Works Department Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 42,300Document Cost
₹ 6,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_EICCL_110707_2Tender No
SE/R AND B/ SNPR / 15 / 2024-25Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for PRE CONSTRUCTIONAL Anti-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (plinth area of the building at ground floor only shall be measured for payment).
139.22
118
16427.96
... More
Cement concrete of proportion (1:4:8) in foundation and floors using 4cm size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6") thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties of all materials with all labour and T&P required for the work etc. complete in all respect and as per the direction of the Engineer-in-charge.
7.89
5258
41488.86
... More
Plain cement concrete (1:2:4) using 12mm size black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering, curing etc. complete including cost, conveyance, royalties of all materials with labour,labour cess and T&P etc. required for the work complete as per the direction of the Engineer-in-charge.
15.79
7324
115658.59
... More
First Class Fly Ash. brick masonry of size 23 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with oridinaty Portland slag cement (PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation and plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge
9.07
5481
49715.12
... More
First Class Fly Ash. brick masonry of size 23 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with oridinaty Portland slag cement (PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge
-
-
-
... More
Ground Floor
25.29
5514
139464.23
... More
First Floor
7.47
5861
43783.24
... More
Half brick work with Fly Ash brick masonry in cement motar (1:4) in super structure having crushing strength of less than 75mm kg/sqcm with dimensional tolerance+-2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projection watering and curing after immersing the brick hour before use including cost, conveyance, royalties and taxes of all materials with all labour, labour cess and T&P required for the work complete in all respect as per direction of Engineer-in-Charge
10.13
5514
55862.9
... More
Providing, lifting, hoisting and laying Reinforced cement concrete of M-20 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.
-
-
-
... More
Column Footing
18.14
6255
113468.78
... More
Column up to Plinth and Pedestal
2.37
17805
42198.32
... More
Plinth Beam
8.39
7130
59824.98
... More
Column above Plinth
6.06
17805
107899.51
... More
Roof Beam
7.51
17805
133717.05
... More
Roof Beam
19.07
13395
255444.94
... More
Lintel
2.53
13901
35169.91
... More
Chajja
4.05
1208
4895.88
... More
Cutting, straightening coiled or bent up M.S. Rod or tor steel of SAIL/ TATA / RINL (VIZAG) or equavalant make(Grade Fe-500D) including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Linear measurement will be taken and quantity will be calculated basing on the standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including weight of binding wire will not be considered for measurement) etc. complete as per specification & direction of Engineer-in-charge.
93.49
8832
825748.56
... More
Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
-
-
-
... More
Ground Floor
180.11
185
33412.21
... More
First Floor
77.43
189
14696.21
... More
Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
424.38
266
113271.27
... More
Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
149.12
208
31039.33
... More
Supplying, fitting & fixing of 10mm thick & size of 600x600mm vetrified floor tile of matt finish with veilcraft (VC/FT) shield (Scratch free / stain free) with water absorption limit between 0.08% to 3% and confirming to IS : 15622:2006 (Group B ib) laid on 20 mm thick cement motar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer-in-Charge
104.51
1182
123593.53
... More
Supplying, fitting & fixing of 10mm thick and size of 600x600 mm Vitrified wall tile of in dados skriting and raiser of steps of laid on 12 mm thick cement motar (1:3) (1 cement : 3 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer-in-Charge
16.97
1314
22310.46
... More
Supplying, fitting & fixing of Kota Tile of minimum 16 mm thick Above 0.10 Sqm on 25 mm thick cement motar (1:1) (1 cement : 1 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer-in-Charge
32.2
866
27888.42
... More
Supplying, fitting & fixing of Granite Tile of minimum Above 0.40 Sqm (20mm thick) of approved make in floors laid on 20 mm thick cement motar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer-in-Charge
6.23
2799
17439.64
... More
Supplying, fitting & fixing of Granite Tile of minimum Above 0.10 Sqm & up to 0.4 Sqm (10mm thick) of approved make in floors laid on 12 mm thick cement motar (1:3) (1 cement : 3 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer-in-Charge
1.53
1918
2935.15
... More
Providing and fixing seasoned sal wood work in frame at any location including doors, window cupboard, clerestory and other frames fixing in position including cost of hinges, MS flat (30mmx6mm) hold fasts lugs or dash fasteners of required dia and length as per drawing / specification at all floor and all height
0.32
83598
26751.62
... More
Supplying, fitting and fixing of Factory made 30mm/32mm thick flush door frame made out of non-sal and local wood with BWR ply 4mm thick ISI standard pre laminated on both side as per approved colour, shade, design and with all cost of transportation Aluminium fixtures and labour charges for fixing in position etc. complete in all respect.
16.07
4162
66892.66
... More
Supplying, fitting & Fixing of openable UPVC door with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutter and all fitting and fixtures including cost of materials, conveyance, loading & unloading and taxes of all materials and cost of all labour, sundries, T&P required or all the work complete as per direction of Engineer-in-Charge
13.86
8682
120334.18
... More
Supplying, fitting & Fixing of two track UPVC window with window frame of approved make with 6mm thick glass of approved quality complete with frame, shutter and all fitting and fixtures including cost of materials, conveyance, loading & unloading and taxes of all materials and cost of all labour, sundries, T&P required or all the work complete as per direction of Engineer-in-Charge
10.62
4960
52685.5
... More
Supplying in all floor of M.S. grill, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel window, critical frames for windows, stair case and parapet railing made out of M.S. square bar / flat including stair case hand railing with 40mm dia G.I. pipe etc. including paintingtwo coats over a coat of redoxide primer as per approved drawing and design with cost of all materials & labour, taxes, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge
743.4
79
58728.6
... More
Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in-charge.
-
-
-
... More
Ground Floor
753.6
79
59783.09
... More
First Floor
77.43
81
6284.99
... More
Painting two coat with approved Anti-Fungal Weather seal paints (ISI) of approved colour shade on wall surface of including scaffolding and cleaning the surface before application of approved colour and manufacture as per specification, instruction of Engineer-In-Charge at all elevations including all material labour complete.
-
-
-
... More
Ground Floor
198.64
99
19784.54
... More
First Floor
77.43
104
8075.95
... More
Finishing plastered surface of walls with cement base wall putty of approved make and finishing the surface smooth and even by sand papering to receive paint in walls, at all height with staging wherever necessary with cost, conveyance, taxes of all materials, cost of all labour, all T&P etc. required for the work complete
633
91
57862.53
... More
Wall painting with plastic emulsion paint for two with any approved paint whereever necessxarry with cost, conveyance, taxes of all materials, cost of all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-Charges
573.5
107
61685.66
... More
Painting two coat with approved syntietic enamel paint to new iron / steel work over a coat of Red oxide primer including cost, conveyance, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-Charge
-
-
-
... More
Ground Floor
48.96
260
12761.91
... More
First Floor
10.33
265
2739.52
... More
Supplying and fixing rolling shutters of approved make, made of required size MS laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of provising and fixing necessary 27.5 cm long wire springs manufactured from height tensile steel wire of adequate strength comforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutter (80x1.25mm M.S. laths with 1.25 mm thick top cover)
7.2
2434
17528.4
... More
Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6 mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.
128.68
314
40467.29
... More
PH of Work:- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge -20mm dia C - PVC pipe
20
303
6060
... More
25mm dia C - PVC pipe
30
404
12135
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.-32mm dia PVC ASTM pipe (sch-80)
45
322
14494.5
... More
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.-15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)
7
861
6029.1
... More
15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make)
1
1255
1255
... More
15 mm dia CP S.B. Bib cock(CON-CHR-037KN)
1
1082
1082.8
... More
15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make)
4
1451
5807.6
... More
20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make)
2
1132
2264
... More
WALL MIXER WITH PROVISION FOR OVERHEAD Shower (FLR-ABR-5273UPR)
1
7874
7874.6
... More
15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make)
4
1156
4626.4
... More
25mm dia brass full way valve (Shakti make)
2
1212
2424.4
... More
32mm dia brass full way valve (Shakti make)
2
1774
3549.2
... More
15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make)
1
1648
1648.7
... More
15mm CP Extension piece
19
52
999.4
... More
125mm CP grating
7
87
610.4
... More
15mm size C.P. flange
19
77
1470.6
... More
Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge -2000 liters capacity PVC water storage tank
1
44908
44908.4
... More
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.
6
62
373.8
... More
Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge
2
213
427.4
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
25
223
5595
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. -110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
25
515
12877.5
... More
110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)
2
497
994.6
... More
110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
2
293
587.2
... More
110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
2
232
464
... More
110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
2
407
814.8
... More
110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
1
58
58.2
... More
110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make)
2
457
914.2
... More
110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
2
322
645.4
... More
110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make)
1
551
551.2
... More
110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make)
2
386
772
... More
110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
10
160
1601
... More
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.-580mm size Orissa pan (Hindware/Parryware/Neycer make)
1
3798
3798.8
... More
Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge-10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
2
2368
4736
... More
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge-European water closet with 'p' trap plain(Hindware/Parryware/Neycer make)
1
3230
3230.4
... More
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge-550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal
3
6176
18530.1
... More
Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink
1
5904
5904.8
... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge-25mmx600mm long CP towel rail
2
901
1803.6
... More
Towel ring
4
648
2595.6
... More
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.-600mmx125mm plate glass shelf with CP/NP guard rails.
3
695
2086.8
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.-600mmx450mm size B.E mirror (swivelled type)
3
804
2414.4
... More
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge-CP soap holder
4
280
1120.4
... More
Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.-½” x 5” CP Shower (Plaza Deluxe Make)
2
530
1061.2
... More
Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
8
204
1636.8
... More
Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
4
120
483.2
... More
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge-Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
1
10868
10868.4
... More
Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge
1
1783
1783.5
... More
Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site. 6.30 x0.15
0.95
607
574.47
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge 6.30 x0.10
0.63
7725
4867.19
... More
Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size Kajaria/Somany/Johnson tile 60cmx60cm special printed series to be pre-approved by the Engineer-in-charge )-Kajaria/Somany/Johnson tile 60cmx60cm 2.10 x 1.50 x 2
6.3
1268
7990.92
... More
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
120.96
198
24034.75
... More
Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size Kajaria/Somany/Johnson tile 60cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge )-Kajaria/Somany/Johnson tile 60cmx30cm 2 x (2.10 + 1.50) x 2.10 x 2
30.24
1221
36935.14
... More
Granite Tiles 10mm thick 2.40 x 3.30 x 0.60 x 2
9.5
1842
17504.7
... More
Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. 2 x 2.10 x 0.76
3.19
3430
10943.61
... More
Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge 2 x 4.96
9.92
1114
11053.86
... More
Ext. S/D Portion-Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge-100mm dia P.V.C. pipe
10
1353
13531
... More
150mm dia P.V.C. pipe
10
2183
21833
... More
Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. -MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover )
1
21108
21108.8
... More
Supplying all materials labour T&P and constructing 1.80m dia x 2.60 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
1
25251
25251.6
... More
1 no 30 Users Septic tank- Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.
12.82
293
3756.77
... More
Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.
5.39
314
1695.53
... More
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
0.68
6135
4172.07
... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12m size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
1.56
7725
12052.09
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.
0.61
8458
5159.38
... More
Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
0.49
9242
4528.68
... More
Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge
4.47
755
3374.85
... More
Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge.
5.76
6009
34615.3
... More
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
39.3
210
8276.58
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
16.17
40
661.35
... More
Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification.
5
289
1446
... More
Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge.
2
446
892.8
... More
Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge.
4
607
2431.6
... More
Construction of 1nos production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories-Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only- Drilling of 200mm dia bore-00 mtr to 30mtr
30
755
22664.4
... More
30 mtr to 45mtr
15
836
12544.2
... More
Drilling of 150mm dia bore-45 mtr to 215.00mtr
170
554
94263.3
... More
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.- Lowering of 200mm dia P.V.C casing pipes-00 mtr to 30 mtrs
30
138
4146
... More
30 mtr to 60mtr
15
138
2073
... More
Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.- 200mm dia PVC (sch-80) pipe
45
1633
73521
... More
Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)
1
789
789.8
... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge-By DTH Rig
1
4994
4994.8
... More
Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation:- Rocky terrain with boulder formation for 300m depth
2
1122
2244.22
... More
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make)-1 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby)
1
16737
16737.2
... More
DOL Control panel
1
3805
3805.5
... More
40mm dia steel short piece
1
152
152.3
... More
Well cap
1
152
152.3
... More
50mm size CI bracket
1
91
91.3
... More
2.50sqmm flat cable
110
128
14135
... More
20mm dia rigid UPVC pipes
30
6
207
... More
Steel rope with cover
30
26
801
... More
Labour charges for lowering including transportation
1
2000
2000
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge-32mm HDPE pipes (Finolex/Supreme make)
90
99
8982
... More
E.I. of Work:- Surface/Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor(Make-Havells/Polycab/Finolex/RR Kable or equievalant) of ISI marked with 20 mm dia PVC flexible non metallic conduit(Make-AKG/Polycab or equievalant) with 6A modular type switch(Make-Legrand(myrius),Schneider (Zencelo),Panasonic(vision),Havells(equievalant),Hagar(equievalant) or equievalant) ISI marked , and ceiling rose(Havells/Anchor/equievalant) ISI marked of modular type G.I box with cover , of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge.- GROUP-A(QTRS)
22
612
13464
... More
GROUP-B(QTRS)
11
905
9955
... More
GROUP-C(COMMON ARAE)
11
1278
14058
... More
Group control of point to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor(Make-Havells/Polycab/Finolex/RR Kable or equievalant) of ISI marked with 20 mm dia PVC flexible non metallic conduit(Make-AKG/Polycab or equievalant) with 6A modular type switch(Make-Legrand(myrius),Schneider (Zencelo),Panasonic(vision),Havells(equievalant),Hagar(equievalant) or equievalant) ISI marked , and ceiling rose(Havells/Anchor/equievalant) ISI marked of modular type G.I box with cover , of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge..(Maximum 02 nos point in one circuit)
2.75
1046
2876.5
... More
Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)(Make-Legrand(myrius),Schneider (Zencelo),Panasonic(vision),Havells(equievalant),Hagar(equievalant) or equievalant) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge.
10
196
1960
... More
Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)(Make-Legrand(myrius),Schneider (Zencelo),Panasonic(vision),Havells(equievalant),Hagar(equievalant) or equievalant) with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.
8
547
4376
... More
Supplying,fixing of 16A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type) (Make-Legrand(myrius),Schneider (Zencelo),Panasonic(vision),Havells(equievalant),Hagar(equievalant) or equievalant) with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.
3
684
2052
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC insulated, copper conductor FRLS, single core cable (Make-Havells/Polycab/Finolex/RR Kable or equievalant) or any other equivallent reputed make ISI marked as approved, in recessed PVC conduit Heavy duty (Make-AKG/Polycab or equievalant) of mentioned size or any other equivallent reputed make ISI marked as approved) as required as per direction of Engg.-in-Charge.. -2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty flexible conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)
122.35
157
19208.95
... More
2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR) (2X2.5+1X1.5)
128.7
171
22007.7
... More
4 nos single core 2.5 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor .in 25 mm dia non metallic heavy duty flexible conduit(LDB to LSB/5A SOCKET) (4X2.5+2X1.5)
100
288
28800
... More
2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit . (2X4+1X2.5)
66
188
12408
... More
4 nos single core 4 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty flexible conduit.(PDB to PSB/GAYSER. POINT/AC POINT) (4X4+2X2.5)
66
271
17886
... More
2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty flexible conduit .(PANEL TO BDB EACH QTR) (2X6+1X2.5)
12
220
2640
... More
4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty flexible conduit.(PANEL TO BDB EACH QTR)
21
317
6657
... More
4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuty conductorin 32 mm dia non metallic heavy duty flexible conduit .(LFDB TO FLOOR PANEL TO TPN BDB light ) (4X10+2X4)
15
444
6660
... More
Supplying and fixing 32 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. make for Split ac.(Make-Legrand,Schneider /Panasonic/Havells/Hagar or equievalant)
2
673
1346
... More
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required as per direction of Engg.-in-Charge.(Make-Legrand(myrius),Schneider (Zencelo),Panasonic(vision),Havells(equievalant),Hagar(equievalant) or equievalant) - 4 moudle(125mmx75mm)
1
295
295
... More
1 moudle(75mmx75mm)
1
248
248
... More
12 moudle(200mmx150mm)
1
510
510
... More
Supplying and fixing of following sizes of medium class PVC conduit (Make-AKG/Polycab or equievalant) along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .-20 MM
12
124
1488
... More
25 MM
8
126
1008
... More
Supply and fixing modular type indicator on the existing switch box/cover of Anchor make as required as per direction of Engg.-in-Charge.(Make-Legrand(myrius),Schneider (Zencelo),Panasonic(vision),Havells(equievalant),Hagar(equievalant) or equievalant)
4
112
448
... More
Supplying and installation of AC starter Modular type or any other equivalent reputed make as approved coil voltage-415 Volt A.C. & O/L range of suitable range range on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge .(Make-Legrand(myrius),Schneider (Zencelo),Panasonic(vision),Havells(equievalant),Hagar(equievalant) or equievalant)
2
626
1252
... More
Supplying and fixing step regulator modular type on the existing switch box including connections but excluding box etc. as required as per direction of Engg.-in-Charge.(Make-Legrand(myrius),Schneider (Zencelo),Panasonic(vision),Havells(equievalant),Hagar(equievalant) or equievalant)
6
258
1548
... More
Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover. as required as per direction of Engg.-in-Charge.(Make-Legrand(myrius),Schneider (Zencelo),Panasonic(vision),Havells(equievalant),Hagar(equievalant) or equievalant)
1
213
213
... More
S/F of Bakelite angle holder/batten holder (make-Anchor/Havells/Panasonic or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .
3
75
225
... More
Supplying,fixing of Blanking plate(modular type) in existing switch box(including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..(Make-Legrand(myrius),Schneider (Zencelo),Panasonic(vision),Havells(equievalant),Hagar(equievalant) or equievalant)
6
45
270
... More
(Light fitting Fixture & Fan- Supplying, installation, of exhaust fan of heavy duty 300 mm sweep with louvers any other equivalent reputed make star rated as approved) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Make-Havells/Bajaj/Usha/Cromtron or equievalant model & make.
3
3150
9450
... More
Supplying, installation, testing and commssioning of 1200 mm sweep BLDC type white/milky colour ceiling fan of or any other equivalent reputed make star rated as approved including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge .(With out fan Regulator) Make-Havells/Bajaj/Usha/Cromtron or equievalant model & make.
6
3724
22344
... More
SITC of energy efficient LED tube light fittings with decorative batten and LED tube light having power rating not more than 20 watt and lumen output not less than 1800 lumen complete with electronic driver and all other accessories with diffuser i/c connection etc as required. Similar to wipro/philips/Havells/Bajaj or equievalant make & model.
12
728
8736
... More
SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
make-wipro/philips/Havells/Bajaj or equievalant make & model.
6
736
4416
... More
SITC of Sleek LED 18 watt surface square type fitting with extruded polycarbonate housing,High optically efficient diffuser, complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
make-wipro/philips/Havells/Bajaj or equievalant make & model.
20
1540
30800
... More
Supplying and fixing of Energy efficient recess mounted square shape 20 W LED luminaire of dimension of 225x 225 x 35 mm consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 20 watt and lumen output of 1500 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 2.5 KV , L70 B50: 30000 hrs (2 yrs warranty) and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. make-wipro/philips/Havells/Bajaj or equievalant make & model. equievalant reputed make & model A catagory ISI marked as approved).
4
1540
6160
... More
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge .
(Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.
18
33
594
... More
Supplying, Erection, Fixing, connection & testing of LED top Light of elegant look Panasonic/philips/wipro or equievalant reputed make & model A catogory, ISI marked as approved 45 W LED street light having die cast aluminium housing with toughened glass having lumen efficacy of 110 lm/w or more (As per LM 79 report of third party NABL lab) ,IP 65 protection or more , LED street light make-wipro/philips/Havells/Bajaj or equievalant make & model. reputed make A catagory ISI marked as approved having warrantied . . The luminaire should be supplied along with bracket maintenance free for inspection as required as per direction of Engg.-in-Charge.
1
3145
3145
... More
TELEPHONE -Supplying and drawing 4 pair Telephone WIRE protected with PVC sheath in the with surface/ recessed steel/ PVC conduit as required as per direction of Engg.-in-Charge. Make-Legrand or equievalant.
21
49
1029
... More
Supplying and telephone socket socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required as per direction of Engg.-in-Charge. Make-Legrand/Havells/panasonic/schneider or equievalant make & model.
1
572
572
... More
Supplying & Commissioning of IP Telephone Hand Set as per direction of Engg.-in-Charge.
1
600
600
... More
Supplying and drawing RG6 TV Cable protected with PVC sheath in the with surface/ recessed steel/ PVC conduit as required as per direction of Engg.-in-Charge. Make-Legrand or equievalant.
21
67
1407
... More
Supplying and TV socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required as per direction of Engg.-in-Charge. Make-Legrand/Havells/panasonic/schneider or equievalant make & model.
2
470
940
... More
Supply,installation, testing and commissioning of 4 MP Dome / Bullet Camera with 25 Mtrs IR Range Make-Hikvision or equievalant.
2
15800
31600
... More
Supply & Laying of RG59+ 3 Core cable using Rigid PVC Pipe in concealed manner per running metre of cable laid.Make-Legrand or equievalant.
34
88
2992
... More
BDBS,DB,AC DB,FLOOR PANELS,MCBS-Supplying and fixing of following mentioned way, three pole/single pole and neutral, 1.6 mm thickness sheet steel,double door MCB distribution board, 415 volts/240 volts, on surface/recess, complete with terminal blocks, duly prewired with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. , or any other equivallent A catagories reputed make ISI marked as approved as per direction of Engg.-in-Charge. make-Legrand/schneider/Siemens/ABB/Hagar or equievalant make & model.-4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door(FOR LIGHT,POWER INDOOR,3-PH,POWER LOAD) Warranty on DB is 2 years.
1
2224
2224
... More
2+4 way MCB Enclosure DB (GLAZED door)(only each EM. CONNECTION UPS LOAD)
1
1690
1690
... More
Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of make or any other equivallent A catagories reputed make ISI marked as approved in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABB/eq
14
144
2016
... More
Supplying and fixing 63Amps TPN 415 volts, RCCB,300mA Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.
1
2683
2683
... More
Supplying and fixing 25Amps DP 240 volts, RCCB,300mA Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABBor equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.
1
1710
1710
... More
(Earthing) INSTALLATION- S/IT/C of materials and installation of pipe earth electrode made out of 50mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ termination of G.I. flat / wire with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.
2
2548
5096
... More
Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge.
12
109
1308
... More
Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.(DOUBLE RUN TO MAIN PANEL & APFC PANEL ,AC PANEL)
1
1118
1118
... More
CABLING AND END TERMINATION MAIN AREA- Supplying of one number PVC insulated armoured and PVC sheathed AL. conductor power cable of 1.1 KV grade of following size cables as per direction of Engg.-in-Charge. make-polycab/finolex/Havells or equievalant make.- 4core x 25 sq mm
30
210
6300
... More
LAYING OF CABLE- Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
30
155
4650
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge. - 4 core x25sq mm
2
320
640
... More
Providing,fixing and laying of fallowing dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. - 50 mm dia
5
433
2165
... More
CABLE TRAY / RACE WAY FOR DISTRIBUTION OF POWER-0 HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x 200mm(W), of reputed make ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge. make-Legrand/schneider/Siemens/ABB/Hagar or equievalant make & model.
2
594
1189.72
... More
LIGHTENING PROTECTION- AIR TERMINAL & ACCESSORRIES LIGHTNING ARRESTER+ MAST: Providing and fixing of lightning conductor finial made of 25 mm dia 300 mm long, G.I tube,having single prong at top, with 85 mm dia 3 mm thick G.I base plate including holes etc complete as required with as per direction of Engg.-in-Charge.(RATE REFERING OSR 2018 SOR NO-4.2) .The entire LA system should be Replacement Warranty will be 5 years
6
396
2376
... More
Reveting, sweating and soldering of copper / G.I. tape ( with another copper / G.I. tape, base of the finial or any other metallic object) as required .as per direction of Engg.-in-Charge. (RATE REFERING OSR 2018 SOR NO-4.4) The entire LA system should be Replacement Warranty will be 5 years
8
186
1488
... More
Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run) as per direction of Engg.-in-Charge.(RATE REFERING OSR 2018 SOR NO-4.7) The entire LA system should be Replacement Warranty will be 5 years
8
468
3744
... More
Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For virtical run) as per direction of Engg.-in-Charge. (RATE REFERING OSR 2018 SOR NO-4.8) The entire LA system should be Replacement Warranty will be 5 years
8
92
736
... More
Providing and fixing of testing joint, made of 20 mm x 3 mm thick G.I. strip, 125 long with 4 nos of G.I. bolts, check nuts and spring washer etc complete as required as per direction of Engg.-in-Charge. (RATE REFERING OSR 2018 SOR NO-4.12) The entire LA system should be Replacement Warranty will be 5 years
2
70
140
... More
Providing and laying of G.I. tape 32 mm x 6 mm from earth electrode directly in ground as required as per direction of Engg.-in-Charge. .(RATE REFERING OSR 2018 SOR NO-4.14) The entire LA system should be Replacement Warranty will be 5 years
2
92
184
... More
EXTINGUISHER SYSTEM- Portable Fire Extinguisher System Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made from ISI marked seamless cylinder confirming to IS: 7285, fitted with ISI marked controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket as per direction of Engineer-in-charge.
1
12126
12126
... More
Providing and fixing the signages "Fire Exit, Fire Exit Arrow Down,Fire Exit Arrow Left,Fire Exit Arrow Right" of 1.5in height letters in white with green back ground.The size of the board shall be 25cm x 15 cm and shall be fixed at the height of 2 mts
1
916
916
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%