Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 84,200Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_EICCL_85925_1Bid Award Id
ViewTender No
EE (R and B) Angul-36/ 2022-23Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Fly ash brick masonry in cement mortar (1:6) using 25x12 x8cm size bricks after immersing the bricks for six hours in water before use in Foundation and Plinth including, splays cutting, circular moulding and carbelling, champhering and similar such type of works watering, curing etc. all complete including basic cost, conveyance, royalties of all materials and cost of all labour, and T&P required for the work etc. including labour cess but excluding GST complete (Crushing strength of bricks should not be less than 75kg to 99 kg/cm2 with dimensional tolerance ±2%)
104.19
-
-
... More
RCC M20 having compressive strength of 20mpa, target mean strength of 30mpa, for150mm cubes at 28 days curing as per IS-456-2000 & I.R.C-212000 test conducted in accordance with I.S. 516 using 20mm & down graded size crusher broken hard granite coarse aggregate of approved quality and from approved quarry & other materials as per section 302 of I.R.C.21-2000 & IS-456-2000 of approved quality including centering, shuttering & form works for providing smooth & water tight surface, hoisting, lowering & laying concrete in layers not exceeding 30 cm. compacted thickness, compacting with mechanical vibrators true to lines, grades as per drawing & technical specifications, watering & curing for 28 days including basic cost, conveyance, royalties of all materials with all leads & lift, cost of all labour T&P, including labour cess but excluding GST & equipment required for mixing, transporting & placing in position vibrating, compacting, finishing & curing including all incidental expenses complete in all respect as per direction of the E.I.C. but excluding the cost of M.S. rods or Tor steel and binding wire & labour charges for bending binding & tying the grills Column base (GF)
22.8
-
-
... More
Plinth Beam
15.24
-
-
... More
Columns (GF)
7.93
-
-
... More
FF
4.24
-
-
... More
2F
1.53
-
-
... More
Lintel band (GF)
4.88
-
-
... More
FF
3.44
-
-
... More
2F
0.05
-
-
... More
Chajja Average 65mm thickness (GF)
15.86
-
-
... More
FF
17.17
-
-
... More
2F
2.18
-
-
... More
Shelves (GF)
14.47
-
-
... More
Beam (GF)
10.39
-
-
... More
FF
7.79
-
-
... More
2F
3.45
-
-
... More
Roof Slab (GF)
24.83
-
-
... More
FF
15.47
-
-
... More
2F
6.6
-
-
... More
Stair case (GF)
1.32
-
-
... More
FF
1.32
-
-
... More
Window sill (GF)
0.44
-
-
... More
FF
0.32
-
-
... More
Supplying, cutting, straightening the bent up M.S. Rods or Tor steel, using SAIL / TATA / RINL (grade Fe 5OOD} / JINDAL STEEL / SHYAM STEEL etc. including bending, binding, welding joining if necessary and tying the grills and placing in position as required for R.C.C. works and for providing required no of fan hooks hoisting, lowering, laying including basic cost, conveyance of all M.S. rods or Tor steel and binding wires of 18· to 20 gauge required for the work bending, binding and tying the grills in all floors (Payment will be made on weight of M.S. Rods or Tor steel only and no separate payment will be made towards the weight of binding wires) etc. including labour cess but excluding GST complete as per specification & direction of Engineer-in-Charge (GF)
109.65
-
-
... More
FF
50.82
-
-
... More
2F
18.66
-
-
... More
Fly ash brick masonry in cement mortar (1:6) using 25x12x8cm size bricks after immersing the bricks for six hours in water before use in Superstructure including, splays cutting, circular moulding and carbelling, champhering and similar such type of works watering, curing etc. all complete including basic cost, conveyance, royalties of all materials and cost of all labour, and T&P required for the work etc. including labour cess but excluding GST complete (Crushing strength of bricks should not be less than 75kg to 99 kg/cm2 with dimensional tolerance ±2%) (GF)
103.49
-
-
... More
FF
44.33
-
-
... More
2F
22.7
-
-
... More
Fly ash brick masonry in cement mortar (1:4) using 25x12x8cm size bricks after immersing the bricks for six hours in water before use in Superstructure including, splays cutting, circular moulding and carbelling, champhering and similar such type of works watering, curing etc. all complete including basic cost, conveyance, royalties of all materials and cost of all labour, and T&P required for the work etc. including labour cess but excluding GST complete (Crushing strength of bricks should not be less than 75kg to 99 kg/cm2 with dimensional tolerance ±2%) (GF)
7.09
-
-
... More
FF
5.63
-
-
... More
12mm (½") thick cement plaster (1:6) over brick masonry finished smooth, after racking out the joints including watering and curing etc. with basic cost, conveyance, royalties of all materials and cost of all labour and T&P required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge (GF)
413.16
-
-
... More
FF
177.56
-
-
... More
2F
145.32
-
-
... More
16mm (5/8") thick cement plaster (1:6) over brick masonary finished smooth, after racking out the joints including watering and curing etc. with basic cost, conveyance, royalities of all materials and cost of all labour and T&P required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge (GF)
620.54
-
-
... More
FF
336.03
-
-
... More
2F
49.73
-
-
... More
25mm thick grading Concrete (1:2:2) over roof slab using 12mm & down graded size black hard crusher broken granite chips of approved quality and from approved quarry, including finished smooth with proper slope after chipping, chiselling and cleaning the roof slab including hoisting, watering, curing, basic cost, conveyance, royalities of all materials and cost of all labour, T&P required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge (GF)
67.46
-
-
... More
FF
123.75
-
-
... More
2F
66.1
-
-
... More
20mm (3/4") cement plaster (1:6) finished smooth to stone work after racking out joints including watering, curing, cost, conveyance, royalities of all materials and cost of all labour, T&P required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge
33.79
-
-
... More
6mm thick cement plaster (1:4) to RCC surface finished smooth including close deep chiping and slury treatment including basic cost, conveyance, royality of all materials, labour, T&P required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge
194.37
-
-
... More
FF
139.53
-
-
... More
2F
68.28
-
-
... More
Supplying, fitting and fixing window M.S. grills, grill gates made of M.S. flat/square bar of approved specification design fitted & fixed including cutting the grooves in brick or RCC structure and making good to the damages with C.C. (1:2:4), cost of nails, screws but including basic cost of grills, conveyance, of all materials, labour, T&P. etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge
3111.69
-
-
... More
MS Gate
268.89
-
-
... More
Supplying, fitting and fixing in position well dressed seasoned sal wood work in choukaths (4"x3") in all floors including two coat of coaltaring to wall side faces and fixing the same with required no of W.I. clamps with approved quality and screws including basic cost, conveyance, royalties of all materials and cost of all labour T&P required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge (GF)
1.57
-
-
... More
Supplying, fitting and fixing of 32mm style & 19mm pannel Piasal or local teak wood pannel shutter in doors and windows including bending and cutting sizes of grooves in choukaths and for over lapping portion shutter where necessary, supplying, fitting and fixing cleats sand blocks and fixing oxidised iron or chromium plated, iron aldrops, tower bolts, handles, iron hinges, screws etc. including labour cess but excluding GST complete as per requirement and any additional fittings as directed by the Engineer-in-charge in all floors (GF)
52.61
-
-
... More
Supplying, fitting and fixing up window (sliding type) made of aluminium, section 9778 all window frame section No. 4095, 4096 & 9777, 3994 all shutter frame as panel ftted with rubber beading including lucking arrangement including all fitting, basic cost of materials, labour, T&P. etc. including labour cess but excluding GST complete as per direction of Engineer-in-charge (GF)
187.87
-
-
... More
Painting two coats over a coat of primer with paints of approved shade in all floors to wood and iron works including sand papering, polishing the surface, basic cost, conveyance, of all materials, all labour and T&P. required for the work including labour cess but excluding GST including the cost of paint and primer as per the direction of the Engineer-in-charge (GF)
100.31
-
-
... More
FF
44.93
-
-
... More
2F
4.36
-
-
... More
Painting two coats over a coat of primer with paints of approved shade in all floors to wood including sand papering, polishing the surface, basic cost, conveyance, of all materials, all labour and T&P. required for the work including labour cess but excluding GST including the cost of paint and primer as per the direction of the Engineer-in-charge (GF)
36.89
-
-
... More
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @0.90mtr C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with basic cost, conveyance of all materials, labour, T&P. etc. including labour cess but excluding GST required for the complete in all respect as directed by the Engineer-in-charge in all floors (GF)
342.16
-
-
... More
Supplying, fitting and fixing of Vitrified tile in floor of size 600x600mm plain / ivory of approved make conforming to IS 13755 laid on 20mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including basic cost of all materials, labour, T&P etc. required for the work all complete as per direction of Engineer-in-charge (GF)
129.22
-
-
... More
FF
111.66
-
-
... More
2F
3.25
-
-
... More
Supplying, fitting and fixing of vitrified tile of size 600x600mm in dado & skirting on 12mm thick bed of cement mortar (1:3) jointed with neat cement slurry mixed with pigments using white cement in grating to match the shade of the tile etc. including basic cost, conveyance, royalties of all materials and labour, T&P required for the work etc. including labour cess but excluding GST complete as directed by the Engineer-in-charge
34.27
-
-
... More
FF
20.29
-
-
... More
2F
0.6
-
-
... More
Supplying, fitting and fixing chequor tile of size 300x300mm in floor treads or steps and landing on 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigments using white cement in grating to match the shade of the tile etc. including basic cost, conveyance, royalties of all materials and labour, T&P required for the work etc. including labour cess but excluding GST complete as directed by the Engineer-in-charge
149.23
-
-
... More
Providing and fixing Fixed Ventilators of approved make to be fabricated from roll formed sections made of pre painted steel (base steel as per IS-53 of 0.6 mm thick "D" quality, galvanised as per IS-277 with zinc of 120 Gm/Sqm) with paint specification being with primer of 5-7 microns and finished paint with polyster paint (Black/Pearl white/Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52mm and with all vertical and horizontal mullions are of 46x70mm and fixed beadings are of 18x25mm. Accessories/gaskets are to be used as per the manufacturers supply and specification like handle being made of high grade aluminium powder ccoated and with nylon receiver and gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating. The mullion caps and louvered clips should be dglass filled nylon. The sections are to be cut to length, metre joined with corner bracet and frames are fixed to the concrete / masonary walls by means of self expanding screws and plain glass to be using 5mm plain glass including cost of all materials, labours, cess but excluding GST complete as per direction of Engineer-in-charge (GF)
3.34
-
-
... More
Providing factory made single leaf rigid FRP (alternately called GRP) sandwich composite door shutter of 32mm thick, laminated with two GRP skins with wood grain finish, fabricated using UV-stabilized Isopthalic Gelcoat and one layer of 450 gsm. E-glass Chopped Strand Mat (CSM) impregnated with crthopthalic, pclyester resin. The thickness of the skins shall not be less than 1.5mm, Expanded Polystyrene (EPS structural foam panel of 29mm thickness and a density of 20 kg /Cu. mtr. shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinforcements for fixing the metal fittings such as tower bolts, aldrops, handles etc. shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reinforcements and the skins. The materials and process for manufacturing the door shutters shall confirm to RV-TIFAC composites Design Centre's shandards and specifications and the door shutters tested in confirmation to IS 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy weight mild steel, but hinges type-I (ISI marked) size 100mm are to be fitted on one side of shutter completed in all respect as per direction of the Engineer-in-charge.(GF)
10.74
-
-
... More
Providing factory made FRP (alternately called GRP) Door frame of size 75mm x 100mm, fabricated using E-Glass chopped strand Mat (CSM), U.V. stabolized Isopthalic Gelcoat and impregnated with Isophthalic resin The thickness of the GRP skin shall not be less than 2.0mm. The door frame consist of four segments, lwhich are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six location for high screw holding capacity for fixing metalic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement. Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S. flat hold fast shall be provided with the frame. The material and process for manufacturing the door frame shall confirm to RV-TIFAC composites Design Centre's shandards and specifications. The finish of door frame will be approved plain colour using high quality pigments completed in all respect as per direction of the Engineer-in-charge. (GF)
30.6
-
-
... More
Finishing wall surfaces of wall with acrylic wall putty (water based) of approved make and finished smooth and even surface to receive painting including basic cost, conveyance, of all materials, all labour, T&P. required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge (GF)
735.07
-
-
... More
FF
653.13
-
-
... More
2F
263.33
-
-
... More
Finishing wall surfaces of wall with acrylic wall primer (water bound) one coat over inside surface of wall including basic cost, conveyance, of all materials, all labour, T&P. required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge (GF)
561.28
-
-
... More
FF
475.57
-
-
... More
2F
118.01
-
-
... More
Finishing wall with plastic emulsion paint of approved shade two coats to surface of walls including basic cost of paint, conveyance of all materials, labour, T&P. required for the work etc. including labour cess but excluding GST complete as per direction of Engineer-in-charge (GF)
561.28
-
-
... More
FF
475.57
-
-
... More
2F
118.01
-
-
... More
Finishing wall with weather coat acrylic emultion paint (Delux brand) of approved shade (Antelope Tan-65/185) 2 coats to give an even shade including basic cost of cement paint, all labour, T&P. in all floor & curing etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge (GF)
173.79
-
-
... More
FF
177.56
-
-
... More
2F
145.32
-
-
... More
Supplying and fixing W.I. clamps 25cm to 30cm long (10" to 12") of 38mmx6mm size for door, windows and ventilators in all floors after making holes in bricks or R.C.C. structures and fixing the same in cement concrete of prop. (1:3:6) using 12mm to 20mm size hard broken granite chips including basic cost, conveyance royalities of all materials and labour, T&P required for the work including labour cess but excluding GST complete as per direction of the Engineer-in-charge
136
-
-
... More
Supplying, fitting and fixing of False ceilling with Arm strong Silhouette main runner, cross tee, wall angle with fine fishered RH-99 board on 4 walls to be fixed by means of steel screw, PVC plug & the NRC 0.55 sound attenction 34 db Arm strong grid 2'-0''x2'-0'' suspended from ceilling including cost, conveyance, taxes of all materials, labour, T&P etc. required for the work complete in all respect as per direction of the Engineer-in-charge.
195.27
-
-
... More
Providing anti-termite treatment using approved quality of chemical emulsion, spraying the mixture uniformly by sprayer as pre-constructional anti termite treatment and creating a chemical barrier under and around the column pits, wall trenches, top surface of plinth filling, junction of walls & floors along with external perimeter of the building, expansion joints, surrounding the pipes and conducts etc. complete at the rate as directed by the manufacturer confirming to IS:6313 (Part-II) and as per direction of Engineer-in-charge including basic cost of all materials, labour, sundries, T&P. etc. including labour cess but excluding GST complete (The payments shallbe made on the basis of actual plinth area of the building at Ground Floor & vertical faces will not be measured for payment)
Note - The Contractor shall have to furnish 10 years Guarantee to maintain the anti-termite treated area / structure free from termite
129.22
-
-
... More
Supplying, fitting and fixing of Unplasticised Poly Vinyl chloride (UPVC) (FENSTA) / NCL VEKA Ltd) casement door shutter -60- series duly manufactured using UPVC reinforced profiles of 60mm x 55mm x 2.5mm for outer frame 102mm x 60mmx 2.25mm for casement door sash profile and 74mm x 60mm x 2.5mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0mm prefabricated & welded through fusion welding the door sash shall be fitted with 12mm thick WPC board of Greenply make duly fixed with EPDM weathering seal resistant accesories like clipping locking system made of aluminium 1 no. per set sashes and the system is to be installed at the side using anchor fasteners silicon rubber sealant easy / glazing / deglazing at site etc. including basic cost and conveyance of all materials, accessories, labour charges, materials & product conforming to ASTM D 638-14 EN-477-95 and other applicable codes and standards as per specification and direction the Engineer-in-charge
5.2
-
-
... More
Supplying, fitting and fixing of 4 inch dia 1 mtr. long P.V.C. pipe on roof as rain water pipe of approved quality and approved make including basic cost, conveyance of all materials, cost of all labour, T&P required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge
42.5
-
-
... More
Providing, fitting and fixing of pressed clay tiles (as per approved pattern 20mm nominal thickness of approved size) on roofs joined with cement mortar (1:4) (1 cement : 4 sand) mixed with 2% integral water proofing compound laid over a bed of 20mm thick cement mortar (1:4) to match the shade of the tile etc. including basic cost, conveyance, royalties of all materials and labour, T&P required for the work etc. including labour cess but excluding GST complete as directed by the Engineer-in-charge
33.23
-
-
... More
Distempering two coats with any approved shade over interior surface of walls and ceiling including labour, T&P. and cost of distemper required for the work etc. including labour cess but excluding GST complete as per direction of Engineer-in-charge
64.63
-
-
... More
Finishing wall with water proofing cement paint of approved shade two coats over a coat of cement washing to give on even shade including basic cost of cement paint, all labour, T&P. and curing etc. including labour cess but excluding GST complete as per direction of Engineer-in-charge
428.37
-
-
... More
PCC M-15 in foundation and floor i;e below the base course of terrazo flooring using 20 mm and down graded size black hard granite crusher broken aggregates of approved quality and from approved quarry, including lowering, laying concrete, watering curing etc. complete to required level laid in layers not exceeding 1'-6" thick including basic cost, conveyance, royalities of all materials and cost of all labour, T&P. required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge
25.5
-
-
... More
Providing P.C.C. M-20 in open foundation using 40mm & down graded size black hard crusher broken granite aggregates of approved quality and from approved quarry including lowering, laying, concrete, compacting with mechanical vibrator, watering, curing, centering & shuttering etc. complete to required level laid in layers including basic cost, conveyance, royalities of all materials and cost of all labour required for the work etc. including labour cess but excluding GST complete in all respect as per direction of the Engineer-in-charge
Drain wall
14.4
-
-
... More
RCC M20 in Drain slab (100mm thick) having compressive strength of 20mpa, target mean strength of 30mpa, for150mm cubes at 28 days curing as per IS-456-2000 & I.R.C-212000 test conducted in accordance with I.S. 516 using 20mm & down graded size crusher broken hard granite coarse aggregate of approved quality and from approved quarry & other materials as per section 302 of I.R.C.21-2000 & IS-456-2000 of approved quality including centering, shuttering & form works for providing smooth & water tight surface, hoisting, lowering & laying concrete in layers not exceeding 30 cm. compacted thickness, compacting with mechanical vibrators true to lines, grades as per drawing & technical specifications, watering & curing for 28 days including basic cost, conveyance, royalties of all materials with all leads & lift, cost of all labour T&P, including labour cess but excluding GST & equipment required for mixing, transporting & placing in position vibrating, compacting, finishing & curing including all incidental expenses complete in all respect as per direction of the E.I.C. but including the cost of M.S. rods or Tor steel and binding wire & labour charges for bending binding & tying the grills
72
-
-
... More
PART-B (E.I. WORKS)
Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5Amp, 250V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size, MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection as per direction of Engineer in Charge(Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/HPL) Group-A -L.P- 35
35
-
-
... More
Group-B L.P- 25 FP - 12
37
-
-
... More
Group-C L.P= 27 ExFP-5 CBP-2
34
-
-
... More
Point wiring for 5A /6Amp socket outlet with 2 X 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20mm dia non-metallic PVC flexible conduit with piano type switch, Phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 X 1.5sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required (Make of wire -Finolex/ L&T/ Anchor/ Havells/V-Guard/HPL)
12
-
-
... More
Supply and fixing of 5 Amp plug with switch on existing board (Piano type/cover including connection etc. as required )
20
-
-
... More
Supply and fixing of metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing of 6pin 5/6 & 15/16Amp socket outlet and 15/16Amp piano type switches connection painting etc. as required. (make-Anchor/ Cona/HPL)
9
-
-
... More
Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required.(Make of wire-Finolex/L&T/Anchor/Havells/V-Guard//HPL) 2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia
161
-
-
... More
2 X 2.5 sq.mm +1 X 1.5 sq.mm -do-
244
-
-
... More
2 X 4 sq.mm +1 X 1.5 sq.mm -do-
187
-
-
... More
2 X 6 sq.mm +1 X 2.5 sq.mm in 25mm dia
103
-
-
... More
s/f of 1.5 mm2for invertor wiring
130
-
-
... More
s/f of ac point consisting of 32A industrial socket with 32A starter with all connection compelete s per the direction of engineer in charge
6
-
-
... More
S/F of computer board consisting 3 nos 5amp and 1 nos 15amp switch and socket
8
-
-
... More
Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-HPL/ Havells/ Legrand /L&T/C&S.) 12 way double door
6
-
-
... More
Supply and fixing of 5Amp to 32A rating 240 V/415 V "B" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make-HPL/ Havells/ Legrand /L&T/C&S) Single pole (SP)
30
-
-
... More
32A DP MCB
15
-
-
... More
63 amp DP MCB
6
-
-
... More
Earthing.
Supply and fixing of Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required
2
-
-
... More
Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing as required
30
-
-
... More
S/F of 63A ICDP Main Switch of Havells/Anchor/HPL/L&T make. Including all coneections and accessories as required.
2
-
-
... More
s/f of copper busbar (25x3) as per the direction of Engineer in charge.
2
-
-
... More
Supplying and fixing of Call Bell / Buzzer ISI marked suitable for DC /AC single phase 230 volts complete as required.
2
-
-
... More
S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose .as per direction of Engineer in Charge
5
-
-
... More
s/f of 9/10 watt LED bulb (Make-Havells/Philips/Crompton/Equivalent)as per direction of Engineer in Charge
5
-
-
... More
S/F of 18W/20W Basic all purpose surface and wall mounted LED batten with Aluminum housing & integrated electronic driver. (Make-Havells/Philips/Jaquuar or equivalent.))
24
-
-
... More
S/F. Of 48"AC Ceiling fans including all connections and accessories of Usha Allure Dlx/Havells Pacer/Orient Summer Pride/Equivalent make.
12
-
-
... More
Supply and fixing of Electronic Type fan regulator (Make-Cona/ Anchor/ Usha/Bajaj)
12
-
-
... More
Providing and fixing extra down rod of 100 cm length G.I. pipe 20 mm dia heavy gauge including painting etc as required . ( more than 5 cm lenght shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored.
8
-
-
... More
S/F. Of 400mm Wall fans including all connections and accessories of Usha/Orient/Havells/Equivalent make
6
-
-
... More
S/F of 300mm exhaust fan in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required of Usha/Orient/Havells/Equivalent make
5
-
-
... More
Supply of 6 sq mm 2 core PVC Armoured cables ISI marked.(Make-Havells/Polycab/KEI/Equivalent)
63
-
-
... More
Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size not excedding 25 sq.mm direct in groundwithout protective covering and refilling the trench etc. as required.
57
-
-
... More
s/f of 3 W foot/Step light (make- philips/bajab/surya) as per the direction of Engineer in charge.
3
-
-
... More
S/F of 15Watt Recess mounted round shaped/square shaped LED downlighter with opal diffuser and separate electronic driver.(Make-Havells/Crompton/Philips/Bajaj)
42
-
-
... More
S/F of 18Watt Surface mounted LED downlighter with white powder coated aluminium housing with integrated electronic driver.(Make-Havells/Crompton/Philips/Bajaj/Equivalent)
4
-
-
... More
S/F of 45 W Street light-ENDURA CITYLINER NEO new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover.(Phillips/Havells/bajaj/Equivalent)
6
-
-
... More
S/F of 35 W RUBY model New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source.
2
-
-
... More
s/f of gate light jally with all accessoriesas per the direction of Engineer in Charge
2
-
-
... More
S/F of 2000 W 10 Ltr capacity Electric Water Heaters including all connections and acceessories.
2
-
-
... More
Supply and fixing of 32Amp FT/DP switch (Make-Cona/Anchor)
2
-
-
... More
PART-C (P.H. WORKS)
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.20mm dia C - PVC pipe
25
-
-
... More
F.F
25
-
-
... More
25mm dia C - PVC pipe .G.F
30
-
-
... More
F.F
15
-
-
... More
32mm dia PVC ASTM pipe (sch-80)
40
-
-
... More
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.15mm dia CP angle stop cock (jaquar Make)
15
-
-
... More
15mm dia CP bib cock (jaquar Make)
2
-
-
... More
15mm dia CP long cock (jaquar Make)
1
-
-
... More
15mm dia CP two bib cock (Jaquar Make)
4
-
-
... More
15mm dia cp Health Faucet (jaquar make)
4
-
-
... More
15mm dia C.P. Basin Mixture( 3-in -1)(jaquar make)
2
-
-
... More
15mm dia C.P .Divetor mixer (jaquar mak)
2
-
-
... More
Divetor plate (jaquar mak)
2
-
-
... More
15mm dia C,P. Handa Shower (jaquar mak)
2
-
-
... More
15mm dia C,P Spout(Jaquar make)
2
-
-
... More
15mm dia C.P Wall Mixture(jaquar mak)
2
-
-
... More
25mm dia brass full way valve (Shakti make)
4
-
-
... More
32mm dia BFW Valve (Shakti make)
2
-
-
... More
15mm CP Extension piece
20
-
-
... More
125mm CP grating
6
-
-
... More
15mm size C.P. flange
21
-
-
... More
Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge .2000 liters capacity PVC water storage tank
1
-
-
... More
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.
6
-
-
... More
F,F
6
-
-
... More
Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge.Ground Floor
5
-
-
... More
F,F
5
-
-
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.Ground Floor
20
-
-
... More
F,F
20
-
-
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
40
-
-
... More
110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)
6
-
-
... More
110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
5
-
-
... More
110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
5
-
-
... More
110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
8
-
-
... More
110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
2
-
-
... More
110mm U-PVC HR Bend(Ori Plast/Finolex/Supreme Make)
6
-
-
... More
110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make)
3
-
-
... More
110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
4
-
-
... More
110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
8
-
-
... More
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.580mm size Orissa pan (Hindware/Parryware/Neycer make)
2
-
-
... More
Single Piece E.W.C(Hindware/Parryware/Neycer make)
2
-
-
... More
Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
2
-
-
... More
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge. 550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with Pedestal
1
-
-
... More
Counter Top Basin (560x455) (Perryware/Hindware/nycer Make) white with 15mm C.P. Pillar cock (jaquar/essco)
4
-
-
... More
Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink
1
-
-
... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.25mmx600mm long CP towel rail
4
-
-
... More
Towel ring
5
-
-
... More
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.600mmx125mm plate glass shelf with CP/NP guard rails.
5
-
-
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.600mmx450mm size B.E mirror (swivelled type)
5
-
-
... More
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.CP soap holder
6
-
-
... More
Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.½” x 5” CP Shower (Plaza Deluxe Make)
4
-
-
... More
Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
4
-
-
... More
Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
4
-
-
... More
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , Fly Ash brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge.Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
3
-
-
... More
Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge
4
-
-
... More
Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site.
1.08
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge Ground Floor
0.72
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.F.F
0.72
-
-
... More
Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed series to be pre-approved by the Engineer-in-charge )Ceramic tile 40cmx40cm. Ground Floor
7.2
-
-
... More
F,F
7.2
-
-
... More
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
31.08
-
-
... More
F,F
31.08
-
-
... More
Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge )Ceramic tile 40cmx25cmGround Floor
31.08
-
-
... More
F.F
31.08
-
-
... More
Granite
8.64
-
-
... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge.100mm dia P.V.C. pipe
14
-
-
... More
160mm dia P.V.C. pipe
17
-
-
... More
Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover )
2
-
-
... More
Supplying all materials labour T&P and constructing deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.constructing 1.40m dia x 2.00 m deep soak way pit
1
-
-
... More
1 no. 50 Users septic tank .Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.
29.2
-
-
... More
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft.
19.47
-
-
... More
Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.
48.67
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
2.92
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.
1.02
-
-
... More
Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
1.22
-
-
... More
Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge.RCC floor, roof slab chhaja up to 4.430 m height
6.98
-
-
... More
Supplying all materials.labour.T&P and providing brick work in foundation and plinth with Fly ash bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge.
12.62
-
-
... More
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
34.76
-
-
... More
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:6) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
37.26
-
-
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge
34.76
-
-
... More
Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge.
2.92
-
-
... More
Construction of 1no production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories .Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor Drilling of 200mm dia bore 00mtrto30mtr
30
-
-
... More
Drilling of 150mm dia bore.31 mtr to above
100
-
-
... More
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.Lowering of 200mm dia P.V.C casing pipes.00 mtr to 30 mtrs
30
-
-
... More
Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.200mm dia PVC (sch-80) pipe
30
-
-
... More
Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)
1
-
-
... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge.By DTH Rig
1
-
-
... More
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make)1 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby)
1
-
-
... More
DOL Control panel
1
-
-
... More
40mm dia steel short piece
1
-
-
... More
Well cap
1
-
-
... More
50mm size CI bracket
1
-
-
... More
2.50sqmm flat cable
80
-
-
... More
20mm dia rigid UPVC pipes
40
-
-
... More
Steel rope with cover
40
-
-
... More
Labour charges for lowering including transportation
1
-
-
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge.32mm HDPE pipes (Finolex/Supreme make)
55
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements