Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 3,31,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_EICCL_97612_2Bid Award Id
ViewTender No
CCE_R and B_PLB_18 of 2023_24Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Supplying & Filling foundation trenches , plinth & ditches with clean coarse river sand well watered and rammed in layers not exceeding 23 c.m. in depth with all lead and lift including cost, conveyance, loading, unloading, stacking, royalties and all cost & conveyance of water, cost of all Labour,labour ess,T&P required for the work etc. complete in all respect as directed by the Engineer- in -charge.
-
-
-
Ground Floor
590.75
692831
1172.8
Drain
67.14
78741
1172.8
Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size hard crusher broken granite stone aggregate and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including all cost, conveyance, royalties and cost of all labours,labour cess, T&P etc complete as per specification & direction of the Engineer-in-charge.
-
-
-
Ground Floor
148.01
839246
5670.2
Drain
67.14
380697
5670.2
Providing and laying plain cement concrete of proportion (1:2:4) in foundation and floors using 4 cm. size hard crusher broken granite stone aggregate and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including all cost, conveyance, royalties and cost of all labours,labour cess, T&P etc complete as per specification & direction of the Engineer-in-charge.
-
-
-
Ground Floor
12.95
92303
7127.7
First Floor
3.52
26266
7462.2
Drain
156.66
1116625
7127.7
Fly Ash brick masonry in cement mortar (1:6) in Foundation and plinth using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including all cost, conveyance, royalties with all labour,labour cess and T & P required for the work complete in all respect as per specification and direction of tne Engineer-in-Charge.
-
-
-
Ground Floor
180.88
988690
5466
RCC M-20 using 12 mm. to 20 mm. (½” to ¾”) size (20 mm. not to exceed 25%) hard crusher broken granite stone aggregate of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with all cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per the direction of the Engineer-in-charge.
-
-
-
Column Footing
-
-
-
Ground Floor
190.05
1229965
6471.8
Plinth Band
-
-
-
Ground Floor
33.42
243742
7293.3
Column
-
-
-
Ground Floor
42.93
613701
14295.4
First Floor
21.73
348199
16023.9
Second Floor
1.28
23159
18093.5
Roof Beam
-
-
-
Ground Floor
36.74
525213
14295.4
First Floor
24.86
398354
16023.9
Second Floor
0.91
16465
18093.5
Lintel
-
-
-
Ground Floor
12.41
167914
13530.6
First Floor
9.11
137616
15106.1
Second Floor
0.27
4587
16992.1
Roof Slab
-
-
-
Ground Floor
109.53
1411721
12888.9
First Floor
75.34
1080074
14336
Second Floor
2.17
34867
16068
Stair case
-
-
-
Ground Floor
2.46
35041
14244.6
First Floor
2.46
39268
15962.9
Chajja(65mm avg thickness)
-
-
-
Ground Floor
58.85
67230
1142.4
First Floor
37.5
48652
1297.4
Second Floor
1.64
2432
1483.1
Shelve
-
-
-
Ground Floor
132.98
129535
974.1
First Floor
132.98
149801
1126.5
Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / TATA / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including all cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of the Engineer-in-charge.
-
-
-
Ground floor
438.16
3926307
8960.9
First Floor
155.99
1401882
8987
Second floor
5.12
46153
9014.4
Fly Ash brick masonry in cement mortar (1:6) in Super structure using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including all cost, conveyance, royalties with all labour,labour cess and T & P required for the work complete in all respect as per specification and direction of tne Engineer-in-Charge.
-
-
-
Ground Floor
276.9
1524168
5504.4
First Floor
245.3
1422102
5797.4
Second Floor
65.25
400263
6134.3
Fly Ash brick masonry in cement mortar (1:4) in Super structure using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including all cost, conveyance, royalties with all labour,labour cess and T & P required for the work complete in all respect as per specification and direction of tne Engineer-in-Charge.
-
-
-
Ground Floor
46.75
267863
5729.7
First Floor
46.59
280597
6022.7
2.5 cm thick Grading concrete (1:2:2) on roof slab with 6.7mm & down grades size hard granite crusher broken chips on new work including all cost, conveyances of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.
-
-
-
Ground Floor
109.07
36832
337.7
First Floor
492.27
181401
368.5
Second Floor
12.98
5243
404
Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with all cost, conveyance, royalties, with cost of all labour,labour cess, T&P and scaffolding required for the work etc. complete in all respect as per direction of the Engineer-in-charge .
-
-
-
Ground Floor
969.87
223361
230.3
First Floor
479.22
112952
235.7
Second Floor
34.39
8298
241.3
Providing 12mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with all cost, conveyance, royalties, with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect and specification and direction of the Engineer in charge.
-
-
-
Ground Floor
708.26
115163
162.6
First Floor
723.87
122116
168.7
Second Floor
34.39
6018
175
Providing 12mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with all cost, conveyance, royalties, with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect and specification and direction of the Engineer in charge.
-
-
-
Ground Floor
843.4
154595
183.3
First Floor
843.4
159739
189.4
Providing and fixing Dressed seasoned sal wood work in frames at any locations including doors, windows, cupboard, clerestory and other frames fixing in position including cost of hinges, M.S flat (30mm x 6mm) hold fasts lugs or dash fasteners of required dia and length as per drawing/ specifications at all floors and all heights including cost of all materials, labour, labour cess, T&P etc required for the work all complete as per the direction of the Engineer- in- Charge.
-
-
-
Building Proper
1.8
143125
79514.1
Supplying, fitting, fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc complete as per direction of Engineer in charge.
-
-
-
Building Proper
82.04
875252
10668.61
Supplying, fitting & fixing of Kota Tiles of minimum 16mm thick and above 0.10 sqm of approved make in floors over 25mm thick bed of cement mortar 1:1 jointed with cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect.(Data for 10 Sqm )
-
-
-
Ground Floor
623.94
597921
958.3
First Floor
438.12
424538
969
Supplying, fitting & fixing of Kota Tiles of minimum 16mm thick and above 0.10 sqm of approved make in dadoes, skirting and risers of nsteps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge
-
-
-
Ground Floor
120.92
127945
1058.1
First Floor
97.33
104551
1074.2
Supplying, fitting & fixing of Vitrified Industrial tiles of thickness 8mm to 10mm in floors of size 600mm x 600mm of approved make confirming to IS:13755 laid on 25 mm thick cement mortar (1:1) (1 cement : 1 course sand) and filling joints with white cement of approved quality including cost of all materials, labour, labour cess, T&P etc. required for the work all complete as per direction of the Engineer-in-charge
-
-
-
Ground Floor
18.8
19721
1049
Supplying of M.S. Grills/shutter of approved quality and design to windows and openings and staircase railing and parapet railings etc including making holes in walls and RCC structures or wood work etc in proper position making good the damages of walls or RCC or other structures complete including bending or cutting sizes or grooves in chowkhats with all cost and conveyance of all materials labour , labour cess with T&P required for the work and royalities etc.complete (including screws) in all respect in all floors as per the direction of Engineer-in-Charge .
-
-
-
Building Proper
4789.85
275895
57.6
Supplying & fitting fixing of Un- plasticised Poly Vinyl Chloride (UPVC) (FENESTA/NCL VEKA LTD) Three Track -Three Panel sliding Window -60 series dully manufactured using UPVC reinforced profiles of 108mmx45mmx2.5mm for outer frames & Window sash of 39mmx58mmx2.5mm capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefabricated and welded through fusion welding the window sash shall be fixed with 6mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant & the system is to be installed using Reinforced Large Coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing /deglazing at site etc. including cost and conveyance of all materials, accessories,labour charges, materials and product and product conforming to ASTM D 638-14 EN-477-95 and Other applicable codes and standards as per direction of the Engineer-in-charge
-
-
-
Building Proper
179.14
1071973
5984
Supplying, fitting, fixing of openable UPVC doors with door frame of approved make with 6mm glass of approved quality complete with frame, shutters and all fitting and fixtures etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge .
-
-
-
Building Proper
3.83
33252
8682.12
Supplying & fitting fixing of Un- plasticised Poly Vinyl Chloride (UPVC) (FENESTA/NCL VEKA LTD) Ventilator/Top Hung -60 series dully manufactured using UPVC reinforced profiles of 60mmx55mmx2.5mm for outer frames ,75mmx60mmx2.25mm for Casement Window sash profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefabricated and welded through fusion welding the window sash shall be fixed with 6mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant acessories like clipping locking system made of aluminium 1 No. per set of sashes & the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing /deglazing at site etc. including cost and conveyance of all materials, accessories,labour charges, materials and product and product conforming to ASTM D 638-14 EN-477-95 and Other applicable codes and standards etc. completeas per direction of Engineer in charge.
-
-
-
Building Proper
15.15
107792
7115
Finishing surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including sand papering, cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.
-
-
-
Ground floor
2488.18
176411
70.9
First Floor
1796.66
127383
70.9
Second Floor
81.55
5781
70.9
Priming one coat with approved Water Bound Wall cement Primer on Plastered Surface including sand papering, cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.
-
-
-
Ground floor
2488.18
166210
66.8
First Floor
1796.66
122891
68.4
Second Floor
81.55
5716
70.1
Distempering two coats with distemper of approved make & approved shade to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge.
-
-
-
Ground floor
1779.92
130646
73.4
First Floor
1072.79
80566
75.1
Second Floor
47.16
3621
76.8
Wall Painting two coats with any approved colour of weather seal coat painted outside surfaces of wall of approved shade and quality etc including sand papering, polishing the surface, all cost, conveyances of all materials and cost of all labour, labour cess with T&P etc, complete as per specification & direction of the Engineer-in-charge.
-
-
-
Ground floor
708.26
58218
82.2
First Floor
723.87
61601
85.1
Second Floor
34.39
3033
88.2
Painting two coats with approved enamel paints of approved colour, shade over a coat of primer over new/ old new Iron work including all cost of primer and paint, sand papering, polishing the surface, all cost, conveyances of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.
-
-
-
Ground floor
266.94
57071
213.8
First Floor
167.77
36775
219.2
Second Floor
3.24
728
224.8
Supplying, fitting and fixing hand railing of Stainless steel of 304 grade using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with all cost, conveyance, taxes of all materials, cost of all labour, T&P etc. required for the complete in all respect as per direction of the Engineer-in-charge.
-
-
-
Building Proper
258.86
75276
290.8
Providing Fixing & fitting of 110mm dia PVC Rain water pipe for drainage the roof water including all cost, conveyances of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge
-
-
-
Building Proper
150
55902
372.68
Filling the Foundation and Plinth, Sides of Foundation, etc. with excavated materials (excluding rock), in layers not exceeding 0.225 m in depth including cost of watering, ramming, dressing and levelling the top to proper level & gradient, cost of labour, conveyance, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge.
-
-
-
Ground Floor
801.47
93931
117.2
Cleaning and grubbing road land including uprooting vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness as per section 200, clause 201 of the MoRT&H Specifications for Road & Bridge works (5th Revision) including all cost i.e cost of all materials, all labour, all T&P etc complete and as per direction of the Engineer- in- charge.
-
-
-
Building Proper
11077.82
71451
6.45
INTERNAL PH
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor PVC pipes conforming to ASTM-D-1785/89 of the following nominal bore, tube fittings and clamps including making the wall good, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.
-
-
-
20mm dia C-PVC ASTM pipe (sch-80)
-
-
-
Ground Floor
68
18944
278.6
First Floor
58
16675
287.5
25mm dia PVC ASTM pipe (sch-80)
120
45612
380.1
32mm dia PVC ASTM Pipe(Sch 80)
120
46680
389
40mm dia PVC ASTM Pipe(Sch 80)(Rooftop)
80
61826
772.83
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)
38
32729
861.3
15mm dia CP Bib cock (Con-CHR-047KN Jaquar make)
6
6644
1107.4
15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make)
8
10040
1255
15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make)
17
24682
1451.9
20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make)
10
11320
1132
25mm dia brass full way valve (Shakti make)
8
9593
1199.2
32mm dia brass full way valve (Shakti make)
16
28081
1755.1
15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make)
8
13189
1648.7
15mm CP Extension piece
79
4155
52.6
125mm CP grating
20
1582
79.1
15mm size C.P. flange
79
6114
77.4
Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width Fly ash Bricks in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge
-
-
-
2000 liters capacity PVC water storage tank (Roof of F.F)(Sintex-4 Layer)
8
354481
44310.2
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.
-
-
-
Ground Floor
18
932
51.8
First Floor
16
843
52.7
Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge.
-
-
-
Ground Floor
9
1549
172.2
First Floor
8
1384
173
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
-
-
-
Ground Floor
60
12204
203.4
First Floor
50
10440
208.8
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
150
72825
485.5
75mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
80
25472
318.4
110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)
7
3481
497.3
110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
18
5284
293.6
110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
22
5104
232
110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
12
698
58.2
75mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
10
411
41.1
110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
18
5808
322.7
110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
44
7044
160.1
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
580mm size Orissa pan ((Jaquar/Johnson Make)
6
22375
3729.3
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
European water closet with 'S' trap plain(Jaquar/Johnson Make)
7
21735
3105.1
EWC(Matrix set)No.70002(P-18)
1
66589
66589.4
Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
-
-
-
10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend (Jaquar/Johnson Make)
13
29300
2253.9
Supplying all materials, labour, T&P and fixing Flat back lipped Urinal of size 630mmx180mm with integral longitudinal flushing pipe including cutting the door & mending good the damages embedding the plate in 25mm. Cement mortar(1:8) laid over 150mm. Cement concrete(1:5:10) using 40mm hard granite metal including 6mm. Thick white cement finishing at the top of the urinal foot plate etc.all complete as per specification and direction of the Engineer in charge.
8
46476
5809.5
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
-
-
-
Under Counter basin(560x450)Hindware-No.10095
10
52732
5273.2
Supplying all materials, labour, T&P for fitting & fixing plain Kitchen sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink
2
13594
6797.2
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
25mmx600mm long CP towel rail
22
18986
863
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
-
-
-
Large Size mirror with Frame (00x0.90x0.75)=
6.75
11896
1762.5
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
CP soap holder
24
6067
252.8
Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.
-
-
-
15mm CP revolving shower (Jaquar)CON-CHR-209KN
10
15749
1574.9
Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
10
1993
199.3
Supplying all materials, labour, T&P and cutting of R.C.C roof or cornice for taking H.C.I pipes and making good the damages etc all complete as per P.H.Specification and direction of the Engineer in charge.
10
1192
119.2
Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site.
-
-
-
Ground Floor
5.88
2787
474
Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 40mm size crusher broken hard black granite metal including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
-
-
-
Ground Floor
1.5
9037
6025
First Floor
1.27
7973
6278
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
-
-
-
Ground Floor
4.79
35454
7401.7
First Floor
4.98
38525
7736.1
Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size Kajaria/Somany/Johnson tile 60cmx60cm special printed series to be pre-approved by the Engineer-in-charge )
-
-
-
Kajaria/Somany/Johnson tile 60cmx60cm
-
-
-
Ground Floor
51.3
62360
1215.6
First Floor
41.8
51259
1226.3
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
-
-
-
Ground Floor
202.04
36185
179.1
First Floor
140.92
25746
182.7
Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size Kajaria/Somany/Johnson tile 60cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge )
-
-
-
Kajaria/Somany/Johnson tile 60cmx30cm
-
-
-
Ground Floor
200.37
231086
1153.3
First Floor
140.92
164791
1169.4
Granite
-
-
-
Ground Floor
6.96
12350
1774.5
First Floor Basin Stand
1.44
2670
1854.7
for Urinal
4.32
8012
1854.7
Supplying all materials,labour, T & P and providing brick work in super structure with KB bricks having crushing strength not less than 75 kg/cm² with dimensional tolerence ±8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty ,taxes etc all complete as per specification and direction of Engineer in charge. Aquaguard stand
2.67
14418
5400
Factory made single leaf rigid FRP(alternately called GRP) sanwhch composite door shutter of 32mm thick laminated ith two GRP skins with wood grain finish fabricated using UV-stabilised Isothealica Gelcoat and one layer of 450 gsm E-glass chopped starand mat (CSM) impregnated with orthopthalic palyester resin. The thikness of the skins shall not be less that 1.50mm expanded polyestyrone(EPS) stuctural foam panel of 29 mm thickness and a density of 20Kg/cu.mtr shall be used as core material .Wooden reinforcements made of seasoned sal wood reinforements for fitting the metal fittings such as tower bolts ,aldrops,handles etc. shall be provided .A Strictira; adehsive compatible with(EPS) foam shall be used for bending the core material,the sal wood reiforcements and the skins.The materials and process for manufacturing the door shutters shall conform to RC-TIFAC composites Design centre's standars and specifications and the door shutters tested in conformation to IS:40250-1998.The finish of door shutter will be plain colour white/Lvory/beige/Light grey/Mahogany/Teak wood of any other colour using high quality pigments .Three heavy whight mild steel butt hinges typpe-I(ISI-marked) size 100 mm are to be fitted on one side of shutter
33.08
105856
3200
Factory made FRP (alternately called GRP) door frame of sixe75mmX100 mm fabricated using E-Glass chopped strand Mat(CSM) U.V stabilised inopthalic Gelcoat and impregnated with inopthalic resin.The thickness of the GRP sikns shall no be less that 2.00 mm .The door frame consist of foru segments which are provided with plug-in-socket arrangement in-site in the ,ould .The segments are plugged in and are joined together by means of screw . The GRP frame shall be provided with wooedn rainforcement of six locations for high screw holding capacity for fixing metallic hold fast and shall be consolidated by filling with medium destity foam/Plaster of paris with fibre reinforcement,Six numbers of 260mm X 25mm X 5 mm size 'S' shaped M.S flat hold fast shall be provided with the frame .The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design centre's stanards and specifications.The finish of door rrame will be plain colour white/Lvory/Beige/Light grey Golden brown Mahogany/Teak wood sand stone/Champagne /Pastel blue or any other colour using high quality pigments cimplete in all respect as per specification and direction of the Engineer in Charge.
103.95
59500
572.4
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 120 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 120 liter's along with 3 noa of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge
-
-
-
Aqua guard pure Chill 120 PSS UV
5
656330
131266
EXTERNAL PH
Rooftop Rain Water Harvesting System Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge
-
-
-
110mm dia U-PVC SWR pipe Type A
105.7
51317
485.5
110mm U-PVC Plain bend
20
4640
232
110mm dia GI clamp
53
2782
52.5
125mm dia CP grating
13
1028
79.1
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge
-
-
-
110mm dia P.V.C. pipe
50
65610
1312.2
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , fly ash brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge
-
-
-
Inside size 760mmx760mmx460mm with 18” dia RCC MH cover
8
80553
10069.2
Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
4
91881
22970.3
Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge
8
13312
1664
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge
-
-
-
Inside size 760mmx760mmx460mm with 18” dia RCC MH cover
8
80553
10069.2
Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification.
-
-
-
Man hole chamber size 910mmx910mmx910mm (18" RCC Cover )
4
78038
19509.5
Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
2
45940
22970.3
2 nos 50 Users septic tank (Size-5.00m X 2.00m X 2.10m)
-
-
-
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.
74.1
16910
228.21
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial lift.
24.7
6050
244.97
Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge.
6.5
3081
474
Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 40mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
5.66
34101
6025
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
4.86
35972
7401.7
Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.
4.04
32612
8072.4
Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
3.16
27315
8644.1
Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge
-
-
-
RCC floor, roof slab chhaja up to 4.430 m height
27.32
18492
676.9
Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge.
16.88
94676
5608.8
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
102
18268
179.1
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:6) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
62.66
10489
167.4
Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge
102
3468
34
Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.
50.4
6389
126.78
Construction of 2 No production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories
-
-
-
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
-
-
-
Drilling of 200mm dia bore
-
-
-
00 mtr to 30mtr.
60
45328
755.48
31 mtr to 55mtr.
50
41814
836.28
Drilling of 150mm dia bore
-
-
-
56 mtr to 170mtr
228
126423
554.49
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
-
-
-
Lowering of 200mm dia P.V.C casing pipes
-
-
-
00 mtr to 30 mtrs
60
8292
138.2
31 mtr to 55mtr
50
6910
138.2
Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.
-
-
-
200mm dia PVC (sch-80) pipe
111
181351
1633.8
Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)
2
2018
1009
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
-
-
-
By DTH Rig
2
9989
4994.8
Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation:
-
-
-
Rocky terrain with boulder formation for 300m depth
4
4488
1122.11
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make)
-
-
-
1 H.P. Single phase 3 stage Vertical / Horizontal submersible pump set at head range of 20 to 35 mtr with discharge capacity 145 to 110 L.P.M With outlet dia 25mm
3
50211
16737.2
DOL Control panel
3
11416
3805.5
40mm dia steel short piece
2
304
152.3
Well cap
2
304
152.3
50mm size CI bracket
2
182
91.3
2.5 sqmm flat cable
260
33306
128.1
20mm dia rigid UPVC pipes
260
1794
6.9
Steel rope with cover
160
4272
26.7
Labour charges for lowering including transportation
3
6000
2000
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge
-
-
-
32mm HDPE pipes (Finolex/Supreme make)
240
23952
99.8
30,000 ltr capacity R.C.C. Under ground sump of in side size (3.80m x 3.80m x 2.10m-1 No.
-
-
-
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.
37.5
8557
228.21
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial lift.
12.5
3062
244.97
Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge.
3.75
1777
474
Rigid & smooth centering & sheltering for RCC work including falls work & dismantling than after casting including cost of materials in ground floor.
-
-
-
RCC floor, roof slab chhaja up to 4.430 m height
48.88
33086
676.9
Supplying all materials, T&P and providing MS reinforcement for RCC work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauges.
5.06
43739
8644.1
Supplying all labor T&P &Providing C.C. (1:2:4) with 12mm size broken hard granite chips including watering curing & lead of all materials to site etc. all complete.
3.93
29088
7401.7
Providing C.C. (1:1½:3) with 12mm size hard granite chips of RCC work including hoisting and laying and curing with lead of all materials to site.
9.79
79028
8072.4
Supplying all materials labour T&P and providing 12mm thick C.P (1:4) including watering curing and conveyance of all materials to site.
66.36
11885
179.1
Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge
31.92
1085
34
Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.
18.36
2327
126.78
Construction of 1 No. Pump House 2.43m x 2.43m x 2.74m inside size
-
-
-
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.
12.99
2964
228.21
Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.
2.16
273
126.78
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
1.83
13545
7401.7
Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.
1.22
9848
8072.4
Supplying all materials.labour.T&P and providing brick work in foundation and plinth with 23cmx11cmx8cm size KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge.
8.25
46272
5608.8
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:6) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
55.27
9252
167.4
Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
0.93
8039
8644.1
Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge
-
-
-
RCC floor, roof slab chhaja up to 4.430 m height
5.9
3993
676.9
Supplying all materials, labour, T&P & providing 2.5cm thick A.S. flooring with cement concrete (1:2:4) 12mm hard broken granite chips including conveyance of all materials, watering curing payment of royalty taxes etc. all complete as per direction of Engineer-in-charge.
5.9
2039
345.7
Supplying all materials, labour, T&P & providing 2.5cm thick D.P.C. flooring with cement concrete (1:2:4) 12mm hard broken granite chips including conveyance of all materials, watering curing payment of royalty taxes etc. all complete as per direction of Engineer-in-charge.
2.43
815
335.7
Distemper colour two coats with approved good stone lime over the interior surface of the walls and celing inculding all labour charges cost and conveyance of all materials, taxes and cost of indigo glue with T & P etc complete in all respect in frist floor and as per direction of the Engineer -in- charge
54.5
784
14.4
Supplying fitting, fixing in position angle iron window frame made out of 35mm x 35mm x 5mm, M.S. angle with required nos. of hinges and steel shutter made out of 25mm x 25mm x3mm, M.S. angle fitted with 20 gauge G.P. sheet/ steel plate and welded with tower bolt, handle hold fast & M.S. flat of 19mm x 3mm & welded with entire grill on windows and one coat of red oxide primer and fixing with C.C. (1:3:6) using 12mm size HBG CB Chips and making good to the damages and finishing the exposed surface smooth with watering curing etc. as per direction of the Engineer-in-charge.
103
8903
86.44
Internal EI Works Recessed wiring to light points / fan points/ Exhaust fan / call bell point with 1.5mm2 FRLS PVC insulated SC multistrand copper conductor of ISI marked (Finolex/ Polcab/KEI/ Anchor) with 20mm dia non-metalic PVC flexible conduit (Make- AKJ/ KINJAL/ POLYCAB/ ANCHOR) with 5/6Amp., 250V Modular switch ISI marked and ceeling rose of ISI marked (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze) mounted an Modular G.I. box with Modular base and cover of suitable size (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze), with 1.5sq.mm FRLS PVC insulated single core multistrand Cu. condoctor as earth wire including all accessories and connection. As per direction of Engineer in Charge. (Make of wire Finolex / L&T/ Anchor / KEI/ Polycab/ V-Guard)
-
-
-
Gr. Floor Group-A.
35
19717
563.37
Group-B.
92
74401
808.71
Group-C.
58
64824
1117.66
1st Floor Group-A.
30
16901
563.37
Group-B.
84
67931
808.71
Group-C.
45
50294
1117.66
Supply and fixing of 6Amp 3Pin modular socket with 6Amp modular switch on existing board. (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze.)
-
-
-
Gr. Floor (Existing Modular)
36
8196
227.69
1st Floor (Existing Modular)
32
7286
227.69
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze.)
-
-
-
Gr. Floor (Separate Modular)
30
15359
511.99
1st Floor (Separate Modular)
28
14335
511.99
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze.)
-
-
-
Gr. Floor
16
10381
648.84
1st Floor
8
5190
648.84
Supply and fixing of 3 nos. of 3 pin 5/6 amp modular socket and S.P. 5/6 amp one way modular switch, 1 no. of 5 pin 15/16 sockety out let and S.P. 15/16 A one way modular switch on modular G.I. Box with modular base and cover. (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze.)
-
-
-
Gr. Floor
8
14374
1796.77
1st Floor
8
14374
1796.77
Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metalic heavy duty flexible conduit 1.6mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required. (Make of wire Finolex / L&T/ Anchor / KEI/ Polycab/ V-Guard)
-
-
-
Gr. Floor a) 1x1.5mm2 for Inverter wiring.
180
8640
48
b) 2x1.5mm2 + 1x1.5mm2. in 20mm dia
190
25471
134.06
c) 2x2.5mm2 + 1x1.5mm2. in 20mm dia
250
37005
148.02
d) 2x4mm2 + 1x1.5mm2 in 20mm dia
75
12404
165.39
e) 4x6mm2 + 2x2.5mm2 in 32mm dia
90
26441
293.79
1st Floor a) 1x1.5mm2 for Inverter wiring.
175
8400
48
b) 2x1.5mm2 + 1x1.5mm2. in 20mm dia
170
22790
134.06
c) 2x2.5mm2 + 1x1.5mm2. in 20mm dia
250
37005
148.02
d) 2x4mm2 + 1x1.5mm2 in 20mm dia
60
9923
165.39
e) 4x6mm2 + 2x2.5mm2 in 32mm dia
75
22034
293.79
f) 4x10mm2 + 2x4mm2 in 32mm dia
50
21052
421.04
Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required (But with out MCB/ RCCB/ ISOLATOR) (Make- L&T/ Legrand/ Anchor Panasonic)
-
-
-
Gr. Floor a) 8way double door
2
3276
1638.43
b) 4 Way (4+12) Double Door, Horizontal Type)
1
2173
2173.16
1st Floor a) 8way double door
2
3276
1638.43
Supply and fixing of 5amp to 32 amp rating 240V "C" series miniature circuit breaker suitable for lighting and other loads of the following poles in t he existing MCB DB ISI marked complete with connections testing and commissioning etc. as required. (Make- L&T/ Legrand/ C&S/ Schneider/ Hager)
-
-
-
Gr. Floor a) 6Amp rating to 32Amp (SP) MCB
16
3616
226
b) 40Amp 4Pole MCB
2
4424
2212
c) 63Amp 4Pole MCB
1
2212
2212
1st Floor a) 6Amp rating to 32Amp (SP) MCB
8
1808
226
b) 40Amp 4Pole MCB
2
4424
2212
Supplying and fixing of call bell / buzzer ISI marked suitable for DC / AC single phase 230 volts complete as require. (Make- Cona / Anchor)
-
-
-
Gr. Floor
1
261
261.49
S/F of 1200mm High speed Ceiling fan, Heavy Duty, Durable, Copper winding, Aluminium blade (ISI Mark)
Usha Ergo/Usha Striker/ Bajaj Elegance Ivory make Orient Qusar ornamental. Rate Rs.2637.00
Fixing with all materials 320.00 2957.00
-
-
-
Gr. Floor
36
106452
2957
1st Floor
32
94624
2957
S/F. of 5Step electronic Fan regulator (Make Anchor/ Cona/ Havells)
-
-
-
Gr. Floor
35
14537
415.35
1st Floor
27
11214
415.35
S/F. Of 300mm Exhaust fan (Make Usha / Khaitan).
-
-
-
Gr. Floor
11
23474
2134
1st Floor
9
19206
2134
S/F. Of 400mm Wall mounted fan (Make Usha / Bajaj).
4
10036
2509
S/F of 16Wt. 1' x 1' LED Ramp Light fittings (Philips / Panasonic / Havels) make.
2
4534
2267
S/F. of 1x18Wt. LED tube light fiting (Philips / Panasonic / Havels) make.
-
-
-
Gr. Floor
82
45510
555
1st Floor
72
39960
555
S/F of 45Wt. LED Street light fittings complete with G.I. Barcket (Philips / Panasonic / Havels) make.
-
-
-
Gr. Floor
3
13935
4645
2nd. Floor Open Terrace.
2
9290
4645
S/F of 90Wt. LED Street light fittings complete with G.I. Barcket (Philips / Panasonic / Havels) make.
-
-
-
Gr. Floor
7
72842
10406
S/F of Bakelite angle holder/ batten holder of ISI marked conforming to IS-1258/ 1987 in place of ceiling rose.
-
-
-
Gr. Floor
44
748
17
1st Floor
38
646
17
S/F. of 9 Wt. LED bulb (Philips / Panasonic / Havels) make.
-
-
-
Gr. Floor
44
7480
170
1st Floor
38
6460
170
SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF INDOOR PANNEL BOARD WITH DANGER BOARD. (S/F OF 125A. PANNEL BOARD 36"x24"x10") for Gr. Floor.
-
-
-
16/18 SWG PANNEL BOX 36"x24"x5"= sq.inch for single door made out of CR sheet of 16SWG and boarder angle frame to provide above pannel with proper space, hinges and other accessories, hinged door must be painted one coated red oxide and two coat enamel gray paint 4320sq.inch @1.51.
4320
6523
1.51
Supply and fixing of internal wiring to equipment installed in the pannel board with required size of copper multistrand sinlge core cables duly crimped with copper lugs and all connections 36" x 24" including cost of copper conductor and other fittings like gasket, screw, nut and bolt, insulating materials etc. 864sq. inch@ 0.87.
864
751
0.87
S/F of Bus bar (25x5)mm with required size of insulating materials nut & bolts.
5
2580
516
S/F of 125AMP. 4P 25kA MCCB of L&T / Siemens / Legrand make.
1
11298
11298
S/F of DN4 Extended Rotary Handle.
1
3977
3977
S/F of Spreader Terminal DN0-100 - 4Pole.
1
408
408
S/F of 63AMP. 4P 25kA MCCB of L&T / Siemens / Legrand make.
1
9051
9051
S/F of DN4 Extended Rotary Handle.
1
3977
3977
S/F of Spreader Terminal DN0-100 - 4Pole.
1
408
408
S/F of Ammeter with selector switch including all connections.
1
1398
1398
S/F of Voltmeter with selector switch including all connections.
1
1398
1398
S/F of indicator lamp with toggler switch and fuse.
3
726
242
S/F of CT coil upto 400AMP. Including all connectios.
3
2580
860
l) S/F of 125Amp 4Pole Change over switch (Make- L&T/ Legrand/ Apex)
1
12758
12758
S/F of 40A. 4P MCB make (L&T / Siemens / Legrand)
2
4424
2212
S/F of 63A. 4P MCB make (L&T / Siemens / Legrand)
2
4424
2212
SUPPLY, INSTALLATION, TESTING & COMMISSIONING INDOOR PANNEL BOARD WITH DANGER BOARD. (S/F OF 63A. PANNEL BOARD 30"x30"x10") for Gr. Floor & 1st Floor.
-
-
-
16/18 SWG PANNEL BOX 30"x30"x5"= sq.inch for single door made out of CR sheet of 16SWG and boarder angle frame to provide above pannel with proper space, hinges and other accessories, hinged door must be painted one coated red oxide and two coat enamel gray paint 4500sq.inch @1.51.
4500
6795
1.51
Supply and fixing of internal wiring to equipment installed in the pannel board with required size of copper multistrand sinlge core cables duly crimped with copper lugs and all connections 30" x 30" including cost of copper conductor and other fittings like gasket, screw, nut and bolt, insulating materials etc. 900sq. inch@ 0.87.
900
783
0.87
S/F of Bus bar (25x5)mm with required size of insulating materials nut & bolts.
5
2580
516
S/F of 63AMP. 4P 25kA MCCB of L&T / Siemens / Legrand make.
1
9051
9051
S/F of DN4 Extended Rotary Handle.
1
3977
3977
S/F of Spreader Terminal DN0-100 - 4Pole.
1
408
408
S/F of Ammeter with selector switch including all connections.
1
1398
1398
S/F of Voltmeter with selector switch including all connections.
1
1398
1398
S/F of indicator lamp with toggler switch and fuse.
3
726
242
S/F of CT coil upto 400AMP. Including all connectios.
3
2580
860
S/F of 40A/50/63 A DP MCB make (L&T / Siemens / Legrand)
1
1141
1141
S/F of 40A/50/63 A 4P MCB make (L&T / Siemens / Legrand)
1
2212
2212
l) S/F of 63 Amp 4Pole Change over switch (Make- L&T/ Legrand/ Apex)
1
6556
6556
Supply of PVC Al. Armored cables ISI marked. (Make- Glowstar/ Polycab/ Nicco/ KEI as per Letter No- 309 19.01.2011 of SEEC (R&B) Odisha)
-
-
-
a) 35sq.mm 3 1/2 core
75
16575
221
Supplying and making end termination with brass compression gland & alluminium lugs for following size of PVC insulated cable.
-
-
-
Gr. Floor a) 3 & 1/2 x 35 sq. mm
1
327
327
Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1KV grade of size exceeding 25sq.mm to 120sq.mm direct in ground including excavation, sand crushing protective covering and refilling the trench etc. as required.
-
-
-
Gr. Floor
65
9295
143
Supply and laying 25mm x 5mm Copper strip on surface or in recess for connection etc as required for earthing.
-
-
-
Gr. Floor
25
12950
518
1st Floor
35
18130
518
S/F of copper plate earthing (600 x 600 x 3.15mm) with running copper flat 25 x 5mm from copper plate to funnel of 40mm dia G.I pipe including all accessories.
-
-
-
Gr. Floor
2
20760
10380
S/F of 12mm thick rubber mate.
-
-
-
Gr. Floor
1
500
500
1st Floor
1
500
500
S/F. of Fire Extinguisher ABC type of 6Kg.
Supply, Installation, Testing and commissioning ABC (Powder type) 6 Kg. Capacity Fire Extinguisher, Mild Steel Cylindres ISI marked TAC approved fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged with ABC powder (Mono Ammonium Phosphate) pressured by Nitrogen complete in all respects including wall suspension bracket and conforming to IS: 1349-1993 as required as per specifications. (Fireshield/ Eversafe/ Safex/ Safeguard).
-
-
-
Gr. Floor
8
36000
4500
1st Floor
8
36000
4500
S/F. of CO2 Fire Extinguisher of 4.5Kg.
Supply, Installation, Testing and commissioning ISI marked (IS:2878) Fire Extinguisher, Carbon di-oxide type capacity 4.5 Kg. Flat base including valve, discharge hose of not less than 10 mm dia, 1M long and complete in all respects including intial fill with CO2 gas conforming to IS:307-1966 and wall suspension braket as required as per specification. (Fireshield/ Eversafe/ Safex/ Safeguard).
-
-
-
Gr. Floor
2
15000
7500
1st Floor
2
15000
7500
S/F. of Inverter, UPS 2250 VA (Make Microtech/Su-kam/Luminous)
-
-
-
Gr. Floor
2
27008
13504
1st Floor
2
27008
13504
S/F of Inverter Battery 12V 150AH (Make Exide / Amrom / Su-karm / Luminous with 48 Month warranty).
-
-
-
Gr. Floor
4
60000
15000
1st Floor
4
60000
15000
S/F. of Inverter Stand (Make Microtech/ Su-kam/ Luminous)
-
-
-
Gr. Floor
2
6000
3000
1st Floor
2
6000
3000
S/F of Conventional lightining arrestor
-
-
-
Supply of 16mm, 1.5Mtr. Long, Copper L/A rod with 5Nos. Spike Rod.
25
88250
3530
Fixing Charges of L/A rod
25
25000
1000
S/F of maintenance free Chemical earthing size of earth bar 3 mtr. Long, 17mm dia made with steel core and copper exterior, Chemical compound with suitable proprotionate of 50kg and including all accessories as per the direction of Engineer-in-charge.
3
65430
21810
S/F of copper plate earthing (600 x 600 x 3.15mm) with running copper flat 25 x 5mm from copper plate to funnel of 40mm dia G.I pipe including all accessories.
4
41520
10380
Supply and laying 25mm x 5mm Copper strip on surface for connection as running conductor on Parapet connecting to the down conductors including all accessories.
175
90650
518
S/F of 16 Sq.mm ISI marked FR PVC insulated (unseathed) single core copper conductor.
105
9450
90
Fixing of cable with all fixing materials.
100
15000
150
S/F of 25mm dia (1") PVC pipe for wiring. (Make- Finolex/ Oriplast/ Supreme)
70
10290
147
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements