Works Department Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
Refer DocumentsDocument Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_EICCL_73551_2Bid Award Id
ViewTender No
CCE.Ctc.(RandB)24/2021-22Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Cement concrete (1:2:4) in foundation and plinth using 12mm size hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete watering, curing etc, complete to required levels laid in layers to required thickness including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge
5.67
-
5867.05
... More
Construction of granular sub-base by providing close graded Granular sub-base Grading-IV materials as per table 400-I, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MORT&H Specification for Road & Bridge works (5th Revision) as directed by the Engineer in charge
59.34
-
1602.17
... More
RCC work of M-20 Grade with 20mm and down graded size crusher broken granite metal mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts including frame works including cost, conveyance, cost of all labour, T&P, cost of all materials etc. complete as per direction and specification of Engineer-in-charge. Column base footing
143.68
-
4880.9
... More
Column in Superstructure GF
48.94
-
12052.74
... More
1st floor
26.4
-
13601.2
... More
2nd floor
11.27
-
15442.66
... More
3rd floor
6.6
-
17635.59
... More
Plinth Band
33.25
-
5235.74
... More
Lintel (GF)
3.61
-
8406.92
... More
1st floor
10.51
-
9226.24
... More
2nd floor
3.15
-
10192.62
... More
3rd floor
3.12
-
11335.6
... More
Floor Beam GF
42.57
-
12052.74
... More
1st floor
30.73
-
13601.2
... More
2nd floor
8.58
-
15442.66
... More
3rd floor
4.56
-
17635.59
... More
Chajja (GF)
20.07
-
778.16
... More
1st floor
41.64
-
877.77
... More
2nd floor
12.65
-
996.2
... More
3rd floor
7.7
-
1137.22
... More
Staircase (GF)
4.3
-
10106.83
... More
1st floor
4.3
-
11266.12
... More
2nd floor
1.64
-
12640.57
... More
Roof slab (GF)
78.4
-
9008.8
... More
1st floor
65.79
-
9948.54
... More
2nd floor
16.04
-
11059.46
... More
3rd floor
6.39
-
12375.82
... More
Cutting, straightening coiled or bent up M.S. Rod or tor steel using SAIL/RINL/TATA/JINDAL STEEL/ SHYAM STEEL including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge Ground floor
473.75
-
8887.55
... More
1st floor
205.87
-
8911.17
... More
2nd floor
63.66
-
8934.8
... More
3rd floor
34.16
-
8958.42
... More
Aerated Autoclaved Fly Ash Blocks of (625mmx200mmx200mm) having compressive strength not less than 4N/mm2 confirming toIS:2185 in cement mortar (1:6) after immersing the bricks for six hours in water before use in Foundation and plinth for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc. complete along with testing of strength as per relevant I.S.standard andas per specification & direction of Engineer-in-charge. Ground floor in Foundation and Plinth
71.15
-
4618.85
... More
Aerated Autoclaved Fly Ash Blocks of (625mmx200mmx200mm) having compressive strength not less than 4N/mm2 confirming toIS:2185 in cement mortar (1:6) after immersing the bricks for six hours in water before use in Superstructure and for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc. complete along with testing of strength as per relevant I.S.standard andas per specification & direction of Engineer-in-charge. Ground floor Superstructure
94.01
-
4652.18
... More
1st floor
164.94
-
4713.44
... More
2nd floor
72.79
-
4774.71
... More
3rd floor
27.54
-
4835.98
... More
Providing 12mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to outside surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge(Ground floor)
559.54
-
138.96
... More
1st floor
468.21
-
144.45
... More
2nd floor
378.21
-
149.92
... More
3rd floor
99.75
-
155.4
... More
Providing 16mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to outside surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge(Ground floor)
377.1
-
198.16
... More
1st floor
1403.65
-
203.04
... More
2nd floor
382.23
-
207.91
... More
3rd floor
197.39
-
212.8
... More
Providing 6mm thick cement plaster in cement mortar (1:4) in all floors finished smooth to inside ceiling surface of brick walls with watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge (GF)
1180.34
-
155.22
... More
1st floor
528.97
-
159.04
... More
2nd floor
122.2
-
162.86
... More
3rd floor
52.33
-
166.68
... More
Providing fitting and fixing of Granite tiles in floors of approved make over 20mm thick bed of cement mortar(1:4) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge (G,F)
14.85
-
1554.23
... More
1st floor
28.35
-
1564
... More
Providing fitting and fixing of Vitrified tiles in floors of approved make over 20mm thick bed of cement mortar(1:4) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge (G,F)
73.84
-
942.34
... More
1st floor
401.82
-
952.11
... More
2nd floor
72.32
-
961.89
... More
3rd floor
52.33
-
971.67
... More
Providing fitting and fixing of Vitrified tiles in dadoos and skirting of approved make over 12mm thick bed of cement mortar(1:3) jointed with neat cement slurry mixed with pigment to match the sades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge GF
129.64
-
992.56
... More
1st floor
103.14
-
1007.28
... More
2nd floor
44.18
-
1022
... More
3rd floor
38.32
-
1036.72
... More
Priming one coat with wall primer water bound cement primer including sand papering, polishing the surface, cost, conveyances of materials and cost of all labour TandP etc complete as per GFspecification and direction of Engineer in charge GF outside
589.57
-
58.51
... More
Inside
347.07
-
58.51
... More
1st floor Outside
468.21
-
60.94
... More
Inside
1403.65
-
59.97
... More
2nd floor Outside
378.21
-
63.36
... More
Inside
382.23
-
61.42
... More
3rd floor Outside
99.75
-
65.79
... More
Inside
197.39
-
62.88
... More
Painting two coats with a coat of approved Plastic Emulsion paint over a coat of primer to steel surface including sand papering, polishing the surface, cost, conveyances of materials and cost of all labour TandP etc complete as per GFspecification and direction of Engineer in charge
377.1
-
77.33
... More
1st floor
1403.65
-
78.9
... More
2nd floor
382.23
-
80.47
... More
3rd floor
197.39
-
82.05
... More
Painting two coats with anti-fungal resistance Weather Seal Coat of approved shade over a coat of (water bound) wall primer upto any height by means of brush to outside surface of walls after cleaning the surface including watering, curring etc. complete in all floors including cost, conveyance, taxes of all materials, labours sundries T&P required for the work as per specification and direction of Engineer in charge GF
559.54
-
71.07
... More
1st floor
468.21
-
73.67
... More
2nd floor
378.21
-
76.28
... More
3rd floor
99.75
-
78.89
... More
Supplying, fitting & fixing in all floors of M.S.grills and gates, with top rails, steel windows, critical frames for windows balustrades of stair case and parapet railing made out of M.S.square bar/flat as per approved drawing and design including making holes in walls and RCC structure, wood work etc and making good to the damages to walls with cement concrete(1:2:4) with hard crusher broken granite stone chips of 12mm to 20mm size(20mm size not to exceed 25%) of approved quality with cost of all materials labour, cost of welding all T&P, sundreis etc complete in all respect as per specification and direction of Engineer in charge(screws and other hardward required materials to be used in the work shall be of approved quality and specification and shall have to be supplied by the contractor at his own cost
5170.49
-
80.29
... More
Providing, Fitting & Fixing of Stainless steel of 304 grade in hand railing of 50mm outer diameter of 2mm thick of approved Quality & Specification with balustrade of size 32mmX32mmX2mm square pipes in rows including Cost of all Materials, Labour for fabrication, buffing & polishing, cost of all fixtures etc. Complete and as per specification & direction of Engineer-in-charge. All floors
47.7
-
3682.09
... More
Supplying and fitting-fixng of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA/ NCL VERA LTD Casement Door - 60- Series duly manufactured using UPVC reinforeced profiles of 60mm x 55 mm x 25 mm for outer frames, 102 mm x 80 mm for casement Door Sash Profle and 74 mm x 60 mmx2 5mm mullion profile capable of mounting single glazing system structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding the door sash shall be fited with 12mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistant accessories like cliping locking system made of aluminium 1 No per set of sashes and the system is to be installed at the side using anchor fasteners, silicone rubber sealant, easy glazing / deglazing at side etc.including cost andconveyance of all materials conforming to ASTM D 638-421477-95 and the applicable codes and standards.As per specification approved by the Department & as per derection of the E.I.C . SE No 16100 dt 05/05/2020 .
84.43
-
8963
... More
Priming one coat with any approved primmer (To Receive Enamel paint) to give an even shade excluding cost of primer for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.
107.99
-
54.25
... More
Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride(UPVC) (FENESTAI Three Track - Three Panel sliding window- 60- Series duly manufactured using UPVC reinforced profiles of 108mm x 45 mm x 2.5 mm for outer frames and Window Sash of 39 mm x 58 mm x 25 mm capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window frame shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reinforced Large Coupler at the site using anchor fasteners. silicon rubber sealant. easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638-14 EN-477-95 and other applicable codes and standards .As per specification approved by the Department & as per derection of the E.I.C . SE No 16100 dt 05/05/2020 .
116.17
-
5984
... More
Painting two coats with a coat of approved synthetic enamel paint over a coat of primer to steel surface including sand papering, polishing the surface, cost, conveyances of materials and cost of all labour TandP etc complete as per GFspecification and direction of Engineer in charge
107.99
-
134.76
... More
2.5cm thick grading concrete of proportion (1:2:2) over roof slab using 4.7mm size chips of approved quality including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge GF
72.14
-
291.31
... More
1st floor
404.81
-
319.18
... More
2nd floor
56.98
-
347.04
... More
3rd floor
51.15
-
374.91
... More
Providing & laying of 80mm thick factory made cement concrete interlocking paver block of M35 grade and approved make variety colour and size made by Block making machin with strong vibratory compaction of approved design and shape, laid in required colour and pattern over 50mmthick compacted bed of coarse sand ,filling the joints with fine sand etc.all compelte including cost,conveyance,royalty,taxes of all materials,labour,T & P etc.Complete as per direction of EIC.
561.2
-
766.62
... More
PCC M-15 Grade using 40 mm and down graded size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts including form works including centering and shuttering with cost, conveyance, cost of all labour, T&P, cost of all materials etc. complete as per direction and specification of Engineer-in-charge
2.13
-
2512.94
... More
Finishing wall surface with cement based wall putty(water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges, conveyance, taxes of all materials and cost of all labour with TandP etc complete as per specification and direction of Engineer in charge
377.1
-
94.17
... More
1st floor
1403.65
-
107.46
... More
2nd floor
382.23
-
120.75
... More
3rd floor
197.39
-
134.04
... More
E.I. Works:-Recessed wiring to light point/ fan point/Call bell point with 1.5sqmm FR PVC Insulated single core multistarand copperConductor of ISI marked with 20mm dia non metalic PVC flexible conduct with 6Amps Modular switch socket & 1.5sqmm FR PVC Single core multistrand copper conductor as earth wire includingall accessories and connection as per direction of Engineer in charge (Make-Legrand / L&T / Havels ) -do- light point Group-A
82
-
544
... More
-do- light point Group-B
86
-
771
... More
-do- light point Group-C
90
-
1054
... More
-do- Fan point Group-B
56
-
771
... More
-do- Fan point Group-C
61
-
1054
... More
-do- Call Bell point Group-C
10
-
1054
... More
Supply and fixing of modular metal box 150x75x60mm deep on surface with laminated cover for fixing 5/6Amps modular switch & socket etc as per direction of Engineer-in-charge.Make-Legrand / L&T / Havels )
62
-
501
... More
Supply and fixing of 5/6Amps Modular socket on existing board.Make-Legrand / L&T / Havels )
72
-
74
... More
Supply and fixing ofmodular metal Box of 180mm x100 X 60 mm nominal size in recess with modular fixing of 5 pin,15/16 Amp modular type switch socket , ISI marked connection painting etc as required complete in all respect as per direction of Engineer in charge(Make- Legrand / L&T / Havels )
50
-
638
... More
Supply &Fixing of 3nos 3pin 5/6Amps modular switch socket,1no of 5pin 15/16Amps socket outlet including connection.
30
-
1490
... More
Recessed wiring to submain in the following insulated single core multistrand copper conductor of ISI marked in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer-in-charge.(Make of wire-Finolex/L&T/Havells) - 2x1.5 sqmm +1x1.5 sqmm
770
-
127
... More
2x2.5 sqmm +1x1.5 sqmm
2420
-
141
... More
2x4 sq mm+1x1.5 sqmm
620
-
158
... More
2x6 sq mm+1x2.5 sqmm(Meter box to MCB Box)
418
-
189
... More
Supply and fixing of Ding Dong(call Bell).Make-Anchor/Cona
10
-
120
... More
Supply and fixing of Bakelite Angle holder/Batten Holder of ISI marked in place of ceiling Rose complete in all respect as per direction of Engineer in charge (Make : Cona / Anchore)
94
-
58
... More
S/F of 1x1.5sqmm pvc wire for Inverter wiring.
1120
-
46
... More
Supply and fixing Earthing with copper earth plate 600 mm X 600 mm X 3.15 mm thick ISI marked including accessories as required.
4
-
4912
... More
Extra for using salt & charcoal for Earthing.
40
-
689
... More
Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal & salt.
4
-
2453
... More
Providing and fixing 8 SWG (4 mm) dia copper wire on surfae or in recess for loop earthing along with existing surface / recessed conduit / submain wiring /cable as required.
218
-
93
... More
Supply and fixing of following MCB distribution board 250V on recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) Make-siemens/ Legrand/schnider - 12way Double door
10
-
1896
... More
8way Double door
4
-
1623
... More
Supply and fixing of following MCB "C" series suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc (Make- siemens/ Legrand/schnider )- 6/10Amps single pole MCB.
74
-
130
... More
32Amps double pole MCB.
25
-
331
... More
63Amps double pole MCB.
14
-
322
... More
SITC of Energy efficient 1x30watt LED Tube light fitting with complete with as per direction of Engineer-in-charge.Make- Philips/Bajaj
120
-
782
... More
Supply and fixing of 0.5watt LED type foot/night light fitting with complete.Make-Havells/Philips
45
-
550
... More
Supply and fixing of 9watt LED lamp.Make-Havells/Philips
47
-
161
... More
Supply and fixing of 90watt 5700K LED asymmetric optic (ISI marked) street light versatile diacast alluminium IP66 roadway luminair with high power LEDs as light source and electronic driver with heavy duty GI bracket 36mm dia and required length complete with all connnection testing and commissioning etc as required as per direction of Engineer-incharge (Make:Bajaj / Philips / Crompton)
12
-
7500
... More
Supply and fixing of 22watt round type LED Celling light size-8"x8" with complete.(Make:Bajaj / Philips / Crompton)
80
-
2450
... More
Supply and fixing of 22watt LED IP-65 Bulk head luminaries with opal difuser ISI marked complete with all respect as per direction of Engineer in-charge at the staircase top entrance.Make- Bajaj/Philips/Crompton
8
-
2450
... More
Supply and fixing of 36watt LED Type Gate light(Rubby model) with complete.Make-Havells
2
-
7500
... More
Supply and fixing of MS Jalli for Gate light.
2
-
3000
... More
S/Fof 1200mm sweep white/milky colour ceiling fan ISI Marked with regulator including connection complete in all respect as per direction of Engineer in charge (Havells velocity/Crompton jura/Orient PSPO)
90
-
2194
... More
Supply and fixing of heavy duty type Extra fan down rod 24x3cm
90
-
120
... More
Supply and fixing of fan hock
90
-
150
... More
Supply and fixing of 12 inch Heavy duty (Metalic Colour) Exahust Fan with wall cutting, S/F of proper size of hume pipe, concreating, plastaring, painting with all connection testing and commissioning complete in all respect as per direction of Engineer in charge(Make Almonar/Khaitan,V-guard)
27
-
2348
... More
Supply and fixing of 32Amps FTDP on a suitable board for street light control.Make-Anchor/Cona
6
-
120
... More
Supply & Installation of A.C. starter modular type,L&T/Siemens make with overload relay 9-14Amps fited with suitable box as per direction of Engineer-in-charge.
25
-
610
... More
Supply of 4x1.5sqmm 4core copper Armoud cable for street light & gate light Supply.Make-Polycap/Havells
320
-
145
... More
Laying of on wall surface with clamping.
316
-
74
... More
Supply and fixing of 63Amps ICTPN Main switch on MS Box including connection.Make-Anchor/L&T
10
-
2591
... More
Supply, Installation,testing & commissioning of panel board consists of 4nos 63Amps double pole MCB & 4nos 63Amps procelain kit kat with indicator & connector for control of 4nos qtr to be installed at each floor.Make-Legrand/L&T
4
-
28500
... More
Supply and fixing of 2x8sqmm Alluminium service wire with no-8 GI Wire.
276
-
42
... More
P.H. Works:-Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge.
25mm dia PVC ASTM pipe (sch-80) In ground floor
30
-
184.9
... More
40mm dia PVC ASTM pipe (sch-80)
120
-
320.2
... More
50mm dia PVC ASTM pipe (sch-80)
50
-
398
... More
In first floor 25mm dia PVC ASTM pipe (sch-80) In first floor
100
-
190.9
... More
32mm dia PVC ASTM pipe (sch-80) first floor
40
-
251
... More
40mm dia PVC ASTM pipe (sch-80)
50
-
329.7
... More
In 2nd floor- 25mm dia PVC ASTM pipe (sch-80) In second floor
30
-
196.8
... More
32mm dia PVC ASTM pipe (sch-80) in second floor
40
-
258.5
... More
40mm dia PVC ASTM pipe (sch-80)
20
-
339.3
... More
50 mm dia PVC ASTM pipe (sch-80)
50
-
421.3
... More
In 3rd floor- 25mm dia PVC ASTM pipe (sch-80) In third floor
30
-
202.8
... More
32mm dia PVC ASTM pipe (sch-80) in third floor
30
-
266
... More
40mm dia PVC ASTM pipe (sch-80)
30
-
348.9
... More
In 4th floor- 40mm dia PVC ASTM pipe (sch-80)
40
-
358.4
... More
50 mm dia PVC ASTM pipe (sch-80)
50
-
444.5
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes conforming to IS:15778 having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00. spacing. This includes Jointing of pipes & fittings with one step CPVC solvent cement and testing of Joints all complete as per specification and direction of the Engineer in charge.
20mm dia CPVC pipe In ground floor
10
-
240.5
... More
25mm dia CPVC pipe
20
-
328.8
... More
In 1st floor- 20mm dia CPVC pipe
50
-
248.5
... More
25mm dia CPVC pipe
80
-
336.8
... More
In 2nd floor- 20mm dia CPVC pipe
15
-
256.5
... More
25mm dia CPVC pipe
30
-
344.8
... More
In 3rd floor
20mm dia CPVC pipe
10
-
264.5
... More
25mm dia CPVC pipe
15
-
352.8
... More
Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.
250mm thick wall in ground floor
4
-
46.2
... More
In first floor
24
-
46.5
... More
In 2nd floor
6
-
47.9
... More
In Third floor
3
-
48.8
... More
Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing GI pipes / PVC pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of the Engineer in charge.
In first floor
12
-
154.4
... More
In 2nd floor
8
-
155
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge.
In ground floor
30
-
166.4
... More
In First floor
130
-
171.3
... More
In 2nd floor
45
-
176.8
... More
In 3rd floor
25
-
183
... More
Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge. 15mm dia CP bib cock Jaquar CON-CHR-053KN make
10
-
1082.8
... More
15mm dia CP angle stop cock(Jaquar CON-CHR-035KN Make )
45
-
861.3
... More
15 mm dia CP long body Bib cock (Jaquar CON-CHR-107KN Make )
15
-
1451.9
... More
20mm dia C.P. concealed Stop Cock (Jaquar make )CON-CHR-069KN
15
-
885.9
... More
15mm dia CP two way bib cock (Jaquar CON-CHR-041KN make )
5
-
1255
... More
15mm dia CP Health Faucet (ALD-CHR- 575 )
5
-
1058.1
... More
25mm dia brass or gun metal fullway valve(Shakti Make)
10
-
926.1
... More
40mm dia brass or gun metal fullway valve(Shakti Make)
6
-
1722.1
... More
50mm dia brass or gun metal fullway valve(Shakti Make)
12
-
2551.3
... More
25mm dia PVC ball cock (water tec make )
10
-
286.2
... More
15mm dia CP flange
70
-
40.3
... More
15mm dia CP extension piece
70
-
59.3
... More
Sink Cock - Jaquar Make - CON-CHR-349KN
10
-
1476.5
... More
Supplying all materials, labour, T&P and fitting and fixing CP shower with 15mm or 20mm inlet with CP shower arm including polishing all complete as per specification and direction of the Engineer in charge 15mm dia CP revolving shower ( Plaza make )
15
-
606.4
... More
Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge 10 litres capacity pvc low level cistern with 32mm dia CP long flush bend Slimline white
15
-
1486.6
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge In ground floor110mm dia U-PVC SWR pipe(Ashirbad / Supreeme )
350
-
453.8
... More
110mm U-PVC door tee
28
-
386
... More
110mm U-PVC Plain tee
25
-
322.7
... More
110mm U-PVC door bend
19
-
293.6
... More
110mm U-PVC plain bend
40
-
232
... More
110mm dia U-PVC 'P' trap
15
-
497.3
... More
110mm dia U-PVC Plain Shoe Bend
20
-
232
... More
110mm dia U-PVC offset with out ear
15
-
407.4
... More
110mm dia U-PVC cowl
9
-
58.2
... More
125mm dia CP grating
36
-
82.7
... More
Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge 250mm to 375mm thick wall
50
-
191.2
... More
Supplying all materials, labour, T&P and cutting of R.C.C roof or cornice for taking H.C.I pipes and making good the damages etc all complete as per P.H.Specification and direction of the Engineer in charge.
24
-
155.4
... More
Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class Fly ash brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge. Fixing 1000Ltr Roto-moulded water storage tank (Syntax Make) on the roof of 3rd floor - In 4th Floor
5
-
25867.1
... More
Fixing 1500Ltr Roto-moulded water storage tank (Syntax Make) on the roof of fst floor - In 2nd Floor
4
-
31958.2
... More
Fixing 1500Ltr Roto-moulded water storage tank (Syntax Make) on the roof of ground floor - In fst Floor
1
-
30157.9
... More
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge 580mm size Orissa pan (Parryware / Nycer make )
10
-
2255.9
... More
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge. European water closet with ‘S’ trap plain (Parryware / Nycer make )
14
-
2621.3
... More
Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge . 600x450x250 mm stainless Steel kitchen sink-(jayna make )
10
-
4892.7
... More
Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge. 550mmx400mm size wash hand basin with porcelain pedestal Parryware/ Hind ware /Neyser make )
20
-
3902.9
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted minimum 5mm thickon 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge. 600mmx450mm size B.E mirror
20
-
657.6
... More
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge Acrylic glass shelf with CP guard rails
20
-
593.5
... More
corner shelf
15
-
577.5
... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 25mmx450mm long CP towel rail
15
-
694.9
... More
C.P. Ring Towel Rail
11
-
462.1
... More
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge .CP soap holder
45
-
175
... More
Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In ground floor .
0.73
-
4163.5
... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In ground floor .
0.37
-
5927.8
... More
In first floor
3.03
-
6228.2
... More
In 2nd floor
0.64
-
6273.7
... More
In 3rd floor
0.32
-
6971
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
32.03
-
152.1
... More
In first floor
155.82
-
154.1
... More
In 2nd floor
34.02
-
155.3
... More
In 3rd floor
17.01
-
158.8
... More
Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. 30 cm. x 30 cm. Kajaria / Somany / Johnson to be pree approved .
In ground floor
7.3
-
912.7
... More
In first floor
30.3
-
922.5
... More
In 2nd floor
6.36
-
932.8
... More
In 3rd floor
6.36
-
943.5
... More
Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge.45cm. x 30cm. Kajaria / Somany / Johnson to be pree approved . In ground floor - Same as C.P (1:4) ground Floor
6.36
-
888.5
... More
Same as C.P (1:4) First Floor
155.82
-
903.2
... More
In 2nd floor - Same as CP(1:4) Second Floor
34.02
-
918.7
... More
In 3rd floor - Same as CP(1:4) Third Floor
17.01
-
935
... More
Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter with FRP frame of size 45x90mm.(Darwaja /Exon Door make)
23.63
-
5440
... More
EXTERNAL P.H. WORK Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.
110mm dia
95
-
1082.5
... More
160mm dia
92.3
-
1799.3
... More
Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge.
Inside size 250mmx250mm
26
-
1422.6
... More
Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:1.5:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 760mmx760mmx460mm
10
-
8413.4
... More
---- do --- addl depth of 0.15m upto 0.90m
8
-
1056.8
... More
R.C.P.C.Manhole Cover
10
-
1093.1
... More
Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 910mmx910mmx910mm
12
-
16471.4
... More
R.C.P.C.Manhole Cover
12
-
1093.1
... More
Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and fly ash brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge 1.40m dia x 2.00m deep soakway pit
9
-
19266.4
... More
Construction of 50 users RCC septic tank- 2 Nos - Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.
55.9
-
204.2
... More
Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.
11.18
-
219.2
... More
Supplying all materials, labour, T&P and providing shoring and shuttering foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per direction of the Engineer in charge.
65.6
-
235.2
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
6.16
-
426.1
... More
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
6.16
-
4545.6
... More
Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
31.68
-
155.9
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
31.68
-
32.1
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. R.C.C floor and roof slabs up to 4.30m height
20.68
-
428
... More
R.C.C beams,columns,girder and bressmer etc.
147
-
732.4
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
18.78
-
8253.4
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
23.52
-
6638.3
... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
1.6
-
5927.8
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
10.56
-
152.1
... More
Supplying all materials, labour, T&P and providing brick work with Fly ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
1.2
-
4777.9
... More
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
12
-
242.9
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
11.38
-
113.5
... More
Construction of 20 users septic tank .Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.
10.88
-
204.2
... More
Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.
4.57
-
219.2
... More
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
0.58
-
4545.6
... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12m size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
1.29
-
5927.8
... More
Supplying all materials, labour, T&P and providing brick work with Fly Ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.F/P
4.63
-
4777.9
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
35.43
-
152.1
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
16.38
-
32.1
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge R.C.C floor and roof slabs
3.38
-
428
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
0.33
-
8253.4
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
0.44
-
6638.3
... More
Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm UPVC Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge110mm dia UPVC Tee
2
-
346.9
... More
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
5
-
242.9
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
4.48
-
113.5
... More
Sinking of 150mm x 125mm size Tube well through D.T.H or Combination drilling rigs in hard rock areas with GI/PVC casing pipes Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (650 cfm/ 200 psi) as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of 125 mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tube well).Labour for drilling of 150 mm dia bore 00 mtr to 125 mtrs . 3x 130
260
-
663
... More
Lowering the following size G.I/ PVC pipes with or without slotted pipes as per the necessity from ground level and fitted and fixed up in perfectly vertical position, including cutting and threading pipe and slotted pipe and supplying and fixing all jointing materials, tools and plant etc. complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above.Labour for lowering of 150 mm dia casing pipe in bore 00 mtr to 45 mtrs
102
-
128.8
... More
Cost of 150 mm dia casing Pipe
103
-
1251.4
... More
Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of Engineer-in-Charge.
2
-
3863.7
... More
Supplying all materials and labour, tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied by the Department)
2
-
1173.1
... More
Supplying all materials, labour, tools and plant and withdrawing casing pipes from the unsuccessful bore and depositing in the departmental store in good condition.
100
-
233.4
... More
Supplying all materials, labour, T&P and constructing Bore well protection chamber of the inside size 650x650x1000hight with cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ash brickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:4) inside and outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.
2
-
10127.3
... More
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge 1H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.M.P with outlet dia of 32mm
2
-
13775.6
... More
DOL Control panel
2
-
3805.5
... More
40mm dia steel short piece
4
-
202
... More
Well cap
2
-
152.3
... More
50mm size CI bracket
4
-
91.3
... More
2.50sqmm flat cable
140
-
128.1
... More
20mm dia rigid UPVC pipes
100
-
6.9
... More
Steel rope with cover
100
-
26.7
... More
40mm dia HDPE pipe
100
-
147.2
... More
Labour charges for lowering including transportation
2
-
2000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements