Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 3,36,300Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_EICCL_99643_3Tender No
CCE R and B Rgda- 17/23-24Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing and fixing of Fixed Glazing with part Top hung of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS-513 of 0.6 mm thick “D” quality, galvanized as per IS-277 with zinc of 120Gm/Sq.mtr) with paint specification being with primer of 5-7 microns and finished paint with polyster paint (Black /Pearl white/ Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46x70 mm and fixed beadings are of 18x25 mm. Top hung shutter should be of 46 x 46 mm. Accessories / gaskets are to be used as per the manufacturer’s supply and specification like handle being made of high grade aluminium powder coated and with nylon receiver and gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating.The mullion caps and louvered-clips should be of glass filled nylon. The sections are to be cut to length ,mitre joined with corner bracket and frames are fixed to the concrete/masonry walls by means of self expanding screws and glass to be used of 5mm reflective with all taxes complete.
458.78
1174647
2560.35
Providing and fixing steel work welded in built up section framed (including MS Angle, plate,Sq bar, Flat,MS Tubular section, heavy type hinges) work including cutting histing, fixing in position and applying a priming coat of approved steel primer, two or more coats of synthetic enamel paint with approved make and brand in grating frames, guard bar, ladder railling for balconies and staircase etc including cost of all labour and T&P for the works etc. complete as directed by the Engineer-in-charge.
9393.53
976269
103.93
Providing, and fixing 150mm dia GI Pipe (Tata Medium) section for Cow Catcher including cost, conveyance, royalty and taxes of all materials with all labour with T&P required for the work etc. complete.
60
105305
1755.09
Landscaping Portion
Supplying and stacking & speareding of good earth at site including royalty and carrage up to 5 KM (earth measured in stacks will be reduced by 20% for payment) 300mm th. (Provisional) including cost, conveyance, royalty and taxes of all materials with all labour with T&P required for the work etc. complete.
292.5
146799
501.88
Supplying and stacking sludge at site including royalty and carrage up to 5 KM (sludge measured in stacks will be reduced by 8% for payment). (Provisional) including cost, conveyance, royalty and taxes of all materials with all labour with T&P required for the work etc. complete.
292.5
105662
361.24
PLANTATION
Grass Providing and fixing Neelgiri/Mexican grass turf with earthy 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light, watering with sprinkler and maintenance for 30 days or more till the grass establish properly as per direction of officer incharge.
1300
268801
206.77
Providing, and finishing wall and ceiling surface with water based wall putty including cost, conveyance, royalty and taxes of all materials with all labour with T&P required for the work etc. complete.
6399.17
452741
70.75
Painting Two coats with any approved Plastic Emulsion paint to new works over a coat of primer to make an even finishing surface in all floors ceilling surface of approved make including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
5540.9
864269
155.98
Painting Two coats with any approved Plastic Emulsion paint to new works over a coat of primer to make an even finishing surface in all floors ceilling surface of approved make including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
First Floor
5540.9
882720
159.31
Providing supplying fitting and fixing of Vitrified Tiles of size 600mmx600mm in floor on 20 mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing including fixing tiles to proper slope and level mending to sizes including cost, conveyance, royality, taxes all materials all labopur and T&P required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge.
Ground Floor
609.86
660149
1082.47
Providing supplying fitting and fixing of Vitrified Tiles of size 600mmx600mm in floor on 20 mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing including fixing tiles to proper slope and level mending to sizes including cost, conveyance, royality, taxes all materials all labopur and T&P required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge.
First Floor
600
655908
1093.18
Providing supplying fitting and fixing of Vitrified Tiles of size 600mmx600mm in dado on 12 mm thick bed of cement mortar (1:3) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing including fixing tiles to proper slope and level mending to sizes including cost, conveyance, royality, taxes all materials all labopur and T&P required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge.
Ground Floor
600
654312
1090.52
Providing supplying fitting and fixing of Vitrified Tiles of size 600mmx600mm in dado on 12 mm thick bed of cement mortar (1:3) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing including fixing tiles to proper slope and level mending to sizes including cost, conveyance, royality, taxes all materials all labopur and T&P required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge.
First Floor
600
663984
1106.64
Providing supplying fitting and fixing of Granite tile on 25 mm thick cement mortar (1:1) and filling joints with white cement of approved quality including cost, conveyance, royality, taxes all materials all labopur and T&P required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge.
Ground Floor
38.15
96678
2534.16
Providing supplying fitting and fixing of Granite tile on 25 mm thick cement mortar (1:1) and filling joints with white cement of approved quality including cost, conveyance, royality, taxes all materials all labopur and T&P required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge.
First Floor
35
89070
2544.87
Dismentaling or removing old lime or cement plaster from brick or stone masonery walls and racking out joints 12 mm deep including stacking the useful materials for reuse and removing the debris with in 50m lead including cost, conveyance, royality, taxes all materials all labopur and T&P required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge.
637.6
28035
43.97
12mm thick cement plaster in cement mortar (1:6) finished smooth to brick walls after raking out the joint including watering and curing with cost and conveyance of all materials and labour with T& P required for the work with all taxes and royalities etc. complete in all respect as per direction of Engineer in charge.
1323.83
203882
154.01
16mm thick cement plaster (1:6) finished smooth to inside 9''/10'' thick brick walls after raking out the joint including watering, curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect as per direction of Engineer in charge.
243.62
53591
219.98
12mm thick cement plaster in cement mortar (1:6) finished smooth to brick walls after raking out the joint including watering and curing with cost and conveyance of all materials and labour with T& P required for the work with all taxes and royalities etc. complete in all respect as per direction of Engineer in charge. First Floor
200
32012
160.06
16mm thick cement plaster (1:6) finished smooth to inside 9''/10'' thick brick walls after raking out the joint including watering, curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect as per direction of Engineer in charge. Second Floor
220
49585
225.39
Dressed seasoned sal wood work framed and fixed in frames of doors, windows and ventilators including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
0.82
64899
79338.74
Supplying, fitting and fixing of 32 mm thick Flush doors made out of 30 mm thick Block Board of approved quality including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
52.29
672742
12865.61
Earth work in excavation of foundation in all kinds of soil with all leads & lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site with dressing and levelling the bed and depositing the excavated earth at places away from work site and stacking of useful materials near by the work site with all leads and lifts including cost of all labour and T&P for the works etc. complete as directed by the Engineer-in-charge.
2551.23
538233
210.97
Filling in foundation and plinth with excavated materials in trenches, plinths, sides of foundation etc in layers not exceeding 15cm depth with in lead of 50.00 mtr and initial lift of 1.5 mtr including cost of all labour and T&P for the works etc. complete as directed by the Engineer-in-charge.
1669.97
195820
117.26
Sand filling in foundation trenches and plinth with dicthes with sand well watered and rammed in layers not exceeding 23cm in depth with all lead and lift including cost convayance loading unloading royality and taxes of all materials including cost of all labour and T&P for the works etc. complete as directed by the Engineer-in-charge.
498
323038
648.67
Providing GSB Gr-iv materials, spreading in uniform layers with motor grader, mixing by mix in place method at OMC and compacting with vibratory roller to achieve the desired density including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Clause - 401 of MoRT&H Specifications for Road & Bridge works including cost, conveyance, royalty and taxes of all materials, all labour with T&P required for the work etc. complete as per technical specification and direction of Engineer-in-Charge.
1011
2368570
2342.8
Providing, laying, spreading & compacting graded stone aggregate to wet mix macadam specification including premixing the material at OMC in mechanical mix plant, carriage of mixed material to site, laying in uniform layers on well prepared surface & compacting to achieve the desired density including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Clause -406 of MoRT&H Specifications for Road & Bridge works, including cost, conveyance, royalty and taxes of all materials, all labour with T&P required for the work etc. complete as per technical specification and direction of Engineer-in-Charge.
505.5
1273860
2520
Cement concrete of prop.(1:3:6) in foundation up to lowest bed level using hard black granite crusher broken metal of size 40 mm size down graded of approved quality from approved quarry as per approved design including hoisting,lowering,laying compacting concrete in layers not exceeding 6” thick, watering, curing for three weeks shuttering the exposed surfaces, finished smooth, providing grooves of beads where necessary including cost, conveyance, royalty, & taxes of all materials, with labour, T&P required for the work etc., complete in all respects including dewatering if required as per direction of Engineer-in-Charge.
423.19
2175689
5141.19
Cement concrete of prop.(1:4:8) in foundation up to lowest bed level using hard black granite crusher broken metal of size 40 mm size down graded of approved quality from approved quarry as per approved design including hoisting,lowering,laying compacting concrete in layers not exceeding 6” thick, watering, curing for three weeks shuttering the exposed surfaces, finished smooth, providing grooves of beads where necessary including cost, conveyance, royalty, & taxes of all materials, with labour, T&P required for the work etc., complete in all respects including dewatering if required as per direction of Engineer-in-Charge.
68.63
326764
4761.32
Providing, lifting hoisting and laying Reinforced Cement concrete of M 25 grade as per approved design and drawings having a minimum compressive strength of 25 kg/square cm in 15cm cubes at 28 days after mixing and test conducted in accordance with IS 516 using 12mm to 20mm size black hard xrushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry washed and cleaned to be mixed in concrete mixture with portland slag cement including hoisting lowering laying and compaction concrete by using vibrators watering and curing for 28 days including cost, conveyance, royalties, taxes of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in –charge.
Base
588.71
3542344
6017.14
Column
52.6
852889
16214.94
Plinth Beam
22.47
161517
7187.49
Roof Beam
38.1
617837
16214.94
Slab
11.83
150985
12760.74
Painting Two coats with any approved Synthetic Enamel paint to Iron works over a coat of primer including sand papering, polishing the surface including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
471.05
102551
217.71
Supplying fitting and placing uncoated HYSD Steel reinforcement works using HYSD (FE-500) steel of approved manufacturer as per section 1600 §ion 1900 of MORT&H specification for Road and Bridge works including cost, conveyance and taxes of all materials, binding wires 18 to 20 gauge and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. (weight of reinforcement sall be calculated on the basis of IS 1732. wastage, overlaps, couplings, welded joints, space bars, chairs, stays, hangers and annealed steel wires or other method of binding & placing shall not be considered for payment)
348.45
3089629
8866.83
Fly ash brick masonry in cement mortar (1:6) in Superstructure using Fly ash bricks of “23cmx11cmx8cm" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge.
Ground Floor
242.02
1228533
5076.08
Foundation and Plinth
72.42
365180
5042.75
providing and laying of 80mm thick cement concrete interlocking paver block of M-30 grade and of approved make, variety , cour and size mabe by block making machine with strong vibratory compaction of approved design and shape laid in requied colour and pattern over 50mm thick compaction bed of coarses filling the joint with fine sand etc all complete including cost, conveyance, royalty, taxes of all materials all labour, T&P etc. complete in all repsect as per direction of the Engineer-In charge
2020
1228968
608.4
Providing and laying at near ground level factory made KERB Stone of M20 graded cement concrete in position to the required line level and curvature jointed with cement mortar 1:3 including making joints with or with out groove including cost, conveyance, royality, taxes all materials all labopur and T&P required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge.
First Floor
10.25
47155
4601.86
Dismetalling brick or stone masonary in lime or cement mortar above 3m height incliding stacking the useful materials for reuse and removing the debris with in 50m lead including cost, conveyance, royality, taxes all materials all labopur and T&P required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge.
41.4
50838
1227.99
Dismetalling and removing RCC columns beams slab anr staircase landing lintels incliding stacking the useful materials for reuse and removing the debris with in 50m lead including cost, conveyance, royality, taxes all materials all labopur and T&P required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge.
56.75
73566
1296.23
Removing and disposal of unuseful materials debris and excavate earth soil with in 5 km lead all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect as per direction of Engineer in charge.
61.7
17030
276.01
6mm thick cement plaster (1:4) finished smooth to inside thick brick walls after raking out the joint including watering, curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect as per direction of Engineer in charge.
92.83
15852
170.77
Painting Two coats with any approved Plastic Emulsion paint to new works to make an even finishing surface in all floors ceilling surface of approved make including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
Security Shed
116.45
10379
89.13
Supplying fitting and fixing up window sliding type made up aluminium section 151-154, 151-155 as windows frame section no. 151-155, 151-153, 151-157 as shutter frame with 5mm thick reflective gllass as panel fitted with rubber beading including locking arrangements including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
3.24
13815
4263.9
Supplying, fitting, fixing of all types of MS Grills made of ISI marked standard MS Angles of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings, including mending to sizes supplying and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
81
5204
64.25
E.I Works
Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/ Polycab/ HAVELLS/RR KABLE/KEI or equievalant reputed make A catagory ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Havells or equievalant reputed make A catagory ISI marked as approved 6A modular type (anti bactorial & falme retradant type) switch ISI marked Make-Schneider (Zencelo)/ legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) (anti bactorial & falme retradant type) Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved of suitable size, modular box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. Group-A. L.P.- 20 F.P.- C.B.-
20
11360
568
Group-B. L.P.- 145 F.P.- 45 C.B.-
79
63911
809
Group-C L.P.- 35 F.P.- 30 C.B.-4
69
76866
1114
Recessed wiring for 5/6Amp modular Socket outlet with 2x1.5mm2 FRLS/FRLSH PVC insualted single core multistand copper conductor of ISI marked in recess 20mm dia Non-metalic PVC flexible conduit with piano type switch,phenolic laminated sheet suitable size ISI marked on modular GI box and earthing point with 1x1.5sqmm FR PVC insulated single core multistand copper conductor for loap earthing etc.as required(make of wire-Finolex/L&T/Anchor/ Havels/V-Guard/Polycab) . Group-A.
20
11340
567
On Existing board.
25
5475
219
Recess wiring for circuit/submain wiring with the following mentioned size PVC FRLSH/LSZH insulated, copper conductor, single core cable (Finolex/Anchor/Polycab/ HAVELLS/RR KEBLE) or equievalant reputed make A catagory ISI marked as approved, in recessed PVC conduit Heavy duty FRLS of mentioned size (AKG/Anchor/Kinjal or equievalant ISI marked as approved) as required as per direction of Engg.-in-Charge. a)a)1x1.5mm2(1.19.2.SOR-17) Inverter wiring
195
9555
49
b)2x2.5mm2+1x1.5mm2(1.8.2.SOR-17)
585
86580
148
c)2x4mm2+1x1.5mm2 (1.8.3.SOR-17)
125
20625
165
e)2x6mm2+ 2x2.5mm2(1.8.8.SOR-17)
210
41160
196
S/F of 20W/18W LED batten light of crompton(slim LINEA /Dazzle ray)/ Havells/ Panasonic or Equivalent make.
80
55280
691
S/F.of 9W/10Wt.LED lamps of Havels/Crompton make or Equivalent make
18
2772
154
S/F of B.H fitting energy saving,surface mounted decorative round plastic bulk head 1x10Wt LED luminaires comprising high brightness LED with IP54 protection.Havells Make.(ELIPSE ROUND/ ELIPSE OVAL/Rugby) as per direction of Engineer-in-charge.(terrace-2nos.)
2
3110
1555
S/F.of 48"A.C.Ceiling fans complete with ISI marked (Havells (SS390 metallic/Havells SS390 DeCo) Usha Allure)/ Orient(Jazz/summer pride).Make or Equivalent make including all accessories & connection as per direction of Engineer-in-charge.
55
141240
2568
Supplying and fixing of stepped type modular regulator of ISI marked(ROMA/Crabtree/L&T/ Legrand)or equivalent make on Modular G.l. box of 18 SWG on surface or in recess with suitable size Modular base & cover module in front including providing and fixing connection, painting etc as required.
54
23490
435
S/F of 300mm metal exhaust fan with wall cutting including all accessories of USHA(Aero clean)/Bajaj(Bahar)/Crompton (Drift Air) make & connection as per direction of Engineer-in-charge.
8
15000
1875
S/F of Modular computer board with 2nos. Of modular SP switch and modular socket
15
15720
1048
S/F.of Computer board consisting of 4Nos 5/6AMP modular socket & modular switch including suitable size of GI modular box and modular base &cover (ROMA/ Crabtree/ Havells/L&T or equivalent make)complete with connection as per the direction of Engineer-in-Charge.
10
15150
1515
S/F of Modular Multipurpose board with 1nos. Of 15/16A & 6/6A modular SP switch and modular socket ncluding suitable size of GI modular box and modular base &cover (ROMA/ Crabtree/ Havells/L&T or equivalent)complete with connection as per the direction of Engineer-in-Charge.
10
12180
1218
Supplying and fixing Modular G.l. box of 18 SWG on surface or in recess with Modular base & cover for module in front including providing and fixing 6pin 15/16Amp modular socket outlet and SP 15/16Amp oneway modular switch (Power Plug) with indicator connection, painting etc as required.
3
1794
598
S/F of suitable size Modular G.l. box for surface or in recess with Modular base & cover in front including providing and fixing of 6pin 15/16Amp modular socket outlet with 20/25AMP SP MCB of (Hager/L&T/Legrand make) connection, painting etc as required.A.C
8
5704
713
Supplying and fixing of Modular G.l. box for suitable module on surface or in recess with Modular base & cover and blanking plate ( if required) in front including providing and fixing of 25AMP DOL starter (ROMA/ Crabtree/Havells make) of modular type switch, connection, painting etc as required as per the direction of Engineer-in-Charge.
8
5128
641
S/F of 8 way Double door D. Box (Havells/L&T/Hager) with 63Amp TP,5x(6-32Amp)SP MCB of Havells/L&T/Hager make including all accessories and connection as per direction Engineer-in-Charge..(For Lift)
3
14928
4976
of S/F of 12 way Double door D. Box (Hager/ L&T/ C&S/Legrand ) with 63Amp TP MCCB ,9x(6-32Amp)SP MCB of Hager/ L&T/Legrand/C&S or Equivalent make make including all accessories and connection. as per direction Engineer-in-Charge.
5
36005
7201
S/F.of Special earthing complete with provision of 600x600x3mmthick or (2ft x 2ft) copper plate, 38/40mm dia 3mtr long G.I.pipe , 25x3mm thick Cu.flat charcoal and salt,funel,earthpit chamber with masonary work including all accessories and connection as per direction of Engineer-in-charge(1 for panel & 2 for Lift).(6 for LA)
2
25244
12622
Supplying and laying 25 mm x 6 mm CU earth strip ISI marked on surface or in recess for connection etc as required including suitable insulator with proper arrangement and connection as per direction of E.I.C
25
13725
549
S/F of Jeta Adorn 200W Focus light LED luminaires comprising high brightness LED with IP54 protection.Make-Havells(Hexa) or Equivalent model of philips/Crompton
4
49664
12416
S/F of Gazella High Bay 80W LED luminaires comprising high efficiency & high brightness LED with IP54 protection.Make-Havells(Hexa) or Equivalent model of philips/Crompton
6
60180
10030
S/F of 1x15W 5700K surface /Recessceling LED light made up of pressure die cast housing with secondary optics ,IP66 protection Havells make(ENDURA NEO DL SURFACE/INTEGRA NEO SURFACE) /INTEGRA NEO/GRAND/HE/ EDGE PRO ROUND/SQUARE// Crompton( CROM ROUND/SQUARE) OR Equivalent model of Philips make as per direction of Engineer-in-Charge.
135
183735
1361
P/F of 6 SWG G.I. wire on surface or in recess for loop earthing along with existing surface/recessed conduit/ submain wiring/cable as required((To be connected to DBs)
15
227
15.15
Fabrication of 250Amp Sub-Panel board size 60"x48"x12" with powder coat made out of SWG CR sheet with designing with (i) 200A porcelain kitkat fuse(3 nos) ISI marked (ii)160A , 25kA, 4P MCCB Adjustable thermal & magenetic Legrand/ L&T/ & Hager Make.-1 nos. (iii)63A, 4P, 25kA MCCB fixed thermal & fixed magenetic hager/make/L&T/Legrand or Equivalent make .-2Nos. (iii)63A, 4P MCB C- Series Legrand / Hager / L&T Make. - 4 Nos. or Equivalent (iv)40AMP, DP MCB C- Series Legrand / Hager / L&T Make. - 4 (v) 250A TPN Cu. Busbar 35mm*10mm (vi) S/F.of Digital Voltmeter,Ammeter, Selector switches CT coil and Indicator lamp RYB with toggle switch etc. -1 set or Equivalent (vii)Internal wiring of the Panel suitable copper flat 7/20mm2 SC FR copper cable with colour. (viii)Fixing charges of Panel with RCC foundation base with MS Angle nuts & bolts.
1
73115
73115.5
Supplying, installation testing and commissioning of 9 MTR galvanized PU painted octagonal pole with 100W Stereet light, 6 A MCB, Connector with all other wiring material.Pole with top dia - 70 MM ,Bottom dia - 155 MM, PCD- 250 MM, thickness 3.1 mm with foundation bolt and decorative bracket of 1 MTR long suitable for holding 1 nos 100W LED street light . The pole design must suitable for wind speed as per IS 875. IS 2062 grade E350 / BS EN 10025 S355 .Low Silicon (≤ 0.06%) High Tensile Steel Sheet as per IS 2062 / BS EN 10025 Or Equivalent. Hot Dipped Galvanized, as per BS EN ISO 1461 Average coating should be 55 microns. E250 Grade as per IS 2062 of Make(Bajaj Cat no:BOP 9030 or equivalent of Klite/ Valmount)100W LED street light with Epoxy powder coated pressure die-cast aluminium housing and LED driver cover with silicon gaskets provided for LEDs and control gear compartments. LEDs Must have with non-yellowing secondary lens optics. The driver used is specially designed to have built-in surge voltage, open/short circuit protections.External surge protection of 10 KV provided for additional safety. Side entry mounting for 55 to 60mm OD pipe bracket. Top maintenance: Access to driver is from the top. The fixture must have 12000 LM with peak power consuption of 100W. The lighting fixture must deliver avg. 25 Lux of 6 MTR road (make:Bajaj Model No. ENXT P 120L WH or Equivalent of Philips/ lighting technologies catagory ISI marked as per direction of Engineer in charge .
14
551054
39361
Supply & Installation of GATE LED Light of make BAJAJ (CAT: BGCL 40W LED WH) & or Equivalent of Philips/ lighting technologies catagory ISI marked as per direction of Engineer in charge .
4
35688
8922
Feeder piller for external Lighting Supplying installation testing commissioning if doubledoor feeder pillar fabricated out of 2 mm thick CRCA sheet duly painted, 200 copper busbar with neutral bus rincluding cc/ brick foundation as required including following internal fixtures. 1 No - 40 Amp 4P MCB Incomer 8 Nos - 16 Amp DP MCB Outgoing 1 No - 16 Amp SP MCB with 6/16 Amp socket outlet with 10 Amp modular switch and 1 No- Bracket Holder with 6 Amp Modular switch. L&T/Legrand siemens/Schnieder or Equivalent make)
1
20598
20598
S/F of 25 sq.mm 3&1/2 Core Alluminium, armoured LT power Cable of XLPE insulated 650/1100 grade(make-Havells/Polycab)
75
15075
201
S/F of 10 sq.mm 2 Core Alluminium, armoured LT power Cable of XLPE insulated 650/1100 grade(make-Havells/Polycab)
275
31350
114
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size direct in ground including excavation (75 cm),sand cushioning,protective covering and refilling the trench etc as required upto 35 Sqmm
300
66600
222
Supply of 16M high mast shaft in two section suitable for IS875 wind speed along with head frame, luminaires carriagesuitable for 08 luminaires in symmetrical arrangement andother accessories manufactured in factory.
1
238854
238854.34
Supply of raising lowering system comprising double drumwinch, 5mm diameter SS wire rope, trailing cable, connectorintegral power tool motor, manual handle, junction box,lightning finial. (Wiring material from JB to individual luminaire& MCB in base compartment are not included and are a partof installation)
1
93320
93320.72
Supply of foundation bolts manufactured from special steelalong with nuts, washers, anchor plate and common template
1
6234
6234.93
Supply of LED floodlight 300 W
8
167256
20907
Supply of LED type single dome aviation obstruction light
1
3484
3484.5
S/f.of Standard earthing with G.I.earth pipe 4.5m long 40mm dia including all accessories (With charcoal and salt) with masonary enclosure with coverplate having locking arrangement (Sl.No.5.2.of DSR2022) as per direction of Engineer-in-charge.
6
41130
6855
P/F of 6 SWG G.I. wire on surface or in recess for loop earthing along with existing surface/recessed conduit/ submain wiring/cable as required((To be connected to DBs)
220
3333
15.15
CCTV WORK Supply and Installation of Indoor Dome IR Network Camera (1/3" CMOS sensor,mini,pixel of 2048*1536 or higher video quality,frame rate of 20fps @ 4MP,H.264,H.264_High profile &MJPEg video compression,3.6mm Fixed lens,Physical ICR filter of both day and night,30mtr IR Distance,digital WDR range,3D-DNR for noise reduction,IPv4/IPv6 network supported,IP67 rated for weather proofing,ONVIF ver 2.2 or higher,POE IEEE 802.3af,UL,FCC,CE,ISO certified).Make: W BOX/ Pelco / Honeywell.
9
215343
23927
Supply and Installation of Outdoor Bullet IR Network Camera (1/3" CMOS sensor,mini,pixel of 2048*1536 or higher video quality,frame rate of 20fps @ 4MP,H.264,H.264_High profile &MJPEg video compression,3.6mm Fixed lens,Physical ICR filter of both day and night,30mtr IR Distance,digital WDR range,3D-DNR for noise reduction,IPv4/IPv6 network supported,IP67 rated for weather proofing,ONVIF ver 2.2 or higher,POE IEEE 802.3af,UL,FCC,CE,ISO certified).Make: W BOX/ Pelco / Honeywell.
8
191416
23927
Supply and Installation of 32Ch 4K Network video Recorder added with 32TB Hardisk storage.Make: W BOX/ Pelco / Honeywell )
1
348026
348026
Supply and lying of 4-pair Cat6 UTP cable for camera connectivity in existing conduits.Make:Finolex, D- Link, Secureye.
400
21600
54
Supply and Installation of 24port IEEE 802.3af and at POE 10/100/1000Mbps managed Switch with minimum Two combo ports with minimum PoE power budget of 375W per switch. Make: Cisco/D Link/Secureye.
1
33715
33715
Supply and Installation of 32" Commercial Display.Make: Samsung/LG/Panasonic
1
27190
27190
AUTOMATIC FIRE DETECTION SYSTEM Supplying, installation, testing and commissioning of Addressable Multi Detector(Smoke cum Heat) complete with base and isolator as per direction of Engineer-in-charge.
37
150331
4063
CONTROL PANEL :- Providing S.I.T.C of Microprocessor based Addressable Fire Alarm Control Panel (2 Loop) suitable for serving the followingg detectors & Devices in maximum with LCD display, complete with) 2 Nos 12 Volt 40 Ah SMF battery, Battery backup and also provision for 2 Nos potential free Normally open contact per loop to be used for interlocking of AHUs in the event of fire as per direction of Engineer-incharge.(Make:Morley/ Bosch/ Notifire)
1
244699
244699
MCP : Supplying, installing ,testing and commissioning of break glass type Manual call point . The Manual call point with monitor module shall be single stage type with all accessories and suitable sinages complete., the Manual call point shall be as per technical specification. and shall be of EN and LPCP listed.
3
12372
4124
Electronic Hooters :- Supplying, installing ,testing and commissioning of Hooter Cum Strobe at 85 dBA @ 3m for Audible annunciation and 75cd flashing at 1 Hz for visual indication. With Control Module. The Hooter cum Strobe with Control Module shall be flush or surface mountable type with all accessories etc., complete and as per technical specification. The devices shall be of EN and LPCP listed (Make: Bosch or Equivalents)
3
22530
7510
Wiring Supplying and drawing of 2X1.5 sq.mm PVC insulated PVC Sheathed FRLS cable in the existing surface/ recessed conduit with all accessories as per direction of Engineer-in-charge.
300
33600
112
Supply, delivery and laying of following sizes of Steel Conduit in surface/ in recess alongwith other accessories and 18 swg GI wire complete for Fire Alarm wiring including painting as required and as per direction of Engineer-in-charge. 20mm dia
150
18900
126
25mm dia
50
7350
147
Supplying, installing, testing and commissioning of P.A. Controller 16 zone , with priority module micro processor based, mixing amplifier, with 6 zone for suitable selection module, power supply unit & goose neck micro phone etc.Make:Honeywell/Bose/Bosch/Eq.
1
170000
170000
Supplying, installation, testing & commissioning of digital audio amplifier 480 Watt, 25V rms operating at 240 Volt AC Supply complete as required.
Make:Honeywell/Bose/Bosch/Eq.
2
103600
51800
Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/15 Watt in ABS enclosure complete as required .
Make:Honeywell/Bose/Bosch/Eq.
25
49800
1992
Supplying, installing, testing and commissioning of 19" Rack 650mm depth, 16U high amplifier rack assembly made of aluminum channel equivalent to euro rack system, with side and rear panels made of 14 swg powder coated sheet steel front transparent persplexdoor and with rails, rollers & bearings. Fans shall provided at the top for ventilation side panels will be ventilated type. The rack shall be powder coated of approved color and spare 'U' shall be covered with blank panels.
1
35600
35600
Supplying and drawing of speaker cable Single pair, 2-core, 1.5 sqmm in existing conduits.Make-Polycab/Havells/Finolex/Eq.
1788
115933
64.84
PH Works
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20mm dia C - PVC pipe Ground Floor
50
13930
278.6
25mm dia C - PVC pipe Ground Floor
30
11403
380.1
32mm dia C - PVC pipe
30
17214
573.8
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)
20
17226
861.3
15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make)
8
10040
1255
15 mm dia CP S.B. Bib cock(CON-CHR-037KN)
6
6496
1082.8
15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make)
5
5783
1156.6
25mm dia brass full way valve (Shakti make)
4
4796
1199.2
32mm dia brass full way valve (Shakti make)
4
7020
1755.1
15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make)
8
13189
1648.7
15mm CP Extension piece
39
2051
52.6
125mm CP grating
8
632
79.1
15mm size C.P. flange
39
3018
77.4
Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 2000 liters capacity PVC water storage tank roof of 1st floor
1
41791
41791.1
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.
Ground Floor
6
306
51
Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge
Ground Floor
4
682
170.5
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
Ground Floor
50
9255
185.1
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
42.05
20415
485.5
110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)
6
2983
497.3
110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
7
2055
293.6
110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
7
1624
232
110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
3
1222
407.4
110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
14
814
58.2
110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make)
4
1828
457.1
110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
4
1290
322.7
110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make)
5
2756
551.2
110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make)
5
1930
386
110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
30
4803
160.1
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
580mm size Orissa pan (Hindware/Parryware/Neycer make)
4
14460
3615
Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
12
27046
2253.9
Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal
4
23238
5809.5
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
European water closet with 'p' trap plain(Hindware/Parryware/Neycer make)
8
24840
3105.1
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
550mmx400mm W.H.basin (Hindware/Parryware/Neycer) make with pedestal
5
30125
6025.1
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
600mmx450mm size B.E mirror (swivelled type)
5
3648
729.6
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
CP soap holder
5
1264
252.8
Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
6
1213
202.2
Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
6
717
119.5
Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site.
2.5
1621
648.7
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
1.8
8570
4761.3
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
Ground Floor
1.8
11982
6656.9
Supplying all materials, labour, T&P and providing and fixing Vitrified tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size Kajaria/Somany/Johnson tile 30cmx30cm special printed series to be pre-approved by the Engineer-in-charge )
Kajaria/Somany/Johnson tile 30cmx30cm
13.42
11530
859.2
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
Ground Floor
75
12472
166.3
Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size Kajaria/Somany/Johnson tile 45cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge )
Kajaria/Somany/Johnson tile 45cmx30cm
65.76
54738
832.4
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 80 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 80 liter's along with 2 noa of faucets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge
Aqua guard pure Chill 80 PSS UV
1
112242
112242
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge
100mm dia P.V.C. pipe
25
29505
1180.2
150mm dia P.V.C. pipe
20
38756
1937.8
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge
Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
4
38062
9515.7
Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge
4
6272
1568.2
Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover )
2
37008
18504.3
Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
1
22117
22117.1
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements