Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
Refer DocumentsDocument Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_EICCL_75790_1Bid Award Id
ViewTender No
E E R AND B PLB 37 2021 22Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Detailed Tender Call Notice
BOQ Items
Cement concrete of proportion (1:3:6) in foundation and floors using 4cm (3/2”) size clean hard black Crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm (6”) thick to the required level, ramming, watering and curing etc. complete including cost and conveyance of all materials with royalties and all labour with T&P required for the work etc. complete including dewatering if required.
11.72
-
4681.07
Providing Fly Ash brick masonry work in Foundation and Plinth using (250mm x 120mm x 80mm ) size bricks having crushing strength not less than 75Kg / Sqcm in cement mortar (1:6) for brick masonry walls after immersing the bricks for minimum 6 hours in water before use with all necessary projections, splays cutting, circular moulding, corbelling etc as per drawings including cost, conveyance, royalties, loading and unloading of all materials and all labour for work including scaffolding, watering and curing, sundries, T&P etc. complete as per the direction of the Engineer-in-charge.
65.04
-
4351.16
Providing, lifting, hoisting and laying Reinforced cement concrete of M-20 grade in following items as per approved designs and drawings having a minimum compressive strength (in work test) 200 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 10 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.
-
-
-
Column Footing
51.12
-
4990.43
Column
10.4
-
10651.05
Grade Beam/Plinth Beand
13.2
-
5343.9
Lintel
1.14
-
8506.02
Beam
6.69
-
10651.05
Roof Slab
24.04
-
9093.37
Chajja(0.065mt thick)
10.69
-
782.52
Stair case
2.48
-
10172.41
Supplying and Straightening bent up or coiled rods, cutting, bending, crancking hooking welding or jointing (if required) the Tor Steel of SAIL/RINL/TATA/JINDAL/SHYAM STEEL make with binding wires and binding tying the grills, hoisting, lowering & placing in proper position as required for all types of R.C.C. works including cost, conveyance of steel and binsding wire of of 18 to 20 gauge and labour with T & P required for the work etc. complete in all floors (weight of binding wires will not be considered for payment , and payment will be made on weight of Tor Steel Only.
180.13
-
8504.91
Providing Fly Ash brick masonry work in Superstructure using (250mm x 120mm x 80mm ) size having crushing strength not less than 75Kg / Sqcm in cement mortar (1:6) for brick masonry walls after immersing the bricks for minimum 6 hours in water before use with all necessary projections, splays cutting, circular moulding, corbelling etc as per drawings including cost, conveyance, all royalties, loading and unloading of all materials and all labour for work including scaffolding, watering and curing, sundries, T&P etc. complete as per the direction of the Engineer-in-charge.
-
-
-
Ground Floor
121.91
-
4384.49
First Floor
24.2
-
4649.38
Providing Fly Ash brick masonry work in Superstructure using (250mm x 120mm x 80mm ) size having crushing strength not less than 75Kg / Sqcm in cement mortar (1:4) for brick masonry walls after immersing the bricks for minimum 6 hours in water before use with all necessary projections, splays cutting, circular moulding, corbelling etc as per drawings including cost, conveyance, all royalties, loading and unloading of all materials and all labour for work including scaffolding, watering and curing, sundries, T&P etc. complete as per the direction of the Engineer-in-charge.
5.96
-
4572.04
Providing 16mm thick cement plaster to the surface of brick masonry wall in cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance,Royality, loading and unloading, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge.
802.3
-
200.29
Providing 12mm thick cement plaster to the surface of brick masonry wall in cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, Royality,loading and unloading, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge.
690.24
-
140.76
Providing 6mm thick ceilling cement plaster in cement mortar (1:4) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, Royality,loading and unloading, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge.
152.24
-
154.59
Supplying fitting and fixing in position well dressed and well seasoned Sal wood work framed and fixed (wrought and put up) in choukaths for doors windows and ventilators including cost of iron work and coal tarring 2 coats to wall side faces of choukaths including cost of coal tar, cutting grooves and mending sizes where necessary with cost and conveyance of all materials and labour with T&P required for the work etc. complete in all respect in all floors.
0.5
-
50073.59
Providing fitting & fixing of 32mm thick Piasal wood or Local Teak wood panel door shutter including all door fitting materials and cost conveyance of all materials labour and T & P requred for the work. Etc. comploete as diredted by E.I.C
12.6
-
4124.65
Supplying of M.S. Grill/ Pipe/Gate of approved quality and design to windows and openings & stair case railing and parapet railings etc. including making holes in walls and RCC structures or wood work etc. in proper position making good the damages of walls or RCC or other structures complete including mending or cutting sizes or grooves in choukaths with cost and conveyance of all materials, labour with T&P required for the work etc. complete ( including screws) in all respect in all floors. as diredted by E.I.C
2717.77
-
66.37
Supplying of M.S. shutter/Gate of approved quality and design to windows and openings & stair case railing and parapet railings etc. including making holes in walls and RCC structures or wood work etc. in proper position making good the damages of walls or RCC or other structures complete including mending or cutting sizes or grooves in choukaths with cost and conveyance of all materials, labour with T&P required for the work etc. complete ( including screws) in all respect in all floors. as diredted by E.I.C
243
-
80.89
Labour for fitting & fixing M.S. Grills/shutter, M.S. gate will of approved quality and design to openings in proper position including making holes in walls RCC structure and wood work etc and making good to the damages to walls or R.C.C. structure including mending or cutting to sizes or grooved in walls and fixing with R.C.C. (1:2:4) with hard black broken granite stone chips of 12mm to 20mm (1/2” to ¾”)(20mm not to exceed 25%) with cost and conveyance of all materials, labour and royalties with all T&P etc. complete. In all floors.
51.31
-
67.4
Supplying and fitting-fixing of Un-Plasticised poly Vinyl Chlorider (UPVC) (FENESTA/NCL/VEKA LTD.) Three Track. Three Panel sliding window -60- Series duly manufactured using UPVC reinforced profiles of 108mm x 45mmx2.5mm for outer frames and window sash of 39mmx 58mm x 2.5mm capable of mounting single glasing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefabricated & welded through fusion weiding the window frame shall be fitted wiht 6mm thick clear tougheried glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reainforced Large Coupler at the site using anchor fasteners silicon rubber sealant easy galzing/ deglazing at site etc. including cost and conveyance of all materials accessories labour charges, materials and product conforming to ASTM D 638-14 EN-477-95 and other applicable codes and standards.Including cost, conveyance, all labour T&P etc complete as per direction of Engineer-In-charge.
16.2
-
5984
Sipplying fitting fixing of 5mmthick black glass in ventilator over door as panel fited with rubber beading , including the cost of all materials, cost of all labour, conveyance, loading, unloading, sundries, T&P, etc. complete as per the direction of the Engineer-in-Charge.
2.7
-
585.76
Providing and laying 600 mm x 600 mm Non-Skid vitrified tiles of colour series of approved quality premimum grade of 8mm to 10mm thickness (Kajaria/Johnson) in Floor Tiles colour serise of without any warpage laid over an under layer of 25 mm thick base of cement mortar (1:1) (1 cement: 1 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.
129.8
-
1003.55
Providing fitting and fixing of precast vitrified tiles colour series(Kajaria/Johnson) of approved quality premimum grade of 8mm to 10mm thickness in dadoes skirting and risers to steps on 12mm thick cement plaster in C.M (1:3) jointed with cement slurry mixed with pigments to match the shades of the tiles including finished smooth watering and curing with cost, conveyance, royalities of all materials all labours T&P required for the work etc. complete in all respect as per the direction of E.I.C.
21.53
-
1027.44
Providng fixing and fitting Granite tile (black) of 10mm thick of size , area above 0.1 sqm&up to 0.4 sqm in floors on Treads of approved quality in 25mm thick Bed of Cm (1:1) jointing with neat and cement slushy mixed with pigment to match the shade of the tiles etc complete with cost,conveyance, Royalities, of all materials usedr the work,all labour T&P etc in all respects
21.78
-
1508.75
Providing & applyiing wall primer priming coat aproved brand and manufacture etc including cost, conveyances, of wall Primer& all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.
1512.37
-
59
Finishing plastered surface with wall cement based wall putty (wate based) to receive primer etc including cost, conveyances, of wall cement putty & all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.
638.95
-
66.32
Painting 2 (two) coats with any approved colour weather coat to out side surface of wall of approved shade and quality etc including all cost of weather coat, conveyance, all labour T&P etc complete as per direction of Engineer -in- charge.
873.43
-
71.67
Wall painting two coat with P.E paint including cost conveyance P.E Paint and all materials labour & T&P require for the work etc. complete as directed by E.I.C.
638.95
-
77.33
Painting two coat with enamel paint over a coat of priming to iron surfaces including cost conveyance of Anamel Paint &Primer and all materials labour & T&P require for the work etc. complete as directed by E.I.C.
75.7
-
189.31
Supplying, fitting and fixing of Tata make( Durashine) colour tin sheet 0.5mm thick or equivalent, heat resistant , specially colour coated Sheet for roofing including cost, conveyance of all materials, labour and T&P require for the work etc. complete as directed by E.I.C.
24.46
-
741.98
Supplyin fitting and fixing steel of 304 grade in hand railling using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @0.90 mtr C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved disign . including conveyance of all materials and royalties etc with all labour and T&P required for the work complete including side shuttering.
62.88
-
303.83
Supplying, Fitting and Fixing Gypsum Board ceilling with Aluminium anodized T section No 1705 with 2 ft center to center,L section No 1705 upto 15 micron on walls to be fixed by means of steel screws and P.V.C plug and the Al.grid 2'x2' with Gypsum Board including cost, conveyance of all materials, all labour T&P etc complete as per direction of Engineer -in- charge.
88.39
-
760.08
Cement concrete of proportion (1:2:4) using 12mm size clean hard black crusher broken granite stone chips of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm (6”) thick to the required level ramming, watering and curing etc. complete including cost and conveyance of all materials with and royalties and all labour with T&P required for the work etc. complete including dewatering if required.
33.31
-
5970.94
Providing 20mm thick grading plaster in C.M (1:4)over roof slab including cost, conveyance ,Royality of all materials, labour and T&P required for the work etc. complete as directed by the EIC.
154.71
-
220.08
Back filling of surplus exacavated earth at work site by intial lead of 50.00 mtr including cost, conveyance of all materials, labour and T&P required for the work etc. complete as directed by the EIC.
74.37
-
104.88
Supply fiitting fixing of 100mm dia PVC rain water pipe including cost, conveyance of all materials, labour and T&P required for the work etc. complete as directed by the EIC.
70
-
180
Supplying & fixing of 750mm dia rezer wire concertina coil with 6mt (equivalent to 50 spirals) length coils clipped with two nos. of straiht line razer & fixing U shape MS angle of size 50x50x6mm providing in the distance of 2.5mt. Center to center and seven row of razor barbed tape & grouted on the wall and welded with spike grills for rigid fixing with CC (1:2:4) in position including all required scaffolding where ever necessary and clearing the site & Painting two coat over a coat of priming to MS Angle/Grill with all cost of materials labour, fabrication , conveyance, etc. complete as per direction of E.I.C .
102
-
800.89
INTERNAL PH Works
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.
-
-
-
Ground Floor
-
-
-
20mm dia C - PVC Pipe
26
-
112.3
25mm dia C - PVC Pipe
36
-
148
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
CP Angle Stop Cock (Essco Make)
9
-
664.4
20 mm dia CP Concealed stop cock (Essco/Johnson/Jaquar Make)
4
-
1033.5
CP Long Body Bib Cock (Essco Make)
8
-
1033.5
25mm dia Brass FW Valve (Essco Make)
4
-
922.6
CP Extension Piece
18
-
59.3
125mm CP Grating
7
-
80.4
C.P. Flange
18
-
40.3
Health Faucet
2
-
686
25mm dia CP Two Way Bib Cock (Essco/Johnson/Jaquar Make)
2
-
910.5
Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge
-
-
-
1000 liters capacity PVC water storage tank at roof
2
-
21134.5
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.
16
-
43.8
Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge
17
-
151.9
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
28
-
158.1
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
27
-
379.3
110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)
2
-
225
110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
12
-
131.7
110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
12
-
72.3
110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
8
-
115.2
110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
2
-
38.4
110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
8
-
115.2
110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make)
8
-
137.2
110mm U-PVC Socket plain (Ori Plast/Finolex/Supreme Make)
12
-
32.4
Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
-
-
-
10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
4
-
1546.5
Supplying all materials, labour, T&P and fixing vitreous china water closet,European wc) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
European water closet Orissa pan (Hindware/Parryware/Neycer make)
2
-
2542.8
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
-
-
-
Orissa Pan with Trap
2
-
2534.8
Supplying all materials,labour,T&P and fixing bowl pattern urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge.
-
-
-
Half Stall Urinal
2
-
4485.6
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
-
-
-
550mmx400mm W.H.basin (Jaquar/ Johnson make)with 15mm dia C.P. pillar cock with pedestal
3
-
3861.5
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
CP towel rail (Plaza/ Johnson Make)
4
-
684.3
Towel ring (Plaza/ Johnson Make)
3
-
419.4
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
-
-
-
BE Mirror Wallmount (Best quality)
3
-
609.2
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
CP soap Dish
9
-
664.4
Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.
-
-
-
CP Revolving shower with shower arm
4
-
910.2
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge
-
-
-
Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
3
-
8201.7
Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge
5
-
1378.5
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.
1.5
-
6260.4
Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed series to be pre-approved by the Engineer-in-charge )
-
-
-
Vetrified tile 40 cmx 40cm -Ground Floor
21.47
-
1159
Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge )
-
-
-
Glazed tile 40cmx25cm- Ground Floor
69.89
-
1084.3
Supplying fitting and fixing 30mm thick Solid panel ACP shutter consisting of frame made out of MS tube of 19 gauge thickness and size of 19mmx19mm for stile & 15mmx15mm for top and bolt rails set with aluminium door frame(Choukatha)of size 50mmx47mm is made out of 5cm thick sheet properly joined with solvent cement adhesive as per section view with MS square tube of 19mm of 19mm gauge to be inserted inside to give extra structural strength the price is inclusive of all cost of all materials labour,T&P etc.complete in all respect as per direction of the Engineer-in-charge.
9.45
-
3787.5
EXT. PH WORKS
Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification.
-
-
-
MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover )
2
-
15984.1
Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
2
-
18608.5
Fitting & fixing of Aquagurad Cooler Cum Purifier for drinking water privision.
-
-
-
Cost of Aquaguard Cooler - Cum Purifier
1
-
48500
Construction of 01 no 30 users Septic Tank
-
-
-
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.(3.6m x 2.4m x 1.5m) Cum
12.96
-
201.63
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial lift..(3.6m x 2.4m x 0.45m) Cum
3.89
-
216.44
Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC..(3.6m x 2.4m x 1.5m) Cum- 3.6m x 2.4m x 0.45m) Cum
9.75
-
277.3
Supplying all materials, labour, T&P and providing cement concrete ( (1:2:4) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
1.74
-
6260.4
Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.(2.3m x 0.15m x 1.5m x 4 + 2.3m x 2.3m x 0.12m x 2) Cum
0.83
-
6603
Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.Steel at 1.3% of concrete= (3.34 x 1.3 x 78.5 / 100) Qntl
0.78
-
8053.4
Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge
-
-
-
RCC floor, roof slab chhaja up to 4.430 m height
2.53
-
434.2
Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB brick having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge.
8.77
-
4606.5
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
42
-
153.7
Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge
16.8
-
31.2
Supplying all labor T&P & filling foundation and plinth with Sand well watered & rammed etc. all complete as per direction of Engineer-in-charge
1.19
-
281.5
Construction of 1 Nos production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer(DTH) drilling rig or combination rig with PVC pipe and installation of submersible pump set with all accessories
-
-
-
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
-
-
-
Drilling of 200mm dia bore
00 mtr to 30mtr
30
-
755.48
31 mtr to 45mtr
15
-
836.28
Drilling of 150mm dia bore
46 mtr to 176 mtr,
130
-
554.49
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
-
-
-
Lowering of 200mm dia P.V.C casing pipes
00 mtr to 30 mtrs,
30
-
76.84
Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.
-
-
-
200mm dia PVC (sch-80),
15
-
1735.5
Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)
1
-
1009
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
-
-
-
By DTH Rig
1
-
2923.5
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make)
-
-
-
1 H.P. Single phase/ three phase 3 stage head range of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm
1
-
16737.2
DOL Control panel
1
-
3805.5
40mm dia steel short piece
1
-
152.3
Well cap
1
-
152.3
50mm size CI bracket
1
-
91.3
2.50sqmm flat cable
110
-
128.1
20mm dia rigid UPVC pipes
105
-
41.5
Steel rope with cover
110
-
26.7
Labour charges for lowering including transportation
1
-
2040.2
EI WORKS
Recessed wiring to light points / fan points/ Exhaust fan / call bell point with 1.5mm2 FRLS PVC insulated SC multistrand copper conductor of ISI marked (Finolex/ Polcab/KEI/ Anchor) with 20mm dia non-metalic PVC flexible conduit (Make- AKJ/ KINJAL/ POLYCAB/ ANCHOR) with 5/6Amp., 250V Modular switch ISI marked and ceeling rose of ISI marked (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze) mounted an Modular G.I. box with Modular base and cover of suitable size (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze), with 1.5sq.mm FRLS PVC insulated single core multistrand Cu. condoctor as earth wire including all accessories and connection. As per direction of Engineer in Charge. (Make of wire Finolex / L&T/ Anchor / KEI/ Polycab/ V-Guard)
-
-
-
Group-A
12
-
543
Group-B.
21
-
768
Group-C.
36
-
1050
Supply and fixing of 6Amp 3Pin modular socket with 6Amp modular switch on existing board. (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze.)
9
-
222
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze.)
2
-
502
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze.)
3
-
637
Supply and fixing of 3 nos. of 3 pin 5/6 amp modular socket and S.P. 5/6 amp one way modular switch, 1 no. of 5 pin 15/16 sockety out let and S.P. 15/16 A one way modular switch on modular G.I. Box with modular base and cover. (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze.)
3
-
1506
Recessed wiring to submain in the following sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metalic heavy duty flexible conduit 1.6mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required. (Make of wire Finolex / KEI/ Polycab/ L&T/ Anchor)
-
-
-
a) 1x1.5mm2 for Inverter wiring.
41
-
46
b) 2x1.5mm2 + 1x1.5mm2. in 20mm dia
60
-
126
c) 2x2.5mm2 + 1x1.5mm2. in 20mm dia
122
-
140
d) 2x4mm2 + 1x1.5mm2 in 20mm dia
55
-
157
e) 4x6mm2 + 2x2.5mm2 in 32mm dia
17
-
287
Supply and Fixing of three pole and neutral, sheet steel, MCB distribution, 415V on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, inter connections, phosphatized and powder painted including earthing etc. as required (But with out MCB/ RCCB / Isolator) (Make- L&T/ Legrand/ Schneider/ ABB)
-
-
-
a) 4 Way (4+12) Double Door, Horizontal Type)
1
-
2157
Supply and fixing of 5amp to 32 amp rating 240V "B" series miniature circuit breaker suitable for lighting and other loads of the following poles in t he existing MCB DB ISI marked complete with connections testing and commissioning etc. as required. (Make-- Havells/ Legrand/ L&T/ C&S)
-
-
-
a) 6Amp rating to 32Amp (SP) MCB
12
-
192
b) 40Amp (4P) MCB
1
-
1591
supplying and fixing of call bell / buzzer ISI marked suitable for DC / AC single phase 230 volts complete as required.
1
-
119
S/F of 1200mm High speed Ceiling fan, Heavy Duty, Durable, Copper winding, Aluminium blade (ISI Mark)
(Usha Striker/ / Cromton AURA/ Havells SPARK Deco/ Bajaj Elegance Ivory make) Orient Qusar ornamental. Rate Rs.2015.00
Fixing with all materials 320.00 2335.00
10
-
2335
S/F. of 5Step Modular electronic type Fan regulator of Anchor/Cona make.
10
-
474
S/F. of 1x18Wt. LED tube light fiting (C&S, Philips, Havells) make.
12
-
555
S/F. of 15Wt. Surface/ Recess Circular down light LED fitting (Philips / Panasonic / Havels) make.
12
-
1242
S/F. of 18Wt. 210 x 210mm LED Round / Square recessed fitting (Philips / Panasonic / Havels) make.
8
-
1692
S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose.
10
-
16
S/F of 9Wt. LED lamp of reputed (Make: Philips/Havels / C&S)
10
-
170
S/F of CFL type BH fitting with lamp (Make- C&S/Philips / Havells)
6
-
602
S/F. of 45Wt. LED Street light fittings complete with G.I. Bracket (Make- Havells / C&S/ Philips)
3
-
5900
S/F. of 90Wt. LED Street light fittings complete with G.I. Bracket (Make- Havells / C&S/ Philips)
2
-
10406
S/F of 300mm Exhuast Fan of Usha/Khaitan make.
3
-
2134
S/F of copper plate earthing (600 x 600 x 3.15mm) with running copper flat 25 x 5mm from copper plate to funnel of 40mm dia G.I pipe including all accessories.
1
-
10380
Supplying and laying 8SWG copper wires ISI marked at 0.5meter bellow ground level for conductor earth electrode including soldering etc as required.
10
-
55
Supply of PVC Al. Armored cables ISI marked. (Make- Glowstar/ Polycab/ Nicco/ KEI as per Letter No- 309 19.01.2011 of SEEC (R&B) Odisha)
-
-
-
a) 25sq.mm 3 1/2 core
40
-
182
S/F of Inverter UPS 1600VA (Make- Microtek/ Su-kam/ Luminous).
1
-
10000
S/F of Inverter Battery 12Volt., 150h (Make- Exide/ Amron/ Su-kam/ Luminous with 48month warranty)
2
-
15000
S/F of Inverter Stands (Make- Microtek/ Su-kam/ Luminous).
1
-
1000
S/F of 1.5 Ton 3star rated Copper Split type A.C Machine (Make Hitachi/ Carrier/ Voltas).
1
-
43375
S/F of 1.5 Ton Copper Split type A.C Machine of 3 Star rated (Make Voltas / Carrier make.
1
-
45000
Installation charges of Split type A.C. Machine.
1
-
1500
S/F of 5 KVA Stabilizer (90V-270V) of V-Guard / Autotake / CG.
1
-
9500
S/F of Extra Copper pipe for AC Machine.
2
-
446
S/F of insulation foam for cover copper pipe.
2
-
30
S/F of 15A. Top (Make- Cona / Anchor)
1
-
92
Supply, Installation, Testing and commissioning ABC (Powder type) 6 Kg. Capacity Fire Extinguisher, Mild Steel Cylindres ISI marked TAC approved fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged with ABC powder (Mono Ammonium Phosphate) pressured by Nitrogen complete in all respects including wall suspension bracket and conforming to IS: 1349-1993 as required as per specifications. (Fireshield/ Eversafe/ Safex/ Safeguard).
1
-
4500
SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF INDOOR PANNEL BOARD WITH DANGER BOARD. (S/F OF 125A. PANNEL BOARD 30"x30"x10") a) 16/18 SWG PANNEL BOX 30"x30"x5"= sq.inch for single door made out of CR sheet of 16SWG and boarder angle frame to provide above pannel with proper space, hinges and other accessories, hinged door must be painted one coated red oxide and two coat enamel gray paint 4320sq.inch @1.51. b) Supply and fixing of internal wiring to equipment installed in the pannel board with required size of copper multistrand sinlge core cables duly crimped with copper lugs and all connections 30" x 30" including cost of copper conductor and other fittings like gasket, screw, nut and bolt, insulating materials etc. 864sq. inch@ 0.87. c) S/F of Bus bar (25x5)mm with required size of insulating materials nut & bolts.5mtr.@494 d) S/F of 63AMP. 4P 25kA MCCB of L&T / Siemens / Legrand make.1no@7,335.e) S/F of DN4 Extended Rotary Handle. 1no.@3,977 f)S/F of Spreader Terminal DN0-100 - 4Pole. 1no.@408g) S/F of Ammeter with selector switch including all connections.1no.@1,398h) S/F of Voltmeter with selector switch including all connections.1no.@1,398 l) S/F of indicator lamp with toggler switch and fuse.3nos.@242m) j)S/F of CT coil upto 400AMP. Including all connectios.3Nos.@860n) S/F of 40A. DP MCB make (L&T / Siemens / Legrand) 6nos.@803. K) S/F of 40A. 4P MCB make (L&T / Siemens / Legrand) 1nos.@1,591.p) S/F of 63A 4Pole change over switch make (L&T / Siemens / Legrand) 1no.5662
1
-
38320
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements