Works Department Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
Refer DocumentsDocument Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_EICCL_71947_1Bid Award Id
ViewTender No
RC(RANDB)RGD-09/2021-22Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
DETAILED TENDER CALL NOTICE
BOQ Items
... More
Cement Concrete of proportion (1:2:4) using12 mm size hard black Crusher broken granite stone metal of approved quality from approved quarry, free from skin, including hosting, lowering and laying compacting concrete in layers not exceeding 15 cm (6") thick to required level ramming watering curing etc. including cost, conveyance, royalty and taxes of all materials with all labour with T&P required for the work etc. complete including centering and shuttering, dewatering if required as per drawing and Technical specification and as directed by the Engineer-in-Charge.
20.54
-
5591.3
... More
Fly ash brick masonry in cement mortar (1:6) in Foundation and plinth using bricks of “23cmx11cmx8cm" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge.
45.72
-
4050.47
... More
RCC work of M-20 grade in the following Structural building works using 20mm to 10mm down graded hard black granite Crusher broken aggregates of approved quality from approved quarry including mixing hoisting lowering laying compacting concrete using concrete mixer, vibrator watering and curing for four weeks centering and shuttering and finishing the exposed surfaces smooth as per relevant clauses of section 1700 of MORT&H specification for Road & Bridge works (4th Revision) including hire and running charges of all machineries including cost, conveyance, royalty and taxes of all materials and labour with T&P required for the work etc. complete as per drawing and Technical Specification and as directed by the Engineer-in- Charge.(Excluding cost of reinforcement & binding wires to be used in the work)
1
-
-
... More
Column Base
96.65
-
4899.61
... More
Plinth Beam / Column
14.9
-
5003.05
... More
Column
6.68
-
11820.55
... More
Lintel over the Wall/opening
9.13
-
8159.87
... More
Chajja over opening (OUT SIDE)
34.59
-
767.44
... More
Beam
20.33
-
11820.55
... More
Stair Case
3.2
-
9842.2
... More
Roof Slab
38.18
-
8811.85
... More
Fin(37.5) for window
17.25
-
1256.39
... More
Inside Chajja ( 75mm thick)
15.54
-
867.99
... More
Supplying fitting and placing uncoated HYSD Steel reinforcement works using HYSD (FE-415) steel of approved manufacturer (SAIL Only) as per section 1600 §ion 1900 of MORT&H specification for Road and Bridge works ( 4th revision) including cost, conveyance and taxes of all materials, binding wires 18 to 20 gauge and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. (weight of reinforcement sall be calculated on the basis of IS 1732. wastage, overlaps, couplings, welded joints, space bars, chairs, stays, hangers and annealed steel wires or other method of binding & placing shall not be considered for payment)
205.17
-
7781.46
... More
Fly ash brick masonry in cement mortar (1:6) in super structure using bricks of “23cmx11cmx8cm" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge.
81.36
-
4088.81
... More
20 mm thick Cement Plaster (1:6) finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
234.04
-
201.38
... More
16 mm thick Cement Plaster (1:6) finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
549.91
-
192.08
... More
12 mm (1/2") thick Cement Plaster (1:6) finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
549.91
-
134.25
... More
6mm thick cement plaster (1:4) over RCC works including deep chipping, finished smooth with proper thickness, watering, curing for required days with cost, conveyance, royality, taxes of all materials and labour with T&P required or the work etc. complete in all respect as per drawing and technical specification and as directed by the Engineer-in-charge.
436.03
-
151.21
... More
Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD.) Casement Door – 60- Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outer frames, 102 mm x 60 mm x 2.25 mm for casement Door Sash Profile and 74 mm x 60 mm x 2.5mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding the door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards.--(D and D4) etc complete as per direction of Engineer-in-Charge. (including Door Frame)
33.61
-
8963
... More
Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) ( FENESTA / NCL VEKA LTD.)three track three pannel sliding window -60 series duly manufactured using UPVC reinforced profiles of 108mm x 45mm x 2.5mm for outer frame and window sash of 39mm x58mm x 2.5m capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges,materials and product conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards. ------ (W) etc complete as per direction of Engineer-in-Charge.(including Window Frame)
13.38
-
5984
... More
Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) ( FENESTA / NCL VEKA LTD.) Ventilator/ Top Hung – 60- Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outer frames, 75 mm x 60 mm x 2.25 mm for casement Window Sash Profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards.------ (V) etc complete as per direction of Engineer-in-Charge.
4.04
-
7115
... More
Supplying, fitting, fixing of all types of MS Grills / Gates / Door made of ISI marked standard MS Angles of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings, including mending to sizes supplying and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
661.87
-
61.66
... More
Finishing surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials labour T & P etc. as per direction of Engineer -In -charge.
1746.86
-
71.75
... More
Distempering Two coats to walls over a coat of primerof approved shade on prepared surface of new works to give a even shade with cost conveyance royalties and taxes of all the materials and all labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
1420.84
-
121.86
... More
Painting Two coat with Weather coat over a coat of primer of approved shed of approved colour over prepared surfaces including scuffolding to outside walls, including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
326.02
-
129.62
... More
Painting two coat of any approved S/E paint over iron over a coat of primer of approved shed of approved colour over prepared surfaces including scuffolding to outside walls, including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
63.07
-
187.67
... More
Supplying, fitting & fixing of Supplying, fitting and fixing Vertified Tile 600mm x 600mm plain (Ivory) of approved make confirming to IS:13755 laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge
227.89
-
891.51
... More
Supplying, fitting & fixing of Vertified Tile 600mm x 600mm plain (Ivory) of approved make confirming to IS:13755 in dadoes, skirting laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge
140.76
-
913.29
... More
Supplying, fitting & fixing of Supplying, fitting and fixing Chequred Tile of approved make confirming to IS:13755 laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge
54
-
473.03
... More
Supplying, fitting & fixing of Supplying, fitting and fixing Kotta Tile of approved make confirming to IS:13755 laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge
19.78
-
947.84
... More
providing fitting and fixing Granite tile above 0.40sqm (20mm thick) for base plate of kitchen on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades of tiles including fixing tiles to proper slope / level mending to sizes including cost, conveyance, taxes and royality of all materials with all labour and T&P required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge.
1.56
-
2031.19
... More
Supplying,fitting and fixing in position well dressed and well seasoned 32 mm thick piasal wood or local teak wood paneled shutters and fixing (wrought and put up) in door windows including cost of iron works and coaltaring two coat wall side faces of chowkhats including costof coaltar cutting grooves and mending size where necessary with cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect in all floors as per the direction of the Engineer-in-Charge.
2.6
-
3609.31
... More
upplying, fitting and fixing in position well dressed and well seasoned sal wood work framed and fixed (wrought and put up) in choukaths for doors, windows and ventilators including cost of iron works and coal traing 2 coats or primer to wall side faces of choukaths including cost of coaltar, cutting grooves and mending sizes where necessary with cost and conveyance royalities and taxes of all materials and labour with T&P required for the work etc complete in all respect in all floors. as per drawing and technical specification and as directed by the Engineer-in-charge.
0.26
-
49444.55
... More
Painting two coat of any approved S/E paint over wood work over a coat of primer of approved shed of approved colour over prepared surfaces including scuffolding to outside walls, including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
12.19
-
190.81
... More
Supplying fitting and fixing of Stainless Steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx 2mm @ 0.90mtr C/C and Stainless square pipe bracing of size 32mmx 32mmx 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing,etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
223.2
-
333.73
... More
Supplying fitting and fixing of Stainless Steel of 304 grade in gate using 50mm dia of 2mm thick circular pipe with with rectangular section etc. as per approved design and specification, buffing, polishing,etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
262.5
-
413
... More
providing fitting and fixing of false ceilling with Aluminium anodised T- section No.3215 with 2'-0" centre to centre, L-section No. 1705 upto micron on 4 walls to be fixed by means of steel screw and P.V.C. Plug and the Aluminium grid 2'-0" x 2'-0" with gypsum board suspended from celling etc complete including all cost of labour, T&P , hire charges of drilling machine, labour charges etc. complete. including cost, conveyance, labour, T&P etc. complete for the work as directed by the Engineer-in-charge.
174.03
-
754.63
... More
Providing fitting and fixing of carnish for gypsum board ceilling and approved design by mean of stell screw including cost , conveyance, taxes etc complete labour, T&P etc. complete for the work as directed by the Engineer-in-charge.
123.84
-
166.01
... More
2.5 cm (1") thick grading Concrete in proportion (1:2:2) using 6mm size c.b.h.g chips approved quality from approved quarry including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
251.88
-
282
... More
Providing fitting fixing of PVC rain water spout including cost of all materials and labour T&P etc complete in all repsect as per direction of the Engineer-In charge
10.38
-
120
... More
Supplying, fitting & fixing of Supplying, fitting and fixing KaddapaTile of approved make confirming to IS:13755 laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge
37.56
-
535.72
... More
1st Floor (Head Room)Civil Portion
RCC work of M-20 grade in the following Structural building works using 20mm to 10mm down graded hard black granite Crusher broken aggregates of approved quality from approved quarry including mixing hoisting lowering laying compacting concrete using concrete mixer, vibrator watering and curing for four weeks centering and shuttering and finishing the exposed surfaces smooth as per relevant clauses of section 1700 of MORT&H specification for Road & Bridge works (4th Revision) including hire and running charges of all machineries including cost, conveyance, royalty and taxes of all materials and labour with T&P required for the work etc. complete as per drawing and Technical Specification and as directed by the Engineer-in- Charge.(Excluding cost of reinforcement & binding wires to be used in the work)
1
-
-
... More
Column
2.47
-
13370.18
... More
Lintel over the Wall/opening
0.91
-
8977.46
... More
Beam
1.19
-
13370.18
... More
Roof Slab
2.63
-
9759.78
... More
Supplying fitting and placing uncoated HYSD Steel reinforcement works using HYSD (FE-415) steel of approved manufacturer (SAIL Only) as per section 1600 §ion 1900 of MORT&H specification for Road and Bridge works ( 4th revision) including cost, conveyance and taxes of all materials, binding wires 18 to 20 gauge and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. (weight of reinforcement sall be calculated on the basis of IS 1732. wastage, overlaps, couplings, welded joints, space bars, chairs, stays, hangers and annealed steel wires or other method of binding & placing shall not be considered for payment)
8.55
-
7804.84
... More
Fly ash brick masonry in cement mortar (1:6) in super structure using bricks of “23cmx11cmx8cm" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge.
19.07
-
4350.67
... More
16 mm thick Cement Plaster (1:6) finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
90.68
-
196.91
... More
12 mm (1/2") thick Cement Plaster (1:6) finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
88.08
-
139.67
... More
6mm thick cement plaster (1:4) over RCC works including deep chipping, finished smooth with proper thickness, watering, curing for required days with cost, conveyance, royality, taxes of all materials and labour with T&P required or the work etc. complete in all respect as per drawing and technical specification and as directed by the Engineer-in-charge.
15.35
-
155.02
... More
Supplying, fitting, fixing of all types of MS Grills / Gates / Door made of ISI marked standard MS Angles of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings, including mending to sizes supplying and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
75.6
-
61.66
... More
Finishing surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials labour T & P etc. as per direction of Engineer -In -charge.
107.19
-
73.05
... More
Painting Two coats of Distemper over a coat of primer of approved shade on prepared wall surface of new works to give a even shade with cost conveyance and taxes of all the materials and all labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
107.19
-
124.82
... More
Painting Two coat with Weather coat over a coat of primer of approved shed of approved colour over prepared surfaces including scuffolding to outside walls, including cost and conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
147.81
-
134.65
... More
Painting two coat of any approved Synthetic Enamel paint over iron over a coat of primer of approved shed of approved colour over prepared surfaces including scuffolding to outside walls, including cost and conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
6.3
-
192.54
... More
1st Floor
Providing fitting fixing of PVC rain water spout including cost of all materials and labour T&P etc complete in all repsect as per direction of the Engineer-In charge
2
-
120
... More
GPH Portion
Internal PH
Supplying all materials, labour, T&P and providing and fixing Chlorinated Polyvinyl Chloride (CPVC)Pipes conforming to IS: 15778,,having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings including fixing the pipes with clamps at 1.00m specing.This includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of Engineer in charges.
1
-
-
... More
Ground Floor
20mm dia C - PVC Pipe
40
-
224.1
... More
25mm dia C - PVC Pipe (Water Supply)
50
-
302
... More
32mm dia PVC ASTM Pipe (Sch-80)(Top Floor)
30
-
200
... More
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
1
-
-
... More
15mm dia CP angle stop cock (Jaquar)CON-CHR-053KN
10
-
713.6
... More
15mm dia CP two way bib cock (Jaquar)CON-041KN
2
-
984.3
... More
15mm dia CP Short body bib cock (Jaquar Make)CON-CHR-037KN
4
-
885.9
... More
15mm dia CP long body bib cock (Jaquar)CON-CHR-107KN
2
-
1132
... More
Bathtub Spout with button attachment for hand shower (Cat No.CHR-10463PM)
2
-
1179.4
... More
25mm dia CP Health Faucet (Jaquar Make)ALD - CHR - 573
2
-
1328.8
... More
Concealed Body for Single Lever HighFlow Diverter with Button Assembly,But without Exposed Parts cat no. AL;D -CHR-079n OF Jaquar
2
-
3363
... More
Wall mixture with telephonic shower(Jaquar)Cat No.C217KN)
1
-
3484.5
... More
25mm dia full way valve.(Shakti make)
2
-
925.6
... More
32mm dia full way valve.(Shakti make)
2
-
1354.9
... More
15mm dia CP flange
18
-
40.3
... More
15mm dia CP extension piece
18
-
59.3
... More
125mm CP gratings
12
-
82.3
... More
0.5”x5” CP shower
3
-
910.2
... More
Towel roll holder(ACN-1151N)
3
-
503.3
... More
15mm CP Hand Shower with flexible tube 1.5m long
3
-
1058.1
... More
Towel rack 600mm long with lower hangers(ACN-1181N)
3
-
2144.4
... More
CP towel ring (Jaquar)-ACN-1221BN/1221N
5
-
994.2
... More
Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width Fly ash Bricks in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 2000 liters capacity PVC water storage tank (Roof of Ground Floor)
1
-
33157.4
... More
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.Ground Floor
4
-
44.4
... More
Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge.Ground Floor
4
-
151.8
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.Ground Floor
30
-
157.5
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
1
-
-
... More
110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
40
-
386
... More
75mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
30
-
194.1
... More
110mm U-PVC ' P ' Trap(Ori Plast/Finolex/Supreme Make)
1
-
225
... More
110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
8
-
131.7
... More
110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
8
-
72.3
... More
110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
6
-
38.4
... More
110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
8
-
115.2
... More
110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make)
6
-
137.2
... More
110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
12
-
32.9
... More
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge.
SINGLE PIECE-WATER COLSET P TRAP - LYS-WHT-0204P
2
-
12008.7
... More
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
580mm size Orissa pan (Hindware/Parryware/Neycer make)
1
-
2169.1
... More
Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
1
-
1546.5
... More
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge.
1
-
-
... More
550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with Pedestal
3
-
3897.2
... More
Table top wash basin (Hindware/Cera/Jaquar make)
2
-
4017.5
... More
Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen Sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink
1
-
4887.9
... More
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.
600mmx125mm plate glass shelf with CP/NP guard rails.
3
-
591.4
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
600mmx450mm size B.E mirror (swivelled type)
5
-
626.9
... More
Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
4
-
175.2
... More
Supplying all materials, labour, T&P and cutting of R.C.C roof or cornice for taking H.C.I pipes and making good the damages etc all complete as per P.H.Specification and direction of the Engineer in charge.
3
-
152.1
... More
Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site.
2.19
-
285
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 40mm size crusher broken hard black granite metal including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
2.19
-
4204.6
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
1.46
-
5493.4
... More
Providing & laying granite stone flooring in Floors and landing using 20 mm thick granite stone slab of approved quality, colour and size above 0.4 Sqm as per IS 14223 laid over an under layer of 20 mm thick cement mortar (1:4) (1 cement: 4 coarse sand) confirming to IS-1443 including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.(Note- Sample of granite tiles shall be approved before procurement and use.)
1.2
-
1776.2
... More
Providing and laying of 600mm x 600mm Non-Skid Ceramic floor tiles confirming to IS : 15622 of approved make, quality and colour without any warpage laid over 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.
(Note- Sample of tiles shall be approved before procurement and use.)
(Make:Somany/Jhonson/RAK/Kajaria)
Matt Finish/Non-Skid Ceramic tile 60cmX60cm Size
14.62
-
1155
... More
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
50.96
-
142.2
... More
Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic vetrified glazed wall tiles of premium grade(Kajaria/Jhonson/Orient) having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 600mm X 600mm special plain / printed series to be pre-approved by the Engineer-in-charge )
Glazed tile 60cmX60cm
58.93
-
1090.9
... More
Providing fitting, fixing of Al. door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 6mm plain glass in top portion with 12mm thick pre-laminated board in bottom portion fixed on door frame by means of tapered clip No.4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc.complete.D2=3 X 0.75 X 2.10m
4.72
-
5140.37
... More
Usha Make Water Cooler cum Purifer 80ltr Capacity
1
-
35900
... More
External P.H
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge
110mm dia P.V.C. pipe
30
-
975.3
... More
Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge
4
-
1342.3
... More
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , Fly ash Bricks in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge
Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
2
-
7924.1
... More
Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with Fly ash Bricks having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover )
1
-
15502.5
... More
Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
2
-
18379.5
... More
1 No. 30 Users septic tank of size 3.60m x 1.10m x 2.23m
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge. 1 x 4.70 x 3.30m x 1.04m
16.21
-
201.63
... More
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft. 1 X 4.70m X 3.30m X 0.50m
7.89
-
216.44
... More
Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.
3.02
-
112.02
... More
Supplying all materials, labor T&P providing CC (1:2:4) with 4 cm HG metal including watering curing lead of all materials to site etc. complete.1 X 4.70m X 3.30m X 0.20m
3.03
-
5493.7
... More
Providing C.C. (1:1½:3) with 12mm size hard granite chips of RCC work including hoisting and laying and curing with lead of all materials to site. 1 x 5.50 x 1.60 x 0.10=
0.88
-
6076.6
... More
Supplying all materials, T&P and providing MS reinforcement for RCC work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauges.1.013cum x 2,5 x 35.32 =89.44 say Rs-
0.89
-
7951.6
... More
Rigid & smooth centering & sheltering for RCC work including falls work & dismantling than after casting including cost of materials in ground floor.RCC floor, roof slab chhaja up to 4.430 m height
6.24
-
432.6
... More
Supplying all materials labour T&P and providing 1st class KB brick work in CM (1:4) in foundation and plinth including watering and curing and lead of materials to site.
9.38
-
4377.6
... More
Supplying all materials labour T&P and providing 12mm thick C.P (1:4) including watering curing and conveyance of all materials to site.
36.95
-
142.2
... More
Supplying all materials labour T&P and providing cement punning including watering curing and conveyance of all materials to site.
37
-
30.5
... More
Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge. 1 x 4.7 x 3.30 x 0.139 =
2.16
-
285
... More
Rooftop Rain Water Harvesting System Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge
1
-
-
... More
110mm dia U-PVC SWR pipe Type A
40
-
298.1
... More
110mm U-PVC Plain bend
8
-
72.3
... More
110mm U-PVC Plain tee
8
-
115.2
... More
110mm dia GI clamp
40
-
52.5
... More
125mm dia CP grating
4
-
82.3
... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge
110mm dia P.V.C. pipe
30
-
975.3
... More
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , Fly ash Bricks in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge
Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
2
-
7924.1
... More
Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
2
-
18379.5
... More
14,000 ltr capacity R.C.C. Under ground sump of in side size (2.80m x 2.80m x 2.0m)
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.1 X 3.36 X 3.36 X 1.50 =
16.93
-
201.63
... More
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft. 1 X 3.36 X 3.36 X 0.50 =
5.64
-
216.44
... More
Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.
3.08
-
112.02
... More
Supplying all materials labour T&P filling sand in foundation and plinth with well watered and rammed etc. all complate. As per direction of ELC. 1 x 3.36 x 3.36 x0.15 =
1.69
-
285
... More
Rigid & smooth centering & sheltering for RCC work including falls work & dismantling than after casting including cost of materials in ground floor.RCC floor, roof slab chhaja up to 4.430 m height
55.94
-
432.6
... More
Supplying all materials, T&P and providing MS reinforcement for RCC work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauges.
3.52
-
7951.6
... More
Supplying all labor T&P &Providing C.C. (1:2:4) with 12mm size broken hard granite chips including watering curing & lead of all materials to site etc. all complete.
1.2
-
5493.7
... More
Providing C.C. (1:1½:3) with 12mm size hard granite chips of RCC work including hoisting and laying and curing with lead of all materials to site.
5.11
-
6076.6
... More
Supplying all materials labour T&P and providing 12mm thick C.P (1:3) including watering curing and conveyance of all materials to site.
37.58
-
151.6
... More
Supplying all materials labour T&P and providing cement punning including watering curing and conveyance of all materials to site.
30.24
-
30.5
... More
Construction of 1 no production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
Drilling of 200mm dia bore
1
-
-
... More
00 mtr to 30mtr
30
-
755.48
... More
30 mtr to 45mtr
15
-
836.28
... More
Drilling of 150mm dia bore
45 mtr to 145 mtrs
100
-
554.49
... More
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
Lowering of 200mm dia P.V.C casing pipes
1
-
-
... More
00 mtr to 30 mtrs
30
-
138.2
... More
30 mtr to 45mtr
15
-
138.2
... More
Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.
200mm dia PVC (sch-80) pipe
45
-
1633.8
... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
By DTH Rig
1
-
4994.8
... More
Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation:
Rocky terrain with boulder formation for 300m depth
2
-
1122.11
... More
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make)
1
-
-
... More
1 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby)
2
-
16737.2
... More
DOL Control panel
2
-
3805.5
... More
40mm dia steel short piece
1
-
152.3
... More
Well cap
1
-
152.3
... More
50mm size CI bracket
2
-
91.3
... More
2.50sqmm flat cable
180
-
128.1
... More
20mm dia rigid UPVC pipes
100
-
6.9
... More
Steel rope with cover
100
-
26.7
... More
Labour charges for lowering including transportation
2
-
2000
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge
32mm HDPE pipes (Finolex/Supreme make)
85
-
99.8
... More
Electrical Portion Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with S.P 5/6Amp, one way modular switch ISI marked(L&T/crabtree/ Havells/ ROMA/ SIEMENS/ Finolex) and ceiling rose ISI marked mounted on Modular GI box of 18SWG having modular base & cover of suitable size with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard )
1
-
-
... More
Group-A. L.P.-14 F.P.- C.B.-
14
-
551
... More
Group-B. L.P.-25 F.P.-08 C.B.-
33
-
778
... More
Group-C L.P.- 15 F.P.-07 C.B.-1
22
-
1062
... More
Wiring for twin control light point and FP with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess PVC conduit with 2 way Modular type switch with ISI marked, phenolic laminated sheet suitable size ISI marked G.I. box(18 SWG) and earthing point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc as required. ( Make of wire -Finolex / L&T / Anchor / Havels /V Guard ) LP-4 FP-04
8
-
642
... More
Recessed wiring for 5/6Amp modular Socket outlet with 2x1.5mm2 FR PVC insualted single core multistand copper conductor of ISI marked in recess 20mm dia Non-metalic PVC flexible conduit with piano type switch,phenolic laminated sheet suitable size ISI marked on modular GI box and earthing point with 1x1.5sqmm FR PVC insulated single core multistand copper conductor for loap earthing etc.as required(make of wire-Finolex/L&T/Anchor/ Havels/V-Guard)
1
-
-
... More
Group-A.
5
-
558
... More
On Existing board.
10
-
215
... More
Recessed submain wiring along with earth wire with the following sizes of PVC insualted single core multistand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non-metalic heavy duty flexible conduit 1.6mm in recess PVC conduit as required(make of wire-Finolex/L&T/ Anchor/ Havels/V.Guard)
1
-
-
... More
a)a)1x1.5mm2(1.19.2.SOR-17) Inverter wiring
136
-
46
... More
a)2x1.5mm2(1.19.2.SOR-17) loop wiring
152
-
56
... More
b)2x2.5mm2+1x1.5mm2(1.8.2.SOR-17)
128
-
141
... More
c)2x4mm2+1x1.5mm2 (1.8.3.SOR-17)
130
-
158
... More
e)4x6mm2+ 2x2.5mm2(1.8.8.SOR-17)
66
-
287
... More
S/F of 20W/18W LED batten light of crompton(slim LINEA /Dazzle ray)/ Havells/ Panasonic or Equivalent make.
17
-
691
... More
S/F.of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of Ceiling rose.
10
-
2.68
... More
S/F of 9W/10W LED lamp of havells/Crompton
10
-
154
... More
Supplying and fixing Modular G.l. box of 18 SWG on surface or in recess with Modular base & cover for module in front including providing and fixing 4 Module LED Footlamp as night lamp(Havells/crabtree/ crompton/philips/) connection, painting etc as required.
3
-
850
... More
S/F of 1x15W 5700K cool daywhite light surface celing LED light made up of pressure die cast housing with secondary optics ,IP66 protection Havells make((ENDURA NEO DL SURFACE/ INTEGRA NEO SURFACE) of Havells/Crompton or Equivalent make make including fixing on ceiling with grip and Connection as per direction of Engineer-in-Charge.(ext)
19
-
1859
... More
S/F of1x15W LED of 3700K Warm white/6000K coolday white recess mounted downlighter made up of pressure die cast Al. heat sink and PC diffuser in white powder coated finish with integrated driver Havells (INTEGRA)/ Crompton (CROM ROUND)/ Havells & Crompton OR Equivalent make including cutting of false ceiling and fixing as per direction of Engineer-in-Charge.
30
-
1534
... More
S/F of B.H fitting energy saving,surface mounted decorative round plastic bulk head 1x10Wt LED luminaires comprising high brightness LED with IP54 protection.Havells Make.(ELIPSE ROUND/ ELIPSE OVAL/Rugby) as per direction of Engineer-in-charge.(terrace-2nos.)
2
-
1545
... More
S/F of 1x60W 5700K LED street light made up of pressure die cast housing with toughned glassindividual high powered LEDs with secondary optics ,IP66 protection Havells make (ENDURA PEARL PLUS )/Crompton NEXUS+ including all accessories,G.I bracket and connection.including GI bracket.
1
-
7054
... More
S/F of S/F of 1x30W 5700K LED street light made up of pressure die cast housing with secondary optics ,IP66 protection Havells make(ENDURA CITYLITE PLATINUM)/ Crompton(ASTRA+) including all accessories,G.I bracket and connection.including GI bracket.
5
-
4328
... More
S/F 2.5 sq.mm 3 Core , round Cu cable for wiring from junction box to light fitting including the labour charges towards connection make-finolex/Polycab/havells (For street light and gate light)
120
-
108
... More
Supplying and fixing of Modular G.l. box of 18 SWG on surface or in recess with suitable size Modular base & cover module in front including providing and fixing of Modular Bulbul Callbell of ROMA or Equivalent make with connection, painting etc as required.
1
-
471
... More
Supplying and fixing Modular G.l. box of 18 SWG on surface or in recess with Modular base & cover for module in front including providing and fixing 6pin 15/16Amp modular socket outlet and SP 15/16Amp oneway modular switch (Power Plug) with indicator connection, painting etc as required.(invrtr-6)
6
-
590
... More
Supplying and fixing suitable size Modular G.l. box for surface or in recess with Modular base & cover in front including providing and fixing of 6pin 15/16Amp modular socket outlet AC Point with 20/25AMP SP MCB of (Hager/L&T/Legrand make) connection, painting etc as required.
4
-
707
... More
Supplying and fixing of Modular G.l. box for suitable module on surface or in recess with Modular base & cover and blanking plate ( if required) in front including providing and fixing of 25AMP DOL starter (ROMA/ Crabtree/Havells make) of modular type switch, connection, painting etc as required as per the direction of Engineer-in-Charge.
4
-
636
... More
S/F.of Computer board consisting of 4Nos 5/6AMP modular socket & modular switch including suitable size of GI modular box and modular base &cover (ROMA/ Crabtree/ Havells/L&T)complete with connection as per the direction of Engineer-in-Charge.
8
-
1485
... More
S/F.of 48"A.C.Ceiling fans complete with ISI marked (Havells (SS390 metallic/Havells SS390 DeCo) /Usha Striker (platinum/galaxy)/ Orient(Jazz/summer pride) or Equivalent make including all accessories & connection as per direction of Engineer-in-charge.
12
-
2977
... More
Supplying and fixing of stepped type modular regulator of ISI marked(ROMA/Crabtree/L&T/ Legrand) on Modular G.l. box of 18 SWG on surface or in recess with suitable size Modular base & cover module in front including providing and fixing connection, painting etc as required.(For light plugs to be used in non residential buildings)
12
-
431
... More
Providing and fixing extra down rod of 60 cm length G.I. pipe 20 mm dia heavy gauge including Cutting & threading of Downrod as per direction of Engineer-in-charge.
12
-
94
... More
S/F of 300mm metal exhaust fan with wall cutting including all accessories of USHA(Aero clean)/Bajaj(Bahar)/Crompton (Drift Air) make with making hole on existing wall & connection as per direction of Engineer-in-charge.
3
-
1875
... More
of S/F of (4+12) way TPN Double door D. Box (Hager/ L&T/ C&S/Legrand ) with 63Amp FP,12x(6-32Amp)SP MCB of Hager/ L&T/Legrand/C&S make including all accessories and connection. as per direction Engineer-in-Charge.
2
-
9212
... More
S/F of 6 sq.mm 2 Core Alluminium, armoured LT power Cable With G.I Stay Wire of XLPE insulated 650/1100 grade(make-Havells/Polycab)(For service wire)
70
-
60
... More
S/F.of Special earthing complete with provision of 600x 600x3mmthick or (2ft x 2ft) copper plate, 38/40mm dia 3mtr long G.I.pipe , 25x3mm thick Cu.flat charcoal and salt, funel,earthpit chamber with masonary work including all accessories and connection as per direction of Engineer-in-charge.
1
-
12325.42
... More
Supply and laying of 25mmx5mm copper strip on surface or in recess for connection etc as required.(Connection to be made from special earth electrode to Main panel )as per direction of Engineer-in-charge.
10
-
491.87
... More
S/F of 1 phase KWh meter of 1-30Amp with LCD display with optical port and box of L&T make.
1
-
2465
... More
Service connection charges for single phase supply to each of qtr
1
-
2000
... More
Supply and installation of Metering Unit panel Board of size 30"x18"x10" with 4P 63Amp 36kA MCCB of L&T/Hager/ Legrand /C&S make -1no. 40Amp DP MCB of (Legrand/ L&T/ Hager)make-1 Nos.,63AMp Kitkat fuse, 63AMp Cu busbar-1set, With channels for fitting ,fixing for RYB indicator within it.
1
-
23286.8
... More
S/F 25W Gate light New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with
symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. of Havells/ crompoton make with suitable size of G.I pipe for Fitting and all accessories & Connection.(RUBY CLEAR/ CORAL OPAL)
4
-
9884
... More
S/F of MS gate light jalli (2ftx2ftx2ft)
4
-
2000
... More
Supply of 1.5 Ton 3Star Inverter model split Air conditioners of Voltas/CarrierBlue Star/LG make as per direction of Engineer in charge.
1
-
46380
... More
S/F.of 4KVA Digital wall mounted Voltage Stabilizer input 130V-300V range t (Make-V.guard/ Shakti/ Luminous)
1
-
6319
... More
Installation and fixing of AC machine
1
-
1500
... More
S/F of MS outdoor stand
1
-
1000
... More
Extra 1/2" and 1/4" suction discharge copper pipe to the outdoor unit of 1.5Ton split type AC machine.
5
-
500
... More
S/F of 15L 2KW Electric storage water heater of Havells/ make including fixing on wall and connecting with water inlet & outlet complete with all accessories and connection as per Direction of Engineer-in-Charge.
2
-
9576
... More
Supply and Installation of 2(Two) Nos. Gel type battery of 150AH with 2KVA Inverter of Make Luminous/ Exide/ Sfsonic including all accessories and connection as per direction of Engineer-in-charge.
1
-
57031
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements