonry in lime or cement mortar above 3M heights including stacking the useful materials for reuse and removing the debris with 50M lead as directed by Engineer-in-charge.
166.86
-
1164.58
... More
Dismantling GCI / A.C. sheet roofing after careful removal of the bolts and nuts including stacking the materials for reuse and removing the debris within 50M lead as directed by Engineer-in-charge.
197.68
-
71.66
... More
Carriage of the debris by mechanical means and disposing of 5 Km away from the work site as directed by Engineer-in-charge including loading and unloading etc. complete in all respect.
269.87
-
151.17
... More
Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead
33.95
-
315.62
... More
Dismantling wrought and framed timber in roof frame work of floors after careful removal of nail, bolts etc. and stacking of the materials for reuse and removing the debris within 50m lead
112.82
-
309.36
... More
E.I. Works:-Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed make A catagory ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Havells or equievalant reputed make A catagory ISI marked as approved 6A modular type (anti bactorial & falme retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) (anti bactorial & falme retradant type) Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved of suitable size, modular box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for IPH standard hospital. All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. Group-A
80
-
546
... More
GROUP-B
50
-
774
... More
GROUP-C
45
-
1060
... More
Group control of point in Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Make- Finolex/Anchor/Polycab/HAVELLS or equievalant reputed make A catagory ISI marked as approved as approved 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Kinjal or equievalant reputed make A catagory ISI marked as approved with 6A modular type((anti bactorial & falme retradant type)) switch ISI marked Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Equievalant model) or equievalant reputed make & model A catagory ISI marked as approved of modular type G.I box with metallic cover plate (both side)(anti bactorial & falme retradant type) Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved, of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
29
-
1000
... More
Recessed wirring in existing false ceiling to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed make A catagory ISI marked as approved with 20 mm dia steel conduit ISI mark metallic conduit ISI marked Make-AKG/Anchor/Havells or equievalant reputed make A catagory ISI marked as approved 6A modular type (anti bactorial & falme retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Europa)/Havells(Equievalant model) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) (anti bactorial & falme retradant type) Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Europa)or equievalant reputed make & model A catagory ISI marked as approved of suitable size, modular box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for IPH standard hospital. All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. Group-A
20
-
501
... More
GROUP-B
20
-
650
... More
GROUP-C
18
-
843
... More
Group control of point in existing false ceiling wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Make- Finolex/Anchor/Polycab/HAVELLS or equievalant reputed make A catagory ISI marked as approved as approved with 20 mm dia steel conduit ISI mark metallic conduit ISI marked Make-AKG/Anchor/Kinjal or equievalant reputed make A catagory ISI marked as approved with 6A modular type((anti bactorial & falme retradant type)) switch ISI marked Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Equievalant model) or equievalant reputed make & model A catagory ISI marked as approved of modular type G.I box with metallic cover plate (both side)(anti bactorial & falme retradant type) Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
12
-
571
... More
Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed make A catagory ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Havells or equievalant reputed make A catagory ISI marked as approved 6A Piano type ( flame retradant type) switch ISI marked Make-Havells/Schneider/legrand /Panasonic/Anchor or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) ( flame retradant type) Make-Schneider/legrand) /Panasonic or equievalant reputed make & model A catagory ISI marked as approved of suitable size, GI box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for IPH standard hospital. All the switches & sockets should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
10
-
420
... More
GROUP-B
10
-
648
... More
GROUP-C
5
-
938
... More
Recessed wirring to group control light point/ fan point call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed make A catagory ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Havells or equievalant reputed make A catagory ISI marked as approved 6A Piano type ( flame retradant type) switch ISI marked Make-Havells/Schneider/legrand /Panasonic/Anchor or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) ( flame retradant type) Make-Schneider/legrand) /Panasonic or equievalant reputed make & model A catagory ISI marked as approved of suitable size, GI box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for IPH standard hospital. All the switches & sockets should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
12
-
938
... More
Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (anti bactorial & falme retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
40
-
192
... More
Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( (anti bactorial & falme retradant type)) with suitable size modular box & cover(anti bactorial & falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant make & model ISI marked as approved , complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 10 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
50
-
502
... More
Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)((anti bactorial & falme retradant type)) with suitable size modular box & cover(anti bactorial & falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make A catagory ISI marked as approved, (For equipement power)All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
30
-
639
... More
Supplying,fixing of 2x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+2 no 6A switch & socket(modular type) ( (anti bactorial & falme retradant type) with suitable size modular box & metallic cover plate (both side)(anti bactorial & falme retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved, (For equipement power)complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
10
-
1368
... More
Supplying,fixing of 3x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+3 nos 6A switch & socket(modular type) ( (anti bactorial & falme retradant type) with suitable size modular box & metallic cover plate (both side)(anti bactorial & falme retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved, (For equipement power)complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
12
-
1944
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLSH/LSZH insulated, copper conductor, single core cable (Finolex/Anchor/Polycab/ HAVELLS/RR KEBLE) or equievalant reputed make A catagory ISI marked as approved, in recessed PVC conduit Heavy duty FRLS of mentioned size (AKG/Anchor/Kinjal or equievalant ISI marked as approved) as required as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty flexible conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)
100
-
128
... More
2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR) (2X2.5+1X1.5)
250
-
142
... More
4 nos single core 2.5 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor .in 25 mm dia non metallic heavy duty flexible conduit(LDB to LSB/5A SOCKET) (4X2.5+2X2.5)
200
-
259
... More
2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit .(PDB to PSB/ GAYSER POINT/AC POINT/ROOM LIGHT CONTROL TO CORRIDOOR POINT/DG PANEL ESSENTIAL LOAD) (2X4+1X1.5)
250
-
159
... More
4 nos single core 4 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty flexible conduit.(PDB to PSB/GAYSER. POINT/AC POINT/DG PANEL ACCL TO EACH QTR ESSENTIAL LOAD) (4X4+2X2.5)
200
-
241
... More
2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty flexible conduit .(LFDB TO LBDB) (2X6+1X2.5)
100
-
190
... More
4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty flexible conduit.(LFDB TO LBDB/power unit/point) (4X6+2X2.5)
60
-
287
... More
4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuty conductorin 32 mm dia non metallic heavy duty flexible conduit .(LFDB TO FLOOR PANEL TO TPN BDB light ) (4X10+2X4)
60
-
415
... More
4 nos single core 16 sq. mm copper wire for phase and neutral and 02 nos of single core 10 sq. mm copper wire for earth continuty conductor in 40 mm dia non metallic heavy duty flexible conduit.(FLOOR PANEL TO TPN BDB power) (4X16+2X10)
60
-
629
... More
Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.. . Make-Legrand/Schneider/Siemens/panasonic or equievalant reputed make & model A catagory ISI marked as approved,All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
12
-
608
... More
Supplying and fixing 32 amps, 415 volts, TPN, industrial type socket outlet, with 4 pole and earth metal enclosed plug top along with 32 amps. C-series, TP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.. . Equievalant higher model of Make-Legrand/Schneider/Siemens/panasonic equievalant reputed make & model A catagory ISI marked as approved.All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
2
-
4344
... More
Supplying and fixing following size/ modules, GI box along with modular base & metallic cover plate (both side)(anti bactorial type) plate for modular switches in recess etc as required as per direction of Engg.-in-Charge. MAKE-Legrand/Siemens/Anchor/Panasonic/ Schneider or equievalant reputed make & model A catagory ISI marked as approved .All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 4 moudle(125mmx75mm)
20
-
263
... More
1 moudle(75mmx75mm)
12
-
216
... More
12 moudle(200mmx150mm)
15
-
478
... More
Supplying and fixing of following sizes of medium class PVC FRLS conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .MAKE KINJAL/ AKG/Anchor or equievalant reputed make A catagory ISI marked as approved 20 MM
88
-
94
... More
25 MM
70
-
96
... More
Supply and fixing modular type indicator on the existing switch box/cover . Equievalant higher model of Schneider/Hager/Siemens/Anchor/Panasonic make or equievalant reputed make & model A catagory ISI marked as approved as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
18
-
106
... More
Supplying and installation of AC starter Modular type, Equievalant higher model of Schneider/Hager/Siemens/Anchor/Panasonic make or equievalant reputed make & model A catagory ISI marked as approved coil voltage-415 Volt A.C. & O/L range of 9-14A range on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
12
-
618
... More
Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover. Equievalant higher model of Schneider/Hager/Siemens/Anchor/Panasonic make or equievalant reputed make & model A catagory ISI marked as approved .as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
8
-
204
... More
S/F of Bakelite angle holder/batten holder (make-Anchor/Havells/Panasonic or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
34
-
59
... More
Supplying,fixing of Blanking plate(modular type)( (anti bactorial & falme retradant type)) in existing switch box(anti bactorial & falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision), complete suitable for IPH standard hospital.It should be warrantied for a period of 10 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
24
-
42
... More
Sub-Head II (Light fitting Fixture & Fan) Supplying, installation, of exhaust fan of heavy duty 300 mm sweep (Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Usha or equievalant reputed make & model A catagory ISI marked as approved ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 5 years.
10
-
3070
... More
Supplying, installation, of exhaust fan of heavy duty 380 mm sweep 1400 rpm with louvers Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Usha or equievalant reputed make & model A catagory ISI marked as approved ) of exhaust fan in the existing wall, including fixing & conntection .as required as per direction of Engg.-in-Charge. Replacement Warranty will be 5 years.
6
-
3621
... More
Supplying, installation, testing and commssioning of 1400 mm sweep white/milky colour ceiling fan Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Usha or equievalant reputed make & model A catagory ISI marked as approved ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required.(With fan Regulator) as required as per direction of Engg.-in-Charge.Replacement Warranty will be 5 years.
10
-
2124
... More
Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Ushaor equievalant reputed make & model A catagory ISI marked as approved ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 5 years.. .(With fan Regulator)
30
-
2112
... More
Supplying and fixing of Energy efficient Recess mounted LED luminaire made up of CRCA powder coated sheet steel housing of 595 X 595 mm x 70 mm size with of not more than 25W and system lumens output not less than 3250 lumens (130 lm/ wt) with diffusers for better light transmission and pure effect with High luminous flux LEDs for better light output, CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%,internal surge protection of 3 KV, complete with Non integrated isolated electronic driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation)and all other accessories suitable for operation on140- 270 V, 50 Hz ,L70 @50,000 burning hrs (5 years warranty)supply .as required as per direction of Engg.-in-Charge (Make: Panasonic Model no. PBLM21258 or similar model of LT/Trilux /Philips/Wipro or equievalant reputed make & model A catagory ISI marked as approved.) . The luminaire must be Replacement Warranty will be 5 years.
10
-
2672
... More
Supplying and fixing of Energy efficient recessed mounted LED luminaire made up of CRCA powder coated housing, Top opening clean room LED luminaire of 600 X 600 x 65 mm size with of 45 W and system lumens output not less than 4500 lumens , IP65 ,dust free & zero maintenance , anti glare high transmittance PMMA diffuser , operating volatge range 150-265 V, high performance potentiometric electronic driver for zero maintenance , 2.5 KV internal urge protection, L70 B 50: 50,000 hrs., CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%,,IP 65 protection complete with all other accessories suitable for operation on 230 V, 50 Hz supply as required as per direction of Engg.-in-Charge. (Make:Panasonic model no: PCRM04458 or similar similar model of /PHILIPS/ /wipro or equievalant reputed make & model A catagory ISI marked as approved ) .The luminaire should be Replacement Warranty will be 5 years. .Each CLEAN ROOM FITTING FOR OT ICU MRI CT.
5
-
5601
... More
Supplying and fixing of Energy efficient surface mounted square shape 20 W LED luminaire of dimension of 225x 225 x 35 mm consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 20 watt and lumen output of 1500 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 2.5 KV , L70 B50: 30000 hrs (2 yrs warranty) and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. ( Make : Panasonic Model No: PDLM11206BS similar model of /Trilux/Osram/PHILIPS/Wipro or equievalant reputed make & model A catagory ISI marked as approved).The luminaire should be Replacement Warranty will be 5 years
25
-
1513
... More
Supplying and fixing of Energy efficient recess mounted LED luminaire with white powder coated ,pressure die-cast Al housing ,with high transmititivity,non-yellowing PMMA diffuser, with wattage not more than 20 watt and lumen output not less than 2600 Lumen ( 130 lumens/watt ) of size 595 x595 x 70 mm , ,CRI not less than 80,CCT of 5700-6500 degree K,THD less than 10%, with Non integrated isolated driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation), all other accessories , life : 50,000 burning hours (5 years warranty) , Internal surge protection of 3 KV suitable for operation on 230 V, 50 Hz supply as required as per direction of Engg.-in-Charge. ( Make : Panasonic Model No:PBLM21208 similar model of of LT /Wipro/PHILIPS or equievalant reputed make & model A catagory ISI marked as approved.) The luminaire should be Replacement Warranty will be 5 years.
25
-
2423
... More
SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 5 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Similar to Panasonic Model No. PBTM08208 or similar model of /PHILIPS/LT/wipro or equievalant reputed make & model A catagory ISI marked as approved.). The luminaire should be Replacement Warranty will be 5 years .
43
-
792
... More
SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge.
( Make : WIPRO Model No:LL20-111-XXX-60-NE or similar model of PHILIPS/Panasonic or equievalant reputed make & model A catagory ISI marked as approved. )The luminaire should be Replacement Warranty will be 5 years
18
-
727
... More
SITC of IP 20 Non-integral flexible LED strip light,High optically efficient diffuser,, 4000K with 12 w/mtr @ 5Mtr pool with Driver extra as required as per direction of Engg.-in-Charge ( Make : Panasonic Model No:PSLM06604 with Driver model no.PSL0S6003 or similar model of /PHILIPS/Wipro or equievalant reputed make & model A catagory ISI marked as approved. )The luminaire should be Replacement Warranty will be 5 years
1
-
2111
... More
Supplying and fixing of small focus light for small monuments as 30W , 5700 K required as per direction of Engg.-in-Charge Make : Panasonic Model NO: PFLM11308 or similar model of /PHILIPS/LT/WIPRO or equievalant reputed make & model A catagory ISI marked as approved.)The luminaire should be Replacement Warranty will be 5 years
1
-
3946
... More
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge .
(Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.
100
-
32
... More
BDBS,DB,AC DB,FLOOR PANELS,MCBS Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant reputed make & model A catagory ISI marked as approved. as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 5 years 4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door(FOR LIGHT,POWER INDOOR,3-PH,POWER LOAD) Warranty on DB is 2 years.
6
-
2159
... More
Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) (ALL LIGHT WITH CORRIDOOR/COMMON AREA,EM LIGHT,UPS LOAD, EM LOAD LIGHT LOAD,POWER LOAD )
3
-
1897
... More
2+4 way MCB Enclosure DB (GLAZED door)(only each EM. CONNECTION UPS LOAD)
2
-
1624
... More
8 Way(8+24) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door(FOR LIGHT,POWER INDOOR,3-PH,POWER LOAD)
6
-
2694
... More
Supplying and fixing 20 amps rating, 240 volts, C series, Double poles MCB of Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 5 years .MCB should have the fault indication system in different colour for ON, OFF & TRIP condition or Mid trip position for Trip conditions for easier identification of fault.Warranty on MCB is 5 years.
4
-
332
... More
Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant reputed make & model A catagory ISI marked as approved. the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 5 years.MCB should have the fault indication system in different colour for ON, OFF & TRIP condition or Mid trip position for Trip conditions for easier identification of fault.Warranty on MCB is 5 years.
200
-
131
... More
Supplying and fixing 40 Amps rating, TPN, 415 volts, RCCB,300mA .Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .(4W TPN BDB IC)AC ODU CONTROLLER). The RCCB should be Replacement Warranty will be 5 years
6
-
2239
... More
Supplying and fixing 25Amps DP 240 volts, RCCB,300mA Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABBor equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 5 years
4
-
1685
... More
Supplying and fixing 40Amps DP 240 volts, RCCB,300mA Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 5 years
4
-
1922
... More
Supplying and fixing 63Amps DP 240 volts, RCCB,300mA Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.The RCCB should be Replacement Warranty will be 5 years
4
-
2217
... More
Supplying and fixing 63Amps TPN 415 volts, RCCB,300mA Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.(for power BDB & AC ODU, 8 way TPN BDB IC).The RCCB should be Replacement Warranty will be 5 years
6
-
2635
... More
(Earthing) INSTALLATION S/IT/C Of Earthing with copper earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-Charge. The entire earthing system should be Replacement Warranty will be 5 years
2
-
10389
... More
S/IT/C of materials and installation of pipe earth electrode made out of 50mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ termination of G.I. flat / wire with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.The entire earthing system should be Replacement Warranty will be 5 years
2
-
2462
... More
Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge.
188
-
94
... More
Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
21
-
1093
... More
Providing and fixing 50mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
8
-
2026
... More
Supplying and making brick massonary pedastal with extra super structure including cement plastering etc as required as per direction of Engg.-in-Charge.
1
-
2700
... More
CABLING AND END TERMINATION MAIN AREA Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade POLYCAB/HAVELLS/Finolex or equievalant reputed make ISI marked as approved of following size cables as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials 3.5core x 240 sq mm ( TO MAIN PANEL )
50
-
1104.6
... More
3.5core x 120 sq mm ( DG PANEL1 RUNS )
50
-
595.82
... More
Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade POLYCAB/HAVELLS/Finolex or equievalant reputed make ISI marked as approved of following size cables as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials 3.5core x 95 sq mm ( FOR FDB 1F,2F, POWER )
22
-
475.31
... More
4core x 16 sq mm (FDB LIGHT 1 RUN UPTO 1F )
22
-
145.61
... More
4 core x 4 sq mm (for small power)
21
-
87.87
... More
3.5core x 35 sq mm (To FDB LIGHT / power BDB/UPS PANEL,separate panel for OT Complex,MCU)
22
-
218.41
... More
LAYING OF CABLE- Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
9
-
126
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 120 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
30
-
141
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 120 SQ. MM but not exceeding 400 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
40
-
155
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
10
-
40
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
12
-
55
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in open duct etc as required as per direction of Engg.-in -charge.
12
-
44
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM in open duct 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
30
-
44
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
24
-
78
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 120 SQ. MM From 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
12
-
125
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 400 SQ. MM From 120 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
8
-
127
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge. 3.5 core x240 sq mm
4
-
715
... More
4 core x16sq mm
4
-
191
... More
3.5 core x35 sq mm
4
-
320
... More
3.5 core x95 sq mm
4
-
393
... More
3.5 core x120 sq mm
4
-
510
... More
Providing,fixing and laying of following dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. 50 mm dia
8
-
408
... More
Providing,fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. 200 mm dia
55
-
829
... More
MAIN CONTROL PANEL AT GF- S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by siemens gray powder cote paint is designed as G.A drawing as per direction of Engg.-in-Charge.Warrentee period of replacement of panel & accessories must be 5 years & compelete test certificate must be submitted along with panel board including component list.
1
-
269933
... More
CABLE TRAY /RACE WAY FOR DISTRIBUTION OF POWER HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x 200mm(W), of Legrand - Cablofil make or equievalant reputed make & model A catogory, ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge. Warrentee period oftray must be 5 years & compelete test certificate must be submitted .
8
-
595
... More
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x 300mm(W), of Legrand - Cablofil make or equievalant reputed make & model A catogory, ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge. Warrentee period oftray must be 5 years & compelete test certificate must be submitted .
12
-
690
... More
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x 400mm(W), of Legrand - Cablofil make or equievalant reputed make & model A catogory, ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge. Warrentee period oftray must be 5 years & compelete test certificate must be submitted .
8
-
913
... More
GALVANIZED(GC) AS PER EN-ISO-1461 , FLOOR RACE WAY WITH JUNCTION with internal dimensions of size 38mm(H) x 225mm(W), of reputed make ISI marked as approved .(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge.(3 COMPARTMENT TOTAL 54 MM HEIGHT,COST WITHOUT GST,WITH LESS DISCOUNT(REPUTED FACTORY MADE ISI MARKED)
15
-
1782
... More
Fire Man Switch: Fire Man Switch at Main Landing Terminal.
1
-
2364675
... More
STREET LIGHT SYSTEM- Supplying, Erection, Fixing, connection & testing of LED BOUNDRY WALL Light of elegant look Panasonic/philips/wiproor equievalant reputed make & model A catogory, ISI marked as approved 35 W LED street light having die cast aluminium housing with toughened glass having lumen efficacy of 110 lm/w or more (As per LM 79 report of third party NABL lab) ,IP 65 protection or more , LED street light model will be vide Panasonic model no. PSTM27358 or its equivalent of Philips/LT/WIPRO make or equievalant reputed make A catagory ISI marked as approved having warrantied for a period of 5 years . The luminaire should be supplied along with bracket maintenance free for inspection as required as per direction of Engg.-in-Charge.
2
-
3102
... More
Supply of materials and installation of pipe earth electrode made out of 50mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ termination of G.I. flat / wire with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.The entire earthing system should be Replacement Warranty will be 5 years
2
-
2462
... More
Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required as per direction of Engg.-in-Charge.
45
-
94
... More
Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
8
-
1093
... More
S/I/T&Commissioning of LT OUT DOOR FLOOR mounted cubical type MCB ENCLOSURE made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. (FOR USE) with 20A TPN MCB 01 NOLegrand/Schneider/L&T/ABB or equievalant make & model as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period 2 years of acceptance of materials
1
-
2044
... More
Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials
50
-
104
... More
AIR TERMINAL & ACCESSORRIES LIGHTNING ARRESTER+ MAST: Providing and fixing of lightning conductor finial made of 25 mm dia 300 mm long, G.I tube,having single prong at top, with 85 mm dia 3 mm thick G.I base plate including holes etc complete as required with as per direction of Engg.-in-Charge.(RATE REFERING OSR 2018 SOR NO-4.2) .The entire LA system should be Replacement Warranty will be 5 years
4
-
372
... More
Reveting, sweating and soldering of copper / G.I. tape ( with another copper / G.I. tape, base of the finial or any other metallic object) as required .as per direction of Engg.-in-Charge. (RATE REFERING OSR 2018 SOR NO-4.4) The entire LA system should be Replacement Warranty will be 5 years
12
-
136
... More
Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run) as per direction of Engg.-in-Charge.(RATE REFERING OSR 2018 SOR NO-4.7) The entire LA system should be Replacement Warranty will be 5 years
12
-
57
... More
Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For virtical run) as per direction of Engg.-in-Charge. (RATE REFERING OSR 2018 SOR NO-4.8) The entire LA system should be Replacement Warranty will be 5 years
12
-
94
... More
Providing and fixing of testing joint, made of 20 mm x 3 mm thick G.I. strip, 125 long with 4 nos of G.I. bolts, check nuts and spring washer etc complete as required as per direction of Engg.-in-Charge. (RATE REFERING OSR 2018 SOR NO-4.12) The entire LA system should be Replacement Warranty will be 5 years
4
-
62
... More
Providing and laying of G.I. tape 32 mm x 6 mm from earth electrode directly in ground as required as per direction of Engg.-in-Charge. .(RATE REFERING OSR 2018 SOR NO-4.14) The entire LA system should be Replacement Warranty will be 5 years
4
-
91
... More
Maintenance free Safe Earthing Electrodes with ISI G.I. pipe dia 75mm as Secondary electrode with wall thickness of 2.6 mm and the Primary Earthing Electrode will be 50mm X 6mm X 1no M.S. hot dipped galvanized strip filled with a highly conductive & non-corrosive compound in between the Primary Earthing and the secondary Earthing, the Surface Area in will be 7,06,500sqmm for 3mtrs length and Cross Sectional Primary conducting area is 300 sq.mm. An Solid G.I. Base plat seals the unit at the bottom. as per direction of Engg.-in-Charge. (MES-GFC ground Filling compound will be provided in 25 kgs Bags.)(MES-GFC ground Filling compound will be provided in 25 kgs Bags.)(2 bags required for each earthing electrode.)(FOR lightening protection & Building Electrification).The entire earthing system should be Replacement Warranty will be 5 years.Make-OBO/Star-x/ABB or equievalant reputed make & model A catogory.
1
-
13957
... More
EPABX SYSTEM- Supply,installation, testing and commissioning of 4 P&T & 14 Extensions Hybrid EPABX System
1
-
13500
... More
Supply,installation, testing and commissioning of RJ11 Modular Complete in concealed manner including termination of cable
8
-
450
... More
Supply & Laying of 2 Core 0.5mm telephone cable using Rigid PVC Pipe in concealed manner per running metre of cable laid.
299
-
65
... More
Supply,installation, testing and commissioning of Electronic Push Button Telephone with Caller ID
14
-
700
... More
Supply,installation, testing and commissioning of GSM FCT Terminal
1
-
3500
... More
Supply,installation, testing and commissioning of Lightening Protector for P&T Lines
1
-
1150
... More
Supply,installation, testing and commissioning of 12v 7 Ah Battery including termination
1
-
1250
... More
LAN SYSTEM Supply,installation, testing and commissioning of RJ45 Modular Complete in concealed manner including termination of cable
10
-
450
... More
Supply & Laying of Cat 6 cable using Rigid PVC Pipe in concealed manner per running metre of cable laid.
300
-
70
... More
Supply,installation, testing and commissioning of Patch Panel, 6U Rack, Cable Manager, Cooling Fan x 2 Nos., Earthing Kit, Power Manager
1
-
6599
... More
Supply,installation, testing and commissionining of 1 Mtr Patch Cord
8
-
190
... More
Supply,installation, testing and commissionining of 3 Mtr Patch Cord
8
-
240
... More
CCTV SYSTEM- Supply,installation, testing and commissioning of 8 Channel DVR with 2 Sata Ports
1
-
10000
... More
Supply,installation, testing and commissioning of 4 MP Dome / Bullet Camera with 25 Mtrs IR Range
12
-
7500
... More
Supply & Laying of RG59+ 3 Core cable using Rigid PVC Pipe in concealed manner per running metre of cable laid.
398
-
70
... More
Supply,installation, testing and commissioning of BNC & DC Connectors
12
-
75
... More
Supply,installation, testing and commissionining of 4 TB CCTV Surveillance Hard Disk
1
-
9500
... More
Supply,installation, testing and commissionining of 10 Amps Power Supply
1
-
4500
... More
Supply,installation, testing and commissioning of Smart 32" LED Monitor
1
-
25000
... More
Supply,installation, testing and commissioning of 10 Mtrs HDMI Cable
1
-
12000
... More
Supply,installation, testing and commissioning of Bird Canopy
12
-
750
... More
Supply,installation, testing and commissioning of Wireless Mouse
1
-
750
... More
Fire Fighting works -Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for nclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered with anti vibration pads.as per direction of Engineer-in- charge.(Make:Kirloskar/ Wilo/KSB or equievalant ) 1620 lpm at 56 m Head
1
-
250000
... More
Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm
thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. of Engineer-in-charge..(Make:PUMP:KBL/ Grundfos / KSB/Wilo) (Disel Engine: KBL/Greaves cotton) 1620 lpm at 56 m Head
1
-
450000
... More
Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.
Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads.(Make:Kirloskar/ Wilo/KSB or equievalant ) 180 lpm at 56 m Head
1
-
78960
... More
Supply,Installation,Testing & Commissioning of dust and vermin proof front operated compartmentalised cubicle type control panel suitable for operation on 415 Volt, 3 ph, 50 c/s power supply with 630 Amp TPN Aluminium busbar fabricated out of 2 mm thick CRCA sheet duly powder coated after treatment in 7 tank process with top entry cable gland plate including interconnections, earth bus as required comprising of :
INCOMING: One(1)- 400 Amp 36 KA TPN MCCB with microprocessor release, O/L, S/C and E/f release, Voltmeter with s/s, Ammeter with S/s, 3 Nos 630/5 metering CTs of Class 1.0, ON/ OFF indicating lamps, 3 Nos Phase indicating lamp and 4P 6A MCB OUTGOING: a)Two(2)-250 Amp MCCB, with star delta starter suitable for motor with O/L release, ON/ OFF push button, ON/ OFF indicating lamp, 3 Nos CTs metering CTs 250/5, Ammeter S/S.
b) 2 No (Outgoing) – 63 Amp MCCB, with star delta starter suitable for motor with O/L release, ON/ OFF push button, ON/ OFF indicating lamp,3nos 50/5 CT,Ammeter,S/S
c) 1 Set – Relay, Auto/ Manual Selector Switch, Battery Charger, Annunciation Panel, Control wiring of pressure switches, flow switches and starters etc as required for auto and manual operation of Jockey pumps, Main Electric Pumps and Diesel Engine Pump as per direction of Engineer-in-charge.d)1 lot control wiring from pressure switch to panel board through auxiliary contactor with 1.5 sq. mm unarmoured PVC insulated ,PVC sheathed copper cable etc as required.(Make:Utkal/ ASES or equievalant ) PANEL AS ABOVE
1
-
200000
... More
Supply, installation, testing and commissioning of Floor/Wall mounted sectionalised, front operated top entry dust and vermin proof M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrinkable PVC sleeve, base frame, complete with all accessories including interconnections, earth bus etc as required comprising of. One (1)- 63 Amp, 10 KA,TPN (Class-C) MCB with 3 Nos Phase indicating lamps with control fuse/ MCB, Digital Voltmeter with selector switch. DOL starter with O/L and Single Phasing Preventor suitable for motor. ON/OFF indication lamps, Auto manual switch and ON/OFF push button.(Make:Utkal/ ASES/POWERMAX or equievalant )
2
-
35111
... More
Supply & Laying of XLPE power cable of 1.1 KV grade of following size on Cable.(Make:FINOLEXl/ POLYCAB / RR or equievalant ) 3C x 70 sqmm
20
-
223
... More
3C X 16 sqmm
20
-
88
... More
Supplying instalaltion hot dip galvanized ladder type cable tray of following size including installation along wall/ suspended from ceiling with brackets/ threaded suspenders including bends etc as required.(Make:FINOLEX/ POLYCAB / RR or equievalant ) 150 mm (W) X 50 mm (H) with 1.2 mm thick sheet
20
-
947
... More
450 mm (W) X 50 mm (H) with 1.6 mm thick sheet
10
-
2089
... More
Laying & fixing of one no. PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size on Cable Tray as required.s per direction of Engineer-in- charge.(Make:FINOLEX/ POLYCAB / RR or equievalant ) Upto 35 Sqmm
20
-
33
... More
Above 35 Sqmm and upto 95 sqmm
20
-
74
... More
Supply & Making end Termination with brass compression gland and aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade (without cost of Cable) 3C X 70 sqmm
8
-
340
... More
3C X 16 sqmm
8
-
222
... More
Supply,Installation,Testing & Commissioning of 'C' Class heavy duty MS pipe (as per IS 1239 upto 150 mm NB and IS 3589 for above 150 mm 6mm thick) with flanges and fitting such as bends, tees, reducers, rubber insertions and galvanized nuts and bolts of following size on surface along wall / shaft with MS bracket, suspended from ceiling/ beam with suspenders duly painted with two coats of primer and finished with enamel paint of approved colour laid through pipe or in trench after wrapping with hassen cloth after applying coal tar primer as required as per direction of Engineer-in- charge.(Make:TATA/JINDAL/SAIL) 25mm NB
150
-
342
... More
32mm NB
105
-
487
... More
40mm NB
70
-
827
... More
50mm NB
60
-
1015
... More
65mm NB
60
-
1300
... More
80mm NB
50
-
1821
... More
100mm NB
60
-
2520
... More
150 mm NB
90
-
2700
... More
200mm NB
6
-
2950
... More
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.as per direction of Engineer-in- charge.(Make:TATA/JINDAL/SAILor equievalant ) 150mm NB
70
-
2812
... More
Providing, fixing, testing and commissioning of following size manually operated hand lever type cast iron double flanged slim seal wafer type Butterfly valves with EPDM iron disc as per IS-13095 having pressure ratting PN -1.60 including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure etc. all complete as per specification & direction of E.I.C.(Make:KARTAR/ZOLOTOLor equievalant ) 80mm NB
4
-
3719
... More
100mm NB
4
-
5300
... More
150mm NB
7
-
6625
... More
Providing, fitting & fixing of following size cast iron double flanged type dual plate Non return Valve as per IS- 5312 (Part 1): 2004 with ISI mark of pressure ratting PN-1.60 including fixing the same with supply of required jointing materials like flanges, rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure etc. all complete as per specification & direction of Engineer-in-charge. (Make:KARTAR/ZOLOTOL/SSANT or equievalant ) 80mm NB
1
-
4700
... More
100 mm NB
1
-
5100
... More
150mm NB
2
-
8700
... More
Supply,Installation,Testing & Commissioning of Pressure gauge of 0-16 Kgf/sq.cm. range with cut-off bronze ball valves of suitable size with all accessories as per direction of Engineer-in-charge(Make:KARTAR/ZOLOTOL/SSANT or equievalant ) .
3
-
1000
... More
Supply,Installation,Testing & Commissioning of Pressure Switch with cut-off bronze ball valves with integral strainer & flare nut (mixed ends) of suitable size with all accessories as per direction of Engineer-in-charge.(Make:KARTAR/ZOLOTOL/SSANT or equievalant )
3
-
3360
... More
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out
of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flangeas per direction of Engineer-in-charge.(Make:KARTAR/ZOLOTOL/SSANT or equievalant ) 150mm NB
1
-
19574
... More
Supply,Installation,Testing & Commissioning of Air vessel made of 250mm dia, 8mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia Gun metal wheel valve, with required accessories, pressure gauge and painting with synthetic enamel paint as required.
1
-
37866
... More
WET RISER CUM DOWN COMER SYSTEM Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming
to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :(Make:KARTAR/ZOLOTOL/SSANT or equievalant )
7
-
5325
... More
Supply,Installation,Testing & Commissioning of SS short branch pipe with 63 mm male inlet and 19 mm outlet nozzle, as per IS:903 and as per direction of Engineer-in-charge.
7
-
2139
... More
Supply,Installation,Testing & Commissioning of 63 mm NB and 15meter long RRL Fire Hose fitted 63mm intstantaneous stainless steel male & female SS coupling, complete by GI wire binding for Internal Hydrant as per direction of Engineer-in-charge.(Make:KARTAR/ZOLOTO/SSANT or equievalant )
14
-
5725
... More
Providing supply & fixing of MS Hose Box for of suitable size(750X600X250mm) to accomodate 2 nos. of 15/ 1 no of 30 mtr long fire hose and a branch pipe, wall mounted type as per direction of Engineer-in-charge.(Make:KARTAR/ZOLOTO/SSANT or equievalant )
7
-
3500
... More
Supply,Installation,Testing & Commissioning of Swinging pattern wall fixing first aid hose reel made from MS sheet and waterways and moving parts with rubber hose of 20 mm dia. and 30 mtrs. long with ABS(Plastic) shut-off nozzle as per IS: 444/IS: 12585 Type-I., complete with all accessories as per direction of Engineer-in-charge.(Make:KARTAR/RR/CRON or equievalant )
3
-
7758
... More
Providing, fitting and fixing of C.I. 25 MM single air relief valve with stop cock confirming to IS:14845/2000 with ISI mark for water works purpose including fixing the same with hydrant riser including testing & commissioning the system etc. all complete as per approved specification & direction of Engineer-in-charge. (Make:KARTAR/ZOLOTO/SSANT or equievalant )
2
-
2171
... More
Providing, fitting & fixing of 4-Way GM fire brigade connection consisting of 63 mm dia instantaneous type male couplings with built-in check valves, 150mm dia flanged outlet complete with bolts, nuts and rubber insertions confirming to IS:904 with ISI mark including testing & commissioning the system etc. all complete as per apporoved specification & direction of EIC. (Make:KARTAR/ZOLOTO/SSANT or equievalant )
2
-
16765
... More
SPRINKLER SYSTEM Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :Pendent / Upright Sprinkler direction of EIC. (Make:KARTAR/ZOLOTO/SSANT or equievalant )
150
-
350
... More
Providing & fixing of Water Flow Switch switable for pipe 100 mm Diameter with all accessories for all floors etc. all complete as per direction of Engineer-in-charge.(Make:KARTAR/ZOLOTO/SSANT or equievalant )
1
-
7480
... More
Providing, laying, testing & commissioning of Flexible Sprinkler Hose Corrugated Unbraided type of length 1mtr for Fire Sprinklers, with 1'' Inlet Nipple BSPT,1/2" Outlet Reducer BSPT,0.7 m Square Supports Bar & Brackets(UL Listed) with all complete accessories as per direction of Engineer-in-charge.(Make:KARTAR/ZOLOTO/SSANT or equievalant )
100
-
1679
... More
EXTINGUISHER SYSTEM Portable Fire Extinguisher System Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made from ISI marked seamless cylinder confirming to IS: 7285, fitted with ISI marked controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket as per direction of Engineer-in-charge. (Make:CS-FIRE/SUNMAX/CANEXE or equievalant )
6
-
6300
... More
Supplying, installation, testing and commissioning of ABC type fire extinguishers of 6 kg capacity including cost of all material & labour etc complete.
6
-
3264
... More
Supplying, installation, testing and commissioning of Mechanical Foam type 9 litre capacity Fire Extinguisher, ISI marked, IS: 10204, containing 540 ml AFFF liquid ISI marked, IS: 4989 Part II and a polyurethane coated CO2 Gas Cartridge, ISI marked, IS: 4947 complete with gunmetal union cap, nylon hose with plastic foam making branch and wall mounting bracket as per direction of Engineer-in-charge.
2
-
4000
... More
AUTOMATIC FIRE DETECTION SYSTEM Supplying, installation, testing and commissioning of Intelligent Combination Heat potoelectric Smoke Detector, Intelligent Combination Heat Photoelectric Smoke Detector, With Remote Indicator Output and Magnetic Test Function, Without base (Certified by LPCB) Common Detector Base, Common Detector Base for DI-910xE Series Detectors and for DC-910xE series Detectors using EOLR as per direction of Engineer-in- charge. (Make:GST/HONEY-WELL/COOPER or equievalant )
100
-
3515
... More
Supply Installation testing and commissioning of Loop Realay Module, Extend Loop Distance and Increase Current Capacity, 24VDC required.as per direction of Engineer-in- charge. (Make:GST/HONEY-WELL/COOPER or equievalant )
1
-
41350
... More
CONTROL PANEL Providing S.I.T.C of Microprocessor based Addressable Fire Alarm Control Panel (2 Loop) Intelligent Fire Alarm Control Panel Two loops with capacity of 477 devices. Flush-mount new structure. 30 Zones, Integrated Wide range PSU (100-240V) with Battery Charger with 2 nos 12volt 9 AH Batteries (Certified by LPCB)as per direction of Engineer-in- charge. (Make:GST/HONEY-WELL/COOPER or equievalant )
1
-
167140
... More
Supplying, installation, testing & commissioning of Addressable Single Output Module,Single Output Module, provides dry contact (Loop powered) or active output (24VDC required, cable monitored) (Certified by LPCB)as per direction of Engineer-in- charge. (Make:GST/HONEY-WELL/COOPER or equievalant )
2
-
6047
... More
MCP Supplying, installing ,testing and commissioning of Digital Manual Call Point, Flush mount Resettable (Non-Breaking Glass), Supplied with surface mount back box and Special Reset Key, Optional Accossories:4556356, 4556520(Certified by LPCB) as per direction of Engineer-in- charge. (Make:GST/HONEY-WELL/COOPER or equievalant )
15
-
5358
... More
Electronic Hooters- Supplying, installing ,testing and commissioning of Intelligent Sounder Strobe, Addressable Sounder with Visible Indicator, 16 tones, high/low consumption modes, can be loop owered or 24VDC powered, 83-89dB (Certified by LPCB) as per direction of Engineer-in- charge. (Make:GST/HONEY-WELL/COOPER or equievalant )
15
-
8608
... More
Wiring - Supplying and drawing of 2X1.5 sq.mm PVC insulated PVC Sheathed FRLS copper cable with 20 mm dia medium class PVC conduit surface/ recessed conduit with all accessories as per direction of Engineer-in-charge.(MakeFINOLEX/POLYCAB/RR or equievalant )
500
-
151
... More
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable,600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required as per direction of Engineer-in-charge.
400
-
133
... More
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated, sheet cover in front including painting etc. as required. 100 mm X 100 mm X 60 mm deep.as per direction of Engineer-in-charge.
80
-
125
... More
Supplying and fixing PVC box of following sizes (nominal size) on surface or in recess with sheet cover in front including painting etc. as required. 100 mm X 100 mm as per direction of Engineer-in-charge..
20
-
72
... More
Supply Installation of Sinage floor, entery Exit, Stair cass,Lift and other.as per direction of Engineer-in-charge.(Make:COOPER/ASES or equievalant )
1
-
20000
... More
P.H. Works:-Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipes conforming to pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge. In ground floor. 20mm dia CPVC pipe
38
-
240.5
... More
25mm dia CPVC pipe
45
-
328.8
... More
32mm dia CPVC pipe
20
-
496.6
... More
In First floor 20mm dia CPVC pipe
35
-
248.5
... More
25mm dia CPVC pipe
50
-
336.8
... More
32mm dia CPVC pipe
20
-
505.8
... More
In second floor .20mm dia CPVC pipe
30
-
256.5
... More
25mm dia CPVC pipe
47
-
344.8
... More
32mm dia CPVC pipe
10
-
515
... More
Supplying all materials, labour,T&Pand providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/04 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge.In Ground Floor-32mm dia PVC ASTM Pipe
80
-
243.4
... More
40mm dia PVC ASTM Pipe
95
-
320.2
... More
In 1st Floor- 32mm dia PVC ASTM Pipe
60
-
251
... More
40mm dia PVC ASTM Pipe
60
-
329.7
... More
In 2nd Floor-32mm dia PVC ASTM Pipe
60
-
258.5
... More
40mm dia PVC ASTM Pipe
60
-
339.3
... More
In 3rd Floor-40mm dia PVC ASTM Pipe
40
-
348.9
... More
50mm dia PVC ASTM Pipe
120
-
432.9
... More
Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar ( 1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. In Ground Floor
28
-
46.3
... More
In 1st Floor
28
-
47.2
... More
In 2nd Floor
23
-
48
... More
Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. In Ground Floor
12
-
155
... More
In 1st Floor
12
-
155.7
... More
In 2nd Floor
8
-
156.6
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per the direction of the Engineer in charge. In Ground Floor
95
-
171.9
... More
In 1st Floor
95
-
176.8
... More
In 2nd Floor
75
-
182.2
... More
Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge. 250mm to 375mm thick wall.In Ground Floor
38
-
193
... More
In 1st Floor
38
-
193
... More
In 2nd Floor
32
-
193
... More
Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge.15mm dia CP bib cock Jaquar CON-CHR-037KN make
2
-
1082.8
... More
15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make)
22
-
1451.9
... More
15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)
66
-
861.3
... More
20mm dia CP concealed stop cock(Con-CHR083KN Jaquar make)
9
-
1132
... More
15mm dia CP two way bib cock (Con-CHR-041KN Jaquar make)
33
-
1255
... More
15mm dia CP Health faucet (Con-ALD-CHR-573 Jaquar make)
33
-
1599.5
... More
15mm dia CP Pillar cock with Extended Lever Handle (FLR-CHR-5031 N) Jaquar make)
39
-
2140.9
... More
15mm dia CP Pillar cock long neck with aerator ( CON-CHR-021 KN)Jaquar make)
10
-
1624.1
... More
15mm dia CP flange
90
-
40.3
... More
15mm dia CP extension piece
90
-
59.3
... More
Angle cock self closing system for urinal(As per Cat No.PRS-CHR-077 of Jaquar)
6
-
2288.5
... More
125mm dia C.P.gratings.
40
-
82.7
... More
15mm C.P.revolving shower Jaquar make OHS-CHR-1989
8
-
1378.1
... More
15mm C.P. Shower Arm Jaquar make SHA-CHR-479L300
8
-
836.7
... More
25mm dia brass Fullway valve
20
-
926.1
... More
32mm dia brass Fullway valve
4
-
1355.6
... More
40mm dia brass Fullway valve
8
-
1722.1
... More
50mm dia brass Fullway valve
10
-
2551.3
... More
Grab Bar Left 90˚ Angle white(Cera)No.82210104
2
-
5487.6
... More
Grab Bar 692mm long white(Cera)No.82210106
4
-
2903.8
... More
Grab Bar Vertical swing white(Cera)No.82210107.
2
-
9109.9
... More
Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge. 10 litres PVC L.L. Cistern (Slimline-white)
33
-
1486.6
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge.100mm dia U-PVC SWR pipes(Supreme/Ashirvad)
455
-
453.8
... More
100mm dia U-PVC 'P' trap
45
-
497.3
... More
100mm dia U-PVC Door Tee
44
-
386
... More
100mm dia U-PVC Plain Bend
20
-
232
... More
100mm U-PVC Door Cross Tee
10
-
551.2
... More
75mm dia U-PVC Door Bend.
20
-
293.6
... More
75mm dia U-PVC Plain Bend.
22
-
184
... More
75mm dia Nahin trap
10
-
123.3
... More
75mm dia Multi Floor Trap
10
-
245.3
... More
110x75mm dia Reducer
10
-
83.8
... More
110mm dia Vent cowl.
32
-
58.2
... More
W/C connector
10
-
552.9
... More
PVC Clamp suitable for 75mm to 110mm dia pipe
100
-
42.8
... More
Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan / Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal all complete as per specification and direction of the Engineer in charge . Fixing 580mmx440mm size Orissa pan (Parryware/Hindware/Neycer/Rak)
4
-
2295.6
... More
Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge. E.W.C. with seat cover (Parryware/Hindware/Neycer/Rak)
24
-
3088.9
... More
One piece closwet(Hindware)No.92099(S-30)Berlin
5
-
18633.2
... More
Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make), etc all complete as per specification and direction of the Engineer in charge. 550mm x 400mm size W. H. Basin with Half Pedestal (Parryware/Hindware/Somany)
21
-
3902.9
... More
Under Counter basin(Hindware)No.10095.
10
-
3868.4
... More
Half pedestal Basin(Hindware)No.91049+91115
8
-
7717.1
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge.Fixing 600mmx450mm size B.E mirror (fixed type)
21
-
657.6
... More
Design mirror(Parryware)
8
-
1553.7
... More
Large size mirror with frame
3.6
-
1762.5
... More
Supplying all materials, labour, T&P and fixing bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification and direction of the Engineer in charge.390mmx375mmx590mm size Flat back large standing urinal(As per Cat No.60002 of Hindware.
6
-
4616.5
... More
15mm dia urinal spreader
6
-
286.6
... More
32mm dia C.P. dome waste
6
-
128.5
... More
Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge. Fixing of squatting urinal(Parryware/Hindware/ Somany)
2
-
2837.7
... More
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. 600 x 125mm plate glass shelf with CP guard rails
21
-
593.5
... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. 25mm x 600mm long CP towel rail
33
-
694.9
... More
CP towel rail Ring.
49
-
462.1
... More
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. CP soap holder
51
-
175
... More
Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with cast iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge. 600x450x250 mm Porceloain sink(Hindware/Neycer)
18
-
4930.4
... More
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 120 PSS UV of size 750x570x1350mm height with water storage capacity 120 liters along with 3 nos of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge.Aquagurd Pure Chill 120 PSS UV
3
-
101295
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per direction of the Engineer in charge.In Ground Floor
15.69
-
435
... More
Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In Ground Floor
5.22
-
4474.7
... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.In Ground Floor
2.63
-
6192.6
... More
In 1st Floor
5.71
-
6493.1
... More
In 2nd Floor
2.05
-
6838.6
... More
Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc.complete as per direction of the Engineer in charge. (Ceramic floor tiles of Kajaria / Somany / Johnson make of size 30cm x 30cm plain / printed series to be pre-approved by the Engineer in charge).In Ground Floor
52.29
-
908.3
... More
In 1st Floor
57.15
-
918.1
... More
In 2nd Floor
20.56
-
928.4
... More
Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles etc.complete as per direction of the Engineer in charge. (Ceramic wall tiles of Kajaria / Somany / Johnson make of size 30cmx20cm plain / printed series to be pre-approved by the Engineer in charge). In Ground Floor
199.75
-
886.4
... More
In First Floor
253.3
-
901.1
... More
In Second Floor
96.18
-
916.6
... More
Supplying all materials, labour, T&P and providing cement flush pointing to brick masonry (1:3) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In Ground Floor
199.75
-
143
... More
In First Floor
253.3
-
146.7
... More
In Second Floor
96.18
-
156.7
... More
Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. In Ground Floor
92.81
-
91.5
... More
In First Floor
115.76
-
91.5
... More
In Second Floor
41.22
-
91.5
... More
Supplying all materials, labour, T&P and wall painting 2 coat with plastic emulsion paint of approved shade on old work to give an even shade etc all complete as per specification and direction of the Engineer in charge.In Ground Floor
92.81
-
77.4
... More
In First Floor
115.76
-
77.4
... More
In Second Floor
41.22
-
77.4
... More
Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter with FRP frame of size 45x90mm.(Darwaja /Exon Door make). In ground floor to third floor
56.39
-
5440.3
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork with cement punning for skirting including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In First floor
137.48
-
162.3
... More
In Second floor
43.87
-
165.7
... More
Supplying the waterproofing material Pidifin 2K of Dr.fixit on equivalent water proofing material and appling in two coat over the concrete floor and dado upto 1"-6" in wall including cleaning,applying and mending as per specification including all labour charges as per direction of Engineer-in-charge. In First floor
137.48
-
248
... More
In Second floor
43.87
-
248
... More
Supplying all materials, labour, T&P and filling in sunken floor in toilets with cinter (light weight slag) well watered and rammed include conveyance of all materials to worksite payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.In First floor
36.65
-
555.75
... More
In Second floor
6.17
-
555.75
... More
Supplying all materials, labour, T&P and fixing granite tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge.In ground floor
4.5
-
2597.2
... More
In First floor
9.9
-
2612
... More
In Second floor
2.7
-
2627.4
... More
Supplying all materials, labour, T&P and fixing Kodappa tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge.In ground floor
5.4
-
1095.6
... More
In first floor
5.4
-
1126
... More
In second floor
2.7
-
1158
... More
Construction of RCC Over head Tank of Inside size- 6.40 X 3.70 X1.50m- In Third floor.(30 KLD). Supplying all materials, labour, T&P and providing cement concrete (1:1½:3)with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
19.88
-
7928.9
... More
Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage.
19.88
-
8311.3
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor. RCC floor roof, chajja etc
53.47
-
624.4
... More
RCC Beam, Column, wall etc
104.73
-
1153.1
... More
Supplying all materials, labour,T&P and providing 6mm thick cement plasster (1:4) over CC work including watering curring and conveyance of all materials to site.
62.56
-
167.3
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site.
62.56
-
34.2
... More
Supplying and fitting and fixing stainless steel 34 grade in said rail using 5mm dia 2mm thick circular pipe and lalustrade 32mmx32mmx2mm at the rate of mtr.Center to center and square pipe 32x32x2mm below including welding with stanless steel elect rod and fixing with necessary accessories etc.complete as per direction of the Engineer-in-charge.
80
-
323.7
... More
Providing fitting and fixing MS cover made out of MS angle and sheet duly welding and fixing with frame and hinges along with locking arrangement of size 60cmx60cm etc complete as per direction of Engineer-in-charge
60
-
69.9
... More
External PH Works:-Construction of 6.75mx3.60m x 1.40m(h) Rain water Recharge Pit- 2 Nos.Sinking of tube well 200mm dia- 0.0m to 30.00m
25
-
782.6
... More
Lowering of PVC casing pipe inside bore.200mm dia- 0.0m to 30.00m
25
-
180.5
... More
Cost.of 200mm dia (Sch.80)Pipe
25
-
1775.6
... More
Cutting slot in casing pipe for recharge of rain water
25
-
353.5
... More
2x25.0mx22/28{(0.40)²-(0.20)²}=4.70
2.35
-
110.1
... More
Cost of washed gravel.
2.35
-
1612.4
... More
Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.
66.69
-
204.2
... More
Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
1.08
-
4474.7
... More
Supplying all materials, labour, T&P and providing brick work with Fly ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:6) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
11.4
-
4833.4
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
91.2
-
151.3
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
48.6
-
31.9
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
3.13
-
428
... More
Supplying all materials, labour, T&P and providing reinforced cement concrete work of M-25 grade with 20mm and down grade black hard granite crusher broken stone chips including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
0.42
-
5439.9
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
0.34
-
8236.8
... More
Providing and filling filter media40mm size bolder-1x6.0x2.50x0.85=12.75
12.75
-
1414.5
... More
20mm size washed gravel-1x6.0x2.50x0.40=6.00
6
-
1723.5
... More
Course sand-1x6.0x2.50x0.30=4.50
4.5
-
582.5
... More
Providing fitting and fixing M.S.grill,Jalli cover over the harvesty pindi
3
-
6990
... More
Supplying all materials, labour, T&P and constructing surface drain of size A-4 type with cement concrete (1:3:6) using 12mm size h.g chips on bed, 1st class Fly ash brickwork in cement mortar (1:3) inside, 12mm thick cement plaster (1:3) finished smooth with cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
290
-
800
... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. 110mm dia u-pvc pipe alround concrete
80.45
-
1128.1
... More
160mm dia u-pvc pipe alround concrete
120
-
1863.9
... More
200mm dia u-pvc pipe alround concrete
30
-
2220.6
... More
Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge.Gully trap chamber of size 250mmx250mm with R.C.C cover slab
15
-
1458.1
... More
Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inspection chamber Inside size 760mmx760mmx460mm
12
-
8610.6
... More
Supplying all materials, labour, T&P and constructing circular type man hole chamber of the following size with cement concrete (1:4:8) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar (1:5), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, 12mm thick cement plaster (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Circular MH inside dia 1200mmx1670mm with sides sloped upto 560mm
4
-
15694.9
... More
Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Man hole chamber Inside size 910mmx910mmx910mm
8
-
16830.9
... More
Cost of R.C.P.C.Cover.
12
-
1093.1
... More
Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class Fly ash brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge .Brick masonry soakway pit 1.40m dia x 2.00m deep
1
-
20016.5
... More
Sinking of 150 mm dia tubewell through hand boring (water jet ) method (2nos).Supplying all materials, labour, T&P and setting up boring equipments including erection of suitable staging for installation of the required size of tube well, dismantling and removing the same after complection of the work, including transportation of the boring equipments, cleaning and levelling the site, excavation of mud pit, channels etc, levelling of site all complete as per direction of Engineer in charge
2
-
12294.5
... More
Supplying all labour, T&P and transporting the boring pipes, top casing , grouting pipes, P.V.C pipes and fittings, P.V.C well screens, cement, bentonite and gravels etc to the worksite including loading and unloading etc all complete as per direction of Engineer in charge
2
-
1320.57
... More
Supplying all labour, T&P and drilling pilot bore not less than 102mm dia, without casing pipes in all kinds of soils and rocks for the following depths excluding supply of necessary boring pipes including supply of necessary cutting equipments, extra sockets (whenever required) etc and withdrawing the boring pipes, washing and keeping the bore clear for logging if required all complete as per direction of Engineer in charge. Drilling pilot bore from 0 to 360 metres .
200
-
989
... More
Supplying all labour, T&P and reaming the pilot bore to the following sizes and depths without casing pipes including withdrawing the boring pipes, washing the bore by means of pipe cylinder etc all complete as per direction of Engineer in charge Reaming 100mm to 150mm dia from 0 to 360 metres
200
-
170.7
... More
Reaming 150mm to 200mm dia from 0 to 360 metres
200
-
202.5
... More
Reaming 200mm to 250mm dia from 0 to 360 metres
200
-
224.3
... More
Supplying all labour, T&P and jointing materials and lowering the 300mm dia top casing pipes into the position and removing the same after use all complete as per direction of Engineer in charge from 0 to 360 metres
2
-
1589.8
... More
Supplying all labour T&P and grouting with cement slurry for saline sealing in the bore around the 150 mm dia PVC casing pipe etc all complete as per the direction of the Engineer in charge.
2
-
5357.4
... More
Supplying all labour, T&P and jointing materials and lowering the pvc casing pipes, fittings and well screens in position, including fitting and fixing of centraliser, cutter plug and washing the bore all complete as per direction of Engineer in charge 200mm dia PVC casing pipe from 0 to 360 metres
200
-
117.5
... More
Cost of 150mm Dia casing Pipe
204
-
1251.4
... More
Cost of 150 mm dia PVC pipe Cutting slot 3 x 5m
30
-
350
... More
Cost of 150 mm dia C.I. cutter plug
2
-
350
... More
Supplying all labour, tools and plant and packing the bore with washed gravel (size P-6) around the pipes in good quality excluding cost of gravel etc all complete as per the direction of the Engineer-in-charge
2
-
1707.4
... More
Cost and Conveyance of Gravel
2
-
605.6
... More
Supplying all materials, labour, T&P and packing the bore with river sand over the gravel pack etc all complete as per the direction of the Engineer in charge
2
-
154.5
... More
Cost and Conveyance of sand
4
-
343.1
... More
Supplying all materials labour and T&P and grouting with cement slurry for sanitary sealing around the GI/PVC casing pipe up to 3 mtrs. Below ground level including cost of cement all complete as per the direction of Engineer-in-Charge
2
-
1295.1
... More
Add cost of cement
4
-
548.77
... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge By Compressor
2
-
2378.1
... More
Construction of 50000 Liters RCC Under ground Reserver of Inside size-7.5 x 4.0 x2.10m Earth work in excavation of foundation in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.
67.86
-
204.2
... More
-do- with Ist disintegrated rockadditional depth of 1.50 m over the initial lead and lift
63.34
-
219.2
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
11.18
-
435
... More
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
7.45
-
4847.3
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1½:3)with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
30.32
-
6885.6
... More
Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage.
30.32
-
8236.8
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor.RCC floor roof, chajja etc
29.1
-
428
... More
RCC Beam, Column, wall etc
117.48
-
732.4
... More
RCC Plinth bend/ Raft
20.32
-
262.7
... More
Supplying all materials, labour,T&P and providing 6mm thick cement plasster (1:4) over CC work including watering curring and conveyance of all materials to site.
82.6
-
155.3
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site.
82.6
-
31.9
... More
Supplying and fitting and fixing stainless steel 34 grade in said rail using 5mm dia 2mm thick circular pipe and lalustrade 32mmx32mmx2mm at the rate of mtr.Center to center and square pipe 32x32x2mm below including welding with stanless steel elect rod and fixing with necessary accessories etc.complete as per direction of the Engineer-in-charge.
80
-
323.7
... More
Providing fitting and fixing RCPC cover etc complete as per direction of Engineer-in-charge(18" round man hole cover)
2
-
1093.1
... More
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge.For Sump. 1 H.P three phase 15 stage head range 20 to 35 metres, discharge 145 to 110 L.M.P with outlet dia of 25mm (Horizontal)
2
-
13775.6
... More
DOL Control panel
2
-
3805.5
... More
2.50sqmm flat cable
100
-
128.1
... More
For Production well- 2 H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.P.M with outlet dia of 32mm
2
-
16625.6
... More
DOL controll pannel
2
-
3805.5
... More
2.50sqmm cable
150
-
128.1
... More
32mm dia steel short piece
2
-
152.3
... More
Steel rope with cover
75
-
26.7
... More
Well cap
1
-
152.3
... More
50mm size CI bracket
2
-
91.3
... More
20mm dia rigid UPVC pipes
80
-
6.9
... More
Supplying all materials, labour, T&P and constructing Bore well protection chamber of the inside size 650x650x1000hight with cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ash brickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:4) inside and outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.
2
-
10296
... More
EXTERNAL WORKS:- Construction 1 nos 100 users RCC Septic tank-1 No. Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.
59.4
-
204.2
... More
-do- with Ist disintegrated rockadditional depth of 1.50 m over the initial lead and lift
37.62
-
219.2
... More
Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge
5.94
-
435
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
5.94
-
4474.7
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
3.47
-
6192.6
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
27.87
-
6885.6
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.For Roof slab
37.15
-
428
... More
For RCC wall
128.4
-
732.4
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.In ground floor
22.3
-
8236.8
... More
Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
110.52
-
187.2
... More
Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge
2
-
362.8
... More
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
10
-
247.1
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
10.8
-
113.5
... More
Construction of 50 users RCC septic tank-1 Nos :- Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.
27.95
-
204.2
... More
Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.
5.59
-
219.2
... More
Supplying all materials, labour, T&P and providing shoring and shuttering foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per direction of the Engineer in charge.
32.8
-
235.2
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
3.08
-
435
... More
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In ground floor (inside/outside)
3.08
-
4847.3
... More
Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.In ground floor (inside/outside)
15.84
-
155.3
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.In ground floor (inside/outside)
15.84
-
31.9
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.R.C.C floor and roof slabs up to 4.30m height
10.34
-
428
... More
R.C.C beams,columns,girder and bressmer etc.
73.5
-
732.4
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.In ground floor
9.41
-
8236.8
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
11.76
-
6885.6
... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
0.8
-
6192.6
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
5.28
-
187.2
... More
Supplying all materials, labour, T&P and providing brick work with Fly ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
0.6
-
4847.8
... More
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
6
-
247.1
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
5.69
-
113.5
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements