Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Works Department - EICCL Tender
Civil And Construction
Building Construction
Eprocure
Opening Date31 Jan 2025
Closing Date10 Feb 2025
Tender Amount₹ 66,52,030
Costs
EMD
₹ 66,500Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_EICCL_110001_1Tender No
S.E. (RnB) KPD-I 12/2024-25Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supplying and filling sand in foundation and over areas including watering, ramming, consolidating and dressing, labours, tools, taxes etc. all complete as per the specification and direction of Engineer-In-Charge.
60.07
-
-
... More
Diluting and injecting chemical emulsion for PRE CONSTRUCTIONAL Anti-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (plinth area of the building at ground floor only shall be measured for payment).
115.66
-
-
... More
Providing and laying plain cement concrete 1:3:6 (1 cement: 3 sand: 6 stone aggregate 12mm nominal size) as levelling course in foundation and plinth etc. including tempering, curring, shuttering etc.complete all depth and height.
26.12
-
-
... More
Providing and laying plain cement concrete 1:2:4 (1 cement: 2 sand: 4 stone aggregate 12mm nominal size) as levelling course in foundation and plinth etc. including tempering, curring, shuttering etc.complete all depth and height.
8.87
-
-
... More
First class Fly ash Brick masonry using bricks of size 23 cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.
10.39
-
-
... More
Fly Ash. brick masonry of size 23 cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with approved grade cement and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge
42.22
-
-
... More
Half brick work with Fly Ash brick masonry in cement mortar (1:4) in super structure having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge.
0.92
-
-
... More
Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. A) Pile Cap
93.46
-
-
... More
B) Plinth Beam
8.55
-
-
... More
C) Column above plinth
5.69
-
-
... More
D) Lintel : 250 mm wall
2.85
-
-
... More
E) Chajja
5.46
-
-
... More
F) Roof Beam
6.65
-
-
... More
G) Roof Slab
13.16
-
-
... More
H) Staircase
1.54
-
-
... More
Cutting, straightening coiled or bent up M.S. Rod or tor steel of SAIL/ TATA / RINL (VIZAG) make including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Linear measurement will be taken and quantity will be calculated basing on the standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including weight of binding wire will not be considered for measurement) etc. complete as per specification & direction of Engineer-in-charge.
141.58
-
-
... More
12mm cement plaster to out side of brick surfaces with cement mortar of mix 1:6 (1 cement : 6 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights.
167.89
-
-
... More
16mm cement plaster to inside of brick surfaces with cement mortar of mix 1:6 (1 cement : 6 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights.
322.36
-
-
... More
Supplying, fitting and fixing Vitrified Tile in floors of size 600mm x 600mm (Plain/Ivory) of approved make confirming to IS:13755 laid on 20mm thick cement mortar (1:4) (1 cement : 4 Course Sand) and filling joints with white cement of approved quality including cost, conveyance, taxes, cost of all labour, labour cess, etc. as per the direction of Engineer-in-Charge.
75.99
-
-
... More
Supplying, fitting and fixing of vitrified tiles (Plain/Ivory) in dados, skirting and risers of steps over 12mm thick cement mortar (1:3) jointed with neat cement slurry mixed with colouring pigments to match the colour and shade including the cost of washing, polishing, cost of materials, cost of all labour, conveyance, taxes, loading & unloading, T&P, watering and curing etc. complete.
65.03
-
-
... More
Supplying, fitting & fixing of 300mm x 300mm Ceramic wall tiles in dadoes, skirting and risers of steps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge
31.21
-
-
... More
Supplying, fitting & fixing of Chequered tiles in floors of approved make laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge.
7.28
-
-
... More
Providing & Fixinng factory made 100% Solid WPC ( Wood Polymer Composite ) - Door Frame 125 mm x 65 mm Single Rebated, made from Wood Polymer Composite ( Single Extruded Process ) material comparising of virgin PVC polymer of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and Natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic additives fabricated with meter Joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/ cbm & an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of ( Min. 990 N ), Minimum Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof , water / Moisture Proof & Fire retardant & Fixed in position with SS Dash Fasteners / Hold Fast of reuired dia and lenght, , all as per specifications drawings as directed by the Engineer-In-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company.
21.95
-
-
... More
Factory made 30mm/32mm flush door shutter (Laminates both side of frame) with all labour, iron fittings, and wooden hinged cleats etc fitted and fixed complete in all respect
10.82
-
-
... More
Providing and fixing factory made 2 track 2 panel uPVC white colour sliding window comprising of uPVC multi-chambered frame having section Frame 58mm x 49mm, Window sash: 37mm x 61mm, made out of lead free green profiles with corners fusion welded, fully reinforced with Galvanized steel 1.5/2.0 mm. The windows profile should fulfill the requirements of Viny 2010. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The window comprising of uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size. The sash will be fitted with 5mm clear glass ( float ).complete in all respect as per specification and direction of the Engineer in Charge. etc. complete
12.34
-
-
... More
Factory made single leaf rigid PVC Door sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter with FRP frame of size 45x90mm.(Darwaja /Exon Door make)
3.19
-
-
... More
Supplying and Fixing of M.S. Grills, M.S.Doors, M.S. Gate etc including cost,conveyance of all materials,priming,and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge
313.38
-
-
... More
Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in-charge.
490.25
-
-
... More
Providing and painting with two coats of Weather Coat of approved quality, make and shade to give an even surface including the cost of all materials, labour, conveyance, taxes, loading, unloading, scaffolding, T&P, etc. all complete as per the direction of Engineer-in-charge.
167.89
-
-
... More
Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, taxes of all materials, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.
490.25
-
-
... More
Painting two coats with approved plastic emulsion paint of make Dulux / Berger / Asian to inside surface of walls finished with Acrylic Wall putty (water based) of make (Birla / JK) and finished smooth & even surface to receive painting using roller to the final coat including cost of scaffolding staging charges with cost, conveyances, taxes of all materials, cost of labour, T&P required for the work etc. complete for all floors as per specification & direction of the Engineer-in-charge.
322.36
-
-
... More
Painting two coats with approved Enamel Paint over a coat of primer on Iron work in Ground Floor with cost, conveyances, taxes of all materials, cost of labour, T&P required for the work etc. complete as per specification & direction of the Engineer-in-charge.
12.34
-
-
... More
Supplying, fitting and fixing of Stainless steel of 304 grade in hand ralling using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm X 32mm X 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm X 32mm X 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes, all materials, labour, T&P etc. required for the complete in all respect.
6.71
-
-
... More
2.5 cm thick grading concrete (1:2:2) on roof slab with 6.7mm & down grades size hard granite crusher broken chips on new work in Ground Floor with cost, conveyances, taxes of all materials, cost of labour, T&P required for the work etc. complete as per specification & direction of the Engineer-in-charge.
115.52
-
-
... More
First Floor
Fly Ash. brick masonry of size 23 cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with approved grade cement and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge
31.54
-
-
... More
Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. A) Column
4.17
-
-
... More
B) Chhajja
1.78
-
-
... More
C) Roof Beam
3.33
-
-
... More
D) Roof Slab
5.61
-
-
... More
Cutting, straightening coiled or bent up M.S. Rod or tor steel of SAIL/ TATA / RINL (VIZAG) make including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Linear measurement will be taken and quantity will be calculated basing on the standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including weight of binding wire will not be considered for measurement) etc. complete as per specification & direction of Engineer-in-charge.
14.69
-
-
... More
12mm cement plaster to out side of brick surfaces with cement mortar of mix 1:6 (1 cement : 6 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights.
256.97
-
-
... More
16mm cement plaster to inside of brick surfaces with cement mortar of mix 1:6 (1 cement : 6 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights.
121.21
-
-
... More
Supplying, fitting and fixing Vitrified Tile in floors of size 600mm x 600mm (Plain/Ivory) of approved make confirming to IS:13755 laid on 20mm thick cement mortar (1:4) (1 cement : 4 Course Sand) and filling joints with white cement of approved quality including cost, conveyance, taxes, cost of all labour, labour cess, etc. as per the direction of Engineer-in-Charge.
24.15
-
-
... More
Supplying, fitting & fixing of 300mm x 300mm Ceramic wall tiles in dadoes, skirting and risers of steps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge
15.61
-
-
... More
Providing & Fixinng factory made 100% Solid WPC ( Wood Polymer Composite ) - Door Frame 125 mm x 65 mm Single Rebated, made from Wood Polymer Composite ( Single Extruded Process ) material comparising of virgin PVC polymer of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and Natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic additives fabricated with meter Joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/ cbm & an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of ( Min. 990 N ), Minimum Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof , water / Moisture Proof & Fire retardant & Fixed in position with SS Dash Fasteners / Hold Fast of reuired dia and lenght, , all as per specifications drawings as directed by the Engineer-In-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company.
5.41
-
-
... More
Factory made 30mm/32mm flush door shutter (Laminates both side of frame) with all labour, iron fittings, and wooden hinged cleats etc fitted and fixed complete in all respect
2.54
-
-
... More
Providing and fixing factory made 2 track 2 panel uPVC white colour sliding window comprising of uPVC multi-chambered frame having section Frame 58mm x 49mm, Window sash: 37mm x 61mm, made out of lead free green profiles with corners fusion welded, fully reinforced with Galvanized steel 1.5/2.0 mm. The windows profile should fulfill the requirements of Viny 2010. The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weatherability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The window comprising of uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size. The sash will be fitted with 5mm clear glass ( float ).complete in all respect as per specification and direction of the Engineer in Charge. etc. complete
3.68
-
-
... More
Factory made single leaf rigid PVC Door sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter with FRP frame of size 45x90mm.(Darwaja /Exon Door make)
1.6
-
-
... More
Supplying and Fixing of M.S. Grills, M.S.Doors, M.S. Gate etc including cost,conveyance of all materials,priming,and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge
93.36
-
-
... More
Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in-charge.
378.18
-
-
... More
Painting two coats with approved anti-fungal weather seal paints (ISI) of approved colour, shade on wall surface over a coat of wall primer(ISI) water bound including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labour,labour cess with T&P etc, complete as per specification & direction of Engineer-in-charge.
256.97
-
-
... More
Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, taxes of all materials, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.
378.18
-
-
... More
Painting two coats with approved plastic emulsion paint over a coat of wall primer of make Dulux / Berger / Asian to inside surface of walls finished with Acrylic Wall putty (water based) of make (Birla / JK) and finished smooth & even surface to receive painting using roller to the final coat including cost of scaffolding staging charges with cost, conveyances, taxes of all materials, cost of labour, T&P required for the work etc. complete for all floors as per specification & direction of the Engineer-in-charge.
121.21
-
-
... More
Painting two coats with approved Enamel Paint over a coat of primer on Iron work with cost, conveyances, taxes of all materials, cost of labour, T&P required for the work etc. complete as per specification & direction of the Engineer-in-charge.
3.68
-
-
... More
PH PORTION
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge. 20mm dia PVC ASTM pipe (sch-80)
18
-
-
... More
25mm dia PVC ASTM pipe (sch-80)
30
-
-
... More
32mm dia PVC ASTM pipe (sch-80)
45
-
-
... More
40mm dia PVC ASTM pipe (sch-80)
10
-
-
... More
Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. 250mm thick wall
3
-
-
... More
Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing GI pipes / PVC pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of the Engineer in charge.In ground floor
2
-
-
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge.In ground floor
20
-
-
... More
Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge. 15 mm dia CP two way Bib cock (Plaza / Aquatic /Amber make )
3
-
-
... More
15mm dia CP Health foucet (Plaza / Aquatic /Amber make )
3
-
-
... More
15 mm dia CP Long body Bib cock (Plaza / Aquatic /Amber make )
3
-
-
... More
15mm dia CP angle stop cock (Plaza / Aquatic /Amber make ) Make
6
-
-
... More
20mm dia CP concealed stop cock (Plaza / Aquatic /Amber make )
3
-
-
... More
25mm dia CPVC full way valve (Ashirvad Make)
3
-
-
... More
32mm dia CPVC full way Valve (Ashirvad Make)
2
-
-
... More
40mm dia CPVC full way Valve (Ashirvad Make)
1
-
-
... More
15mm dia CP flange
12
-
-
... More
15mm dia CP extension piece
12
-
-
... More
Supplying all materials, labour, T&P and fitting and fixing CP shower with 15mm or 20mm inlet with CP shower arm including polishing all complete as per specification and direction of the Engineer in charge 15mm dia CP revolving shower ( Plaza make )
3
-
-
... More
Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge 10 litres capacity pvc low level cistern with 32mm dia CP long flush bend Slimline white
3
-
-
... More
Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge On the roof of first floor 2000 litre capacity water storage tanks with Staging
1
-
-
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge In ground floor 110mm dia U-PVC SWR pipe(Ashirbad / Supreeme )
45
-
-
... More
110mm U-PVC door tee
3
-
-
... More
110mm U-PVC door bend
2
-
-
... More
110mm U-PVC plain bend
3
-
-
... More
110mm U-PVC Plain tee
3
-
-
... More
110mm dia U-PVC 'P' trap
6
-
-
... More
110mm dia U-PVC Plain Shoe Bend
2
-
-
... More
110mm dia U-PVC offset with out ear
2
-
-
... More
110mm dia U-PVC cowl
6
-
-
... More
125mm dia CP grating
6
-
-
... More
Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge 250mm to 375mm thick wall
6
-
-
... More
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per European water closet with ‘S’ trap plain (Parryware / Nycer make ) specification and direction of the Engineer in charge.
3
-
-
... More
Supplying all materials, labour, T&P and fixing bowl pattern urinal conforming to IS:771-part-3-1985 of the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge. Stall urinal (Parryware / Hindware make )
3
-
-
... More
15mm dia urinal spreader
3
-
-
... More
32mm dia C.P. dome waste
3
-
-
... More
Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge.550mmx400mm size wash hand basin with porcelain pedestal Parryware/ Hind ware /Neyser make )
3
-
-
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted minimum 5mm thickon 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge . 600mmx450mm size B.E mirror x minimum 5mm thick(Alpina make )
3
-
-
... More
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge Acrylic glass shelf with CP guard rails
3
-
-
... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 25mmx600mm long CP towel rail
3
-
-
... More
C.P. Ring Towel Rail
3
-
-
... More
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge CP soap holder
3
-
-
... More
Supplying all materials labour T&P and filling in foundation and plinth with sandwell watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of Engineer in charge
1.94
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.
0.32
-
-
... More
in first floor
0.16
-
-
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
28.14
-
-
... More
In Fist floor
14.07
-
-
... More
Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. 30 cm. x 30 cm. Kajaria / Somany / Johnson to be pree approved .In ground floor
6.8
-
-
... More
First Floor 1 x 1.80 x 1.80
3.4
-
-
... More
Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge.45cm. x 30cm. Kajaria / Somany / Johnson to be pree approved .In ground floor In ground floor
28.14
-
-
... More
In Fist floor
14.07
-
-
... More
Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter with FRP frame of size 45x90mm.(Darwaja /Exon Door make)
5.04
-
-
... More
EXTERNAL P.H. WORK Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. 110mm dia
16.83
-
-
... More
Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, KB brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge. Inside size 250mmx250mm
2
-
-
... More
Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:1.5:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 760mmx760mmx460mm
3
-
-
... More
Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and fly ash brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge 1.20m dia x 2.00m deep soakway pit
1
-
-
... More
Construction of Under ground RCC water storage Sump tank.Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.
13.5
-
-
... More
Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.
4.5
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.In ground floor
0.9
-
-
... More
Supplying all materials, labour, T&P and providing shoring and shuttering for foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per specification and direction of the Engineer in charge
24
-
-
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
5
-
-
... More
RCC beam,Column, girders and bressmer etc
36
-
-
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
5.06
-
-
... More
Supplying all materials, labour,T&P and providing cement concrete(1:1 ½:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
6.74
-
-
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:3) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor (inside/outside)
40
-
-
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor (inside/outside)
20
-
-
... More
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
5
-
-
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
4.95
-
-
... More
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge 1 H.P Sump Submersible pump ( Kirloskar Make)
1
-
-
... More
2.50sqmm flat cable
60
-
-
... More
20mm dia rigid UPVC pipes
53.8
-
-
... More
Labour charges for lowering including transportation
1
-
-
... More
EI PORTION
Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal 6A modular type ( flame retradant type) switch ISI marked (Make: legrand (Mylinc)/schneider (clipsal)/hager (Insysta) ) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) ( flame retradant type) (Make: legrand (Mylinc)/schneider (clipsal)/hager (Insysta) or Equivalent ) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. light point Group-A
14
-
-
... More
-do- light point Group-B
8
-
-
... More
-do- light point Group-C
15
-
-
... More
-do- Fan point Group-B
4
-
-
... More
-do- Fan point Group-C
5
-
-
... More
-do- call bell point Group-C
1
-
-
... More
Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( ( flame retradant type)) with suitable size modular box & cover( flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..(Make: legrand (Mylinc)/schneider (clipsal)/hager (Insysta)or Equivalent ) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 2 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
3
-
-
... More
On Existing board-
5
-
-
... More
Supply and fixing of Multipurpose board having prov. Of 2Nos 6Amp plug with 6Amp switch on existing board (Modular) (Make: legrand (Mylinc)/schneider (clipsal)/hager (Insysta) or Equivalent )
7
-
-
... More
S/F of Multipurpose board consisting 3nos. 6Amp plug and switch and 1 No of 15/16amp plug and switch Modular on metal box and Modular cover with all connections(Make: legrand (Mylinc)/schneider (clipsal)/hager (Insysta) or Equivalent )
2
-
-
... More
S/F of metal Box of 180mm x100 X 60 mm nominal size in recess with suitable size of phenolic laminated sheet cover infront including providing and fixing of 5 pin,15/16 Amp Modular socket out let and 15/16 Amp Modular switch ISI marked connection painting etc as required complete in all respect as per direction of Engineer in charge (Make: legrand (Mylinc)/schneider (clipsal)/hager (Insysta) or Equivalent )
4
-
-
... More
Recessed Extra lead Sub-main wiring for light and fan point in 2x1.5mm2 FR PVC insulated single core multistrand copper conductor of ISI Marked confirming to IS-694/1990 in 20mm dia nonmetalic heavy duty conduit 1.6 sqmm thick along with 1x1.5 sqmm FRLS PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge(Make of wire Finolex / Havells /Polycab or Equivalent) 2x1.5 sqmm +1x1.5 sqmm 1100 Volts confirming to IS 694/1990
75
-
-
... More
Recessed wiring to Sub-main in 2x2.5 sqmm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 20mm dia non metalic heavy duty flexible conduct 1.6mm thick along with 1x1.5sqmm FRLS PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / Havells /Polycab or Equivalent) 2x2.5 sqmm +1x1.5 sqmm 1100 Volts confirming to IS 694/1990
154
-
-
... More
Recessed wiring to Sub-main in 2x4 sqmm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 20mm dia non metalic heavy duty flexible conduct 1.6mm thick along with 1x1.5sqmm FRLS PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / Havells /Polycab or Equivalent) 2x4 sq mm+1x1.5 sqmm 1100 Volts confirming to IS 694/1990
52
-
-
... More
Recessed wiring to Sub-main in 2x6 sqmm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 32mm dia non metalic heavy duty flexible conduct 1.6mm thick along with 1x2.5sqmm FRLS PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / Havells /Polycab or Equivalent) 2x6 sq mm+1x2.5 sqmm 1100 Volts confirming to IS 694/1990
42
-
-
... More
Recessed wiring to Sub-main in 4x6 sqmm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 32mm dia non metalic heavy duty flexible conduct 1.6mm thick along with 2x2.5sqmm FRLS PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / Havells /Polycab or Equivalent) 4x6 sq mm+2x2.5 sqmm 1100 Volts confirming to IS 694/1990
22
-
-
... More
Supply of 10 sq. mm 4 Core 1.1KV Grade ISI Marked pvc insulated pvc sheathed XLPE Alluminium Armored power Cable (Make-Polycab /Havells/Finolex or Equivalent)
5
-
-
... More
Laying and fixing of one number of PVC insulated and PVC sheathed/ XLPE power cable of 1.1KV grade of size not exceeding 25 sq.mm on surface as required.
5
-
-
... More
S/F of 8 way SPN MCB DB on existgsurface / wall mounting with all connection complete in all respect as per direction of engineer incharge (Make : Schneider (ACTI 9 ) /legrand (Ekinox 3) /siemens (Betaguard) or Equivalent )
1
-
-
... More
S/F of 12 way SPN MCB DB on existgsurface / wall mounting with all connection complete in all respect as per direction of engineer incharge (Make : Schneider (ACTI 9 ) /legrand (Ekinox 3) /siemens (Betaguard) or Equivalent )
1
-
-
... More
S/F of 4 way TPN (8+12) MCB DB on existgsurface / wall mounting with all connection complete in all respect as per direction of engineer incharge (Make : Schneider (ACTI 9 ) /legrand (Ekinox 3) /siemens ( Betaguard) or Equivalent )
1
-
-
... More
Supply and fixing of SP 6-32 A, 10 KA rating 240 V "C" series miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand (DX 3)/siemens (Betaguard) /Hager or Equivalent)
15
-
-
... More
Supply and fixing of DP 6-32 A, 10 KA rating 240 V "C" series miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand (DX 3)/siemens (Betaguard) /Hager or Equivalent)
5
-
-
... More
Supply and fixing of RCCB DP 25 A rating 240V 30 MA breaker suitable for lighting and other loads in the existing DB ISI marked complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand (DX 3)/siemens (Betaguard) /Hager or Equivalent )
2
-
-
... More
Supply and fixing of RCCB FP 40 A rating 240 /415V 100 MA breaker suitable for lighting and other loads in the existing DB ISI marked complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand (DX 3)/siemens (Betaguard) /Hager or Equivalent )
1
-
-
... More
Supply and fixing of FP 40 - 63 A, 10 KA rating 415V "C" series miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand (DX 3)/siemens (Betaguard) /Hager or Equivalent )
1
-
-
... More
S/F of Bakelite Angle holder/Batten Holder of ISI marked in place of ceiling Rose complete in all respect as per direction of Engineer in charge (Make : Cona / Anchor / Havell'sor Equivalent )
5
-
-
... More
Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min ( Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years.. .(With fan Regulator)
7
-
-
... More
S/F of 12 inch Heavy duty (Metalic Colour) Exahust Fan with wall cutting, S/F of proper size of hume pipe, concreating, plastaring, painting with all connection testing and commissioning complete in all respect as per direction of Engineer in charge (Make:- Almonard / Usha- S. PH Turbo/Crompton - Trans Air/Khaitan,/ Havells)
2
-
-
... More
S/F of Call Bell /Buzzer ISI marked suitable for AC/Dc single phase 230 V complete . (Make:- Cona/ Anchor)
1
-
-
... More
Supply and fixing of 9 watt,CW/WW 6500K,1800 Lumen led bulb on wall ,making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Panasonic/ Great white/ Havells/ wipro)
5
-
-
... More
Supply and fixing of 10 W LED BH Fitting Light ,making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj)
3
-
-
... More
Supply and fixing of 18 watt Recess Light ,making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Panasonic/ Great white/ Orient/ wipro/ Havells/Phillips)(2Years Warranty)
8
-
-
... More
Supply and fixing of 18 watt Surface Light ,making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Panasonic/ Great white/ Orient/ wipro/ Havells/Phillips)(2Years Warranty)
4
-
-
... More
Supply and fixing of 34 watt Surface Light ,( WARM WIGHT)making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Panasonic/ Great white/ Orient/ wipro/ Havells/Phillips)(2Years Warranty)
1
-
-
... More
Supply and fixing of 20watt,CW/WW 5700K,1800 Lumen led Aluminium Housing batten on wall ,making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Panasonic/ Great white/ Orient/ wipro/ Havells/Phillips)(2Years Warranty)
14
-
-
... More
S/F of Street light-ENDURA 90W CITYLINER NEO new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover.(Make : Panasonic/ Great white/ Orient/ wipro/ Havells/Phillips)(2Years Warranty)
4
-
-
... More
Fixing of Street light with G.I bracket and pipe
4
-
-
... More
S/F of A.C. point consisting of 32 amp industrial male female socket &top with 20-32 amp single phase starter with all connection complete in all respect as per direction of engineer incharge (Make: legrand (Myrius)/schneider)
3
-
-
... More
Supply and fixing copper plate earthing 600 mm X 600 mm X 3.15 mm thick ISI marked including accessories and providing masonary with charcoal and salt with all connection complete in all respect as per direction of engineer incharge
2
-
-
... More
Providing and fixing 25mm x 5 mm copper strip on surface or in recess for loop earthing along with existing surface / recessed conduit with all connection complete in all respect as per direction of engineer incharge
20
-
-
... More
S/F of 16-100 A cubical panel board made of 16 SWG C.R sheet with powder coated with provision of following items with fabrication erection testing & comissioning of total enclosed panel board of size not less than 32"x32"x8" with (25 X 6 mm ) of 16-100A , 415V 4strip & internal connection & provision for termination of incomming & out going cable , earthing etc, complete with supply & fixing of following switch gears. 1. MFM 2. RYB Indicator 3. SPD 4. 63 Amp 4 P 16 KA MCCB , 63A changeover earthing connector ,stand, Cable alley.
1
-
-
... More
Supply and fixing of 4 pole (3P+N) ( T1+T2 - Iimp 8 kA/pole T2 - 60 kA) 40 KA SPD in existing cubicle panel board including drilling holes in cubcle panel, making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand (DX 3)/siemens (Betaguard) /Hager/OBO or Equivalent )
1
-
-
... More
Supply and fixing of 4 pole MCCB 16-100A,Ics = 100% Icu, 16 KA breaking capacity, adjustableThermal,fixed magnetic type in existing cubicle panel board including drilling holes in cubcle panel, making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand (DX 3)/siemens (Betaguard) /Hager or Equivalent )
1
-
-
... More
Supply and fixing of Digital Meter Displays Current, line to neutral & line to line Voltages, frequency & Power Factor. (VA & PF - Phase Wise & Average) IEC 62053-21 complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand (DX 3)/siemens (Betaguard) /Hager or Equivalent)
1
-
-
... More
Supply and fixing of 4 pole 63AMP changeover in existing cubicle panel board including drilling holes in cubcle panel, making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand /siemens (Betaguard) /Hager/L&T or Equivalent )
1
-
-
... More
Supply and Installation of 4 KVA Real Power- 2850 W 48 Volt Inverter LED Display
Turbo mode to increase output voltage Support single battery
Compatible with Tubular Flat plate & SMF (Make:- Luminous iCruze 5000+ / Liv fast or Equivalent)
1
-
-
... More
Supply and Installation of Battery 220 Ah capacity, 12V, Warranty - 48* Months Tubular Technology battery – Robust Tubular plates Low antimony alloy used for low maintenance Suitable for areas with frequent and long power cuts Excellent overcharge tolerance (accepts very deep discharge-suitable for areas with long power cut) Factory charge battery in ready to use condition (Make:- Luminous RC 26000 Pro /Livfast or Equivalent )
4
-
-
... More
Supply and fixing of Battery Rack Made up of 50mm/ 5mm MS Angle
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements