Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 80,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_EICCL_102608_3Bid Award Id
ViewTender No
SE CTC (RnB)-II -41 of 2023-24Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Fly Ash Bricks masonry (25cmx12cmx8cm) having crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before use in Foundation & Plinth and for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc. complete along with testing of strength as per relevant I.S.standard andas per specification & direction of Engineer-in-charge.a) (G.F).
90.95
5176
470792.67
... More
Fly Ash Bricks masonry (25cmx12cmx8cm) having crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before use in Superstructure and for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc. complete along with testing of strength as per relevant I.S.standard andas per specification & direction of Engineer-in-charge. a) (G.F).
146.32
5209
762286.23
... More
b) First Floor (Head Room)
19.73
5497
108463.9
... More
RCC work of M-20 Grade with 12mm and down graded size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts including frame works with watering and curing including cost, conveyance, cost of all labour, T&P, cost of all materials etc. complete as per direction and specification of Engineer-in-charge.G.F (a) Plinth Band
21.65
7876
170516.05
... More
b) Column Footing G.F
46.32
6816
315726.85
... More
c) Chajja G.F
15.41
1174
18099.66
... More
d) Lintel Band F.F
4.83
14072
67972.06
... More
e) Column and Beam G.F
22.62
16811
380279.75
... More
f) Roof Slab G.F
23.78
13417
319079.09
... More
g) Staircase G.F
2.66
14742
39216.06
... More
RCC work of M-20 Grade with 20mm and down graded size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts including frame works with watering and curing including cost, conveyance, cost of all labour, T&P, cost of all materials etc. complete as per direction and specification of Engineer-in-charge. F.F (Head Room) a) Chajja
0.72
1327
956.11
... More
b) Lintel Band
0.05
15633
781.67
... More
c) Column and Beams
0.66
18919
12487.13
... More
Cutting, straightening coiled or bent up M.S. Rod or tor steel using SAIL/RINL/TATA/JINDAL STEEL/ SHYAM STEEL including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge. a) G.F
115.19
8886
1023589.86
... More
b) First Floor (Head Room)
1.09
8909
9711.71
... More
Providing 20mm thick cement plaster in cement mortar (1:4) in all floors finished smooth to outside surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. a) G.F
152.74
255
39080.06
... More
Providing 12mm thick cement plaster in cement plaster (1:6) in all floors finished smooth to outside surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. a) G.F
660
164
108273
... More
b) First Floor (Head Room)
82.95
169
14069.15
... More
Providing 16mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to outside surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. a) G.F
949.08
231
219541.19
... More
b) First Floor (Head Room)
102.85
236
24302.43
... More
Providing 6mm thick cement plaster in cement mortar (1:4) over RCC surfaces finished smooth to outside surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. a) G.F
152.25
173
26464.1
... More
Supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe wiht Balustrade of size 32 x 32 x 2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32 x 32 x 2mm in 3 rows in stair case as per approved design and specification buffing polishing etc wiht cost conveyance taxes of all materials labour T&P etc.required for th ecomplete in all respect. G.F
7.85
4403
34568.57
... More
Providing well dressed seasoned sal wood work framed and fixed (W&P) in trushes, purlines, frames of doors, windows, ventilators and beams including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge. G.F
1.12
78901
87974.76
... More
Iron work wrought and put up in trusses and record racks in cluding including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge. F.F (Head Room).
0.53
11987
6353.39
... More
Supplying fitting and fixing WI clamps 33cm to 38cm long for doors, windows including fixing in cement concrete (1:3:6) with 12mm to 20mm size hard granite chips etc complete as per specification & direction of the Engineer-in-charge. G.F
76
19
1513.16
... More
Providing ,Supplying,Fitting & Fixing of 32mm thick piasal Wood or local teakwood panelled shutters moulded pannels complete with all labour iron fitting and wooden hinged cleats, fitted and fixed in position etc. complete including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge. G.F
27.3
5599
152875.09
... More
Providing ,Supplying,Fitting & Fixing of 32mm thick piasal Wood or local teakwood fully Glazed shutters complete with all labour iron fitting and wooden hinged cleats, fitted and fixed in position etc. complete including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge. G.F
6.68
4452
29745.91
... More
Supplying fitting fixing fully glazed aluminium framed openable windows using 15 micron anodized OEL aluminium section 2082 as out section, 9139 as mullion section, 4124 as a shutter section frame with tapered clip of section 4125 almn. Angle, rubber beading friction stay and handle etc. 5mm black etc. complete as per specification & direction of the Engineer-in-charge. G.F
4.7
4648
21847.62
... More
First Floor (Head Room)
0.9
4648
4183.59
... More
Supplying fitting fixing of big six or trafford A.C sheets in roof including fixing of ridges wind ties etc complete including cost, carriage taxes of all materials and all labour T&P required for the work etc complete etc. complete in all respect as per direction of Engineer-in-charge. F.F (Head Room)
15.58
430
6708.59
... More
Supplying, fitting & fixing in all floors of M.S.window grills / spike grills and gates, with top rails, steel windows, critical frames for windows balustrades of stair case and parapet railing made out of M.S.square bar/flat as per approved drawing and design including making holes in walls and RCC structure, wood work etc and making good to the damages to walls with cement concrete(1:2:4) with hard crusher broken granite stone chips of 12mm to 20mm size(20mm size not to exceed 25%) of approved quality with cost of all materials labour, cost of welding all T&P, sundreis etc complete in all respect as per specification and direction of Engineer in charge(screws and other hardward required materials to be used in the work shall be of approved quality and specification and shall have to be supplied by the contractor at his own cost. G.F
2190
60
133305.3
... More
First Floor (Head Room)
92
60
5600.04
... More
Painting two coat with antifungal resistance Weather Seal Coat of approved shade over a coat of primer by means of brush to out side surface ofwalls after cleanding the surface including sand papering, polishing the surface, cost, conveyances, of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge. a) G.F
660
147
97171.8
... More
b) First Floor (Head Room)
82.95
152
12635.77
... More
Distempering two coats with any approved shade over a coat of primer up to any height & in all floors to give an even shade including cost, conveyance, of all materials with labour, T&P required for the work complete in all respect as per direction of the Engineer-in-charge. a) G.F
677.08
136
92611
... More
First Floor (Head Room)
102.85
138
14221.07
... More
Painting two coats over Doors and windows over a coat of primer including cost, conveyances, of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge. a) G.F
86.33
210
18160.38
... More
b) F.F (Head Room)
4.25
215
916.17
... More
Fixing marble tiles ( Vitrified premium grade tiles) in floors treads or steps on 25mm. thick bed of cement mortar (1:1) joined with neat cement slury including rubbing and polishing including cost of tiles etc. Complete as per specification and direction of Engineer in charge. a) G.F
138.04
1053
145382.35
... More
Fixing virtified wall tiles of premium grade coloured / printed 6.6mm to 6.7mm thick in dados skirting and riser of steps on 12mm thick bed of cement mortar (1:3) joined with neat cement slurry including rubbing including cost of tile etc. completed as per specification and direction of Engineer in charge. a) G.F
20
1077
21547.4
... More
Fixing granite tiles in floors treads or steps on 25mm. thick bed of cement mortar (1:1) joined with neat cement slury , mixed with pigment including rubbing and polishing including cost of tiles etc. complete. as per specification and direction of Engineer in charge a) G.F
15.65
1746
27330.69
... More
Fixing Granite wall tiles of premium grade coloured / printed 10mm. thick in dados skirting and riser of steps on 12 mm. thick bed of cement mortar (1:3) joined with neat cement slury including rubbing including cost of tiles etc. complete as per specification and direction of Engineer in charge a) G.F
1.91
1768
3378.16
... More
Fixing Chequered tiles in floors treads or steps on 25 mm. thick bed of cement mortar (1:1) joined with neat cement slury including rubbing including cost of tiles etc. complete as per specification and direction of Engineer in charge a) G.F
24.78
644
15965.75
... More
Cement concrete (1:2:4) in foundation using 12mm size black hard crusher broken granite stone chips of approved quality and from approved quarry including lowering, laying, compacting concrete laid in layers not exceeding 0’-6” thick to required depth & level with watering, curing including cost, conveyances, royalties, of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge. G.F
2.97
7713
22910.22
... More
Construction of embankment with approved materials obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement etc. complete as per specification & direction of the Engineer-in-charge. Approach Road and Compound Wall.
1063.13
179
191150.77
... More
Construction of moorum shoulders with approved materials obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement etc. complete as per specification & direction of the Engineer-in-charge. Approach Road and Compound Wall.
60.76
3073
186762.27
... More
Recessed wiring to light point/ fan point/Exhaust fan point/Call bell point with 1.5sqmm FR PVC Insulated single core multistarand copperConductor of ISI marked with 20mm dia non metalic PVC flexible conductwith 6A 250V MODULAR type switch ISI marked and ceiling rose marked mounted on Modular GI Box having front modular base plate of suitable size, with 1.5sqmm FR PVC Single core multistrand copper conductor as earth wire includingall accessories and connection as per direction of Engineer in charge (Make of wire Finolex / Havells / Anchor / Finolex/Polycab) switch /socket/modular GI Board (Make-Legrand( Lyncus)/Schneider ) light point Group-A
15
670
10050
... More
-do- light point Group-B
24
906
21744
... More
-do- light point Group-C
10
1204
12040
... More
-do- Fan point Group-A
3
670
2010
... More
-do- Fan point Group-B
8
906
7248
... More
-do- Fan point Group-C
4
1204
4816
... More
-do- Cell point Group-C
1
1204
1204
... More
Recessed wiring to 6 AMP Modular socket out let with 2x1.5sq mm for FRLS PVC insulated single core multistrand copper conductor of ISI marked in reccess 20mm dia non metalic PVC flexible conduit Modular GI Box and earthing point with 1x1.5sqmm FR PVC insulated single core multistarnd copper conductor for loop earthing etc,as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / Havells / Anchor /Polycab) switch /socket/modular GI Board Existing board (Make-Legrand( Lyncus)/Schneider )
9
334
3006
... More
Recessed wiring to 6 AMP Modular socket out let with 2x1.5sq mm for FRLS PVC insulated single core multistrand copper conductor of ISI marked in reccess 20mm dia non metalic PVC flexible conduit Modular GI Box and earthing point with 1x1.5sqmm FR PVC insulated single core multistarnd copper conductor for loop earthing etc,as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / Havells / Anchor /Polycab) switch /socket/modular GI Board Separate Point (Make-Legrand( Lyncus)/Schneider )
4
595
2380
... More
Supply and fixing of Multipurpose board having prov. Of 2Nos 6Amp plug with 6Amp switch on existing board (Modular) (Make-Legrand( Lyncus)/Schneider )
5
1284
6420
... More
Supply and fixing of 15/16 Amp Modular socket out let and 15/16 Amp Modular switch ISI marked connection painting etc as required complete in all respect as per direction of Engineer in charge (Make-Legrand( Lyncus)/Schneider )
3
1084
3252
... More
Recessed Extra lead Sub-main wiring for light and fan point 2x1.5mm2 FR PVC insulated single core multistrand copper conductor of ISI Marked confirming to IS-694/1990 in 20mm dia nonmetalic heavy duty flexible conduct 1.6 sqmm thick along with 1x1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / Havells / Anchor / Finolex/Polycab) 2x1.5 sqmm +1x1.5 sqmm 1100 Volts confirming to IS 694/1990
57.58
131
7542.98
... More
Recessed wiring to Sub-main in 2x2.5 sqmm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 20mm dia non metalic heavy duty flexible conduct 1.6mm thick along with 1x1.5sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / Havells / Anchor / Finolex/Polycab) 2x2.5 sqmm +1x1.5 sqmm 1100 Volts confirming to IS 694/1990
90
145
13050
... More
Recessed wiring to Sub-main in 2x4 sqmm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 20mm dia non metalic heavy duty flexible conduct 1.6mm thick along with 1x1.5sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / Havells / Anchor / Finolex/Polycab) 2x4 sq mm+1x1.5 sqmm 1100 Volts confirming to IS 694/1990
28
163
4564
... More
Recessed wiring to Main in 2x6 sqmm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 25mm dia non metalic heavy duty flexible conduct 1.6mm thick along with 1x2.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / Havells / Anchor / Finolex/Polycab) 2X6sq mm+ 1x2.5 sqmm 1100 Volts confirming to IS 694/1990
20
194
3880
... More
Recessed wiring to Main in 4x10 sqmm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 25mm dia non metalic heavy duty flexible conduct 1.6mm thick along with 2x4 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / Havells / Anchor / Finolex/Polycab) 4X10sq mm+ 2x4 sqmm 1100 Volts confirming to IS 694/1990
30
418
12540
... More
Supply of 35mmsq. 3.5 Core 1.1KV Grade ISI Marked pvc insulated pvc sheathed XLPE Alluminium Armored power Cable (Make-Polycab /Havells/Finolex)
40
425
17000
... More
Laying of one number of PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of size exceeding 25 sq.mm but not exceeding 400 sq.mm direct in ground in the existing RCC/ HUME/ STONEWARE/ METAL pipe as required.
40
58
2320
... More
S/F of Bakelite Angle holder/Batten Holder of ISI marked in place of ceiling Rose complete in all respect as per direction of Engineer in charge (Make : Cona / Anchor / Havell's)
11
9
99
... More
Supply and fixing of SP 6-32 A rating 240 V "C" series miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider/legrand/siemens/hager)
12
369
4428
... More
Supply and fixing of DP 6-32 A rating 240 /415V "C" series miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider /legrand/siemens/hager)
4
1123
4492
... More
Supply and fixing of FP 63 A rating 240 /415V "C" series miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider /legrand/siemens/hager)
2
3480
6960
... More
S/F of 8 way Double Door MCB Box on existgsurface / wall mounting with all connection complete in all respect as per direction of engineer incharge (Make : Schneider /legrand/siemens)
2
2839
5678
... More
S/F of 4 way TPN Double Door MCB Box on existgsurface / wall mounting with all connection complete in all respect as per direction of engineer incharge (Make : Schneider /legrand/siemens)
2
4978
9956
... More
Supply of 48 inch / 1200mm A.C. Celling Fan High speed metalic colour ISI Marked with all connection complete in all respect as per direction of Engineer in charge Make:(Orient PSPO summer cool/Crompton /Almonard/Khaitan/Havells)
11
2939
32329
... More
S/F of step type electronic Fan Regulator Modular ISI Marked with all connection complete in all respect as per direction of Engineer in charge(Make-Legrand( Lyncus)/Schneider )
11
696
7656
... More
S/F of 12 inch Heavy duty (Metalic Colour) Exahust Fan with wall cutting, S/F of proper size of hume pipe, concreating, plastaring, painting with all connection testing and commissioning complete in all respect as per direction of Engineer in charge(Make :Almonard / Usha/Havells/Crompton)
4
3134
12536
... More
S/F of A.C. point with Connector(Make:Legrand /Schenider/ Hager /Anchor Dura/ Or Equivalent)
2
1963
3926
... More
S/F of Call Bell /Buzzer ISI marked suitable for AC/Dc single phase 230 V complete .
1
233
233
... More
Supply and fixing copper plate earthing 600 mm X 600 mm X 3.15 mm thick ISI marked including accessories and providing masonary with charcoal and salt with all connection complete in all respect as per direction of engineer incharge
1
18037
18037
... More
Providing and fixing 25mm x 5 mm copper strip on surface or in recess for loop earthing along with existing surface / recessed conduit with all connection complete in all respect as per direction of engineer incharge
8
1423
11384
... More
S/F of Street light 90 W new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover.(Phillips/Havells/Panasonic/Orient)
4
10197
40788
... More
Fixing of Street light with 40 mm G.I bracket WITH 2 Nos GI Clamp & 4 Nos 3'' Anchor Fastner Ifor fixing of Street Light complete in all respect as per direction of Engineer in charge
4
1168
4672
... More
Supply and fixing of Gate LED light for Garden 45 watts in all respect as per direction of Engineer in charge.(Make : Panasonic/ Great white/ Orient/ wipro/ Havells/Phillips)(2Years Warranty)
2
12345
24690
... More
Supply and fixing of 24 watt Recess mounted panel Lights ,making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Panasonic/ Great white/ Orient/ wipro/ Havells/Phillips)(2Years Warranty)
4
2143
8572
... More
Supply and fixing of 18 watt Surface Light ,making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Panasonic/ Great white/ Orient/ wipro/ Havells/Phillips)(2Years Warranty)
8
2961
23688
... More
Supply and fixing of 20watt,CW/WW 6500K,1800 Lumen Aluminium led batten on wall ,making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Pansonic/ Great white/Havells/ wipro)
18
723
13014
... More
S/F of 63 Amp copper busbar panel of size 28*16*7 inch of 63A 4P MCCB with spreader link AS INCOMER 19*6mm copper busbar, 415V 4strip & internal connection & provision for termination of incomming & out going cable , earthing, Indicator etc,
1
15186
15186
... More
Supply and fixing of 4 pole MCCB 63-100A,Ics = 100% Icu, 16 KA breaking capacity, adjustableThermal,fixed magnetic type in existing cubicle panel board including drilling holes in cubcle panel, making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make :legrand/siemens)
1
9532
9532
... More
Supply and fixing of 4 pole 63AMP changeover in existing cubicle panel board including drilling holes in cubcle panel, making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand /siemens (Betaguard) /Hager/L&T)
1
6689
6689
... More
Supply and fixing of Digital Meter Displays Current, line to neutral & line to line Voltages, frequency & Power Factor. (VA & PF - Phase Wise & Average) IEC 62053-21 complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand (DX 3)/siemens (Betaguard) /Hager)
1
3879
3879
... More
Supply and Installation of 2 KVA 24 Volt Inverter LED Display
Turbo mode to increase output voltage
Support single battery
Compatible with Tubular Flat plate & SMF (Make:- Luminous/ Liv fast)
1
20156
20156
... More
Supply and Installation of Battery - Red Charge RC 18000 220 Ah capacity, 12V
Warranty - 36* + 24* Months
Tubular Technology battery – Robust Tubular plates
Low antimony alloy used for low maintenance
Suitable for areas with frequent and long power cuts
Excellent overcharge tolerance (accepts very deep discharge-suitable for areas with long power cut)
Factory charge battery in ready to use condition
High Durability with sealed plastic housing. (Make:- Luminous /Livfast)
2
27057
54114
... More
Supply and Installation OF 1.5 Ton Inverter Air Conditioner (3 Star) make: (Bluestar/Carrier/Voltas/ Hitachi )
1
56850
56850
... More
S/F of copper cooling pipe with insulation packing and flexible copper cable (2.5 Sq MM)
4
1070
4280
... More
S/F of Nylon Netted Drain Pipe with C clamp
4
225
900
... More
S/F of Outdoor Unit Wall mounting Stand with Anchore fastener (Heavy duty for 1.5/2 Ton and above AC Machines)
1
2050
2050
... More
S/F 5 kva voltage stabiliser 130-300V (make : V guard)
1
7067
7067
... More
Solar Street Light:-Supply and fixing of Elegant look 60 W AIO LED Solar Street lights having extruded alluminium housing, 150 Wp or more Mono Crystalline Panel/Laminates fixed on the top of the luminaire housing, maintenance free 12.8 volts 54 Ah or more LiFePO4 battery(BIS certified) , BMS, MPPT charge controller, PIR sensor to provide 2 days (24 hrs ) back up . The luminaire is having IP 65 protection for critical components, IK 07 and having lumen output of 6400 lm (Efficacy of 160 lm/ w ) as LM 79 report of third party NABL lab . The complete Solar lighting system must be warrantied for a period of 5 years is to be provided by the lighting company .as required complete in all respect as per direction of Engineer in charge (Make: Panasonic)
1
60500
60500
... More
Supply of 07 mtr high hot dip galvanised octagonal poles with 130 mm bottom A/F & 70mm top A/F made up of 3mm thk. HT sheet along with base plate of size 200X200X12 mm thk. PCD - 200 mm with M20x6000mm “J” type foundation bolt(Make-Bajaj/LYSAGHT/VALMONT)
1
20900
20900
... More
Foundation, erection and commissioning of street light pole and arm to proper alignment with supply of all materials such as steel reinforcement , metal, chips, cement , sand, cable entry pipe, shuttering for RCC work duly providing foundation bolt and nut with providing not less than 1m× 1m× 1.5m concrete(1:2:4) as per direction of field engineer during execution and approved drawings including labour charges, cost and conveyance of materials etc. complete.
1
2500
2500
... More
Materials with the IS specifications not valid now, we have consider new IS products rates, i.e. IS 15683. Carbon-di- oxide type fire extinguisher of 4.5 kgs. Capacity, CO2 gas filled in brand new seamless cylinder with powder coated finish, made out of Manganese steel, with wheel type valve, discharge nozzle, bend & horn, wal mounting bracket etc. complete, confirming to IS: 15683. (Make : Fireshiled/ Kanex/ Safex/ ceasefire)
1
7700
7700
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge In Ground floor
20mm dia C-PVC Pipes
14.48
247
3580.9
... More
25mm dia C-PVC Pipes
42
335
14095.2
... More
32mm dia C-PVC Pipes
20
504
10092
... More
40mm dia C-PVC Pipes
20
683
13672
... More
50mm dia C-PVC Pipes
6
1052
6313.2
... More
Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.
250mm thick wall In Ground floor
10
50
509
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge.
In Ground floor
16.52
186
3079.33
... More
Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge.
15mm dia CP two way bib cock(CON-CHR-041KN)
1
1255
1255
... More
15 mm dia CP S.B. Bib cock(CON-CHR-037KN)
3
1082
3248.4
... More
15 mm dia CP L.B. Bib cock(CON-CHR-107KN)
1
1451
1451.9
... More
15mm dia CP angle stop cock (Plaza/Amber/Aquatic
9
565
5085
... More
20mm dia CP Con. stop cock (CON-CHR-089KN)
1
1181
1181.2
... More
15mm dia CP flange
15
40
604.5
... More
15mm Cp extention piece
15
59
889.5
... More
25mm brass full way valve
3
929
2788.8
... More
40mm brass full way valve
2
1727
3454.8
... More
125mmdia C.P.grating
6
85
510
... More
Over Head Shower 100mm dia round (OHS-CHR-1999)
1
2116
2116.3
... More
Shower Arm (SHA-CHR-477)
1
639
639.8
... More
15mm dia C.P hand shower
1
937
937.3
... More
600mm X 125mm C.P glass shelf (ACN -CHR-1171N)
3
1255
3765
... More
CP towel rail (25 mm)(ACN-CHR-1111N)
2
1082
2165.6
... More
C.P towel ring(ACN-CHR-1121NMI)
3
1107
3322.2
... More
CP soap holder
3
182
548.4
... More
Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge.
10 litres capacity pvc low level cistern (Slimline-white)
4
1519
6076.8
... More
Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above 1st level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 3.18m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge
2000litre capacity water storage tanks(Sintex make) (In 1st Floor)
2
37191
74382
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge
110mm dia U-PVC SWR pipes(Supreme/Ashirvad)
60.5
462
27951
... More
110mm U-PVC door Tee
5
386
1930
... More
110mm U-PVC plain Tee
2
322
645.4
... More
110mm U-PVC door bend
3
293
880.8
... More
110mm U-PVC plain bend
8
232
1856
... More
110mm dia U-PVC offset without ear
2
407
814.8
... More
110mm dia U-PVC 'P' trap
6
497
2983.8
... More
110mm dia U-PVC cowl
5
58
291
... More
110mm dia U-PVC clamp
18
42
770.4
... More
Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI/PVC SWR pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge
250mm to 375mm thick wall
8
216
1733.6
... More
Supplying all materials, labour, T&P and providing fitting and fixing Dr.Aqua guard Magna UV+HD of size 316x251x462mm with wall hanging facility having storage of 7 ltrs. etc.with internal water supply connection complete as per direction of the Engineer-in-charge.
1
31199
31199
... More
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge
580mm size Orissa pan (Parryware/Cera/ Nycer Make)
2
2376
4752
... More
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge
a.European water closet with ‘S’ trap plain (Parrywere/Hindware/Nicer Make)
1
2656
2656.8
... More
a.Cascade dual flushset (Hindware)No.92099
1
18633
18633.2
... More
Supplying all materials, labour, T&P and fixing bowl pattern urinal of the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge.
Half stall urinal (Jaquar)URS-WHT-13261
2
4035
8071.4
... More
15mm CP spreader
2
286
573.2
... More
32mm CP doom waste
2
128
257
... More
Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps(Plaza make) capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge
550mmx400mm size wash hand basin (Parryware/Cera/ Nycer Make)
3
2276
6830.7
... More
Por. Pedestall
3
1074
3222.6
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge
600mmx450mm size B.E mirror
3
679
2037.3
... More
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor
1.97
5323
10487.49
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
2.95
466
1377.06
... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In Ground floor
1.97
6775
13347.74
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
12mm thick CP (1:4) on bw- In Ground floor
58.59
160
9403.7
... More
Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc. complete as per direction of the Engineer in charge. (Ceramic floor tiles of premium grade Kajaria / Somany make of size 30cm x 30cm to be pre-approved by the Engineer in charge)
In Ground floor
20.45
921
18848.77
... More
Supplying all materials, labour, T&P and providing Granite tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc. complete as per direction of the Engineer in charge.
2.25
2055
4624.2
... More
Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles etc.complete as per direction of the Engineer in charge. (Ceramic wall tiles of premium grade Kajaria / Somany make size 45 x 30 special plain / printed series to be pre-approved by the Engineer in charge)
In Ground floor (inside/outside)
58.59
908
53229.02
... More
Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00 mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.
8.43
5440
45861.73
... More
Supplying all materials, labour, T&P and distempering two coats to walls with distemper of approved shade on new work to give an even shade etc all complete as per specification and direction of the Engineer in charge
23.1
68
1575.42
... More
Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:1.5:3) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, fly ash bricks in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI/P-trap gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge
Inside size 250mmx250mm
5
1616
8082
... More
Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:1.5:3) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
Inside size 760mmx760mmx460mm
4
9756
39027.6
... More
Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
Inside size 910mmx910mmx910mm
1
18997
18997.1
... More
Supplying all materials, labour, T&P and providing 450mm dia x 50mm thick RCPC man hole cover in cement concrete (1:2:4) using 12mm size h.g chips, placing the cover on the man hole/ inspection chamber and finishing smooth all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge
R.C.P.C. Cover(20"/22" round Man hole cover)
6
1093
6558.6
... More
Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast RCC rings joined loose, gravel backing in the rear of well steining, precast RCC cover slab in cement concrete (1:1.5:3) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge RCC rings soakway pit 1.22m dia x 2.10m deep
3
21828
65485.2
... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.
110mm dia u-pvc pipe alround concrete
15
1206
18099
... More
160mm dia u-pvc pipe alround concrete
11.7
1975
23111.01
... More
(Sinking of 150mm size tube well through hand boring( water jet) method)
Suplying all materials, labour, T&P and setting up boring equipments including erection of suitable staging for installation of the required size of tube well, dismantling and removing the same after complection of the work, including transportation of the boring equipments, cleaning and levelling the site, excavation of mud pit, channels etc, levelling of site all complete as per direction of Engineer in charge
1
13235
13235.3
... More
Supplying all labour, T&P and transporting the boring pipes, top casing, grouting pipes, PVC pipes and fittings, PVC well screens, cement, bentinite and gravels etc to the worksite including loading and unloading etc all complete as per direction of the Engineer in charge.
1
1320
1320.6
... More
Supplying all labours, T&P and drilling pilot bore not less than 102mm dia, without casing pipes in all kind of soils and rocks for the following depths excluding supply of necessary boring pipes including supply of necessary cutting equipments, extra sockets ( whenever required) etc and withdrawing the boring pipes, washing and keeping the bore logging if required all complete as per direction of Engineer in charge
Drilling pilot bore from 0 to 360 metres
60
1069
64152
... More
Supplying all labour, T&P and reaming the pilot bore to the following sizes and depth without casing pipes including withdrawing the boring pipes, washing the bore by means of pipe cylinder etc all complete as per direction off Engineer in charge.
Reaming 100mm to 150mm dia from 0-360 mtr
60
184
11082
... More
Reaming 150mm to 200mm dia from 0-360 mtr
60
218
13134
... More
Reaming 200mm to 300mm dia from 0-360 mtr
60
242
14544
... More
Supplyimg all labour, T&P and jointing materials & lowering the 300mm dia top casing pipes into the position and removing the same after all complete as per direction of Engineer in charge
From 0-360 mtr
1
1720
1720.5
... More
Supplying all labour, T&P and jointing materials and lowering the pvc casing pipes, fittings and well screens in position, including fitting and fixing of centraliser, cutter plug and washing the bore all complete as per direction of Engineer in charge
150mm dia PVC casing pipe from 0 to 360 metres
60
132
7968
... More
Cost of 150 mm dia PVC ASTM pipe(sch-80)
60.6
1251
75834.84
... More
Cost of 150mm dia Slott Cutting
6
350
2100
... More
150 mm dia C.I.end/top cutter plug
2
350
700
... More
Cost & Conveyance of bentonite powder
6.5
337
2196.35
... More
Supplying all materials, labour, T&P and packing the bore with washed gravel of river shingles of required size and specification around the well screen and pipe etc all complete as per the direction off the Engineer in charge.
Labour charges
2
1846
3693.6
... More
Cost and Conveyance of gravel
2
636
1273
... More
Supplying all materials, labour, T&P and packing the bore with river sand over the gravel pack all complete as per the direction of the Engineer in charge.
Labour charges
1.8
154
278.1
... More
Cost and Conveyance of sand
1.8
341
614.34
... More
Supplying all labour, T&P including developing the tube well with compressor ( supplied by contractor ) continuiously worked till clear & adequate discharge is obtained from the tube well including supply and use of necessary equipments and labour as per direction of the Engineer in charge.
Labour charges
1
2378
2378.1
... More
Supplying all materials , labour, T&P and providing & fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D & pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction.
40mm dia HDPE pipe
30
147
4416
... More
50mm dia UPVC ASTM-D Pipes
30
571
17151
... More
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submerisble electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trail running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge
2.00H.P single phase submersible pump set (KP4-03215 pumpset CP)Kirloskar/Crompton/CRRI make
1
16625
16625.6
... More
DOL Control panel
1
3805
3805.5
... More
40mm dia steel short piece
1
202
202
... More
Well cap
1
152
152.3
... More
50mm size CI bracket
2
91
182.6
... More
2.50 sqmm flat cable
60
128
7686
... More
Steel rope with cover
40
26
1068
... More
20mm dia rigid UPVC pipes
20
6
138
... More
Supplying all materials, labour, T&P and providing & electrification to submerssible pump sets and service connection including fitting fixing of electric board & Switch etc all complete as per direction of the Engineer in charge.
1
1500
1500
... More
Supplying all materials, labour, T & P and constructing Bore well protection chamber of the inside size 650x650x1000 hight with cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ash brickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g. chips, 12mm thick cement plaster (1:4) inside and outside, RCC cover slab in (1:1.5:3) using 12 mm size h.g. chips, earthwork in excavation in all kind of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction pof the engineer in charge.
1
11583
11583.7
... More
Construction of 20 users Brick Septic tank
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.
10.31
223
2306.35
... More
Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.
4.33
240
1039.63
... More
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor
0.55
5323
2927.98
... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12m size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor
1.31
6775
8875.91
... More
Supplying all materials, labour, T&P and providing brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In F&P
4.82
5525
26631.95
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
32.95
160
5288.48
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor
13.22
33
445.51
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge R.C.C floor and roof slabs
3.43
672
2304.96
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor
0.38
9234
3508.92
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor
0.47
7460
3506.53
... More
Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge
2
395
791.8
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
3.45
124
428.84
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements