Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 67,242Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_EICCL_106736_1Tender No
SE GTN R AND B 15-2024-25Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Drain
17.46
270
4729.91
Compound Wall
40.84
270
11063.56
Supplying Filling foundation and plinth (F&P) with sand well watered and rammed including all cost and complete finished in all respect as per direction of the Engineer-in-charge.
-
-
-
Ground Floor
78.61
1064
83696.07
Drain
3.49
1064
3715.8
Compound Wall
4.53
1064
4823.09
Cement concrete (1:3:6) with 4cm HG crusher broken metal in foundation and plinth including all cost and complete as per direction of the Engineer-in-charge.
-
-
-
Ground Floor
46.11
6769
312160.09
Cement concrete (1:2:4) with 4cm HG crusher broken metal in foundation and plinth including all cost and complete as per direction of the Engineer-in-charge.
-
-
-
Ground Floor
4
8303
33214
Diluting and injecting chemical emulsion for PRE CONSTRUCTIONAL Anti-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (plinth area of the building at ground floor only shall be measured for payment).
-
-
-
Ground Floor
118.04
104
12335.18
Brickwork with Fly Ash Bricks 25cmx12cmx9cm having crushing not less than 35kg/cm² in C.M (1:6) in Foundation and Plinth including cost of all and complete finished in all respect.
-
-
-
Ground Floor
35.48
5550
196924.64
Brick work with Fly ash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:4) in Foundation and Plinth including watering curing, cost of carriage and royalty of all materials, cost of all labour, etc complete. (Ref.:-A/R-2006,P-71, Item no-2)
-
-
-
First Floor
7.31
6184
45205.04
Brickwork with Fly Ash Bricks 23cmx11cmx8cm having crushing not less than 35kg/cm² in C.M (1:6) in Superstructure including cost of all and complete finished in all respect.
-
-
-
Ground Floor
51.15
5588
285856.89
Terrace Floor
6.45
6385
41188.41
Brickwork with Fly Ash Bricks 23cmx11cmx8cm having crushing not less than 35kg/cm² in C.M (1:6) in Superstructure including cost of all and complete finished in all respect.
-
-
-
First Floor
32.18
5959
191773.49
Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.
-
-
-
RCC Footing
-
-
-
Ground Floor
17.32
7633
132205.29
Compound Wall
5.04
7633
38470.82
RCC Plinth Beam
-
-
-
Ground Floor
6.85
8499
58220.89
RCC Column in Super Structure
-
-
-
Ground Floor
3.68
16776
61736.05
First Floor
3.68
18798
69178.85
Terrace Floor
0.62
21219
13156.15
RCC Wall Beam
-
-
-
Ground Floor
6.35
16776
106528.24
First Floor
6.35
18798
119371.11
Terrace Floor
0.8
21219
16975.68
RCC Lintel
-
-
-
Ground Floor
1.34
15246
20429.91
First Floor
1.34
16962
22730.02
Terrace Floor
0.16
19016
3042.62
RCC Chajja
-
-
-
Ground Floor
17.8
1302
23184.5
First Floor
15.57
1476
22987.55
Terrace Floor
1.86
1684
3133.54
RCC Roof Slab
-
-
-
Ground Floor
13.82
14811
204700.46
First Floor
13.82
16441
227221.53
Terrace Floor
0.74
18391
13609.41
RCC Stair case
-
-
-
Ground Floor
1.1
16651
18316.76
First Floor
1.28
18649
23870.98
Drain Bottom slab
2.8
7633
21372.68
Drain wall
3.3
16776
55361.13
slab
2.3
14811
34067.37
Column up to plinth compound wall
0.68
16776
11407.75
Tie Beam :-compound wall
2.25
8499
19123.65
Column up to 1.88m lvl :- compound wall
1.5
16776
25164.15
Coping at top of compound wall
0.9
16776
15098.49
Cutting, straightening coiled or bent up M.S. Rod or tor steel of SAIL/ TATA / RINL (VIZAG) make including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Linear measurement will be taken and quantity will be calculated basing on the standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including weight of binding wire will not be considered for measurement) etc. complete as per specification & direction of Engineer-in-charge.
-
-
-
Ground Floor
52.49
8788
461329.36
First Floor
28.38
8821
250359.85
Terrace Floor
2.34
8856
20723.27
Drain
6.47
8788
56864.18
Compound wall
8.21
8788
72156.87
Providing 16mm thick cement plaster (1:6) finished smooth to in side surface of 9" thick brick walls after out the joint including watering and curing for 7 days with cost,conveyance, royalities and taxes of all materials and labour with T&P required for the work etc. complete in all respect in all floors.
-
-
-
Ground Floor
284.83
276
78698.53
First Floor
227.12
283
64297.67
Terrace Floor
28.99
290
8412.9
Compound wall
61.4
276
16964.82
Providing 12 mm thick Cement Plaster in (1:6) over brick work including cost, conveyance,royalities and taxes of all materials and labour with T&P required for the work etc.complete.
-
-
-
Ground Floor
253.07
192
48715.98
First Floor
235.4
200
47103.54
Terrace Floor
28.99
208
6032.82
Compound wall
60
192
11550
6 mm cement plaster on RCC surfaces at ceiling/slab soffit and other locations with cement mortar of mix 1:4 (1 cement : 4 coarse sand) including necessary scaffolding, curing etc. all complete at all floors and all heights.
-
-
-
Ground Floor
111.74
212
23700.05
First Floor
95.95
217
20859.53
Terrace Floor
7.37
223
1643.51
Compound wall
22.5
212
4772.25
Supplying, fitting & fixing of 8-10 mm thick & size of 600x600 mm Industrial mat vertified floor tile of with veilcraft (VC/FT ) shield( Scratch free/stain free) with water absorption limit between 0.08% to 3% and conforming to IS : 15622:2006 (Group B Ib). laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge (for New Work only )
-
-
-
Ground Floor
97.49
1143
111450.57
First Floor
95.95
1156
110956.58
Supplying, fitting & fixing of 8-10 mm thick and size of 600x600 mm Polished Glazed vertified wall tile of in dadoes, skirting and risers of steps of laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge.
-
-
-
Ground Floor
15.05
1039
15647.49
First Floor
15.72
1059
16656.91
Supplying, fitting & fixing of 8-10 mm thick & size of 300x300 mm Industrial vertified floor tiles in floors of approved make laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge
-
-
-
Ground Floor
28.91
1036
29956.54
Finishing wall surface with Cement based wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labour etc. complete.
-
-
-
Ground Floor
627.22
83
52623.76
First Floor
542.75
83
45536.73
Tarrace Floor
65.35
83
5482.87
Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in-charge.
-
-
-
Ground Floor
627.22
39
24649.75
First Floor
542.75
39
21655.73
Tarrace Floor
65.35
40
2653.21
Compound wall
142.8
39
5612.04
Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint etc complete.
-
-
-
Ground Floor
461.58
106
49204.43
First Floor
403.61
108
43912.77
Tarrace Floor
38.1
111
4229.1
Finishing walls with weather coat of approved shade on new work two coats to give an even shade including cost of all and complete.
-
-
-
Ground Floor (Out side)
143.8
99
14322.48
First Floor
123.53
103
12748.3
Tarrace Floor
25.57
107
2735.99
Painting two coats with approved anti-fungal weather seal paints (ISI) of approved colour, shade on wall surface over a coat of wall primer(ISI) water bound including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labour,labour cess with T&P etc, complete as per specification & direction of Engineer-in-charge. (Compound Wall)
142.8
99
14222.88
Providing and fixing factory made 2 track 2 panel KOMMERLING uPVC white colour sliding window comprising of uPVC multi-chambered frame having section Frame 58mm x 49mm, Window sash: 37mm x 61mm, made out of lead free green profiles with corners fusion welded, fully reinforced with Galvanized steel 1.5/2.0 mm. The windows profile should fulfill the requirements of Viny 2010. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The window comprising of uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size. The sash will be fitted with 5mm clear glass ( float ).complete in all respect as per specification and direction of the Engineer in Charge. etc. complete
-
-
-
Ground Floor
17.84
8900
158776
First Floor
15.61
8900
138929
Tarrace Floor
1.67
8900
14863
Supplying and Fixing of M.S. Grills, M.S.Doors, M.S. Gate etc including cost,conveyance of all materials,priming,and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge
-
-
-
Ground Floor
474.46
64
30555.22
First Floor
415.15
64
26735.66
Tarrace Floor
105.02
64
6763.29
Painting two coats with approved Enamel Paint on Steel work
-
-
-
Ground Floor
17.84
185
3314.67
First Floor
15.61
190
2973.71
Tarrace Floor
3.95
195
771.44
Painting two coats with approved Enamel Paint on wood work over a coat of Wood Primer
-
-
-
Ground Floor
9.46
265
2508.79
First Floor
6.55
271
1780.95
Providing & Fixinng factory made 100% Solid WPC ( Wood Polymer Composite ) - Door Frame 125 mm x 65 mm Single Rebated, made from Wood Polymer Composite ( Single Extruded Process ) material comparising of virgin PVC polymer of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and Natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic additives fabricated with meter Joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/ cbm & an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of ( Min. 990 N ), Minimum Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof , water / Moisture Proof & Fire retardant & Fixed in position with SS Dash Fasteners / Hold Fast of reuired dia and lenght, , all as per specifications drawings as directed by the Engineer-In-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company.
-
-
-
Ground Floor
37.4
1607
60109.28
First Floor
25.91
1607
41642.55
Factory made 30mm/32mm flush door shutter (Laminates both side of frame) with all labour, iron fittings, and wooden hinged cleats etc fitted and fixed complete in all respect
-
-
-
Ground Floor
14.03
10668
149680.6
First Floor
8.09
10668
86309.05
Supplying, fitting, fixing of stainless steel of 304 grade in Hand Railing using 50mm dia. Of 2mm thick circular pipe with balustrade of size 32mmx32mmx2mm @ 0.90m c/c and stainless square pipe braceng of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification , buffing ,polishing etc. with cost conveyance taxes of all materials , labour , T&P required for completion of the work in all reapect as per the direction of the Engineer- in - charge.
-
-
-
Ground Floor
167.01
342
57217.63
First Floor
54.27
342
18592.9
Providing fixing granite on steps and landing on 25 mm thick bed in cement mortar 1:1 jointed with neat cement slurry with pigment to match the shade of tiles including rubbing and polishing but including cost of tiles
-
-
-
Ground Floor
13.01
1916
24936.27
First Floor
10.44
1929
20148.16
Providing 20mm thick grading plaster using cement plaster (1:4) on roof slab cost, carriage, royality taxes and all labour involved for the completion of item of work as per direction of EIC.
-
-
-
First Floor
118.04
439
51902.19
Tarrace Floor
7.37
484
3569.29
Filling at all depth with available excavated earth (excluding rock) in Drain sides in layers not exceeding 12 cm in depth: consolidating each deposited layer by ramming and watering complete all as per the directed of the Engineer-In-charge.
11.7
150
1760.85
Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand : 8 stone agregate 40mm nominal size) as levelling course in Drain etc. including tempering, curring, shuttering etc. complete all depth and height as per the direction of Engineer-In-charge.
6.51
6379
41531.2
Filling at all depth with available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 15cm in depth: consolidating each deposited layer by ramming and watering complete (lead upto 100m) as directed by the Engineer-In-charge. (Compound Wall)
27.36
150
4117.68
Fly Ash. brick masonry of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with approved grade cement and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in foundation & plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge. (Compound Wall)
2.25
5550
12488.18
Fly Ash. brick masonry of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with approved grade cement and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge. (Compound Wall)
13.8
5588
77122.68
E.I. Works
-
-
-
Recessed wiring to light point/fan point/Exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated single core multi strand copper conductor of ISI marked with 20mm dia non-matalic PVC flexible conduit with 5 Amp,250 V Modular type switch ISI marked and ceiling rose ISI marked mounted on metal box having front Modular cover of suitable size,metal box with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all ccesories and connection as per direction of Engineer in Charge (Make of wire Finolex /Polycab/ Anchor / Havels/Eq.
-
-
-
Group-A
27
619
16713
Group-B
32
912
29184
Group-C
25
1285
32125
Point wiring for 6 Amp socket outlet with 2x1.5 sq.mm FRLSH PVC insulated single core multi strand copper conductor of ISI marked in recess 20 mm dia non metalic PVC flexible conduit with Modular type switch ISI marked mounted on a metal box having front modular cover of suitable size and earthing point with 1x1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor for for loop earting etc. as required(Make of wire Finolex /Polycab/ Anchor / Havels/Eq)
-
-
-
Separate point
5
766
3830
On existing switch board
16
243
3888
Wiring for twin control light point with 1.5 sq.mm FRLSH insulated single core multistrand copper conductoe of ISI marked in recess PVC conduit with 2 way Modular type switch with ISI marked ,Modular base & cover of suitable size ISI marked GI Modular box(18 SWG) and earthing point with 1.5 sq.mm FRLSH insulated single core multistrand copper conductor for loop earthing etc. as required.( Make of wire-Finolex/Hacells/L&T/Anchor/V Guard/Polycab/Eqivt.)
2
994
1988
Supply and Fixing of Modular Metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of of 16 Amp socket outlet and 16 Amp Modular switches connection.(Make-Legrand/Schnider/Havells/Crabtree/Eqiv)
6
668
4008
S/F of computer board having 3 nos. 6 Amp modular switch and 3 nos. 6 Amp modular socket outlet.
3
991
2973
Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of Modular 25A Single Phase Starter and 15Amp Modular Socket for AC Point including all connection (Anchor Roma/ L&T/ Crabtree/Legrand/Equivalent)
3
1044
3132
Supply ,Installation,Testing,and Commissioning of DP main Switch of following capacity(IS 13940 part 3/1993) on existing surface/wall mounting and complete with HRC fuse link,interconnection,earthing,etc. as required as per direction of Engineer in Charge.Make-Seimens/Hpl/Anchor/L&T/Havels/C&S/RK.
-
-
-
63 Amp ICDP Main Switch
1
2110
2110
Recessed wiring to submain in the following sq.mm FR LSH insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in the following mm dia non matalic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required. (Make of wire-Finolex /L&T/ Anchor /Havells/V-Guard /HPL / Equivalent).
-
-
-
2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia
80
157
12560
2x2.5 sq.mm+1x1.5 sq.mm in 20 mm dia
365
171
62415
2x4 sq.mm+1x1.5 sq.mm in 20 mm dia
160
188
30080
2x6 sq.mm+1x2.5 sq.mm in 25 mm dia
80
220
17600
S/F of following way single pole and neutral sheet steel MCBdistribution board 250 V recess complete with tinned copper bus bar,neutral bus bar,earth bar,din bar,detachable gland plate,interconnections,phosphatised and power painted including earthing earthing etc. as required (but with out MCB/RCCB/Isolator)Make-Havells/HPL/Legrand/L&T/C&S.
-
-
-
12 WAY,DOUBLE DOOR
2
1962
3924
S/F of 5 Amp to 32 Amp rating 240 V/415 V "B/C" series MCB suitable for lighing and other loads of the following poles in the existing MCB DB ISI marked complete with connections ,testing and commisioning etc.(Make-HPL/Havells/Legrand/L&T/C&S)
-
-
-
Single pole(SP)(6/10 Amp)
18
144
2592
Double pole(DP)(25 Amp/32 Amp)
7
345
2415
S/F of 1200 mm 5 star 26-28 watt ceiling fan (Make Havells efficiencia Neo /Bajaj/CG/Equiv.)
15
4265
63975
S/F of two moudule steped type electronic fan regulator on the existing plate switch box including connection but excluding modular plates etc. as required.(Make-Havells/Crabtree/Legrand/Schnider/Panasonic/Eqivt.)
15
404
6060
Providing and fixing extra down rod of 20 cm length G.I. pipe 20 mm dia heavy gauge including painting etc as required. (1.35+1.39)
15
85
1275
Installation, Testing and commissioning of ceiling fan including wiring the down rod of standard length with 1.5 sq.mm FR PVC insulated single core multistand copper conductor etc. as required.
15
163
2445
S/F of 300 mm exhaust fan(Make-Usha/Bajaj/Havels/Equivalent)
6
1816
10896
Installation, Testing and commissioning of exhaust fan up to 450 mm sweep in the existing opening including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required.
6
826
4956
Supply and fixing of 20 Watt LED recessed light fittings.(Make-Havells /Jaquar /Equivalent brand of Philips/Wipro/Panasonic)
14
1450
20300
S/F of call bell/buzzer ISI marked suitable for DC/AC single phase 230 v complete as required.
2
137
274
S/F of B.K.Angle holder of ISI marked including connection as reqired.
9
75
675
S/F of 9/10 watt LED bulb of philips/Bajaj/Havels/Crompton Grieves make.
9
162
1458
S/F of 18 Watt LED Tube light fitting of Philips/Bajaj/Havels /Crompton Grieves make.
31
547
16957
S/F of 25 watt GATE LED light of make havellsRUBYPT25WLED830SSYMTOPC/Equivalent.
2
7712
15424
S/F of 48 watt LED Street light(Make-philips/Bajaj/Havels/Crompton Grieves)
5
6321
31605
S/F of G.I. Bend for street light.
5
480
2400
supply and drawing of 1x1.5 sq.mm FR PVC insulated single core multistrand copper coductor to all switch board in exixting PVC conduit for inverter connction.
160
58
9280
Supply and fixing of Earthing with G.I earth pipe 3 mtr.long 40 mm dia ISI marked including accessories and proving masonary enclosure with cover plate having locking arrangement and watering pipe etc. With charcoal and salt as required.
2
2786
5572
Supplying and laying of 6 SWG GI wires ISI marked at 0.5 mtr below ground level for conductor earth electrode including soldering etc. as required.
30
18
540
S/f 2.5 sq mm 3 core copper cable (for gate light)(Make Havells /Polycab/Equiv.)
40
149
5960
Laying of one number of PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq. mm direct in ground including excavation,sand crushing protective covering and refilling the trenchetc. As required.
35
154
5390
ISI marked portable fire extinguisher, 4.5 k.g CO2 type fire extinguisher complete in all respect including intial fill and wall wall suspension bracket & shall conform to latest IS 15683
2
7232
14464
Lightning Protection
-
-
-
Provision of lightning arrestor with 85 mm dia 3 mm thick copper base plate and copper tape 20x3 mm thick including all accesories.
2
4900
9800
P/F of G.I. tape 20mmx3mm thick on parapet or surface of wall for lightning conductor complete as required. (Horizontal Run).
60
70
4200
P/F of G.I. tape 20mmx3mm thick on parapet or surface of wall for lightning conductor complete as required.(Vertical Run).
10
118
1180
Earthing with G.I. Earth plate 600 mmx600mmx6mm thick ISI marked including accessories and providing masonary with cover plate having locking arrangement and waterning pipe etc with charcoal and salt as required(3.4+3.3).
1
3342
3342
Power Backup
-
-
-
Supply, Installation, testing & commissioning of inverter of rating 1050VA, 12 V .(Make-Luminous/Livguard/V-Guard/Microtek)
1
8550
8550
Supply ,installation and testing of 220 AH,12 V tall Tubular battery.(Make-Luminous/Livguard/V-Guard/Microtek)
1
20621
20621
Int. PH. Works
-
-
-
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.
-
-
-
20mm dia ASTM(Sch-80)PVC pipe
-
-
-
In Ground floor
15
175
2632.5
In First floor
10
183
1838
25mm dia ASTM(Sch-80)PVC pipe
-
-
-
In Ground floor
20
244
4896
In First floor
15
253
3796.5
32mm dia ASTM(Sch-80)PVC pipe
-
-
-
In Ground floor
25
322
8052.5
In First floor
20
332
6652
40mm dia ASTM(Sch-80)PVC pipe
-
-
-
In Terrace floor
10
450
4502
50mm dia ASTM(Sch-80)PVC pipe
-
-
-
In Terrace floor
10
558
5587
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.
-
-
-
250mm thick wall
-
-
-
In Ground floor
2
61
123.6
In First floor
2
63
126
In terrace floor
4
64
256.8
Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge
-
-
-
In Ground floor
2
211
423
In First floor
2
212
425
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
-
-
-
In Ground floor
15
212
3181.5
In First floor
10
219
2190
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
15mm dia CP Angle stop cock (Jaquar Make)
8
1552
12420
15mm dia CP Long body bib cock (Jaquar Make)
7
1840
12880
15mm dia CP two way bib cock (Jaquar Make)
2
1133
2266
15mm dia CP Health faucet (Jaquar Make)
2
1742
3484.6
15mm dia CP concealed stop cock (Jaquar Make)
4
1179
4717.6
15mm dia CP Swan neck pillar cock (Jaquar Make)
4
1300
5200
25mm dia brass full way valve (Shakti make)
4
1199
4796.8
32mm dia brass full way valve (Shakti make)
4
1755
7020.4
40mm dia brass full way valve (Shakti make)
2
2233
4466.6
50mm dia brass full way valve (Shakti make)
2
3315
6630.8
15mm CP Extension piece
22
77
1702.8
125mm size C.P. Gratting
10
79
791
15mm CP flange
22
52
1157.2
Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.
-
-
-
½” x 5” CP Shower (Plaza Deluxe Make)
4
938
3753.6
Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge
-
-
-
2000 liters capacity PVC water storage tank in Second floor
1
46920
46920.4
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
50
485
24275
110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)
10
497
4973
110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
13
293
3816.8
110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
12
232
2784
110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
2
407
814.8
110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
2
58
116.4
110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
10
322
3227
110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make)
2
386
772
110mm U-PVC Door cross tee(Ori Plast/Finolex/Supreme Make)
2
551
1102.4
110mm U-PVC Plain shoe bend(Ori Plast/Finolex/Supreme Make)
2
232
464
110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
30
160
4803
Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
-
-
-
250mm to 375mm thick wall
14
234
3285.8
Supplying all materials , labour, T&P and cutting of RCC roof or cornice for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
7
208
1456.7
Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
3
147
441.9
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
580mm size Orissa pan (Hindware/Parryware/Neycer make)
2
3735
7470.6
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
-
-
-
European water closet with 'P'/'S' trap plain (Hindware/Parryware/Neycer make)
2
3285
6570.4
Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
-
-
-
10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
4
1582
6328.4
Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink
-
-
-
24" x 18" x 10" size sink
1
6921
6921.3
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
-
-
-
550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with Porcelain pedestal.
4
6173
24694.8
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
-
-
-
600mmx450mm size B.E mirror (swivelled type)
4
758
3032
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.
-
-
-
600mmx125mm plate glass shelf with CP/NP guard rails.
4
694
2778.4
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
25mmx600mm long CP towel rail
4
746
2986
Towel ring
5
648
3240.5
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
CP soap holder
12
279
3355.2
Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site.
-
-
-
In Ground floor
2.32
794
1843.7
In First floor
1.9
805
1531.02
Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 40mm size crusher broken hard black granite metal including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
-
-
-
In Ground floor
1.16
5562
6452.62
In First floor
0.94
5885
5532.46
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
-
-
-
In Ground floor
0.78
7089
5529.42
In First floor
0.64
7514
4809.47
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
-
-
-
In Ground floor
33.97
196
6678.5
In First floor
30.96
201
6229.15
Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads, steps and landing with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 30cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge )
-
-
-
In Ground floor
7.74
1248
9661.07
In First floor
6.3
1261
7946.82
Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge )
-
-
-
Glazed tile 30cmx20cm
-
-
-
In Ground floor
33.97
987
33555.57
In First floor
30.96
1007
31195.3
Factory made single leaf rigid FRP(alternately called GRP) sanwhch composite door shutter of 32mm thick laminated ith two GRP skins with wood grain finish fabricated using UV-stabilised Isothealica Gelcoat and one layer of 450 gsm E-glass chopped starand mat (CSM) impregnated with orthopthalic palyester resin. The thikness of the skins shall not be less that 1.50mm expanded polyestyrone(EPS) stuctural foam panel of 29 mm thickness and a density of 20Kg/cu.mtr shall be used as core material .Wooden reinforcements made of seasoned sal wood reinforements for fitting the metal fittings such as tower bolts ,aldrops,handles etc. shall be provided .A Strictira; adehsive compatible with(EPS) foam shall be used for bending the core material,the sal wood reiforcements and the skins.The materials and process for manufacturing the door shutters shall conform to RC-TIFAC composites Design centre's standars and specifications and the door shutters tested in conformation to IS:40250-1998.The finish of door shutter will be plain colour white/Lvory/beige/Light grey/Mahogany/Teak wood of any other colour using high quality pigments .Three heavy whight mild steel butt hinges typpe-I(ISI-marked) size 100 mm are to be fitted on one side of shutter.
6.45
3200
20640
Factory made FRP (alternately called GRP) door frame of sixe75mmX100 mm fabricated using E-Glass chopped strand Mat(CSM) U.V stabilised inopthalic Gelcoat and impregnated with inopthalic resin.The thickness of the GRP sikns shall no be less that 2.00 mm .The door frame consist of foru segments which are provided with plug-in-socket arrangement in-site in the ,ould .The segments are plugged in and are joined together by means of screw . The GRP frame shall be provided with wooedn rainforcement of six locations for high screw holding capacity for fixing metallic hold fast and shall be consolidated by filling with medium destity foam/Plaster of paris with fibre reinforcement,Six numbers of 260mm X 25mm X 5 mm size 'S' shaped M.S flat hold fast shall be provided with the frame .The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design centre's stanards and specifications.The finish of door rrame will be plain colour white/Lvory/Beige/Light grey Golden brown Mahogany/Teak wood sand stone/Champagne /Pastel blue or any other colour using high quality pigments cimplete in all respect as per specification and direction of the Engineer in Charge.
20.2
572
11564.5
Supplying all materials ,labour ,T&P and constructing Gully Trap Chamber of inside size 250mmx250mmx250mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge
-
-
-
Inside size 25cmx25cmx25cm with 8” dia RCC MH cover
1
1720
1720.4
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge
-
-
-
Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
2
10434
20868
Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
-
-
-
Inside size 1.40m dia x 2.00m deep soakway pit
1
24198
24198
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge
-
-
-
110mm dia U-P.V.C. pipe(All round Concrete)
9
1275
11477.7
Construction of 1no 20 Users Septic tank
-
-
-
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.
10.4
291
3034.1
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft.
3.47
313
1086.7
Supplying all labor T&P & filling foundation and plinth with sand well watered & rammed etc. all complete as per direction of EIC.
2.08
794
1652.98
Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 40mm size crusher broken hard black granite metal including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
1.04
5562
5785.1
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
0.69
7089
4891.41
Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:4 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge.
3.9
5678
22147.71
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
19.26
207
3990.67
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
26.56
196
5221.7
Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge
-
-
-
As same as internal plaster
19.26
39
768.47
Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge
-
-
-
RCC floor, roof slab chhaja up to 4.430 m height
3.41
753
2569.78
Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.
0.45
7737
3481.79
Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
0.45
9075
4084.07
Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge.
-
-
-
100mmx100mm size SW Tee
2
415
831
Supplying all materials labour T&P and fitting and fixing 20mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification.
10
277
2773
Supplying all materials labor T&P filling in foundation and plinth with excavated earth well watered and rammed etc all complete as per direction of Engineer-in-charge.
4.9
162
794.19
Construction of 1no 125mmx100mm dia Tube Well
-
-
-
Supplying all materials, labour, T&P and Drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plants and consumable etc. for lowering of 200mm/150mm dia G.I/P.V.C./M.S. casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/P.V.C./M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only.
-
-
-
Drilling of 125mm dia bore
-
-
-
00 mtr to 60 mtr
60
430
25800
Drilling of 100mm dia bore
-
-
-
60 mtr to above
180
415
74700
Supplying all materials, labour, T&P and Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plants etc. all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
-
-
-
Lowering of 125mm dia pvc casing pipe
-
-
-
00 mtr to 30 mtr
60
60
3600
Supplying all materials, labour, T&P and supplying the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plants etc. all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
-
-
-
Supply of 125mm dia pvc(Sch-80) casing pipe
60
831
49878
Supplying all materials, labour, T&P and Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge.
-
-
-
By DTH Rig
1
1000
1000
Supplying all materials, labour, T&P and conducting reconnaisance survey, integrated Hydrological and Geophysical Electrical Resistivity Method) survey and selection of potential source for exploration of ground water including selection and recomendation of site for drilling well in selected locations in any part of the Odisha under the following Geological formation and as per direction of Engineer in charge.
-
-
-
Rocky terrain and bolder formation for 300m depth
2
1122
2244.22
Supplying all materials, labour, T&P and providing , fitting and fixing of submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/ 1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with G.I/P.V.C/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc. all complete as per specification and direction of the Engineer in charge.(Texmo/Crompton Greaves/Kirloskar make).
-
-
-
2 H.P. Single phase/ three phase 3 stage head range of 20 to 35 mtr with discharge capacity 145 to 110 L.P.M. With outlet dia 25mm (Keeping 100% standby).
1
16737
16737.2
DOL control panel
1
3805
3805.5
40mm dia steel short piece
1
152
152.3
Well cap
1
152
152.3
50mm size C.I. Bracket
1
91
91.3
2.50 sqmm flat cable
55
128
7067.5
20mm dia rigid U-PVC pipe
55
6
379.5
Steel rope with cover
55
26
1468.5
Labour charges for lowering including transportation.
1
2000
2000
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes, and pipe fittings confoming to I.S.4985/2000 (10 kgf/sqcm) of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.
-
-
-
32mm dia HDPE pipes(Finolex/Supreme make)
28
99
2794.4
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements