Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 8,61,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_EICCL_87307_9Bid Award Id
ViewTender No
CCENC (R AND B) /23/ 2022-23Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.50m initial lift including rough dressing breaking clods maximum 5cm to 7cm & laying in layers not exceeding 0.3m depth for the work complete including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of the water pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge.
1905.33
350785
184.11
... More
Filling in foundation trenches and plinth, with excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-in-charge.
635.11
64960
102.28
... More
Filling site with earth obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet the requirement including cost of all labour,T&P completed as directed by the Engineer-in-charge.
1533.9
156889
102.28
... More
Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour,labour cess, sundries, T&P required for the work etc. complete in all respect as per direction by the Engineer in charge. (Measurement will be taken on finished compacted section only).
934.12
700775
750.2
... More
Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for PRE CONSTRUCTIONAL Anti-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (plinth area of the building at ground floor only shall be measured for payment).
1835.9
253758
138.22
... More
Providing and lying plain cement concrete of proportion (1:3:6) in foundation and floors using Portland slag cement (PSC) with 40 mm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per the instruction of the Engineer-in-Charge.
107.96
537138
4975.18
... More
Providing and lying plain cement concrete of proportion (1:3:6) in foundation and floors using Portland Slag Cement (PSC) with 12mm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge.
148.25
840387
5668.59
... More
Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.
-
-
-
... More
Footing
471.63
2643857
5605.81
... More
Column up to Pl Lvl
54.36
304743
5605.81
... More
Tie/Plinth Beam
119.51
715069
5983.21
... More
Column up to Roof Lvl :-
-
-
-
... More
Ground Floor
74.13
974147
13141.07
... More
First Floor
88.96
1313784
14768.92
... More
Second Floor
8.42
140831
16717.92
... More
LINTEL :-
-
-
-
... More
Ground Floor
35.09
328144
9350.77
... More
First Floor
8.52
87112
10220.56
... More
Second Floor
0.55
6215
11259.89
... More
CHAJJA:-
-
-
-
... More
Ground Floor
48.3
41042
849.75
... More
First Floor
29.07
27752
954.68
... More
Second Floor
4.32
4666
1080.3
... More
ROOF BEAM:-
-
-
-
... More
Ground Floor
119.51
1570523
13141.07
... More
First Floor
119.51
1765072
14768.92
... More
Second Floor
6.57
109860
16717.92
... More
ROOF SLAB:-
-
-
-
... More
Ground Floor
275.39
2740666
9952.13
... More
First Floor
270.27
2957329
10942.19
... More
Second Floor
17.88
216846
12125.84
... More
STAIRCASE:-
-
-
-
... More
Ground Floor
35.16
390575
11108.98
... More
First Floor
41.26
508735
12330.42
... More
LIFT WALL:-
-
-
-
... More
Ground Floor
21.43
215864
10073.02
... More
First Floor
8.13
90139
11087.26
... More
Second Floor
8.13
99998
12299.93
... More
Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.
-
-
-
... More
Ground Floor
1502.52
13170917
8765.91
... More
First Floor
707.7
6221228
8790.75
... More
Second Floor
54.09
476867
8816.83
... More
Fly Ash brick masonry in cement mortar (1:6) in foundation & plinth using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
747.84
3361306
4494.68
... More
Fly Ash brick masonry in cement mortar (1:6) in super structure using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
-
-
-
... More
Ground Floor
511.34
2317919
4533.01
... More
First Floor
500.69
2409134
4811.6
... More
Second Floor
18.16
93185
5131.9
... More
Fly Ash brick masonry in cement mortar (1:4) in super structure using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
-
-
-
... More
Ground Floor
33.8
159872
4729.68
... More
First Floor
44.86
224662
5008.24
... More
Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Ground Floor
956.74
140937
147.31
... More
First Floor
1296.53
198459
153.07
... More
Second Floor
348.56
55462
159.12
... More
Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Ground Floor
2223.88
467020
210
... More
First Floor
3857.64
829957
215.15
... More
Second Floor
309.29
68181
220.44
... More
Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Ground Floor
1867.4
302831
162.17
... More
First Floor
1830.86
304295
166.2
... More
Second Floor
128.22
21843
170.36
... More
Supplying, fitting and fixing vetrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm Color / Printed series (Homogenous) of approved make (OASIS / SOMANY/ KAJARIA or equivalent) in floors on 20mm thick bed of C.M. (1:4) (1cement:4course sand) and filling the joint with white cement mixed with pigment to match the shades of the tile including cost of all materials, labour, labour cess, T&P etc. required for the work complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Ground Floor
1080.94
1047668
969.22
... More
First Floor
832.05
814956
979.46
... More
Providing, fitting, fixing vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm Color / Printed series (Homogenous) of approved make (OASIS / SOMANY/ KAJARIA or equivalent ) as directed by Engineer-in-charge in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties of all materials all labour,labour cess complete in all respects.
-
-
-
... More
Ground Floor
128.67
138027
1072.75
... More
First Floor
82.02
89247
1088.15
... More
Providing and fixing 20mm thick mirror polished granite stone slab, machine cut stone (sample of granite should be approved by EIC) for kitchen platforms, vanity counters, facias and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge, making gas pipe hole etc. laid over 25mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights. In all floors and all heights.
-
-
-
... More
Ground Floor
273.58
606438
2216.7
... More
First Floor
75.62
168389
2226.9
... More
Supplying, fitting & fixing of Granite Tiles of minimum Above 0.4 sqm (20mm. thick) of approved make in dadoes laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete incl. rubbing as per direction of the Engineer-in-charge
-
-
-
... More
Ground Floor
10.32
23944
2320.2
... More
First Floor
13.35
31187
2335.6
... More
Providing and laying anti-skid Matte Finish Vetrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 300mm x 300mm plain (Ivory) of approved make (OASIS / SOMANY/ KAJARIA or equivalent ) in floors on 20mm thick bed of C.M. (1:4) (1cement:4course sand) and filling the joint with white cement mixed with pigment to match the shades of the tileincluding cost of all materials, labour, labour cess, T&P etc. required for the work complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Ground Floor
12.07
11698
969.22
... More
First Floor
49.45
48430
979.46
... More
Fixing of Ceramic Glazed Wall Tiles of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753 of size 30cm x 20cm / 20cm x 20cm special plain / printed series in dados skirting & riser of steps on 12mm thick cement plaster 1:3 joined with neat cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, royalties of all materials, labour with T&P complete in all respects as per direction of Engineer-in-Charge.
-
-
-
... More
Ground Floor
1057.64
806190
762.25
... More
First Floor
469.14
364825
777.65
... More
Fixing of Chequered tiles of premium grade having thickness 7mm to 8mm confirming to IS 13755 of size 30cm x 30cm special plain / printed series in floors over 20mm thick bed of cement mortar 1:4 jointed with cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respects as per direction of Engineer-in-Charge.
443.66
219476
494.7
... More
Providing fitting fixing of inter locked paver block of size 80 mm thick and filling the joints with sand of approvedv quality including rubbing & polishing etc comleteincluding cost of all materials, labour with T&P etc. complete in all respect.
35
28394
811.26
... More
Providing and installation of Primo SD Vinyl Sheet Flooring manufactured by Tarkett with a nominal thickness of 2mm as per ISO 24340 - EN 429 and width of 2m as per ISO 24341 - EN 426. Primo SD shall conform to requirement of ISO 10581 - EN 649. Primo SD shall have binder content of Type I as per ISO 10581, Fire resistance of 8kW/m2 as per ISO 9239-1 and Class Bfl-S1 as per EN 13501-1, Indentation of less than .03mm as per ISO 24343-1 and EN 433, Slip Resistance of R9 as per DIN 51130, greater than 0.3 as per EN 13893. The static electrical discharge shall be less than 2kV as per EN 1815. The electrical resistance of the product shall be less than 10^8 Ω as per EN 1081. The product does not contain Pthalate based plasticizer and emission rate of VOC is very low, measured after 28 days as per EN 16516. TVOC and formaldehyde emissions are below 10µg/m3. It is 100% REACH compliant. The product is fit to be used in Class 34 in Commercial and Class 43 in Industrial as per EN ISO 10874. The product is installed using multi coloured welding rods to ensure seamless finish. The average seam strength shall be more than 240N/50mm as per EN 684.
-
-
-
... More
Ground Floor
196.98
886390
4500
... More
First Floor
343.87
1547418
4500
... More
Providing and fixing of 12mm thick clear Toughened Glass Frameless Door With Dorma Premium Fittings,Dorma Premium (9111198) Unilite Package BTS 75,UL PT 10 with Cover,UL PT 20 with Cover ,UL US 10 Luck with Cover and PT 24, Dorma Premium (9137121) H Type Handle 450mm,12mm Clear Toughened Glass with Cutout and Hole . including the cost of all materials ,hardware fittings,cost of all labour,conveyance, loading ,un loading ,T&P, etc , complete as per the direction of Engineer-in Charge.
9.45
107193
11343.2
... More
Providing and fixing of metal hose cabinet doors as per Is 3614 part-2 1992 for stability and integrity. Pressed galvanized steel confirming to IS 277 specification. Door tested & Approved from authorized Govt. testing agency for maximum rating of 2hrs. Door frame shall be double rebate profile of size 139 x 57 mm made out of 1.20mm minimum thick galvanized steel sheet. Provision should be kept for grouting with cement & sand slurry nesessary for fire doors on the clear masonary opening. Door leaf should be 44mm thick fully flush double skin door. Door leaf shall be manufacture from 0.6mm thick galvanized steel sheet. The internal construction of the door should be rigid reinforcement pads for receving appropriate hardware. The infill material shall be resin bonded honeycomb core. All doors shall be factory prepared and provided with necessary reinforcement for hinges, locks, Door closer, vision panel, flush bolt painting system will be powder coating finished.
-
-
-
... More
Ground Floor
148.16
1944173
13121.9
... More
First Floor
123.53
1620882
13121.9
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with: 6mm thick clear toghened Glass.
-
-
-
... More
Ground Floor
7.29
5292
726
... More
First Floor
5.81
4214
726
... More
Supply, installation, Testing and Commissioning of Hermetically Sealed Sliding Door: Size 2100mm x 1800mm with 300mm x 300mm view panel. It should be have both manual and automatic mode. The hermetically sealed, single sliding door with 300mm x 300mm view. The controller should be capable of being operated by elbow switch/foot switches as well as touch less sensor. The track should be of stainless steel / Aluminium and the running surface for the top rollers should be suitably angled to reduce resistance to movement. The door leaf should be hung by means of hard plastic rollers for high quality with double bearing at the top. Rollers should be provided under the stainless steel / Aluminium track to enable smooth and noiseless movement. The opening and closing of the door should be microprocessor controlled electromechanical movement. The door material should be of SMS/HPL. Color should be match the interior and care should be taken to make the leaf strong and light weight. One should be able to open and close the door effortlessly in case of failure of automatic mechanism. Door opening handle should be strong and sturdy. Material should be of SS (Matte finish). Should be provided with high quality ESPG lock. Door leaf should have high quality synthetic rubber gasket with long life to ensure hermetic sealing (to maintain air pressure differential). Air tightness 99.99% at a pressure minimum 75Pa. The finished floor on either side of the door should be perfectly level (maximum permissible difference +1mm). The door panel is 50-60mm thick and has 4mm thick high quality high pressure laminates on both side of 52mm thick pressure injected, CFC free Rigid polyurethane Core of 45±2 Kg/m density. (Sealed airtight to prevent further ingress of any microbial organism). The door and controls should comply with Electromagnetic compatibility Directive 2004/108/EC and Low voltage Directive 2006/95/EC. All motors used should be PMDC motors with essential isolation from mains. Door should be with vision windoe 300mm x 300mm with double glazed panel and sealed door frame (factory test certificate) should be enclosed the pre dispatch documents. Make - Metaflex
-
-
-
... More
First Floor
2
900000
450000
... More
Supplying and installing aluminium system - sliding windows made out of ALPURE/ Equivalent make frame dimension of 88mm x40mm & sash dimension of 31mm x61.5mm for with corners mechanical joints. Alupure aluminium systems are extruded through nalco billets with 6063 T6 grade with complete wind load calculation as per IS: 875 (part-3) Almost unlimited choice of colours due to finishing techniques such as anodising and power finishing. The system can accomodale glass with 4/5/6/8/10/12/14/20 & 22mm. The profile manufacture should have an authorised fabrication partner for windows assembling and installation. The windows must be installed complete with all kind of ironmongery ( including EPDM gaskets, bridging wedges and glass packers ) and with suitable water draining system. Application of silicon sealant from inside/outside of Dowcoming / GE or equivalent
-
-
-
... More
Ground floor
88.2
865303
9810.7
... More
First floor
76.5
750518
9810.7
... More
Supplying and installing aluminium system - fixed windows /ventilator made out of ALPURE /Equivalent make frame dimension of 39mm x 42mm for with comer's mechanical joints alupure aluminium systems are extruded through nalco billets with 5063 T6 grade with complete wind load calculation as per IS: 875 (part-3) Almost unlimited choice of colours due to finishing techniques such as anodising and power finishing. The system can accomodale glass with 4/5/6/8/10/12/14/20 & 22mm. The profile manufacture should have an authorised fabrication partner for windows assembling and installation. The windows must be installed complete with all kind of ironmongery ( including EPDM gaskets, bridging wedges and glass packers ) and with suitable water draining system. Application of silicon sealant from inside/outside of MCCOY/ Dowcoming or equivalent.
-
-
-
... More
First floor
5.4
52977
9810.7
... More
Second Floor
5.4
52977
9810.7
... More
Supplying and installing aluminium system - fixed windows /ventilator made out of ALPURE /Equivalent make frame dimension of 39mm x 42mm for with comer's mechanical joints alupure aluminium systems are extruded through nalco billets with 5063 T6 grade with complete wind load calculation as per IS: 875 (part-3) Almost unlimited choice of colours due to finishing techniques such as anodising and power finishing. The system can accomodale glass with 4/5/6/8/10/12/14/20 & 22mm. The profile manufacture should have an authorised fabrication partner for windows assembling and installation. The windows must be installed complete with all kind of ironmongery ( including EPDM gaskets, bridging wedges and glass packers ) and with suitable water draining system. Application of silicon sealant from inside/outside of MCCOY/ Dowcoming or equivalent.
-
-
-
... More
Ground floor
13.32
130678
9810.7
... More
First floor
12.24
120082
9810.7
... More
Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar/ flat including stair case hand railing with 40mm. dia G.I.pipe etc. including painting two coats over a coat of redoxide primer as per approved drawing and design with cost of all materials & labour, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge.
-
-
-
... More
Ground Floor
3200.31
223701
69.9
... More
First Floor
2541.78
177670
69.9
... More
Second Floor
145.8
10191
69.9
... More
Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in-charge.
-
-
-
... More
Ground Floor
5048.02
309191
61.25
... More
First Floor
6985.03
438511
62.78
... More
Second Floor
786.07
50586
64.35
... More
Painting two coats with approved antifungal weather seal paints (ISI) of approved colour, shade on wall surface over a coat of wall primer(ISI) water bound including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour,labour cess with T&P etc, complete as per specification & direction of Engineer-in-charge.
-
-
-
... More
Ground Floor
969.7
71884
74.13
... More
First Floor
1325.6
101915
76.88
... More
Second Floor
359.36
28667
79.77
... More
Finishing plastered surfaces of walls with water based wall putty of approved make and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.
-
-
-
... More
Ground Floor
4078.32
286461
70.24
... More
First Floor
5659.43
405432
71.64
... More
Second Floor
432.11
31578
73.08
... More
Painting two coats with plastic emulsion paint "Royale Shyne" to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge.
-
-
-
... More
Ground Floor
4078.32
325449
79.8
... More
First Floor
5659.43
461243
81.5
... More
Second Floor
432.11
35952
83.2
... More
Painting two coat with approved synthetic enamel paint to new wood & iron work over a coat of Red oxide primer including cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.
-
-
-
... More
Ground Floor
119.07
16710
140.34
... More
First Floor
94.14
13529
143.72
... More
Second Floor
5.4
794
147.2
... More
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance of all materials, cost of all labour,labour cess, T&P etc. required for the work complete in all respect as per direction of the Engineer-in-charge.
-
-
-
... More
Ground Floor
2650.56
888204
335.1
... More
First Floor
1874.33
628087
335.1
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well ramed, consolidated and grouted with fine sand and finishing the top smooth including shuttering at the edges, excavation and disposing of surplus earth with a lead of 100m.
203.15
57579
283.43
... More
Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Terraace Floor
1835.9
681779
371.36
... More
Supply of all materials & laying the waterproofing material of Dr.Fixit torch shield P3160(3mm)with its primer 2 coats or equivalent water proofing material after drying cleaning the concrete surface over the concrete floor/roof/ balcony/sunken and dado upto 1"6" in wall including cleaning,applying and mending as per specification including cost, conveyance, taxes, royalities of all materials to work site etc.all complete as per the direction of the Engineer-in-charge.
-
-
-
... More
First floor
129.89
60346
464.6
... More
Floor to floor - Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall xpansion control system for various vertical locations in load application areas that accommodates multi directional seismic movement without stress to it's components. ystem shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self - centering arrangement shall exhibit circular sphere ends that lock and slide nside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in- Charge. (Material shall conform to ASTM 6063).
-
-
-
... More
Ground floor
3.6
19440
5400
... More
First floor
3.6
19440
5400
... More
Wall to wall external and corner - Providing and fixing of made out of machine cut 2 mm thick 300 mm wide Aluminium sheet of approved pattern and design, and machine holed for receiving SS Screw, over expansion joint on vertical surfaces, and slotted (6 x 50 mm) at another side to provide scope for Expansion / Contraction, the fixing of plate in one row and joint only shall be done with SS Screw 8 mm dia 75 mm long @ 300 mm c/c including drilling on receiving surfaces and provide the one layer 1 mm Thick EPDM water barrier membrane fixing to RCC vertical surfaces with SR and longitudinal overlaps of membrane should be 50 mm fix, complete in all respect as per direction of Engineer-In-Charge.
-
-
-
... More
Ground floor
19.2
37440
1950
... More
First floor
19.2
37440
1950
... More
Wall to wall internal and corner - Providing and fixing of made out of machine cut 2 mm thick 300 mm wide Aluminium sheet of approved pattern and design, and machine holed for receiving SS Screw, over expansion joint on vertical surfaces, and slotted (6 x 50 mm) at another side to provide Scope for Expansion /constraction the fixing of plate in one row and joint only shall be done with SS screw 8 mm dia 50 mm long @ 300 mm c/c including drilling on receiving surfaces complete in all respect as per direction of Engineer-In-Charge.
-
-
-
... More
Ground floor
19.2
37440
1950
... More
First floor
19.2
37440
1950
... More
Civil work - Preparation of expansion joint front, cleaning, chipping making upstand bed of reach concrete and supply, installation, removal of scaffolding for expansion joint fixing complete in all respect as per direction of Engineer - in - charge
-
-
-
... More
Ground floor
19.2
28800
1500
... More
First floor
19.2
28800
1500
... More
Providing and fixing of expansion joint system of approved make and manufacture for various roof locations as per approved drawings and direction of Engineer-In-Charge. the joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates as per ASTM B221- 02. The system shall be such that it provides water tight roof to roof /roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof reatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing anufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint ystem shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. rovision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063.)
-
-
-
... More
Terrace floor
15
85500
5700
... More
Manufacturing, Providing and Fixing of (Glass Fibre Reinforced Concrete) GFRC Jali/ Screen, make ''Samudyam or equivalent'' of thickness 25mm+/- 5mm with border thckness 50 +/- 10mm pattern, design and color of approved make to be fixed on/between RCC/Block work column or structural work with dry fixing method with appropriate frame work, using fastners and necessary hardware in building facade. The element shall be made from 53 grade portland cement make Birla/ JK cement or equivalent, quartz, fine silica sand, alkali resistant glass fibre make 'OC' or equivalent, super plasticizer/ adhesives (make _BASF or equivalent) polymers and UV resistant synthetic inorganic pigments shall be used for pigmentation make ' BAY FERROX' or equivalent. The material casting shall take place in synthetic rubber/ FRP mould manufactured by mould toolof revex/ reckli or equivalent.
-
-
-
... More
Ground floor
24
142288
5928.7
... More
First floor
72.45
429534
5928.7
... More
E.I WORK
GROUND FLOOR
Recessed wiring to light point / fan/Call Bell and Exhaust fan point with 1.5 sq.mm FR PVC insulated Single copper multistand copper conductor of ISI marked with 50mm dia non-metalic 20mm dia non metalic PVC flexible conduit with 5/6 250 volt piano type switch, ceiling rose mounted on MS box having front bakelite cover of suitable size M.S. box with 1.5sqmm FR PVC ubsyked S?C multistand copper conductor as earth wire including all accessories and connection as per direction of Engineer-in-charge (Make of wire Finolex/ Anchor / Havells /HPL /L&T /V.Guard)
-
-
-
... More
a) Group A
100
41800
418
... More
b) Group B
190
122550
645
... More
c) Group C
108
100224
928
... More
Recessed wiring to 5/6amp socket switch with 2 x 1.5sqmm FR PVC insulated S/C MS copper wire of ISI marked in 20mm dia PVC flexible conduit and earthing point 1 x 1.5sqmm S/C MS copper wire as required
22
9350
425
... More
b) On Existing Board
89
7654
86
... More
S/F of metal box of 180mm x 100mm x 60mm deep nominal size on surface / recessed with cover including 15/16sqmm socket with switch complete.
73
20148
276
... More
Surface wiring to sub-main wire along with wire earth wire PVC insulated S/C MS copper wire in 20mm dia PVC flexible conduit.
-
-
-
... More
a) 2 x 1.5sqmm+1x1.5sqmm
750
95250
127
... More
b) 2 x 2.5sqmm+1x1.5sqmm
940
132540
141
... More
c) 2 x 4.0sqmm+1x1.5sqmm
660
104280
158
... More
d) 2 x 10.0sqmm+1x4sqmm
1170
292500
250
... More
S/F of (4+12) 4way double door TPN DB with 63A 4P MCB-1no and10/32 A SP MCB 12 Nos. (Legrand/
5
71010
14202
... More
S/F of 6way double door TPN DB with 63A 4P MCB-1no and10/32 A SP MCB 20 Nos.
3
48171
16057
... More
S/F of 90w LED Street Light fitting.
10
98000
9800
... More
S/f of portico light with lamp fitting complete (CG/ Havells/ Philips)
2
3030
1515
... More
S/F of Batten/B.K. Angle Holder ISI marked including connection. instead of Ceiling Rose
121
6534
54
... More
S/f of 9 Watt LED bulb (Phillips/ Bajaj/ Crompton)
121
21780
180
... More
S/F of 1 x 20w Led Tube light
142
92300
650
... More
s/f of Special copper plate earthing with coppper plate 600mm x 600mmx 2.15mm thick with G.I pipe 3 meter long 40mm dia with charcole and sand with machinary encloser with cover having locking arrangements and watering pipe etc.
4
57600
14400
... More
S/F 9" of Exhaust Fan.
28
51800
1850
... More
S/f of computer board
25
21250
850
... More
S/f of 18Watt celling light squre type ( Havells/ Bajaj/ Crompton)
6
10680
1780
... More
Supplying of 150sqmm 3 1/2 core Allmn. Armd. Cable (Make nicco / Havells / Polycab)
100
92200
922
... More
Supplying of 70sqmm 3 1/2 core Allmn. Armd. Cable (Make nicco / Havells / Polycab)
50
24450
489
... More
S/F Laying of cable on surface
140
7840
56
... More
S/F of 48" Sweep Ceilling fan (Make Usha Allune/Bajaj eliglenue / /CG high bnize)
89
215647
2423
... More
S/F of Electronic Fan Regulator.
89
22250
250
... More
S/f of industrial socket with 25Amp MCB
22
27720
1260
... More
Wiring to inverter wiring with 1x1.5 mmsq PVC S/C multi strand copper wire
360
16200
45
... More
1- S/f of 630A MCCB cubical panel board made of 18SWG CR sheet with power coated with provision of following items with febrication of panel board size.
1
160000
160000
... More
2- 630A 4 pole MCCB. of Legrand/ Hager/ Acheider/ Siemens.
-
-
-
... More
3- 800A TPN Copper Bus bar with flat .
-
-
-
... More
4- 250A 4 pole MCCB -2 Nos of Legrand/ Hager/ Acheider/ Siemens make.
-
-
-
... More
5- 125A 4 pole MCCB -2 Nos of Legrand/ Hager/ Acheider/ Siemens make.
-
-
-
... More
6- 63A 4P MCCB - 4 Nos.of Legrand/ Hager/ Acheider/ Siemens make.
-
-
-
... More
7- Digital metering arrangement.
-
-
-
... More
8- Indicating lamp - 1 Set.
-
-
-
... More
1- S/f of 250A MCCB panel board made of 16SWG CR sheet with power coated with provision of following items with febrication of sub panel board size.
1
88500
88500
... More
2- 250A 4 pole MCCB. of Legrand/ Hager/ Acheider/ Siemens.
-
-
-
... More
3- 300A TPN Copper Bus bar with flat .
-
-
-
... More
4- 63A 4 pole MCCB -6 Nos of Legrand/ Hager/ Acheider/ Siemens make.
-
-
-
... More
5- 32A 4 pole MCCB -4 Nos of Legrand/ Hager/ Acheider/ Siemens make.
-
-
-
... More
6- Digital metering arrangement.
-
-
-
... More
7- Indicating lamp - 1 Set.
-
-
-
... More
FIRST FLOOR
Recessed wiring to light point / fan/Call Bell and Exhaust fan point with 1.5 sq.mm FR PVC insulated Single copper multistand copper conductor of ISI marked 20mm dia non metalic PVC flexible conduit with 5/6 250 volt piano type switch, ceiling rose mounted on MS box having front bakelite cover of suitable size M.S. box with 1.5sqmm FR PVC ubsyked S?C multistand copper conductor as earth wire including all accessories and connection as per direction of Engineer-in-charge (Make of wire Finolex/ Anchor / Havells /HPL /L&T /V.Guard)
-
-
-
... More
a) Group A
90
37620
418
... More
b) Group B
185
119325
645
... More
c) Group C
100
92800
928
... More
Recessed wiring to 5/6amp socket switch with 2 x 1.5sqmm FR PVC insulated S/C MS copper wire of ISI marked in 20mm dia PVC flexible conduit and earthing point 1 x 1.5sqmm S/C MS copper wire as required
110
46750
425
... More
b) On Existing Board
194
16684
86
... More
S/F of metal box of 180mm x 100mm x 60mm deep nominal size on surface / recessed with cover including 15/16sqmm socket with switch complete.
25
6900
276
... More
Surface wiring to sub-main wire along with wire earth wire PVC insulated S/C MS copper wire in 20mm dia PVC flexible conduit.
-
-
-
... More
a) 2 x 1.5sqmm+1x1.5sqmm
460
58420
127
... More
b) 2 x 2.5sqmm+1x1.5sqmm
675
95175
141
... More
c) 2 x 4.0sqmm+1x1.5sqmm
650
102700
158
... More
d) 2 x 10.0sqmm+1x4sqmm
1125
281250
250
... More
S/F of (4+12) 4way double door TPN DB with 63A 4P MCB-1no and10/32 A SP MCB 12 Nos.
7
99414
14202
... More
S/F of Batten/B.K. Angle Holder ISI marked including connection. instead of Ceiling Rose
104
5616
54
... More
S/f of 9 Watt LED bulb (Phillips/ Bajaj/ Crompton)
104
18720
180
... More
S/F of 1 x 20w Led Tube light (Phillips/ Bajaj/ Crompton)
130
84500
650
... More
S/F 9" of Exhaust Fan.
23
42550
1850
... More
S/f of computer board
15
12750
850
... More
S/f of 18Watt celling light squre type ( Havells/ Bajaj/ Crompton)
10
17800
1780
... More
S/F of 48" Sweep Ceilling fan (Make Usha Allune/Bajaj eliglenue / /CG high bnize)
108
261684
2423
... More
S/F of Electronic Fan Regulator.
108
27000
250
... More
Wiring to inverter wiring with 1x1.5 mmsq PVC S/C multi strand copper wire
270
12150
45
... More
S/f of industrial socket with 25Amp MCB
15
18900
1260
... More
1- S/f of 250A MCCB panel board made of 16SWG CR sheet with power coated with provision of following items with febrication of sub panel board size.
1
88500
88500
... More
2- 250A 4 pole MCCB. of Legrand/ Hager/ Acheider/ Siemens.
-
-
-
... More
3- 300A TPN Copper Bus bar with flat .
-
-
-
... More
4- 63A 4 pole MCCB -6 Nos of Legrand/ Hager/ Acheider/ Siemens make.
-
-
-
... More
5- 32A 4 pole MCCB -4 Nos of Legrand/ Hager/ Acheider/ Siemens make.
-
-
-
... More
6- Digital metering arrangement.
-
-
-
... More
7- Indicating lamp - 1 Set.
-
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
20
2300
115
... More
FIRE FIGHTING
ANALOGUE ADDRESSABLE FIRE DETECTION AND ALARM SYSTEM
Analog Addressable Fire Alarm Control panel with battery back up for normal operation and 15 minutes alarm operation. The control panel, battery charger etc, shall be UL / EN listed.The panel shall be 2 loops capacity and expandable to 6 loops. The panel shall consisting with 80 character LCD display and RS 485 for networking. Eachloop shall support 99 analog/addressable device and 99 modulesminimum as system capacity .The panel rate should inclusive modulesinterface for fire alarmpanel withcomplete accessorires(make- Morley by Honey well/Edward/Bosch/Simens.)
1
150000
150000
... More
Analogue Addressable Multi Sensor Smoke detector with programmable for timed automatic sensitivity selection with base, Junction box and other accessories as required and Cetectors shall be UL/EN listed.(make- Morley by Honey well/Edward/Bosch/Simens.)
110
384890
3499
... More
Addressable Horn / Strobe wall mounted type rated at 82 dBA @ 3m for Audible annunciation and 75cd flashintg at 1 Hz for visual indication.
14
104300
7450
... More
Supplying, installing, testing and commissioning of 2 runs of 1.5 sq. mm, PVC insulated copper armoured cable confirming to IS standards and specifications.Make-RR cable/Havels/Kei/Polycab.
1200
189600
158
... More
Addressable Single action Manual pull station having an integrally mounted addressabla module that monitors and reports contact status.(make- Morley by Honey well/Edward/Bosch/Simens.)
14
54040
3860
... More
Supplying, installing, testing and commissioning approved make pvc conduits on ceiling / wall / floor etc. complete with accessories like, Junction boxes, Collars, Bends etc.Make-KEI/Polycab/Precision.
700
59500
85
... More
Analogue Addressable Control module shall be capable of providing DPDTcontact rated at 24v DC, 2A.
5
15500
3100
... More
Fire HYDRANT SYSTEM
-
-
-
... More
Supply, erection, testing & commissioning of electrical motor driven Booster pump of Monoblock type capable to deliver 450LPM at 35MWC.The pump shall be coupled to TEFC motor of suitable HP with speed of 2900RPM and complete set shall mounted on common base frame.Mke-Kirloskar,Wilo,Ksb.
1
62500
62500
... More
Fabricating & Supply, installing, testing and commissioning of dust and vermin proof motor control panel fabricated from 14 SWG MS sheet with stove enamelled paint and comprising of: (for Fire Booster pump automatic operation ).
1
34500
34500
... More
1100 V GRADE POWER / CONTROL CABLES
-
-
-
... More
Supplying, laying, testing & commissioning of FRLS,PVC outer sheateh, steel armoured, aluminium / copper conductor, 1100v grade power cables with glands etc.The cables shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc. as required. For cables laid out door the rate shall include earth excavation providing brick and sand protection, refilling and compacting the earth.The rate shall excludes tray & Hume pipes.The minimum size of the cables shall as mentioned below.Make-Polycab/Kei/RR cable/Havels.
-
-
-
... More
4 C x 16 Sqmm.
55
21395
389
... More
2 C x 1.5 Sqmm.for Instrumentation
50
7850
157
... More
CABLE TRAY
-
-
-
... More
Supplying and fixing of perforated G.I.sheet cable tray with neccessory angle iron suspension supports, anchor fasteners etc. complete. Maximum height of suspension shall not exceed 500 mm.Size of the tray shall be suitable for laying the above mentioned cables.
40
11400
285
... More
G.I. Earthing strips of 25mm x 3mm thick, strip shall be run on floor / ceiling / walls, from the equipment to the nearest Earth pit with neccessory accessories as required. ( Erath pit shall be executed by other agencies).
65
12155
187
... More
Supplying, installing, testing and commissioning of MS Pipes confirming to IS 1239 Pt - I Heavy grade with painting, suitable type of supports, anchor fasteners, bolts nuts ( Galvanised), clamps, "U" bolte, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, as per drawings. The quoted rate shall also include for chasing / chipping walls, making bore holes in walls / floor and making them good with filler material and finished in cement morter etc. complete.Make-Tata/Jindal.
-
-
-
... More
100 mm nominal dia
128
245760
1920
... More
80mm nominal dia
6
6960
1160
... More
Supplying, installing, testing and commissioning of Wafer type C.I. Non-return valves ( PN 16) swing check type with required flanges, nuts, bolts and gaskets etc. complete.Make-Kartar/Audco/Leader/Zoloto.
-
-
-
... More
100 mm nominal dia
1
5860
5860
... More
Supplying, Installing, testing and commissioning CI butterfly valves as per BS 5155 ( PN 16) slim seal standared lever operated type with required flanges, nuts, bolts etc. complete.The valve shall be fitted with Supervisory switch for monitoring.Make-Kartar/Audco/Leader/Zoloto.
-
-
-
... More
100mm nominal dia
2
10960
5480
... More
80mm nominal dia
4
18680
4670
... More
Supplying, installing and commissioning C.I.flanged "Y" type Strainer with SS mesh,suitable flanges, nuts, bolts, gaskets etc. complete.Make-Kartar/Audco/Leader/Zoloto.
-
-
-
... More
100 mm nominal dia
1
9900
9900
... More
Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves with fittings of screwed end type.Make-Kartar/Audco/Leader/Zoloto.
-
-
-
... More
15mm dia.
2
1560
780
... More
25 mm dia
6
10140
1690
... More
Supply and installation of Pressure switches of suitable range for pumpsets with Ball valves, Fittings like unions / colors / reducers etc.Make-Indfos/Grandfos.
1
3170
3170
... More
Supply and installation of Pressure gauges of suitable range for pumpsets with Ball valves, siphon, Fittings like unions / colors / reducers etc.Make-H guru/G guru.
1
1580
1580
... More
Rubber below for reducing vibration in the system.
-
-
-
... More
100 mm
1
10800
10800
... More
Installing,testing& commissioning of Landing Hydrants comprising of the following in the Fire duct;
-
-
-
... More
Single headed hydrant valve as per IS 5290, made of ss with 63 mm dia instantaneous out & 80 mm dia fanged inelt inlet,Blank cap , chain and hand wheel etc complete make- Firesheild/Kartat/Newage/Omex.
4
23840
5960
... More
Single lengths of 15 M long, 63mm dia RRL hose with instataneuos couplings and Hoses shall be stored in side the hose cabinet make- Firesheild/Kartat/Newage/Omex..
8
40800
5100
... More
ss type short branch pipe with nozzle make- Firesheild/Kartat/Newage/Omex..
4
9440
2360
... More
Hose reel drum of swinging type with 19mm dia Rubber braided hose of 30 M. length Shut off nozzle of ISI standard complete make Fire sheild/Kartar/Newage/Omex.
5
39300
7860
... More
M.S. Hose cabinet stand mouted type fabricated out of M.S. sheet of 16 swg. with glass fronted ( 4mm thick glass with rubber beeding) door and size of the cabinet shall be 600mm x 750 mm x 250 mm Quoted rate shall be includes suitable stand for mounting, all fasteners etc, and cabinet shall be powder coated of approved colour both inside and out side.
5
22500
4500
... More
Supplying, installing and commissioning of fire brigade inlet inlet connection of 2 way with 2 nos. 63 mm dia. built - in Gun metal Non- return valves instantaneous coupling type arranged on 100 mm dia. Pipe manifold and connected to wet riser main as well as to Fire water tank. Qouted rate shall be included with C.I. Butterfly valve, C.I. Non-return valve with mounting supports etc. complete.Make Firesheild/Omex/Newage/Kartar.
1
17500
17500
... More
Fire Extinguisher & Signange
-
-
-
... More
Supplying, installing and commissioning Portable Fire extinguishers of following type & capacity.
-
-
-
... More
Materials with the IS specifications not valid now, we have consider IS products rates, i.e. IS 15683.
-
-
-
... More
Carbon-di- oxide type fire extinguisher of 4.5 kgs. Capacity, CO2 gas filled in brand new seamless cylinder with powder coated finish, made out of Manganese steel, with wheel type valve, discharge nozzle, bend & horn, wal mounting bracket etc. complete, confirming to IS: 15683.Make-Safex,Kanex,Firesheild,Cease fire.
12
92400
7700
... More
Mechanical Foam type fire extinguisher 9Lts. Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, high pressure CO2 gas cartridge, hose and ABS type branch pipe and wall mounting bracket etc. complete, confirming to IS: 10204.Make-Safex,Kanex,Firesheild,Cease fire.
1
3659
3659
... More
ABC dry powder stored pressure( pressurised with Nitrogen gas type fire extinguisher of 6 Kgs. Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with pressure meter, , discharge hose, wall mounting bracket etc. complete, confirming to IS:15683.Make-Safex,Kanex,Firesheild,Cease fire.
12
39168
3264
... More
Fire buckets round bottom type enamel painted, white inside & Red out side and Letter "FIRE" in black out side and handle with mounting bracket.
4
1920
480
... More
Fire bucket stand fabricated by MS angles to install 4 Nos. of buckets.
1
2400
2400
... More
Providing and Fixing of Double leaf Ivory colour 46-48mm thick steel check door of 120 minutes Fire rating confirming to BS; 476 Part-22 and IS:3614 Part-II ( as per the CBRI RoorkeeTest Report )fabricated with 2 nos. 18 SWG ( 1.2 mm) galvanized steel sheet shutter sandwitching with 2 sheets. The door frames are manufactured from 16SWG ( 1.6 mm) galvanized steel sheet pressed form to double rebate profile of size 128/69 mm. Coated with one coat of fire and corrosion resistant primer and with PU finished.etc. Complete as per Direction of E.I.C. Hardware Fittings: SS ball bearing hinges with dimension of 4" x 3" x 3mm (8 Nos), Mortise Dead lock (1 No), D Handle (2 No), Door closer TS-1000c with std arm (2 No), Fire rated single glased vision panel with 5mm clear glass (200 x 300mm) (2 No) (Make:Steeltech)
9
495000
55000
... More
SIGNAGES
Supplying and installing of in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC reflective self adhesive vinyle painted foam board, complete with mirror fasteners.
-
-
-
... More
Floor indentification signage ( ie, GROUND FLOOR …etc.) at each stair enclosure on every floor, indicating the floor number in words, lettering size shall be 7.5 cm with contrasting colour from back ground.Size shall be 18cm x 30cm.
6
7500
1250
... More
Analogue addressable main fire alarm panel
1
760
760
... More
Mcps
12
9120
760
... More
Exit sinages
8
6080
760
... More
Exit with left arrow
12
9120
760
... More
Fire extinguisher
24
18240
760
... More
No smoking
2
1520
760
... More
Exit with right arrow
12
9120
760
... More
Evacuation plan. Outer cover 3 mm thick photoluminescent plastic,paint highest quality UV resistant glass paint frame Aluminium made Material Non-radioactive, nonphosphorous, non-toxic and lead free, Glowing Time=3000 minutes luminance 215mcd/sqm warranty 5 years as per the direction of engineer incharge(A3 Size) on steel frame with cc work.
4
18000
4500
... More
Supplying and installing of in position signages "FIRE ORDER" it should be contain following matter on 3 mm thick "Opaque" PVC foam board of computerised cut,PVC non-reflective self adhesive vinyle painted foam board of 3'× 4' as per BIS specification.A) Alert the security at security room by actuating manual call point located at strategic locations. B)evacuate the occupants by using fire exits and emergency exits only and assemble at various assembly points. C) If possible try to extinguish the fire by using nearest /suitable portable extinguisher or water from nearest wet riser. D)Be calm and don't give any room for panic.walk, don't run.E) If you encounter serious difficulty in evacuation, flat and try to attract attention of rescue team.
4
16000
4000
... More
Action by security/receotion upon receipt of information through fire alarm or fire detectors or by using public address system. A) Alert the occupants by using public address system. B) Inform fire control through any one of the following phone number:101/ (local number). C)Refer evacuation plan from evacuating standard people. D) Guide the fire force on their to the seat of fier. E)In case of the casualties call ambulance by dialing number....... phone :................ Fax................, as per BIS specification.
4
16084
4021
... More
EMERGENCY EVACUATION SYSTEM/PUBLIC ADDRESS SYSTEM
-
-
-
... More
Supplying, installing, testing and commissioning of 6 Watt wall mounted speaker completed as required.Make-Honeywell/Bose/Bosch.
16
67200
4200
... More
Supplying, installing, testing and commissioning of Power mixture amplifier of 480 watt.The amplifier should be clean reliable audio for public address amplification.Line input less than 1 volt, unbalanced& line output less than 1 volt unbalanced.Make-Honeywell/Bose/Bosch.
1
61380
61380
... More
Supplying, installing, testing and commissioning of 2 Core x 1 Sq.mm Twisted Pair PVC insulated FRLS unarmored Cable with Accessories confirming to IS standards and specifications. Make-Polycab/Havels/RR cable/KEI.
550
41250
75
... More
Supplying, installing, testing and commissioning approved make 20 mm dia.PVS FRLS flexible conduits on ceiling / wall / floor etc. complete with accessories like, Junction boxes, Collars, Bends etc.Polycab/AKG/BEC/Precision.
350
19250
55
... More
Supply, testing & commissioning of microphone with cable for announcing.
1
4750
4750
... More
CCTV
CP Plus DVR 32 channel LED CV/HD TV Technology with720p/ pentaplex/ HDMI/ 3G/DDNS/ Remote view through Handset, Mobile, Laptop, high end procedure with dongle support & mobile view.
1
32000
32000
... More
CP Plus IR Bullet HD Camera with day & night standard smart IR LED HDCV/HDTV Technology with weatherproof , Range -20 to 30 Mtr.
12
41076
3423
... More
CP Plus IR Dome camera with day & night HDCV/HDTV technology with weatherproof.
12
35760
2980
... More
Power supply CP Plus 20A.
2
6000
3000
... More
6 TB Hard Drive Disk , HDD 1 TB SV 35
1
18000
18000
... More
Cabling/laying of CC TV Cable & Accessories.
200
5000
25
... More
P Clip, BNC Pin ,Tie for DVR.
24
35520
1480
... More
HDMI Cable(1-5 mtr)
2
1500
750
... More
Moniter 19” LG / Samsung
1
20000
20000
... More
SMPS 10amp
1
2890
2890
... More
P.H WORK
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.
-
-
-
... More
25mm dia PVC ASTM pipe (sch-80) Ground floor
120
22572
188.1
... More
First Floor
80
15544
194.3
... More
Second Floor
80
16048
200.6
... More
32mm dia PVC ASTM pipe (sch-80) roof of Firstfloor
90
23679
263.1
... More
40mm dia PVC ASTM pipe (sch-80)roof of First floor
100
34510
345.1
... More
50mm dia PVC ASTM pipe (sch-80)roof of First floor
150
64260
428.4
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge
-
-
-
... More
20mm dia C-PVC pipe
-
-
-
... More
Ground floor
40
9784
244.6
... More
First Floor
40
10116
252.9
... More
25mm dia C-PVC Pipe
-
-
-
... More
Ground floor
130
43277
332.9
... More
First Floor
100
34120
341.2
... More
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
... More
15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)
117
100772
861.3
... More
15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make)
71
103084
1451.9
... More
15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make)
52
65260
1255
... More
25mm dia brass full way valve (Shakti make)
30
27846
928.2
... More
32mm dia brass full way valve (Shakti make)
10
13589
1358.9
... More
40mm dia brass full way valve (Shakti make)
8
13802
1725.3
... More
50mm dia brass full way Valve (Shakti make)
10
25545
2554.5
... More
15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make)
52
85732
1648.7
... More
15mm CP Extension piece
250
14825
59.3
... More
125mm CP grating
142
11942
84.1
... More
15mm size C.P. flange
250
10075
40.3
... More
20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make)
10
11812
1181.2
... More
15 mm dia CP Bib cock Elbow Action (FLR-CHR-5031N Jaquar)
10
21409
2140.9
... More
Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge
-
-
-
... More
2000 liters capacity PVC water storage tank top of 1st floor
12
436846
36403.9
... More
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.
-
-
-
... More
Ground floor
40
1880
47
... More
First Floor
40
1912
47.8
... More
Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge
-
-
-
... More
Ground floor
40
6488
162.2
... More
First Floor
40
6520
163
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
-
-
-
... More
Ground floor
80
14104
176.3
... More
First Floor
80
14520
181.5
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
... More
110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
240
110112
458.8
... More
110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)
40
19892
497.3
... More
110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
50
14680
293.6
... More
110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
40
9280
232
... More
110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
30
12222
407.4
... More
110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
70
4074
58.2
... More
110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make)
30
13713
457.1
... More
110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make)
30
16536
551.2
... More
110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
90
14409
160.1
... More
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
... More
580mm size Orissa pan (Hindware/Parryware/Neycer make)
5
12713
2542.7
... More
Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
-
-
-
... More
10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
52
81660
1570.4
... More
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
-
-
-
... More
European water closet with 's' trap plain(Hindware/Parryware/Neycer make)
47
124188
2642.3
... More
Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge ( stall urinal)
19
86056
4529.3
... More
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
-
-
-
... More
Counter top basin 560x455 (Parryware make) white
20
84162
4208.1
... More
550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock with PEDESTRAL
25
98222
3928.9
... More
Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink
22
108116
4914.4
... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
25mmx600mm long CP towel rail (Jaquar make)
26
44787
1722.6
... More
Towel ring (Jaquar make)
67
66611
994.2
... More
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.
-
-
-
... More
600mmx125mm plate glass shelf (Jaquar make)
25
35067
1402.7
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
-
-
-
... More
Design Large Mirror0.9*0.9*26
54.27
95200
1754.2
... More
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
CP soap holder (Jaquar)ACN-ACR-1131N
120
126972
1058.1
... More
Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.
-
-
-
... More
15mm CP revolving shower (Jaquar)CON-CHR-209KN
26
40947
1574.9
... More
Differently Abled series (2no)
-
-
-
... More
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
-
-
-
... More
550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal
1
3928
3928.9
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
-
-
-
... More
600mmx450mm size B.E mirror (swivelled type)
1
642
642.7
... More
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge.SINGLE PIECE-WATER COLSET P TRAP - LYS-WHT-0204P
1
12008
12008.7
... More
CP soap holder (Jaquar)ACN-ACR-1131N
1
1058
1058.1
... More
CP towel ring (Jaquar) CAN - ANQ - 1121
1
994
994.2
... More
Grab bar (Jaquar make) WAC - WHT - BAI 090
2
12599
6299.7
... More
450MM long Grab bar (Jquar make)AHS - CHR - 1507
2
2706
1353.4
... More
Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
90
16353
181.7
... More
Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
100
11350
113.5
... More
Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site.
11.84
4268
360.5
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
11.84
54656
4616.3
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
-
-
-
... More
Ground floor
11.88
74684
6286.6
... More
First Floor
8.9
58772
6603.7
... More
Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size Kajaria/Somany/Johnson tile 60cmx60cm special printed series to be pre-approved by the Engineer-in-charge )
-
-
-
... More
Kajaria/Somany/Johnson tile 60cmx60cm
-
-
-
... More
Ground floor
118.48
139616
1178.4
... More
First Floor
89.19
106020
1188.7
... More
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
-
-
-
... More
Ground floor
619.4
94272
152.2
... More
First Floor
437.01
68042
155.7
... More
Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size Kajaria/Somany/Johnson tile 60cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge )
-
-
-
... More
Kajaria/Somany/Johnson tile 60cmx30cm
-
-
-
... More
Ground floor
619.4
690197
1114.3
... More
First Floor
437.01
493733
1129.8
... More
Granite Tiles 10mm thick
-
-
-
... More
Ground floor
8.91
16034
1799.6
... More
First Floor
7.29
13232
1815.1
... More
Supplying all materials, labour, T&P & constructing rcc drain of size 0.30mtr x 0.45mtr drains as per P.H. design & specification including lead of all materials to site.
38
129162
3399
... More
Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.
126.84
435137
3430.6
... More
Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge
391.9
436694
1114.3
... More
Supplying all materials, labour, T&P and providing brick work in super structure with fly ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
Ground floor
2
8921
4460.7
... More
First Floor
1
4494
4494
... More
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 120 PSS UV of size 750x570x1350mm height with water storage capacity 120 liters along with 3 nos of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge.
-
-
-
... More
Aquagurd Pure Chill 120 PSS UV
5
656330
131266
... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge
-
-
-
... More
100mm dia P.V.C. pipe
80
86992
1087.4
... More
150mm dia P.V.C. pipe
110
193281
1757.1
... More
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge
-
-
-
... More
Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
8
69352
8669.1
... More
Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification.
-
-
-
... More
MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover )
16
270128
16883
... More
Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
3
59515
19838.4
... More
Supplying all materials labour T&P and laying soak way gallery with SW pipe with jointing laid packed all around with supply of stone boulders size 50mm to 150mm in (1:6) other than granite cover at top with layer of flat taller size 0.3048 x 0.3048x 0.2510m including earth work in excavation of trenches in all kinds of soil to an average depth of 1.52 m cover of earth at the gallery top all complete as per approved design and including carriage of all materials to site.
-
-
-
... More
100 mm dia SW pipe
20
34528
1726.4
... More
3 no 50 users RCC septic tank
-
-
-
... More
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.
83.85
18102
215.89
... More
Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.
16.77
3886
231.75
... More
Supplying all materials, labour, T&P and providing shoring and shuttering foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per direction of the Engineer in charge.
98.4
24167
245.6
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
9.24
3331
360.5
... More
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
9.24
45768
4953.3
... More
Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
95.04
15111
159
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
95.04
3069
32.3
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
31.02
13955
449.9
... More
R.C.C beams,columns,girder and bressmer etc.
220.5
169542
768.9
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
28.17
248217
8811.4
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
35.28
243908
6913.5
... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
2.4
15087
6286.6
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
15.84
2410
152.2
... More
Supplying all materials, labour, T&P and providing brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
1.8
8029
4460.7
... More
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
18
4681
260.1
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
17.07
2047
119.94
... More
1 no 30,000ltr R.C.C. Sump (6.00x2.50x3.00)
-
-
-
... More
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.
54
11658
215.89
... More
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft.
36
8343
231.75
... More
Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.
20.78
2492
119.94
... More
Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge
3.15
1135
360.5
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 40mm size crusher broken hard black granite metal including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
3.15
15602
4953.3
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.
13.47
93124
6913.5
... More
Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
14
123359
8811.4
... More
Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge
-
-
-
... More
RCC floor, roof slab chhaja up to 4.430 m height
49.2
22135
449.9
... More
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
111.36
18084
162.4
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge
56
1808
32.3
... More
Supplying and fitting and fixing stainless steel 34 grade in said rail using 5mm dia 2mm thick circular pipe and balustrade 32mmx32mmx2mm at the rate of mtr.Center to center and square pipe 32x32x2mm below including welding with stanless steel elect rod and fixing with necessary accessories etc.complete as per direction of the Engineer-in-charge.
60
19422
323.7
... More
Providing fitting and fixing RCPC cover etc complete as per direction of Engineer-in-charge
2
2186
1093.1
... More
Construction of 1 no production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories
-
-
-
... More
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
-
-
-
... More
Drilling of 200mm dia bore
-
-
-
... More
00 mtr to 30mtr
60
45328
755.48
... More
30 mtr to 45mtr
30
25088
836.28
... More
Drilling of 150mm dia bore
-
-
-
... More
46 mtr to above
340
188526
554.49
... More
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
-
-
-
... More
Lowering of 200mm dia P.V.C casing pipes
-
-
-
... More
00 mtr to 30 mtrs
60
8292
138.2
... More
30 mtr to 45mtr
30
4146
138.2
... More
Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.
-
-
-
... More
200mm dia PVC (sch-80) pipe
90
147042
1633.8
... More
Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)
2
1579
789.8
... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
-
-
-
... More
By DTH Rig
2
9989
4994.8
... More
Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation:
-
-
-
... More
Rocky terrain with boulder formation for 300m depth
4
4488
1122.11
... More
Supplying all materials , labour T&P and providing consturction of plat form as per UNICEF specifcation etc.all completes as per direction of Engineer-in-Charge
1
6739
6739
... More
Supplying all materials ,labour T&P and providing fitting and fixing India Mark-II hand pump with C I Cylender and connectiong roads with providing 24.00 mtr of 32 mm dia GI raiser pipe etc. all complete as per P.H Specification and direction of Engineer-in-Charge
1
13282
13282
... More
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make)
-
-
-
... More
2 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm
4
89400
22350
... More
DOL Control panel
4
15222
3805.5
... More
40mm dia steel short piece
2
304
152.3
... More
Well cap
2
304
152.3
... More
50mm size CI bracket
2
182
91.3
... More
2.50sqmm flat cable
135
17293
128.1
... More
20mm dia rigid UPVC pipes
160
1104
6.9
... More
Steel rope with cover
110
2937
26.7
... More
Labour charges for lowering including transportation
4
8000
2000
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge
-
-
-
... More
32mm HDPE pipes (Finolex/Supreme make)
184.69
18431
99.8
... More
Rain Water Harvesting
-
-
-
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
... More
110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
120
55056
458.8
... More
110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
20
5872
293.6
... More
110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
40
6404
160.1
... More
125mm CP grating
20
1682
84.1
... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge
-
-
-
... More
150mm dia P.V.C. pipe
80
140568
1757.1
... More
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge
-
-
-
... More
Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
8
69352
8669.1
... More
Supplying all materials labour T&P and constructing 1.80m diax2.60m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
3
127212
42404
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements