Works Department Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Works Department - EICCL Tender
Civil And Construction
Bridge Construction
Eprocure
Opening Date10 Mar 2025
Closing Date24 Mar 2025
Tender Amount₹ 5,68,69,709
AI Insights
Technical
Technical
Additional Eligibility
Class Of Bidder
... View More
The class eligibility requirement to bid or participate in this tender varies depending on the specific work, with requirements including 'A' Class, 'B' & 'A' Class, 'A' & Special Class, and 'A' Class for different works. However, a general class eligibility requirement that applies to all bidders is not explicitly stated.
Technical Capacity
... View More
The required prior work experience for the bidder involves satisfactorily executing two or three similar works, each costing 60 lakhs or more, aggregating to 200 lakhs or more, or executing one similar work costing 200 lakhs or more in any one financial year during the current or last five years. The similar work refers to the construction of Minor Bridge executed under one agreement for any authority bodies of State Govt. / Central Govt./ Reputed Private Organization or Companies. The value of similar works is specified as 60 lakhs or more for each work and an aggregate of 200 lakhs or more, or a single work costing 200 lakhs or more. No specific percentage of similar works completed is mentioned. However, the bidder needs to furnish a certificate from the concerned officer, and in case of execution of work in Private Organization / Companies, the Certificate from the concerned competent authority supported with Income Tax return against the payment received for the same is required. The bidder should have completed civil engineering works in the last 5 years, with the updated value of these works calculated using an escalation factor. The bidder is also required to submit information on their existing commitments and ongoing works, including the value of the contract, the stipulated period of completion, and the value of works remaining to be completed. The bidder needs to provide information on the value of civil engineering works executed, which can be used to assess their experience and capability. The bidder is required to provide information on the total value of Civil Engineering construction work performed in the last five years, for which a certificate from a Chartered Accountant is to be furnished. The bidder should also provide details of existing commitments and ongoing works, including the value of existing commitments and the stipulated period of completion remaining for each work. The bidder needs to provide information on the value of similar works completed, with a specific format to be followed. The bidder is also required to provide information on the percentage of similar works completed, with the option to quote percentage excess or less over the estimated cost in the Price Bid. The bidder can quote percentage excess/less up to two decimal point only. The values mentioned include 60 lakhs or more for each similar work, and 200 lakhs or more in aggregate, or 200 lakh or more for a single similar work. The escalation factors for each of the last 5 years are also provided, ranging from 1.10 to 1.61. The bidder needs to provide a certificate from the concerned officer, and the bidder is required to sign above their full type-written name and current address. The bidder needs to provide information on the list of plants and equipment to be deployed on the contract work, with a minimum requirement of specific equipment and the authority of ownership or long-term lease extended beyond the duration of the work. The bidder needs to provide a proper Tax Invoice for steel shuttering materials not older than 5 years from the last date of bidding. The bidder is required to provide information on the equipment mentioned, which must be included in Schedule “C” and clearly indicated as “Owned/leased.” The bidder needs to provide information on the additional machinery/equipment required for the satisfactory completion of the work, and the arrangement for deploying such machinery/equipment. The bidder is also required to provide a certificate to be issued by the Executive Engineer under whom the machineries/equipments are deployed, which should not be issued prior to 90 days of receipt. The bidder should submit an affidavit stating that they have not abandoned any road, bridge, irrigation, building, or other project work in India, and that no contract awarded to them for such works has been rescinded during the last 5 years prior to the date of the bid. The value of civil engineering works executed by the bidder during the last 5 years should be provided, along with the updated value considering the escalation factor. The maximum updated value of civil engineering works executed during one of the last 5 years should also be certified by a chartered accountant.
Costs
EMD
₹ 5,68,700Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_EICCL_111478_1Tender No
CCE.Ctc.(RandB)15/2024-25Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Filling foundation and plinth with good quality river sand including dressing levelling with cost conveyance taxes cost of all materials and labour eetc complete as per specification and direction of Engineer in charge
463.83
1048
486093.84
... More
Construction of granular sub-base by providing close graded Granular sub-base Grading-IV materials including all cost of materials with cost of all labour, T&P etc. as per table 400-2, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MORT&H Specification for Road & Bridge works ( 5th Revision).
186.88
3436
642129.02
... More
Construction of granular sub-base by providing close graded Granular sub-base Grading-VI materials including all cost of materials with cost of all labour, T&P etc. as per table 400-2, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MORT&H Specification for Road & Bridge works ( 5th Revision).
160.13
3287
526374.53
... More
Providing, laying, spreading and compacting graded stone aggregate to Wet mix macadam specificationincluding all cost, conveyance of materials with cost of all labour, T&P etc. including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per clause 406 of MORT&H specification for Road and Bridge works(5th Revision).
115
3286
377956.7
... More
Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of road surfce and spraying primer @ 0.6kg. per sqm.using mechanical broom as per Clause 502 of MORT&H Specification for Road & Bridge works (5th Revision.)
460
36
16656.6
... More
Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor @ 0.2kg. per sqm.on prepared bituminous/granular surface cleaned with mechanical broom as per Clause 503 of MORT&H Specification for Road & Bridge works (5th Revision.)
460
12
5961.6
... More
Providing & laying 50 mm thick av. compacted Bituminous Macadam (Grading-II) using VG-30 Bitumen with Hot Mix Plant 100-120 TPH using crusher broken hard granite aggregates of specified grading premixed with bituminous binder @ 3.3 % by weight of total mix and filler, transporting the hot mix to works site, lying with Hydrostatic Paver Finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled vibratory and tandem rollers to achieve the desired compacting as per Clause No. 504 and section 900 of specifications for Road and Bridge works of Ministry of Road Transport & Highways (5thRevision) &including cost of all materials, labour, T&P,taxes, royalty etc complete in all respect and as per direction of the Engineer-in-charge.
230
8812
2026957.8
... More
Providing and laying 25 mm thick av. compacted Semi Dense Bituminous Concrete (Grading-II) using VG-30 grade Bitumen and crusher broken hard granite aggregates of specified grading, premixed with bituminous binder @ 5.0 per cent of mix and filler, transporting the hot mix 100-120 TPH to work site, laying with a hydrostatic paverfinisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per clause No.501, 508 and section 900 of specifications for Road and Bridge works of Ministry of Road Transport & Highways (5th Revision) & including cost of all materials, labour, T&P, taxes, royalty etc complete in all respect and as per direction of the Engineer-in-charge.
11.5
10877
125094.82
... More
Providing granular subbase with moorum in shoulder not exceeding 150mm thick watering and compacting to the required density at OMC with PRR including cost, conveyance, royalty and taxes of materials, labour with T&P required for the work etc. complete as per specification & direction ofthe Engineer-in-charge
10
3517
35175.2
... More
PCC M-15 Grade in Foundation Bed using 40mm and down grade size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts including frame works including cost, conveyance of all materials, cost of all labour, T&P, cost of all materials etc. complete as per direction and specification of Engineer-in-charge
110.52
6784
749791.99
... More
PCC M-20 Grade in Substructure of CD work using 40mm and down grade size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts including frame works including cost, conveyance of all materials, cost of all labour, T&P, cost of all materials etc. complete as per direction and specification of Engineer-in-charge
566.5
7514
4256952.92
... More
Bored cast in situ M-35 grade RCC pile 1000mm dia excluding reinforcement complete as per Drawing and Technical Specification and removal of excavated earth with all lifts and lead upto 1000m etc. complete
960
8105
7781040
... More
Supplying, fitting fixing and placing in position Steel Liner of 6mm to 10mm thick for curbs and staining of wells as per approved Drawing and Technical Specificaion and Section 1200 of MORTH Specification for Road & Bridge (5th Revision)
52.3
109512
5727503.75
... More
RCC M-35 Grade using 20mm and down grade size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts including frame works including cost, conveyance of all materials, cost of all labour, T&P, cost of all materials etc. complete as per direction and specification of Engineer-in-charge Foundation Raft
507.6
8229
4177045.48
... More
RCC M-25 Grade using 20mm and down grade size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts including frame works including cost, conveyance of all materials, cost of all labour, T&P, cost of all materials etc. complete as per direction and specification of Engineer-in-charge
17.1
7769
132854.35
... More
RCC M-30 Grade in substructure using 20mm downgraded size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts including form works etc. complete as per the specification and direction of the Engineer-in- charge Abutment and Pier shaft
206.49
9851
2034250.69
... More
Tie Beam
3.08
19134
58935.31
... More
Return wall and Wing wall
4.68
11603
54303.68
... More
Wearing Coat
23.58
13967
329346.81
... More
Superstructure
192.11
22180
4261166.94
... More
Providing Fe-500 HYSD reinforcement (SAIL/ RINL/TATA/JINDAL STEEL/ SHYAM STEEL) for RCC works including bending, binding & placing in position as per specification of Drawing & design including cost, conveyance of all materials, all labour and T&P etc. complete as per the specification and direction of the Engineer-in-charge.
2019.67
8765
17702912.47
... More
Providing weep holes in Plain/ reinforced concrete abutment, wing wall/ return wall with 100mm dia A.C.Pipe, extending through the full width of the structure with slope of 1V:20H Complete as per drawing and Technical specifications etc. complete with cost, conveyance, taxes, royalties of all materials, cost of all labour,T&P, sundries etc. complete as per specification and direction of the Engineer-in-charge
290.9
94
27347.51
... More
Providing and laying of metal spall backing in the rear side of abutment and wing wall using 5cm sizie hard granite metal to a thickness not less than 600mm with smaller size towards the soil and bigger size towards the wall and provided the entire surface etc complete as per specification and direction of Engineer in charge
46.51
2937
136623.59
... More
Gravel backing to approns and revetment including cost, conveyance, royalty, taxes of materials, labour, T&P required for the work etc. complete as per direction of the Engineer-in-charge
107.25
2943
315664.64
... More
Rough stone dry packing in aprons and revetments, stone pitching in slopes and boulder apron etc with hard stone of size 30 cm and above and weighing not less than 40Kg inclulding all cost,conveyanceof materials with cost of all labour T&P etc. as per approved drawing and Section 900, 1000 & 2500 of specifications for road and bridge works of Ministry of Road Transport & Highways (5th Revision) & including cost of all materials, labour, T&P, taxes, royalty etc complete in all respect and as per direction of the Engineer-in-charge
355.5
2871
1020732.93
... More
Supplying, fabricating welded water tight drainage spout as per technical specification clause 2705 of specification road and bridge work MORT&H (5th revision) assembly to dimensions shown on drawing of dia not less than 100mm with galvanized steel conforming to IS 226 & fixing in position with suitable fixtures at specified locations on bridge decks including painting two coats with bituminous paint sealed with sealant as per IS 1834 around the spout to the deck slab including full compensation to all operations, all inclusive costs, contingencies, incidental involved for the finished defect free item of work complete as per the specification & direction of the Engineer in charge.
12
1415
16990.8
... More
Reinforced cement concrete crash barrier at the edges of the bridge structures, constructed with M-40 grade concrete with HYSD reinforcement conforming to IRC:21 and dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design given in the enclosure to MOST circular No. RW/NH - 33022/1/94-DO III dated 24 June 1994 as per dimensions in the approved drawing and at locations directed by the Engineer and as per Technical Specifications section 809 of MORTH specification for Road & Bridge works (5th revision) etc. complete as directed by the Engineer in charge
24
4782
114780.48
... More
Providing and erecting a "W" metal beam crash barrier comprising of 3mm thick corrugated sheet metal beam rail, 70 cm above road/ ground level, fixed on ISMC series cnanel vertical post, 150x75x5mm spaced 2m centre to centre, 1.8m high, 1.1m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150x75x5mm, 330mm long complete as per clause 810 of MORT&H specifications for Road & Bridge works(5th Revision)
180
5256
946125
... More
Providing, laying and fixing in position reinforced cement concrete 1000mm dia NP4 hume pipes for culverts on first class bedding of granular materials including pointing ends fixing collars with cement mortar 1:3 for finished item of work as per Section 1000 & 2900 of specifications for road and bridge works of Ministry of Road Transport & Highways (5th Revision) & including cost of all materials, labour, T&P, taxes, royalty etc complete in all respect and as per direction of the Engineer-in-charge
22.5
8017
180389.7
... More
Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site by mechanical means within a lead of 5 km. spreading, grading to required slope and compacting to meet requirement of table 300-2 & Clause 305 of MORT&H specifications for Road & Bridge works(5th Revision).
4135
203
842175.45
... More
Painting two coats with approved Synthetic enamel paints of approved colour/ shade including sand papering, polishing the surface, cost, conveyances, taxes of all materials, labour with T&P required for thework etc complete as per specification and direction of the Engineer in charge
81.31
81
6651.97
... More
Supplying and fixing 15 cm diameter 1.00m long guard posts of RCC(1:2:4) using 7.5 kg of steel for each guard post with 12 mm size black hard granite stone chips including cost of all reinforcemnt and materials centering shuttering and watering etc complete as per drawing and direction of the Engineer in Charge
120
434
52160.4
... More
Labour for driving sal bullah of 3.50m length 12cm to 15cm dia piles and fixing in position 1.50m depth including sharpening the end 12cm etc complete
854
202
173105.8
... More
Fitting fixing of bamboo Jafree on top of pile with cost conveyance taxes cost of all materials and labour eetc complete as per specification and direction of Engineer in charge
72
19
1410.48
... More
Labour for filling empty cement bags sewing and laying in position with cost of empty cement bag sand etc complete as per specification and direction of Engineer in charge.
21439
33
709630.9
... More
Dismantling of Pretressed / Reinforced Cement Concrete Grade M-20 and above including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material with all lifts and lead of 1000 meters etc. complete as per specification and direction of Engineer in charge
300.56
1757
528357.43
... More
Dismantling of Cement Concrete Grade M-15 and M-20 including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material with all lifts and lead of 1000 meters etc. complete as per specification and direction of Engineer in charge
70.4
638
44917.31
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%