Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 4,02,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_EICCL_86772_1Bid Award Id
ViewTender No
CCEEC-28/2022-23Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Brick Masonary with C.M(1:4) using Fly Ash.Bricks in Superstructure including watering curing etc complete.
7.43
45464
6119.06
... More
Fifth Floor
5.28
34881
6606.28
... More
R.C.C Work of Prop(M-20) using 20 mm and down graded chips including cost of all materials and labour T&P etc complete, but complete in all respect but excluding the cost of M S rod or tor steel & binding wires & labour charges for cutting bending, binding & tying the grills. As per the direction of Engineer in charge.
-
-
-
... More
Column Fourth Floor
34.87
859527
24649.47
... More
Fifth Floor
30.72
879758
28637.97
... More
Sixth Floor
4.85
156976
32366.32
... More
Lintel Fourth Floor
7.01
70343
10034.77
... More
Fifth Floor
8.15
90467
11100.32
... More
Sixth Floor
0.64
7917
12371.24
... More
Chajja Fourth Floor
10.13
13949
1377.02
... More
Fifth Floor
10.78
17153
1591.24
... More
Fins Fifth Floor
5.02
12002
2391.02
... More
Roof Beam Fourth Floor
28.13
693389
24649.47
... More
Fifth Floor
24.18
692466
28637.97
... More
Sixth Floor
2.13
68940
32366.32
... More
Roof Slab Fourth Floor
81.91
835077
10195.06
... More
Fifth Floor
68.56
774225
11292.67
... More
Sixth Floor
5.56
70110
12609.8
... More
Stair Case Fourth Floor
11
188678
17152.59
... More
Fifth Floor
11
216058
19641.71
... More
Cutting straightening of steel HYSD (Fe-415) conforming to (IS- 1786)) with bending, binding, cranking, hooking, welding or joining if necessary & tying the grills and placing in position as required for the Rod work in all floors and & for providing fan hooks hosting lowering & laying steels including cost conveyance taxes & royalties of all materials and binding wires of 18 to 20 gauge & cost of all labour T&P required for the work etc. Complete in all respect as per the direction of Engineer in charges (payment will be made on weight of MS rod or tersteel only basing on the co-efficient of MS rod or for steel bars approved by SAIL/ TATA/ competent authority and (No separate payment will be made towards the cost of binding wires over lapping, wastage coupling welded, joints, spacer bars, chairs stays, hangers and annealed steel wires or other methods for binding and placing etc. Fourth Floor
187.07
1763054
9424.57
... More
Fifth Floor
163.99
1550487
9454.77
... More
Sixth Floor
16.81
159467
9486.48
... More
12 mm thick cement plaster (IS – 9103) in C.M.(1:6) finished smooth to brick walls after racking out the joints including watering curing with cost conveyance taxes & royalty of all materials & cost of all labour T&P required for the work etc complete in all respect as per the direction of Engineer in charges. First Floor
1062.41
168115
158.24
... More
Fifth Floor
1071.41
176461
164.7
... More
Sixth Floor
155.9
26732
171.47
... More
16 mm thick cement plaster (IS – 9103) in C.M.(1:6) finished smooth to brick walls after racking out the joints including watering curing with cost conveyance taxes & royalty of all materials & cost of all labour T&P required for the work etc complete in all respect as per the direction of Engineer in charges.
842.27
178898
212.4
... More
Fifth Floor
856.7
189236
220.89
... More
Sixth Floor
196.51
45144
229.73
... More
6 mm thick cement plaster (IS – 9103) in cement mortar (1:3) to ceiling surface including watering curing with cost conveyance taxes & royalties of all materials &cost of all labours T&P required for work etc. complete in all respect as per the direction of Engineer in charge.
642.22
107231
166.97
... More
Fifth Floor
622.05
106470
171.16
... More
Sixth Floor
30.3
5316
175.46
... More
Supplying, fitting and fixing vetrified tiles in floor of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm Colour/Printed series of approved make in floors on 20mm thick bed of C.M. (1:4) (1cement:4course sand) . Fourth Floor
497.85
504814
1013.99
... More
Fifth Floor
493.48
506522
1026.43
... More
Providing, fitting, fixing vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm Colour/Printed series of approved make as directed by Engineer-in-charge in dados skirting and risers of steps on 12mm thick C.M (1:3) . Fourth Floor
750.03
689082
918.74
... More
Fifth Floor
759.14
706895
931.18
... More
Providing fitting & fixing Chequerred Tile in Floor over 25mm thk c.m(1:1) with approved shade matching the pigments to the shade including cost of all materials & Labour
58.45
51195
875.88
... More
Fifth Floor
58.45
51922
888.32
... More
Providing fitting and fixing Al. Door with OEL anodized Al door section of 9202 as vertical member,9201 as top member and 9200 as bottom & middle member with frame section No 9221 and tappered clip No 4660 and the frame to be completed by means of jointing angle No 1855 including all cost of labour T&P,hire charges of drilling machine,labour charges etc but including cost of 12mm laminated board .
44.87
277989
6195.44
... More
Fifth Floor
31.86
197386
6195.44
... More
Supplying fitting and fixing up window(Sliding type) made up alluminium Section 9778 as window frame section No 4095,4096 and 9777,3994 as shutter frame with 5mm thick black glass as pannel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour,T&P including cost of 5mm Glass etc complete.
20.49
74459
3633.96
... More
Fifth Floor
24.67
89649
3633.96
... More
Providing fitting fixing up Partition walling Al.anodized section No 9210 and 9207 as single groove and double grooves respectively as horizontal and vertical member and section 4660 as tapered clip and jointing angleNo-1855 etc including cost of 5mm Plain Glass .etc complete.
20.53
65109
3171.45
... More
Fifth Floor
19.7
62477
3171.45
... More
Supplying fitting and fixing M.S Window Grills with M.S flat of, 20 x 20 x 6 mm size including welding with cost of all materials including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cos Fourth Floor
1171
72836
62.2
... More
Fifth Floor
1129
70223
62.2
... More
Sixth Floor
42
2612
62.2
... More
Painting two coats with approved shade over a coat of primer including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cos Fourth Floor
54.39
13626
250.54
... More
Fifth Floor
51.46
13562
263.55
... More
Sixth Floor
2
554
277.21
... More
Cement Washing One Coat to plastered surface of wall and ceiling with cost of all materials and labour T & P etc
2546.9
44443
17.45
... More
Fifth Floor
2550.16
44551
17.47
... More
Sixth Floor
382.71
7011
18.32
... More
Providing finishing walls with water proofing Weather Coat paint two coats including cost of all materials and labour T & P etc.
453.76
39032
86.02
... More
Fifth Floor
453.76
40552
89.37
... More
Sixth Floor
258.49
24013
92.9
... More
Finishing wall surface with cement based wall putty (water based) of approved make and finished smooth on even surface to receive painting including cost of scaffolding staging charges with cost of all materials, taxes with labour & labour cess etc. compl Fourth Floor
1598.52
122558
76.67
... More
Fifth Floor
1598.52
125164
78.3
... More
Sixth Floor
133.55
10684
80
... More
Painting one Coat with approved coat of primer with including sand papering, applying putty wherever necessary & cost. Fourth Floor
1598.52
86831
54.32
... More
Fifth Floor
1598.52
90140
56.39
... More
Sixth Floor
133.55
7820
58.56
... More
Painting two coats with plastic paint over a coat of water bond cement primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost. Fourth Floor
1598.52
139406
87.21
... More
Fifth Floor
1598.52
142603
89.21
... More
Sixth Floor
133.55
12187
91.26
... More
Providing fitting and fixing RCC Jally (1:2:4) as per approved design to 2.5 cm to 5 cm thick including cost of all materials and labour t&p etc. including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour,labour cess with T&P etc, com Fourth Floor
5.57
1856
333.3
... More
Fifth Floor
5.57
1856
333.3
... More
Sixth Floor
0.74
246
333.3
... More
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair First Floor
7.5
22847
3046.36
... More
Fifth Floor
7.5
22847
3046.36
... More
Providing and laying 2.5 cm thick grading concrete (1:2:2) over roof slab with 6mm size bhg (CB ) chips after chiping, chiseling, cleaning the surface watering and curing etc.
663.19
240830
363.14
... More
Sixth Floor
43.83
16462
375.6
... More
Providing anfd fixing of structural glazing approved make to be fabricated from roll formed sections make of prepainted steel with primer of 75.5 micron thixck and finished paaint with polyster paint of 12-16 micron along withalkydbacker at the back of 5-7 microns and the sizes of outerframe being 46 x 52 mm and with all vertical & horizontalmujllions areof 46 x 70 mm and fixed beading are of 18 x 25 mm. sections for internal top and bottom frames in the louvers area should be 18 x 40 mm. Top hung shutter should be 46 x 46 mm. and glass to be used with safety laminated glass 12.8 mm thick with.78 mm inter layer poly vinyle Butyral(PVB) lamination between two glass with outer being 6mm thick toughened reflective of Reflactosolseries of saintglobain and innerglass being6mm thick glasstoughened clear of saint gobainmake with all taxes
31.51
306702
9733.5
... More
Fifth Floor
31.51
306702
9733.5
... More
Recessed wiring to light point/ fan point/Exhaust fan point/Call bell point with 1.5sqmm FR PVC Insulated single core multistarand copperConductor of ISI marked with 20mm dia non metalic PVC conductwith 5A 250V piano type switch ISI marked and ceiling roseis marked mounted on MS Box having front bakelite cover of suitable size,MS Box with 1.5sqmm FR PVC Single core multistrand copper conductor as earth wire includingall accessories and connection as per direction of Engineer in charge (Make of wire Finolex / L&T / Anchor / Havels / V-Guard / Greatwhite / HPL / MESCAB) light point Group-A
80
34320
429
... More
-do- light point Group-B
60
39900
665
... More
-do- light point Group-C
40
38480
962
... More
-do- Fan point Group-A
20
8580
429
... More
-do- Fan point Group-B
58
38570
665
... More
-do- Fan point Group-C
18
17316
962
... More
-do- Call Bell point Group-C
2
1924
962
... More
Recessed wiring to 5AMP/6AMP socket out let with 2x1.5sq mm for FR PVC insulated single core multistrand copper conductor of ISI marked in reccess 20mm dia non metalic PVC conduct with piano type switch phenolic laminated sheet suitable size ISI marked, MS Box and earthing point with 1x1.5sqmm FR PVC insulated single core multistarnd copper conductor for loop earthing etc,as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / L&T / Anchor / Havels / V-Guard / Greatwhite / HPL / MESCAB) Separate point-
12
5220
435
... More
On Existing board-
45
4005
89
... More
S/F of Computer Board Consisting of 3 Nos 5 Amp Switch and Socket including all connection etc as required complete in all respect as per direction of Engineer in charge(Make- Anchor/Cona/Graetwhite)
16
10256
641
... More
S/F of metal Box of 180mm x100 X 60 mm nominal size of surface or in cress with suitable size of phenolic laminated sheet cover infront including providing and fixing of 5 pin,15/16 Amp socket outlet and 15/16 Amp piano type switch ISI marked connection painting etc as required complete in all respect as per direction of Engineer in charge(Make- Anchor/Cona/ HPL)
36
11088
308
... More
S/F ofMultipurpose Board Consisting of 3 Nos 5 Amp Switch and Socket and 15 amp Switch and socket 1 No including all connection etc as required complete in all respect as per direction of Engineer in charge(Make- Anchor/Cona/Graetwhite)
4
3164
791
... More
Recessed Extra lead Sub-main wiring for light and fan point in 2x1.5mm2 FR PVC insulated single core multistrand copper conductor of ISI Marked confirming to IS-694/1990 in 20mm dia nonmetalic heavy duty flexible conduct 1.6 sqmm thick along with 1x1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / L&T / Anchor / Havels / V-Guard / Greatwhite / HPL / MESCAB) 2x1.5 sqmm +1x1.5 sqmm 1100 Volts confirming to IS 694/1990
1350
176850
131
... More
Recessed wiring to Sub-main in 2x2.5 sqmm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 32mm dia non metalic heavy duty flexible conduct 1.6mm thick along with 1x1.5sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge(Make of wire Finolex / L&T / Anchor / Havels / V-Guard / Greatwhite / HPL / MESCAB) (MCB DB box to swtich board)2x2.5 sqmm +1x1.5 sqmm 1100 Volts confirming to IS 694/1990
725
105125
145
... More
Recessed wiring to Sub-main in 2x4 sqmm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 20mm dia non metalic heavy duty flexible conduct 1.6mm thick along with 1x1.5sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge(Make of wire Finolex / L&T / Anchor / Havels / V-Guard / Greatwhite / HPL / MESCAB) (Mainswtich/Busbar to MCB DB box) 2x4 sq mm+1x1.5 sqmm 1100 Volts confirming to IS 694/1990
235
38305
163
... More
Recessed wiring to Main in 4x4 sqmm FRLS PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 20mm dia non metalic heavy duty flexible conduct 1.6mm thick along with 2x2.5sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / Havells / Anchor / Finolex/Polycab) 4X4sq mm+2x2.5 sqmm 1100 Volts confirming to IS 694/1990
95
23275
245
... More
Recessed wiring to Main in 4x10 sqmm FRLS PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 32mm dia non metalic heavy duty flexible conduct 1.6mm thick along with 2x4sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / Havells / Anchor / Finolex/Polycab) 4X10sq mm+2x4 sqmm 1100 Volts confirming to IS 694/1990
95
39710
418
... More
Supply of 10sq. mm 4 Core 1.1KV Grade ISI Marked pvc insulated pvc sheathed XLPE Alluminium Armored power Cable (Make-Polycab /Havells/Finolex)
22
6138
279
... More
Supply of 25sq. mm 4 Core 1.1KV Grade ISI Marked pvc insulated pvc sheathed XLPE Alluminium Armored power Cable (Make-Polycab /Havells/Finolex)
35
15050
430
... More
Supply of 300sq. mm 3 1/2 Core 1.1KV Grade ISI Marked pvc insulated pvc sheathed XLPE Alluminium Armored power Cable (Make-Polycab /Havells/Finolex)
76
238412
3137
... More
LAYING OF CABLE up to 25mmsq. mm 4 Core 1.1KV Grade ISI Marked pvc insulated pvc sheathed XLPE Alluminium Armored power Cable
40
3200
80
... More
LAYING OF CABLE up to 150sq. mm 3 1/2 Core 1.1KV Grade ISI Marked pvc insulated pvc sheathed XLPE Alluminium Armored power Cable
46
5934
129
... More
S/F of Bakelite Angle holder/Batten Holder of ISI marked in place of ceiling Rose complete in all respect as per direction of Engineer in charge (Make : Cona / Anchor / Havell's)
33
297
9
... More
S/F of 4 way TPN MCB DB on existgsurface / wall mounting with all connection complete in all respect as per direction of engineer incharge (Make : Schneider (ACTI 9 ) /legrand/siemens/Hager)
7
36848
5264
... More
S/F of 16 way Double Door MCB Box on existgsurface / wall mounting with all connection complete in all respect as per direction of engineer incharge (Make : Schneider (ACTI 9 ) /legrand/siemens/Hager)
4
17732
4433
... More
Supply and fixing of SP 6-32 A rating 240 V "C" series miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand/siemens/Hager)
74
28490
385
... More
Supply and fixing of DP 6-32 A rating 240 /415V "C" series miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand/siemens/Hager)
16
17504
1094
... More
Supply and fixing of DP 63 A rating 240 /415V "C" series miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand/siemens/Hager)
2
3404
1702
... More
Supply and fixing of FP 6-32A rating 415V "C" series miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand/siemens/Hager)
4
9228
2307
... More
Supply and fixing of FP 63A rating 415V "C" series miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand/siemens/Hager)
3
9828
3276
... More
S/F of A.C. point consisting of 32 Amp single phase starter with all connection complete in all respect as per direction of engineer incharge (Make : Schneider/legrand/siemens/Havells)
16
21648
1353
... More
Sypply and fixing of 48 inch / 1200mm A.C. Celling Fan High speed metalic colour ISI Marked with all connection complete in all respect as per direction of Engineer in charge Make:(Orient PSPO summer cool/Crompton High breeze/Almonard/Khaitan/Havells)
78
200694
2573
... More
S/F of step type electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge(Make-Usha/Anchor/Cona)
78
26052
334
... More
S/F of 12 inch Heavy duty (Metalic Colour) Exahust Fan with wall cutting, S/F of proper size of hume pipe, concreating, plastaring, painting with all connection testing and commissioning complete in all respect as per direction of Engineer in charge Make:(Orient PSPO summer cool/Crompton High breeze/Almonard/Khaitan)
18
55332
3074
... More
S/F of 400mm Heavy duty Wall Fan with wall fixing, with all connection testing and commissioning complete in all respect as per direction of Engineer in charge Make:(Orient PSPO summer cool/Crompton High breeze/Almonard/Khaitan)
2
7300
3650
... More
Supply and installation of chemicalearthing kit consisting of Maintenance free Safe Earthing Electrodes with ISI G.I.pipe dia 60 mm as secondary electrode of wall thickness 3.5 mm and the primary Earthing Electrode will be 32mm x 6mm x 1nos G.I strip filled with a highly conductive & non-corrosive compound in between the primary Earthing and the secondary Earthing, the surface area in mm will be 5,65,200 for 3mtrs.length and Cross Sectional Primary conducting area is 192 sq.mm And solid G.I base plate seals the unit at the bottom.(MES-GFC ground Filling compound will be provided in 25 kgs Bags.)
2
28400
14200
... More
Supplying and laying 25mm X 5mm copper strip on surface or in recess for connection etc as required.
55
78375
1425
... More
Installaion Charges
1
4000
4000
... More
S/F of 12 watt LED Recess Ceiling light fittings complete with all connections.(Make-Phillip's/Havell's/Wipro/Crompton/Panasonic)
12
15336
1278
... More
S/F of 36 watt LED Surface/Recess Ceiling light fittings complete with all connections.(Make-Phillip's/Havell's/Wipro/Crompton/Panasonic)
34
166600
4900
... More
Supply and fixing of 20watt,CW/WW 5700K,1800 Lumen led Aluminium Housing batten on wall ,making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Panasonic/ Great white/ Orient/ wipro/ Havells/Phillips)(2Years Warranty)
110
80960
736
... More
Supply and fixing of 9 Watt Bulb ,making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Panasonic/ Great white/ Orient/ wipro/ Havells/Phillips)
22
2640
120
... More
S/F of 630 A cubical panel board made of 16 SWG C.R sheet with powder coated with provision of following items with fabrication erection testing & comissioning of total enclosed panel board of size not less than 72"x72"x12' with (30*6 mm ).panel board shuld have following arrangements;- 630SDFU,630amp copper TPN busbar(Incomming)50*8mm with required size of insulating materials and nut bults.200 amp copper TPN busbar(Link busbar)35*5mm with required size of insulating materials and nut bults, copper TPN busbar(out oing)25*5mm with required size of insulating materials and nut bults.Transparent glass for isolation,415V 4strip & internal connection & provision for termination of incomming & out going cable , earthing etc, complete with supply & fixing of following switch gears,MFM2. RYB Indicator3,UV/ov/Earth fault relay for incomer4, SPD ,. 630 A 50 ka 4p mccb , 250A,25ka 4p Mccb -6nos , 250 amp changeover,CT coil upto 630 amp ,separete busbar for both dg and main ,earthing connector ,stand
1
263869
263869
... More
S/F of 63A copper busbar panel of size 24*18*8 inch of 63A 4P MCB AS INCOMER 19*6mm copper busbar, 415V 4strip & internal connection & provision for termination of incomming & out going cable , earthing, Indicator etc,
2
19130
9565
... More
S/F of 100A copper busbar panel of size 24*18*8 inchof 63A 4P MCB AS INCOMER ,25*3mm copper busbar 415V 4strip & internal connection & provision for termination of incomming & out going cable , earthing, Indicator etc,
2
20720
10360
... More
Supply and fixing of 4 pole (3P+N) ( T1+T2 - Iimp 8 kA/pole T2 - 60 kA) 25 KA SPD in existing cubicle panel board including drilling holes in cubcle panel, making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand/siemens/Hager)
1
25004
25004
... More
Supply and fixing of 4 pole MCCB 63-100A,Ics = 100% Icu, 16 KA breaking capacity, adjustableThermal,fixed magnetic type in existing cubicle panel board including drilling holes in cubcle panel, making connections, etc. as required complete in all respect as per direction of Engineer in charge(Make : Schneider (ACTI 9 ) /legrand/siemens/Hager)
10
95740
9574
... More
Supply and fixing of 4 pole MCCB 250A,Ics = 100% Icu, 36 KA breaking capacity, adjustableThermal,fixed magnetic type in existing cubicle panel board including drilling holes in cubcle panel, making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand/siemens/Hager)
1
32847
32847
... More
Supply and fixing of Digital Meter Displays Current, line to neutral & line to line Voltages, frequency & Power Factor. (VA & PF - Phase Wise & Average) IEC 62053-21 complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand/siemens/Hager)
1
3879
3879
... More
Supply ESE-60 SS Early Streamer Emission Air Terminal, Compilant to NFC 17-102 : 2011. ESE Lightning Air Terminal shall be configured as a spheroid which is comprised of two separate electrically isolated SS 316 panels. The insulation material used to electrically isolate the panels shall comprise of a base polymer which provides high ozone and UV resistance with a dielectric strength of 24 – 38 KV/mm. The central SS 316 material Tip shall be of min. 20mm dia and elevated above the spheroid to a length of min 90mm.
Lightning Air Terminal shall not have any electronic parts or components for propagation of up streamer. Termination arrangment shall be provided at bottom of ESE terminal with necessary hole to fix the downcoductor using compression lug. Termination arrangment at bottom of ESE terminal shall be insulated using delrin adapter of min. 55mm diax 60mm length, adpater shall provide good diaelectric properties to isolate ESE lightning arretser from supporting mast. ESE lightning arretser's Performance shall be tested in European accredited test laboratory as NFC 2011 and test report must show min. 50 implse tests with breake down timing of each test
. ESE Terminal shall be tested from CPRI for impulse current withstand test of 40 kA 5+ve & 5-ve impulse current withstand details.
Note:
1. ESE Terminal shape= spheroid
2. ESE Terminal panel & central rod material=SS 316
3. ESE adpater material =Delrin
4. ESE Terminal shall not have any electronic parts.
5. ESE Terminal tip length =min. 90mm
6. ESE Terminal performance testing from Europen Lab
7. ESE Terminal performance test must show show min. 50 implse tests with breake down timing of each test.
8. ESE Terminal shall be tested from CPRI for impulse current withstand test of 40 kA 5+ve & 5-ve impulse
9. ESE Terminal min. weight 3.5kg and size: H=400mm & Dia. 150mm
MAKE-INDELEC PREVECTRON-S 6.6 /SATELITE-3/PP STORMKING/ESRICO DYNASPHERE 3000
1
143000
143000
... More
Supporting Mast: Supply, Delivery & Installation of The mounting pole used to support the lightning air terminal shall either be a supporting mast or Free standing mast at a ideal height of 05 metres above to be area protected or as per required level of protection. If any height restrictions are there then min height should be 2mtr but radius of protection will change according to height. The mounting pole and supports shall be securely fixed with brackets and guy wires where required to withstand maximum locally recorded wind velocity. Mounting Pole shall be non corrosive and made up of medium class SS pipe of 2" dia having base plate at bottom for securely fixing mast on rooftop. Also PVC insulated metallic wire rope should be used for guying purpose. The down conductor shall pass through the centre of the pole for the entire length of the pole and it will be out at bottom of the pole. All the mounting accessories should be non corrosive and made up of SS.
Model: Supporting Guyed Mast : 05Mtr x 2" dia with base plate, guying kit and mounting accessories.
Supporting Mast: Supply, Delivery & Installation of The mounting pole used to support the lightning air terminal shall either be a supporting mast or Free standing mast at a ideal height of 05 metres above to be area protected or as per required level of protection. If any height restrictions are there then min height should be 2mtr but radius of protection will change according to height. The mounting pole and supports shall be securely fixed with brackets and guy wires where required to withstand maximum locally recorded wind velocity. Mounting Pole shall be non corrosive and made up of medium class SS pipe of 2" dia having base plate at bottom for securely fixing mast on rooftop. Also PVC insulated metallic wire rope should be used for guying purpose. The down conductor shall pass through the centre of the pole for the entire length of the pole and it will be out at bottom of the pole. All the mounting accessories should be non corrosive and made up of SS.
Model: Supporting Guyed Mast : 05Mtr x 2" dia with base plate, guying kit and mounting accessories.
1
1800
1800
... More
Supply & Installation of 70sq.mm cross section downconductor of single core flexible Copper cable made of min.990Nos copper strands of 3mm dia and having PVC insulation of min. 3mm thickness and overall dia of 16mm. It should be fixed using SS/GI saddles & fixtures every 0.5mtr.
Model: Single core flexible Cu. Cable 70Sq.mm with SS saddles.
180
153000
850
... More
Code No. MES- 80(3mtrs)( G.I)
Supply, Delivery & Installation of Maintenance free Safe Earthing Electrodes CPRI Certified with ISI G.I.pipe dia 75 mm as secondary electrode of wall thickness 3.5 mm and the primary Earthing Electrode will be 50mm x 6mm x 1nos G.I strip filled with a highly conductive & non-corrosive compound in between the primary Earthing and the secondary Earthing, the surface area in mm will be 7,06,500 for 3mtrs.length and Cross Sectional Primary conducting area is 300 sq.mm And solid G.I base plate seals the unit at the bottom.(MES-GFC ground Filling compound will be provided in 25 kgs Bags.)
2
26000
13000
... More
ROHS CERTIFIED Ground Filling Compound filled surrounding to earthing electrode. It should absorb the moisture from surrounding area and it should be non corrosive in nature. It should maintain the constant ohmic value for long life. It should be supplied in packing of 25kgs bag.
(2 Bags required for each earthing electrode.)
4
4840
1210
... More
Lightning Strike Recorder (L.S.R.): Supply of Australian make L.S.R. It should be non electronic& non- resettable type having 7 digits display &enclosed in an IP-67 enclosure with minimum sensitivity of 1000A & maximum capacity of 220KA tested on 8/20 micro second wave from as per IEC 60-1: 1989. It should be non electronic type and does not require external power supply for working. Supplier should do on site testing of LSR, where impulse generate should be used to show working of LSR. After impulse current passing through LSR it should change the counter reading.
Model: LSR.
1
30000
30000
... More
Installaion, Testing and Commisioning of lightning arrester
1
22000
22000
... More
Supply and Installation OF 2 Ton Air Conditioner (3 Star) make: (Bluestar/Carrier/Voltas/ Hitachi )
9
618714
68746
... More
S/F of copper cooling pipe with insulation packing and flexible copper cable
45
48150
1070
... More
S/F of Nylon Netted Drain Pipe with C clamp
45
10125
225
... More
S/F of Outdoor Unit Wall mounting Stand with Anchore fastener (Heavy duty for 2 Ton and above AC Machines)
9
24300
2700
... More
S/F 5 kva voltage stabiliser 130-300V (make : V guard)
9
63603
7067
... More
Installation of 125kva D.G with AMF penal board set including earthing,pedestal,cabling and all necessary requirement
1
1144840
1144840
... More
Cubical panel room
1
90000
90000
... More
A.FIRE PROTECTION WORK(A-1) FIRE EXTINGUISHERS
Providing & Fixing of fire extinguishers with necessary accessories, stand, trolley, etc. 6 Kg ABC (Powder Type) Fire Extinguisher. In HP Mild Steel Cylinders ISI marked fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged with ABC powder (Mono Ammonium Phosphate) pressured by Nitrogen complete in all respects including wall suspension bracket and conforming to IS:15683
30
79770
2659
... More
ISI marked (IS:15683) portable AFFF Mechanical foamfire extinguisher, Foam type capacity 9 liters with gun metal cap and nozzle and complete in all respects including initial fill and wall suspension brackets
6
21054
3509
... More
ISI Marked portable fire extinguisher, 4.5 kg CO2 type fire extinguishers complete in all respect including initial fill and wall suspension brackets & shall conform to latest IS 15683
18
104310
5795
... More
Supplying and installing at approved location approved make fire buckets (3 nos./set) of 24 gauge galvanized steel sheet, standard 9 litre capacity and of round bottom shape, painted white inside and black on the bottom, inscribed with letters '' FIRE'' in black and gold with dry clean fire sand. The scope shall also include the stand for mounting the sand bucket.
3
4017
1339
... More
(A-2) FIRE RISER: Supplying, installation testing and commissioning of the following. ‘C' class MS pipe as per IS1239 with welded / flanged / screwed joints and with heavy clamps, hangers, brackets or pipe supports (all with screwed/welded joints) as required including MS pipe of shorter lengths, tapering connecting pieces, short or long bends, forged specials like sockets, union nuts, elbows, reducers, plugs, Tees etc. Complete to make the system operative as required by LFA / TAC authorities. The pipes will have to be laid and fixed on walls, ceilings, into brick walls or RCC with lead anchor fasteners. The work includes making holes in brick or RCC walls, slabs/ roofs and making good the damages by bringing to the original condition to the satisfaction of the Consultant/Client and painting two coats of approved shade(Post office red)of enamel paint over a coat of approved primer for over ground / overheads pipes. Note : The piping installation has to be put to hydraulic test to1.5 times the working pressure & as per latest applicable code & standard before applying paint etc. complete. 100 mm.
40
56920
1423
... More
80 mm
12
11628
969
... More
Supply and installation, testing and commissioning of CI Butterfly valves ( control of each shaft) ) conforming to BS 5155 ,PN 1.6 tested to 1.5 times working pressure with necessary companion flanges, bolts, nuts, gasket packing and any other spares, including indicator for open and shut position as per fire practice etc complete. 100 mm.
15
99675
6645
... More
Providing and fixing Single headed hydrant having outlet of 63 mm dia (2.1/2”) N.B. hydrant (IS:5290) landing valve in Stainless Steel Morris Pattern instanteous coupling type TAC / LFA approved & ISI certified heavy type hydraulically tested to 1.5 times working pressure with necessary nuts, bolts etc.
9
82575
9175
... More
Providing & fixing 63mm dia RRL hose pipe as per IS 636 TYPE A TAC/ LFA approved of standard length of approved pattern and size including gun metal male and female Coupling duly bound with copper wire etc. complete.
18
103050
5725
... More
Providing and fixing TAC approved fire hose cabinet to house fire hydrant & hose, including all other related accerrories fabricated from M.S. sheet (2mm thick) of fully welded construction having front door with locking arrangement, partially glazed with 4 mm thick glass. Cabinet shall be powder coated & painted with post office red colour of size as approved by the engineer-in-charge to house 15 mtr.x2 nos. hoses. The hose box size is 750 mm x 600 mm x 300 mm.
18
153018
8501
... More
Supplying & fixing first aid fire hose reel of thermoplast braided suitably reinforced 20 mm size & 30 m standard length with 5 mm tapering branch nozzle, 25mm dia. Pipe to connect to riser with cut off ball valve attachment. Hose to be swinging type wall mounted drum & recessing into hose cabinet to suit location including fixing with lead anchor fasteners & bolts (Including drum and swivel arrangement) etc complete. (IS 884).
15
146340
9756
... More
Supplying and fixing specially designed orifice plates (minimum 6 mm plate thickness) on hydrant outlets of landing valves including distant pieces of suitable size for reducing delivery pressure to 3.5 kg/ sq.cm at hydrant valve , as required by LFA complete with necessary accessories, etc. complete.
15
23805
1587
... More
Providing, fixing and testing forged brass 25 mm dia screwed inlet single acting air release valve with 25 mm dia ball valve on inlet side and pressure gauge with isolating cock.
6
13026
2171
... More
Providing and fixing Stainless Steel standard branch pipe dia 63 mm inlet with nozzle 20 mm dia outlet conforming to IS : 903, suitable for instantaneous connections to hose coupling etc. as required:
12
25668
2139
... More
(A-3)EXTERNAL HYDRANT SYSTEM
Excavations for pipelines in trench and pit in open areas where disposal or surplus earth is done along the alignment, including trimming and dressing sides, leveling of beds of trenches to correct grades, cutting joint holes, refilling consolidation and dewatering of refilling in 15 cm layers & restoration & unmettalled or unpaved surface to it's original condition. The rate including the cost of necessary timbering dewatering of drain water, diversion of traffic, night signals, fixing caution boars, watching fencing etc. Upto 1.5m depth in all classes of soil
174
113100
650
... More
Supplying, installation testing and commissioning of the following ‘C’ class MS Pipe as per IS1239 for underground/over ground pipes with welded / flanged connection with saddles, supports (all with screwed/welded joints) as required including pipe of shorter lengths, tapering connecting pieces, short or long bends, specials like sockets, union nuts, elbows, reducers, plugs, Tees etc. Complete to make the system operative as required by LFA / TAC authorities the pipes will have to be laid and fixed in trenches. The work includes excavation in all types of soils and back filling, dewatering, etc., making holes in brick or RCC walls, slabs/ roofs and making good the damages by bringing to the original condition to the satisfaction of the client and painting two coats of approved shade(Post office red)of enamel paint over a coat of approved primer for overheads pipes and providing and fixing pyp kote (corrosion protection tape) including supply and application of pipe coating and spiral Wrapping for underground piping (wrapping should have overlap of 15 to 20mm) etc. Complete as per ASTM standards/IS: 10221 for corrosion protection of pipes for the underground installation. Note: The piping installation has to be put to hydraulic test to1.5 times the working pressure & as per latest applicable codes & standard before applying paint or pipe coating or wrapping etc. complete. 150 mm dia.
245
574770
2346
... More
100 mm dia.
35
56035
1601
... More
80 mm dia.
18
19566
1087
... More
Providing and fixing hydrant stand posts of 80 mm dia. With flanges and accessories and supply, fixing 63 mm dia SS Single headed Hydrant Valve in the courtyard IS:5290 Including 2 coats of approved enamel paint (red) over a coat of primer, complete with 2.1/2” ‘Morris’ pattern instaneous couplings, etc. complete.
6
55050
9175
... More
Providing & fixing 63mm dia CP hose pipe as per IS 8423 TYPE A TAC/ LFA approved of 15 mtr. standard length of approved pattern and size including SS male and female Coupling duly bound with copper wire etc. complete.
12
70032
5836
... More
Providing and fixing TAC approved fire hose cabinet to house fire hydrant & hose, including all other related accerrories fabricated from M.S. sheet (2mm thick) of fully welded construction having front door with locking arrangement, partially glazed with 4 mm thick glass. Cabinet shall be powder coated & painted with post office red colour of size as approved by the engineer-in-Charge to house 15 mtr.x2 nos. hoses. The hose box size is 750 mm x 600 mm x 300 mm .
6
51006
8501
... More
Supplying and fixing 4 way Fire Brigade service inlet of size 150 mm dia. with 4 No. 63mm (2.1/2") size Stainless Steel male outlets ( Stainless Steel male coupling) including metallic cover of mild steel and glass front, indicator plates,150mm BFV, 150 mm NRV etc. complete. as required by LFA/TAC/engineer in charge.
1
31650
31650
... More
Supplying and fixing 4 way Fire Brigade draw out connection of size 150 mm dia. with 4 No. 63mm (2.1/2") size SS male outlets ( Stainless steel male coupling) including 150 mm dia foot valve etc. complete to be connected with fire water tank. as required by LFA/TAC/engineer in charge
1
26425
26425
... More
Supply and installation, testing and commissioning of Isolation Sluice valves tested to ISI marked ,PN 1.6 with CI body, bonnet & brass trim parts, & having necessary companion flanges, bolts, nuts, gasket packing and any other spares, including indicator for open and shut position to be installed underground in valve chamber as per fire practice etc complete. 150 mm dia.
2
55146
27573
... More
100 mm dia
2
35882
17941
... More
Constructing masonry chamber 60 x 100 x 100-150 cm. Inside with 75 class designation brick work of 250mm wall thickness in cement mortar 1:4 for sluice valve & top slab cc 1:1.5:3 mix necessary excavation foundation concrete 1:3:16 of 150mm thickness and inside plastering with cement mortor 1:3 , 15mm thick finished with a floating coat of neat cement complete as per standard design. The scope shall also include CI surface box as per approved quality & CI heavy duty cover for the valve chamber. The scaope shall include all required civil work like excavation, dewatering, backfilling, etc. Valve Chamber : 60 x 100 x 100 - 150 cm.
2
15338
7669
... More
(A-4)FIRE PUMPS & RELATED ACCESSORIES Supplying & installing completely testing & commissioning of End Suction Back Pull Out pump set having pump speed of 2900 rpm, Pump Efficiency not less than 65%, with CI Casing, Bronze Impeller, SS 410 Shaft & Shaft Sleeve Connected through Flexible Coupling with a TEFC Sq. Cage Induction Motor mounted on a common base frame fabricated in MS Channel. Packing has to be of Mechanical seal. It has to be inclussive of all the pump accessories. The pump shall be capable of giving not less than 150% discharge at a head not less than 65% of the rated head. Motor to be of continuous rating Motor to be suitable for 415V, 50Hz, AC supply of 35 KW rating for the above pumps. Motor shall accept +/- 10% variation in voltage and +/- 3% variation in frequency. It has to be of IE2 efficiency class. etc. complete. Pump - Motor : Discharge : 1620 LPM, Head-70 mtr.
1
320871
320871
... More
Supplying, installing, testing and commissioning of End Suction Back Pull Out pump set having pump speed of 2900 rpm, Pump Efficiency not less than 25%, with CI Casing, Bronze Impeller, SS 410 Shaft & Shaft Sleeve Connected through Flexible Coupling with a TEFC Sq. Cage Induction Motor mounted on a common base frame fabricated in MS Channel.Motor to be suitable for 415V, 50Hz, AC supply of 11 KW rating for the above pumps. Motor shall accept +/- 10% variation in voltage and +/- 3% variation in frequency. It has to be of IE2 efficiency class. Packing has to be of Mechanical seal. It has tio be inclusive of all the pump accessories complete . The scope shall also include necessary coupling, coupling guard, base frame, foundation bolts, RCC foundation, etc. complete Pump - Motor: Discharge: 180 LPM, Head: 70 mtr.
1
167200
167200
... More
Supply, installation, testing & commissioning of diesel Engine driven common stand by pump, horizontal centrifugal end suction type with gland packing and capable to deliver 1620LPM , to ensure a minimum pressure of 3.5 Kg/Sqcm at the farthest or topmost hydrant / sprinkler. Fire pump shall have C.I. casing, CS diffusers, bronze impeller (hard finished and dynamically balanced) and S.S. (304) Shaft with mechanical seal. The installation shall be complete with necessary pressure gauge with gun metal shut off cock on suction & delivery side. The pump shall coupled to not less than 35 kw of Diesel engine radiator water cooled type with speed not more than 1800 RPM and complete set shall be mounted on common base frame. Batteries & battery leads with stand, Fuel tank ( for 6 Hrs. operation ) with stand & gauge glass, Fuel piping with valves. The quoted rate shall includes radiator water cooling piping(if required) coupling guard and other standard accessories,RCC foundation (as recommended by manufacturer) and foundation bolts, etc. complete. Pump shall be capable of furnishing Not less than 150% of rated capacity at a head of Not less than 65% of the rated head. The shut off head shall Not exceed 120% of rated head. flexible coupling, coupling guard,anti vibration pad & exhaust pipe connection complete as required. Pump - diesel engine: Discharge: 1620 LPM, Head: 70 mtr.
1
631200
631200
... More
MCC for Fire Pumps : Design, manufacture, supply ,installation, testing and commissioning of following Automated Fire panel suitable for 415V, 3 phase, 4 wire, 50 hz power distribution system. The panel should be indoor, free standing, floor mounting, sheet metal clad, Cubicle, dead front, dust and vermin proof, compartmentalized design fabricated out of 2mm CRCA sheet complete with Cu busbars, a separate earth bus bar to be provided through out the length of the panel. The incoming and outgoing feeders shall be accommodated in a modular multitier arrangement, adequate size cable alley, painting, earthing numbering, damper plate etc. as required as per direction of engineer-in-charge and as per local Fire Authority requirement.The panel shall be fabricated by only CPRI approved manufacturer As per the details below INCOMING 1 Nos 200A FP MCCB (50 KA), 1 Set of 400 Amps. TPN Cu. Bus bars with color coded heat shrinkable PVC sleeves. Indicator R,Y,B,ON,OFF,TRIP. Ammeter LCD type display+3 CTs,Voltmeter LCD type display OUTGOING FEEDER FOR MAIN PUMPS - 01 No : 01 No 160 A TP MCCB, with star delta Starter contactor and OLR ratings as per type 2 co-ordination,with digital ammeter, voltmeter, ON,OFF push button, local remote switch,auto manual seclector switch etc. FEEDER FOR JOCKEY PUMP - 01 No: 01 No 32 A TP MCCB, with star delta Starter contactor and OLR ratings as per type 2 co-ordination, with Digital Ammeter,voltmeter, ON,OFF push button, local remote switch, auto manual selector switch etc. DIESEL ENGINE PUMP 01 No a) 25Amps DPMCB - 01 No( b) Battery charger with transformer with rectifier resistance DC ammeter, DC voltmeter, Trickle / booster / off selector switch - 1 No (c) 1 set of indicating lamps for the following : 1. Phase indication 2. Battery charger on 3.Over load relay 4. DC supply on 5.Control switch on 6. Engine fails to start 7. Pump on 8. Low oil pressure 9. High water temperature10. Auto manual selector switch (d) 1 sets of push button stations for the following : 1. Engine Start 2. Engine Stop 3. Engine - hooter ACK 4. Engine - fault reset (e) Selector switches (Engine control, mode selector)-1 No ( f) Auxiliary relays / contactors / timer for sequence operating for starting and stopping of the engine - 1 set (g) Hooter for audio alarm (Industrial type) - 1 No. (h)Automatic source transfer Relay with 3 attempt starting,High Low Lube pressure, timers and relays as required and suitable contactor.Programmable Logic Controller for automatic operation All the components shall be housed in a common cubical made of 2mm CRCA sheet with required stiffeners ( if required). The panel shall be powder coated of approved color both inside & out side. The panel shall have both bottom & top cable entry provisions and panel shall be mounted on Pedestal of 300 mm height. Also panel shall have sufficient (min. 10 Nos) NO/NC contacts for extending the status( annunciation) of fire pumps to the Fire alarm panel.
1
235869
235869
... More
Earthing with G.l. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry 'enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. as per IS 3043:1987
4
17308
4327
... More
Supplying and laying 25 mm X 5 mm G.l strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.l. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.l. nut bolt & spring washer spaced at 50mm).
60
5100
85
... More
CABLE Supply, laying testing and commissioning of L.T. Al. XLPE armoured / unarmoured cable confirming to IS : 7098 Part - II as per direction of engineer-in-charge as per the description given below: 4C x 95 sq.mm
40
26000
650
... More
4 C x 50 Sqmm.
30
11340
378
... More
12 C x 2.5 Sqmm.
30
7500
250
... More
4 C x 16 Sqmm.
30
5220
174
... More
CABLE END TERMINATION Supply, fixing, connection, testing and commissioning of double compression brass cable glands and crimping type lugs / sockets with necessary tools and equipments as specified in specifications and IS. The glands and lugs / sockets shall be suitable for cable size and type mentioned above. The job also includes, if necessary, supply and fixing of extension busbar of same material on circuit breaker / FSU or panel board terminal / connector to connect more than one no. of parallel cables or to connect higher size cable to lower size unit. The job also includes earthing the glands and armour of the cable with common earth bar or flexible copper mesh. 4C x 95 sq.mm
2
696
348
... More
4 C x 50 Sqmm.
16
4368
273
... More
12 C x 2.5 Sqmm.
24
1800
75
... More
4 C x 16 Sqmm.
16
2736
171
... More
Providing and fixing Power wiring with 2 core x 1.5 sq.mm. PVC armoured copper cable for wiring pressure switches, etc. Including all required material and labour, terminations, etc. Complete.
160
17920
112
... More
Supplying, installation testing and commissioning of the following ‘C’ class MS Pipe as per IS:1239 for over ground pipes with flanged/ welded and with heavy clamps, hangers, brackets or pipe supports (all with flanged/welded joints) as required including pipe of shorter lengths, tapering connecting pieces, short or long bends, MS specials like sockets, union nuts, elbows, reducers, plugs, Tees, bends, etc. Complete to make the system operative as required by LFA / TAC authorities the pipes will have to be laid and fixed in trenches on walls, ceilings, into brick walls or RCC with lead anchor fastners. The work includes excavation in all types of soils and back filling and making holes in brick or RCC walls, slabs/ roofs and making good the damages by bringing to the original condition to the satisfaction of the engineer-in-charge and painting two coats of approved shade(Post office red)of enamel paint over a coat of approved primer for overheads pipes Note: The piping installation has to be put to hydraulic test to1.5 times the working pressure (for minimum 2 hrs.) before applying paint or pipe coating and wrapping etc. Complete 200mm ( 6 mm thk IS 3589)
12
37488
3124
... More
150mm
18
37530
2085
... More
100 mm
12
17076
1423
... More
80 mm
6
5814
969
... More
50 mm
12
7404
617
... More
40 mm
12
5208
434
... More
Providing, installing and commissioning C.I. flanged "Y" type Strainer with SS mesh, suitable flanges, nuts, bolts, gaskets etc. complete (ISI). 200 mm
2
75732
37866
... More
Supply and installation, testing and commissioning of double flanged Isolation Sluice valves conforming to IS 14846 tested to ISI marked ,PN 1.6 with CI body, bonnet & brass trim parts, & having necessary companion flanges, bolts, nuts, gasket packing, support and any other spares, including indicator for open and shut position Size : 200 mm (GEAR OPERATED)
3
134814
44938
... More
Size : 150 mm
2
55146
27573
... More
Size : 100 mm
2
35882
17941
... More
Supply and installation, testing and commissioning of CI Butterfly valves ( heavy ) conforming to BS 5155 ,PN1.6 tested to 1.5 times working pressure with necessary companion flanges, bolts, nuts, gasket packing, support and any other spares, including indicator for open and shut position as per fire practice etc complete. Size : 150 mm
6
52188
8698
... More
Size : 80 mm
1
5093
5093
... More
Size : 50 mm
1
4527
4527
... More
Size : 40 mm
1
2619
2619
... More
NRV conforming to IS 5312 (swing type) or to API 594/598 (dual plate check type) with CI body & brass trim part, PN 1.6 having necessary companion flanges, CS hardwares. Gaskets, arrow indicating direction of flow, etc. complete. It shall be ISI Marked and approved make Size : 150 mm
2
39918
19959
... More
Size : 80 mm
1
8139
8139
... More
Supply, installation testing and commissioning pressure switch assembly with interlocking of pumps.
3
16470
5490
... More
100 mm dial Pressure gauge with Syphon tubing, isolation valve & mounting accessories complete Range: 0 - 10 kg/sq.cm.
4
15984
3996
... More
Supply, installation, testing & commissioning of Rubber bellows on discharge side of pump conforming to EJMA with all hardwares, companion flanges & gaskets, etc. Size : 150 mm
2
17752
8876
... More
Size : 80 mm
1
7997
7997
... More
Supplying, installing, testing and commissioning of hydraulically operated Sprinkler control valve, with water motor gong bell and trims as required, pressure gauges, drain valves, ball valves, check valves, strainers etc. complete.as per NBC/LFA/direction of engineer-in-charge Size : 150 mm.
1
48760
48760
... More
SITC of electronic type water level indicator with LED panel, with probe & all control wiring to operate the system automatic/manual & shall prevent the pump from dry running as per NBC/LFA/ direction of engineer-in-charge
1
32650
32650
... More
Ball valve of 15 mm dia
6
2754
459
... More
(A-5)TERRACE PIPING & ACCESSORIES Supply and installation, testing and commissioning of CI Butterfly valves ( heavy ) conforming to BS 5155 ,PN1.6 tested to 1.5 times working pressure with necessary companion flanges, bolts, nuts, gasket packing, support and any other spares, including indicator for open and shut position as per fire practice etc complete. Size : 150 mm
1
8698
8698
... More
Size : 100 mm
3
19935
6645
... More
NRV conforming to IS 5312 (swing type) or to API 594/598 (dual plate check type) with CI body & brass trim part, PN 1.0 having necessary companion flanges, CS hardwares. Gaskets, arrow indicating direction of flow, etc. complete. It shall be ISI Marked and approved make Size : 150 mm
1
19959
19959
... More
100 mm dial Pressure gauge with Syphon tubing & isolation valve Pressure Guage: 0-7 kg/sq.cm.
3
8925
2975
... More
Supplying, installation testing and commissioning of the following ‘C’ class MS Pipe as per IS:1239 for overhead pipes with flanges welded and with heavy clamps ,hangers, brackets or pipe supports (all with screwed/welded joints) as required including pipe of shorter lengths, tapering connecting pieces, short or long bends, MS specials like sockets, union nuts, elbows, reducers, plugs, Tees etc. Complete to make the system operative as required by LFA / TAC authorities the pipes will have to be laid and fixed in trenches on walls, ceilings, into brick walls or RCC with lead anchor fasteners. The work shall be to the satisfaction of the engineer-in-charge and painting two coats of approved shade(Post office red)of enamel paint over a coat of approved primer for overhead pipes Note : The piping installation has to be put to hydraulic test to1.5 times the working pressure & as per latest codes & standards before applying the paint Size : 150 mm
126
262710
2085
... More
Size : 100 mm
24
34152
1423
... More
(A-6)SPRINKLER SYSTEM
Supplying, installation testing and commissioning of the following ‘C’ class MS Pipe as per IS:1239 for overhead pipes with fittings & flanges including pipe of shorter lengths, tapering connecting pieces, short or long bends, MS specials like sockets, union nuts, elbows, reducers, plugs, Tees etc. Complete to make the system operative as required by LFA / TAC authorities the pipes will have to be laid and fixed in trenches on walls, ceilings, into brick walls or RCC with lead anchor fasteners. The work shall be to the satisfaction of the engineer-in-charge and painting two coats of approved shade(Post office red)of enamel paint over a coat of approved primer for overhead pipes. Note : The piping installation has to be put to hydraulic test to1.5 times the working pressure & as per latest codes & standards before applying the paint. Size : 100 mm
24
34152
1423
... More
Size : 80 mm
82
79458
969
... More
Size : 65 mm
82
66256
808
... More
Size : 50 mm
123
75891
617
... More
Size : 40 mm
165
71610
434
... More
Size : 32 mm
165
61380
372
... More
Size : 25 mm
800
233600
292
... More
Supplying, installing, testing and commissioning of standard response Sprinkler quartzoid bulb type with 15mm screwed end connection of 68 deg. C. temperature rating, K 80 and orifice shall Not be less than 3 mm.
Pendent sprinkler
323
109820
340
... More
side wall sprinkler-standard coverage
65
27625
425
... More
Supplying, installing, testing and commissioning of sight glass unit with required size orifice plate, test valve and complete accessories like tees,elbows flanges etc.as per NBC/LFA/direction of engineer-in-charge. Test assembly
3
13950
4650
... More
Drain Valve (25 mm)
5
8250
1650
... More
Drain Pipe of 25 mm dia.
43
12556
292
... More
Supplying ,installation, testing and commissioning of CI Butterfly valves ( heavy ) conforming to BS 5155 ,PN1.6 tested to 1.5 times working pressure with necessary companion flanges, bolts, nuts, gasket packing, support and any other spares, including indicator for open and shut position as per fire practice etc complete. Size : 100 mm
5
33225
6645
... More
50 mm (Drain Ball type valve for each riser / drain downtake)
5
22635
4527
... More
Supply & installation of approved make flow switch on sprinkler header on each floor, operating at 24-V with all accessories & hardwares as per NBC/LFA/direction of engineer-in-charge.
5
54940
10988
... More
(A-7)SIGNAGES Supplying and installing of in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC reflective self adhesive vinyle painted foam board, complete with mirror fasteners. Signage with printed "IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED OTHERWISE" of 1.5cm height letters in red with white back ground. The size of the board shall be 25cm x 30 cm and shall be fixed at the height of 2 mts. from finished floor near Manual call points.
9
19170
2130
... More
Floor identification signage ( i.e., GROUND FLOOR …etc.) at each stair enclosure on every floor, indicating the floor number in words, lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 15cm x 60cm.
12
8760
730
... More
Fire Exit signage at each stair on every floor, indicating the direction of fire exit, lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 15cm x 60cm.
9
6570
730
... More
Supplying and installing of in position the signages " FIRE ORDER" it should contain the following matter on 3mm thick "Opaque" PVC foam board of computerized cut, PVC Non-reflective self adhesive vinyle painted foam board of 3' x 4'. as per BIS Specification. a) A) alert the security at security room by actuating manual call point located at strategic locations. B) evacuate the occupants by using fire exits and emergency exits only and assemble at various assembly points. (C) if possible try to extinguish the fire by using nearest / suitable portable extinguisher or water from nearest wet riser. D) be calm and do not give any room from panic, walk, do not run. (E) if you encounter serious difficulty in evacuation, flat and try to attract attention of rescue team.
6
20100
3350
... More
b.Action by security/reception upon receipt of information through fire alarm or fire detectors or by using public address system. (A) alert the occupants by using public address system. B) inform fire control through any one of the following phone numbers: 101 /(local numbers) C) refer evacuation plan from evacuating standard people. D) guide the fire force, on their arrival to the seat of fire. E) in case of the casualties, call ambulance by dialing number…….. Phone : -----------------------Fax : ---------------------------- as per BIS Specification.
1
3350
3350
... More
Supplying and installing of in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC reflective self adhesive vinyle painted foam board, complete with mirror fasteners. as per BIS Specification. Fire hose reel
6
2580
430
... More
Lifts
6
2580
430
... More
Fire extinguishers
27
11610
430
... More
Analogue addressable Main fire alarm panel
1
430
430
... More
Sprinkler control valves
1
430
430
... More
MCP’s
12
5160
430
... More
(B) ANALOGUE ADDRESSABLE FIRE DETECTION AND ALARM SYSTEM Supply, installation, testing and commissioning of Main Fire Alarm Control Panel (FACP), the panel shall be addressable analogue fire detection and alarm type with capacity of 4 loops complete with all accessories and battery back up for 48 hours in standby mode and 15 minutes in alarm condition. The panel shall have minimum of 80 character LCD display. Each loop shall support 99 analog / addressable devices and 99 modules minimum as system capacity. The panel shall have TCP / IP facility. The panel shall be as per technical specification. The panel shall be UL/EN/FM approved. The quoted rate shall inclusive of Bacnet/Modbus interface for fire alarm panel with complete accessories.
1
292995
292995
... More
Supplying, installing, testing and commissioning of addressable Active Repeater panel shall be connected to the FACP through a RS485 or fiber optic communication with necessary battery backup for 48 hrs operation. It shall be supplied with necessary interface cards for connecting to FACP. The Panel shall have minimum 2 x 40 characters back lit LCD display which will repeat all the events, alarms, messages displayed by the FACP. The panel shall be UL/EN/FM approved.
1
99001
99001
... More
Supply, installation, testing and commissioning of Analogue Addressable multi sensor smoke,heat multi criteria detector with standard base and other accessories as required. The detector shall be UL/EN/FM approved.
245
979755
3999
... More
Supplying, installing, testing and commissioning of addressable Manual call point with built in Monitor Module, all accessories etc., complete. The device shall be UL/EN/FM approved.
15
79650
5310
... More
Supplying, installing, testing and commissioning of addressable Hooter Cum Strobe at 85 dBA @ 3m for Audible annunciation and 75cd flashing at 1 Hz for visual indication with all accessories etc., complete. The device shall be UL/EN/FM approved.
15
169335
11289
... More
Supplying, installing, testing and commissioning of 2C x 1.5 sq. mm, Twisted Pair PVC insulated FRLS Armored Cable with Accessories confirming to IS standards and specifications. The quoted rate shall includes of Acrylic Fire stop Sealant in the opening for cables passing through fire compartment walls of RCC floors, masonry walls to provide up to 2 hours fire rating.
2600
291200
112
... More
Supplying, installing, testing and commissioning of approved make 20 mm dia.PVC FRLS flexible conduits on ceiling / wall / floor etc. complete with accessories like, Junction boxes, Collars, Bends etc.
200
15000
75
... More
CABLE TRAY
Supplying and installing of perforated G.I.sheet cable tray with necessary angle iron suspension supports, anchor fasteners etc. complete. Maximum height of suspension shall Not exceed 500 mm.Size of the tray is 40mm x 200mm x 40mm and 2mm thick.
35
13300
380
... More
(C) EMERGENCY EVACUATION SYSTEM/PUBLIC ADDRESS SYSTEM
Supplying, installing, testing and commissioning of 12 Watt wall mounted speakers with built in line matching transformer, grill flush mounting type in side the utility rooms.
24
47664
1986
... More
Supplying, installing, testing and commissioning solid state Amplifier of 1000 W RMS out put in rack, including necessary control wires, jocks etc. complete.
1
65740
65740
... More
Supplying, installing, testing and commissioning of P.A. Console 8 zone shall expandable up to 60 zones , with priority module micro processor based, mixing amplifier, with 6 zone for suitable selection module, power supply unit & goose neck micro phone etc.
1
175995
175995
... More
Supplying, installing, testing and commissioning of P.A. Call station of 8 zones with priority module micro processor based & goose neck micro phone etc shall be located in the reception / security for the announcement necessary communication cable/CAT 6 shall be considered from PA controller to call station .
1
29850
29850
... More
Supplying, installing, testing and commissioning of 19" Rack 650mm depth, 16U high amplifier rack assembly made of aluminum channel equivalent to euro rack system, with side and rear panels made of 14 swg powder coated sheet steel front transparent persplexdoor and with rails, rollers & bearings. Fans shall provided at the top for ventilation side panels will be ventilated type. The rack shall be powder coated of approved color and spare 'U' shall be covered with blank panels.
1
40499
40499
... More
Supplying, installing, testing and commissioning of 2 runs of 40 strand and each of 0.2 mm thick, Twisted Pair PVC insulated FRLS unarmored Cable with Accessories confirming to IS standards and specifications. The quoted rate shall includes of Acrylic Fire stop Sealant in the opening for cables passing through fire compartment walls of RCC floors, masonry walls to provide up to 2 hours fire rating.
500
16000
32
... More
Supplying, installing, testing and commissioning approved make PVC FRLS conduits on ceiling / wall / floor etc. complete with accessories like, Junction boxes, Collars, Bends etc. 20mm dia.
500
15000
30
... More
(D) CIVIL CONSTRUCTION WORKS (D-1)Const. of 100000 Ltr. Water sump. Earth work in excavation of foundation in hard soil within 50m lead and 1.5m lift including rough dressing and breaking clods to maximum 5cm. To 7cm. And laying in layers not exceeding 0.3m in depth and as per specification complete.
177.53
22706
127.9
... More
Supplying filling foundataion & plinth with sand well watered & rammed with cost, conveyance, taxes royality etc. complete.
9.26
3902
421.4
... More
Cement concrete (1:3:6) with 4cm size hard granite metal including cost, conveyance,royality,taxes,watering and curing etc. complete.
9.26
34154
3688.4
... More
Brick work with Fly Ash bricks having crusing strength not less than 75kg/cm^2 in cement motar (1:6) in F&P with cost,coveyance,royality watering&curing etc. complete.
29.33
101033
3444.7
... More
R.Cement concrete (M-20) with 12mm size hard granite chips including cost, conveyance,royality,taxes,watering and curing etc. complete. A) Raft
18.53
85056
4590.2
... More
B)Wall
18.03
131465
7291.5
... More
C) Slab
7.55
56163
7438.9
... More
Cutting,bending,binding M.S Rod for R.C.C work including placing in position and cost of M.S.Rod & binding wire etc. cpomplete.
35.6
175134
4919.5
... More
Cement concrete (1:2:4)) with 12mm size hard granite chips including cost, conveyance,royality,taxes,watering and curing etc. complete.
3
14449
4816.5
... More
2.5 cm thick grading concrete (1:2:2) with 4.7mmsize hard granite chips including cost,conveyance,royality, taxes,watering& curing etc. complete.
50.31
11375
226.1
... More
6mm thick cement plaster (1:4) over brick work with cst of all materials and all labour etc.
40
4256
106.4
... More
12mm thick cement plaster (1:4) over brick work with cst of all materials and all labour etc.
78.05
8429
108
... More
Priming 1 coat with wall primer water bond cement primer including all labour, materials, T&P etc. complete.
78.05
3153
40.4
... More
Finishing to the exposed surfaces of wall with weather coat of any approved shade on new work 2 coats to give an even shade including cost of weather coat all cost of all labours and T&P etc. complete.
78.05
4066
52.1
... More
(D-2)Storage Tank of 10000 Lts. (Above the top Roof slab) R.Cement concrete (M-20) with 12mm size hard granite chips including cost, conveyance,royality,taxes,watering and curing etc. complete. A) Column
2.45
32749
13367.2
... More
C) Bottom Slab
5.39
53990
10016.8
... More
D) Wall (0.25mt Thick)
11.04
107773
9762.1
... More
Cutting,bending,binding M.S Rod for R.C.C work including placing in position and cost of M.S.Rod & binding wire etc. complete.
12.02
59710
4967.6
... More
12mm thick cement plaster (1:4) over brick work with cst of all materials and all labour etc. (puning & skirting).
33.66
3854
114.5
... More
Priming 1 coat with wall primer water bond cement primer including all labour, materials, T&P etc. complete.
33.66
1518
45.1
... More
Finishing to the exposed surfaces of wall with weather coat of any approved shade on new work 2 coats to give an even shade including cost of weather coat all cost of all labours and T&P etc. complete .
33.66
1928
57.3
... More
(D-4) construction of Pump House for fire Fighting system of MCH Building Earth work in excavation of foundation in hard soil with in 50m lead and 1.5m lift including rough dressing and breaking clods to maximum 5cm. To 7cm laying in layers not exceeding 0.3m in depth and as per specification complete.
11.37
1454
127.9
... More
Supplying filling foundation & Plinth with sand well watered & rammed with cost,conveyance,taxes royalty etc. Complete.
10.78
4542
421.4
... More
Cement concrete(1:3:6) with 4 cm size hard granite metal including cost,conveyance,royalty,taxes,watering and curing etc. Complete.
2.7
9958
3688.4
... More
R.cement concrete(M-20) with 12 mm size hard granite chips including cost,conveyance,taxes,watering and curing etc. Complete. A) Column base
1.78
7642
4293.5
... More
B)Plinth Beam
0.78
3580
4590.2
... More
C)Column/Beam
1.25
11722
9377.8
... More
D)Lintel
0.12
852
7107.9
... More
E)Chajja
1.49
939
630.8
... More
F)Roof Slab
1.25
9298
7438.9
... More
G)Window Sill
0.03
213
7107.9
... More
Cutting,Bending,binding M.S rod for R.C.C work including placing in position and cost of M.S.Rod & binding wire etc. Complete.
5.84
28729
4919.5
... More
Brick work with Fly ash bricks having crusing strenth not less than 75 Kg/cm^2 in cement mortar(1:6) in F&P with cost,conveyance,royalty.watering & curing etc. Complete.
6.22
21426
3444.7
... More
Brick work with fly ash bricks having crusing strength not less than 75Kg/Cm^2 in cement mortar(1:6) in superstructure with cost,conveyance,royality,watering & curing etc.complete.
7.85
27303
3478.1
... More
2.5 cm thick grading concrete (1:2:2) with 4.7 mm size hard granite chips including cost, conveyance, royality, taxes, watering 7 curing etc.complete.
11.93
2697
226.1
... More
16mm thick cement plaster(1:6) over brick work with cost of all materials and all labour etc.
34.4
4760
138.4
... More
12mm thick cement plaster(1:6) over brick work with cost of all materials and all labour etc.
54.83
5340
97.4
... More
6mm thick cement plaster(1:4)over brick work with cost of all materials and all labour etc.
15.05
1601
106.4
... More
2.5 cm A.S.flooring with cement concrete(1:2:4) including punning usingg 12mm size c.b.granite chips with cost conveyance,royality,watering & curing etc.complete.
10.64
2355
221.4
... More
12mm thick cement plaster(1:4) over brick work with cost of all materials and all labour etc.
2.53
273
108
... More
Providing of M.S.Door/Window/Grill gates made out of M.S Angle flat,sheet etc. Including cost,conveyance taxes etc.complete.
124.13
8403
67.7
... More
Priming 1 coat with wall primer water bond cement primer including all labour, materials, T&P etc. complete.
104.28
4212
40.4
... More
Finishing to the exposed surfaces of wall with weather coat of any approved shade on new work 2 coats to give an even shade including cost of weather coat all cost of all labours and T&P etc. complete .
43.69
2276
52.1
... More
Priming 1 coat with wall primer water bond cement primer including all labour, materials, T&P etc. complete.
5.76
232
40.4
... More
painting two coats over coat of primer to steel surface including cost of paint and primer with cost,conveyance,taxes etc. Complete.
7.26
662
91.2
... More
Oxygen Gas Outlet Point
61
247980
4065.25
... More
Oxygen Manifold 8 + 8 With Tail Pipe & Nrv
1
156802
156802.5
... More
Oxygen Manifold 2+2 Emergency With Regulator
1
40652
40652.5
... More
Oxygen Fully automatic Control Panel
1
493637
493637.5
... More
Oxygen Flow Meter With Humdifire Bottle
42
96102
2288.15
... More
Oxygen Adopter
61
38968
638.82
... More
Vaccum Gas Outlet Point
43
174805
4065.25
... More
Vaccum Adopter
43
27469
638.82
... More
Ward Vaccum Regulator with 600ml jar
41
166675
4065.25
... More
Vaccum Pump , Cap:- 10 Hp
2
1266035
633017.5
... More
Vaccum Reciver , Cap:-1000 Ltr
1
252045
252045.5
... More
Pressure Filter
2
37051
18525.92
... More
Air Gas Outlet Point
32
130088
4065.25
... More
Air Adopter
32
20442
638.82
... More
Air Compressor , Cap:-7.5 Hp
2
1054642
527321
... More
Air Receiver , Cap:-500 Ltr
1
156802
156802.5
... More
Air Dryer ,Cap:-40 CFM
1
301990
301990
... More
Pressure Regulator
2
41697
20848.92
... More
Nitrus Gas Outlet Point
2
8130
4065.25
... More
Nitrus Manifold 2 + 2 With Tail Pipe & Nrv
1
40652
40652.5
... More
Nitrus Manifold 1+1 Emergency With Regulator
1
40652
40652.5
... More
Nitrus Semi-Control Panel
1
156802
156802.5
... More
Nitrus Adopter
2
1277
638.82
... More
Copper Pipe 12 MM X 0.7 OD
200
148672
743.36
... More
Copper Pipe 15 MM X 0.9 OD
250
300537
1202.15
... More
Copper Pipe 22 MM X 0.9 OD
510
833457
1634.23
... More
Copper Pipe 28 MM X 0.9 OD
290
610006
2103.47
... More
Copper Pipe 42 MM X 1.2 OD
50
215458
4309.16
... More
Isolation Ball Valve 12 MM
16
34566
2160.39
... More
Isolation Ball Valve 15 MM
11
27865
2533.23
... More
Isolation Ball Valve 22 MM
12
35890
2990.86
... More
Isolation Ball Valve 28 MM
10
49828
4982.83
... More
Isolation Ball Valve 42 MM
4
33265
8316.34
... More
Valve With Valve Box 2 Gas
3
82025
27341.71
... More
Valve With Valve Box 3 Gas
5
164933
32986.6
... More
Area Alarm System
8
336277
42034.68
... More
Transportation & Scafolding Charges
1
140000
140000
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to C-PVC / ASTM-D- 1785/89 (Sch-80) and pipe fittings of the following nominal borewith clamps including making good the wall , ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. IN 4thFloor -20 mm dia C-PVC pipe
30
8349
278.3
... More
25 mm dia C-PVC pipe
50
18330
366.6
... More
IN 5thF-20 mm dia C-PVC pipe
30
8601
286.7
... More
25 mm dia C-PVC pipe
50
18750
375
... More
50mm dia Pvc ASTM Pipes
40
18600
465
... More
IN 4TH FLOOR
20
7304
365.2
... More
IN 5TH FLOOR
10
3753
375.3
... More
IN 6TH FLOOR
50
19270
385.4
... More
Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar ( 1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. IN 4F
20
1092
54.6
... More
IN 5F
20
1122
56.1
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per the direction of the Engineer in charge.IN 4F
50
10550
211
... More
IN 5F
50
10980
219.6
... More
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge. (Fixtures make of Brass / G.M / C.P fittings are to be pre-approved by the E.I.C) 15 mm dia CP Bib cock with flange(Plaza/Amber/Aquatic)
15
9331
622.1
... More
15 mm dia CP Long body Bib cock with flange(Plaza/Amber/Aquatic)
2
1386
693
... More
15mm dia CP Angle stopcock(Plaza/Amber/Aquatic)
26
14690
565
... More
20mm dia CP Concealed stopcock(Plaza/Amber/ Aquatic)
2
1638
819
... More
15mm dia CP Extension Piece
45
2668
59.3
... More
15mm dia CP Flange
45
1813
40.3
... More
15mm dia CP revolving Shower with arm(plaza/Amber/Aquatic make)
2
1218
609.3
... More
15mm dia CP two way bib cock (Plaza/Amber/Aquatic)
11
10545
958.7
... More
15mm dia CP Health faucet(Plaza/Amber/Aquatic) .
11
6111
555.6
... More
125mm CP grating
30
2523
84.1
... More
32mm dia brass fullway valve(Shakti Make)
8
10871
1358.9
... More
25mm dia brass fullway valve(Shakti Make)
20
18564
928.2
... More
40mm dia brass fullway valve(Shakti Make)
8
13802
1725.3
... More
50mm dia brass fullway valve(Shakti Make)
8
20436
2554.5
... More
Supplying all materials, labour T&P and and fixing 10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main etc all complete as per the specification and direction of the Engineer in charge. 10 Liters capacity PVC cistern with 32mm dia flush bend
13
19580
1506.2
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method /as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. 110mm diameter U-PVC SWR pipes (Ashirbad/ supreme)
88.58
40640
458.8
... More
75mm diameter U-PVC SWR pipes
40
12164
304.1
... More
75mm dia U-PVC plain Bend
5
920
184
... More
75mm dia U-PVC Door bend
5
1125
225.1
... More
110mm dia U-PVC door Tee
10
3860
386
... More
110mm dia U-PVC plain Tee
10
3227
322.7
... More
110mm dia U-PVC Door bend
10
2936
293.6
... More
110mm U-PVC Socket Plain
15
2401
160.1
... More
110mm dia PVC SWR Clamp/Clip.
20
856
42.8
... More
110mm U-PVC Vent Cowl
10
582
58.2
... More
Supplying all materials ,labour ,T&P and fixing Wash basin with hole for pillar taps with cast iron or MS brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. fixing pedestral for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin , fixing 12mm dia CP brass waste etc.all complete as per specification and direction of Engineer-in-charge.
Wash hand Basin Fixing 550mmx400mm size wash hand basin with pedestal
13
51075
3928.9
... More
Supplying all materials , labour, T&P and fixing Vitreous china water closet ,squatting pan ( Indian type W.C. pan / Orissa pattern squatting pan ) duly embedded in cement concrete 1:5:10 using hard granite metal 4cm nominal size including fixing a pair of vitreous china 250mmx130mmx30mm foot rest, fixing 100mm dia hci 'P' or 'S' trap for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge. 580mmx440mm size Orissa pan
2
4744
2372.1
... More
Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge. European water closet with 'S' trap plain (Parryware / Hindware / Cera Make) Hindware Make Cat No.20079
11
35731
3248.3
... More
Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. 25mmx600mm long CP towel rail
2
1402
701.4
... More
CP Towel ring
13
6091
468.6
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted minimum 5m thick on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer in charge. Mirror(Bevellededge) 600mmx450mm
13
8716
670.5
... More
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to woden plugs with CP screws as per specification and direction of the Engineer in charge. 600mmx125mm glass shelf with CP/NP guard rails
13
7842
603.3
... More
Supplying all materials ,labour ,T&P and fixing CP Soap Holder complete with CP brass brackets fixed to wooden plugs with chromium plated brass screws etc.all complete as per specification and direction of Engineer-in-charge. CP soap holder
28
5031
179.7
... More
Supplying all materials, labour, T&P and filling in sunken floor in toilets with cinter (light weight slag) well watered and rammed include conveyance of all materials to worksite payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.IN 4F
9.06
5035
555.75
... More
IN 5F
7.12
3956
555.75
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork with cement punning for skirting including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn 4THF
9.68
1787
184.7
... More
IN 5F
7.91
1492
188.7
... More
Supplying all materials ,labour , T&P and applying Sika top seal 107 / Pidifin 2K of Doctor Fixit brand including cleaning the surface by means of broom and washing with water jet for removing all foreign materials from the surface , mixing the Sika compound top seal /Pidifin with proportion(1:4)by mechanical means, applying the mixture on the surface by brush including cost of all materials,all taxes , conveyance of all materials to work site etc. all complete. as per direction of the Engineer-in-charge.Same as CP 4F
9.68
8108
837.7
... More
IN 5F
7.91
6626
837.7
... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12m size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.in 4th floor
2.26
19042
8425.8
... More
IN 5F
1.78
15984
8980.3
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge in 4F
144.14
25498
176.9
... More
IN 5F
117.04
21160
180.8
... More
Supplying all materials, labour, T&P and providing and fixing of porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( Porcelain wall tiles of Kajaria / Johnson / Somany make) conforming to IS 13753 of size 45cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge) IN 4F
124.79
121370
972.6
... More
IN 5F
101.23
100349
991.3
... More
Supplying all materials, labour, T&P and providing and fixing of porcelain tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge (porcelain floor tiles of Kajaria / Johnson / Somany Make) conforming to IS 13755 of size 30cmx30cm special printed series to be pre-approved by the Engineer-in-charge) IN 4F
30.21
29240
967.9
... More
IN 5F
23.77
23304
980.4
... More
Supplying fitting and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of MS tube of 19 gauge thickness and size of 19mmx19mm for stile & 15mmx15mm for top and bolt rails set with PVC door frame(Choukatha)of size 50mmx47mm is made out of 5cm thick sheet properly joined with solvent cement adhesive as per section view with MS square tube of 19mm of 19mm gauge to be inserted inside to give extra structural strength the price is inclusive of all cost of all materials labour,T&P etc.complete in all respect as per direction of the Engineer-in-charge. Solid PVC DOOR=0.75*2.1*15
23.63
77489
3279.3
... More
Supplying all materials,labour,T&P and laying in trenches ( to level or slope ) unplasticized PVC pipe conforming to IS:4985/2000 of the following outside dia for class-3 (0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/ as per manufactures's providing and laying in trench cement concrete(1:4:8) with 40 mm size hard granite metal in the Type-C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer-in-charge. 110mm dia U-PVC pipe (Allround concrete )
25
30220
1208.8
... More
160mm dia U-PVC pipe (Allround concrete )
15
29674
1978.3
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1½:3)with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
16.76
172931
10318.1
... More
Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage.
16.76
154394
9212.1
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor. RCC floor roof, chajja etc
46.25
56619
1224.2
... More
RCC Beam, Column, wall etc
92.45
202937
2195.1
... More
Supplying all materials, labour,T&P and providing 6mm thick cement plasster (1:4) over CC work including watering curring and conveyance of all materials to site.
52.2
9964
190.9
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site.
52.1
1984
38.1
... More
Supplying and fitting and fixing stainless steel 34 grade in said rail using 5mm dia 2mm thick circular pipe and balustrade 32mmx32mmx2mm at the rate of mtr.Center to center and square pipe 32x32x2mm below including welding with stanless steel elect rod and fixing with necessary accessories etc.complete as per direction of the Engineer-in-charge.
60
19422
323.7
... More
Providing fitting and fixing MS cover made out of MS angle and sheet duly welding and fixing with frame and hinges along with locking arrangement of size 60cmx60cm etc complete as per direction of Engineer-in-charge
40
3160
79
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements