Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 2,23,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_EICCL_66588_2Bid Award Id
ViewTender No
SE(R and B) BGR-10-2020-21Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
First class Fly ash Brick masonry using bricks of size 23cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge.
65.89
-
4027.6
... More
First class Fly ash Brick masonry using bricks of size 23cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super stracture including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge.
-
-
-
... More
Ground Floor
204.96
-
4066
... More
First Floor
40.07
-
4325.6
... More
R.C.C. work of M-20 in following works using 12 mm. to 20 mm. (½” to ¾”) size (20 mm. not to exceed 25%) hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per the direction of the Engineer-in-charge.
-
-
-
... More
FOUNDATION & FOOTING
64.08
-
4482.7
... More
COLUMN SUPERSTRUCTURE
-
-
-
... More
Ground Floor
29.04
-
10131.5
... More
First Floor
5.29
-
11373.4
... More
PLINTH BEAM
18.7
-
4835.6
... More
LINTEL
-
-
-
... More
Ground Floor
5.93
-
7995.4
... More
First Floor
2.82
-
8810.1
... More
CHAJJA
-
-
-
... More
First Floor
3.76
-
850.2
... More
BEAM
-
-
-
... More
Ground Floor
6.96
-
10131.5
... More
First Floor
7.66
-
11373.4
... More
ROOF SLAB
-
-
-
... More
Ground Floor
44.83
-
7745.7
... More
First Floor
22.16
-
8510.5
... More
Drain
-
-
-
... More
Bottom slab
72
-
4383.59
... More
Side Wall
144
-
5374.47
... More
Approach Road
148.38
-
4331.5
... More
Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.
-
-
-
... More
Ground Floor
337.61
-
8272.4
... More
First Floor
43.26
-
8297
... More
Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Ground Floor
880.23
-
192.9
... More
First Floor
560.3
-
197.7
... More
Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Ground Floor
1816.41
-
135.2
... More
First Floor
855.6
-
140.6
... More
Supplying, fitting and fixing vetrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm plain Ivory ( Somany,Kajaria, Johnson) of approved make in floors on 20mm thick bed of C.M. (1:4) (1cement:4course sand) and filling the joint with white cement mixed with pigment to match the shades of the tileincluding cost of all materials, taxes, labour, labour cess, T&P etc. required for the work complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Ground Floor
443.52
-
946.8
... More
First Floor
164.72
-
956.4
... More
Providing, fitting, fixing vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm plain Ivory ( Somany, Kajaria, Johnson) of approved make as directed by Engineer-in-charge in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials all labour,labour cess complete in all respects.
-
-
-
... More
Ground Floor
70.93
-
1044.7
... More
First Floor
9.89
-
1059.1
... More
Providing and fixing 16 mm thick Granite stone in floor and Skirting (sample of sample of stone should be approved by EIC) for any similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge etc. laid over 25mm thick bed of cement mortar 1:1 (1 cement: 1 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-In-charge. In all floors and all heights.
5.11
-
1694.8
... More
Dressed seasoned sal wood work framed and fixed in frames of doors & windows including cost,conveyance of all materials and cost of labour for fitting, fixing etc.complete as per the instruction of Engineer-in-Charge .
0.54
-
49473
... More
32mm piasal wood or local Teak wood panelled shutters moulded panels with all labour, iron fittings, and wooden hinged cleats etc fitted and fixed complete in all respect
18.21
-
3649.2
... More
Supplying Fitting, fixing up fully glazed aluminium framed window (sliding type) made up aluminium section 9778 as window frame, section 4095, 4096 and 9777, 3994 as shutter frame with 5mm black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of all materials, all taxes, labour, T&P excluding cost of glass etc.
-
-
-
... More
Ground Floor
193.15
-
602.1
... More
First Floor
200.81
-
602.1
... More
Supply of 6mm thick plain glass (ISI) as panel at work site including conveyance & handling charges in Aluminium frame to be utilised for the work as mentioned above as per direction of Engineer in charge.
-
-
-
... More
Ground Floor
55.18
-
674.04
... More
First Floor
41
-
674.04
... More
Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar/ flat including stair case hand railing with 40mm. dia G.I.pipe etc. including painting two coats over a coat of redoxide primer as per approved drawing and design with cost of all materials & labour, taxes, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge.
3965.77
-
64.7
... More
Supplying, fitting & fixing of Chequered tiles in floors of approved make laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with epoxy gouut of of approved quality including cost of all materials, labour T&P etc
563.86
-
481.3
... More
Painting two coats with approved antifungal weather seal paints (ISI) of approved colour, shade on wall surface over a coat of wall primer(ISI) water bound including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour,labour cess with T&P etc, complete as per specification & direction of Engineer-in-charge.
-
-
-
... More
Ground Floor
1641.89
-
128.8
... More
First Floor
998.24
-
133.8
... More
Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, taxes of all materials, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.
-
-
-
... More
Ground Floor
3016.34
-
71.4
... More
First Floor
1968.57
-
72.7
... More
Wall Painting two coats with approved Plastic Emulsion Paint over a coat of Water Bound Wall cement Primer on Plastered Surface in
-
-
-
... More
Ground Floor
3016.34
-
134.5
... More
First Floor
1968.57
-
137.5
... More
Painting two coats to new Iron work with approved enamel paints of approved colour, shade over a coat of primer including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.
-
-
-
... More
Ground Floor
409.14
-
186.4
... More
First Floor
771.12
-
191.2
... More
Providing fitting and fixing up partition walling OEL aluminium anodised section No-9210 and 9207 as single groove and double groove respectively as horizontal and vertical member and OEL section 4660 as tapered clip for fixing up 12 mm thick prelaminated board and jointing angle No-1855 etc Data for 6'-10" x 7'-6" = 51.22sft or 4.76 sqm=24.39 Kg.
1199.52
-
479.6
... More
Supply of 12 mm thick prelaminated board (nova pan Make) as panel at work site including conveyance & handling charges in Aluminium frame to be utilised for the work as mentioned above as per direction of Engineer in charge.
343.5
-
589.79
... More
Providing, fitting and fixing of Al door with anodized Al. door section of 9202 as vertical member, 9201 as top and 9200 as middle and bottom member with frame section No.9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle no. 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges , etc. complete as per direction of the Engineer-in-charge
150.82
-
413.6
... More
Supply of 6mm thick reflective black glass (ISI) to panel at work site including conveyance & handling charges in Aluminium frame to be utilised for the work as mentioned above as per direction of Engineer in charge.
4.32
-
674.04
... More
Supply of 12mm thick Plain glass (ISI) to panel at work site including conveyance & handling charges in Aluminium frame to be utilised for the work as mentioned above as per direction of Engineer in charge.
1.79
-
1183.83
... More
Providing fitting fixing of false ceiling with Aluminium anodised T section No.3215 with 2'0" center to center, L section No.1705 on 4 walls to be fixed by means of steel screw and P.V.C. plug and the Aluminium grid 2'0"x2'0" with water proof Gypsum board suspended from ceiling including cost of all materials, labour T&P etc required for the work all complete
131.55
-
931.2
... More
Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties and taxes of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Ground Floor
406.72
-
278.9
... More
First Floor
1119.75
-
306.2
... More
Supplying and fixing Colour G.C.I sheeet on roof drilling hole in wind ties including fixing of ridges valley wind ties etc excluding cost of fittings.
55.74
-
413.73
... More
Supplying and fixing of pre cast inter locking concrete block 80mm thick with crushing strength as per drawing and technical specification clause 1504 of MORTH and specification 6919-11-1986 with all cost of materials, labour, carriage etc complete
557.41
-
747
... More
Construction of embankment with approved materials obtained from borrow pits with all lifts and leads transportating to site within a lead of 5km and spreading grading to required slope and compacting to meet reqirement of table 300-2 and Clause-305 of MoRT&H specifications for Road & Bridge Works (4th Revision).(AR-P-157/35)
17012.81
-
138.95
... More
Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m
2164.41
-
42.28
... More
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.
32760
-
5.45
... More
Dismantling brick or stone masonry in lime or cement mortar under 3mtr height including stacking the useful materials for reuse and removing the debris within 50m lead. Per 1 cum
-
-
-
... More
Ground Floor
105.28
-
1074.5
... More
First Floor
15.86
-
1137.7
... More
Dismantling and removing R.C.C. columns, beams, slab, staircase, landing and lintels including stacking the useful materials for reuse and removing the debris within 50m lead. Per 1 cum
-
-
-
... More
Ground Floor
7.72
-
1142.9
... More
First Floor
2.83
-
1164.9
... More
Dismantling and removing R.C.C. chajja, shelves, fins, and parapet including stacking the useful materials for reuse and removing the debris within 50m lead.Per 1 sqm
-
-
-
... More
Ground Floor
11.61
-
134.6
... More
First Floor
3.9
-
141.4
... More
Removing old lime or cement plaster from walls including racking out joints 12mm deep and removing the debris within 50m lead
-
-
-
... More
Ground Floor
46.45
-
38.5
... More
First Floor
46.45
-
40.4
... More
Dismantling and removing old tiled flooring including stacking the useful materials for reuse and removing the debris within 50m lead.Per 1 sqm
60.97
-
96.2
... More
Dismantling and removing 2.5 cm thick grading concrete from roof slab cleaning the surface lowering and removing the debris within 50m lead. Per 1 sqm.
320.68
-
86.6
... More
EI FOR THE WORK:- Recessed wiring to Light/ Fan/ Call bell and Exhaust fan point with 1.5 mm2 F.R. PVC insulated single core multi strand copper conductor of ISI marked with 50mm dia Non metallic with 20mm dia non metalic PVC flexible conduit with 5/6 250volt Modular type switch,ceilling rose mounted on MS box having front bakelite cover of suitable size M.S box with 1.5mm2 FR pvc insuleted S/C multistand copper conductor as earth wire Including all accessories and connection.as per direction of ingineer-in-charge. (Make of wire Finolex/Anchore/ Havels/HPL/L&T/ V.Guard.
-
-
-
... More
a)Group-A
48
-
482
... More
b) Group-B
45
-
642
... More
c) Group-C
31
-
839
... More
Recessed wiring to 5/6A socket outlet with 2x1mm2 PVC Insulatted S.C F.R multistand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit pipe with Modular type switch.
-
-
-
... More
a) Group-A
48
-
601
... More
b) on existing board
22
-
143
... More
Recessed wiring to power plug point with 2x4mm2 PVC Insulatted S.C F.R multistand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit along with 1x2.5mm2 F.R PVC insulated S.C C.U. wire for loop earthing as required.(Make of wire finolex/Anchore/Havels /HPL/V.Guard )
22
-
733
... More
Wiring to Circuit/ Sub-main along with earth wire with following size of FR PVC S.C.Cu. Wire (Make of wire Finolex/ Anchor/ Havels/HPL/L&T/ V.Guard.
-
-
-
... More
1x1.5mm2 Sub-Main Wiring for Invertor connectiom.
318
-
34
... More
a) (1.8.1) 2X1.5mm2 + 1x1.5mm2
296
-
120
... More
b) (1.8.2) 2X2.5mm2 + 1x1.5mm2
531
-
134
... More
c) (1.8.3) 2X4mm2 + 1x1.5mm2
246
-
151
... More
e) (1.8.4) 2X6mm2 + 1x2.5mm2
166
-
183
... More
S/F of step type electronic fan regulator of havells/legrand/equivalent make
87
-
419
... More
S/F of 1200mm Ac ceilling Fan of model usha Allure plus (ivory/White colour)/ bajaj Regal gold NXG (ivory/white)/Havells festiva/equs(white/titanium)/equivalent make of mentioned brand w/o Regulator as per direction of engineer in charge
30
-
2599
... More
S/F of Ultra modern surface mounted Decorative oval Bulk head edge LED Luminaire complete with 10watt LED lamp. (Make Hvells/Endura Rugby model)
4
-
1707
... More
S/F of ModularAngle Holder.
73
-
67
... More
S/F of 10wt LED Bulb of Havels/HPL/Bajaj make.
67
-
157
... More
S/F of 18wt LED Tubelight of Havels/HPL/Bajaj make.
255
-
284
... More
S/F of 300mm Exhaust Fan of model Usha turbo jet /Bajaj freshee with louvers i.e safe guard .
13
-
1632
... More
S/F of computer Board consisting of 3 Nos of Modular plug and switch all accessories including recessed wiring,Cutting of wall & connection as per requirement.
16
-
1146
... More
S/F of 12watt Surface mounted LED down light complete of Havells/Bajaj/HPL make.
21
-
1335
... More
S/F of (4+12) way double door TPN distribution Box for single phase out going incoming- 63Amp TPN MCB of havells make, outgoing- 12 x (6-32)A SP MCB as per direction of engineer in charge( DB & MCB of make Schnider/Hager/Legrand/L&T)
6
-
8914
... More
S/F of 12 module modular base and cover plate of make havells/HPL/legrand/equivalent
62
-
415
... More
S/F of 8module modular base and cover plate of make havells/HPL/legrand/ equivalent
31
-
325
... More
S/F of 3 module modular base and cover plate of make havells/HPL/legrand/ equivalent
156
-
151
... More
S/F of 3 pin 5/6A modular Socket of make havells/HPL/legrand
142
-
124
... More
S/F of 5/6A modular switch of make havells/HPL/legrand
447
-
59
... More
S/F of 15/16A modular socket of make havells/HPL/legrand
28
-
187
... More
S/F of 15/16A modular switch of make havells/HPL/legrand
28
-
130
... More
S/F. of 12 Way double door D.Box with 1x 32Amp DP of 'C' series + 10 x(16 -10)A.SP MCB'B' as per direction of engineer in charge( DB & MCB of make Schnider/Hager/Legrand/L&T)
9
-
3604
... More
S/F 3 1/2 x 50 mm2 PVC Al Armoured Cable Of ISI Marked (Polycab/Nicco/Havels)
76
-
329
... More
S/F 4 x 16 mm2 PVC Al Armoured Cable Of ISI Marked (Polycab/Nicco/Havels)
196
-
169
... More
Laying of Cable in Trenching in all type of soil with excavation of earth, Tile cutting with sand cushing and brick laying etc.& filling of loose soil upto ground level.
32
-
122
... More
Laying of cable on wall surface by clamping.
156
-
56
... More
Fabrication of 250A panel board of size 1200mmx 1260mm x 320mm with powder coat made out of 18 SWG CR sheet with Incoming: 250Amp MCCB four pole 35KA breaking capacity -1No,400A, 25mm x 12mm copper Busbar-1no, Outgoing: 100Amp MCCB four pole 16KA breaking capacity -1No, 63Amp MCCB four pole 16KA breaking capacity -6No,250Amp four pole Onload Change over -1No,Volt meter,Ammeter CT coil,RYB indicator,Transporation and fixing charges etc. (Main Incomer Panel Board) Protecective device(MCCB,Changeover switch) should have make of (L&T/Hager/Schnider/legrand)
1
-
91139
... More
S/F of Standard Earthing with G.I. earth pipe of 3mtr.Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required.
8
-
2145
... More
S/F of Special Earthing complete with provision of 600x600x3.15mm thick copper plate along with 25x5mm copper strip in 40mm dia GI pipe including soldering of strip if necessary and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required.
1
-
12531
... More
S/F of 90wt LED Street light of Havels/HPL/Bajaj make.
4
-
9593
... More
S/F of 70wt LED Street light of Havels/HPL/Bajaj make.
12
-
7415
... More
Supply and Fixing of GI bend pipe for street light including all accessories i.e clamp or jam lock etc
16
-
650
... More
Provision of Lightening arrestor with 85mm dia 3mm thick Copper base plate and Copper flat 20mm width x 3mm thick including all accessories.
1
-
5050
... More
S/F of 4kg ABC Dry power (S/P) Type Fire Extinguisher pressurized with dry Nitrozen gas at 15 bar.as per IS 15683 with fire rating 2A,21B,at 35 bar,operating temperature-30 C to + 55 C,supplied with standard accessories of ISI marked as per direction of engineer in charge.
4
-
2725
... More
S/F of 1650 VA UPS( Microtake/Luminous) with 1nos 150 AH Sine Wave inverter battery ( make Exide/Amaron/Luminous or equivalent)
2
-
25166
... More
S/F of 12watt Ceiling LED down light complete of Havells/Bajaj/HPL make.
18
-
935
... More
Cost for repair & dressing of existing wiring system Sub-Total-Rs
1
-
17500
... More
S/F of Copper 3 Star Rated (With EER 3.5) 1.5 Ton Split type AC.Machine make of Carrier (Octra-X)/Voltas (185ZYJ)
3
-
45362
... More
Installation charges of 1.5 ton AC.machine.
3
-
1456
... More
S/F of 4KVA Voltage stabiliser having digital display ,intial time delay system i.e certified with ISO 9001:2008 with working range of (90-300)V of make V.guard/Autotake
3
-
8348
... More
S/F of Extra long copper pipe for indoor unit to out door unit.( As per Outdoor Unit Location)
12
-
486
... More
S/F 25A/32A AC Starter modular switch complete with all accessories of Havells/Equivalent make.
3
-
575
... More
Supply,Transportation, Erection,Testing & Commissioning of 10Mtr. Long Hot Dip Galvanized Octagonal pole for Mini High Mast Light made up of High tensile steel and high purity zinc suitable to withstand the wind speed of 180 Km/Hr as per IS 875,with Foundation Base plate of dimension (L-250xB-250mmxT-16mm),Pole dimension as Top dia-70mm,Bottom Dia-155mm,sheet thickness-3mm,Foot rest and provision to hold 4 Nos of 150watt LED Flood light fittings.Foundation bolt of size-M20xlength 750 mm with hot dip galvanized.(Make of Pole-Bajaj/Utkarsh/Electro).
3
-
36010
... More
Supply,Installation,Testing & Commissioning of 150 watt LED Flood Light Luminaire with efficiency 120 Lumens/watt and indivisual LED with secondary optics made in high pressure die-cast housing with toughned glass and heat sink in Aluminium extrusion with IP 66 protection complete of Havels/HPL/Bajaj make.
12
-
15037
... More
Supply & Fixing of Galvanized Decorative Four Arm Bracket with all accessories suitable for fixing of 4 Nos LED Street Light Fitting.
1
-
12951
... More
Supply & Fixing of Loop in Loop out Junction box with all materials (SP MCB 6Amp-1No of L&T/Legrand/Havells make,4way bakelite connector-1No,bakelite board-1No,1.5mm2 pvc insulated single core multistrand copper wire of Finolex/Anchor/Havells make-15mtr,16A DP Switch-1No of any ISI make) etc.
1
-
1884
... More
S/F of Outdoor type 63 Amp High mast timer panel of size 24"x24"x12"made out of 16 SWG CR Sheet duly powder coated, front side opening with provision of double door having following components: IN COMING a) 63 A 4P MCB MAKE : L&T : 1 No, b) 40 A 4P MCB Make : L&T : 1 No. c) 100 A TPN Coppeer Bus Bar : 1 set d) RYB Indicating Lamp : 1 set OUT GOING a) 40 A 4 Pole contactor Make : L&T : 1 nos. b) 9 A TP MCB Make : L&T : 2 No. c) 1.4 - 2.3A Over Load Relay Make L&T : 1 Nos d)24 Hr digital Time switch make L&T : 1 Nos.
1
-
45983
... More
S/F of decorative Lawn light made up of high grade unbreakable polycarbonate material of Havells(grace small model) make/Equivalent
22
-
1218
... More
S/F of 25wt landscape Post-top Energy saving aesthetically desined with high power LED light of Havells (Model RUBY (Clear) IP-65 ) make/equivalent
4
-
8815
... More
S/F of 10watt Bulb with colour temparature 3000K (Warm) of havels/HPL make.
24
-
157
... More
S/F of 25mm dia 2.5 metre GI pipe of ISI marked for gate light arrangement with color painting as per direction of Engineer-in-charge
26
-
389
... More
Excavation of pole pit in all kind of soil including rock of all verity of size 600mm x 600mm and depth 1200 mm with filling of sand to a height of 100mm ,100mm metal concrete and then laying foundation of Reinforced cement concrete (1:2:4) of 450mm x 450mm x 1000mm high with granite metal of nominal size 20mm to 25mm including side shuttering and grouting of foundation bolts and supply and erection of pole as specified above including watering and ramming it a required including provision for passage of cables and finishing the surface with 1:4 ratio cement plaster .
3
-
4500
... More
Fixing of gate light and lawn light with Existing concrete base including cutting ,Filling of base structure complete with all required secondary materials i.e nuts bolts ,washer screw
22
-
291
... More
Color painting of GI Pipe as per direction of Engineer-in-charge
22
-
164
... More
S/F of Weather proof Junction box complete with all accessories including connectors,Bus bar Flats, glands as required with loop in loop out facility make of Sintex/havells/L&T
8
-
895
... More
S/F of 32Amp DPswitch.complete with connection as per required.
4
-
214
... More
S/F 2 x 6 mm2 PVC Al Armoured Cable Of ISI Marked (Polycab/Nicco/Havels)
459
-
108
... More
Cable Treanching in all type os Soil including excavation of earth,laying of cable upto25mm2 & filling of loose soil upto ground level .
1
-
13300
... More
Supply 3watt LED 3000K Crysta COB Swivel down light of make Havells/Bajaj.
6
-
684
... More
S/F of 16CH 4 SATA Network Video Recorder with H265/H264 dual codec decoding & support for multi brand network cameras of make CP-Plus
1
-
14654
... More
S/F of 2 Megapixel full hd outdoor IP bullet camera having cmos image sensor ,WDR( 120DB) complete with all features i.e IR range of 30mtr,25fps/30fps, Day/night vision,zooming facility etc of make CP Plus/Hik vision
5
-
5275
... More
S/F of 2 Megapixel full hd outdoor IP dome camera having cmos image sensor ,WDR( 120DB) complete with all features i.e IR range of 30mtr,25fps/30fps, Day/night vision,zooming facility etc of make CP Plus/ Hik vision
7
-
4689
... More
S/F of 4TB HARD-DISK for data storage of make Toshiba/Transcend/Seagate/equivalent
1
-
12309
... More
S/F of 32inch LED Monitor/TV for visual Display of surveliance system of make Toshiba/F&D/LG /equivalent
1
-
16000
... More
S/F of RJ connector pin of reputed make as per direction of engineer in charge
24
-
29
... More
S/F of POE Gigabyte Switch of reputed make
2
-
6448
... More
Cost for laying of CCTV cable with 25mm dia PVC Pipe including saddling clipping,Connectors for connection to TV etc as direction of engineer in charge
1
-
8900
... More
Supply of Cat-6 cable of make V-guard or equivalent as per direction of engineer in charge
748
-
28
... More
PH FOR THE WORK:- Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.
-
-
-
... More
20mm dia PVC Pipe
25
-
111.2
... More
25mm dia PVC Pipe
50
-
146.7
... More
32mm dia PVC Pipe
80
-
190.9
... More
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
... More
15mm dia CP angle stop cock (Jaquar)CON-CHR-059KN
15
-
664.4
... More
15mm dia CP two way bib cock (Jaquar)CON-041KN
2
-
910.5
... More
15mm dia CP short body bib cock (Jaquar)CON-CHR-047KN
5
-
787.5
... More
25mm dia brass full way valve (Shakti make)
10
-
924.7
... More
32mm dia brass full way valve (Shakti make)
4
-
1353.6
... More
25mm dia CP Health Faucet (Jaquar Make)ALD - CHR - 565
2
-
1058.1
... More
15mm CP Extension piece
22
-
59.3
... More
125mm CP grating
10
-
81.8
... More
15mm size C.P. flange
22
-
40.3
... More
25mm size brass ball cock with ball
2
-
924.8
... More
Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge
-
-
-
... More
2000 liters capacity PVC water storage tank
4
-
32106.7
... More
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.
6
-
43.6
... More
Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge
4
-
149
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
40
-
157.3
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
... More
110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
50
-
383.9
... More
110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)
7
-
225
... More
110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
4
-
131.7
... More
110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
10
-
72.3
... More
110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
4
-
115.2
... More
110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
4
-
38.4
... More
110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make)
4
-
176.8
... More
110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
7
-
115.2
... More
110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
15
-
32.4
... More
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
... More
580mm size Orissa pan (Hindware/Parryware/Neycer make)
2
-
2155.2
... More
Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
-
-
-
... More
10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
3
-
1538.3
... More
Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal
3
-
2170.9
... More
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
-
-
-
... More
European water closet with 'p' trap plain(Hindware/Parryware/Neycer make)
1
-
2563
... More
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
-
-
-
... More
Counter Top Basin (560x455) (Perryware/Hindware/nycer Make) white with 15mm C.P. Pillar cock (jaquar/essco)
4
-
4017.5
... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
25mmx600mm long CP towel rail CAN - ACR - 1111BNM
3
-
1722.6
... More
Towel ring CAN - BCH - 1121
4
-
994.2
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
-
-
-
... More
600mmx450mm size B.E mirror (swivelled type)
4
-
621.5
... More
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
CP soap holder (Jaquar)CAN - MCH - 1131N
6
-
664.4
... More
Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
8
-
169.7
... More
Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
4
-
105.9
... More
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge
-
-
-
... More
Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
4
-
7546.2
... More
Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge
1
-
1295.5
... More
Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site.
8.08
-
328.4
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
1.5
-
3842.5
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
1.5
-
5541.8
... More
Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed series to be pre-approved by the Engineer-in-charge )
-
-
-
... More
Ceramic tile
30.5
-
820.1
... More
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
85.6
-
146.1
... More
Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge )
-
-
-
... More
Glazed tile
85.6
-
1052
... More
Granite Tiles
2.18
-
1783.4
... More
Supplying all materials, labour, T&P and providing brick work in super structure with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
0.95
-
4254.6
... More
Supplying all materials labor T&P and fitting & fixing 40mm to 50mm thick marble partition wall or screen wall including cutting grooves and mending good the damages with cement concrete (1:2:4) using 12mm size hard granite chips including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complate as per specification and direction of the Engineer in charge
2.25
-
808.8
... More
Factory made single leaf rigid FRP(alternately called GRP) sanwhch composite door shutter of 32mm thick laminated ith two GRP skins with wood grain finish fabricated using UV-stabilised Isothealica Gelcoat and one layer of 450 gsm E-glass chopped starand mat (CSM) impregnated with orthopthalic palyester resin. The thikness of the skins shall not be less that 1.50mm expanded polyestyrone(EPS) stuctural foam panel of 29 mm thickness and a density of 20Kg/cu.mtr shall be used as core material .Wooden reinforcements made of seasoned sal wood reinforements for fitting the metal fittings such as tower bolts ,aldrops,handles etc. shall be provided .A Strictira; adehsive compatible with(EPS) foam shall be used for bending the core material,the sal wood reiforcements and the skins.The materials and process for manufacturing the door shutters shall conform to RC-TIFAC composites Design centre's standars and specifications and the door shutters tested in conformation to IS:40250-1998.The finish of door shutter will be plain colour white/Lvory/beige/Light grey/Mahogany/Teak wood of any other colour using high quality pigments .Three heavy whight mild steel butt hinges typpe-I(ISI-marked) size 100 mm are to be fitted on one side of shutter.
4.72
-
3200
... More
Factory made FRP (alternately called GRP) door frame of sixe75mmX100 mm fabricated using E-Glass chopped strand Mat(CSM) U.V stabilised inopthalic Gelcoat and impregnated with inopthalic resin.The thickness of the GRP sikns shall no be less that 2.00 mm .The door frame consist of foru segments which are provided with plug-in-socket arrangement in-site in the ,ould .The segments are plugged in and are joined together by means of screw . The GRP frame shall be provided with wooedn rainforcement of six locations for high screw holding capacity for fixing metallic hold fast and shall be consolidated by filling with medium destity foam/Plaster of paris with fibre reinforcement,Six numbers of 260mm X 25mm X 5 mm size 'S' shaped M.S flat hold fast shall be provided with the frame .The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design centre's stanards and specifications.The finish of door rrame will be plain colour white/Lvory/Beige/Light grey Golden brown Mahogany/Teak wood sand stone/Champagne /Pastel blue or any other colour using high quality pigments cimplete in all respect as per specification and direction of the Engineer in Charge.
14.85
-
572.4
... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge
-
-
-
... More
100mm dia P.V.C. pipe
25
-
966.1
... More
Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification.
-
-
-
... More
MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover )
1
-
14723.3
... More
Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
2
-
17178.1
... More
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.
29.2
-
196.7
... More
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft.
19.47
-
211.15
... More
Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.
33
-
109.28
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
4.38
-
5541.8
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.
1.53
-
6209.5
... More
Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
1.55
-
6249.3
... More
Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge
-
-
-
... More
RCC floor, roof slab chhaja up to 4.430 m height
7.67
-
423.5
... More
Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge.
15.84
-
4462.5
... More
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
34.76
-
160.1
... More
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:6) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
34
-
134.4
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge
34
-
30.9
... More
Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge.
2
-
327.8
... More
Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge.
2.16
-
328.4
... More
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
-
-
-
... More
Drilling of 200mm dia bore
-
-
-
... More
00 mtr to 30mtr
60
-
755.48
... More
Drilling of 150mm dia bore
-
-
-
... More
45 mtr to above
160
-
554.49
... More
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
-
-
-
... More
Lowering of 200mm dia P.V.C casing pipes
-
-
-
... More
00 mtr to 30 mtrs
60
-
138.2
... More
Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.
-
-
-
... More
200mm dia PVC (sch-80) pipe
60.4
-
1633.8
... More
Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)
2
-
789.8
... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
-
-
-
... More
By DTH Rig
2
-
4994.8
... More
Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation:
-
-
-
... More
Rocky terrain with boulder formation for 300m depth
4
-
1122.11
... More
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make)
-
-
-
... More
1 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm
2
-
16737.2
... More
DOL Control panel
2
-
3805.5
... More
40mm dia steel short piece
2
-
152.3
... More
Well cap
2
-
152.3
... More
50mm size CI bracket
2
-
91.3
... More
2.50sqmm flat cable
200
-
128.1
... More
20mm dia rigid UPVC pipes
80
-
6.9
... More
Steel rope with cover
80
-
26.7
... More
Labour charges for lowering including transportation
2
-
2000
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge
-
-
-
... More
32mm HDPE pipes (Finolex/Supreme make)
90
-
99.8
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC, SWR soil waste ventilating pipes and fitting of the following outside diameter conforming to 13592/1992 to walls with nails bobbins and wooden plugs or laying in trenches including with supply of approved rubber lubricant by non-heat application method as per manufactures specification testing earth work in excavation in all kinds of soil and refilling of trenches all complete as per specification and direction of the Engineer in charge.
-
-
-
... More
110mm U-PVC SWR Pipe
60
-
383.9
... More
110mm U-PVC Plain bend (Ori Plast/Finolex/Supreme Make)
4
-
72.3
... More
110mm U-PVC Socket (Ori Plast/Finolex/Supreme Make)
2
-
32.9
... More
125mm CP grating
1
-
81.8
... More
Supplying all materials labor T&P and binding glazed stone ware pipes and aligning to requisite gradient inside the trench to jointing with tarred cascade and cement motor prop.(1:1 )encasing the pipe all around with CC(1:3:6) with washed gravel CC(1:4:8) with hard stone metal size 25mm to 50mm on bed on the trench lowering the pipe to bed on trenches in earth work in excavation trenches in all kinds of soil and refilling the same in 30mm layers watering ramming and removal of surplus earth disorient sewer line including use of T&P sight rails binding rods plug lights etc .all complete as per P.H .Specification. All round concrete encasing up to 1.50metre depth.
-
-
-
... More
160mm dia P.V.C.
10
-
1585.1
... More
Supplying all materials labour T&P and constructing 1.80m dia x 2.60 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
2
-
37012
... More
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge
-
-
-
... More
Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
1
-
7546.2
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements