Works Department Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 70,200Document Cost
₹ 10,000Tender Fee
Refer Documents
Summary
Construction Of F Type Quarters Gf Plus 2 For Staff Of Revenue Department Inside The Premises Of Circuit House In The District Of Rayagada Civil Ei And Gph
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_EICCL_61411_1Bid Award Id
ViewTender No
RC (RANDB) RGD 04 / 2020-21Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
In Ground Floor
R.R. H.G. stone masonry in Cement Mortar (1:6) in foundation and plinth using Hard Black Granite stones of approved size and quality free from weathered skin and from approved quarry including splays cutting, circular molding chamfering & all similar such type of operations with necessary projections, chamfering & corbelling watering and curing etc including cost & conveyance , royalties and taxes of all materials with all labour with T&P required for the work etc. complete as per drawing and Technical specification and as directed by the Engineer-in-Charge.
46.25
-
3372.49
... More
In Ground Floor
Back filling of surplus excavated earth at work site by initial lead of 50m and initial lift 1.5m including cost of all labour, T&P and dewatering if required for the work etc. complete as per drawing and Technical specification and as directed by the Engineer-in-Charge.
202.38
-
99.22
... More
In Ground Floor (RCC M-20 Concrete in Column below Plinth) RCC work of M-20 grade in the following Structural building works using 20mm down graded hard black granite Crusher broken aggregates of approved quality from approved quarry including mixing hoisting lowering laying compacting concrete using concrete mixer, vibrator watering and curing for four weeks centering and shuttering and finishing the exposed surfaces smooth as per relevant clauses of section 1700 of MORT&H specification for Road & Bridge works (4th Revision) including hire and running charges of all machineries including cost, conveyance, royalty and taxes of all materials and labour with T&P required for the work etc. complete as per drawing and Technical Specification and as directed by the Engineer-in- Charge.(Excluding cost of reinforcement & binding wires to be used in the work)
38.62
-
4488.09
... More
In Ground Floor (RCC M-20 Concrete in Plinth Beam)
RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect…
11.93
-
4844.87
... More
In Ground Floor (RCC M-20 Concrete in Column shaft)
RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
3.95
-
11472.16
... More
In First Floor (RCC M-20 Concrete in Column shaft)
Providing RCC with M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
3.23
-
12978.93
... More
In Second Floor (RCC M-20 Concrete in Column shaft)
Providing RCC with M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
3.23
-
14783.09
... More
In Third Floor (RCC M-20 Concrete in Column shaft)
Providing RCC with M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
0.53
-
16943.55
... More
In Ground Floor (RCC M-20 Concrete in Lintel)
RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
3.52
-
7941.44
... More
In First Floor (RCC M-20 Concrete in Lintel)
RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
3.31
-
8742.06
... More
In Second Floor (RCC M-20 Concrete in Lintel)
RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
3.31
-
9698.81
... More
In Ground Floor (RCC M-20 Concrete in Chajja)
RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
24.5
-
747.5
... More
In First Floor (RCC M-20 Concrete in Chajja) RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
24.5
-
845.78
... More
In Second Floor (RCC M-20 Concrete in Chajja) RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
24.5
-
963.51
... More
In Ground Floor (RCC M-20 Concrete in Fin) RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
16.44
-
1555.97
... More
In First Floor (RCC M-20 Concrete in Fin) RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
16.44
-
1804.15
... More
In Second Floor (RCC M-20 Concrete in Fin) RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
16.44
-
963.51
... More
In Ground Floor (RCC M-20 Concrete in Roof Beam) RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
5.3
-
11472.16
... More
In First Floor (RCC M-20 Concrete in Roof Beam) RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
4.74
-
12978.93
... More
In Second Floor (RCC M-20 Concrete in Roof Beam) RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
4.74
-
14783.09
... More
In Third Floor (RCC M-20 Concrete in Roof Beam) RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
0.63
-
16943.55
... More
In Ground Floor (RCC M-20 Concrete in Roof Slab)
RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
16.35
-
8568.86
... More
In First Floor (RCC M-20 Concrete in Roof Slab)
RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
13.59
-
9494.93
... More
In Second Floor (RCC M-20 Concrete in Roof Slab) RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
13.59
-
10602.36
... More
In Third Floor (RCC M-20 Concrete in Roof Slab) RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
1.65
-
11926.55
... More
In Ground Floor (RCC M-20 Concrete in Stair Case) RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
1.87
-
9542.11
... More
In First Floor (RCC M-20 Concrete in Stair Case) RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
1.87
-
10662.86
... More
In Second Floor (RCC M-20 Concrete in Stair Case) RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
1.87
-
12003.81
... More
In Ground Floor (RCC M-20 Concrete in Shelves) RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
11.63
-
328.89
... More
In First Floor (RCC M-20 Concrete in Shelves) RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
11.63
-
355.28
... More
In Second Floor (RCC M-20 Concrete in Shelves) RCC work of M-20 grade using 20mm and down graded chips including of all centering and shuttering etc complete in all respect……………
11.63
-
386.75
... More
In Ground Floor (HYSD Steel reinforcement works)
Supplying fitting and placing uncoated HYSD Steel reinforcement works using HYSD (FE-500) (SAIL Only) steel of approved manufacturer as per section 1600 §ion 1900 of MORT&H specification for Road and Bridge works ( 4th revision) including cost, conveyance and taxes of all materials, binding wires 18 to 20 gauge and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. (weight of reinforcement sall be calculated on the basis of IS 1732. wastage, overlaps, couplings, welded joints, space bars, chairs, stays, hangers and annealed steel wires or other method of binding & placing shall not be considered for payment)
101.75
-
5343.31
... More
In First Floor (HYSD Steel reinforcement works)
Supplying fitting and placing uncoated HYSD Steel reinforcement works using HYSD (FE-500) (SAIL Only) steel of approved manufacturer ………………………….
37.49
-
5365.83
... More
In Second Floor (HYSD Steel reinforcement works)
Supplying fitting and placing uncoated HYSD Steel reinforcement works using HYSD (FE-500) (SAIL Only) steel of approved manufacturer ………………………….
37.49
-
5389.46
... More
In Third Floor (HYSD Steel reinforcement works)
Supplying fitting and placing uncoated HYSD Steel reinforcement works using HYSD (FE-500) (SAIL Only) steel of approved manufacturer ………………………….
3.87
-
5414.28
... More
In Ground Floor (Fly ash brick in C.M. 1:6 in Superstructure)
Fly ash brick masonry in cement mortar (1:6) in Superstructure using bricks of “23cmx11cmx8cm" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge.
48.95
-
3996.25
... More
In First Floor (Fly ash brick in C.M. 1:6 in Superstructure)
Fly ash brick masonry in cement mortar (1:6) in Superstructure using bricks of “23cmx11cmx8cm" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use..................
48.7
-
4248.22
... More
In Second Floor (Fly ash brick in C.M. 1:6 in Superstructure)
Fly ash brick masonry in cement mortar (1:6) in Superstructure using bricks of “23cmx11cmx8cm" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use..................
48.7
-
4537.99
... More
In Third Floor (Fly ash brick in C.M. 1:6 in Superstructure)
Fly ash brick masonry in cement mortar (1:6) in Superstructure using bricks of “23cmx11cmx8cm" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use..................
15.71
-
4871.23
... More
In Ground Floor (Fly ash brick in C.M. 1:4 in Superstructure)
Fly ash brick masonry in cement mortar (1:4) in Superstructure using bricks of “23cmx11cmx8cm" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge.
1.47
-
4183.75
... More
In First Floor (Fly ash brick in C.M. 1:4 in Superstructure)
Fly ash brick masonry in cement mortar (1:4) in Superstructure using bricks of “23cmx11cmx8cm" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use............
1.47
-
4402.85
... More
In Second Floor (Fly ash brick in C.M. 1:4 in Superstructure)
Fly ash brick masonry in cement mortar (1:4) in Superstructure using bricks of “23cmx11cmx8cm" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use............
1.47
-
4725.5
... More
In Ground Floor (16 mm thick Cement Plaster in 1:6)
16 mm thick Cement Plaster (1:6) with screened and washed sharp sand for mortar and finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required and scaffolding required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.
272.16
-
184.46
... More
In First Floor (16 mm thick Cement Plaster in 1:6)
16 mm thick Cement Plaster (1:6) with screened and washed sharp sand for mortar and finished smooth to masonry brick walls………..
259.18
-
189.11
... More
In Second Floor (16 mm thick Cement Plaster in 1:6)
16 mm thick Cement Plaster (1:6) with screened and washed sharp sand for mortar and finished smooth to masonry brick walls………..
259.18
-
193.91
... More
In Third Floor (16 mm thick Cement Plaster in 1:6)
16 mm thick Cement Plaster (1:6) with screened and washed sharp sand for mortar and finished smooth to masonry brick walls………..
27.73
-
198.85
... More
In Ground Floor (12 mm thick Cement Plaster in 1:6 both inside & out Side the wall)
12 mm thick Cement Plaster (1:6) with screened and washed sharp sand for mortar and finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required and scaffolding required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.
334.38
-
129
... More
In First Floor (12 mm thick Cement Plaster in 1:6 both inside & out Side the wall)
12 mm thick Cement Plaster (1:6) with screened and washed sharp sand for mortar and finished smooth to masonry brick walls…..
283.85
-
132.13
... More
In Second Floor (12 mm thick Cement Plaster in 1:6 both inside & out Side the wall)
12 mm thick Cement Plaster (1:6) with screened and washed sharp sand for mortar and finished smooth to masonry brick walls…..
283.85
-
135.36
... More
In Third Floor (12 mm thick Cement Plaster in 1:6 out Side the wall)
12 mm thick Cement Plaster (1:6) with screened and washed sharp sand for mortar and finished smooth to masonry brick walls…..
121.78
-
138.7
... More
In Ground Floor (6 mm thick Cement Plaster in 1:4 for both inside & out Side the wall)
6 mm thick Cement Plaster (1:4) with screened and washed sharp sand for mortar and finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required and scaffolding required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.
178.58
-
145.16
... More
In First Floor (6 mm thick Cement Plaster in 1:4 for both inside & out Side the wall)
6 mm thick Cement Plaster (1:4) with screened and washed sharp sand for mortar and finished smooth to masonry brick walls………
154.98
-
148.81
... More
In Second Floor (6 mm thick Cement Plaster in 1:4 for both inside & out Side the wall)
6 mm thick Cement Plaster (1:4) with screened and washed sharp sand for mortar and finished smooth to masonry brick walls………
154.98
-
152.58
... More
In Third Floor(6 mm thick Cement Plaster in 1:4 for both inside wall)
6 mm thick Cement Plaster (1:4) with screened and washed sharp sand for mortar and finished smooth to masonry brick walls………
10
-
156.46
... More
In Ground Floor (2.5 cm thick grading Concrete in 1:2:2)
2.5 cm (1") thick grading Concrete in proportion (1:2:2) using 6mm size crusher broken hard granite stone chips approved quality from approved quarry with screened and washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing woith including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
22.08
-
270.61
... More
In Second Floor(2.5 cm thick grading Concrete in 1:2:2)
2.5 cm (1") thick grading Concrete in proportion (1:2:2) using 6mm size crusher broken hard granite stone chips approved quality from approved quarry…………..
108.74
-
327.51
... More
In Third Floor (2.5 cm thick grading Concrete in 1:2:2)
2.5 cm (1") thick grading Concrete in proportion (1:2:2) using 6mm size crusher broken hard granite stone chips approved quality from approved quarry…………..
13.19
-
362.61
... More
In Ground Floor (Vertified tiles 600mm x 600mm size)
Suppllying, fitting and fixing of Vertified tiles (600 mm x 600 mm) coloured / Printed sereies (Homogenous) in floors (marbonite or equivalent make) in all floors over 20 mm thick bed of Cement moratr (1:4) jointed with neat cement slurry mixed with with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc completeas per drawing and Technical Specification and as directed by the Engineer-in- Charge.
62.92
-
936.8
... More
In First Floor (Vertified tiles 600mm x 600mm size)
Suppllying, fitting and fixing of Vertified tiles (600 mm x 600 mm) coloured / Printed sereies (Homogenous) in floors (marbonite or equivalent make) in all floors over 20 mm thick bed of Cement moratr (1:4) jointed with neat cement slurry mixed with with pigment to match the shades of the tiles...................
62.92
-
946.16
... More
In Second Floor (Vertified tiles 600mm x 600mm size)
Suppllying, fitting and fixing of Vertified tiles (600 mm x 600 mm) coloured / Printed sereies (Homogenous) in floors (marbonite or equivalent make) in all floors over 20 mm thick bed of Cement moratr (1:4) jointed with neat cement slurry mixed with with pigment to match the shades of the tiles...................
62.92
-
955.99
... More
In Ground Floor (Vertified industrial tiles 30mm x 30mm)
Suppllying, fitting and fixing of Vertified industrial tiles (30 mm x 30 mm) in floors (marbonite or equivalent make) in all floors over 20 mm thick bed of Cement moratr (1:4) jointed with neat cement slurry mixed with with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc completeas per drawing and Technical Specification and as directed by the Engineer-in- Charge.
31.63
-
817.11
... More
In First Floor (Vertified industrial tiles 30mm x 30mm)
Suppllying, fitting and fixing of Vertified industrial tiles (30 mm x 30 mm) in floors (marbonite or equivalent make) in all floors over 20 mm thick bed of Cement moratr (1:4) jointed with neat cement slurry mixed with with pigment to match the shades of the tiles.....
10.05
-
826.46
... More
In Second Floor (Vertified industrial tiles 30mm x 30mm)
Suppllying, fitting and fixing of Vertified industrial tiles (30 mm x 30 mm) in floors (marbonite or equivalent make) in all floors over 20 mm thick bed of Cement moratr (1:4) jointed with neat cement slurry mixed with with pigment to match the shades of the tiles.....
10.05
-
836.28
... More
In Ground Floor (Chequred tiles with C.M. 1:4)
Suppllying, fitting and fixing of Chequred tiles in floors (marbonite or equivalent make) in all floors over 20 mm thick bed of Cement moratr (1:4) jointed with neat cement slurry mixed with with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc completeas per drawing and Technical Specification and as directed by the Engineer-in- Charge.
2.75
-
471.31
... More
In Ground Floor (Vertified tiles 600mm x 600mm with C.M. 1:3)
Supplying, fitting and fixing of Vertified tiles (600 mm x 600 mm) coloured / Printed sereies (Homogenous) in Dadoes stracking (marbonite or equivalent make) in all floors over 12 mm thick bed of Cement moratr (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc complete as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
15.58
-
946.92
... More
In First Floor (Vertified tiles 600mm x 600mm with C.M. 1:3)
Supplying, fitting and fixing of Vertified tiles (600 mm x 600 mm) coloured / Printed sereies (Homogenous) in Dadoes stracking (marbonite or equivalent make) in all floors over 12 mm thick bed of Cement moratr (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles.......
15.58
-
961
... More
In Second Floor (Vertified tiles 600mm x 600mm with C.M. 1:3)
Supplying, fitting and fixing of Vertified tiles (600 mm x 600 mm) coloured / Printed sereies (Homogenous) in Dadoes stracking (marbonite or equivalent make) in all floors over 12 mm thick bed of Cement moratr (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles.......
15.58
-
975.78
... More
In Ground Floor (Vertified industrial tiles 30 mm x 30 mm with C.M. 1:3)
Supplying, fitting and fixing of Vertified industrial tiles (30 mm x 30 mm) in Dadoes stracking (marbonite or equivalent make) in all floors over 12 mm thick bed of Cement moratr (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and taxes of all materials, cost of all labour, T&P etc complete as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
9.77
-
850.68
... More
In First Floor (Vertified industrial tiles 30 mm x 30 mm with C.M. 1:3)
Supplying, fitting and fixing of Vertified industrial tiles (30 mm x 30 mm) in Dadoes stracking (marbonite or equivalent make) in all floors over 12 mm thick bed of Cement moratr (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles.......
5.87
-
913.53
... More
In Second Floor (Vertified industrial tiles 30 mm x 30 mm with C.M. 1:3)
Supplying, fitting and fixing of Vertified industrial tiles (30 mm x 30 mm) in Dadoes stracking (marbonite or equivalent make) in all floors over 12 mm thick bed of Cement moratr (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles.......
5.87
-
928.32
... More
In Ground Floor (sal wood work framed)
Dressed and well seasoned sal wood work framed and fixed (wrought and put up) in choukaths for doors, windows and ventilators including cost of iron works and coal traing 2 coats to wall side faces of choukaths including cost of coaltar, cutting grooves and mending sizes where necessary with cost and conveyance royalities and taxes of all materials and labour with T&P required for the work etc complete in all respect in all floors as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
0.99
-
48905.64
... More
In First Floor (sal wood work framed)
Dressed and well seasoned sal wood work framed and fixed (wrought and put up) in choukaths for doors, windows and ventilators including cost of iron works and coal traing 2 coats to wall side faces of choukaths……….........
0.99
-
48905.64
... More
In Second Floor (sal wood work framed)
Dressed and well seasoned sal wood work framed and fixed (wrought and put up) in choukaths for doors, windows and ventilators including cost of iron works and coal traing 2 coats to wall side faces of choukaths……….........
0.99
-
48905.64
... More
In Ground Floor (32 mm thick piasal wood or local teak wood paneled shutters) Supplying,fitting and fixing in position well dressed and well seasoned 32 mm thick piasal wood or local teak wood paneled shutters (32mm trhick style with 18mm panel) and fixing (wrought and put up) in door windows including cost of iron works and coaltaring two coat wall side faces of chowkhats including costof coaltar cutting grooves and mending size where necessary with cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect in all floors as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
29.52
-
4214.55
... More
In First Floor (32 mm thick piasal wood or local teak wood paneled shutters) Supplying,fitting and fixing in position well dressed and well seasoned 32 mm thick piasal wood or local teak wood paneled shutters (32mm trhick style with 18mm panel) and fixing (wrought and put up) in door windows including cost of iron works and coaltaring two coat wall side faces of chowkhats............
29.52
-
4214.55
... More
In Second Floor (32 mm thick piasal wood or local teak wood paneled shutters) Supplying,fitting and fixing in position well dressed and well seasoned 32 mm thick piasal wood or local teak wood paneled shutters (32mm trhick style with 18mm panel) and fixing (wrought and put up) in door windows including cost of iron works and coaltaring two coat wall side faces of chowkhats............
29.52
-
4214.55
... More
In Ground Floor (Factory made FRP door / Window frame)
Factory made FRP door / Window frame (Alternately called GRP) of size 75mm x 100mm fabricated using E-glass Chopped strand mat (CSM) U.V stabilised inopthalic gel coat and impregnated with inopthelic resin. The thickness of the GRP skins shall not be less than 2.00 mm. The door frame consists of four segments, which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw . The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for fixing metalic hold fast and shall be consolidated by filling with medium density foam / plaster of paris with fiber reinforcement. The finish of door frame will be plain and different color using high quality pigments complete in all respect as per specification and direction of the Engineer-in-Charge.
10.04
-
73
... More
In First Floor (Factory made FRP door / Window frame)
Factory made FRP door / Window frame (Alternately called GRP) of size 75mm x 100mm fabricated using E-glass Chopped strand mat (CSM) U.V stabilised inopthalic gel coat and impregnated with inopthelic resin………………..
10.04
-
115
... More
In Second Floor (Factory made FRP door / Window frame)
Factory made FRP door / Window frame (Alternately called GRP) of size 75mm x 100mm fabricated using E-glass Chopped strand mat (CSM) U.V stabilised inopthalic gel coat and impregnated with inopthelic resin………………..
10.04
-
115
... More
In Ground Floor (Factory made single leaf rigid FRP sandwich composite door / Window shutter)
Factory made single leaf rigid FRP sandwich composite door / Window shutter (Alternately called GRP) of 32mm thick laqminated with two GRP skins wood grain finish fabricated using U.V stabilised isopthalic gel coat and one layer of 450 gsm E-glass chopped strand mat (CSM) impregnated with orthopthelic polyster resin. The thickness of the skins shall not be less than 1.50 mm Expanded Polystyrone (EPS) structural foam panel of 29mm thickness and a density of 20 kg/cu. mtr shall be used as core material. Wooden reinforcements made oif seasoned sal wood block of cores section not less than 28mm x 32m,m and also necessary sal wood reinforcements for fitting the metal fittings such as towewr bolts , aldrops, handles etc shall be provided. A structural adhesive compatible with (EP[S) foam shall be used for bending the core material. The finish of door shutter will be plain color as per specification and direction of the Engineer-in-charge.
2.75
-
2814.53
... More
In First Floor (Factory made single leaf rigid FRP sandwich composite door / Window shutter)
Factory made single leaf rigid FRP sandwich composite door / Window shutter (Alternately called GRP) of 32mm thick laqminated with two GRP skins wood grain finish fabricated using U.V stabilised isopthalic gel coat and one layer of 450 gsm E-glass chopped strand mat (CSM) impregnated with orthopthelic polyster resin.....
2.75
-
2814.53
... More
In Second Floor (Factory made single leaf rigid FRP sandwich composite door / Window shutter)
Factory made single leaf rigid FRP sandwich composite door / Window shutter (Alternately called GRP) of 32mm thick laqminated with two GRP skins wood grain finish fabricated using U.V stabilised isopthalic gel coat and one layer of 450 gsm E-glass chopped strand mat (CSM) impregnated with orthopthelic polyster resin.....
2.75
-
2814.53
... More
In Ground Floor (MS Grills)
Supplying, fitting, fixing of all types of MS Grills made of ISI marked standard MS Angles of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings, including mending to sizes supplying and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.
8.06
-
5600
... More
In First Floor (MS Grills)
Supplying, fitting, fixing of all types of MS Grills made of ISI marked standard MS Angles of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings……….
4.56
-
5600
... More
In Second Floor (MS Grills)
Supplying, fitting, fixing of all types of MS Grills made of ISI marked standard MS Angles of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings……….
4.56
-
5600
... More
In Third Floor (MS Grills)
Supplying, fitting, fixing of all types of MS Grills made of ISI marked standard MS Angles of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings……….
0.81
-
5600
... More
In Ground Floor (Fixed Ventilators )
Providing an fixing of Fixed Ventilators of approved make to be fabricated from roll formed sections made of pre-painted steel with paint specification being with primer of 5-7 microns and finished paint with polyster paint of 12-16 microns along with the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46 x 70 mm and fixed beadings are of 18x 25 mm. All corner brackets are to be made of CRCA with zinc phosphating. Glass to be used of 5mm reflective with cost, conveyance, and taxes of all materials, cost of all labour , T&P etc complete as per drawing and Technical Specification and as directed by the Engineer-in-Charge.
1.3
-
4682.05
... More
In First Floor (Fixed Ventilators )
Providing an fixing of Fixed Ventilators of approved make to be fabricated from roll formed sections made of pre-painted steel with paint specification being with primer of 5-7 microns and finished paint with polyster paint of 12-16 microns along with the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46 x 70 mm and fixed beadings are of 18x 25 mm..............
1.3
-
4682.05
... More
In Second Floor (Fixed Ventilators )
Providing an fixing of Fixed Ventilators of approved make to be fabricated from roll formed sections made of pre-painted steel with paint specification being with primer of 5-7 microns and finished paint with polyster paint of 12-16 microns along with the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46 x 70 mm and fixed beadings are of 18x 25 mm..............
1.3
-
4682.05
... More
In Third Floor (Fixed Ventilators )
Providing an fixing of Fixed Ventilators of approved make to be fabricated from roll formed sections made of pre-painted steel with paint specification being with primer of 5-7 microns and finished paint with polyster paint of 12-16 microns along with the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46 x 70 mm and fixed beadings are of 18x 25 mm..............
1.3
-
4682.05
... More
In Ground Floor (Partly fixed, partly top hung and partly louvered windows )
Providing and fixing of Partly fixed, partly top hung and partly louvered windows of approved make to be fabricated from roll formed sections masde of pre -painted steel with paint specification being with primer of 5-7 microns and finished paint with polyster paint of 12-16 microns along with the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46 x 70 mm and fixed beadings are of 18x 25 mm. Top hung shutter should be 46 x 46mm. All corner backers are to be made of CRCA with zinc phosphating. Glass to be used of 5mm reflective with cost, conveyance, and taxes of all materials, cost of all labour , T&P etc complete as per drawing and Technical Specification and as directed by the Engineer-in-Charge.
0.56
-
4393.26
... More
In First Floor (Partly fixed, partly top hung and partly louvered windows )
Providing and fixing of Partly fixed, partly top hung and partly louvered windows of approved make to be fabricated from roll formed sections masde of pre -painted steel with paint specification being with primer of 5-7 microns and finished paint with polyster paint of 12-16 microns along with the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46 x 70 mm and fixed beadings are of 18x 25 mm...........
0.56
-
4393.26
... More
In Second Floor (Partly fixed, partly top hung and partly louvered windows )
Providing and fixing of Partly fixed, partly top hung and partly louvered windows of approved make to be fabricated from roll formed sections masde of pre -painted steel with paint specification being with primer of 5-7 microns and finished paint with polyster paint of 12-16 microns along with the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46 x 70 mm and fixed beadings are of 18x 25 mm...........
0.56
-
4393.26
... More
In Ground Floor (Stainless Steel in hand railing )
Supplying fitting and fixing of Stainless Steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx 2mm @ 0.90mtr C/C and Stainless square pipe bracing of size 32mmx 32mmx 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing,etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
6
-
2885.71
... More
In First Floor (Stainless Steel in hand railing )
Supplying fitting and fixing of Stainless Steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx 2mm @ 0.90mtr C/C and Stainless square pipe bracing of size 32mmx 32mmx 2mm in 3 rows in stair case as per approved design and specification...........
6
-
2885.71
... More
In Second Floor (Stainless Steel in hand railing )
Supplying fitting and fixing of Stainless Steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx 2mm @ 0.90mtr C/C and Stainless square pipe bracing of size 32mmx 32mmx 2mm in 3 rows in stair case as per approved design and specification...........
6
-
2885.71
... More
In Ground Floor (Inside & Out Side)
Finishing plastered surfaces with Cement washing One coat using cement over the prepared surface of the walls and ceiling including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
785.09
-
13.51
... More
In First Floor (Inside & Out Side)
Finishing plastered surfaces with Cement washing One coat using cement over the prepared surface of the walls and ceiling………..
698.02
-
13.87
... More
In Second Floor (Inside & Out Side)
Finishing plastered surfaces with Cement washing One coat using cement over the prepared surface of the walls and ceiling………..
698.02
-
14.24
... More
In Third Floor (Inside & Out Side)
Finishing plastered surfaces with Cement washing One coat using cement over the prepared surface of the walls and ceiling………..
159.55
-
14.65
... More
In Ground Floor ( water based cement putty (Both inside and out side))
Finishing wall surfaces with cement putty (water based) of approved quality for making smooth even to receive painting including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
785.09
-
64.21
... More
In First Floor ( water based cement putty (Both inside and out side))
Finishing wall surfaces with cement putty (water based) of approved quality for making smooth even to receive painting ………
698.02
-
65.48
... More
In Second Floor ( water based cement putty (Both inside and out side))
Finishing wall surfaces with cement putty (water based) of approved quality for making smooth even to receive painting ………
698.02
-
66.79
... More
In Third Floor ( water based cement putty (Both inside and out side))
Finishing wall surfaces with cement putty (water based) of approved quality for making smooth even to receive painting ………
159.55
-
68.14
... More
In Ground Floor (Two coats with distemper over a coat of primer)
Painting Two coats with distemper over a coat of primer to make an even finished surface in all floors and heights to wall surface of any approved quality to wall surface after cleaning surface including cost of materials, cost conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all floors as per direction of the Engineer-in-charge.
541.9
-
118.46
... More
In First Floor (Two coats with distemper over a coat of primer)
Painting Two coats with distemper over a coat of primer to make an even finished surface in all floors and heights to wall surface of any approved quality to wall surface………….
503.8
-
121.31
... More
In Second Floor (Two coats with distemper over a coat of primer)
Painting Two coats with distemper over a coat of primer to make an even finished surface in all floors and heights to wall surface of any approved quality to wall surface………….
503.8
-
124.24
... More
In Third Floor (Two coats with distemper over a coat of primer)
Painting Two coats with distemper over a coat of primer to make an even finished surface in all floors and heights to wall surface of any approved quality to wall surface………….
37.77
-
127.26
... More
In Ground Floor ( Painting two coat weather seal paint over a coat of primer) Painting two coat with approved weather seal paint of approved colour, shade on wall surface over a coat of wall primer including sand papering, polishing the surface, including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
243.19
-
126.32
... More
In First Floor ( Painting two coat weather seal paint over a coat of primer) Painting two coat with approved weather seal paint of approved colour, shade on wall surface over a coat of wall primer…………
194.22
-
130.2
... More
In Second Floor ( Painting two coat weather seal paint over a coat of primer) Painting two coat with approved weather seal paint of approved colour, shade on wall surface over a coat of wall primer…………
194.22
-
134.27
... More
In Third Floor ( Painting two coat weather seal paint over a coat of primer) Painting two coat with approved weather seal paint of approved colour, shade on wall surface over a coat of wall primer…………
121.78
-
142.97
... More
In Ground Floor (Two Coat of Enamel paints over a coat of primer)
Painting Two coats with any approved Enamel paints of approved colour, shade over a coat of primer over new iron work including sand papering, polishing the surface, cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
16.12
-
182.19
... More
In First Floor (Two Coat of Enamel paints over a coat of primer)
Painting Two coats with any approved Enamel paints of approved colour, shade over a coat of primer over new iron work ……………
9.12
-
186.59
... More
In Second Floor (Two Coat of Enamel paints over a coat of primer)
Painting Two coats with any approved Enamel paints of approved colour, shade over a coat of primer over new iron work ……………
9.12
-
191.11
... More
In Third Floor (Two Coat of Enamel paints over a coat of primer)
Painting Two coats with any approved Enamel paints of approved colour, shade over a coat of primer over new iron work ……………
1.62
-
195.77
... More
In Ground Floor (Two Coat of Enamel paints over a coat wood of primer)
Painting Two coats with any approved Enamel paints of approved colour, shade over a coat of primer over new wood work including sand papering, polishing the surface, cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
57.21
-
185.37
... More
In First Floor (Two Coat of Enamel paints over a coat wood of primer)
Painting Two coats with any approved Enamel paints of approved colour, shade over a coat of primer over new Wood work…………
57.21
-
189.76
... More
In Second Floor (Two Coat of Enamel paints over a coat wood of primer)
Painting Two coats with any approved Enamel paints of approved colour, shade over a coat of primer over new Wood work…..
57.21
-
194.28
... More
Int. PH Works
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor PVC pipes conforming to ASTM-D-1785/89 of the following nominal bore, tube fittings and clamps including making the wall good. ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.
a) 20mm dia PVC ASTM Pipe (Sch-80)
i) Ground Floor
20
-
108.8
... More
First Floor
20
-
114.2
... More
Second Floor
20
-
119.8
... More
b) 25mm dia PVC ASTM Pipe (Sch-80)
Ground Floor
60
-
143.6
... More
First Floor
25
-
149.2
... More
Second Floor
30
-
154.7
... More
32mm dia PVC ASTM Pipe (Sch-80)
30
-
187.3
... More
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
15mm dia CP angle stop cock (Jaquar make)
18
-
664.4
... More
15mm dia CP Long body bib cock (Jaquar make)
12
-
1033.5
... More
15mm dia CP Two way Bib cock (Jaquar make)
6
-
910.5
... More
20m dia CP concealed Stop cock (Jaquar make)
6
-
1033.5
... More
25mm dia brass full way valve (Shakti make)
4
-
922.6
... More
32mm dia brass full way valve (Shakti make)
2
-
1350.6
... More
25mm dia CP Health Faucet (Jaquar Make)
6
-
1058.1
... More
15mm CP Extension piece
42
-
59.3
... More
125mm CP grating
24
-
80.4
... More
15mm size C.P. flange
42
-
40.3
... More
Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width Fly ash Bricks in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 2000 liters capacity PVC water storage tank(Sintex Tripple Layer) (Roof of 2nd Floor)
3
-
32151.4
... More
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.
Ground Floor
4
-
41.71
... More
First Floor
4
-
42.41
... More
Second Floor
4
-
43.2
... More
Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge
Ground Floor
3
-
141.79
... More
First Floor
3
-
142.45
... More
Second Floor
3
-
143.2
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
Ground Floor
20
-
149.39
... More
First Floor
20
-
254.17
... More
Second Floor
20
-
159.58
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
60
-
379.3
... More
75mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
50
-
194.1
... More
100mm dia U-P.V.C. Pipe (Ori Plast/Finolex/Supreme Type A )
40
-
291.3
... More
110mm U-PVC ' P ' Trap(Ori Plast/Finolex/Supreme Make)
4
-
225
... More
110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
7
-
131.7
... More
110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
9
-
72.3
... More
110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
7
-
115.2
... More
110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
8
-
38.4
... More
75mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
5
-
30.7
... More
75mm U-PVC Door Bend(Ori Plast/Finolex/Supreme Make)
5
-
81.2
... More
75mm U-PVC Plain Bend(Ori Plast/Finolex/Supreme Make)
6
-
49.4
... More
110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
9
-
115.2
... More
110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make)
8
-
137.2
... More
110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
16
-
32.4
... More
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
European water closet with 'p' trap plain(Hindware/Parryware/Neycer make)
6
-
2534.5
... More
Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
6
-
1519.7
... More
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with Pedestal
12
-
3861.5
... More
Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink
6
-
4858.1
... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge25mmx600mm long CP towel rail
6
-
684.3
... More
Towel ring
12
-
451.5
... More
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
CP soap holder
6
-
167.6
... More
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.
600mmx125mm plate glass shelf with CP/NP guard rails.
12
-
577.9
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
600mmx450mm size B.E mirror (swivelled type)
12
-
609.2
... More
Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge. ½” x 5” CP Shower (Plaza Deluxe Make)
6
-
475.9
... More
Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
6
-
162.47
... More
Supplying all materials, labour, T&P and cutting of R.C.C roof or cornice for taking H.C.I pipes and making good the damages etc all complete as per P.H.Specification and direction of the Engineer in charge.
4
-
142.78
... More
Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site.
0.77
-
289.47
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 40mm size crusher broken hard black granite metal including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
0.77
-
3992.25
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
Ground Floor
0.51
-
5254.26
... More
First Floor
0.51
-
5528.3
... More
Second Floor
0.51
-
5843.44
... More
Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 30cmx30cm special printed series to be pre-approved by the Engineer-in-charge )
Ceramic tile 30cmx30cm Ground Floor ------------ Toilet:- - 2 X 1.32m X 1.95m=
5.15
-
1036.32
... More
First Floor --------- Toilet:- - 2 X 1.32m X 1.95m=
5.15
-
1045.4
... More
Second Floor --------- Toilet:- - 2 X 1.32m X 1.95m=
5.15
-
1055.31
... More
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
Ground Floor
24.31
-
141.54
... More
First Floor
24.31
-
146.65
... More
Second Floor
24.31
-
152.01
... More
Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 30cmx45cm special plain / printed series to be pre-approved by the Engineer-in-charge )
Glazed tile 30cmx45cm Ground Floor- Toilet:- - 2 X 2(1.32m + 1.95m) X 2.10m= 27.46
Deduction:- Door:- -2 X 0.75m X 2.10m= (-) 3.15
24.31
-
1072.62
... More
First Floor
Toilet:- 2 X 2(1.32m + 1.95m) X 2.10m= 27.46
Deduction:- Door:- 2 X 0.75m X 2.10m= (-) 3.15
24.31
-
1086.26
... More
Second Floor
Toilet:- 2 X 2(1.32m + 1.95m) X 2.10m= 27.46
Deduction:- Door:- 2 X 0.75m X 2.10m= (-) 3.15
24.31
-
1100.6
... More
Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated two GRP skins with wood grain finish fabricated using UV-stabilised isothermal Gelcoat and one layer of 450 gsm E-glass chopped standard mat (CSM) impregnated with orthopthalic polyester resin. The thickness of the skins shall not be less that 1.50mm expanded polyestyrone(EPS) structural foam panel of 29 mm thickness and a density of 20Kg/cu.mtr shall be used as core material .Wooden reinforcements made of seasoned sal wood reinforcements for fitting the metal fittings such as tower bolts ,aldrops,handles etc. shall be provided .A Strictira; adhesive compatible with(EPS) foam shall be used for bending the core material,the sal wood reinforcements and the skins.The materials and process for manufacturing the door shutters shall conform to RC-TIFAC composites Design centre's standards and specifications and the door shutters tested in conformation to IS:40250-1998.The finish of door shutter will be plain colour white/Lvory/beige/Light grey/Mahogany/Teak wood of any other colour using high quality pigments .Three heavy weight mild steel butt hinges type l(ISI-marked) size 100 mm are to be fitted on one side of shutter. 1X6X0.75x2.1=
9.45
-
3200
... More
Factory made FRP (alternately called GRP) door frame of sixe75mmX100 mm fabricated using E-Glass chopped strand Mat(CSM) U.V stabilised inopthalic Gelcoat and impregnated with inopthalic resin.The thickness of the GRP sikns shall no be less that 2.00 mm .The door frame consist of foru segments which are provided with plug-in-socket arrangement in-site in the ,ould .The segments are plugged in and are joined together by means of screw . The GRP frame shall be provided with wooedn rainforcement of six locations for high screw holding capacity for fixing metallic hold fast and shall be consolidated by filling with medium destity foam/Plaster of paris with fibre reinforcement,Six numbers of 260mm X 25mm X 5 mm size 'S' shaped M.S flat hold fast shall be provided with the frame .The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design centre's stanards and specifications.The finish of door rrame will be plain colour white/Lvory/Beige/Light grey Golden brown Mahogany/Teak wood sand stone/Champagne /Pastel blue or any other colour using high quality pigments cimplete in all respect as per specification and direction of the Engineer in Charge.
29.7
-
572.4
... More
Ext P.H.
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge.
110mm dia P.V.C. pipe
25
-
779.5
... More
Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge
4
-
1123.9
... More
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , Fly ash Bricks in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge
Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
5
-
8381.1
... More
Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover )
3
-
16552.2
... More
Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
2
-
18817.8
... More
1 nos 50 Users Septic tank (Internal Size 5.0mX 2.0mX2.1m)
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.1 x5.90m x 3.30m x 1.50m=
29.2
-
167.81
... More
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft.1 x 5.90m x 3.30m x 1.00m=
19.47
-
178.48
... More
Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.
33
-
111.87
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charger 1 x 5.90m x 3.30m x 0.225m=
4.38
-
5254.26
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.1 x 4.75m x 2.15m x 0.15m=
3.06
-
5838.41
... More
Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
1.55
-
6268.74
... More
Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge
RCC floor, roof slab chhaja up to 4.430 m height
1x 4.00x 1.40 = 5.60
1x2(4.75+2.15)x0.15 = 2.07
7.67
-
699.35
... More
Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:4 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge.
L.W. = 1X2 X 5.00 X 1.50 X 0.50 = 7.50
S.W. = 1X 2 x 1.40 x 1.50 x o.50 = 2.10
L.W. =1 X 2 X 4.75 X 1.20 X 0.375 = 4.28
S.W. =1X 2 x 1.40 x 1.20 x 0.375 = 1.26
Partion wall 1 X 1.40 x 0.25 x 2.00 = 0.76 total = 15.84
15.84
-
4071.34
... More
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
in side 1X 2(4.00+1.40) x 2.70 = 29.16
Bottom 1X 4.00 x 1.40 = 5.60 total = 34.76
34.76
-
141.54
... More
Supplying all materials labour T&P and providing 12mm thick C.P (1:6) including watering curing and conveyance of all materials to site.(out side)
1X2(5.00+2.40) x 1.50 = 22.20
1X2(4.75+2.15) x 1.20 = 16.56
1X2(5.00+2.40) x 0.125 = 1.85
top 1X4.75 x 2.15 = 16.21 Total = 56.82
56.82
-
124.73
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge.same as plastering
34.76
-
28.94
... More
Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification.
8
-
165.6
... More
Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge.
4
-
284.6
... More
Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge. 1x 5.90 x 3,30 x 0.30 =
5.84
-
289.47
... More
Construction of 1nos production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only.
a) Drilling of 200mm dia bore
i) 00 mtr to 30mtr
30
-
755.48
... More
30 mtr to 45mtr
15
-
836.28
... More
b) Drilling of 150mm dia bore
45 mtr to 165 mtrs
120
-
554.49
... More
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
Lowering of 200mm dia P.V.C casing pipes
00 mtr to 30 mtrs
30
-
138.2
... More
30 mtr to 60mtr
15
-
138.2
... More
Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.
200mm dia PVC (sch-80) pipe
45
-
1633.8
... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
By DTH Rig
1
-
4994.8
... More
Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation:
Rocky terrain with boulder formation for 300m depth
2
-
1122.11
... More
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make) 1 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby)
1
-
16737.2
... More
DOL Control panel
1
-
3805.5
... More
40mm dia steel short piece
1
-
152.3
... More
Well cap
1
-
152.3
... More
50mm size CI bracket
1
-
91.3
... More
2.50sqmm flat cable
120
-
128.1
... More
20mm dia rigid UPVC pipes
60
-
6.9
... More
Steel rope with cover
60
-
26.7
... More
Labour charges for lowering including transportation
1
-
2000
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge
32mm HDPE pipes (Finolex/Supreme make)
83
-
99.8
... More
E.I. WORKS
Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with S.P 5/6Amp, one way modular switch ISI marked(L&T/crabtree/ Havells/ ROMA/ SIEMENS/ Finolex) and ceiling rose ISI marked mounted on Modular GI box of 18SWG having modular base & cover of suitable size with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard ) Group-A. L.P.-17 F.P.- C.B.- Part-A
17
-
596.91
... More
Group-B. L.P.- 18 F.P.-05 C.B.- Part-A
23
-
735.28
... More
Group-C L.P.- 07 F.P.-05 C.B.-02 Part-A
14
-
1020.1
... More
Group-A. L.P.-10 F.P.- C.B.- Part-B
14
-
596.91
... More
Group-B. L.P.-22 F.P.-05 C.B.- Part-B
38
-
735.28
... More
Group-C L.P.- 16 F.P.-06 C.B.- Part-B
28
-
1020.1
... More
Recessed wiring for 5/6Amp modular Socket outlet with 2x1.5mm2 FR PVC insualted single core multistand copper conductor of ISI marked in recess 20mm dia Non-metalic PVC flexible conduit with piano type switch,phenolic laminated sheet suitable size ISI marked on modular GI box and earthing point with 1x1.5sqmm FR PVC insulated single core multistand copper conductor for loap earthing etc.as required(make of wire-Finolex/L&T/Anchor/ Havels/V-Guard) Grnd Floor
4
-
554
... More
On Existing board. Grnd Floor
8
-
214
... More
Group-A. Part-B
8
-
554
... More
On Existing board. Part-B
16
-
214
... More
Recessed submain wiring along with earth wire with the following sizes of PVC insualted single core multistand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non-metalic heavy duty flexible conduit 1.6mm in recess PVC conduit as required(make of wire-Finolex/L&T/ Anchor/ Havels/V.Guard) a)1x1.5mm2(1.19.2.SOR-17) Inverter wiring Part-A
126
-
33.33
... More
b)2x2.5mm2+1x1.5mm2(1.8.2.SOR-17) Part-A
216
-
113.12
... More
c)2x4mm2+1x1.5mm2 (1.8.3.SOR-17) Part-A
92
-
130.29
... More
e)2x6mm2+ 1x2.5mm2(1.8.11.SOR-17) Part-A
48
-
161.6
... More
a)1x1.5mm2(1.19.2.SOR-17) Inverter wiring Part-B
184
-
33.33
... More
b)2x2.5mm2+1x1.5mm2(1.8.2.SOR-17) Part-B
372
-
113.12
... More
c)2x4mm2+1x1.5mm2 (1.8.3.SOR-17) Part-B
180
-
130.29
... More
d)2x6mm2+ 1x2.5mm2(1.8.11.SOR-17) Part-B
96
-
161.6
... More
Supplying and fixing Modular G.l. box of 18 SWG on surface or in recess with Modular base & cover for module in front including providing and fixing 6pin 15/16Amp modular socket outlet and SP 15/16Amp oneway modular switch (Power Plug) with indicator connection, painting etc as required. PArt-A
6
-
590
... More
Part-B
12
-
590
... More
Supplying and fixing of stepped type modular regulator of ISI marked(ROMA/Crabtree/L&T/ Legrand) on Modular G.l. box of 18 SWG on surface or in recess with suitable size Modular base & cover module in front including providing and fixing connection, painting etc as required.(For light plugs to be used in non residential buildings) Part-A
6
-
430
... More
Part-B
12
-
430
... More
S/F of 20W/18W LED batten light of Crompton/Havells make. Part-A
16
-
677
... More
Part-B
32
-
677
... More
S/F.of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of Ceiling rose. Part-A
8
-
2.68
... More
Part-B
16
-
2.68
... More
S/F of 9W/10W LED lamp of havells/Crompton Part-A
8
-
157
... More
Part-B
16
-
157
... More
S/F of B.H fitting energy saving,surface mounted decorative round plastic bulk head 1x10Wt LED luminaires comprising high brightness LED with IP54 protection.Havells Make.(ELIPSE ROUND/ ELIPSE OVAL/Rugby) as per direction of Engineer-in-charge.
4
-
1545
... More
Part-B
4
-
1545
... More
Supplying and fixing of Modular G.l. box of 18 SWG on surface or in recess with suitable size Modular base & cover module in front including providing and fixing of Modular Bulbul Callbell of ROMA or Equivalent make with connection, painting etc as required.
2
-
471
... More
Part-B
4
-
471
... More
S/F of 20AMP 240V SPN Industrial type socket outlet with two pole and earth metal enclosed top along with 20amp "C" series SP MCB in sheet steel enclosedn on surface or in recess with chained metal cover for the circuit oulet and complete connection as per direction of Engineer-in-charge.
2
-
545.4
... More
Part-B
4
-
545.4
... More
Supplying and fixing of Modular G.l. box for suitable module on surface or in recess with Modular base & cover and blanking plate ( if required) in front including providing and fixing of 25AMP DOL starter (ROMA/ Crabtree/Havells make) of modular type switch, connection, painting etc as required as per the direction of Engineer-in-Charge.
2
-
636
... More
Part-B
4
-
636
... More
S/F.of 48"A.C.Ceiling fans complete with ISI marked (Usha Ergo/Usha vetra plus/ /Bajaj-Elegance (Ivory)/ crompton Aura plus(ivory) make including all accessories & connection as per direction of Engineer-in-charge. Part-A
6
-
2384
... More
Part-B
12
-
2384
... More
S/F of 300mm metal exhaust fan with wall cutting masonary work including all accessories of USHA(Jet Dix)/ Bajaj (Bahar)/ Crompton make & connection as per direction of Engineer-in-charge. Part-A
4
-
1795
... More
Part-B
8
-
1795
... More
S/F 1x45W 5700K LED street light made up of pressure die cast housing with toughned glassindividual high powered LEDs with secondary optics ,IP66 protection Havells make(ENDURA PEARL PLUS )/Crompton NEXUS+ as per direction of Engineer in charge. Part-A
6
-
6127
... More
S/F of 12 way Double door D. Box (Hager/L&T/Havells) with 40Amp TP,9x(6-32Amp)SP MCB of Hager/L&T/ Legrand make including all accessories and connection. as per direction Engineer-in-Charge. Part-A
2
-
6348
... More
Part-B
4
-
6348
... More
Supply, Installation, Testing, and Commissioning of 63 Amp DP Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. as required as per direction of Engineer in Charge.Make-SEIMENS/ HPL/ ANCHOR/ L&T/HAVELS/C & S/ RK Part-A
2
-
1351
... More
Part-B
4
-
1351
... More
S/F of 1x15W surface celing LED light made up of pressure die cast housing with secondary optics ,IP66 protection with fixing on ceiling of Havells make(ENDURA NEO DL SURFACE) or Equivalent of Crompton/Philips.as per direction of Engineer-in-charge.(For portico)
2
-
2089
... More
S/F.of Computer board consisting of 2Nos 5/6AMP modular socket & modular switch including suitable size of GI modular box and modular base &cover (ROMA/ Crabtree/ Havells/L&T)complete with connection as per the direction of Engineer-in-Charge. Part-A
6
-
991
... More
Part-B
12
-
991
... More
6 sq.mm 2 Core Alluminium, armoured LT power Cable With G.I Stay Wire of XLPE insulated 650/1100 grade(make-Havells/Polycab) Part-A
100
-
60
... More
Part-B
200
-
60
... More
S/F.of Special earthing complete with provision of 600x600x3mmthick or (2ft x 2ft) copper plate, 38/40mm dia 3mtr long G.I.pipe , 25x3mm thick Cu.flat charcoal and salt,funel,earthpit chamber with masonary work including all accessories and connection as per direction of Engineer-in-charge. Part-A
1
-
12325.42
... More
Supply and laying of 25mmx5mm copper strip on surface or in recess for connection etc as required.(Connection to be made from special earth electrode to Main panel )as per direction of Engineer-in-charge. Part-A
10
-
491.87
... More
S/f.of Standard earthing with G.I.earth pipe(With charcoal and salt) (Sl.No.3.2.of SOR-2017) as per direction of Engineer-in-charge. Part-A
1
-
2145.24
... More
P/F of 6 SWG G.I. wire on surface or in recess for loop earthing along with existing surface/recessed conduit/ submain wiring/cable as required( Part-A
30
-
15.15
... More
Part-B
80
-
15.15
... More
S/F of 1 phase KWh meter of 1-30Amp with LCD display with optical port and box of L&T make.
2
-
2465
... More
Part-B
4
-
2465
... More
Supply and instalaltion of Metering Unit panel Board of size 36"x24"x12' with 40Amp C series DP MCB of (Legrand/ L&T/Hager)make-6Nos. With channels for fitting ,fixing for Digital meter within it. Part-A
1
-
17630.5
... More
Service connection charges for single phase supply to 2 nos. of qtr Part-A
1
-
2000
... More
Service connection charges for single phase supply to 4 nos. of qtr Part-B
1
-
4000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements