Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 1,77,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_EICCL_109872_2Tender No
CCE DKL R and B/15-2024-25Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Providing and laying P.C.C M-20 grade in foundation using 20 mm down graded crusher broken stone aggregates as per approved drawing and technical specifications including cost, conveyance, royalties and taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect but excluding cost of MS rod / Tor steel and binding wire and labour charges for bending binding and tying the grills etc. complete as per direction of the Engineer-in-charge.
20.7
6819
141168.62
... More
Fly Ash brick masonary using Fly Ash brick of size 25cmx12cmx8cm having crushing strength not less than 75kg/cm2 in cement mortar of (1:6) after immersing the bricks for six hours in water before use in Foundation & Plinth including splays cutting circular moulding corbelling champhering and similar such type of work watering and curing including cost conveyance royalty taxes of all materials and cost of all labour with T&P required for the work etc. complete as per direction of the Engineer-in-charge.
64.9
5595
363173.26
... More
Filling foundation and plinth with excavated earth ramming etc complete as per approved drawing and technical specifications in all respect & as per direction of the Engineer-in-Charge.
424.8
150
63932.4
... More
RCC work of M-20 in all floors having a minimum compressive strength ( in work test) 200 kg/cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using 10mm size to 20mm size black hard crusher broken granite stone chips (10mm size 40% & 20mm size 60%) of approved quality & from approved quarry including hoisting lowering laying and compacting concrete with centering & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary and providing required No. of fan hooks as required including cost, conveyance, royalties and taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect but excluding cost of MS rod / Tor steel and binding wire and labour charges for bending binding and tying the grills etc. complete as per direction of the Engineer-in-charge.
-
-
-
... More
Base Footing, Pedestal
109.9
7191
790292
... More
Plinth beam
10.3
8057
82990.09
... More
Columns, Beams
-
-
-
... More
Ground Floor
20.43
18712
382297.19
... More
First Floor
21.99
21143
464941.17
... More
Second Floor
24.66
24135
595171.57
... More
Third Floor
2.8
27718
77611.8
... More
Lintel band
-
-
-
... More
First Floor
9.9
16453
162885.49
... More
Second Floor
3.5
18506
64773.66
... More
Third Floor
0.7
20964
14675.22
... More
Chajja
-
-
-
... More
First Floor
12.4
1443
17896.55
... More
Second Floor
27.7
1651
45747.38
... More
Third Floor
0.8
1901
1520.8
... More
Staircase
-
-
-
... More
Ground Floor
3.6
16209
58354.31
... More
First Floor
3.6
18139
65302.67
... More
Second Floor
3.6
20530
73910.3
... More
Roof slab
-
-
-
... More
Ground Floor
27.1
14369
389419.95
... More
First Floor
27.1
15931
431754.49
... More
Second Floor
27.1
17881
484585.94
... More
Third Floor
3.5
20214
70749.35
... More
Shelves
-
-
-
... More
First Floor
27.6
1249
34488.96
... More
Second Floor
16.2
1546
25051.52
... More
Fins
-
-
-
... More
Ground Floor
10.1
2634
26604.61
... More
First Floor
10.1
3062
30931.76
... More
Second Floor
10.1
3582
36181.33
... More
Labour charges for straightening the coiled or bend up M.S. rod / HYSD bars confirming to Gr. Fe-500, cutting bending binding lapping placing welding etc. (Confirming to ISI specification) and jointing if necessary by lapping and tying the grills and placing in position as required for RCC work as per approved design hoisting lowering and laying in position including cost conveyance & taxes of M.S. rod / tor steel (Primary Producer like- SAIL/RINL/TATA/ JINDALSTEEL/ SHYAM STEEL) make) and binding wire of 18 to 20 gauge (as approved by the deptt.) weight of over lapping, couping, welded joints, spacer bar, chair, stage, hanger and binding wires shall not be considered for payment at all. Standard co-efficient of different size of the steel shall be considered. Welding & lapping should be confirming to relevant clause of IRC 1987 etc. complete as per direction of the Engineer-in-charge.
-
-
-
... More
(a)Ground Floor
193.6
8821
1707805.62
... More
First Floor
81.6
8854
722492.93
... More
Second Floor
78.6
8888
698635.31
... More
Third Floor
9
8924
80321.4
... More
Fly Ash brick masonary using Fly Ash brick of size 25cmx12cmx8cm having crushing strength not less than 75kg/cm2 in cement mortar of (1:6) after immersing the bricks for six hours in water before use in superstructure including splays cutting circular moulding corbelling champhering and similar such type of work watering and curing including cost conveyance royalty taxes of all materials and cost of all labour with T&P required for the work in all floors etc. complete as per direction of the Engineer-in-charge.
-
-
-
... More
Ground Floor
41.08
5634
231454.17
... More
First Floor
66.5
6005
399333.17
... More
Second Floor
47.4
6431
304848.83
... More
Third Floor
20
6921
138435.6
... More
Providing 16mm thick cement plaster in cement mortar (1:6) finished smooth to brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge.
-
-
-
... More
Ground Floor
236.55
275
65219.2
... More
First Floor
410.4
282
115962.62
... More
Second Floor
315.1
289
91262.41
... More
Third Floor
101.5
296
30135.35
... More
Providing 12mm thick cement plaster in cement mortar (1:6) finished smooth to brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge.
-
-
-
... More
Ground Floor
236.55
192
45419.97
... More
First Floor
373.05
199
74479.43
... More
Second Floor
207.7
207
43135.14
... More
Third Floor
97.76
216
21124.96
... More
Providing 6mm thick cement plaster in cement mortar (1:4) finished smooth to brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge.
-
-
-
... More
Ground Floor
458.7
213
97776.49
... More
First Floor
269.3
218
58850.13
... More
Second Floor
303.8
224
68069.43
... More
Third Floor
24.2
229
5560.43
... More
Supplying, fitting and fixing Vitrified Tile in floors, treads, steps and landing slabs of size 600mm x 600mm coloured / printed of approved make confirming to IS:13755 laid on 20mm thick bed of cement mortar (1:4) joined with neat cement slurry mixed with pigments to match the shades of the tiles including, rubbing and polishing the surface with cost, conveyance, royality and all taxes of all materials etc. complete as per direction of the Engineer-in-charge.
-
-
-
... More
First Floor
182.7
1216
222265.51
... More
Second Floor
220.5
1230
271314.23
... More
Supplying, fitting and fixing of vitrified tiles coloured / printed in dados, skirting and risers of steps over 12mm thick cement mortar (1:3) jointed with neat cement slurry mixed with colouring pigments to match the colour and shade including the cost of washing, polishing, cost of materials, cost of all labour, conveyance, taxes, loading & unloading, T&P, watering and curing etc. complete as per the direction of the Engineer-in-Charge.
-
-
-
... More
First Floor
40.7
1356
55205.48
... More
Second Floor
47.2
1377
65008.56
... More
Providing and fixing 32mm thick flush door shutters with frame of approved quality of 30mm thick BWR block pasted with 1mm thick sunmica on bothside of approved design and quality including the cost of hardware fittings like 125mm MS Butt Hinges, Hydraulic door closure, Mortice lock , Handle, 150mm MS tower bolt, door stopper, Cost of labour, coveyance, taxes, loading, unloading, T&P, etc. all complete as per the direction of Engineer-in-Charge.
37.8
10668
403273.46
... More
Supplying fixing and fittings MS window grills, Doors, MS verandha grills and MS grill gate of approved design and drawing made out of MS flat and MS angle at work site with one coat of anticorrosive red oxide zink chrome primer including cutting holes in brick or RCC walls and fixing with CC (1:3:6) including cost conveyance royalty and taxes of all materials all labour T&P required for the work complete (payment will be made on weight basis only)(In all floors) etc. complete as per direction of the Engineer-in-charge.
-
-
-
... More
Grill for window, ventilator & staircase door
2364.6
64
152445.7
... More
Finishing wall surface with cement based wall putty (Water Based) of approved make to wall surface finished smooth & even surface to receive painting in all floors with cost, carriage of all materials and cost of all labour with T&P required for the work etc. complete in all respect as per direction of the Engineer – in – Charge.
-
-
-
... More
First Floor
783.5
87
68485.74
... More
Second Floor
522.7
89
46551.66
... More
Third Floor
101.5
90
9212.14
... More
Painting two coats with water proofing weather coat paint over a coat of primer of approved shade by means of brush to outside surface of walls in all floors with cost, carriage and all taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect as per direction of the Engineer – in – Charge.
-
-
-
... More
Ground Floor
473.1
181
85645.29
... More
First Floor
373.1
186
69743.58
... More
Second Floor
207.7
193
40115.18
... More
Third Floor
97.8
199
19525.77
... More
Painting two coats with Plastic emulsion paint over a coat of primer of approved shade by means of brush to inside surface of walls in all floors with cost, carriage and all taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect as per direction of the Engineer – in – Charge.
-
-
-
... More
First Floor
410.4
192
78997.9
... More
Second Floor
315.1
196
61803.71
... More
Third Floor
101.5
199
20289.85
... More
Painting two coats with synthetic enamel paint of approved shade on iron works including cleaning the surface with sand papering and using paints of approved quality and approved shade including cost conveyance taxes of all materials all labour T&P etc. complete as directed by the Engineer in charge.
-
-
-
... More
Ground Floor
7.2
185
1338.62
... More
First Floor
15.6
189
2963.22
... More
Second Floor
16.4
194
3183.24
... More
Third Floor
2.5
198
495.95
... More
Supplying & Fitting-fixing of Un-plasticised Poly Vinyl Chloride(UPVC) (FENESTA/NCL VEKA LTD.) Three Track -Three Panel sliding window -60-series duly Manufactured using UPVC reinforced profiles of 108mm x 45mm x 2.5mm for outer frames and Window Sash of 39mm x 58mm 2.5mm capable of mounting single glazing system,structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window frame shall be fitted with 6mm thick clear tougherned glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reinforced Large Coupler at the site using anchor fasteners,silicon rubber sealant,easy glazing/ deglazing at site etc.,including cost and conveyance of all materials,accessories,labour charges,materials and product conforming to ASTMD 638-14,EN-477-95 and other applicable codes and standards as per the direction of Engineer-in-Charge.
64.13
5984
383753.92
... More
Supplying,fitting ,fixing of grid mineral fibre ceiling board having size 600 mm x 600 mm x 16mm of approved design and quality complete with frame and all fiotting and fixtures in all respect as per the direction of the Engineer -in-charge.
447.2
1604
717308.8
... More
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90 mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc.as per the direction of Engineer-in-Charge.
382.6
295
113096.56
... More
Providing and laying 25mm thick grading Concrete of proportion (1:2:2 ) using 6mm size crusher broken black hard granite chips from approved quarry, scraping and cleaning the surface, fininishing smooth to proper slope and gradient including cost of all materials, cost of labour, conveyance, taxes, loading, unloading, curing,T&P, etc. all complete as per the direction of the Engineer-in-charge.
-
-
-
... More
Second Floor
217.1
482
104763.78
... More
Third Floor
27.9
533
14896.65
... More
Providing,fitting & fixing of 100mm dia rain water down pipe (Sch-80 PVC Plastic pipes) including the cost of hardware fittings, Cost of labour, coveyance, taxes, loading, unloading, T&P, etc. all complete as per the direction of Engineer-in-Charge.
96
803
77109.11
... More
EI WORKS :-
Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 6Amp, 250V Modular switch ISI marked and ceiling rose ISI marked mounted on metal box having front Modular cover of suitable size, metal box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection.(Make of wire-Anchor/Havells/Finolex ) (Make of switch - Legrand /Roma)
-
-
-
... More
Ground Floor
-
-
-
... More
light point Group-A
2
612
1224
... More
light point Group-B
6
905
5430
... More
light point Group-C
8
1278
10224
... More
First Floor
-
-
-
... More
light point Group-A
10
612
6120
... More
light point Group-B
13
905
11765
... More
light point Group-C
16
1278
20448
... More
second floor
-
-
-
... More
light point Group-A
7
612
4284
... More
light point Group-B
13
905
11765
... More
light point Group-C
15
1278
19170
... More
First Floor
-
-
-
... More
Fan point Group-B
6
905
5430
... More
Group-C
7
1278
8946
... More
second floor
-
-
-
... More
Fan point Group-B
6
905
5430
... More
Group-C
9
1278
11502
... More
First Floor
-
-
-
... More
EX Fan point Group-C
3
1278
3834
... More
Second Floor
-
-
-
... More
EX Fan point Group-C
4
1278
5112
... More
First Floor
-
-
-
... More
Call Bell point Group-C
4
1278
5112
... More
Second Floor
-
-
-
... More
Call Bell point Group-C
1
1278
1278
... More
Point wiring to 5A /6Amp socket outlet with 2 X 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20mm dia non-metallic PVC flexible conduit with piano type switch, Phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 X 1.5sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required (Make of wire -Finolex/ Anchor/ Havells/V-Guard) ( Make of switch - Roma /Legrand )
-
-
-
... More
Separate point-
-
-
-
... More
First Floor
4
547
2188
... More
Second Floor
4
547
2188
... More
S/F of 5 Amp plug with switch on existing board (Modular Type )(Roma/Legrand)
-
-
-
... More
Ground Floor
4
196
784
... More
First Floor
14
196
2744
... More
Second Floor
14
196
2744
... More
Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6Amp & 16Amp socket outlet and 16Amp Modular switches connection (Make- Legrand /Roma)
7
685
4795
... More
Recessed wiring to submain of the following FR PVC insulated single core multistrand copper conductor of ISI Marked confirming to IS-694/1990 in 20mm dia nonmetalic heavy duty flexible conduct 1.6 sqmm thick along with following sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge (Havells/Finolex/Anchor.)
-
-
-
... More
Ground Fioor
-
-
-
... More
2x1.5 sqmm +1x1.5 sqmm 1100 Volts confirming to IS 694/1990
56
157
8792
... More
2x2.5 sqmm +1x1.5 sqmm 1100 Volts confirming to IS 694/1990
32
171
5472
... More
2x6 sq mm+1x2.5 sqmm 1100 Volts confirming to IS 694/1990 in 25 mm dia non-metalic heavy duty flexible conduit
11
219
2409
... More
For Inverter wiring 1 X 1.5sqmm
-
-
-
... More
First Floor
-
-
-
... More
2x1.5 sqmm +1x1.5 sqmm 1100 Volts confirming to IS 694/1990
116
157
18212
... More
2x2.5 sqmm +1x1.5 sqmm 1100 Volts confirming to IS 694/1990
167
171
28557
... More
2x4 sq mm+1x1.5 sqmm 1100 Volts confirming to IS 694/1990
78
188
14664
... More
2x6 sq mm+1x2.5 sqmm 1100 Volts confirming to IS 694/1990 in 25 mm dia non-metalic heavy duty flexible conduit
32
219
7008
... More
4 X10 sq.mm +2 X4 sq.mm -do-25mm dia
31
444
13764
... More
For Inverter wiring 1 X 1.5sqmm
112
46
5205.76
... More
Second Floor
-
-
-
... More
2x1.5 sqmm +1x1.5 sqmm 1100 Volts confirming to IS 694/1990
139
157
21823
... More
2x2.5 sqmm +1x1.5 sqmm 1100 Volts confirming to IS 694/1990
157
171
26847
... More
2x4 sq mm+1x1.5 sqmm 1100 Volts confirming to IS 694/1990
79
188
14852
... More
2x6 sq mm+1x2.5 sqmm 1100 Volts confirming to IS 694/1990 in 25 mm dia non-metalic heavy duty flexible conduit
29
219
6351
... More
4 X10 sq.mm +2 X4 sq.mm -do-25mm dia
43
444
19092
... More
For Inverter wiring 1 X 1.5sqmm
115
46
5345.2
... More
S/F of modular Computer Board consisting 3 nos 5amp and 1 nos 15amp switch and socket ( Make of switch - Roma /Legrand )
-
-
-
... More
First Floor
9
1490
13410
... More
Second Floor
6
1490
8940
... More
S/F of A.C point consisting of 32Amp DP MCB and stator with all connection complete in all respect as per direction of Engineer in charge (Roma/Legrand )
-
-
-
... More
First Floor
5
1250
6250
... More
Second Floor
7
1250
8750
... More
Supply and fixing of superior type Ding Dong call bell / buzzer of ISI marked, on 6" X 4" conforming to IS-2268/1994 and bell push of ISI marked , conforming to IS-1293/ 1988 (make-Cona/ Anchor)
5
120
600
... More
S/F of StandardEarthing with medium class 40mm 3Mtr. Long ISI marked GI Earth pipe including accessories such as funnel GI nut, Bolt, washer , hinged cover plate with looking arrangement, 40mm to 20GI rediusor 5nos 20mm dia holes on GI pipe required charpol salt, Excavation of earth brick work in cement mortar complete in all respect as per specification of SR 2011 and as per Direction of Engineer-in -Chage.
3
2446
7338
... More
proving and fixing of 8 SWG(4mm) dia copper wire on surface or in recess for loop earthing along with existing surface /reccessed conduit /submain wiring /cable as required
35
59
2065
... More
S/F of Copper Plate Earthing (600x600x3mm)with running Copper Flat 25x5mm from coper plate to funel of 40mm dia GI PIPE heavy duty with including all accessories, excavation of earth and providing masonary work with cover plate having loccking arangement and and , charcoal, salt , funnel , tinned brass bolt, check nut and washer complete in all respect as per Govt. schedule of rate 2011 specification as per Direction of Engineering -in-Charge.
1
10588
10588
... More
Extra copper flat 25 x 5mm for running earth
15
515
7725
... More
S/F of Bakelite Angle holder/Batten Holder of ISI marked in place of ceiling Rose complete in all respect as per direction of Engineer in charge (Make : Cona / Anchor / Havells).
-
-
-
... More
First Floor
8
20
160
... More
Second Floor
5
20
100
... More
S/F of 1x18 watt T5 fitting with all acessories in complete (Havells/Philips/Crompton ) in direction of Engineer in charge
-
-
-
... More
First Floor
26
762
19812
... More
Second Floor
20
762
15240
... More
S/F. of 15Wt. LED square Surface mounting down lights of( MAKE- Havels/phillips/Crompton )
59
1534
90506
... More
S/Fof 9W LED Bulb (Havells/Philips/Crompton)
13
136
1768
... More
S/F of Street light of 90 Watt new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover.(Phillips/Havells,Crompton)
6
8156
48936
... More
S/F of 5 star rated A.C Ceiling fan of 48" size. (Make-Usha-Polycab Vital /crompton decora/ Crompton jura.)
-
-
-
... More
First Floor
13
2484
32292
... More
Second Floor
15
2484
37260
... More
S/F of step type Modular Fan Regulator with all connection complete in all respect as per direction of Engineer in charge(Make-Roma/Legrand)
-
-
-
... More
First Floor
13
294
3822
... More
Second Floor
15
294
4410
... More
S/F of 12 inch Heavy duty (Metalic Colour) Exahust Fan with wall cutting, plastring, paintingwith all connection complete in all respect as per direction of Engineer- in- charge. (Usha maxx aor dew white /CG TRANS Air /Havels-venti air DS/Orient -air flow))
-
-
-
... More
First Floor
3
2119
6357
... More
Second Floor
4
2119
8476
... More
Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution 415V on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required ( MAKE-Legrand/Seimens/schneider)
-
-
-
... More
4 way (4+12) double door horizontal type
-
-
-
... More
First Floor
1
2156
2156.35
... More
Second Floor
2
2156
4312.7
... More
Providing and fixing of following capacity TP & N MCB switch unit inside the existing mcb distribution box including drilling holes in the box making connections, etc as required .( MAKE-Legrand/Seimens/schneider/L & T)
-
-
-
... More
63 Amp TP & N MCB
3
2732
8196.39
... More
Providing and fixing of following capacity DP MCB switch unit inside the existing mcb distribution box including drilling holes in the box making connections, etc as required ( MAKE-Legrand/Seimens/schneider/L & T)
-
-
-
... More
63/40Amp DP MCB
5
2266
11330
... More
32A DP MCB
12
870
10440
... More
supply and fixing of 5 to 32 amp rating 240 volt c series miniature circuit breaker suitable for lighting and other loads of the following poles in the existing MCB DB ISI marked complete with comnnections testing and commisioning as required .( MAKE-Legrand/Seimens/schneider/L & T)
-
-
-
... More
Single pole
32
321
10272
... More
supply and fixing of single pole mcb with sheet steel enclosure ,distribution board ,on surface /recess,complete with tinned copper bus bar ,neutral bus bar ,earth bar ,din bar ,dertachable gland plate ,interconnection .phosphate and powder painted including including earthing ect. as required ( but with out MCB/RCCB/ISLOATOR )( MAKE-Legrand/Seimens/schneider/L & T)
-
-
-
... More
12 WAY,DOUBLE DOOR
-
-
-
... More
First Floor
2
1961
3922
... More
8 WAY,DOUBLE DOOR
-
-
-
... More
Ground floor
1
1632
1632
... More
Second Floor
2
1632
3264
... More
Supply of 35 3 ½ Core 1.1KV Grade ISI Marked Alluminium Armoured Cable (Make-Polycab/Gloster/Nicco)
41
301
12341
... More
Cable on steel shadle
41
86
3526
... More
Supply, Installation, Testing and commissioning of 125A pannel(16/18 SWG Single Door panel board of size 24”x18”x10”) with provision of 1No. 125A MCCB , copper busbar 35x5mm 1no, Micro LED phase indicator-3nos , in all respect as per direction of Engineer-in-charge.(Make-Legrand/Seimens/schneider/L & T)for E.I
2
43350
86700
... More
Supply of 250 amp panel board made of 16 SWG C.R sheet with powder coated with provision of following items with fabrication erection testing and commissioning of total enclosed panel board of size ( 2.1x1.3) sq mtr with copper bus bar of 800 copper bus bar ,internal connection and provision for termination of incoming and outgoing cable ,earthing etc. as per direction of engineer- in- charge.
complete with supply and fixing of following switch gear .( MAKE-Legrand/Seimens/schneider/L & T)
INCOMING 1) 250 AMP 4P 36KA MCCB, with thermal magnetic based release &125Amp DG change over
OUTGOING 1) 2 NOS 63 AMP 4P 16 KA mccb & 2 NOS 125A MCCB
1
195229
195229
... More
S/F of 2300VA Invertor Including all accessories & Connection (Make-Microtech/Luminous)
2
12250
24500
... More
S/F of 12Volt 150AH Tubular Battery (Make-Exide/Luminous)
4
20103
80412
... More
Supply of battery trolly
2
1500
3000
... More
Supply of 1.5 Ton split type 3 star inverter type AC machine (Make-Voltage / LG / Carrier / Daikin /Blue star)
6
50578
303468
... More
S/F of stand for outdoor unit of AC machine
6
1000
6000
... More
Installation testing comissioning of AC Machine
6
1500
9000
... More
S/f of 5KVA (90-300V) automatic voltage stabiliser with connection testing complete in all respect as per direction of Engineer in –charge Make-/ V-Guard with minimum 2 years warrenty
6
9300
55800
... More
PH WORKS :-
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipes conforming to pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge
-
-
-
... More
Ground Floor
-
-
-
... More
25mm dia C-PVC pipe (Ashirbad/Supreme/Astrol)
75
404
30337.5
... More
32mm dia PVC pipe (Ashirbad/Supreme/Astrol)
76
322
24479.6
... More
40mm dia PVC pipe (Ashirbad/Supreme/Astrol)
51
514
26244.6
... More
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
... More
15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)
28
861
24116.4
... More
15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make)
7
1255
8785
... More
15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make)
7
1648
11540.9
... More
15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make)
7
1156
8096.2
... More
15mm CP revolving shower with 15mm x 225mm long CP shower arm
7
530
3712.1
... More
15mm dia CP Wall Basin Mixture(Jaquar make)
7
6250
43752.8
... More
25mm dia G.M or Brass F.W valve (Sakti make)
4
1212
4848.8
... More
32mm dia G.M or Brass F.W valve (Sakti make)
4
1774
7098.4
... More
15mm CP Extension piece
63
52
3313.8
... More
125mm CP grating
14
87
1219.4
... More
15mm size C.P. flange
63
77
4876.2
... More
Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge
-
-
-
... More
2000 liters capacity PVC water storage tank roof of 1st floor
4
45600
182400
... More
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.
-
-
-
... More
Ground Floor
14
63
889
... More
Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge
-
-
-
... More
Ground Floor
14
215
3017
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
-
-
-
... More
Ground Floor
65
239
15554.5
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
... More
110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
70
515
36057
... More
75mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
35
337
11802
... More
110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)
7
497
3481.1
... More
110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
8
293
2348.8
... More
110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
8
232
1856
... More
110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
8
407
3259.2
... More
110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
4
58
232.8
... More
110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make)
8
457
3656.8
... More
110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
8
322
2581.6
... More
110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make)
8
551
4409.6
... More
110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make)
8
386
3088
... More
110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
10
160
1601
... More
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
-
-
-
... More
Halfpedestal basin(560x450) (Johnson Make)
7
7717
54019.7
... More
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. One piece commod (Johnson Make)
7
22245
155719.9
... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
25mmx600mm long CP towel rail
7
901
6312.6
... More
Towel ring
7
648
4542.3
... More
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.
-
-
-
... More
600mmx125mm plate glass shelf with CP/NP guard rails.
7
695
4869.2
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
-
-
-
... More
600mm x 450mm size B.E mirror
7
804
5633.6
... More
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
CP Soap holder(Jaquar)CAN-CHR-1141N
14
280
3921.4
... More
Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
12
239
2874
... More
Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
8
149
1193.6
... More
Providing and lying Plain Cement Concrete of proportion (1:4:8) in foundation and floors using 4cm (1 1/2") 0 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading,cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge.
-
-
-
... More
In Ground Floor
1.97
6393
12612.82
... More
In First Floor
2.22
6435
14283.08
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In Ground Floor
68.54
215
14756.66
... More
In First Floor
51.41
219
11294.78
... More
Supplying all materials, labour, T&P and providing and fixing Ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge of size 60cmx60cm special printed series to be pre-approved by the Engineer-in-charge )Kajaria/Somany/Johnson tile 60cmx60cm
-
-
-
... More
In Ground Floor
19.73
1319
26024.26
... More
In First Floor
14.8
1333
19732.75
... More
Supplying all materials, labour, T&P and providing and fixing Glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 60cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge )Kajaria/Somany/Johnson tile
-
-
-
... More
In Ground Floor
76.1
1278
97268.52
... More
In First Floor
51.41
1299
66825.26
... More
Factory made single leaf rigid FRP(alternately called GRP) sanwhch composite door shutter of 32mm thick laminated ith two GRP skins with wood grain finish fabricated using UV-stabilised Isothealica Gelcoat and one layer of 450 gsm E-glass chopped starand mat (CSM) impregnated with orthopthalic palyester resin. The thikness of the skins shall not be less that 1.50mm expanded polyestyrone(EPS) stuctural foam panel of 29 mm thickness and a density of 20Kg/cu.mtr shall be used as core material .Wooden reinforcements made of seasoned sal wood reinforements for fitting the metal fittings such as tower bolts ,aldrops,handles etc. shall be provided .A Strictira; adehsive compatible with(EPS) foam shall be used for bending the core material,the sal wood reiforcements and the skins.The materials and process for manufacturing the door shutters shall conform to RC-TIFAC composites Design centre's standars and specifications and the door shutters tested in conformation to IS:40250-1998.The finish of door shutter will be plain colour white/Lvory/beige/Light grey/Mahogany/Teak wood of any other colour using high quality pigments .Three heavy whight mild steel butt hinges typpe-I(ISI-marked) size 100 mm are to be fitted on one side of shutter.
-
-
-
... More
Ground Floor
10.94
3200
35008
... More
Factory made FRP (alternately called GRP) door frame of sixe75mmX100 mm fabricated using E-Glass chopped strand Mat(CSM) U.V stabilised inopthalic Gelcoat and impregnated with inopthalic resin.The thickness of the GRP sikns shall no be less that 2.00 mm .The door frame consist of foru segments which are provided with plug-in-socket arrangement in-site in the ,ould .The segments are plugged in and are joined together by means of screw . The GRP frame shall be provided with wooedn rainforcement of six locations for high screw holding capacity for fixing metallic hold fast and shall be consolidated by filling with medium destity foam/Plaster of paris with fibre reinforcement,Six numbers of 260mm X 25mm X 5 mm size 'S' shaped M.S flat hold fast shall be provided with the frame .The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design centre's stanards and specifications.The finish of door rrame will be plain colour white/Lvory/Beige/Light grey Golden brown Mahogany/Teak wood sand stone/Champagne /Pastel blue or any other colour using high quality pigments cimplete in all respect as per specification and direction of the Engineer in Charge
-
-
-
... More
Ground Floor
20.4
572
11676.96
... More
First Floor
15.3
572
8757.72
... More
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 80 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 80 liter's along with 1 no. of faucets for cold water and 1 for normal water and 1 no. for Hot Water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge
-
-
-
... More
Cost of Aquaguard Cooler / Hot - Cum Purifier
1
112244
112244
... More
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge
-
-
-
... More
Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
7
11434
80042.9
... More
Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification.
-
-
-
... More
MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover )
5
21797
108986
... More
Ext. S/D Portion
-
-
-
... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge
-
-
-
... More
110mm dia u-pvc pipe alround concrete
45
1448
65173.5
... More
Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
3
26062
78188.4
... More
1 no. 50 Users Septic Tank
-
-
-
... More
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.
37.05
293
10857.13
... More
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft.
12.35
314
3884.94
... More
Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.
30.9
162
5030.52
... More
Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge
3.26
1425
4640.33
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 40mm size crusher broken hard black granite metal including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
2.83
6822
19319.9
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
2.44
8453
20593.21
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.
4.54
9251
42001.36
... More
Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
1.78
9128
16249.44
... More
Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge
-
-
-
... More
RCC floor, roof slab chhaja up to 4.430 m height
13.1
755
9890.5
... More
Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge.
11.49
6311
72501.92
... More
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
83.88
227
19065.92
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge
50.28
41
2091.65
... More
Construction of 1no. production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories
-
-
-
... More
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
-
-
-
... More
Drilling of 200mm dia bore
-
-
-
... More
00 mtr to 30mtr
30
755
22664.4
... More
30 mtr to 48mtr
18
836
15053.04
... More
Drilling of 150mm dia bore
-
-
-
... More
48 mtr to 188.00mtr
140
554
77628.6
... More
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
-
-
-
... More
Lowering of 200mm dia P.V.C casing pipes
-
-
-
... More
00 mtr to 30 mtrs
30
138
4146
... More
30 mtr to 60mtr
18
138
2487.6
... More
Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.
-
-
-
... More
200mm dia PVC (sch-80) pipe
48
1633
78422.4
... More
Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)
1
789
789.8
... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
-
-
-
... More
By DTH Rig
1
4994
4994.8
... More
Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation:
-
-
-
... More
Rocky terrain with boulder formation for 300m depth
2
1122
2244.22
... More
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make)
-
-
-
... More
1 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby)
1
16737
16737.2
... More
DOL Control panel
1
3805
3805.5
... More
40mm dia steel short piece
1
152
152.3
... More
Well cap
1
152
152.3
... More
50mm size CI bracket
1
91
91.3
... More
2.50sqmm flat cable
100
128
12850
... More
Steel rope with cover
80
26
2136
... More
Labour charges for lowering including transportation
1
2000
2000
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge
-
-
-
... More
32mm HDPE pipes (Finolex/Supreme make)
122.2
99
12195.56
... More
Approved for 88 ( Eighty eight ) items only
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%