Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 61,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_EICCL_106364_13Bid Award Id
ViewTender No
SE DKL (R and B) 18/ 2024-25Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Providing & applying of pre constructional anti-termite treatment by drilling 12mm dia holes at distance of 30cm @ junction of wall & floor about 300mm apart deep enough to reach the soil below & chemical emulsion (IMIDACHLOPRIED 30.5SC mixed with 47.5ltr water) pumped these holes to soak the soil @ 1 ltr solution of each hole as per manufactures specification & the holes should be pluged the filling materials including cost of all materials, labour,conveyance, T&P , all taxes and hire charges of machinaries as per direction of Engineer-in-charge.(make-premise-BAYER,Paxton-FMC,ozie-KALYANI)
59.93
104
6262.69
... More
Cement concrete of proportion (1:3:6) in foundation and floors using 4cm size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6") thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties of all materials with all labour and T&P required for the work etc. complete in all respect and as per the direction of the Engineer-in-charge.
37.39
6143
229709.2
... More
Cement concrete of proportion (1:2:4) in foundation and floors using 4cm size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6") thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties of all materials with all labour and T&P required for the work etc. complete in all respect and as per the direction of the Engineer-in-charge.
6.41
7817
50110.82
... More
First class Fly ash Brick masonry using bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.
34.28
5643
193452.32
... More
Fly Ash. brick masonry of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with approved grade cement and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge
57.27
5681
325390.96
... More
Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.
-
-
-
... More
a) Footing
31.39
7165
224912.49
... More
b) Column up to plinth
5.23
16308
85291.36
... More
e) Plinth Beam
7.04
8031
56541.06
... More
f) Column above plinth
8.91
16308
145305.17
... More
g) Lintel/Coping at top of compound wall
2.9
14778
42856.78
... More
h) Chajja
1.62
1261
2044.28
... More
i) Roof Beam
3.15
16308
51370.52
... More
j) Slab
8.09
14343
116041.34
... More
i) Tie Beam/Roof Beam
2.64
16308
43053.38
... More
i) Tie Beam/Plinth Beam
6.32
8031
50758.45
... More
Cutting, straightening coiled or bent up M.S. Rod or tor steel of SAIL/ TATA / RINL (VIZAG) make including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Linear measurement will be taken and quantity will be calculated basing on the standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including weight of binding wire will not be considered for measurement) etc. complete as per specification & direction of Engineer-in-charge.
94.76
8700
824497.28
... More
Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
279.89
194
54438.6
... More
Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
259.86
278
72448.97
... More
Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
117.16
214
25119.1
... More
Supplying, fitting & fixing of Kota Tiles of minimum 16 mm thick Above 0.10 Sqm on 20mm thick bed of cement mortar (1:4) (1 cement : 4 course sand) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge.
27.26
1295
35312.6
... More
Supplying, fitting & fixing of Kota Tiles of minimum 16mm thick and above 0.10 sqm of approved make in dadoes laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete incl. rubbing as per direction of the Engineer-in-charge
2.49
1550
3859.5
... More
Providing Vitrified tile flooring using vitrified tiles having thickness of min 10mm conforming to IS 13755 of 600x600 (homogeneous) of premium quality (JOHNSON / SOMANY/ KAJARIA/ RAK) in floors, treads on steps and landings on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shades of the vitrified tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour,Labour cess , sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge.
17.28
1201
20768.83
... More
Supplying, fitting & fixing of 8-10 mm thick and size of 600x600 mm (Homogenous) vertified wall tile of in dadoes, skirting and risers of steps of laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge.
2.52
1334
3361.68
... More
Supplying, installation of pressed steel door of specific dimension and accessories such as hinges ,door stopper,tower bolt,door handle,door closer,dead lock,consedaled flush bolt,shaft lock,martise lock and vision panel etc. complete as mentioned along with warranty coverrage and after sales service etc inclusive of all cost ,taxes ,Gst,cost of delivery charges,fixing ,fitting and any other invidential charges etc.complete. (size-1.2 x 2.1 mt)
2.52
6500
16380
... More
Supplying, installation of pressed steel window of specific dimension and accessories such as hinges ,door stopper,tower bolt,door handle,door closer,dead lock,consedaled flush bolt,shaft lock,martise lock and vision panel etc. complete as mentioned along with warranty coverrage and after sales service etc inclusive of all cost ,taxes ,Gst,cost of delivery charges,fixing ,fitting and any other invidential charges etc.complete. (size-1.2 x 2.1 mt)
6.44
6500
41860
... More
Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar/ flat including stair case hand railing with 40mm. dia G.I.pipe etc. including painting two coats over a coat of redoxide primer as per approved drawing and design with cost of all materials & labour, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge.
869.63
64
56004.17
... More
Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in-charge.
(Make: Asian/ Berger/ Dulex/ ICI or equivalent make duly approved by Engineer-in-Charge)
656.9
81
53405.97
... More
Wall painting two coats with Antifungal weather coat paint (1st quality) exterior grade of approved make & approved shade over a coat of primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge.
(Make: Asian/ Berger/ Dulux/ ICI or equivalent make duly approved by Engineer-in-Charge)
506.74
99
50471.3
... More
Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make (JK White/ Birla white or equivalent make duly approved by Engineer-in-Charge) and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.
96.19
83
8070.34
... More
Painting two coats with plastic emulsion paint with a approved quality primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge.
Engineer-in-charge.
(Make: Asian/ Berger/ Dulux/ ICI or equivalent make duly approved by Engineer-in-charge)
150.16
107
16157.22
... More
Painting two coat with approved synthetic enamel paint to new iron work including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.
(Make-Asian/ Berger/ Dulux/ ICI or equivalent make duly approved by Engineer-in-charge).
104.3
185
19378.94
... More
Painting two coat with approved synthetic enamel paint to new concrete surface including cost of labour & T&P required for the work etc. complete as per direction of the Engineer-in-charge.
200
82
16542
... More
Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.
64.68
392
25361.03
... More
2.5cm thick A.S. flooring with cement concrete of proportion (1:2:4) using 12 mm size black hard crusher broken granite chips laid over 4” thick dry rammed brick khoa in ground floor and after chipping and chiseling the top of floor slabs in upper floors laid to proper slope including rounding of corners watering and curing with cost, conveyance, royalties of all materials and cost of all labour with T & P required for the work etc. complete as per direction of Engineer – in – Charge.
78
409
31962.06
... More
Waterproofing application:- Providing and application of two component polymer modified flexible cementitious waterproofing coating at a thickness of 1.5 -2.5 mm The membrane should have Elongation equal or more than: 30% Crack Bridging ability : Up to 1 mm
Adhesive strength: 1.0 N/mm² @ 28d
Tensile elongation: 60% @ 20°C
Shore A Hardness 85 (between 3 - 7 days)
etc. as per direction of E.I.C (For longer span, in terrace panel of 4m*4m should be done by groove cutting, and filling with PU Sealant)
(Make-Myk, Fosroc, Sika)
64.68
490
31693.2
... More
Iron work wrought & put up trusses including cost of all labour, material, lead etc complete as per direction of Engineer-in charge.
1128
131
148117.68
... More
Providing,fitting and fixing Dura sine colour coated 0.45mm Tata brand in roof .Drilling holes in windties including fixing of Ridges,Valleys and windties including cost of sheets,labour etc.complete.
149.65
731
109418.09
... More
Providing and laying Granular Sub-base with Grading-VI stone screening materials as per Table 400-1 as per approved drawing and technical specifications complete in all respect as per Section 900 and Clause 401 of MoRT&H Specifications for Road & Bridge works (5th Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge.
105
1995
209496
... More
Supplying and fixing of 80 mm thick cement concrete interlocking paver block of M-40 grade of approved make,desigh,colour, and size made by Block making machine with proper compaction Laid in required pattern etc. including cost conveyance taxes of all materials all labour T&P etc. complete as directed by the Engineer in charge
525
608
319410
... More
Supplying and fixing of pre cast kerb stone of size 600 mm x 300 mm x 150mm of M30 grade of approved make.design colour and size made by block making machine with proper compaction fixed in requied pattern etc.complete in all respect conforming to IS 5758:1984
500
249
124775
... More
Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area.
2280
2
6156
... More
Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2 etc. complete as per direction of Engineer-in-Charge.
1368
203
278620.56
... More
Electricals:- Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 6Amp, 250V Modular switch ISI marked and ceiling rose ISI marked mounted on metal box having front Modular cover of suitable size, metal box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection.(Make of wire-Anchor/Havells/Finolex ) (Make of switch - Legrand /Roma) Light Point Group-A
8
548
4384
... More
-do- light point Group-B
7
840
5880
... More
-do- light point Group-C
5
1212
6060
... More
-do- Fan point Group-B
2
840
1680
... More
-do- Exhaust Fan point Group-C
2
1212
2424
... More
Point wiring to 5A /6Amp socket outlet with 2 X 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20mm dia non-metallic PVC flexible conduit with Modular type switch, Phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 X 1.5sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required (Make of wire -Finolex/ Anchor/ Havells/V-Guard) ( Make of switch - Roma /Legrand ) Separate point
3
547
1641
... More
S/F of 5 Amp plug with switch on existing board (Modular Type )(Roma/Legrand)
5
196
980
... More
Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6Amp & 16Amp socket outlet and 16Amp Modular switches connection (Make- Legrand /Roma)
2
683
1366
... More
Recessed wiring to submain of the following FR PVC insulated single core multistrand copper conductor of ISI Marked confirming to IS-694/1990 in 20mm dia nonmetalic heavy duty flexible conduct 1.6 sqmm thick along with following sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge (Havells/Finolex/Anchor.) 2x1.5 sqmm +1x1.5 sqmm 1100 Volts confirming to IS 694/1990
150
157
23550
... More
2x2.5 sqmm +1x1.5 sqmm 1100 Volts confirming to IS 694/1990
180
171
30780
... More
2x4 sq mm+1x1.5 sqmm 1100 Volts confirming to IS 694/1990
80
188
15040
... More
2x6 sq mm+1x2.5 sqmm 1100 Volts confirming to IS 694/1990 in 25 mm dia non-metalic heavy duty flexible conduit
39
219
8541
... More
For Inverter wiring 1 X 1.5sqmm
80
59
4720
... More
Supply and fixing of Computer Board consisting 3 nos. of 5 pin 6 amp and 1 no 6 pin 16 A modular socket and one way modular switch, on Modular G.I. Box with Modular Base and cover.
1
1942
1942
... More
Supplying,fixing of 1X16A Plug on the separate board with complete fitting by 01 no of 16Aswitch & socket(modular type) including supplying of all required accessories A.C Point ( Make -Legrand /Roma )
1
1078
1078
... More
Supplying and installation of AC starter Modular type, Schneider/Siemens/Legrand coil voltage-415 Volt A.C. & O/L range of 9-14A range on mod Box of suitable size including modular coveras required
1
626
626
... More
Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required 4 WAY,DOUBLE DOOR
1
1257
1257
... More
8 WAY,DOUBLE DOOR
1
1689
1689
... More
Providing and fixing of following capacity DP MCB switch unit inside the existing mcb distribution box including drilling holes in the box making connections, etc as required ( MAKE-Legrand/Seimens/schneider/L & T) 63/40Amp DP MCB
2
1272
2544
... More
supply and fixing of 5 to 32 amp rating 240 volt c series miniature circuit breaker suitable for lighting and other loads of the following poles in the existing MCB DB ISI marked complete with comnnections testing and commisioning as required .( MAKE-Legrand/Seimens/schneider/L & T) Single pole
8
277
2216
... More
Supply ,installation, testing and commissioning of main switches (IS 13940 part-3/1993) of following capacity on existing surface / wall mounting and completer with HRC fuse links, interconnections, earthing , etc as required as per direction of Engineer-in-charge. (Make-Seimens/ HPL/ Anchor/ L&T/Havells/C&S/RK) 63Amp ICDP main switches with MS board
1
2417
2417
... More
S/F of Bakelite Angle holder/Batten Holder of ISI marked in place of ceiling Rose complete in all respect as per direction of Engineer in charge (Make : Cona / Anchor / Havells).
6
75
450
... More
S/F of 1x18 watt T5 fitting with all acessories in complete (Havells/Philips/Crompton ) in direction of Engineer in charge
12
762
9144
... More
S/F of 45watt LED Street Light New generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaire with high power LEDs as light source and electronic drive including G.I bracket ,M.S clamp ,Anchor fastner with all acccessories and connection.(Make:Philips/Havells/Crompton/ Panasonic or eq. model)
4
6596
26384
... More
Supplying, installation, of exhaust fan of heavy duty 300 mm sweep (Make-Havells/Crompton/Usha/Orient/Bajaj ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years.
2
3130
6260
... More
S/F of A.C Ceiling fan 48" size. (Make-Polycab Vital /crompton decora/ Crompton jura/Polar winpro.)
3
2699
8097
... More
S/F of step type Modular Fan Regulator with all connection complete in all respect as per direction of Engineer in charge(Make-Roma/Legrand)
3
329
987
... More
S/F of Standard Earthing with medium class 40mm 3Mtr. Long ISI marked GI Earth pipe including accessories such as funnel GI nut, Bolt, washer , hinged cover plate with looking arrangement, 40mm to 20GI rediusor 5nos 20mm dia holes on GI pipe required charpol salt, Excavation of earth brick work in cement mortar complete in all respect as per specification of SR 2011 and as per Direction of Engineer-in -Chage.
2
2446
4892
... More
proving and fixing of 8 SWG(4mm) dia copper wire on surface or in recess for loop earthing along with existing surface /reccessed conduit /submain wiring /cable as required
40
59
2360
... More
External Illumination-
Supply of 7mtr long HOT DIP galvanised Octagonal pole having 3.0mm thick, 70mm of top and 135mm bottom , inbuilt junction box having arrangement for 10 amp SP MCB & 63 AMP connector with base plate of (220x220x12 ) mm thick single arms and foundation bolt with Anchor plate complete with nut bolt ( MAKE-BAJAJ,UTKARSH,VALMONT)
6
17610
105660
... More
Providing and Construction of Electrical foundation using RCC strcuteure M-25 Grade(1:1.5:3) with PCCbed on sand filling and required excavation,labour,transportaion etc complete as per direction of in-charge.
6
7211
43266
... More
S/F of Street light of 70/72 Watt new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover including G.I bracket ,M.S clamp ,Anchor fastner with all acccessories and connection.(Make:Philips/Havells/Crompton or eq. model)
6
8309
49854
... More
S/F of coil earthing
6
175
1050
... More
S/F of 32A DP Switch(Anchor/Cona)
1
257
257
... More
Supplying & Testing of 1.1 KV grade Copper XLPE power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply. 2C X10 mm2 cable
110
168
18480
... More
Laying of cable on surface
74
119
8806
... More
Supply and laying of DURGA -GUARD WALL CORRUGATED (DWC) HDPE of size 40mm including transportation
73
151
11023
... More
S/F of Copper Plate Earthing (600x600x3mm)with running Copper Flat 25x5mm from coper plate to funel of 40mm dia GI PIPE heavy duty with including all accessories, excavation of earth and providing masonary work with cover plate having loccking arangement and and , charcoal, salt , funnel , tinned brass bolt, check nut and washer complete in all respect as per Govt. schedule of rate 2011 specification as per Direction of Engineering -in-Charge.
1
10588
10588
... More
Lightning Protection
Supply of 8 mm Aluminum Round Conductor.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn
185
149
27565
... More
Supply of Roof conductor holder for parapet- Polyamide
Conductor holder:With M8 female thread or diameter 7mm, M8
Screw to connect the conductor holder.Weather andtemperature resistant from -35 to +90 degree Celsius tested.
Conductor holder @ 1 meter distance.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn
55
51
2805
... More
Supply of Polyamide roof cable holder for flat roof:
DIN 48829 Form B1. Closed form with bottom. Filling weight
1Kg (frost-resistant concrete). Sleeve from polyethylene, black
@ 1 meter distance. Tested as per IEC 62561. Make-OBO/Dehn
10
199
1990
... More
Supply of Connector: For T cross and parallel connectors. Quick
installation using hexagonal bolt M10X30 high-grade hot dip
galvanised. Tested as per IEC 62561.(2nos/expansion piece ).Make-OBO/Dehn
12
203
2436
... More
Supply of 1 mtr vertical air terminal with mounting accessories
on the flat surface to meet the requirements of IS/IEC 62305.
Tested for Electrical , mechanical and chemical as per IEC
62561. Tested for 100kA lightning current. Make-OBO/Dehn
4
1164
4656
... More
Supply of Vertical air terminal with accessories:Providing of Air terminals
as per IS-IEC -62305 part-3 Nominal size Ø10/16 mm aluminium rod:
3 Mtr Airterminal: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) Suitable for high wind load.Tested as per IEC 62561. Make-OBO/Dehn
1
4096
4096
... More
Supply for Providing of Stand for Fang Fix system 16 kg with base and
clamp ,made up of frost resistant concrete and clamp tested
upto 100KA lightning current . Make-OBO/Dehn
1
2459
2459
... More
Supply for Providing of Stand for Fang Fix system 16 kg made up of frost resistant concrete. Make-OBO/Dehn
2
954
1908
... More
Supply of Test Joint (Folding Clamp) suitable to connect 8mm
round conductor and max by 30x3 mm GI strip as specified in
drawing and directed by Engineer.
Tested for 100kA lightning current. Make-OBO/Dehn
6
380
2280
... More
Supply of IP 66 Poly Propylene Junction Box. Installation at 1Mtr Height
For Test Joint .Internal dimensions: 100x100x48 mm Make-OBO/Dehn
6
277
1662
... More
Supply of Galvanised Steel Flat 30X3 mm thickness from earth
electrode directly in ground as required. Flat conductor Hot
Dipped Galvanized. Tested as per IEC 62561. Make-OBO/Dehn
110
270
29700
... More
Supply for Providing of Cross connector for Flat: Suitable for 30mm Galvanised steel strip. Installed with 4 nos of hexagonal plate. Tested for 100kA lightning current. Make-OBO/Dehn
10
252
2520
... More
Supply of flat conductor holder- Fit: FL 30, With mounting hole
6.2 x 22 mm, With 2 cylinder bolts M6 x 16 and over-piece from
hot-dip galvanised steel, Bottom section from polyamide, black.
Tested as per IEC 62561. Make-OBO/Dehn
10
261
2610
... More
Supply for Providing of Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric. Make-OBO/Dehn
2
879
1758
... More
Supply of UL Listed maintenance free ,Low carbon copper
coated earth rod of 3 metre electrode having diameter of 17.2
mm with copper coating thickness of 250micron tested as per
IEC 62561-2 Make-OBO/Dehn
6
4183
25098
... More
Supply of universal clamp made of SS to connect rod with flat
conductor Make-OBO/Dehn
6
887
5322
... More
Supply of Earth conductivity enhancing mineral compound shall be of 25
kg/pit tested as per IEC 62561-7,TCLP tested Make-OBO/Dehn
6
2838
17028
... More
Supply of The above arrangements shall be provided with Heavy duty
earth champer of 5000kg load bearing capacity to ensure the safety of earthing system Make-OBO/Dehn
6
2169
13014
... More
Installation of The above arrangements including all accessories as per Direction of Engg. In charge.
1
9220
9220
... More
P.H:- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge
-
-
-
... More
20mm dia C - PVC pipe
15
303
4545
... More
25mm dia C - PVC pipe
20
404
8090
... More
32mm dia C - PVC pipe
20
581
11634
... More
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
... More
15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)
4
861
3445.2
... More
15 mm dia CP S.B. Bib cock(CON-CHR-037KN)
2
1082
2165.6
... More
15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make)
2
1451
2903.8
... More
20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make)
2
1132
2264
... More
25mm dia brass full way valve (Shakti make)
2
1212
2424.4
... More
32mm dia brass full way valve (Shakti make)
2
1774
3549.2
... More
15mm CP Extension piece
10
52
526
... More
125mm CP grating
4
87
348.8
... More
15mm size C.P. flange
10
77
774
... More
Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge
-
-
-
... More
2000 liters capacity PVC water storage tank
2
45600
91200
... More
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.
4
63
254
... More
Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge
2
215
431
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
20
239
4786
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
... More
110mm U-PVC SWR Pipe (Supreme /Ashirvad)
20
515
10302
... More
110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)
4
497
1989.2
... More
110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
4
293
1174.4
... More
110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
4
232
928
... More
110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
4
407
1629.6
... More
110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
2
58
116.4
... More
110mm U-PVC HR Bend(Ori Plast/Finolex/Supreme Make)
1
407
407.4
... More
110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make)
2
457
914.2
... More
110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
4
322
1290.8
... More
110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make)
2
551
1102.4
... More
110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make)
4
386
1544
... More
110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
5
160
800.5
... More
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
... More
580mm size Orissa pan (Hindware/Parryware/Neycer make)
2
3877
7755
... More
Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
-
-
-
... More
10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
2
2368
4736
... More
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
-
-
-
... More
550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal
2
6176
12353.4
... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
25mmx600mm long CP towel rail
2
901
1803.6
... More
Towel ring
2
648
1297.8
... More
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.
-
-
-
... More
600mmx125mm plate glass shelf with CP/NP guard rails.
2
695
1391.2
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
-
-
-
... More
600mmx450mm size B.E mirror (swivelled type)
2
804
1609.6
... More
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
CP soap holder
2
280
560.2
... More
Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.
-
-
-
... More
½” x 5” CP Shower (Plaza Deluxe Make)
2
530
1061.2
... More
Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
4
239
958
... More
Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
2
149
298.4
... More
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge
-
-
-
... More
Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
1
11434
11434.7
... More
Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge
1
1877
1877.5
... More
Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site.
1.64
1425
2335.13
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
1.09
6393
6981.27
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
1.09
8453
9214.53
... More
Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size Kajaria/Somany/Johnson tile 30cmx30cm special printed series to be pre-approved by the Engineer-in-charge )
-
-
-
... More
Kajaria/Somany/Johnson tile 30cmx30cm
10.92
932
10185.08
... More
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
39.27
215
8454.83
... More
Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size Kajaria/Somany/Johnson tile 45cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge )
-
-
-
... More
Kajaria/Somany/Johnson tile 45cmx30cm
39.27
931
36572.15
... More
Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.
3.19
3430
10950.48
... More
Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge
9.92
1114
11053.86
... More
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 80 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 80 liter's along with 2 noa of faucets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge
-
-
-
... More
Aqua guard pure Chill 80 PSS UV
1
112242
112242
... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge
-
-
-
... More
100mm dia P.V.C. pipe
10
1448
14483
... More
Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
1
26062
26062.8
... More
1 no 50 Users Septic Tank
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.
36.67
293
10745.78
... More
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft.
29.29
314
9213.76
... More
Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.
38.29
162
6233.61
... More
Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge
4
1425
5702.4
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 40mm size crusher broken hard black granite metal including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
4.26
6822
29061.72
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
5
8453
42268.5
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.
1.52
9251
14062.13
... More
Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
1.22
9128
11137.26
... More
Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge
-
-
-
... More
RCC floor, roof slab chhaja up to 4.430 m height
12.34
755
9316.7
... More
Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge.
22.86
6311
144271.75
... More
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
85.85
227
19513.71
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge
41.62
41
1731.39
... More
Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification.
8
297
2380.8
... More
Supplying all materials, labour T&P for providing fitting & fixing 150mm x 150mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge.
2
715
1430.2
... More
Construction of 1nos production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories
-
-
-
... More
Drilling of 200mm dia bore
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
-
-
-
... More
00 mtr to 30mtr
30
755
22664.4
... More
30 mtr to 45mtr
15
836
12544.2
... More
Drilling of 150mm dia bore
-
-
-
... More
45 mtr to 215.00mtr
170
554
94263.3
... More
Lowering of 200mm dia P.V.C casing pipes
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
-
-
-
... More
00 mtr to 30 mtrs
30
138
4146
... More
30 mtr to 60mtr
15
138
2073
... More
Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.
-
-
-
... More
200mm dia PVC (sch-80) pipe
45
1633
73521
... More
Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)
1
789
789.8
... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
-
-
-
... More
By DTH Rig
1
4994
4994.8
... More
Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation:
-
-
-
... More
Rocky terrain with boulder formation for 300m depth
2
1122
2244.22
... More
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make)
-
-
-
... More
1 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby)
1
16737
16737.2
... More
DOL Control panel
1
3805
3805.5
... More
40mm dia steel short piece
1
152
152.3
... More
Well cap
1
152
152.3
... More
50mm size CI bracket
1
91
91.3
... More
2.50sqmm flat cable
120
128
15420
... More
20mm dia rigid UPVC pipes
30
6
207
... More
Steel rope with cover
30
26
801
... More
Labour charges for lowering including transportation
1
2000
2000
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge
-
-
-
... More
32mm HDPE pipes (Finolex/Supreme make)
90
99
8982
... More
Approved for 137 ( One Hundred Thirty Seven) items only
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements