Works Department Tender

Fly Ash. brick masonry of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with approved grade cement and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation and plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge

Providing, lifting, hoisting and laying Reinforced cement concrete of M-20 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.

Column Footing

Plinth Beam

Column Shaft

Floor Beam

Lintel Band

Chajja

Roof Slab

Cutting, straightening coiled or bent up M.S. Rod or tor steel of SAIL/ TATA / RINL (VIZAG) or equavalant make(Grade Fe-500D) including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Linear measurement will be taken and quantity will be calculated basing on the standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including weight of binding wire will not be considered for measurement) etc. complete as per specification & direction of Engineer-in-charge.

Fly Ash. brick masonry of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with approved grade cement and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge

20mm thick grading plaster (1:4) to RCC surface to celling fixished smooth including closed deep chipping and slurry instrument writing etc complete painting 2 writing materials, labour & T&P etc carriage charges with fixing its proper position as directed by Engineer-in-Charge.

Supplying in all floor of M.S. grill, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel window, critical frames for windows, stair case and parapet railing made out of M.S. square bar / flat including stair case hand railing with 40mm dia G.I. pipe etc. including paintingtwo coats over a coat of redoxide primer as per approved drawing and design with cost of all materials & labour, taxes, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge

Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

Providing, Fitting and fixing of false ceiling with Alluminium anodised T Section No.3215 with 2'-0" center to center L Section No.1705 up to 15 micron on 4 walls to be fixed by means of steel screw and PVC plug and the aluminium grid 2'-0" x 2'-0" with prelaminated particular board etc complete in all respect

Supplying, fitting and fixing vitrified colour printed series tiles of premium grade in floor of size 600mm x 600mm of approved make confirming to IS:13755 laid on 20 mm thick cemnet motar (1:4) (1 cement : 4 Course Sand) and filling joints with white cement of approved quality including cost, conveyance of all materials, cost of labour, royalties, sundries T&P etc. complete

Supplying, Fitting and fixing of Un-plastised Poly Vinly Chloride (UPVC) (Fenestal / NCL / UEKA ltd.) Three Track Three Pannel sliding with Door-60-series duly manufactured using UPVC reinforced profile of 108mm x 45mm x 2.5mm for outer frame and Door sash of 60mm x 55mm x 2.5mm capable of mounting single flazing system, structurally reinforced with hot dip galvanised upto 50 microns of minimum thickness of 1.5mm prefabricated & welded through fusing welding the door frame shadd be fitted with 6mm thick clear thoughness glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistance and the system is to be installed suing reinforced large couple at the site using anchor fastners, silicon rubber sealant, easy glazing, ndeglazing at site etc. including cost of all material,accessories, labour charges material and product confirming of ASTMD 638-14, EN-477-95 and other applicable code and standard

Supplying, Fitting and fixing of Un-plastised Poly Vinly Chloride (UPVC) (Fenestal / NCL / UEKA ltd.) Three Track Three Pannel sliding with window-60-series duly manufactured using UPVC reinforced profile of 108mm x 45mm x 2.5mm for outer frame and window sash of 42mm x 50mm x 2.5mm capable of mounting single flazing system, structurally reinforced with hot dip galvanised upto 50 microns of minimum thickness of 1.5mm prefabricated & welded through fusing welding the window frame shadd be fitted with 6mm thick clear thoughness glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistance and the system is to be installed suing reinforced large couple at the site using anchor fastners, silicon rubber sealant, easy glazing, ndeglazing at site etc. including cost of all material,accessories, labour charges material and product confirming of ASTMD 638-14, EN-477-95 and other applicable code and standard

Painting two coat with enamel paint over one coat of primer with approved quality paint & primer to Wood / Iron Work including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc. complete as per

Finishing plastered surface of walls with cement base wall putty of approved make and finishing the surface smooth and even by sand papering to receive paint in walls, at all height with staging wherever necessary with cost, conveyance, taxes of all materials, cost of all labour, all T&P etc. required for the work complete

Priming one coat wall primer make an even finishing surface in all floor and heights to wall surface of approved make and shade including sand papering, applying, putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour, T&P etc. complete

Wall painting with plastic emulsion paint for two with any approved paint whereever necessxarry with cost, conveyance, taxes of all materials, cost of all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-Charges

Wherether paint two with any approved shade on new work of two coats over a one coat of primer in all floors, all height with staging wherever necessary with cost, conveyance, taxes of all materials, cost of all labour, all T&P etc. required for the work complete in all respect as per the Direction of Engineer-in-Charge

Earth with excess soil with labour charges etc. complete ding 0.230m in depth including cost HRR, watering 7 laying in layer not dressing & breaking clods and compacting worsoil with initial leads & lifts including rough in embankment with excavated soil etc. complete.