Works Department Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Works Department - EICCL Tender
Eprocure
Opening Date3 Oct 2020
Closing Date16 Oct 2020
Tender Amount₹ 3,39,46,606
Costs
EMD
₹ 3,39,500Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_EICCL_62970_1Bid Award Id
ViewTender No
S.E.Ctc.(RanddB)10/2020-21Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Back filling with available excavated earth (excluding rock) in trenches plinth sides of foundation etc. layeers not exceeding 20 cm in depth etc complete incluing cost, conveyane, cost of all materials and labour etc complete as per direction and specification of Engineer in charge
1.07
-
133.5
... More
Disposal of surplus excavated materials by mechanical means from the work site within 5 km. awaywith cost, conveyance, taxes as per specification and direction of Engineer in charge.
57.13
-
151.17
... More
Cement concrete (1:3:6) in foundation and plinth using 4cm(1½”) size hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete watering, curing etc, complete to required levels laid in layers to required thickness including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge
100.61
-
4598.3
... More
RCC work of M-25 Grade with 20mm and down graded size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts including frame works including cost, conveyance, cost of all labour, T&P, cost of all materials etc. complete as per direction and specification of Engineer-in-charge. Foundation and plinth
403.13
-
5311.2
... More
Column, Beam GF
71.33
-
10879.6
... More
1st floor
58.98
-
12103.5
... More
2nd floor
58.98
-
13568.7
... More
3rd floor
55.3
-
15322.4
... More
Terrace floor
14.31
-
17421.2
... More
Plinth Beam GF
38.82
-
5661.2
... More
Base slab GF
0.79
-
5311.2
... More
RCC Wall GF
11.13
-
8218.7
... More
1st floor
5.52
-
8910.9
... More
2nd floor
5.52
-
9737.8
... More
3rd floor
5.52
-
10725.1
... More
Roof slab GF
51.08
-
9359.2
... More
1st floor
51.08
-
10279.1
... More
2nd floor
51.08
-
11379.8
... More
3rd floor
51.08
-
12695.6
... More
Terrace floor
13.03
-
14268.4
... More
Stair case GF
2.39
-
10405.8
... More
1st floor
2.39
-
11535.5
... More
2nd floor
2.39
-
12886.7
... More
3rd floor
2.39
-
14504.6
... More
Lintel, Sill GF
2.97
-
8778.9
... More
1st floor
9.7
-
9583.2
... More
2nd floor
9.7
-
10544.4
... More
3rd floor
9.7
-
11692.6
... More
Terrace floor
2.36
-
13065.6
... More
Chajja FF
11.85
-
894.8
... More
2nd floor
11.85
-
1011.7
... More
3rd floor
11.85
-
1151.6
... More
Terrace floor
6.03
-
1319.1
... More
Fins FF
29
-
1860.7
... More
2nd floor
58
-
2161.3
... More
3rd floor
58
-
2521.5
... More
Terrace floor
17.4
-
2953.3
... More
Platform slab, Shelves FF
13.3
-
1204
... More
2nd floor
13.3
-
1409.1
... More
3rd floor
13.3
-
1654.9
... More
Cutting, straightening coiled or bent up M.S. Rod or tor steel using SAIL/RINL/TATA/JINDAL STEEL/ SHYAM STEEL including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge Ground floor
888.81
-
7280.4
... More
1st floor
182.01
-
7303.3
... More
2nd floor
183.46
-
7327.3
... More
3rd floor
171.13
-
7352.5
... More
Terrace floor
43.68
-
7379
... More
Aerated Autoclaved Fly ash bricks/masonary in filler/inside walls using A.A.C blocks of size 625mm x 200mm x 200mm having compressive strength not less than 4N/mm2 conforming to IS:2185 (Part-3)-2005 and IS-6441-1972 in cement mortar of mix (1:6) and screened and washed sand for mortar for use in Superstructure including splays cutting,circular moulding,corbelling, chamfering,and similar such type of works,watering and curing etc.including cost conveyance,royalty,loading,unloading taxes of allmaterials,cost of labour,scaffolding,sudries,T&P required for the works etc. complete in respect as directed by the Engineer-in -charge
23.36
-
4551.91
... More
1st floor
71.41
-
4611.3
... More
2nd floor
71.41
-
4679.5
... More
3rd floor
66.64
-
4758.1
... More
Terrace floor
38.28
-
4848.3
... More
Providing 12mm thick cement plaster (Outside plastering) in cement mortar (1:6) in all floors finished smooth to outside surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge(Ground floor)
52.95
-
133.9
... More
1st floor
344.49
-
139.3
... More
2nd floor
344.49
-
144.8
... More
3rd floor
344.49
-
150.7
... More
Terrace floor
334.6
-
156.8
... More
Providing 12mm thick cement plaster (Inside Plastering) in cement mortar (1:6) in all floors finished smooth to outside surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge(Ground floor)
667.34
-
133.9
... More
1st floor
935.79
-
137.1
... More
2nd floor
935.79
-
140.4
... More
3rd floor
935.79
-
143.8
... More
Terrace floor
236.65
-
147.3
... More
Providing 6mm thick cement plaster.(1:4) to RCC surface finished smooth including closed deep chiping and slury treatment including watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge GF
580.7
-
149.7
... More
1st floor
493.7
-
153.5
... More
2nd floor
493.7
-
157.3
... More
3rd floor
493.7
-
161.2
... More
Terrace floor
75.26
-
165.3
... More
Priming one coat with water bound wall cement primer including sand papering, polishing the surface, cost, conveyances of materials and cost of all labour TandP etc complete as per specification and direction of Engineer in charge (Outside surface) GF
52.95
-
57.1
... More
1st floor
344.49
-
59.4
... More
2nd floor
344.49
-
61.9
... More
3rd floor
344.49
-
64.5
... More
Terrace floor
334.6
-
67.3
... More
Priming one coat with water bound wall cement primer including sand papering, polishing the surface, cost, conveyances of materials and cost of all labour TandP etc complete as per specification and direction of Engineer in charge (Inside surface) GF
1248.04
-
57.1
... More
1st floor
1429.49
-
58.5
... More
2nd floor
1429.49
-
60
... More
3rd floor
1429.49
-
61.5
... More
Terrace floor
311.91
-
63
... More
Finishing wall surface with cement based wall putty(water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges, conveyance, taxes of all materials and cost of all labour with TandP etc complete as per specification and direction of Engineer in charge GF
1248.04
-
67.3
... More
1st floor
1429.49
-
68.6
... More
2nd floor
1429.49
-
69.9
... More
3rd floor
1429.49
-
71.3
... More
Terrace floor
311.91
-
72.7
... More
Painting two coats with a coat of approved plastic emulsion paint over plaster surface including sand papering, polishing the surface, cost, conveyances of materials and cost of all labour TandP etc complete as per specification and direction of Engineer in charge GF
1248.04
-
75.7
... More
1st floor
1429.49
-
77.3
... More
2nd floor
1429.49
-
78.8
... More
3rd floor
1429.49
-
80.5
... More
Terrace floor
311.91
-
82.1
... More
Painting two coats with anti-fungal resistance Weather Seal Coat of approved shade over plaster surface upto any height by means of brush to outside surface of walls after cleaning the surface including watering, curring etc. complete in all floors including cost, conveyance, taxes of all materials, labours sundries T&P required for the work as per specification and direction of Engineer in charge GF
52.95
-
69.5
... More
1st floor
344.49
-
72
... More
2nd floor
344.49
-
74.7
... More
3rd floor
344.49
-
77.5
... More
Terrace floor
334.6
-
80.5
... More
Providing fitting and fixing of Vitrified tiles of size (600mmx600mm) having in floors of approved make over 20mm thick bed of cement mortar(1:4) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge 1st floor
295.56
-
942.1
... More
2nd floor
295.56
-
952.1
... More
3rd floor
295.56
-
962.5
... More
Providing fitting and fixing of Granite tiles of 20mm thick in above 0.4 sqm. area of approved make over 20mm thick bed of cement mortar(1:4) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge GF
62.09
-
2194.6
... More
1st floor
62.09
-
2204.1
... More
2nd floor
62.09
-
2214
... More
3rd floor
62.09
-
2224.5
... More
Terrace floor
13.15
-
2235.5
... More
Providing fitting and fixing of Granite tiles in above 0.1 to 0.4 sqm. area in dadoos and skirting of approved make over 12mm thick bed of cement mortar(1:3) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge GF
34.83
-
1902.6
... More
1st floor
31.59
-
1932
... More
2nd floor
31.59
-
1962.9
... More
3rd floor
31.59
-
1995.4
... More
Terrace floor
0.93
-
2029.5
... More
Providing fitting and fixing of Vitrified tiles (600mmx600mm) size in dadoos and skirting of approved make over 12mm thick bed of cement mortar(1:3) jointed with neat cement slurry mixed with pigment to match the sades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge 1st floor
47.67
-
1045.8
... More
2nd floor
47.67
-
1060.8
... More
3rd floor
47.67
-
1076.5
... More
Providing fitting and fixing of Kota stone 16mm thick in above to 0.1 sqm. area of approved make over 20mm thick bed of cement mortar(1:4) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge GF
6.44
-
951.5
... More
Providing fitting and fixing of Kota stone in dadoos and skirting of approved make over 12mm thick bed of cement mortar(1:3) jointed with neat cement slurry mixed with pigment to match the sades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge GF
1.53
-
1134.3
... More
Providing fitting and fixing of Chequered tile of approved make over 20mm thick bed of cement mortar(1:4) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge GF
323.5
-
472.9
... More
Providing 2.5cm thick grading concrete of prop.(1:2:2) using 6mm size H.G. chips of approved quality & from approved quarry including watering, curing with cost, conveyances, taxes of all materials, cost of all labour, T&P required for the work etc. complete as per direction of Engineer-in-charge 3rd floor
382
-
380.3
... More
Terrace floor
70
-
421.3
... More
Supplying, fitting & fixing in all floors of M.S.grills and gates, with top rails, steel windows, critical frames for windows balustrades of stair case and parapet railing made out of M.S.square bar/flat as per approved drawing and design including making holes in walls and RCC structure, wood work etc and making good to the damages to walls with cement concrete(1:2:4) with hard crusher broken granite stone chips of 12mm to 20mm size(20mm size not to exceed 25%) of approved quality with cost of all materials labour, cost of welding all T&P, sundreis etc complete in all respect as per specification and direction of Engineer in charge(screws and other hardward required materials to be used in the work shall be of approved quality and specification and shall have to be supplied by the contractor at his own cost
3746.79
-
58.1
... More
Painting two coats with a coat of approved synthetic enamel paint over a coat of primer to steel work including sand papering, polishing the surface, cost, conveyances of materials and cost of all labour TandP etc complete as per specification and direction of Engineer in charge GF
13.28
-
184.1
... More
1st floor
18.54
-
188.9
... More
2nd floor
18.54
-
193.9
... More
3rd floor
18.54
-
199
... More
Terrace floor
17.42
-
204.2
... More
Supplying and Proviiding of 32mm thick flush door shutters made out of 30mm thick solid core type Block Board as per IS-2202 with 1mm thick approved laminated and 5mm thick vision panel of 6"x9" with teak wood beading and door closure with cost of materials and labour etc complete as per specification and direction of Engineer in charge
132.3
-
3822.7
... More
Providing, Fitting & Fixing of Stainless steel of 304 grade in handrailing of 50mm dia of 2mm thick circular pipe with balustrade of size 32mmX32mm X2mm @ 0.90mtr. C/C and stainless square pipes bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance of Materials, Labour, TandP etc required for the complete in all respect and as per specification & direction of Engineer-in-charge
1632.48
-
266.6
... More
INTERNAL ELECTRIFICATION
Sub-Head I (modular Wiring Items)
Surface/Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor of ISI marked with 20 mm dia PVC flexible non metallic conduit with 6A modular type switch ISI marked , and ceiling rose ISI marked of modular type G.I box with cover , of suitable size, modular box with 1.5 sq. Mm FR PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. GROUP-A(QTRS)
133
-
616
... More
GROUP-B(QTRS)
60
-
835
... More
GROUP-C(COMMON ARAE)
22
-
1112
... More
Group control of point in Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor of ISI marked with 20 mm dia PVC flexible non metallic conduit with 6A modular type switch ISI marked and ceiling rose ISI marked of modular type G.I box with cover of suitable size, modular box with 1.5 sq. Mm FR PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge..(Maximum 02 nos point in one circuit)
4
-
517
... More
Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge.
50
-
174
... More
Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type) with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.
72
-
365
... More
Receass wiring for circuit/submain wiring with the following mentioned size PVC insulated, copper conductor, single core cable or any other equivallent reputed make ISI marked as approved, in recessed PVC conduit Heavy duty of mentioned size or any other equivallent reputed make ISI marked as approved) as required as per direction of Engg.-in-Charge.
2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty flexible conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)
255
-
133
... More
2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR) (2X2.5+1X1.5)
433
-
153
... More
4 nos single core 2.5 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor .in 25 mm dia non metallic heavy duty flexible conduit(LDB to LSB/5A SOCKET) (4X2.5+2X1.5)
121
-
240
... More
2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit . (2X4+1X2.5)
111
-
175
... More
4 nos single core 4 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty flexible conduit.(PDB to PSB/GAYSER. POINT/AC POINT) (4X4+2X2.5)
48
-
282
... More
2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty flexible conduit .(PANEL TO BDB EACH QTR) (2X6+1X2.5)
88
-
212
... More
4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty flexible conduit.(PANEL TO BDB EACH QTR) (4X6+2X4)
48
-
334
... More
Supplying and fixing 5/6A modular switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required as per direction of Engg.-in-Charge.. . of
12
-
101
... More
Supplying and fixing 3 pin 5/6A modular socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required as per direction of Engg.-in-Charge.
12
-
107
... More
Supplying and fixing 15/16A modular switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required as per direction of Engg.-in-Charge.
24
-
145
... More
Supplying and fixing 15/16A modular socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required as per direction of Engg.-in-Charge
24
-
191
... More
Supplying and fixing 32 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. make for Split ac.
12
-
601.96
... More
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required as per direction of Engg.-in-Charge.4 moudle(125mmx75mm)
15
-
260
... More
1 moudle(75mmx75mm)
15
-
213
... More
12 moudle(200mmx150mm)
12
-
475
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .40 MM
25
-
107.06
... More
50 MM
25
-
110.09
... More
Supply and fixing modular type indicator on the existing switch box/cover of Anchor make as required as per direction of Engg.-in-Charge.
24
-
102
... More
Supplying and installation of AC starter Modular type or any other equivalent reputed make as approved coil voltage-415 Volt A.C. & O/L range of suitable range range on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge .
12
-
612
... More
Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover.as required as per direction of Engg.-in-Charge
12
-
243
... More
Supplying and fixing 5/6A flush switch on the existing switch box including connections but excluding box etc. as required as per direction of Engg.-in-Charge.(COMMON AREA)
6
-
38.38
... More
Supplying and fixing 5/6A flush socket on the existing switch box including connections but excluding box etc. as required as per direction of Engg.-in-Charge.
6
-
48.48
... More
Supplying and fixing step regulator on the existing switch box including connections but excluding box etc. as required as per direction of Engg.-in-Charge.
48
-
218
... More
Sub-Head II (Light fitting Fixture & Fan)
Supplying, installation, of exhaust fan of heavy duty 300 mm sweep with louvers any other equivalent reputed make star rated as approved) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge.
36
-
2221
... More
Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan of or any other equivalent reputed make star rated as approved including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge .(With out fan Regulator)
48
-
2146
... More
SITC of energy efficient LED tube light fittings with decorative batten and LED tube light having power rating not more than 20 watt and lumen output not less than 1800 lumen complete with electronic driver and all other accessories with diffuser i/c connection etc as required. (Similar to
100
-
530
... More
SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
( Make :Make: Lighting Technology /wipro/PHILIPS/BajajHavells make)
12
-
326
... More
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge .
(Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.
48
-
45
... More
TELEPHONE Supplying and drawing Telephone WIRE protected with PVC sheath in the with surface/ recessed steel/ PVC conduit as required as per direction of Engg.-in-Charge.
120
-
45
... More
Supplying and telephone socket socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required as per direction of Engg.-in-Charge.
12
-
550
... More
Supply, Delivery, Installation & Testing of 24 port PoE Giga 10/100/1000 switche as per direction of Engr.-in-charge.ORDINARY TYPE
1
-
10000
... More
Supplying & Commissioning of IP Telephone Hand Set as per direction of Engg.-in-Charge.
12
-
1200
... More
BDBS,DB,AC DB,FLOOR PANELS,MCBS
Supplying and fixing of following mentioned way, three pole/single pole and neutral, 1.6 mm thickness sheet steel,double door MCB distribution board, 415 volts/240 volts, on surface/recess, complete with terminal blocks, duly prewired with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. , or any other equivallent A catagories reputed make ISI marked as approved as per direction of Engg.-in-Charge.16 way SPN DB (Double door)(ALL qtr power)
12
-
2109.89
... More
Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of make or any other equivallent A catagories reputed make ISI marked as approved in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.
168
-
129.28
... More
Supplying and fixing 63Amps DP 240 volts, RCCB,300mA any other reputad equevallent A catagories make ISI marked as approved in the existing MCB DB complete with connections.
12
-
2214.9
... More
(Earthing) INSTALLATION
S/IT/C Of Earthing with GI earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-Charge.
2
-
4691
... More
Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge.
55
-
94.94
... More
Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.(DOUBLE RUN TO MAIN PANEL & APFC PANEL ,AC PANEL)
12
-
537.32
... More
Providing and fixing 25mm x 5 mm GI strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
24
-
124.23
... More
CABLING AND END TERMINATION MAIN AREA
Supplying of one number PVC insulated armoured and PVC sheathed AL. conductor power cable of 1.1 KV grade of following size cables as per direction of Engg.-in-Charge.3.5core x 240 sq mm (CONTROL ROOM TO MAIN PANEL DOUBLE RUN AS SPARE)
120
-
1104.6
... More
LAYING OF CABLE
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 120 SQ. MM but not exceeding 400 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
98
-
179
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
5
-
53
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM in open duct 400 SQ. MM OPEN DUCT etc as required as per direction of Engg.-in -charge.
5
-
42
... More
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 400 SQ. MM From 120 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
12
-
136
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge. 3.5 core x240 sq mm
4
-
1000
... More
Providing,fixing and laying of fallowing dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.50 mm dia
5
-
406
... More
80 mm dia
5
-
470
... More
150 MM dia
2
-
645
... More
Providing,fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. 150 mm dia
2
-
938
... More
CABLE TRAY /RACE WAY FOR DISTRIBUTION OF POWER
MAIN METERING PANEL
S/I/T&Commissioning of LT indoor floor mounted cubical type METERING electrical main panel (for QTR) made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing as per direction of Engg.-in-Charge.In commer- 01 number of 250 Amps(100-250A) 4P MCCB with encapsulated double break .(Icu=100%Ics)with shunt trip.with axulary .Busbar- 04 numbers of 300Amps Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator.Out going- (i) 63A 2P MCB 14 nos with space for 15 nos 10-40A 1PH KWH Meter digital type for each quarter & STLIT AREA. Out going- (ii) 32A 2P MCB 01 no with space for 1 no 10-40A 1PH KWH Meter digital type for common area.Instrument- (i) 03 numbers phase indicating lamp with HRC fuse. (ii) 01 set of digital type multifunction meter with CT for voltage,current,frequency,PF,THD indication
1
-
102134
... More
CABLE TRAY /RACE WAY FOR DISTRIBUTION OF POWER
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x 200mm(W), of reputed make ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge.
16
-
595
... More
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x 300mm(W), of ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge.
4
-
788
... More
PASSENGER LIFT WITH WIRRING
Design Supply, Installation, Testing & Commissioning and putting into operation with compelete inspection by concerned electrical inspector, Director Factory and Boilers, Odisha with proper testing certificate and final testing of Automatic Lift compelte with all standard equipments accessories and control equipments as per Manufacturer's Design and as per CPWD /OPWD specification (Part - III Lifts) 1981 with valid lisence for installation and fulfilling following requirements on turnkey basis as per direction of Engg.-in-Charge. HOSPITAL LIFT(INCLUDING STRUCTURE)PASSENGER LIFTLoad: 1 0 PASSENGER(390KG) Speed: 1.5 Meter Per Second.Control: Variable voltage with variable frequencyOperation: Microsprocessor based simplex collective selective with / without Lift Attendant.Total Rise: About 15 Meters.Landings: For All on same side. Floors Served: S, 1,2,3,TERRACESignals: Digital Car Position Indicator, Car Travel direction Indicator in Car & at all Landings.Lift Shaft Size: About as 6 passenger lift standard, finished with Plaster.Lift Car Size: About 6 PASSENGER lift standard. Car Entrance: Clear Opening 10 passenger lift standard high Protected with Car Door.Landing Entrance: Clear Opening hospital lift standard high Protected with Landing Door. Car Door: Stainless with front glass to transparent Two Panel Center opening flush type.outer visible. Landing Door: Mild Steel Two Panel Center opening flush type P. Door Operation: Automatic Electric Power operated Door with in infrared protection. Car Interior: Stainless Steel Panel with Hair line finish on all sides. Car Floor: Hard Wood covered with PVC / Marblex Tiles.Car Ceiling & Lighting: Fluorescent Lighting Concealed by suspended false ceiling with plain acrylic diffiuser. The frame of suspended false ceiling shall be of powder coated Aluminum. Car Ventilation: Pressure Fan with anodized Aluminum Grill.Emergencing Lighting in Car: Battery operated Emergencing Lighting in the Lift Car.Intercom System: Battery operated intercom system in Lift Car, Machine Room and Control Room. Emergencing Alarm: Battery operated Alarm Bell System in Lift Car and Control Room.Position of Machine Room: Directly above the Lift Shaft.Electric Power Supply: AC 415 Volt 3 Phase 50 Hz terminated in Machine Room.OTHER SPECIAL PROVISIONS• VVVF CONTROLLER AUTOMATICE RESCUE DEVICE (ARD)EMERGENCY LIGHT AND BATARY OPERATED ALARAM BELL DOT MATRICKX SEVEN SIGMENT DIGITAL POSITION INDICATORS FIRE RATED DOOR FOR 1 HOUR 3 WAY INTER COM/PRESS AND SPEAK BUTTON WITH HAND SET FLOOR ANNUNCIATOR WITH MUSIC INFRA RED SCREEN OVER LOAD WARNING INDICATOR BRAILLE BUTTONS FREE SERVICE FOR 2 YEARS PIT LADER FULL CAR HEIGH CAR FIXTURE ARRIVAL CHIME PROVISION FOR CC CEMARA WITH INSTRUEMENT Fire Man Switch: Fire Man Switch at Main Landing Terminal.
1
-
1024500
... More
INSTALLATION OF ADVANCED LIGHTENING PROTECTION SYSTEM
OPR EARLY STREAMER EMISSION (ESE) ADVANCE LIGHTNING PROTECTION SYSTEM 63 METER PROTECTION RADIUS IN LEVEL-1 COMPLIES WITH NFC-17-102 STANDARDS . . (MODEL-OPR-45)
1
-
95250
... More
MAST FOR MOUNTING THE TERMINAL & ADAPTOR TO MOUNT THE OPR WITH SUITABLE BASE PLATE, SHOULD HAVE PROVISION FOR GUY WIRE CLAMPING SYSTEM, TERMINATION ARRANGEMENT FOR THE DOWN-CONDUCTOR.(2+3 M MAST)2MTR MAST
1
-
4866
... More
3MTS MAST
1
-
9636
... More
PROVIDING MAINTENANCE FREE CHEMICAL EARTHING Furse COMPOUND FOR LIGHTNING ARRESTOR WITH ALL COST OF COPPER BOUNDED ROD ETC FOR EACH PIT
1
-
13938
... More
FLASH COUNTER The electrical characteristics of this product have been certified by the LCIE laboratoryTested in accordance with the NF C 17 106 Rule from 150 A to 110 kA ABB Make
1
-
24900
... More
INSTALLATION CHARGES
1
-
12500
... More
COPPER FLAT 25X5 PER MTR ABB Furse
32
-
537.32
... More
DOWNCONDUCTOR ACCESSORIES SADDLE WIRH SECEW CLAMP ETC.
1
-
6500
... More
PH Works:-Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipes conforming to pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge In Ground Floor
20mm dia C-PVC pipe (Ashirbad/Supreme)
27
-
223
... More
25mm dia C-PVC pipe (Ashirbad/Supreme)
32
-
300.9
... More
In 1st Floor 20mm dia C-PVC pipe (Ashirbad/Supreme)
41
-
230.7
... More
25mm dia C-PVC pipe (Ashirbad/Supreme)
53
-
308.6
... More
In 2nd Floor 20mm dia C-PVC pipe (Ashirbad/Supreme)
47
-
238.3
... More
25mm dia C-PVC pipe (Ashirbad/Supreme)
56
-
316.2
... More
In 2nd Floor 20mm dia C-PVC pipe (Ashirbad/Supreme)
52
-
246
... More
25mm dia C-PVC pipe (Ashirbad/Supreme)
62
-
323.9
... More
Supplying all materials, labour,T&Pand providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/04 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge In Ground Floor 25mm dia PVC ASTM Pipe
25
-
146.7
... More
50mm dia PVC ASTM Pipe
35
-
310.3
... More
In 1st Floor32mm dia PVC ASTM Pipe
30
-
198.3
... More
50mm dia PVC ASTM Pipe
30
-
321.5
... More
In 2nd Floor32mm dia PVC ASTM Pipe
35
-
205.5
... More
50mm dia PVC ASTM Pipe
30
-
323.7
... More
In 3rd Floor32mm dia PVC ASTM Pipe
35
-
212.8
... More
50mm dia PVC ASTM Pipe
30
-
343.9
... More
Terrace floor 50mm dia PVC ASTM Pipe
55
-
355.1
... More
Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.In Ground Floor
15
-
42.6
... More
In 1st Floor
15
-
43.4
... More
In 2nd Floor
20
-
44.2
... More
Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. In Ground Floor
15
-
148.8
... More
In 1st Floor
15
-
149.5
... More
In 2nd Floor
15
-
150.2
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per the direction of the Engineer in charge In Ground Floor
15
-
155.1
... More
In 1st Floor
35
-
159.5
... More
In 2nd Floor
40
-
164.3
... More
Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge 250mm to 375mm thick wall In Ground Floor
10
-
170.3
... More
In 1st Floor
15
-
170.3
... More
In 2nd Floor
15
-
170.3
... More
Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make)
12
-
1116.18
... More
15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)
25
-
690.98
... More
15mm dia CP Health faucet (Con-ALD-CHC-573 Jaquar make)
12
-
1435.1
... More
15mm dia CP extension piece
12
-
64.04
... More
15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make)
12
-
823.82
... More
125mm dia C.P.gratings.
38
-
86.29
... More
15mm C.P.revolving shower with 15mm x 225mm long CP shower arm.
24
-
512.78
... More
25mm dia brass Fullway valve
15
-
995.65
... More
32mm dia brass Fullway valve
15
-
1457.35
... More
40mm dia brass Fullway valve
15
-
1853.06
... More
50mm dia brass Fullway valve
15
-
2748.6
... More
Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge. (Make-Parry ware/ Cera/ Hindware)10 litres PVC L.L. Cistern (Slimline-white)
25
-
1404.7
... More
Supplying all materials, labour, T&P and fitting and fixing PVC hubless soil waste ventilating pipes and fittings conforming to IS: 15905 or its latest revision to walls with suitable wall clamps or laying in trenches including earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge 110mm dia PVC pipes(Supreme/Ashirvad)
52
-
591.15
... More
75mm dia PVC Hubless pipes(Supreme/Ashirvad)
35
-
383.25
... More
110mm dia PVC 'P' trap
25
-
262.5
... More
110mm dia PVC Door Tee
20
-
262.5
... More
110mm dia PVC Plain Bend
15
-
75.91
... More
110mm PVC Plain cross Tee
10
-
334.32
... More
110mm dia PVC Door Bend.
10
-
138.29
... More
75mm dia PVC Plain Bend.
6
-
75.91
... More
100mm dia Vent cowl.
4
-
157.5
... More
W/C connector
25
-
157.5
... More
S/S/GI Clamp suitable for 75mm to 110mm dia pipe
20
-
212.1
... More
Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge. (Parryware/Hindware/Cera) E.W.C. with seat cover (Parryware/Hindware/Neycer/Rak)
25
-
2422.7
... More
Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make), etc all complete as per specification and direction of the Engineer in charge 550mm x 400mm size W. H. Basin with Porcelain Pedestal (Parryware/Hindware/Neycer)
25
-
3852.4
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge Design mirror(Parryware)
25
-
1545.5
... More
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 600 x 125mm plate glass shelf with CP guard rails
25
-
587.2
... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 25mm x 600mm long CP towel rail
25
-
690.5
... More
CP towel rail Ring.
12
-
457.7
... More
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge CP soap holder
37
-
172
... More
Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with cast iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge 600x450x250 mm Porceloain sink(Hindware/Neycer)
12
-
4878.5
... More
Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge Gully trap chamber of size 250mmx250mm with R.C.C cover slab
4
-
1278.9
... More
Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Inspection chamber Inside size 760mmx760mmx460mm
6
-
7513.6
... More
Supplying all materials, labour, T&P and providing cement flush pointing to brick masonry (1:3) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In Stilt Floor
7.98
-
138.1
... More
In First Floor
65.52
-
141.6
... More
In Second Floor
65.52
-
151.2
... More
In Third Floor
65.52
-
161.2
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per direction of the Engineer in charge. In Ground Floor
1.14
-
532
... More
Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In Ground Floor
0.7
-
3838.3
... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In Ground Floor
0.17
-
5524.1
... More
In 1st Floor
0.98
-
5800
... More
In 2nd Floor
1.09
-
6117.5
... More
In 3rd Floor
1.09
-
6482.4
... More
Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter with FRP frame of size 45x90mm.(Darwaja /Exon Door make) In ground floor to Third floor
39.38
-
5440.3
... More
Supplying all materials, labour, T&P and fixing granite tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge In ground floor
0.45
-
2582.6
... More
In First floor
1.8
-
2596.8
... More
In Second floor
1.8
-
2611.9
... More
In Third floor
1.8
-
2627.6
... More
Supplying all materials, labour, T&P and fixing Kodappa tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge In ground floor
0.45
-
1070.7
... More
In first floor
1.8
-
1100.1
... More
In second floor
1.8
-
1131
... More
In Third floor
1.8
-
1163.5
... More
Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class Fly ash brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge (Sintex make double layer) . 1000 litre capacity water storage tanks. (Sintex make) Double layer.
12
-
15086.35
... More
Construction of 50 users RCC septic tank Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge. 1 x 5.80mx2.40mx1.50m=
20.88
-
194.75
... More
Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general. 1 x 5.80mx2.40mx0.90m=
12.53
-
208.45
... More
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.In ground floor 1x 5.80mx2.40mx0.15m=
2.09
-
4180.8
... More
Supplying all materials, labour, T&P and providing shoring and shuttering for foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per specification and direction of the Engineer in charge 1 x2 x ( 5.80 +2.40 ) x 3.30
54.12
-
99.2
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. R.C.C floor and roof slabs up to 4.30m height
12.1
-
428.8
... More
RCC beam,Column, girders and bressmer etc
68.16
-
723.5
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.In ground floor
9.87
-
6547.1
... More
Supplying all materials, labour,T&P and providing cement concrete(1:1 ½:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.In ground floor
13.16
-
7487.97
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:3) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.In ground floor (inside/outside)
46.96
-
173.04
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor (inside/outside)Area same as plastering in item-5-A above
39.68
-
30.6
... More
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
10
-
204.33
... More
Supplying all materials, labour, T&P and providing brick work with fly ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In foundation and plinth Manhole shaft -1 x 4 x 0.85 x 0.25 x 0.50
0.85
-
4921.25
... More
Supplying all materials, labour,T&P and providing Vent base in cement concrete(1:2:4) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
1
-
158.2
... More
Supplying all materials, labour, T&P and fitting and fixing UPVC SWR soil waste ventilating pipes and fittings to walls with nails, bobbins and wooden plugs or laying in trenches including earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. 110mm diameter U-PVC SWR pipe
1.8
-
329.07
... More
110mm dia U-PVC Plain shoe bend
1
-
195.83
... More
110mm dia U-PVC Cowl
1
-
40.32
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge 1 x2 x(5.65+2.25) x 0.15 x 2.40
5.69
-
108.2
... More
Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and fly ash brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge 1.40m dia x 2.00m deep soakway pit
1
-
18461.3
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements