Works Department Tender

S/F of 2.5 mm sq , 3core round flexible copper cable for wiring from junction box of light fitting of arm (Havells,polycab,finolex)

S/F of 3 core 6sq mm al. armourmed cable (Havells,polycab)

Cable laying under ground

S/F of ICPD 32amp main switch (anchor,havells)

S/F of DP Switch for on/off of street light (anchor,havells)

Supply and installation of No. 6 G.I wire coil Earthing with supply of all earthing metarial such as charcoal, salt and other necessary earthing metarials , labour etc. as required.

Supply, foundation, installation, commissiosnisng and erection of 16M high mast fabrication part as per dimension top dia 150mm bottom dia not less than 410mm thikness 4/3 mm base plate thikness not less than 30 mm, PCD not less 490mm foundation boltnot less than M30 /850 x 8 nos, 3 wire system, head frame and lantern ring suitable to fix 9 nos light with out LED flood light with all 16M Accessories double drum double gear winch motor ss wire rope (Grade AIS 316),trailing cable (1 set sqmm) lighting arrestor and earthing spikes 1 avaiation lamps junction box head frame in complete respect Each including all required accessories High mast must be treated galvanised as per BSEN 100251 (make Bajaj/ Valmont/ transrail or its equivalent) its also includes 8nos of earthing of high mast with 3m long 40mm dia G.1 Pipe and all other required accessories including 25 x 3mm GI flat chemical earthing with test certificate and EPR Insulated PCP sheathed 4 Sq.mm 5 core Cu cable for intrenal wiring and including suitable foundation with concrete as per approved

Supply and laying of 1.1 KV Grade XLPE insulated armoured Aluminium main power cable size of 3.5C x 25sqmm Through GI pipe medium duty for laying of cable below road drain crossing etc 100mm dia cable make Havells/ KEI/Finolex / Polycab complete in all respect of required of jointing Kit, Lug, gland. required completion of civil work etc.

Supply of 200W LED Flood Light Fitting with pressure die-cast aluminium housing designed to act as heat sink for efficient dissipation of heat, Constant current LED driver used is specially designed to have built-in surge voltage, open/short circuit protections having following specification. System Wattage: 200W, Luminous flux: 24,000 Lumen, Luminaire efficacy: 120 lm/W, THD (@240V AC): 10%, Built-in Surge protection: 4KV, External Surge Protection: 10KV, Ingress Protection: IP66, Mechanical impact protection: IK08 Make- PHILIPS/CROMPTON/BAJAJ/ HAVELLS/ PANASONIC or equivelent