Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
Refer DocumentsDocument Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_EICCL_75306_5Bid Award Id
ViewTender No
CCE DKL R and B/13-2021-22Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
(a)Ground Floor
111.82
-
4352.12
(b)Second Floor
3.92
-
4839.6
PCC M20 in foundation and floors using 20mm nominal size clean hard black cursher broken granite chips of approved quality from approved quarry including lowering laying concrete in layers not exceeding 15cm thick to the required level compacting watering curing centering & shuttering etc. complete including cost conveyance royalty taxes of all materials and all labour T&P required for the work etc. complete as per direction of the Engineer-in-charge.
15.28
-
5043.3
Fly Ash brick masonary using Fly Ash brick having crushing strength not less than 75kg/cm2 in cement mortar of (1:6) after immersing the bricks for six hours in water before use in Foundation & Plinth including splays cutting circular moulding corbelling champhering and similar such type of work watering and curing including cost conveyance royalty taxes of all materials and cost of all labour with T&P required for the work etc. complete as per direction of the Engineer-in-charge.
69.46
-
4121.68
Filling foundation and plinth with excavated earth ramming etc complete as per approved drawing and technical specifications as per Clause 304 and Section 900 of MORT&H Specifications for Road & Bridge works (Latest Revision) complete in all respect & as per direction of the Engineer-in-Charge.
238.17
-
104.89
RCC work of M-20 in all floors having a minimum compressive strength ( in work test) 200kg/cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using 10mm size to 20mm size black hard crusher broken granite stone chips (10mm size 40% & 20mm size 60%) of approved quality & from approved quarry including hoisting lowering laying and compacting concrete with centering & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary and providing required No. of fan hooks as required including cost, conveyance, royalties and taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect but excluding cost of MS rod / Tor steel and binding wire and labour charges for bending binding and tying the grills etc. complete as per direction of the Engineer-in-charge.
-
-
-
(A)R.C.C. foundation and footing bases of columns
-
-
-
(a)Ground Floor
139.36
-
5202.81
(B)R.C.C. Plinth Beam
-
-
-
(a)Ground Floor
38.34
-
5468.66
(C)R.C.C. Beams, columns
-
-
-
(a)Ground Floor
71.05
-
10997.86
(b)First Floor
51.21
-
12272.54
(c)Second Floor
2.34
-
13797.96
(D)R.C.C. Lintel
-
-
-
(a)Ground Floor
12.35
-
8878.88
(b)First Floor
8.44
-
9729.74
(c)Second Floor
0.54
-
10746.54
(E)R.C.C Roof slab
-
-
-
(a)Ground Floor
109.76
-
9446.9
(b)First Floor
72.33
-
10411.4
(c)Second Floor
2.43
-
11564.6
(F)R.C.C Chajja
-
-
-
(a)Ground Floor
58.04
-
812.21
(b)First Floor
38.08
-
914.53
(c)Second Floor
0.9
-
1037.05
(G)R.C.C Shelves
-
-
-
(a)Ground Floor
125.28
-
369.14
(b)First Floor
112.32
-
396.73
(H)R.C.C. Staircase
-
-
-
(a)Ground Floor
3.46
-
10512.87
(b)First Floor
2.7
-
11690.62
Labour charges for straightening the coiled or bend up M.S. rod / HYSD bars confirming to Gr. Fe-500, cutting bending binding lapping placing welding etc. (Confirming to ISI specification) and jointing if necessary by lapping and tying the grills and placing in position as required for RCC work as per approved design hoisting lowering and laying in position including cost conveyance & taxes of M.S. rod / tor steel (Primary Producer like- SAIL/RINL/TATA/ JINDALSTEEL/ SHYAM STEEL) make) and binding wire of 18 to 20 gauge (as approved by the deptt.) weight of over lapping, couping, welded joints, spacer bar, chair, stage, hanger and binding wires shall not be considered for payment at all. Standard co-efficient of different size of the steel shall be considered. Welding & lapping should be confirming to relevant clause of IRC 1987 etc. complete as per direction of the Engineer-in-charge.
-
-
-
(a)Ground Floor
448.39
-
8549.77
(b)First Floor
175.17
-
8573.42
(C)SecondFloor
7.01
-
8598.24
Fly Ash brick masonary using Fly Ash brick having crushing strength not less than 75kg/cm2 in cement mortar of (1:6) after immersing the bricks for six hours in water before use in superstructure including splays cutting circular moulding corbelling champhering and similar such type of work watering and curing including cost conveyance royalty taxes of all materials and cost of all labour with T&P required for the work in all floors etc. complete as per direction of the Engineer-in-charge.
-
-
-
(a)Ground Floor
119.85
-
4160.02
(b)First Floor
104.38
-
4424.9
(C)Second Floor
65.28
-
4729.53
Fly Ash brick masonary using Fly Ash brick having crushing strength not less than 75kg/cm2 in cement mortar of (1:4) after immersing the bricks for six hours in water before use in superstructure including splays cutting circular moulding corbelling champhering and similar such type of work watering and curing including cost conveyance royalty taxes of all materials and cost of all labour with T&P required for the work in all floors.
-
-
-
(a)Ground Floor
56.76
-
4385.73
(b)First Floor
59.61
-
4650.61
Providing 20 mm thick cement plaster in cement mortar (1:6) finished smooth to brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge.
-
-
-
(a)Ground Floor
152.12
-
209.36
Providing 16mm thick cement plaster in cement mortar (1:6) finished smooth to brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge.
-
-
-
(a)Ground Floor
699.37
-
198.72
(b)First Floor
585.6
-
203.62
(C)Second Floor
295.44
-
208.67
Providing 12mm thick cement plaster in cement mortar (1:6) finished smooth to brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge.
-
-
-
(a)Ground Floor
1734.92
-
139.44
(b)First Floor
1463.13
-
144.92
(C)Second Floor
290.33
-
150.68
Providing 6mm thick cement plaster in cement mortar (1:4) finished smooth to brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge.
-
-
-
(a)Ground Floor
1012.19
-
156.18
(b)First Floor
672.64
-
160.03
Supplying, fitting, fixing of Kota Tiles in floors, treads, steps and landing slab on 20mm thick bed of cement mortar (1:4) joined with neat cement slurry mixed with pigments to match the shades of the tiles including, rubbing and polishing the surface with cost, conveyance, royality and all taxes of all materials etc. complete as per direction of the Engineer-in-charge.
-
-
-
(a)Ground Floor
605.32
-
752.42
(b)First Floor
431.45
-
762.2
Supplying, fitting, fixing of Kota Tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry etc. complete including cost of all materials, labour T&P etc required for the work all complete as etc. complete as per direction of the Engineer-in-charge.
-
-
-
(a)Ground Floor
84.77
-
856.15
(b)First Floor
65.19
-
870.88
Supplying fitting and fixing in position well dressed seasoned sal wood work in choukaths including two coats of coaltaring to wall side faces including cost, conveyance, royalties and all taxes of all materials and cost of all labour with T & P required for the work etc. complete as per direction of Engineer-in-charge.
1.52
-
52895.04
Providing fitting fixing of approved make 32mm thick (Laminated Finished) factory made Flush Doors, of different sizes finished with 1mm thick laminate of approved shade and colour to both sides fixed to teak wood beading/ liping as per the design, approved make Door closer,Door Stoper etc with all accessories, labour T&P etc complete as per direction of Engineer-in-charge.
75.56
-
4655.8
Supplying, fitting, fixing up Alluminium window (openable type) made up aluminum Section 9778, as windows frame section No. 4095, 4096 and 9777, 3994 as shutter frame with 12 mm thick pre-laminated particle board as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge.(Aluminium Frame only)
873.54
-
661.77
Providing fitting, fixing of 5mm thick Black Glass fixed on door frame and windows frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P , hire charges of drilling machine, labour charges etc. complete as per direction of the Engineer-in-charge.
192.38
-
557.86
Providing,fitting,fixing of Aluminium Door with OEL anodized Al.door section of 9202 as vertical member 9201 as top and 9200 as bottom and middle member and 6mm black glass in top portion with 12mm thick pre-laminated board fixed on door frame by means of tapered clip no.4660 and the frame to be completed by means of jointing angle no 1855 with automatic door closer,6 lever mortice lock,door stopper.handle etc including all cost of labour,T&P hire charges of drilling machine,labour charges etc complete as per direction of engineer-in-charge. (Aluminium Frame only)
192.68
-
428.9
Providing fitting, fixing of 12mm thick pre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P , hire charges of drilling machine, labour charges etc. complete as per direction of the Engineer-in-charge.
7.64
-
595.69
Supplying fixing and fittings MS window grills, Doors, MS verandha grills and MS grill gate of approved design and drawing made out of MS flat and MS angle at work site with one coat of anticorrosive red oxide zink chrome primer including cutting holes in brick or RCC walls and fixing with CC (1:3:6) including cost conveyance royalty and taxes of all materials all labour T&P required for the work complete (payment will be made on weight basis only)(In all floors) etc. complete as per direction of the Engineer-in-charge.
-
-
-
(a)Door
240.81
-
73.23
(a)Window grill
5524.5
-
57.57
Painting two coats with water proofing weather coat over a coat of primer of approved shade by means of brush to outside surface of walls complete in all floors with cost, carriage and all taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect as per direction of the Engineer – in – Charge.
-
-
-
(a)Ground Floor
868.42
-
122.45
(b)First Floor
490.83
-
125.57
(C)Second Floor
297.26
-
128.84
Painting 2 coats with distemper paints over a coat of primer of approved shade by means of brush to outside surface of walls complete in all floors with cost, carriage and all taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect as per direction of the Engineer – in – Charge.
-
-
-
(a)Ground Floor
3079.82
-
126.55
(b)First Floor
2511.34
-
129.12
(C)Second Floor
89.09
-
131.77
Painting two coats with synthetic enamel paints over a coat of primer including cleaning the surface with sand papering and using paints of approved quality and approved shade including cost conveyance taxes of all materials all labour T&P etc. complete as directed by the Engineer in charge.
-
-
-
(a)Ground Floor
86.86
-
196.75
(b)First Floor
86.86
-
201
(C)Second Floor
1.26
-
205.38
Providing 25 mm thick Grading Concrete (1:2:2) using 10mm to 6mm size chips finished smooth on roof slab etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge.
-
-
-
(a)Ground Floor
225.75
-
298.52
(b)First Floor
578.66
-
326.39
(b)Second Floor
19.44
-
358.43
Providing, Fitting & Fixing of Stainless steel of 304 grade in hand Railing of 50mm outer diameter of 2mm thick of approved Quality & Specification with balustrade of size 32mmX32mmX2mm square pipes in rows including Cost,conveyance of all Materials, Labour ,T&P required for fabrication, buffing & polishing, cost of all fixtures etc. complete and as per specification & direction of Engineer-in-charge (In all floors)
182.36
-
286.8
Providing & fixing 12 mm thick Bitumenous expansion joint board as per specification & direction of Engineer-in-charge.
44.8
-
608.55
Providing and fixing of Rain Water PVC pipe of Medium gauge 100mm dia including fixing with cost of all materials etc complete as per specification and direction of Engineer in charge.
176
-
217
Providing Pre Anti termite treatement of best quality including basic cost, conveyance of all materials, cost of all labour, T&P required for the work etc. including labour cess complete as per direction of the Engineer-in-charge
766.48
-
104.5
E.I. WORKS:- Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 6Amp, 250V Modular switch ISI marked and ceiling rose ISI marked mounted on metal box having front Modular cover of suitable size, metal box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection.(Make of wire-Finolex /Anchor/Havells/)( Make of switch -Legrand /Roma )
-
-
-
Group-A -L.P - 60
60
-
546.18
Group-B L.P - 62 F.P- 30 E.F.P - 10
97
-
774.33
Group-C L.P - 70 F.P- 30 E.F.P -10 C.B.P-4
114
-
1060.49
Wiring for twin control light point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess PVC conduit with 2 way Modular type switch, Modular plate, suitable GI Box and earthing point with 1.5 sq.mm FR PVC insulated single core multistrand
38
-
706.61
Supply and fixing of 5 Amp plug with switch on existing board (Piano type/cover including connection etc. as required )( Make of switch -Legrand /Roma/Anchor )
50
-
223.51
Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6Amp & 16Amp socket outlet and 16Amp Modular switches connection (make- Legrand /Roma/Anchor)
10
-
639.09
Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required.(Make of wire-Finolex/Anchor/Havells)
-
-
-
2 X 1.5 sq.mm +1 X 1.5 sq.mm -do-
345
-
127.56
2 X 2.5 sq.mm +1 X 1.5 sq.mm -do-
580
-
141.52
2 X 4 sq.mm +1 X 1.5 sq.mm -do- for power point &A.C point.
68
-
158.84
2 X 6 sq.mm + 1 X 2.5 sq.mm -do-M.S Box to M.C.B Box
135
-
189.98
4x10sqmm+2x4sqmm in 25mm dia
64
-
414.65
Inverter Wiring 1x1.5 mm
205
-
46.48
S/F of AC point consisting of 32A stater with mcb all connection complete as per direction of Engineer in charge( Make -Legrand /Roma )
4
-
1250
S/F of 1' X 18watt T-5 fitting( Make-Crompton / Philips /Havells )
105
-
762
Bulkhead fitting Energy saving new geration 10W LED IP65 bulkhead luminaire with opal diffuser 10WLED6000K(Philips/Havells/crompton)
10
-
1550
S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose .
36
-
20
Supply and fixing of 9 watt Led bulb to be fixed at angle/batten holder point.(Make:Philips/Havels/Crompton)
36
-
136
S/F. of 15Wt. LED Surface mounting down lights of( MAKE- Havels/phillips/Crompton )
26
-
1597
Earthing.
-
-
-
Supply and fixing of Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required
2
-
2462.25
Providing and fixing 6 SWG G.I. wire on surfae or in recess for loop earthing along with existing surface / recessed conduit / submain wiring /cable as required.
40
-
20.2
S/F of Copper Plate Earthing (600x600x3mm)with running Copper Flat 25x5mm from coper plate to funel of 40mm dia GI PIPE heavy duty with including all accessories, excavation of earth and providing masonary work with cover plate having loccking arangement and and , charcoal, salt , funnel , tinned brass bolt, check nut and washer complete in all respect as per Govt. schedule of rate 2011 specification as per Direction of Engineering -in-Charge.
4
-
10588
Suppy & laying of Extra copper flat 25 x 5mm for running earth
55
-
516.17
Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution 415V on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required ( MAKE-Legrand/Seimens/schneider)
-
-
-
4 way (4+12) double door horizontal type
2
-
2159.22
6 way (6+18) double door horizontal type
1
-
2502.05
Providing and fixing of following capacity TP & N MCB switch unit inside the existing mcb distribution box including drilling holes in the box making connections, etc as required .( MAKE-Legrand/Seimens/schneider/L & T)
-
-
-
63 Amp TP & N MCB
3
-
2350
Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make- Havells/ Legrand /L & T.)
-
-
-
8way, Double door
12
-
1624.49
Supply and fixing of 5Amp to 32A rating 240 V/415 V "B" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make- Legrand /L&T/C&S)
-
-
-
Single pole (SP)
72
-
130.82
32/40Amp
26
-
1381
S/F of Street lights 90W generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover.(Phillips/Havells /Crompton )
10
-
10330
S/F of modular type Computer Board Consisting 3 Nos of 5Amp ,5Pin 240V F.T. socket and Switch with all connection complete in all respect as per direction of Engineer in charge(Make-Anchor/Legrand/roma)
3
-
1510.86
S/F of 1200mm sweep Opal white Colored Alluminium Body, Copper winding, High speed ceiling fan (Make-Crompton Model-Riviera High Speed, Polycab Model-Vital, Polar Model-Winpro ) etc.
60
-
2378.87
Metal Exhaust Fan 12" size(Make-Crompton Drift air or Equivalent model of Bajaj/ Philips /Havelles/panasonic)
20
-
2332
S/F of modular type fan Regulator ( Make -Legrand /Roma )
60
-
294
Supply and fixing of superior type Ding Dong call bell / buzzer of ISI marked, on 6" X 4" conforming to IS-2268/1994 and bell push of ISI marked , conforming to IS-1293/ 1988 (make-Cona/ Anchor)
4
-
124
S/F of Wall mounted fan 16" size. (Make-Havells/Usha/Almonard/crompton)
8
-
2365
Supplying, installing and commissioning of ISI ABC Powder 4 Kg Fire Extinguisher containing Mono Ammonium Phosphate Powder 50, Stored Pressure Type,Pressure Gauge, fittted with discharge hose, wall mounting bracket etc., Discharge Time less than 15 Secs, Controllable discharge mechanism, Range minimum 4 Meters, applicable on Class A,B,C and electrically started Fire, A Rating- 8A, B Rating 34B, Can Construction : Deep drawn & Co2 Mig welded, Valve Construction : Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster Powder coating, Sheet metal thickness : 1.60MM, ISI approved as per IS:15683:2006(Make: superimax/Cese fire/Minimax)
10
-
3680
Supplying, installing and commissioning of CO2 Type 4.5 Kg Fire Extinguisher containing Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, fittted with discharge hose, wall mounting bracket etc., Discharge Time less than 15 Secs, Controllable discharge mechanism, Range minimum 4 Meters, applicable on Class A,B,C and electrically started Fire, A Rating- 8A, B Rating 34B, Can Construction : Deep drawn & Co2 Mig welded, Valve Construction : Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster Powder coating, Sheet metal thickness : 1.60MM, ISI approved as per IS:15683:2006(Make: superimax/Cese fire/Minimax)
10
-
10426
Supply of 70 3 ½ Core 1.1KV Grade ISI Marked Alluminium Armoured Cable (Make-Polycab/Gloster/Nicco)
145
-
443
Supply & laying of 90 mm dia HDPE Pipe
120
-
355
250 amp PANEL BOARD
S/F of 250 amp panel board made of 16 SWG 2 mm C.R sheet with powder coated with provision of following items with fabrication erection testing and commissioning of total enclosed panel board of size ( 1.2 x 1.3 ) sq mtr with copper bus bar of 250 copper bus bar ,internal connection and provision for termination of incoming and outgoing cable ,earthing, danger board etc. as per direction of engineer- in- charge.
complete with supply and fixing of following switch gear .( MAKE-Legrand/Seimens/schneider)
INCOMING 1) 250 AMP 4P 36 KA MCCB, with thermal magnetic releasewith 125 amp auto mannual change over OUTGOING 2 nos of 63 amp DP Mcb , 2 nos 63 amp TPN Mcb 2 nos of 100 Amp 16 KA mccb
1
-
105856
P.H. WORKS:-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge
-
-
-
Ground Floor
-
-
-
20mm dia C - PVC pipe
55
-
225.7
25mm dia C - PVC pipe
60
-
303.6
32mm dia dia C - PVC pipe
65
-
438.1
First Floor
-
-
-
20mm dia C - PVC pipe
40
-
233.6
25mm dia C - PVC pipe
45
-
311.5
32mm dia C - PVC pipe
95
-
447.2
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.
-
-
-
On Roof of First floor
-
-
-
50mm dia PVC pipe
80
-
325.6
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)
41
-
861.3
15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make)
6
-
1255
15mm dia CP Bib cock(Jaquar-Medi series)FLR-CHR-5043N
8
-
2288.5
15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make)
15
-
1451.9
20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make)
10
-
1132
25mm dia brass full way valve (Shakti make)
8
-
926.1
32mm dia brass full way valve (Shakti make)
8
-
1355.6
50mm dia brass full way valve (Shakti make)
4
-
2551.3
15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make)
6
-
1648.7
Flush cock with wall flange (Jaquar make) (APR - ESS - 101081)
8
-
1427.3
15mm CP Extension piece
80
-
59.3
125mm CP grating
45
-
82.7
15mm size C.P. flange
80
-
40.3
Supplying all materials, labour, T&P and fixing Rotational molded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting up to a height of 5 meters above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete (1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge
-
-
-
2000 liter PVC water storage tank roof of first floor
8
-
35698.3
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.
-
-
-
Ground Floor
24
-
45
First Floor
18
-
45.9
Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge
-
-
-
Ground Floor
6
-
154.8
First Floor
6
-
155.5
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
-
-
-
Ground Floor
115
-
170.1
First Floor
85
-
174.9
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
250
-
387.1
75mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
60
-
194.1
110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)
29
-
225
110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
10
-
131.7
75mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
8
-
81.2
110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
40
-
72.3
75mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
12
-
49.4
110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
12
-
115.2
110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
8
-
38.4
110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make)
16
-
176.8
110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
29
-
115.2
110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
40
-
32.9
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
580mm size Orissa pan (Hindware/Parryware/Neycer make)
8
-
2225.9
Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
-
-
-
10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
14
-
1550.9
Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge
8
-
2641.5
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
-
-
-
European water closet with 'p' trap plain(Hindware/Parryware/Neycer make)
6
-
2576.7
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
-
-
-
Under Counter basin(560x450)Hindware-No.10095
14
-
3868.4
550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal
2
-
3902.9
Differently Abled series (1no)
-
-
-
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
-
-
-
550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal
1
-
3902.32
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
-
-
-
600mmx450mm size B.E mirror (swivelled type)
1
-
629.7
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge.SINGLE PIECE-WATER COLSET P TRAP - LYS-WHT-0204P
1
-
12008.7
SOAP DISPENSER WITH GLASS BOTTLE (Jaquar)ALD-BCH-769L250X190MI
1
-
2067.1
15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make)
1
-
1648.7
CP towel Ring(Jaquar)ACN-ACR-1121N
1
-
2091.7
Grab bar (Jaquar make) WAC - WHT - BAI 090
2
-
6299.7
450MM long Grab bar (Jquar make)AHS - CHR - 1507
2
-
1353.4
600mmx125mm plate glass shelf with CP/NP guard rails.
1
-
593.5
Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. Porcelin Sink (600 x 450 x 200)
2
-
4892.7
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
25mmx600mm long CP towel rail
10
-
694.9
Towel ring
10
-
462.1
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.
-
-
-
600mmx125mm plate glass shelf CP/NP guard rail
2
-
593.5
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
-
-
-
600mmx450mm size B.E mirror (fixed type)
2
-
657.6
Large Size mirror with Frame
11.34
-
1762.5
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
CP soap holder
34
-
175
Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.
-
-
-
½” x 5” CP Shower
10
-
480.6
Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
40
-
174.2
Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
20
-
109.4
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge
-
-
-
Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
8
-
8387.9
Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge
8
-
1393.4
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
-
-
-
Ground Floor
15.7
-
4366
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
-
-
-
Ground Floor
5.07
-
6123.6
First Floor
3.73
-
6424.1
Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( vetrified matt finished floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 60cmx60cm special printed series to be pre-approved by the Engineer-in-charge )
-
-
-
Kajaria tile 60cmx60cm
-
-
-
Ground Floor
60.74
-
1189.3
First Floor
37.26
-
1199.1
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
-
-
-
Ground Floor
164.95
-
151.9
First Floor
110.46
-
155.1
Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( vetrified wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 60cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge )
-
-
-
Kajaria glazed tile 60cmx30cm
-
-
-
Ground Floor
167.23
-
1111.4
First Floor
73.83
-
1126.3
Granite Tiles (10mm thick)for Counter top Basin
13.71
-
1796.8
Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.
64.77
-
3430.6
Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge
175.16
-
1114.3
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 120 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 120 liter's along with 3 noa of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge
-
-
-
Aqua guard pure Chill 120 PSS UV
4
-
101295
Supplying all materials, labour, T&P and providing brick work in super structure with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
Ground Floor
2
-
4348.4
First Floor
2
-
4381.7
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge
-
-
-
100mm dia P.V.C. pipe
29
-
1045.9
150mm dia P.V.C. pipe
40
-
1698.2
Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification.
-
-
-
MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover )
8
-
16333.4
Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
3
-
18769.1
Supplying all materials, labour, T&P & constructing mesonary drain of size 0.30mtr x 0.45mtr drains as per P.H. design & specification including lead of all materials to site.
7
-
2429
Construction of 50 users RCC septic tank- 2Nos
-
-
-
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.
55.9
-
204.22
Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.
11.18
-
219.22
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
6.16
-
278
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
6.16
-
4742.2
Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
In ground floor (inside/outside)
63.36
-
155.7
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
In ground floor (inside/outside)
63.36
-
32
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
R.C.C floor and roof slabs up to 4.30m height
20.68
-
437
R.C.C beams,columns,girder and bressmer etc.
147
-
741.5
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
In ground floor
23.52
-
8537.2
Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
23.52
-
6823.2
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
In ground floor
1.6
-
6123.6
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
In ground floor
10.56
-
151.9
Supplying all materials, labour, T&P and providing brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
In F&P
1.2
-
4348.7
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
12
-
151.4
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
11.38
-
113.46
1 no 30,000ltr R.C.C. Sump (6.00x2.50x3.00)
-
-
-
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.
54
-
204.22
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft.
36
-
219.22
Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.
20.78
-
113.46
Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge
3.15
-
278
Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 40mm size crusher broken hard black granite metal including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
3.15
-
4742.2
Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.
13.47
-
6823.2
Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
14
-
8537.2
Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge
-
-
-
RCC floor, roof slab chhaja up to 4.430 m height
49.2
-
437
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
111.36
-
163.2
Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge
56.71
-
32
Supplying and fitting and fixing stainless steel 34 grade in said rail using 5mm dia 2mm thick circular pipe and balustrade 32mmx32mmx2mm at the rate of mtr.Center to center and square pipe 32x32x2mm below including welding with stanless steel elect rod and fixing with necessary accessories etc.complete as per direction of the Engineer-in-charge.
60
-
323.7
Providing fitting and fixing RCPC cover etc complete as per direction of Engineer-in-charge
2
-
1093.1
Rain Water Harvesting System
-
-
-
Supplying all materials, labour, T&P and fitting and fixing U-PVC, SWR soil waste ventilating pipes and fitting of the following outside diameter conforming to 13592/1992 to walls with nails bobbins and wooden plugs or laying in trenches including with supply of approved rubber lubricant by non-heat application method as per manufactures specification testing earth work in excavation in all kinds of soil and refilling of trenches all complete as per specification and direction of the Engineer in charge.
-
-
-
110mm U-PVC SWR Pipe
40
-
387.1
110mm U-PVC Plain bend
8
-
72.3
110mm U-PVC Plain tee
8
-
115.2
110mm dia GI clamp
20
-
52.5
125mm dia CP grating
4
-
82.7
Supplying all materials labor T&P and binding glazed stone ware pipes and aligning to requisite gradient inside the trench to jointing with tarred cascade and cement motor prop.(1:1 )encasing the pipe all around with CC(1:3:6) with washed gravel CC(1:4:8) with hard stone metal size 25mm to 50mm on bed on the trench lowering the pipe to bed on trenches in earth work in excavation trenches in all kinds of soil and refilling the same in 30mm layers watering ramming and removal of surplus earth disorient sewer line including use of T&P sight rails binding rods plug lights etc .all complete as per P.H .Specification. All round concrete encasing up to 1.50metre depth.
-
-
-
160mm dia P.V.C.
55
-
1698.2
Supplying all materials labour T&P and constructing 1.80m dia x 2.60 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
2
-
40137.7
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge
-
-
-
Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
4
-
8387.9
Pump House of size 8'-0''x8'-0''
-
-
-
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.
7.57
-
204.22
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
1.72
-
4366
Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.
0.95
-
6823.6
Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge.
10.89
-
4566.1
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:6) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
47.66
-
139.7
Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
1
-
8537.2
Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge
-
-
-
RCC floor, roof slab chhaja up to 4.430 m height
7.02
-
437.2
Supplying all materials, labour, T&P & providing 2.5cm thick A.S. flooring with cement concrete (1:2:4) 12mm hard broken granite chips including conveyance of all materials, watering curing payment of royalty taxes etc. all complete as per direction of Engineer-in-charge.
5.76
-
298.7
Supplying all materials, labour, T&P & providing 2.5cm thick D.P.C. flooring with cement concrete (1:2:4) 12mm hard broken granite chips including conveyance of all materials, watering curing payment of royalty taxes etc. all complete as per direction of Engineer-in-charge.
3.68
-
288.2
White washing two coats with approved good stone lime over the interior surface of the walls and celing inculding all labour charges cost and conveyance of all materials, taxes and cost of indigo glue with T & P etc complete in all respect in frist floor and as per direction of the Engineer -in- charge
54.16
-
12.2
Supplying fitting, fixing in position angle iron window frame made out of 35mm x 35mm x 5mm, M.S. angle with required nos. of hinges and steel shutter made out of 25mm x 25mm x3mm, M.S. angle fitted with 20 gauge G.P. sheet/ steel plate and welded with tower bolt, handle hold fast & M.S. flat of 19mm x 3mm & welded with entire grill on windows and one coat of red oxide primer and fixing with C.C. (1:3:6) using 12mm size HBG CB Chips and making good to the damages and finishing the exposed surface smooth with watering curing etc. as per direction of the Engineer-in-charge.
103
-
85.37
Construction of 2nos production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories
-
-
-
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
-
-
-
Drilling of 200mm dia bore
-
-
-
00 mtr to 30mtr
60
-
755.48
30 mtr to 45mtr
30
-
836.28
Drilling of 150mm dia bore
-
-
-
45 mtr to 215.00mtr
340
-
554.49
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
-
-
-
Lowering of 200mm dia P.V.C casing pipes
-
-
-
00 mtr to 30 mtrs
60
-
138.2
30 mtr to 60mtr
30
-
138.2
Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.
-
-
-
200mm dia PVC (sch-80) pipe
90
-
1633.8
Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)
2
-
789.8
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
-
-
-
By DTH Rig
2
-
4994.8
Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation:
-
-
-
Rocky terrain with boulder formation for 300m depth
4
-
1122.11
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make)
-
-
-
1 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby)
3
-
16737.2
DOL Control panel
3
-
3805.5
40mm dia steel short piece
2
-
152.3
Well cap
2
-
152.3
50mm size CI bracket
2
-
91.3
2.50sqmm flat cable
280
-
128.5
20mm dia rigid UPVC pipes
90
-
6.9
Steel rope with cover
90
-
26.7
Labour charges for lowering including transportation
3
-
2000
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge
-
-
-
32mm HDPE pipes (Finolex/Supreme make)
180
-
99.8
Approved for 103 (One hundred three items only)
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements