Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
Refer DocumentsDocument Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_EICCL_84149_4Bid Award Id
ViewTender No
CCEEC-19/2022-23Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Supplying, diluting and preparing chemical emulsion like CHLORPYRIPHOS or other chemicals approved by Central Insecticides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as pre-constructional anti termite treatment and creating a chemical barrier under and around wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, surrounding the pipes and conduits etc. complete at the rate of 7.5 liters (or as directed by the manufacturer) per sqm on vertical and 5.0 liters per sqm on horizontal surfaces, 50% of the emulsion to be filled in the holes made in trenches at 150mm center to center etc.complete as per IS:6313/1981(Part-II) and as per the direction of the Engineer -in-charge including all cost of materials, labour and T&P etc all complete.
760.44
-
110.4
Filling in foundation, trenches and plinth with river sand in layers not exceeding 20 cm in depth, well watered and compacted in layers with top surface dressed and leveled to proper gradient including cost of all materials, conveyance and royalties, loading and unloading, including cost of all labour, sundries ,T & P etc. complete as per directions of the Engineer -in-charge.
676.45
-
679.5
Providing and laying of Cement Concrete of grade 1: 4 :8 (1cement : 4 sand : 8 graded stone aggregate of size 25mm to 40 mm hard granite crusher broken metal ) ,mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period, including all cost of labour ,material, conveyance,royalties and sundries , T&P etc. complete as per the direction of Engineer-in-charge.
103.14
-
5142.6
Providing and laying of Cement Concrete of grade 1: 3 :6 (1 cement : 3 sand : 6 graded stone aggregate of size 25mm to 40 mm hard granite crusher broken metal ), mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material, conveyance,royalties and sundries ,T & P etc. complete as per the directions of Engineer-in-charge.
69.66
-
5930.2
Providing and laying 80mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. icluding cost of all materials, conveyance, loading, unloading, royalties, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge.
240.11
-
1097
Construction of granular sub-base by providing Close graded Granular subbase Grading-III material as per table 400-1, spreading in uniform layers in specified thickness with motor grader on prepared surface, mixing by mix-in -place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (4th Revision) including cost of all labour,material,equipment, royalty, taxes,sundries and T&P etc. as per the direction of Engineer-in-charge.
377.79
-
1991.5
Supplying, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material to site, laying in uniform layers with paver in subbase/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H Specifications for Road & Bridge works (4th Revision).including cost of all labour, material, equipment, royalty, taxes, sundries and T&P etc. as per the direction of Engineer-in-charge..
377.79
-
1457.23
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete.
377.79
-
6979.5
Providing, lifting, hoisting and laying in position machine batched , machine mixed and machine vibrated design mix cement concrete of M-25 Including the cost of Centering and Shuttering (minimum cement content not less than 403Kg/Cum) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance, taxes, loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement.
-
-
-
Foundation & Plinth Pilecap
4.81
-
6356.8
Grade Beam
27.68
-
6731.9
Column upto plinth
3.51
-
12357.1
Plinth beam
27.62
-
6731.9
Ground Floor Column & Roof Beam
43
-
12357.1
Ground Floor Roof Slab
93.31
-
10715
Ground Floor Staircase
6.26
-
11846.7
Ground Floor Lintel
7.29
-
10082.1
First Floor Column & Roof Beam
6.74
-
13751.4
First Floor Roof Slab
7.75
-
11761.5
First Floor Lintel
2.8
-
10994.8
Providing, fixing in position TMT/Fe-500 reinforcement bars for RCC work of required diameter of approved quality including straightening, cutting, bending, binding, welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing hoisting, lowering and laying including cost of all materials, conveyance, T&P, cost of binding wires of 16 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the specification & direction of Engineer -in-charge. Foundation & Plinth & Ground Floor
330.96
-
8985.9
First Floor
24.03
-
9010.8
Flyash brick masonry in cement mortar (1:6) using flyash bricks having crushing strength not less than 75kg/cm2, immersing the bricks in water before use, splays cutting, circular moulding , corbelling etc. including cost of material, conveyance & royalties, loading and unloading of all materials & cost of all labours ,materials, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge . Foundation & Plinth
200.63
-
4589.1
Flyash brick masonry in cement mortar (1:6) using flyash bricks having crushing strength not less than 75kg/cm2, immersing the bricks in water before use, splays cutting, circular moulding , corbelling etc. including cost of material, conveyance & royalties, loading and unloading of all materials & cost of all labours ,materials, scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge . Ground Floor
63.63
-
4627.4
First Floor
49.71
-
4911.7
Flyash brick masonry in cement mortar (1:4) using flyash bricks having crushing strength not less than 75kg/cm2 with provision of 2nos 6mm dia. M.S. bars at every third course of half brick masonry Immersing the bricks in water before use, splays cutting, circular moulding , corbelling etc including cost conveyance ,,royalties, loading and unloading of all materials & cost of all labour, materials ,scaffolding ,watering & curing ,sundries, T & P etc. complete as per the direction of Engineer-in-charge . Ground Floor
9.04
-
5764.6
Providing fitting and fixing in proper position Seasoned Dressed Sal wood Chaukaths 63mm x 125mm size of best quality in doors of approved design and drawing applying coal tar 2 coats with mixing of antitermite on the wall side surface of the choukath including cutting the grooves in chaukaths as required, with masonry or concrete surface fixing including cost of all materials, labour, conveyance,T&P etc. complete as per direction of Engineer-in-charge. Ground Floor
0.29
-
53421.1
Providing 12mm thick cement plaster to the surface of brick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge Ground Floor
381.56
-
154.2
First Floor
204.07
-
160
Providing 16mm thick cement plaster to the surface of brick masonry wall with cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc all complete as per direction of the Engineer -in-charge Ground Floor
523.25
-
218.3
First Floor
216.39
-
223.4
Providing 6mm thick cement plaster with cement mortar of (1:4) to ceilings of roof slabs, stairs, landings, chajja, shelves, columns, beams and lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves and beads to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading and royalties, all labour, scaffolding, watering and curing , sundries and T&P etc all complete as per direction of the Engineer -in-charge Ground Floor
1503.95
-
168.1
First Floor
136.77
-
172.1
Providing average 25mm thick grading Concrete with (1:2:2) using 6mm hard granite chips mixing of water proofing cement compound of approved quality over top of Roof, Terrace, including cost of scaffolding, scraping and cleaning the roof surface, plastering and finishing smooth to proper slope and gradient including cost of all materials, conveyance, taxes and sundries, T&P etc. All complete in all respect as per direction of the Engineer -in-charge. Terrace
790.99
-
329.5
Supplying and applying an elastic liquid, crack bridging 2 pack acrylic polymer modified cementitious waterproofing coating system conforming to IS 2625,IS 101 and ASTM D 2370 in two coats in the Toilet portions. The surface should be dampen immediately ahead of the compound application. Whilst the surface is still damp from saturation a first coat of the waterproofing primer is applied then followed by a single coat of the waterproofing compound and leave to harden for 2-6 hrs.After the application of the first layer of the coating another fabric coating is spread over it, which is again followed by a final & top coat of the water proofing compound. Proper curing must be done after application of the waterproofing system for a minimum of 3 to 5 days to ensure full cement hydration and to minimize cracking. Generally 0.7 kg and 1.5 kg of the compound is used to cover one square meter of area in the first coat and second coat respectively..The cost is inclusive of materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing , sundries and T&P etc all complete as per direction of the Engineer -in-charge. Ground floor (Toilets)
42.51
-
269.7
Providing and fixing Vitrified tile of specified size in floors on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 sand) with neat cement slurry . finishing the joint with epoxy based water proof grout to match the shades of the tiles etc.including cost of all materials,labours & royalties, conveyance ,loading and unloading ,sundries ,T & P etc .complete as per the specification & direction of Engineer-in-charge. Ground Floor
330.88
-
981.4
Providing & laying vitrified tile of specified size in skirting cut from approved make confirming to IS-15622 specifications over 12mm thick cement mortar (1: 3) to proper line and level to a height as per design including cutting to required size and shape, fixing at corners and splays etc. including finishing the joints with epoxy based water proofing grout to match the color and shade of tiles and complete as per the design & drawing with cost of all materials, labour, conveyance T&P etc. All complete as per the direction of Engineer -in-charge. Ground Floor
12.1
-
1101.4
Providing & laying granite in floor using 16-18mm thick granite slab of approved quality, colour and size over 20mm thick cement mortar (1:4) and finishing the joints with epoxy based water proofing grout to match the colour & shade of tiles including cutting to shape, grinding and wax polishing, cost of all labour, materials, royalties, loading and unloading, conveyance, sundries, watering and curing etc. complete as per drawing and direction of the Engineer -in-charge. Ground Floor
273.23
-
2233.4
Providing & laying granite in Skirting using 20mm thick granite slab of approved quality, colour and size over 12 thick cement mortar (1:3) and finishing the joints with epoxy based water proofing grout to match the colour & shade of tiles including cutting to shape, grinding and wax polishing, cost of all labour, materials, royalties, loading and unloading, conveyance, sundries, watering and curing etc. complete as per drawing and direction of the Engineer -in-charge. Ground Floor
8.04
-
1653.7
Providing and fixing 16-18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite slab for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Ground Floor
4.74
-
2233.4
Providing & laying best quality Anti skid Ceramic floor tile of size 300x300 mm of approved make confirming to IS-15622 specifications in floor over 20mm thick cement mortar (1: 4) to proper slope, line and level including cutting to required size and shape, fixing at corners and splays etc. Including finishing the joints with epoxy based water proofing grout to match the color and shade of tiles complete as per the design & drawing with cost of all materials, labour, conveyance T&P etc. All complete as per the direction of Engineer -in-charge. Ground Floor
42.51
-
709.8
Providing and fixing 300 x 600 ceramic glazed wall tiles of approved size conforming to IS: 15622 specifications of approved make and shade, in skirting and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and finishing the joint with epoxy based water proofing grout to match the shade. All complete as per the direction of Engineer-in-charge Ground Floor
96.82
-
791.4
Providing and fixing cement concrete tiles of average 22 mm thick jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).as per the design & drawing with cost of all materials, labour, conveyance, T&P etc. All complete as per the direction of Engineer -in-charge. Ground Floor
182.29
-
520.4
Providing and fixing 12 mm thick frameless toughened etched glass door shutter of approved brand with machine polished edges, including top & bottom pivot & spring type fixing with an approved make including 450mm Stainless steel handle QBGHL-5(H-Handle),QBPF-3(TOP 1500mm long),QBPF-3(BOTTOM 1500mm long),Double cylinder floor spring(QBFS-74) as approved by the EIC with all arrangements and making necessary holes etc. all complete, including all cost of labour, material, conveyance, T&P etc.as per direction of Engineer-in-charge Ground Floor
16.26
-
8398.7
Providing and fixing 12 mm thick frameless toughened etched glass Partition of approved brand with machine polished edges including top & bottom patches,QBPF-3(TOP 1500mm long),QBPF-3(BOTTOM 1500mm long), as approved by the EIC with all arrangements and making necessary holes etc. all complete, including all cost of labour, material, conveyance, T&P etc.as per direction of Engineer-in-charge Ground Floor
41.17
-
5359.6
Providing and fixing ISI marked both side laminated flush door shutters confirming to IS 2202(Part1) made out of 32mm thickness flush door with 1 mm laminate on both sides including ISI marked necessary hardware fitting with approved hardware fittings such as,SS Concil Hinges ,stopper,Door magnet,SS Tower bolt,Mortise lock body,Mortise lock pin Cylinder,Mortise lock-Front side door pull handel and back side on rose handel etc. All exposed wooden surface shall be painted with two coat of enamel paint over one coat of primer/polish with melamine finish including cost of all labours, materials, conveyance, hardware fitting & fixing,loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge. Ground Floor
7.81
-
8065.2
Providing and fixing ISI marked one side laminated and one side paint flush door shutters confirming to IS 2202(Part1) made out of 32mm thickness flush door with 1 mm laminate on one side including ISI marked necessary with approved hardware fittings such as Hinges,Tower bolt,aldrop,handle etc. including cost of all labours, materials, conveyance, hardware fitting & fixing,loading and unloading, all taxes and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge. Ground Floor
3.25
-
6510.2
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer using M.S. angles 40x40x6 mm for diagonal braces Headroom
3.9
-
3029.8
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover
8.92
-
2362
Supply and fixing of uPVC Sliding glazed Window made out of hollow multi-chambered uPVC sections having isolated drainage system with the design 2 Track 2 Panel System. The 2 track outer frame of the window having over all size of 60 x 58 mm having internal wall thickness of 2.50 mm. The glass sashes / shutters shall be made out of Upvc sections with over all size of 42 x 70 mm with internal thickness of 2.50 mm. The mosquito mesh shutter having over all size of 25 x 52 mm with internal wall thickness of 2.50 mm. Reinforcement of galvonised mild steel with thick ness of 1.50 mm has to put through out the Frame, glass shutter and mesh shutter. Glass support beading make of upvc sections will be fixed with EPDM gaskit to keep glass tight and unmoved. Single point locking system (called touch lock) made out of casted zamac with white powder coated and locking hook will make of SS 304 grade material. Aluminum guide rail will be fixed on the Bottom part of frame on which the glass shutters will run. The roller will make of nylon an having capacity of 40 - 120 kg depends on glass weight. Finseal will be provided to protect the dust in between closing point & interlocking point of glass & mesh shutters. The Interlock of the uPVC window should be approved by the Engineer-in- charge before fixing. Glass thickness and colour can be changed as per requirement. Ground Floor
4.65
-
6648.8
Supply and fixing of uPVC Top Hung glazed uPVC ventilator made out of hollow multi chambered uPVC sections having isolated drainage system with the design Casement (Outside open) The casment frame of the window having over all size of 60 x 52 mm having internal wall thickness of 3.00 mm. The glass panel shall be made out of Upvc sections with over all size of 52 x 78 mm with internal thickness of 3.00 mm. Reinforcement of galvonised mild steel with thickness of 1.20 mm has to put throughout the frame, glass panel. Glass support beading make of upvc sections will be fixed with EPDM gaskit to keep glass tight. Single point locking system (called Cockspur) made out of casted zamac with white powder coated and Friction and Stray Hinges will be made of SS 304 grade material. Multipoint locking system (called Espag) made out of casted zamac with white powder coated can be used if height goes beyond 4.50 feet. The model and brand of the uPvc window shall be approved by the Engineer -in- charge before fixing. Glass thickness and colour will be change as per requirement. Ground Floor
2.05
-
4949.1
Supply and fixing of uPVC Ventilator glazed Louvers made out of hollow multi-chambered uPVC sections having isolated drainage system with the design Movable Louvers with Exhaust Provision. The frame of the window having over all size of 45 x 45 mm having internal wall thickness of 2.25 mm. The glass holding made out of Aluminum square sections with white powder coating with over all size of 45 x 25 with internal wall thickness 2.25 mm. Reinforcement of galvonised mild steel with thickness of 1.20 mm has put throughout the frame. Glass will be frosted 5 mm. .The rates shall be inclusive of all cost of materials,labour,T&P etc. complete. Rates are inclussive of all cost of materials, labour, conveyance, loading & unloading, taxes and T&P etc. complete as per the direction of EIC. Ground Floor
2.23
-
4449.2
Supplying, Fitting and Fixing M.S Grills of approved design and drawing made of with M S Flat, Square bars/Round bars with necessary welded clamps fixed in proper position & plumb including two coats of enamel paint over a single coat of priming of approved quality metallic primer, making required holes in Masonary Walls / R.C.C Structures (where necessary) and grouting the clamps with C.C(1:2:4) with 12mm size black hard crusher broken granite stone chips, making good to the damages of Masonary Walls / R.C.C Structures ,including the cost of all material, labour, conveyance, taxes, loading and unloading ,sundries and T&P,complete as per the direction of Engineer in charge.Ground Floor
75
-
58.2
Supplying ,fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90 mtr ,c/c and 12 mm toughen glass as per the design and detail , balcony ,utility an etc. as per approved design and specification , buffing, polishing etc with cost ,conveyance of all materials,labours,T&P etc complete in all respect as per the direction of Engineer-in-charge. Ground Floor
67.88
-
2822.2
Painting with synthetic enamel paint of approved colour, shade and brand on New wood work in two or more coats as required to give an even shade including an under coat of suitable primer of approved brand and manufacturer including cost of all materials and transportation, loading, unloading, scaffolding, all labour, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge including filling gaps with putties, scrapping, sand papering and cleaning the surface to make free from rusts, dusts and oily substances before applying primer etc. complete. Ground Floor
49.03
-
200.5
First Floor
7.81
-
205.7
Wall painting with two or more coats of Plastic emulsion paint of approved brand and manufactures to give an even shade over a coat of putty and primer of approved brand :etc.including cost of all labours, materials, conveyance, loading and unloading and royalties, sundries and T&P etc all complete as per direction of the Engineer -in-charge. Ground Floor
1885.51
-
214.9
First Floor
340.84
-
219.4
Painting two coats with Water soluble weather coat paints of approved shade of approved make or equivalent over out side brick wall over a coat of primer, by means of brush to outside surface of new walls after scraping, cleaning the surface including all cost of materials, labour, watering & curing T&P etc complete as per direction of Engineer -in-charge. Ground Floor
523.25
-
139.8
First Floor
216.39
-
145.1
Providing one coat of Textured finish of approved make, quality and shade over the wall surface of the building over a coat of primer of approved make including cost of material, brushes, all labour,loading, unloading, scaffolding, T&P etc. as required for the work as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use) Ground Floor
523.25
-
142.8
First Floor
216.39
-
148.1
Providing & Fixing of 6 mm Thick HPL (ALSTRONG MAKE ) as Plank Manner having width 600 mm on the Back up structure of 1.5 mm Thick (2”x1”) Tube ( ZINDAL MAKE ) using Fasteners ( Fischer Make )( 10x100) , Fischer Screw , both being used on Aluminum Angle (1.5”x1”) within an interval of 600 mm on which HPL will be fixed using Rivet in an interval of 600 mm along with the cost of Labor Charges , Carrying and all the other outfits required at site .
480
-
3484.5
Providing and fixing Terracotta Clay Jali in size of 200 mm x 200 mm x 75 mm, in approved pattern and design. The fixing of clay jali should be done with M.S Galvanized Clamps, fixtures and fasteners of Hilti / Fischer or with Kerakoll or its equivalent adhesive.
120
-
3484
Design, Supply, fabrication & erection of Structural Glazing systems by using Extruded Aluminium sections of grade 6061-T6 or 6061-T6 or 6005-T6 conforming to ASTM : GS11A duly powder coated / anodized up to 20 Micron /35 micron PVDF coated respectively in approved shade and 9304 section 105.mm x 55.mm x 1.8mm thick as Mullion & Transom as per product catalogue No:B-8667 of OEL(Alom) make and sub frame of 19x 19 x .08.mm Alunimium Square Tube ( if required) along with Aluminium Angle and Z sections for openable portions, fixed to existing RCC Beam / column at floor to floor by MS Galvanised Clamps & HD Nuts & Bolts as required and approved expansion fasteners of Hilti/ Fischer or equivalent make having 6mm Heat Reflective Soft Coated Solar Control ST- 467 Toughened Glass of Saint Gobain make, to be fixed with Norton tapes and Structural silicon sealant & weather silicon of Dow Corning/GE/JL or equivalent make at all interfaces with building structure in between joints to make leak proof glazing with necessary hardware having required grid size as per approved drawing & design of Inform Architect, complete in all respect including all cost, conveyance, loading, un-loading, materials, labours, T&P etc as directed by the Engineer-in-charge.
60
-
5500
Providing and fixing Glass Reinforced Concrete (G.R.C) Screens in approved size, pattern, design, shadeand thickness of 50mm on frame and design element in 30mm thick have weight approximately between 3.5 – 4 Kg per Sq. Ft. and color of M/S Urban stone make or equivalent. The above weight and thickness is considering dimensions of screens up to 2133mm in height and 1219mm in width and having at least 50% void space. The screens should be made from ‘53 grade’ White Portland Cement manufactured by ‘JK Cement’ or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by ‘N.E.G JAPAN’ or equivalent, Super Plasticizers manufactured by ‘BASF’ or equivalent, Polymers manufactured by ‘BASF’ or equivalent and U.V resistant Synthetic inorganic pigments should be used for pigmentation. The material casting should take place in FRP Molds. The fixing of Screens should be ‘Dry fixing’ i.e. to be done with M.S Galvanized Clamps, fixtures and fasteners of Hilti / Fischer.
80
-
2500
Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete
257.58
-
580.67
Supplying and stacking sludge at site including royalty and carriage upto 5 km complete
257.58
-
206.83
Spreading of sludge, sand and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
512.97
-
27.35
Grassing with selection No. 1 grass including watering and maintenance of the lawn for 60 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and earth shall be paid for separately).
1691.05
-
62.17
EI Wiring for light point/ fan point/ exhaust fan/wall fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box including supplying the same and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. Group A
120
-
943
Group B
60
-
973
Group C
40
-
1002
Calling Bell Point-(Group A)
10
-
943
Secondary Point .(Looping Point) (Controled by same switch-Gr.A wire Only)
150
-
372
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire for 6A PP looping .
300
-
124
2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire for 15A PP & Switch Boards & Computer points
150
-
138
2 X 4.0 sq. mm + 1 X 2.5 sq. mm earth wire for AC Point.(1,1.5,2,2.5)
100
-
162
2 X 6.0 sq. mm + 1 X 4 sq. mm earth wire for AC Point.(3,4)
100
-
193
4 X 4 sq. mm + 2 X 2.5 sq. mm earth wire for L .DB ,Ext. LDB & C.DB
50
-
238
4 X 6 sq. mm + 2 X 4 sq. mm earth wire for P.BDB,Kitchen PP
40
-
301
4 X 10 sq. mm + 2 X 6 sq. mm earth wire for P.BDB,VRF AC
50
-
433
4 X 16 sq. mm + 2 X 10 sq. mm earth wire for P.BDB,VRF AC
50
-
620
2 X 10.0 sq. mm + 1 X 6.0 sq. mm earth wire AC Point.
60
-
259
Supplying and drawing following pair 0.5 sq mm FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair
150
-
38
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
100
-
39
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 25 mm
27
-
133
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm
100
-
91
25 mm
100
-
93
32 mm
50
-
100
Supplying and fixing metal box of 1.63 mm thick following sizes (nominal size) on surface or in recess without cover including cutting the wall and making good the same in case of recessed conduit ,also including painting etc as required. 75 mm X 75 mm X 60 mm deep
27
-
106
100 mm X 100 mm X 60 mm deep
18
-
117
150 mm X 75 mm X 60 mm deep
5.4
-
123
200 mm X 125 mm X 60 mm deep
3.6
-
162
250 mm X 300 mm X 60 mm deep
18
-
279
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.
30
-
477
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3nos 3 pin 5/6 amps modular socket outlet with 2nos 5/6 amps modular switch, connection etc. as required.
30
-
1090
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2nos 3 pin 5/6 amps modular socket outlet with 2nos 5/6 amps modular switch, connection etc. as required.
20
-
821
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
40
-
610
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 25 amps modular switch, connection etc. as required.
20
-
457
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 25 amps modular Socket , connection etc. as required.
20
-
561
Supplying and fixing of Telephone socket out let with suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing , connection etc. as required.
20
-
252
Supplying and fixing of TV antenna socket out let with suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing , connection etc. as required.
10
-
252
Installation, testing and commissioning of wall bracket /ceiling fittings /LED down light of all sizes and shapes containing upto two GLS lamps per fitting, complete with all accessories including connection etc. as required.
50
-
80
Supplying and fixing brass batten/ angle holder including connection etc. as required.
2
-
57
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.
2
-
119
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.
20
-
114
Installation, testing and commissioning of ceiling fan on down rod or wall fan on the existing ceiling /surface, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required.
20
-
119
Installation of exhaust fan with shutters/louvers in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep
15
-
586
Installation, Testing and Commissioning of resistance type ceiling fan regulator, in existing box including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor, earthing the regulator as required.
15
-
68
Supplying and fixing of support arrangement for fixing of cable tray, light fittings ,Panel Board etc with MS angles / flats / rods /anchor flashner/extra rod for fan & Lights including jointing the steel sections of the support arrangement with nuts & bolts / welding / Febicating complete as required .
180
-
109
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door
10
-
2151
6 way (4 + 18), Double door
8
-
2494
8 way (4 + 24), Double door
1
-
2686
Supplying and fixing following way, Vertical type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 182), Double door
2
-
10915
6 way (4 + 18), Double door
2
-
12396
8 way (4 + 24), Double door
1
-
13638
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc.
as required. (But without MCB/RCCB/Isolator) 8 way (2 + 6), Double door
2
-
1617
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
150
-
129
Single pole & Neutral
2
-
330
Triple pole & Neutral
2
-
876
Supplying and fixing following rating, Four pole, 440 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps
2
-
568
Supplying and fixing following rating, four pole, (three phase andneutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 amps
13
-
2225
40amps
5
-
2629
Supplying and fixing following rating, double pole, (single phaseand neutral), 240 V, residual current circuit breaker (RCCB),having a sensitivity current 300 mA in the existing MCB DBcomplete with connections, testing and commissioning etc. as required. 25 amps
2
-
1682
Supplying and fixing following rating, four pole, neutral), 415 volts, Module case circuit Breaker (MCCB),
having breaking capasity of 16KA in the existing
MCCB DB / Panel Board complete with connections, testing and commissioning
etc. as required. 100/125 A ,16 KA MCCB
3
-
3232
160 A ,16 KA MCCB
2
-
5264
Supplying the following Size PVC/ XLPE insulated PVC seathed Alluminium aromour cable of 1.1 kV as per IS 1554 etc as reqd. a- 4 core 10 sq.mm
27
-
134
a- 4 core 16 sq.mm
45
-
154
a- 3 1/2 core 25 sq.mm
40
-
194
a- 3 1/2 core 35 sq.mm
13.5
-
231
a- 3 1/2 core 50 sq.mm
40
-
299
a- 3 1/2 core 70 sq.mm
13.5
-
407
a- 3 1/2 core 95 sq.mm
90
-
491
a- 3 1/2 core 150 sq.mm
45
-
727
a- 3 1/2 core 185 sq.mm
9
-
907
a- 3 1/2 core 300 sq.mm
9
-
1399
Supplying & termination of 3cx2.5sqmm flat Size PVC/ XLPE insulated PVC seathed bare bunch copper Submerisible cable of 1.1 kV as per IS :694/2010 etc as reqd.as per EIC.
150
-
102
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Above 25 sq. mm and upto 120 sq. mm
200
-
120
Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of following sizes direct in ground including excavation , filling the trench etc. as required but excluding cushioning , protective covering. upto 25 sq. mm
300
-
122
Above 25 sq. mm and upto 120 sq. mm
45
-
136
Above 120 sq. mm and upto 400 sq. mm
18
-
150
Supplying and making end termination with brass compression gland and aluminium lugs/copper for following size of PVC insulated and PVC sheathed / XLPE aluminium/copper conductor cable of 1.1 KV grade as required. a- 4 core 10 sq.mm
2
-
170
a- 4 core 16 sq.mm
4
-
185
a- 3 1/2 core 25 sq.mm
8
-
307
a- 3 1/2 core 35 sq.mm
2
-
310
a- 3 1/2 core 50 sq.mm
6
-
325
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
6
-
5022
Earthing with CU earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
6
-
7313
Supplying and laying 25 mm x 5 mm CU earth strip ISI marked at 0.5 meter below grond level as strip arth electrode including soldering etc. as required
90
-
462
Supplying and laying 25 mm x 5 mm G.I earth strip ISI marked at 0.5 meter below grond level as strip earth electrode including soldering etc. as required
90
-
65
Supplying of of Exhaust fan 250 mm dia suitable to work on 230/250 volts, 50HZ complete with mounting FRLSame and louvers including making the hole to suit the size of above fan, making good the damage, connections, with 1.5 sq.mm PVC insulated, copper conductor, single core cable etc as per EIC of approved make including with all,., materials & labour..(Make Usha-Crisp Air or Equiv.-HYBEC/Havells/Bajaj)
10
-
1476
Supplying of 1200 mm energy efficient ceiling fan as per EIC of approved make including with all,., materials & labour. .(Make Usha-Striker or Equiv.-HYBEC/Havells/Bajaj)
30
-
1950
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required
30
-
382
Supply, Installation, Testing, and commissioning of 400mm Wall mounted fan complete with 1.5 sq.mm PVC insulated, copper conductor,single core cable etc as required as per EIC.(Make -Usha-Mistair, /Equiv HYBEC / Havells /Khaitan )
10
-
2361
Supply, Testing & commissioning of Surface or wall mounting 1 x 20W LED tube light fitting including 1 no. of 20watt LED luminairs as per EIC of approved make including with all,., materials & labour.. (Make WIPRO-Model-LL20-221-XXX-65NE3 make Philips /HYBEC/ Wipro/ HAVELLS)
10
-
804
Supply, Testing & commissioning of Surface or wall mounting 1 x 10W LED tube light fitting including 1 no. of 10watt LED luminairs as per EIC of approved make including with all,., materials & labour.. (Make WIPRO-Model-LL20-111-XXX-65NE3 make Philips /HYBEC/ Wipro/ HAVELLS)
4
-
520
Supply, Testing & commissioning of of decorative angle / Batten Holder fitting complete with 1 no of 9/10 watt LED Lamp(White) as per EIC of approved make including with all,., materials & labour.(Lamp Make : PhilipsHYBEC/Havells/Wipro/Philips )
4
-
227
Supply, Installation,Testing & commissioning of Recess mounted squre LED Luminaire with complete diffuser with for 1 x33W LED inluding of approved make complete with all materials & labour(Make :Wipro,Cat No.-CRCO10R033HP57UGR/Equiv.-HYBEC/Philips/Havells)
15
-
5335
Supply, Installation,Testing & commissioning of recess mounted round White LED downlighter with pressure die cast aluminium housing & PMMA diffuser suitable for 9/10W LED fitting includded luminairs of approved make complete with all materials & labour..(Make :Wipro,Cat No.-LD90-111-XXX-65-XX */Equiv.-HYBEC/Philips/Havells)
15
-
1315
Supply, Testing & commissioning of Surface mounting 1 x 12W LED surfae mounted circular/squre down light fitting with powder coated polycarbonate housing including 12watt LED luminairs as per EIC of approved make including with all,., materials & labour.. (Make WIPRO-Model-LD80-101-XXX-60-SM /SS make of Philips /HYBEC/ Havells)
10
-
1233
Supply, Installation,Testing & commissioning of recess mounted round Warm White LED COB spot downlighter with aspecial frosted diffuser suitable for 6W LED fitting including 6 watt LED luminairs of approved make complete with all materials & labour..(Make :Wipro,Cat No.-LD98-131-024-40-XX*/Equiv.-HYBEC/Philips/Havells)
10
-
869
Supply, Installation,Testing & commissioning of Flexible Warm White LED strip Light of 15W/Spoolwith Driver for cove lighting including all other materials as required.(Make :Wipro,Cat No.-LS06-015-120-WW-50/Equiv.-HYBEC/Philips/Havells)
40
-
658
Supply, Testing & commissioning of wall mounting 1 x 10W LED wall mounted IP-65 bulk head fitting including 10watt LED luminairs as per EIC of approved make including with all,., materials & labour.(Make WIPRO-Model-LW07-141-XXX-57-XX/SS make of Philips /HYBEC/HAVELLS)
5
-
1778
Supply, Testing & commissioning of 24W LED 2way Up/Down Light including all other accessories & labour etc as per EIC.(Make WIPRO-Model-LW31-321-022-30-XX make of Philips /HYBEC/HAVELLS)
4
-
23898
Supply, Testing & commissioning of recess mounted ruund 20 Watt LED-Adjustable dimmable DownLight with aspecial frosted diffuser including 20W LED fitting & dimming system of approved make complete with all materials & labour.(Make Wipro LD56-251-036-40-XX make of Philips /HYBEC/Havells)
10
-
3309
Supply, Installation,Testing & commissioning of 100W flood light with aluminium die cast housing luminaire with unique lens system for uniform illumination and toughened glass with silicon gasket for IP-66 protection including 100W LED luminaire of approved make complete with all materials & labour.(Make Wipro LF20-122-060-57-G2 make of Philips /HYBEC/HAVELLS)
4
-
11639
Supply, Testing & commissioning of Recess / Surface mounted LED Luminare including 31W LED fitting (TTL Type) complete with all materials & labour..(Make :CRCO13S038HP57G1 */Equiv.-HYBEC/Philips/Havells)
5
-
6428
Supply,Testing & commissioning of Circular suspended full diffuser LED Luminare including 26W LED fitting with adjustable suspension system as required of same make complete with all materials & labour..(Make :Wipro,Cat No.-LM71-341-XXX-57-G1 */Equiv.-HYBEC/Philips/Havells)
3
-
9737
Supply, Testing & commissioning of suspended /recessd LED Linear Luminare including 30W (4')LED fitting with adjustable suspension system as required of same make complete with all materials & labour.(Make :Wipro,Cat No.-LM34-361-XXX-57-WG1 */Equiv.-HYBEC/Philips/Havells)
4
-
7470
Supply, Testing & commissioning of COB LED Midbay light including 65W LED fitting complete with all materials & labour.(Make :Wipro,Cat No.-LM34-361-XXX-57-WG1 */Equiv.-HYBEC/Philips/Havells)
7
-
11308
Supply, Testing & commissioning of wall mounting 1 x 12W LED Mirrior light fitting with chrome body including 1 no. of 12watt LED luminairs as per EIC of approved make including with all,., materials & labour.(Make JAQUAR-Model-KBW-CHR-MB48022A/SS make of PhilipsHDL /HAVELLS/ Wipro/ )
6
-
4177
Supply, Installation,Testing & commissioning of IP-65, LED Garden Spike Light including 1 no. of 6 watt LED luminairs & Base with Brick Masonry work(200x200x200)mm for the above fitting as per EIC of approved make including with all,., materials & labour.. .(Make :Wipro,Cat No.-LF05-450-036-27-XX/Equiv.-HYBEC/Philips/Havells)
10
-
6071
Supply, Installation,Testing & commissioning of IP-65, 800MM Bollard Light with symmetrical light distribution including 1 no. of 7 watt LED luminairs & Base with Brick Masonry work(300x300x300)mm for the above fitting as per EIC of approved make including with all,., materials & labour .(Make :Wipro,Cat No.-LB13-880-XXX-65-08 */Equiv.-HYBEC/Philips/Havells)
15
-
7809
Supply, Installation,Testing & commissioning of IP-65,Clear Glass Post Top Light with symmetrical light distribution including 1 no. of 20 watt LED luminairs as per EIC of approved make including with all,., materials & labour. ((Make :Wipro,Cat No.-LP07-251-XXX-57-CL/Equiv.-HYBEC/Philips/Havells)
15
-
5534
Supply, Installation,Testing & commissioning of 3.5mtr Decorative hot dipped galvanised mild steel step pole with grey powder finish with base & Base with Brick Masonry work(450x450x450)mm for the above Pole as per EIC of approved make including with all,., materials & labour.. (Make HAVELLS-Model-LHMP02135099/SS make of Philips /HYBEC/ Homedec/ HYBEC)
12
-
15603
Supply,Testing & commissioning of 2W LED IndoorFoot/Floor washer light as per EIC of approved make including with all,., materials & labour.. (Make PHILIPS HDL-Model-30974/SS make of JAQUAR / Wipro/ Havells
5
-
662
Supply, Installation,Testing & commissioning of 8 channel relay unit of approved make complete with all materials & labour.(Make :Wipro,Cat No.-498/Equiv.-HYBEC/Philips/Havells)
1
-
72279
Supply, Installation,Testing & commissioning of Scene control front facia of approved make complete with all materials & labour.(Make :Wipro,Cat No.-191GW*/Equiv.-HYBEC/Philips/Havells)
1
-
33871
Supply, Installation,Testing & commissioning of illustis Dali interface of approved make complete with all materials & labour.(Make :Wipro,Cat No.-290W/Equiv.-HYBEC/Philips/Havells)
1
-
26075
Supply, Installation,Testing & commissioning of illustis Switch unit Module of approved make complete with all materials & labour.(Make :Wipro,Cat No.-232S/Equiv.-HYBEC/Philips/Havells)
1
-
11282
Supply and Laying of Single Mode 12 Core ADSS ( All Dielectric self supporting) construction OFC on the existing HDPE pipe/Tray/Wall surface etc as reqd.
60
-
65
Supply laying of Cat6A LSZH horizontal cable following proper EIA/TIA standards in the PVC conduit etc as reqd. a) 1 run of cable
60
-
59
b) 2 run of cable
60
-
92
c) 3 run of cable
61
-
124
Supply installation testing and commssioning of Cat6A loaded 24 port patch pannel on the existing rack etc as reqd.
5
-
8500
Supply and fixing of Cat6A Keystone Jack on existing face plate & back box including testing etc as reqd.
30
-
230
Supply installation testing and commssioning of Cat6A information outlets single port face plate etc as reqd.
30
-
70
Supply installation testing and commssioning of following Patch cords as reqd Cat6A 2 Mtr LSZH Patch cords
20
-
230
Cat6A 1 Mtr LSZH Patch cords
20
-
195
Supply installation testing and commssioning of Cat6A Industrial 3 pc toolless RJ-45 plug etc as reqd.
8
-
550
Supply installation testing and commssioning of 24 Port SM loaded LIU at designated Network Rack
2
-
7499
Supply installation testing and commssioning of 12Port SM loaded LIU at designated Network Rack etc as reqd.
2
-
5799
Supply /Fixing of 3 Mtr Single Mode SC-LC patch cord between LIU and Transreceiver etc as reqd.
3
-
1250
Supply installation testing and commssioning of 42U 800 x 1000 mm perforated server racks with accessories & 2 nos15 x 6/16A power socket, FAN, Cable manager etc complete as reqd.
1
-
49000
Supply installation testing and commssioningof 24U Rack 600x600 with PDU FAN accessories complete etc as reqd.
1
-
21343
Supply installation testing and commssioning of 12U Rack 600x600 with PDU FAN accessories complete as reqd.
2
-
9350
Supplying and drawing following pair 0.5 sq mm FR PVC insulated annealed copper conductor, unarmored telephone cable in the surface/ recessed steel/ PVC conduit as required. 2 Pair
46
-
35
20 Pair
45
-
205
S/F DP box suitable for above as reqd 50 Pair
4
-
4500
200 pair
1
-
10000
Supply installation testing and commssioning SIP based hardened IP EPABX with 8FXO and 2FXS and 500 user SIP Lic with all required accessories etc as reqd.
1
-
120000
Supply installation testing and commssioning Basic SIP Backlit IP Phone as reqd. (Model to be decided by Engineer in charge)
10
-
3500
Supply installation testing and commssioning Executive SIP Backlit IP Phone (Model to be decided by Engineer in charge)
4
-
7499
Supply installation testing and commssioning SIP Baed IP video Phone (Model to be decided by Engineer in charge)
3
-
23000
Supply & laying of Cat6A LSZH horizontal cable following proper EIA/TIA standards in the PVC conduit as reqd.
50
-
65
Supplying the following Size PVC insulated PVC seathed Alluminium aromour cable of 1.1 kV grade as per IS 1554 etc as reqd. a) 4 core 10 sq.mm
30
-
85.28
b) 3 core 6 sq.mm
279
-
79.54
c) 3 core 1.5 sq.mm weather proof sub mersible cable Copper
175
-
60.68
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, without protective covering and refilling the trench etc as required. a) Size not exceeding 35 sq.mm
200
-
264.86
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, but excluding protective covering and refilling the trench etc as required. a) Size not exceeding 35 sq.mm
70
-
86.1
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. a) Size not exceeding 35 sq. mm
101
-
25.42
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a) 3 core 6 sq.mm
20
-
162.36
a) 4 core 10 sq.mm
2
-
179.58
Provisin and making CC foundation of 1:2:4 cement/Sand/Stone agreegate, suitable for erection of above street light pole with neat plastering the surface, curing the surface, including excavation of soil, refilling, spreading the extra soil to a distance of 50 meter away i/c cleaning the site etc as reqd.
4
-
6190.18
S/F 210 x 190 x 75 mm PVC loop in loop put box with sitable mountig arrangement on tubular poles for connection of cable including supplying and fixing 10A MCB, neutral link, earth bar, making connection etc as reqd.
4
-
815.9
Supplying and laying 8 SWG dia GI wire along with cables in exsting surface/ cable trench including making connection for loop earthing as reqd.
275
-
26.24
Supplying and Fixing GI octagonal pole with built in loop box, suitable earthing terminal, (Galvanisation shall be as per relevant IS) of following specification and as per IS: 2713 ( Part – I, III ) : 1980 and of tested quality of steels of minimum tensile strength 540 MPa suitable for fixing the street light i/c transportation, painting with minimum 2 coat of silver oxide paint, earthing the body testing, commissiong etc as reqd. Poles shall be well-finished, clean and free from harmful surface defects. Ends of the polesshall be cut square. Poles shall be straight, smooth and octagonal. No weld joints permitted, if any,shall be of good quality, free from scale, surface defects, cracks, etc with permission of Engineer in charge. 7.0 mtr Pole with GI Base plate of minimum 12 mm Thick, Wt - 87 kg.
19
-
12054
Supplying and Fixing the following size medium gauge GI mast arm pole bracket for fixing the luminair on the existing pole structure of approved design including making suitable fixing arrangement, with supplying nuts , bolts etc i/c painting etc as reqd. a) Single curve 40 mm dia of 2 mtr length
15
-
943
a) Double curve 40 mm dia of 2 mtr length each
1
-
1435
Providing and fixing black painted galvanized decorative post with built in loop box suitable for fixing following LED/CFL decorative light fitting for yard illumination as reqd. (As desired by Engineer in charge) a) Lighting pole 4270 mm Ht (Single Bracket) (Model Tusker Rana of K lite or SS make) (For Inside Road)
2
-
14422.98
b) Lighting pole 4270 mm Ht (Double Bracket) (Model Winger of K lite or SS make) (For Parking area)
2
-
20228.58
c) Lighting pole 3660 mm Ht (Double Bracket) (Model Pelican Oma of K lite or SS make) (For Garden)
2
-
22616.42
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required a) 40 mm dia
10
-
301.76
b) 32 mm dia
15
-
265.68
c)63 mm dia (OD-63 mm & ID-51 mm nominal)
100
-
89
Supplying following LED lamp fitting with lamp unit suitable for mounting on surface/wall/ the above ploe including fixing on the pole making connection with suitbale size copper wire/ lugs and sockets, earthing, making testing commissiong etc as reqd. ( Make: Philips/K-lite/ Wipro or SS make) a) LED Light for garden light 18W LED , (pelican Mini of K lite or SS make) (colour - White/red/Yellow/ Green) with lamp
4
-
5166
b) LED walk over light for path way lighting 3 watt with extruded alluminium housing and adjustable mounting bracket (colour - White/red/Yellow/ Green) with lamp
6
-
1795.8
c) LED bush & spike luminair 7 watt with extruded alluminium housing and adjustable mounting bracket with lamp
12
-
2870
d) Copper dust painted die cast alluminium post top suitable for 15 watt LED lamp with Driver for outdoor installtion (make: K- lite/ Ss make)(Gate light)
2
-
7134
e) LED street light luminair of 24-25 watt suitable for outdoor installation IP 65
4
-
3258.68
f) LED street light luminair of 45-48 watt suitable for outdoor installation IP 65
25
-
4018
g) Bollard of 475 mm ht. x 100 mm dia (Model Sleek Vera of K lite suitable for 8 watt LED with lamp
6
-
4674
h) Under water fountain light suitable for 9 x 2 watt (Model 4129 of K -lite or SS make)
3
-
15088
PH Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to C-PVC / ASTM-D- 1785/89 (Sch-80) and pipe fittings of the following nominal borewith clamps including making good the wall , ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. in Ground Floor - 20 mm dia C-PVC Pipe.IN GF
25
-
244.6
25 mm dia C-PVC Pipe
35
-
332.9
32 mm dia PVC ASTM pipe IN GF
20
-
247.2
IN SF 40 mm dia PVC ASTM pipe
30
-
345.1
Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar ( 1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. IN GF
8
-
52.5
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per the direction of the Engineer in charge.IN GF
35
-
203.3
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge. (Fixtures make of Brass / G.M / C.P fittings are to be pre-approved by the E.I.C) 15mm dia bib cock (Plaza /Aquatic /Amber)
2
-
622.1
15 mm dia CP long body Bib cock(Plaza /Aquatic /Amber)
2
-
693
15mm dia C.P ANGLE STOP COCK(Plaza /Aquatic /Amber)
8
-
565
20mm dia CP concealed stop cock(Plaza /Aquatic /Amber)
1
-
819
15mm dia CP Extension Piece
15
-
59.3
15mm dia CP Flange
15
-
40.3
15mm dia CP Health faucet(Plaza /Aquatic /Amber)
2
-
555.6
15mm dia CP two way bib cock(Plaza /Aquatic /Amber)
2
-
958.7
25mm dia PVC Ball valve
2
-
286.2
32mm dia PVC Ball valve
2
-
500.6
125mm CP grating
8
-
84.1
15mm dia pillar cock (Plaza /Aquatic /Amber)
6
-
626
Supplying all materials, labour T&P and and fixing 10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main etc all complete as per the specification and direction of the Engineer in charge. 10 Liters capacity PVC cistern with 32mm dia flush bend
4
-
1506.2
Supplying all materials,labour,T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No.13592/1992 to walls with nails,bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification,testing,earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of Engineer-in-charge,110mm dia U-PVC SWR Pipe (Supreme/Ashirvad)
30
-
458.8
110mm dia U-PVC Door Tee
4
-
386
110mm dia U-PVC Plain Tee
5
-
322.7
110mm dia U-PVC Door Bend
4
-
293.6
110mm dia U-PVC Plain Band
4
-
232
110mm dia PVC SWR Clamp/Clip.
20
-
42.8
110mm dia U-PVC Cowl
4
-
58.2
Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge.2000lts tank in SF
2
-
40130.4
Supplying all materials , labour, T&P and fixing Vitreous china water closet ,squatting pan ( Indian type W.C. pan / Orissa pattern squatting pan ) duly embedded in cement concrete 1:5:10 using hard granite metal 4cm nominal size including fixing a pair of vitreous china 250mmx130mmx30mm foot rest, fixing 100mm dia hci 'P' or 'S' trap for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge. 580mmx 440mm size Orissa pan
2
-
2469.9
Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge. European water closet with 'S' trap plain (Parryware / Hindware / Cera Make) Hindware Make Cat No.20079
2
-
3248.3
Supplying all materials, labour, T&P and fixing bowl pattern urinal conforming to IS:771-part-3-1985 of the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge. Stall urinal (Hindware make )
3
-
4529.3
15mm dia urinal spreader
3
-
286.6
32mm dia C.P. dome waste
3
-
128.5
Supplying all materials,labour T&P and fixing viterous squatting plate of following sizes with integral longitudinal flushing pipe including cutting the floor and mending good the danmages .ebedding the plate in 25mm cm(1:8) laid over 150mm cc(1:5:10)using 40mm hard granite metal,including 6mm thick white cement finishing at the top of the urinal fooot plate etc all complete as per specification and direction of the engineer un charge
Squatting urinal of 600mmx350mm(Hindware)
1
-
3023.3
Supplying all materials ,labour ,T&P and fixing Wash basin with hole for pillar taps with cast iron or MS brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. fixing pedestral for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin , fixing 12mm dia CP brass waste etc.all complete as per specification and direction of Engineer-in-charge.
Under Counter basin Hindware Make Cat No.10095
6
-
3868.4
Supplying all materials ,labour ,T&P and fixing CP Soap Holder complete with CP brass brackets fixed to wooden plugs with chromium plated brass screws etc.all complete as per specification and direction of Engineer-in-charge. CP soap holder
8
-
179.7
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted minimum 5m thick on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer in charge.
Big size mirror=6*0.60*0.75
2.7
-
1775.4
Design Mirror
1
-
1566.7
CP Towel ring
6
-
468.6
WB-46x36 with one pair mounting brackets,EWC & Cistern complete with fittings & seat cover,one no.,hinged rail 76cm & 4 Nos.of grab rails 60cm.Mat Code:70002(Matrix set)
1
-
66589.4
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per direction of the Engineer in charge.IN GF
4
-
1296.6
Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 12cm size hard granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge IN GF
4
-
5793.8
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12cm size hard granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge IN GF
2.01
-
7677.1
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.IN GF
134.65
-
172.8
Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge(size 45x30cm of Kajaria/Somany/Johnson/ Orient Bell etc.to be pre-approved by the Engineer-in-charge) In ground floor
116.82
-
920.9
Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge (ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 30cmx30cm special printed series make Kajaria/Somany/Jhonson/ Orient Bell to be pre-approved by the Engineer-in-charge) In ground floor
40.05
-
944.5
Supplying fitting and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of MS tube of 19 gauge thickness and size of 19mmx19mm for stile & 15mmx15mm for top and bolt rails set with PVC door frame(Choukatha)of size 50mmx47mm is made out of 5cm thick sheet properly joined with solvent cement adhesive as per section view with MS square tube of 19mm of 19mm gauge to be inserted inside to give extra structural strength the price is inclusive of all cost of all materials labour,T&P etc.complete in all respect as per direction of the Engineer-in-charge. Solid PVC Shutter - 0.75*2.10 *5=
9.79
-
3279.3
Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.
2.4*0.6*0.075
0.11
-
8431.7
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.
0.08
-
9094.4
Supplying all materials, labour, T&P and providing Granite Plate , treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge.2.4*0.6*2
2.88
-
2078
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 120 PSS UV of size 750x570x1350mm height with water storage capacity 120 liters along with 3 nos of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge.
1
-
131266
Sinking of 150mm dia tubewell through hand boring (water jet ) method .Supplying all materials, labour, T&P and setting up boring equipments including erection of suitable staging for installation of the required size of tube well, dismantling and removing the same after complection of the work, including transportation of the boring equipments, cleaning and levelling the site, excavation of mud pit, channels etc, levelling of site all complete as per direction of Engineer in charge
1
-
12859
Supplying all labour, T&P and transporting the boring pipes, top casing , grouting pipes, P.V.C pipes and fittings, P.V.C well screens, cement, bentonite and gravels etc to the worksite including loading and unloading etc all complete as per direction of Engineer in charge
1
-
1320.6
Supplying all labour, T&P and drilling pilot bore not less than 102mm dia, without casing pipes in all kinds of soils and rocks for the following depths excluding supply of necessary boring pipes including supply of necessary cutting equipments, extra sockets (whenever required) etc and withdrawing the boring pipes, washing and keeping the bore clear for logging if required all complete as per direction of Engineer in charge. Drilling pilot bore from 0 to 360 metres
260
-
1037.1
Supplying all labour, T&P and reaming the pilot bore to the following sizes and depths without casing pipes including withdrawing the boring pipes, washing the bore by means of pipe cylinder etc all complete as per direction of Engineer in charge Reaming 100mm to 150mm dia from 0 to 360 metres
260
-
179.1
Reaming 150mm to 200mm dia from 0 to 360 metres
260
-
212.3
Reaming 200mm to 250mm dia from 0 to 360 metres
260
-
235.2
Supplying all labour, T&P and jointing materials and lowering the 300mm dia top casing pipes into the position and removing the same after use all complete as per direction of Engineer in charge from 0 to 360 metres
1
-
1668.2
Supplying all labour T&P and grouting with cement slurry for saline sealing in the bore around the 150 mm dia PVC casing pipe etc all complete as per the direction of the Engineer in charge.
1
-
5618.8
Supplying all labour, T&P and jointing materials and lowering the pvc casing pipes, fittings and well screens in position, including fitting and fixing of centraliser, cutter plug and washing the bore all complete as per direction of Engineer in charge 150mm dia PVC casing pipe from 0 to 360 metres
260
-
128.9
Cost of 150mm dia PVC ASTM pipe (sch-80)
60
-
1251.4
Cost of 100 mm dia C.I. end plug
1
-
350
Cost of 100mm dia PVC ASTM Pipe(Sch.80)
200
-
825
Cutting slots in 100mm dia Pipe
25
-
250
Supplying all materials, labour, T&P and packing the bore with washed gravel of river shingles of required size and specification around the well screen and pipe etc all complete as per the direction of the Engineer in charge
1.5
-
1791
Cost and Conveyance of Gravel
1
-
295.1
Supplying all materials, labour, T&P and packing the bore with river sand over the gravel pack etc all complete as per the direction of the Engineer in charge
1.5
-
154.5
Cost and Conveyance of sand
1.5
-
1176.8
Supplying all labour T&P and grouting with cement slurry for sanitary sealingin the bore around the upper most 3 metres of 150mm dia PVC casing pipe etc all complete as per the direction of the Engineer in charge.
1
-
1357.8
Cost of Cement
1
-
548.77
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge By Compressor
1
-
2378.1
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge
1.0 H.P three phase submerssible pump set
1
-
13775.6
DOL Control panel
1
-
3805.5
40mm dia steel short piece
1
-
202
Well cap
1
-
152.3
50mm size CI bracket
1
-
91.3
2.50sqmm flat cable
160
-
128.1
20mm dia rigid UPVC pipes
100
-
6.9
Steel rope with cover
150
-
26.7
32mm dia HDPE pipe
100
-
99.8
Labour charges for lowering including transportation
1
-
2000
Supplying all materials, labour, T&P and constructing Bore well protection chamber of the inside size 650x650x1000hight with cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ash brickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:4) inside and outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.
1
-
13112.5
Supplying all materials,labour,T&P and laying in trenches ( to level or slope ) unplasticized PVC pipe conforming to IS:4985/2000 of the following outside dia for class-3 (0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/ as per manufactures's providing and laying in trench cement concrete(1:4:8) with 40 mm size hard granite metal in the Type-C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer-in-charge. 110mm dia U-PVC pipe (Allround concrete )
20
-
1325.9
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx 760mmx 460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty, all taxes etc. all complete as per approved drawing, P.H specification and direction of Engineer-in-charge Inside size : 760mmx 760mmx 460mm
4
-
10676.5
Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge. In side size 250mmx250mm
4
-
1797.1
Supplying all materials, labour, T&P & constructing Soak Way Pit of the following size with dry brick walling from bottom upto invert of inlet pipe and KB brick work in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size crusher broken hard black granite metal on bed, 12mm thick cement plaster in cement mortar (1:4) inside and outside over masonry brick work, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips fitted with iron lifting handles including earth work in open well excavation in all kinds of soil and refilling of cavity around the pit and painting the iron works, watering, curing,cost of all materials,conveyance of all materials to worksite, payment of royalty, all taxes etc. all complete as per approved drawing, PH specification and direction of the Engineer-in- charge.
1.20m dia x 2.00m deep inside size Soakway Pit
1
-
20724.6
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.
12.82
-
215.9
Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.
5.13
-
231.8
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
1.28
-
6199.5
Supplying all materials, labour, T&P and providing shoring and shuttering for foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per specification and direction of the Engineer in charge
25.96
-
245.6
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge R.C.C floor and roof slabs up to 4.30m height
4.41
-
663.2
RCC beam,Column, girders and bressmer etc
39.48
-
992.9
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
7.79
-
9094.4
Supplying all materials, labour,T&P and providing cement concrete(1:1 ½:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
7.79
-
8431.7
Supplying all materials, labour,T&P and providing 6mm thick cement plasster (1:4) over CC work including watering curring and conveyance of all materials to site.
42.89
-
170.5
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
21.05
-
33.7
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
5
-
285.3
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge.
110mm diameter U-PVC SWR pipes(Ashirbad/supreme) In ground floor
1.8
-
458.8
100mm dia U-PVC Plain shoe bend
1
-
232
100mm dia U-PVC cowl
1
-
58.2
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
3.52
-
119.9
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements