Works Department Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
Refer DocumentsDocument Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_EICCL_80806_1Bid Award Id
ViewTender No
12 of 2022-23Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Brick Work in F&P in cement mortar 1:6 (1 cement :6 coarse sand) using flyash bricks of approved quality including watering, curing cost of all materials, labour, T & P taxes etc.Complete.
92.68
-
-
... More
Providing and laying reinforced cement concrete grade M-20 in various locations (Raft,Column footing, plinth band, chajja,drop and lintel,slab) laid, consolidated and cured excluding reinforcement but including centring and shuttering shuttering at all levels.
-
-
-
... More
Column Footing
151.71
-
-
... More
Column
45.84
-
-
... More
Chajja
9.29
-
-
... More
Window sill
1.18
-
-
... More
Lintel
4.08
-
-
... More
Plinth Beam
36.2
-
-
... More
Roof Beam
32.32
-
-
... More
Roof Slab
76.05
-
-
... More
Stair case
35.24
-
-
... More
High yield strength deformed bar reinforcement of approved quality(SAIL,TATA,JINDAL) in all reinforced concrete work including cutting bending, laying in position to the shape and profile required at all levels, binding with 18 gauge steel wire and cost of binding wire etc complete.
500.78
-
-
... More
Brick Work in superstructure in cement mortar 1:6 (1 cement :6 coarse sand) using flyash bricks of approved quality including watering, curing cost of all materials, labour, T & P taxes etc.Complete.
158.43
-
-
... More
Brick Work in superstructure in cement mortar 1:4 (1 cement :4 coarse sand) using flyash bricks of approved quality including watering, curing cost of all materials, labour, T & P taxes etc.Complete.
7.25
-
-
... More
Providing 16mm thick cement plaster (1:6) over brick masonry including racking out joints finishing smooth with proper planes and line curing for 7 days with cost conveyance royalty taxes of all materials labour T and P required.
1330.15
-
-
... More
Providing 12mm thick cement plaster (1:6) over brick masonry including racking out joints finishing smooth with proper planes and line curing for 7 days with cost conveyance royalty taxes of all materials labour T and P required.
459.7
-
-
... More
Providing 6mm thick cement plaster (1:4) over RCC works including deep chiping the surface & finishing smooth with proper planes and line curing for 7 days with cost conveyance royalty taxes of all materials labour T and P required.
454.56
-
-
... More
Providing and laying Vitrified tiles(of approved quality) in floor of size 600x600 mm of minimum thickness 10mm of 1st quality of approved make Laid over 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigments etc.with cost conveyance royalty taxes of all materials labour T and P required.
440.18
-
-
... More
Providing and laying Vitrified tiles(of approved quality) in dado of minimum thickness 10mm of 1st quality of approved make Laid over 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing the joints with white cement and matching pigments etc.with cost conveyance royalty taxes of all materials labour T and P required.
31.19
-
-
... More
Supplying ,fitting,& fixing industrial vitrified tiles including cost of all materials in floors & labour etc complete.
231.07
-
-
... More
Supplying,fabricating,assembling,fitting&fixing openable type Al.door with OEL anodised Al door section of 9202 as vertical member ,9201 as top member & 9200 as bottom & middle member including aluminium sections & fixtures complete .
59.53
-
-
... More
Supllying,fitting,fixing 6 mm thick black glass panes in al frame Doors including cost of material,labour etc complete.
4.74
-
-
... More
Dressed seasoned sal wood work framed and fixed (wrought and put up) in trusses, purlines frames of doors, windows, ventilators and beams.
0.37
-
-
... More
Providing and fixing 32mm thick piasal door,shutter of approved quality including fixed in position with Hardware Fittings etc.Complete.
15.72
-
-
... More
Providing and fixing of MS grills in windows with Square bars including cost conveyances royality taxes etc. labour and T & P required complete.
1359.5
-
-
... More
Supplying ,fitting,fixing collapsible gate with cost , conveyance , taxws etc complete.
238
-
-
... More
Providing & fixing alluminium Openable type window frame made out of approved sections, gaskets etc complete with cost conveyances royality taxes etc. labour and T & P required complete.
298.45
-
-
... More
Supllying,fitting,fixing 5 mm thick plain glass panes in al frame windows including cost of material,labour etc complete.
63.15
-
-
... More
Providing & fixing 20 mm thick granite stone(above 0.4 sqm) in steps, landing, dadoes over 25 mm thick cement mortar (1:4) including rounding edges with cost conveyance royalty taxes of all materials labour T & P required.
91.19
-
-
... More
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved designwith cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.
398.16
-
-
... More
Providing and finishing two coats of Synthetic ENAMEL PAINT of approved manufacture and shade to wood and steel faces applied evenly to given and uniform finish as APPROVED. Allow for preparation of surface and a coat of appropriate PRIMER. including cost of paint, primer, conveyance, royality, taxes labour and T & P required complete
79.49
-
-
... More
Wall painting two coats with 100% Acrylic emulsion paint (1st quality) exterior grade of approved make & shade manufactured by reputed manufacturer like NEROLAC / ASIAN / BERGER / DULOX or equivalent to make an even finished surface over a coat of primer including finishing the surface smooth with cement putty in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete.
493.39
-
-
... More
Providing inside walls, ceiling etc. with plastic emulsion paint over a coat of primer,including finishing the surface smooth with cement putty including cost of paint, primer, Putty conveyance, royality, taxes labour etc
14227.47
-
-
... More
Providing and fixing 1st quality glazed tiles (20cm x 30cm) in walls of minimum thickness 6mm of approved make in all colours, shade except bergundy, bottle green, black of any size as approved by engineer-in-charge In skirting, risers of steps and dados over 12 mm thick cement mortar (1:3) including pointing the joints with white cement and matching pigments etc.with cost conveyance royalty taxes of all materials labour T and P required.
98.54
-
-
... More
Backfilling Foundation & plinth with excavated earth including cost of all labour ,T&p etc complete.
280.32
-
-
... More
1st Floor Providing and laying reinforced cement concrete grade M-20 in various locations (Raft,Column footing, plinth band, chajja,drop and lintel,slab) laid, consolidated and cured excluding reinforcement but including centring and shuttering at all levels.
-
-
-
... More
Column
31.37
-
-
... More
Roof Beam
32.32
-
-
... More
Lintel
5.46
-
-
... More
Chajja
11.61
-
-
... More
Window sill
2.14
-
-
... More
Roof Slab
73.31
-
-
... More
Stair case
35.24
-
-
... More
High yield strength deformed bar reinforcement of approved quality(SAIL,TATA,JINDAL) in all reinforced concrete work including cutting bending, laying in position to the shape and profile required at all levels, binding with 18 gauge steel wire and cost of binding wire etc complete.
219.51
-
-
... More
Brick Work in superstructure in cement mortar 1:6 (1 cement :6 coarse sand) using Fly ash bricks of approved quality including watering, curing cost of all materials, labour, T & P taxes etc.Complete.
161.73
-
-
... More
Brick Work in superstructure in cement mortar 1:4 (1 cement :4 coarse sand) using Fly ash bricks of approved quality including watering, curing cost of all materials, labour, T & P taxes etc.Complete.
5.77
-
-
... More
Providing 16mm thick cement plaster (1:6) over brick masonry including racking out joints finishing smooth with proper planes and line curing for 7 days with cost conveyance royalty taxes of all materials labour T and P required.
1639.55
-
-
... More
Providing 12mm thick cement plaster (1:6) over brick masonry including racking out joints finishing smooth with proper planes and line curing for 7 days with cost conveyance royalty taxes of all materials labour T and P required.
398.01
-
-
... More
Providing 6mm thick cement plaster (1:4) over RCC works including deep chiping the surface & finishing smooth with proper planes and line curing for 7 days with cost conveyance royalty taxes of all materials labour T and P required.
604.09
-
-
... More
Providing and laying Vitrified tiles(of approved quality) in floor of size 600x600 mm of minimum thickness 10mm of 1st quality of approved make Laid over 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigments etc.with cost conveyance royalty taxes of all materials labour T and P required.
410.3
-
-
... More
Providing and laying Vitrified tiles(of approved quality) in dado of minimum thickness 10mm of 1st quality of approved make Laid over 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing the joints with white cement and matching pigments etc.with cost conveyance royalty taxes of all materials labour T and P required.
32.56
-
-
... More
Supplying ,fitting,& fixing industrial vitrified tiles including cost of all materials in floors & labour etc complete.
116.8
-
-
... More
Providing and fixing 1st quality glazed tiles(20cm x30cm) in walls of minimum thickness 6mm of approved make in all colours, shade except bergundy, bottle green, black of any size as approved by engineer-in-charge In skirting, risers of steps and dados over 12 mm thick cement mortar (1:3) including pointing the joints with white cement and matching pigments etc.with cost conveyance royalty taxes of all materials labour T and P required. (Size (20 M x30 M)
228.98
-
-
... More
Providing and fixing of MS grills with equire bar in windows with Square bars including cost conveyances royality taxes etc. labour and T & P required complete.
1568
-
-
... More
Dressed seasoned sal wood work framed and fixed (wrought and put up) in trusses, purlines frames of doors, windows, ventilators and beams.
0.43
-
-
... More
Providing and fixing 32mm thick piasal door,shutter of approved quality including fixed in position with Hardware Fittings etc.Complete.
18.36
-
-
... More
Providing & fixing alluminium Openable type window frame made out of approved sections, gaskets etc complete with cost conveyances royality taxes etc. labour and T & P required complete.
344.19
-
-
... More
Supllying,fitting,fixing 5 mm thick black glass panes in al frame Doors including cost of material,labour etc complete.
72.83
-
-
... More
Providing & fixing 20 mm thick granite stone(above 0.4 sqm) in steps, landing, dadoes over 25 mm thick cement mortar (1:4) including rounding edges with cost conveyance royalty taxes of all materials labour T & P required.
94.76
-
-
... More
Providing and finishing two coats of Synthetic ENAMEL PAINT of approved manufacture and shade to wood and steel faces applied evenly to given and uniform finish as APPROVED. Allow for preparation of surface and a coat of appropriate PRIMER. including cost of paint, primer, conveyance, royality, taxes labour and T & P required complete
83.24
-
-
... More
Wall painting two coats with 100% Acrylic emulsion paint (1st quality) exterior grade of approved make & shade manufactured by reputed manufacturer like NEROLAC / ASIAN / BERGER / DULOX or equivalent to make an even finished surface over a coat of primer with water bond cement primer & putty in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete.
409.62
-
-
... More
Providing inside walls, ceiling etc. with plastic emulsion paint over a coat of primer,including finishing the surface smooth with cement putty including cost of paint, primer, Putty conveyance, royality, taxes labour and T & P required complete.
1918.99
-
-
... More
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.
188.6
-
-
... More
Providing and fixing of Fixed Glazing with part Top hung of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS-513 of 0.6 mm thick “D” quality, galvanized as per IS-277 with zinc of 120Gm/Sq.mtr) with paint specification being with primer of 5-7 microns and finished paint with polyster paint (Black /Pearl white/ Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46x70 mm and fixed beadings are of 18x25 mm. Top hung shutter should be of 46 x 46 mm. Accessories / gaskets are to be used as per the manufacturer’s supply and specification like handle being made of high grade aluminium powder coated and with nylon receiver and gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating.The mullion caps and louvered-clips should be of glass filled nylon. The sections are to be cut to length ,mitre joined with corner bracket and frames are fixed to the concrete/masonry walls by means of self
19.69
-
-
... More
Second Floor Providing and laying reinforced cement concrete grade M-20 in various locations (Raft,Column footing, plinth band, chajja,drop and lintel,slab) laid, consolidated and cured excluding reinforcement but including centring and shuttering at all levels.
-
-
-
... More
Column
29.74
-
-
... More
Roof Beam
32.47
-
-
... More
Lintel
5.37
-
-
... More
Chajja
11.61
-
-
... More
Window sill
2.14
-
-
... More
Roof Slab
73.31
-
-
... More
Stair case
35.24
-
-
... More
High yield strength deformed bar reinforcement of approved quality(SAIL,TATA,JINDAL) in concrete work including cutting bending, laying in position to the shape and profile required at all levels, binding with 18 gauge steel wire and cost of binding wire etc complete.
217.18
-
-
... More
Brick Work in superstructure in cement mortar 1:6 (1 cement :6 coarse sand) using Fly ash bricks of approved quality including watering, curing cost of all materials, labour, T & P taxes etc.Complete.
183.36
-
-
... More
Brick Work in superstructure in cement mortar 1:4 (1 cement :4 coarse sand) using Fly ash bricks of approved quality including watering, curing cost of all materials, labour, T & P taxes etc.Complete.
5.77
-
-
... More
Providing 16mm thick cement plaster (1:6) over brick masonry including racking out joints finishing smooth with proper planes and line curing for 7 days with cost conveyance royalty taxes of all materials labour T and P required.
1583.72
-
-
... More
Providing 12mm thick cement plaster (1:6) over brick masonry including racking out joints finishing smooth with proper planes and line curing for 7 days with cost conveyance royalty taxes of all materials labour T and P required.
399.68
-
-
... More
Providing 6mm thick cement plaster (1:4) over RCC works including deep chiping the surface & finishing smooth with proper planes and line curing for 7 days with cost conveyance royalty taxes of all materials labour T and P required.
608.16
-
-
... More
Providing and laying Vitrified tiles(of approved quality) in floor of size 600x600 mm of minimum thickness 10mm of 1st quality of approved make Laid over 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigments etc.with cost conveyance royalty taxes of all materials labour T and P required.
428.06
-
-
... More
Providing and laying Vitrified tiles(of approved quality) in dado of minimum thickness 10mm of 1st quality of approved make Laid over 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing the joints with white cement and matching pigments etc.with cost conveyance royalty taxes of all materials labour T and P required.
44.13
-
-
... More
Supplying ,fitting,& fixing industrial vitrified tiles including cost of all materials in floors & labour etc complete.
116.8
-
-
... More
Providing and fixing 1st quality glazed tiles (20cm x 30cm)in walls of minimum thickness 6mm of approved make in all colours, shade except bergundy, bottle green, black of any size as approved by engineer-in-charge In skirting, risers of steps and dados over 12 mm thick cement mortar (1:3) including pointing the joints with white cement and matching pigments etc.with cost conveyance royalty taxes of all materials labour T and P required.
229.21
-
-
... More
Providing and fixing of MS grills in windows with Square bars including cost conveyances royality taxes etc. labour and T & P required complete.
1460
-
-
... More
Dressed seasoned sal wood work framed and fixed (wrought and put up) in trusses, purlines frames of doors, windows, ventilators and beams.
0.48
-
-
... More
Providing and fixing 32mm thick piasal door,shutter of approved quality including fixed in position with Hardware Fittings etc.Complete.
20.05
-
-
... More
Providing & fixing alluminium Openable type window frame made out of approved sections, gaskets etc complete with cost conveyances royality taxes etc. labour and T & P required complete.
344.19
-
-
... More
Supllying,fitting,fixing 5 mm thick black glass panes in al frame Doors including cost of material,labour etc complete.
72.83
-
-
... More
Providing & fixing 20 mm thick granite stone(above 0.4 sqm) in steps, landing, dadoes over 25 mm thick cement mortar (1:4) including rounding edges with cost conveyance royalty taxes of all materials labour T & P required.
94.76
-
-
... More
Providing and finishing two coats of Synthetic ENAMEL PAINT of approved manufacture and shade to wood and steel faces applied evenly to given and uniform finish as APPROVED. Allow for preparation of surface and a coat of appropriate PRIMER. including cost of paint, primer, conveyance, royality, taxes labour and T & P required complete
87.63
-
-
... More
Wall painting two coats with 100% Acrylic emulsion paint (1st quality) exterior grade of approved make & shade manufactured by reputed manufacturer like NEROLAC / ASIAN / BERGER / DULOX or equivalent to make an even finished surface over a coat of primer with water bond cement primer & putty in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete.
411.29
-
-
... More
Providing inside walls, ceiling etc. with plastic emulsion paint over a coat of primer,including finishing the surface smooth with cement putty including cost of paint, primer, Putty conveyance, royality, taxes labour and T & P required complete.
1878.65
-
-
... More
Providing,fitting & fixing of false ceiling with Arm Strong silhouette main runner,cross tee,wall angle with classic lite RH-95 (ML) board on 4 walls to be fixed by means of steel screw, PVC plug & the Arm strong grid 2'-0"x2'-0" suspended from ceiling etc complete.
103.39
-
-
... More
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.
188.6
-
-
... More
Providing and fixing of Fixed Glazing with part Top hung of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS-513 of 0.6 mm thick “D” quality, galvanized as per IS-277 with zinc of 120Gm/Sq.mtr) with paint specification being with primer of 5-7 microns and finished paint with polyster paint (Black /Pearl white/ Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46x70 mm and fixed beadings are of 18x25 mm. Top hung shutter should be of 46 x 46 mm. Accessories / gaskets are to be used as per the manufacturer’s supply and specification like handle being made of high grade aluminium powder coated and with nylon receiver and gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating.The mullion caps and louvered-clips should be of glass filled nylon. The sections are to be cut to length ,mitre joined with corner bracket and frames are fixed to the concrete/masonry walls by means of self
19.69
-
-
... More
Third floor Providing and laying reinforced cement concrete grade M-20 in various locations (Raft,Column footing, plinth band, chajja,drop and lintel,slab) laid, consolidated and cured excluding reinforcement but including centring and shuttering at all levels.
-
-
-
... More
Column
33.72
-
-
... More
Chajja
11.75
-
-
... More
Roof Beam
38
-
-
... More
Window sill
2.16
-
-
... More
Lintel
4.42
-
-
... More
Roof Slab
84.59
-
-
... More
Stair Case
35.24
-
-
... More
High yield strength deformed bar reinforcement of approved quality(SAIL,TATA,JINDAL) in concrete work including cutting bending, laying in position to the shape and profile required at all levels, binding with 18 gauge steel wire and cost of binding wire etc complete.
241.61
-
-
... More
Brick Work in superstructure in cement mortar 1:6 (1 cement :6 coarse sand) using flyash bricks of approved quality including watering, curing cost of all materials, labour, T & P taxes etc.Complete.
235.31
-
-
... More
Brick Work in superstructure in cement mortar 1:4 (1 cement :4 coarse sand) using Fly ash bricks of approved quality including watering, curing cost of all materials, labour, T & P taxes etc.Complete.
3.07
-
-
... More
Providing 16mm thick cement plaster (1:6) over brick masonry including racking out joints finishing smooth with proper planes and line curing for 7 days with cost conveyance royalty taxes of all materials labour T and P required.
2264.3
-
-
... More
Providing 12mm thick cement plaster (1:6) over brick masonry including racking out joints finishing smooth with proper planes and line curing for 7 days with cost conveyance royalty taxes of all materials labour T and P required.
608.73
-
-
... More
Providing 6mm thick cement plaster (1:4) over RCC works including deep chiping the surface & finishing smooth with proper planes and line curing for 7 days with cost conveyance royalty taxes of all materials labour T and P required.
688.64
-
-
... More
Providing and laying Vitrified tiles(of approved quality) in floor of size 600x600 mm of minimum thickness 10mm of 1st quality of approved make Laid over 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigments etc.with cost conveyance royalty taxes of all materials labour T and P required.
471.34
-
-
... More
Providing and laying Vitrified tiles(of approved quality) in dado of minimum thickness 10mm of 1st quality of approved make Laid over 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing the joints with white cement and matching pigments etc.with cost conveyance royalty taxes of all materials labour T and P required.
50.82
-
-
... More
Supplying ,fitting,& fixing industrial vitrified tiles including cost of all materials in floors & labour etc complete.
116.8
-
-
... More
Providing and fixing 1st quality glazed tiles (20cm x 30cm)in walls of minimum thickness 6mm of approved make in all colours, shade except bergundy, bottle green, black of any size as approved by engineer-in-charge In skirting, risers of steps and dados over 12 mm thick cement mortar (1:3) including pointing the joints with white cement and matching pigments etc.with cost conveyance royalty taxes of all materials labour T and P required.
245.63
-
-
... More
Providing and fixing of MS grills in windows with Square bars including cost conveyances royality taxes etc. labour and T & P required complete.
1475
-
-
... More
Dressed seasoned sal wood work framed and fixed (wrought and put up) in trusses, purlines frames of doors, windows, ventilators and beams.
0.43
-
-
... More
Providing and fixing 32mm thick piasal door,shutter of approved quality including fixed in position with Hardware Fittings etc.Complete.
18.68
-
-
... More
Providing & fixing alluminium Openable type window frame made out of approved sections, gaskets etc complete with cost conveyances royality taxes etc. labour and T & P required complete.
323.78
-
-
... More
Supllying,fitting,fixing 5 mm thick black glass panes in al frame Doors including cost of material,labour etc complete.
68.51
-
-
... More
Providing & fixing 20 mm thick granite stone(above 0.4 sqm) in steps, landing, dadoes over 25 mm thick cement mortar (1:4) including rounding edges with cost conveyance royalty taxes of all materials labour T & P required.
95.01
-
-
... More
Providing and finishing two coats of Synthetic ENAMEL PAINT of approved manufacture and shade to wood and steel faces applied evenly to given and uniform finish as APPROVED. Allow for preparation of surface and a coat of appropriate PRIMER. including cost of paint, primer, conveyance, royality, taxes labour and T & P required complete
81.81
-
-
... More
Wall painting two coats with 100% Acrylic emulsion paint (1st quality) exterior grade of approved make & shade manufactured by reputed manufacturer like NEROLAC / ASIAN / BERGER / DULOX or equivalent to make an even finished surface over a coat of primer with water bond cement primer & putty in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete.
620.48
-
-
... More
Providing inside walls, ceiling etc. with plastic emulsion paint over a coat of primer,including finishing the surface smooth with cement putty including cost of paint, primer, Putty conveyance, royality, taxes labour and T & P required complete.
352.19
-
-
... More
Providing,fitting & fixing of false ceiling with Arm Strong silhouette main runner,cross tee,wall angle with classic lite RH-95 (ML) board on 4 walls to be fixed by means of steel screw, PVC plug & the Arm strong grid 2'-0"x2'-0" suspended from ceiling etc complete
66.33
-
-
... More
Providing and fixing of Fixed Glazing with part Top hung of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS-513 of 0.6 mm thick “D” quality, galvanized as per IS-277 with zinc of 120Gm/Sq.mtr) with paint specification being with primer of 5-7 microns and finished paint with polyster paint (Black /Pearl white/ Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46x70 mm and fixed beadings are of 18x25 mm. Top hung shutter should be of 46 x 46 mm. Accessories / gaskets are to be used as per the manufacturer’s supply and specification like handle being made of high grade aluminium powder coated and with nylon receiver and gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating.The mullion caps and louvered-clips should be of glass filled nylon. The sections are to be cut to length ,mitre joined with corner bracket and frames are fixed to the concrete/masonry walls by means of self
19.69
-
-
... More
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.
188.6
-
-
... More
25 mm thick C.C(1:2:2) as grading concrete for roof and open terrace including cost of all labour, binding & laying etc complete.
739.21
-
-
... More
Supplying, fitting & fixing 100mm dia P.V.C. rain water down pipe (medium) with necessary bends, shoes, heads etc. including cost of P.V.C. pipe, clamps, nails etc. complete.
117.07
-
-
... More
ROAD Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lifts with sundries & T&P required for the work complete as directed by the Engineer in charge.
443.25
-
-
... More
Supplying and filling in foundation treanches and plinth,ditches with sand well watered and rammed in layrs not exceeding 23cm in depth with all lead and lift including cost, conveyance loading,unloading royalties and taxes of all materials, cost of all labour,sundris,T&P required for the work etc. complete.
147.75
-
-
... More
Cement Concrete (1:3:6) using 40mm size hard granite C.B. metal approved quality from approved quarry including hoisting laying using concrete mixture and vibrators including cost, carriage, royalty, cost of all labour T.&P. etc complete and as directed
98.5
-
-
... More
PCC/R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, T&P centering shuttering etc complete but excluding cost of reinforcement complete.
197
-
-
... More
DRAIN Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lifts with sundries & T&P required for the work complete as directed by the Engineer in charge.
129.66
-
-
... More
Supplying and filling in foundation treanches and plinth,ditches with sand well watered and rammed in layrs not exceeding 23cm in depth with all lead and lift including cost, conveyance loading,unloading royalties and taxes of all materials, cost of all labour,sundris,T&P required for the work etc. complete.
17.76
-
-
... More
Cement Concrete (1:3:6) using 40mm size hard granite C.B. metal approved quality from approved quarry including hoisting laying using concrete mixture and vibrators including cost, carriage, royalty, cost of all labour T.&P. etc complete and as directed
17.76
-
-
... More
PCC/R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, T&P centering shuttering etc complete but excluding cost of reinforcement complete.
-
-
-
... More
Weep Hole
39.88
-
-
... More
Cover Slab
11.84
-
-
... More
Providing HYSD reinforcement for RCC works including bending, binding & placing in position as per Drawing including cost, conveyance of all materials, all labour and T&P etc complete.
29.41
-
-
... More
Dismentalling Dismentalling GCI or AC sheet roffing after careful removal of nails and bolts including stacking the useful materials for reuse and removing the debries away from work site.
418
-
-
... More
Dismentalling RCC slab beams lintel stair case etc & stacking the same for reuse and removing the debries away from work site.
71
-
-
... More
Dismentalling brick or stone masonery in lime or cement mortar above 3m height including stacking the useful materials for reuse and removing the debries away from work site.
418.58
-
-
... More
EI Works FIRE FIGHTING:Providing laying cutting welding jointing of ‘C' class MS pipe of 200 mm dia(TATA/JINDAL) as per IS1239 with welded / flanged / screwed joints and with heavy clamps, hangers, brackets or pipe supports as required including MS pipe of shorter lengths, tapering connecting pieces, short or long bends etc. Complete to make the system operative as required . The pipes will have to be laid and fixed on walls, ceilings, into brick walls or RCC with lead anchor fasteners. The work includes painting two coats of approved shade(Post office red)of enamel paint over a coat of approved primer for over ground / overheads pipes,excavation upto 1 mtr depth in ground, The piping installation has to be put to hydraulic test to1.5 times the working pressure (for minimum 2 hrs.) before applying paint or pipe coating and wrapping etc. Complete
12
-
-
... More
Providing laying cutting welding jointing of ‘C' class MS pipe of 150 mm dia(TATA/JINDAL) as per IS1239 with welded / flanged / screwed joints and with heavy clamps, hangers, brackets or pipe supports as required including MS pipe of shorter lengths, tapering connecting pieces, short or long bends etc. Complete to make the system operative as required . The pipes will have to be laid and fixed on walls, ceilings, into brick walls or RCC with lead anchor fasteners. The work includes painting two coats of approved shade(Post office red)of enamel paint over a coat of approved primer for over ground / overheads pipes,excavation upto 1 mtr depth in ground, The piping installation has to be put to hydraulic test to1.5 times the working pressure (for minimum 2 hrs.) before applying paint or pipe coating and wrapping etc. Complete
371
-
-
... More
Providing laying cutting welding jointing of ‘C' class MS pipe of 100 mm dia(TATA/JINDAL) as per IS1239 with welded / flanged / screwed joints and with heavy clamps, hangers, brackets or pipe supports as required including MS pipe of shorter lengths, tapering connecting pieces, short or long bends etc. Complete to make the system operative as required . The pipes will have to be laid and fixed on walls, ceilings, into brick walls or RCC with lead anchor fasteners. The work includes painting two coats of approved shade(Post office red)of enamel paint over a coat of approved primer for over ground / overheads pipes,excavation upto 1 mtr depth in ground, The piping installation has to be put to hydraulic test to1.5 times the working pressure (for minimum 2 hrs.) before applying paint or pipe coating and wrapping etc. Complete
280
-
-
... More
Providing laying cutting welding jointing of ‘C' class MS pipe of 80 mm dia(TATA/JINDAL) as per IS1239 with welded / flanged / screwed joints and with heavy clamps, hangers, brackets or pipe supports as required including tapering connecting pieces, short or long bends etc. Complete to make the system operative as required . The pipes will have to be laid and fixed on walls, ceilings, into brick walls or RCC with lead anchor fasteners. The work includes painting two coats of approved shade(Post office red)of enamel paint over a coat of approved primer for over ground / overheads pipes,excavation upto 1 mtr depth in ground, The piping installation has to be put to hydraulic test to1.5 times the working pressure (for minimum 2 hrs.) before applying paint or pipe coating and wrapping etc. Complete
54
-
-
... More
Providing laying cutting welding jointing of ‘C' class MS pipe of 65 mm dia(TATA/JINDAL) as per IS1239 with welded / flanged / screwed joints and with heavy clamps, hangers, brackets or pipe supports as required including MS pipe of shorter lengths, tapering connecting pieces, short or long bends etc. Complete to make the system operative as required . The pipes will have to be laid and fixed on walls, ceilings, into brick walls or RCC with lead anchor fasteners. The work includes painting two coats of approved shade(Post office red)of enamel paint over a coat of approved primer for over ground / overheads pipes,excavation upto 1 mtr depth in ground, The piping installation has to be put to hydraulic test to1.5 times the working pressure (for minimum 2 hrs.) before applying paint or pipe coating and wrapping etc. Complete
42
-
-
... More
Providing laying cutting welding jointing of ‘C' class MS pipe of 40 mm dia(TATA/JINDAL) as per IS1239 with welded / flanged / screwed joints and with heavy clamps, hangers, brackets or pipe supports as required including MS pipe of shorter lengths, tapering connecting pieces, short or long bends etc. Complete to make the system operative as required . The pipes will have to be laid and fixed on walls, ceilings, into brick walls or RCC with lead anchor fasteners. The work includes painting two coats of approved shade(Post office red)of enamel paint over a coat of approved primer for over ground / overheads pipes,excavation upto 1 mtr depth in ground, The piping installation has to be put to hydraulic test to1.5 times the working pressure (for minimum 2 hrs.) before applying paint or pipe coating and wrapping etc. Complete
130
-
-
... More
Providing laying cutting welding jointing of ‘C' class MS pipe of 25 mm dia(TATA/JINDAL) as per IS1239 with welded / flanged / screwed joints and with heavy clamps, hangers, brackets or pipe supports as required including MS pipe of shorter lengths, tapering connecting pieces, short or long bends etc. Complete to make the system operative as required . The pipes will have to be laid and fixed on walls, ceilings, into brick walls or RCC with lead anchor fasteners. The work includes painting two coats of approved shade(Post office red)of enamel paint over a coat of approved primer for over ground / overheads pipes,excavation upto 1 mtr depth in ground, The piping installation has to be put to hydraulic test to1.5 times the working pressure (for minimum 2 hrs.) before applying paint or pipe coating and wrapping etc. Complete
560
-
-
... More
Supplying and fixing Single headed Stainless steel internal /external hydrant valve with instantaneous Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Stainless Steel cap and chain as required
12
-
-
... More
Supplying, fixing, testing and commissioning of butterfly valve of 150 mm dia PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095.
11
-
-
... More
Supplying, fixing, testing and commissioning of butterfly valve of 100 mm dia PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095.
4
-
-
... More
Supplying, fixing, testing and commissioning of butterfly valve of 50 mm dia PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095.
5
-
-
... More
Supply and installation, testing and commissioning of Isolation Sluice valves tested to ISI marked ,PN 1.6 with CI body, bonnet & brass trim parts, & having necessary companion flanges, bolts, nuts, gasket packing and any other spares, including indicator for open and shut position to be installed underground in valve chamber as per fire practice etc complete
Size : 200 mm (GEAR OPERATED)
1
-
-
... More
Supplying, fixing, testing & commissioning of double flanged sluice valve of 150 mm dia PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780.
4
-
-
... More
Supplying, fixing, testing & commissioning of double flanged sluice valve of 80 mm dia PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780.
2
-
-
... More
Supplying, fixing, testing & commissioning of double flanged sluice valve of 65 mm dia PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780.
3
-
-
... More
Providing, installation, testing and commissioning of non-return valve of 150 mm dia confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required
5
-
-
... More
Providing, installation, testing and commissioning of non-return valve of 80 mm dia confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required
1
-
-
... More
Providing, installation, testing and commissioning of stainless steel 200 mm dia Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange
1
-
-
... More
Supplying and fixing Stainless Steel (Grade 304) 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A)
24
-
-
... More
Supplying and fixing 30 m first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket
8
-
-
... More
Supplying & fixing Stainless Steel (Grade 304) 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling asrequired
12
-
-
... More
Providing and fixing fire hose cabinet to house fire hydrant & hose, including all other related accerrories fabricated from FRP. sheet (16 Gauge) of having front door with locking arrangement, partially glazed with 4 mm thick glass. Cabinet shall be powder coated & painted with post office red colour . The hose box size is 750 mm x 600 mm x 250 mm MAKE:KARTAR/EVERSAFE/GILPRO/SAFEX
12
-
-
... More
Supplying and fixing 4 way fire Brigade service inlate of size 150mm dia. With 4 No. 63mm (2.1/2") size stainless steel made outlets (Stainless steel male coupling) including metallic cover of mild steel and glass front, indicator plates,150mm BFV,150mm NRV etc. complete. 4 way Fire Brigade service inlet
as required :
MAKE:MINIMAX/SAFEGUARD/GETECH/RONAK/KARTAR/EVERSAFE
3
-
-
... More
Supplying and fixing air vessel made of 200 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve(make:SANT/SAFE GUARD/IVC on top and flanged connection to discharge head / riser, drain arrangement with 25 mm dia gun metal wheel valve (make:Zoloto/Leader) with required accessories, pressure gauge(Make:FIEBIG/H.GURU) and painting (Make:ASIAN )with synthetic enamel paint of approved shade as required.
1
-
-
... More
Supply installation testing & commissioning of pendent/upright type standar sprinkler with QB of 68/79 deg.c temperature rating and 1/2 end connection confirming to IS:15105. Make:GRINNELL/STAR/TYKO/VIKING
225
-
-
... More
Supply installation testing &commissioning of stainless steel corrugated flexible pipe (hose) for dropping sprinklers below false ceiling, pipe shall be 16 bar pressure rating and 1500 mm long 25mm dia with union/reducer collar,clamps etc.as required Make:easyflex/superflex/flexhead
225
-
-
... More
Supply, installation, testing & commissioning of rosette plate Make:GRINNELL/STAR/TYKO/VIKING
225
-
-
... More
Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of 150mm dia , flanges, orifice plate, gasket etc of 150mm sizes as required :
MAKE: HD/GEETEK/MATHER+PLAT
1
-
-
... More
Supply,installation,testing and commissioning of Gun metal/Brass forged chrome finished ball valves with fitting of screwed end type of 25mm dia for hose reel,
12
-
-
... More
Providing, fitting & fixing of 50 mm NB size bronze flanged type globe valve with hand wheel confirming to IS-13114:1991 with IS mark of pressure rating PN-1.60 including fixing the same with supply of required jointing materials like flanges,rubber insertion,MS nut& bolt,paint etc and testing the joints with required water pressure for all floors
5
-
-
... More
Supply,installation,testing & commissioning of pressure gauge of 0-16 Kgf/sq.cm range with cut off bronze ball valves of 15mm size with all accessories as per direction of eneginer in charge.
4
-
-
... More
Providing & fixing flow switch in 150 mm dia M.S. pipe including connection etc as required
3
-
-
... More
Supply,installation,testing & commissioning of pressure switch of with cut off bronze ball valves of 15mm size with integral stariners & falre nut Imixed ends ) with accessories as per direction of eneginer in charge.
7
-
-
... More
Supply Installation testing and commissioning of C.I Slight Glass with 25NB gun metal globe valve with CI hand wheel ISI marks for all floors etc. all complete as per approved specification and direction of EIC.
4
-
-
... More
Supply & installation of approved make flow switch on sprinkler header on each floor, operating at 24-V with all accessories & hardwares as per NBC/LFA/direction of engineer-in-charge.
4
-
-
... More
Excavation of pipelines in trench and pit in open areas where disposal or surplus earth is done along the allignment, including trimming and dressing sides, levelling of beds of trenches to correct grades, cutting joint holes, refilling consolidation and dewatering of refilling in 15 cm layers & restoration & unmettalled or unpaved surface to it's original condition. The rate including the cost of necessary timbering dewatering of drain water, diversion of traffic, night signals, fixing caution boars, watching fencing etc. Upto 1.5m depth in all classes of soil
210
-
-
... More
Construction masonary chamber 60 x 100 x 100-150 cm. inside with 75class designation brick work of 250mm wall thickness in cement mortar 1:4 for sluice valve & top slab CC 1:1.5:3 mix necessary excavation foundation concrete 1:3:16 of 150mm thickness and inside plastering with cement mortar 1:3, 15mm thick finished with a floating coat of neat cement complete as per standard design. The scope shall also include CI surface box as per approved quality & CI heavy duty cover for the valve chamber. The scaope shall include all required civil work like excavation, dewatering, backfilling etc. Valve chamber : 60 x 100 x 100-150cm
2
-
-
... More
Supplying , installation , testing & commissioning of Rubber bellows on discharge side of pump confirming to EJMA with all hardwares , companions flanges & gaskets, et. Size : 150mm
2
-
-
... More
Size : 80mm
1
-
-
... More
ANALOGUE ADDRESSABLE FIRE DETECTION AND ALARM SYSTEM:Supply, Installation,Testing & Commisioning of Microprocessor based Analgue Addressable 2 loop Networkable Control Panel, compliant with EN54-2 and EN54-4.The Panel having 2 inbuilt programmable sounder circuits, each circuit rated at 1Amp, 16 zonal LED indicators, 5 programmable inputs, 3 programmable relays, 3A power supply, large graphic display, Real time clock. Each loop shall have a capacity of 127 analogue Addressable devices and 127 Base sounders/Base Sounder Beacons. The Panel have the capability to take Addressable Intelligent Wired and Wireless Devices on same loop. The Panel have up to 512 sub-addressable programmable Inputs/Outputs via optional RS485 COMMS serially connected expansion cards. powerful wide cause and effects, sensitivity adjustment and drift compensation, stores 500 last events in event log.. The panel shall have integral SMF lead acid batteries with sealed cells of 24 V capable of running for a minimum of 8 hours with integral battery charger complete as required and as per specification. The fire alarm panel shall be suitable for software integration with BMS & PA system.
1
-
-
... More
Supply, Installation,Testing & Commisioning of Addressable Smoke Sensor with Twin fire LED's allow 360 degree veiwing, User selectable sensitivity modes 1% to 4.5% obs/m, Approved by LPCB & VdS. Soft Addressing Facility Available complete with base as required.
120
-
-
... More
Supply Installation, Testing & Commissioning of wall mounting loop powered addressable type hooter with strobe with all accessories as per specification.
16
-
-
... More
Supply, Installation, testing and Commissioning of Addressable Manual Call Point with Integral Short Circuit Isolator with Bi-coloured status LED (red for alarm, amber for (short-circuit) MCP shall be recessed in wall .
16
-
-
... More
Supplying, installing, testing and commissioning of 2C X 1.5 sq. mm, PVC insulated copper wires with aluminium armour confirming to IS standards and specifications.
1800
-
-
... More
Const. of 100000 Ltr. Water sump:Earth work in excavation of foundation in hard soil within 50m lead and 1.5m lift including rough dressing and breaking clods to maximum 5cm. To 7cm. And laying in layers not exceeding 0.3m in depth and as per specification complete.
177.53
-
-
... More
Supplying filling foundataion & plinth with sand well watered & rammed with cost, conveyance, taxes royality etc. complete.
9.26
-
-
... More
Cement concrete (1:3:6) with 4cm size hard granite metal including cost, conveyance,royality,taxes,watering and curing etc. complete.
9.26
-
-
... More
Brick work with Fly Ash bricks having crusing strength not less than 75kg/cm^2 in cement motar (1:6) in F&P with cost,coveyance,royality watering&curing etc. complete.
29.33
-
-
... More
R.Cement concrete (M-20) with 20mm size hard granite chips including cost, conveyance,royality,taxes,watering and curing etc. complete.A) Raft
18.53
-
-
... More
B)Wall
18.02
-
-
... More
C) Slab
7.55
-
-
... More
Cutting,bending,binding M.S Rod for R.C.C work including placing in position and cost of M.S.Rod & binding wire etc. cpomplete.
35.6
-
-
... More
Cement concrete (M-25) with 12mm size hard granite chips including cost, conveyance,royality,taxes,watering and curing etc. complete.
3
-
-
... More
2.5 cm thick grading concrete (1:2:2) with 6 mmsize hard granite chips including cost,conveyance,royality, taxes,watering& curing etc. complete.
50.31
-
-
... More
6mm thick cement plaster (1:4) over brick work with cst of all materials and all labour etc.
40
-
-
... More
12mm thick cement plaster (1:6) over brick work with cst of all materials and all labour etc.
78.05
-
-
... More
Cement Washing two coats over wall surface including cost of all materials and labour (T&P) etc. complete
78.05
-
-
... More
Finishing walls with water proofing enamel paint two coat including cost of cement with all labour T&P etc. complete.
78.05
-
-
... More
Storage Tank of 10000 Lts. (Above the top Roof slab) R.Cement concrete (M-20) with 12mm size hard granite chips including cost, conveyance,royality,taxes,watering and curing etc. complete.A) Column + B) Beam
2.45
-
-
... More
C) Bottom Slab
5.39
-
-
... More
D) Wall (0.25mt Thick)
2.77
-
-
... More
Cutting,bending,binding M.S Rod for R.C.C work including placing in position and cost of M.S.Rod & binding wire etc. complete.
12.02
-
-
... More
12mm thick cement plaster (1:6) over brick work with cst of all materials and all labour etc.
33.66
-
-
... More
Cement Washing two coats over wall surface including cost of all materials and labour (T&P) etc. complete
33.66
-
-
... More
Finishing walls with water proofing enamel paint two coat including cost of cement with all labour T&P etc. complete.
33.66
-
-
... More
construction of Pump House for fire Fighting system of MCH Building : Earth work in excavation of foundation in hard soil with in 50m lead and 1.5m lift including rough dressing and breaking clods to maximum 5cm. To 7cm laying in layers not exceeding 0.3m in depth and as per specification complete.
18.2
-
-
... More
Supplying filling foundation & Plinth with sand well watered & rammed with cost,conveyance,taxes royalty etc. Complete.
40.11
-
-
... More
Cement concrete(1:3:6) with 4 cm size hard granite metal including cost,conveyance,royalty,taxes,watering and curing etc. Complete.
7.53
-
-
... More
R.cement concrete(M-20) with 20 mm size hard granite chips including cost,conveyance,taxes,watering and curing etc. Complete.A) Column base
3.66
-
-
... More
B)Plinth Beam
1.84
-
-
... More
C)Column/Beam
0.62
-
-
... More
D)Lintel
0.18
-
-
... More
E)Chajja
2.23
-
-
... More
F)Roof Slab
4.54
-
-
... More
G)Window Sill
0.06
-
-
... More
Cutting,Bending,binding M.S rod for R.C.C work including placing in position and cost of M.S.Rod & binding wire etc. Complete.
9.15
-
-
... More
Brick work with Fly ash bricks having crusing strenth not less than 75 Kg/cm^2 in cement mortar(1:6) in F&P with cost,conveyance,royalty.watering & curing etc. Complete.
12.44
-
-
... More
Brick work with fly ash bricks having crusing strength not less than 75Kg/Cm^2 in cement mortar(1:6) in superstructure with cost,conveyance,royality,watering & curing etc.complete.
20.31
-
-
... More
2.5 cm thick grading concrete (1:2:2) with 6 mm size hard granite chips including cost,conveyance,royality,taxes,watering 7 curing etc.complete.
11.93
-
-
... More
16mm thick cement plaster(1:6) over brick work with cost of all materials and all labour etc.
77.34
-
-
... More
12mm thick cement plaster(1:6) over brick work with cost of all materials and all labour etc.
115.92
-
-
... More
6mm thick cement plaster(1:4)over brick work with cost of all materials and all labour etc.
46.83
-
-
... More
2.5 cm A.S.flooring with cement concrete(1:2:4) including punning usingg 12mm size c.b.granite chips with cost conveyance,royality,watering & curing etc.complete.
41.48
-
-
... More
12mm thick cement plaster(1:6) over brick work with cost of all materials and all labour etc.
4.58
-
-
... More
Providing of M.S.Door/Window/Grill gates made out of M.S Angle flat,sheet etc. Including cost,conveyance taxes etc.complete.
174.75
-
-
... More
Finishing walls with water proofing cement paint two coat including cost of cement paint & labour charges.
240.09
-
-
... More
painting two coats over coat of primer to steel surface including cost of paint and primer with cost,conveyance,taxes etc. Complete.
10.14
-
-
... More
Supplying & installing completely testing & commissioning of End Suction Back Pull Out pump set having pump speed of 2900 rpm, Pump Efficiency not less than 65%, with CI Casing, Bronze Impeller, SS 410 Shaft & Shaft Sleeve Connected through Flexible Coupling with a TEFC Sq. Cage Induction Motor mounted on a common base frame fabricated in MS Channel. Packing has to be of Mechanical seal. It has to be inclussive of all the pump accessories. The pump shall be capable of giving not less than 150% discharge at a head not less than 65% of the rated head. Motor to be of continuous rating Motor to be suitable for 415V, 50Hz, AC supply of 45 KW rating for the above pumps. Motor shall accept +/- 10% variation in voltage and +/- 3% variation in frequency. It has to be of IE2 efficiency class. etc. complete. Pump - Motor : Discharge : 1620 LPM, Head-70 mtr .
1
-
-
... More
Supplying, installing, testing and commissioning of End Suction Back Pull Out pump set having pump Pump - Motor: Discharge: 180 LPM, Head: 70 mtr. speed of 2900 rpm, Pump Efficiency not less than 25%, with CI Casing, Bronze Impeller, SS 410 Shaft & Shaft Sleeve Connected through Flexible Coupling with a TEFC Sq. Cage Induction Motor mounted on a common base frame fabricated in MS Channel.Motor to be suitable for 415V, 50Hz, AC supply of 11 KW rating for the above pumps. Motor shall accept +/- 10% variation in voltage and +/- 3% variation in frequency. It has to be of IE2 efficiency class. Packing has to be of Mechanical seal. It has tio be inclusive of all the pump accessories complete . The scope shall also include necessary coupling, coupling guard, base frame, foundation bolts, RCC foundation, etc. complete
1
-
-
... More
Supply, installation, testing & commissioning of diesel Engine driven common stand by pump,Pump - diesel engine: Discharge: 1620 LPM, Head: 70 mtr. horizontal centrifugal end suction type with gland packing and capable to deliver 1620 LPM , to ensure a minimum pressure of 3.5 Kg/Sqcm at the farthest or topmost hydrant / sprinkler. Fire pump shall have C.I. casing, CS diffusers, bronze impeller (hard finished and dynamically balanced) and S.S. (304) Shaft with mechanical seal. The installation shall be complete with necessary pressure gauge with gun metal shut off cock on suction & delivery side. The pump shall coupled to not less than 45 kw of Diesel engine radiator water cooled type with speed not more than 1800 RPM and complete set shall be mounted on common base frame. Batteries & battery leads with stand, Fuel tank ( for 6 Hrs. operation ) with stand & gauge glass, Fuel piping with valves. The quoted rate shall includes radiator water cooling piping(if required) coupling guard and other standard accessories,RCC foundation (as recommended by manufacturer) and foundation bolts, etc. complete. Pump shall be capable of furnishing Not less than 150% of rated capacity at a head of Not less than 65% of the rated head. The shut off head shall Not exceed 120% of rated head. flexible coupling, coupling guard,anti vibration pad & exhaust pipe connection complete as required.
1
-
-
... More
MCC for Fire Pumps : Design, manufacture, supply ,installation, testing and commissioning of following Automated Fire panel suitable for 415V, 3 phase, 4 wire, 50 hz power distribution system. The panel should be indoor, free standing, floor mounting, sheet metal clad, Cubicle, dead front, dust and vermin proof, compartmentalized design fabricated out of 2mm CRCA sheet complete with Cu busbars, a separate earth bus bar to be provided through out the length of the panel. The incoming and outgoing feeders shall be accommodated in a modular multitier arrangement, adequate size cable alley, painting, earthing numbering, damper plate etc. as required as per direction of engineer-in-charge and as per local Fire Authority requirement.The panel shall be fabricated by only CPRI approved manufacturer As per the details below INCOMING 1 Nos 200A FP MCCB (50 KA), 1 Set of 400 Amps. TPN Cu. Bus bars with color coded heat shrinkable PVC sleeves. Indicator R,Y,B,ON,OFF,TRIP. Ammeter LCD type display+3 CTs,Voltmeter LCD type display OUTGOING FEEDER FOR MAIN PUMPS - 01 No : 01 No 160 A TP MCCB, with star delta Starter contactor and OLR ratings as per type 2 co-ordination,with digital ammeter, voltmeter, ON,OFF push button, local remote switch,auto manual seclector switch etc. FEEDER FOR JOCKEY PUMP - 01 No: 01 No 32 A TP MCCB, with star delta Starter contactor and OLR ratings as per type 2 co-ordination, with Digital Ammeter,voltmeter, ON,OFF push button, local remote switch, auto manual selector switch etc. DIESEL ENGINE PUMP 01 No a) 25Amps DPMCB - 01 No( b) Battery charger with transformer with rectifier resistance DC ammeter, DC voltmeter, Trickle / booster / off selector switch - 1 No (c) 1 set of indicating lamps for the following : 1. Phase indication 2. Battery charger on 3.Over load relay 4. DC supply on 5.Control switch on 6. Engine fails to start 7. Pump on 8. Low oil pressure 9. High water temperature10. Auto manual selector switch (d) 1 sets of push button stations for the following : 1. Engine Start 2. Engine Stop 3. Engine - hooter ACK 4. Engine - fault reset (e) Selector switches (Engine control, mode selector)-1 No ( f) Auxiliary relays / contactors / timer for sequence operating for starting and stopping of the engine - 1 set (g) Hooter for audio alarm (Industrial type) - 1 No. (h)Automatic source transfer Relay with 3 attempt starting,High Low Lube pressure, timers and relays as required and suitable contactor.Programmable Logic Controller for automatic operation All the components shall be housed in a common cubical made of 2mm CRCA sheet with required stiffeners ( if required). The panel shall be powder coated of approved color both inside & out side. The panel shall have both bottom & top cable entry provisions and panel shall be mounted on Pedestal of 300 mm height. Also panel shall have sufficient (min. 10 Nos) NO/NC contacts for extending the status( annunciation) of fire pumps to the Fire alarm panel.
1
-
-
... More
Supplying and laying 25 mm X 5 mm G.l strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.l. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.l. nut bolt & spring washer spaced at 50mm).
60
-
-
... More
CABLE Supply, laying testing and commissioning of L.T. Al. XLPE armoured / unarmoured cable confirming to IS : 7098 Part - II as per direction of engineer-in-charge as per the description given below: 4C x 95 sq.mm
40
-
-
... More
4 C x 50 Sqmm.
30
-
-
... More
12 C x 2.5 Sqmm.
30
-
-
... More
4 C x 16 Sqmm.
30
-
-
... More
CABLE END TERMINATION Supply, fixing, connection, testing and commissioning of double compression brass cable glands and crimping type lugs / sockets with necessary tools and equipments as specified in specifications and IS. The glands and lugs / sockets shall be suitable for cable size and type mentioned above. The job also includes, if necessary, supply and fixing of extension busbar of same material on circuit breaker / FSU or panel board terminal / connector to connect more than one no. of parallel cables or to connect higher size cable to lower size unit. The job also includes earthing the glands and armour of the cable with common earth bar or flexible copper mesh. 4C x 95 sq.mm
2
-
-
... More
4 C x 50 Sqmm.
16
-
-
... More
12 C x 2.5 Sqmm.
24
-
-
... More
4 C x 16 Sqmm.
16
-
-
... More
Providing and fixing Power wiring with 2 core x 1.5 sq.mm. PVC armoured copper cable for wiring pressure switches, etc. Including all required material and labour, terminations, etc. Complete.
160
-
-
... More
6 Kg ABC (Powder Type) Fire Extinguisher. In HP Mild Steel Cylinders ISI marked fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged with ABC powder (Mono Ammonium Phosphate) pressured by Nitrogen complete in all respects including wall suspension bracket and conforming to IS:15683
16
-
-
... More
ISI marked (IS:15683) portable AFFF Mechanical foamfire extinguisher, Foam type capacity 9 liters with gun metal cap and nozzle and complete in all respects including initial fill and wall suspension brackets
2
-
-
... More
ISI Marked portable fire extinguisher, 4.5 kg CO2 type fire extinguishers complete in all respect including initial fill and wall suspension brackets & shall conform to IS 15683
17
-
-
... More
Supplying and installing at approved location approved make fire buckets (2 nos./set) of 24 gauge galvanized steel sheet, standard 9 litre capacity and of round bottom shape, painted white inside and black on the bottom, inscribed with letters '' FIRE'' in black and gold with dry clean fire sand. The scope shall also include the stand for mounting the sand bucket.
3
-
-
... More
PUBLIC ADDRESS SYSTEM: Supply, Installation, testing and commissioning solid state Amplifier of 250 W RMS out put in rack, including necessory control wires, jocks etc. complete. Make- Bosch/Ahuja/
1
-
-
... More
Supply, Installation, testing and commissioning 6W wall mounted type speakers with talk back facility, in CRCA sheet fabricated housing, complete.
12
-
-
... More
Supply, Installation, testing and commissioning of 2 runs of 1.5 sq. mm, PVC insulated copper wires confirming to IS standards and specifications.Make-Polycab/RR kable/Finolex
600
-
-
... More
EXIT SIGNAGE AND EXIT LIGHT
Providing and Installation in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC non-reflective self adhesive vinyle painted foam board, complete with mirror fasteners.
-
-
-
... More
Signage with printed "IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED OTHERWISE" of 1.5cm height letters in red with white back ground.The size of the board shall be 300mm x 250mm and shall be fixed at the height of 1.5mts. from finished floor
6
-
-
... More
Floor indentification signage ( ie, GROUND FLOOR …etc.) at each stair enclosure on every floor, indicating the floor number in words, lettering size shall be 7.5 cm with contrasting colour from back ground.Size shall be 300mm x 150mm
12
-
-
... More
Providing and fixing the signages "Fire Exit, Fire Exit Arrow Down,Fire Exit Arrow Left,Fire Exit Arrow Right"of 1.5cm height letters in white with green back ground.The size of the board shall be 300mm x 150mm and shall be fixed at the height of 2 mts
60
-
-
... More
AIR CONDTIONER:Supply & Installation of 1.5Ton Split AC 3 Star(Make- Voltas/Carrier)
20
-
-
... More
Supply and Installation of 130-300V, 5 KVA Stabilizer( V-Guard/Microtek)
20
-
-
... More
Extra Copper Cooling Pipe
200
-
-
... More
Extra Drain Pipe
200
-
-
... More
MS Stand for Out door unit
20
-
-
... More
Installation Charge
20
-
-
... More
INTERNAL EI:Recessed wiring to Group -B light /Fan/ Exhaust fan/Call bell point with 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia medium class PVC conduit with 6Amp, 250V Modular switch ISI marked and ceiling rose ISI marked mounted on metal box having front Modular cover of suitable size, metal box with 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. (Make of wire-L&T/ Anchor/ Havells/ V-Guard/ RR KABEL) )
400
-
-
... More
Recessed wiring to Group -C light /Fan/ Exhaust fan/Call bell point with 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia medium class PVC conduit with 6Amp, 250V Modular switch ISI marked and ceiling rose ISI marked mounted on metal box having front Modular cover of suitable size, metal box with 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. (Make of wire-L&T/ Anchor/ Havells/ V-Guard/ RR KABEL) )
400
-
-
... More
Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6Amp switch and socket of Modular type including all connection. (Make- Legrand / Roma/ Havells)
150
-
-
... More
Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6Amp & 16Amp socket outlet and 16Amp Modular switches connection. (Make- Legrand / Roma/ Havells)
27
-
-
... More
S/F of multipurpose board Modular 6A 3nos. Switch and 3nos. Socket and 1no. Switch and socket 15A on Modular board and cover. (Make- Legrand / Roma/ Havells)
50
-
-
... More
Supply and fixing of Electronics step type Modular fan regulator. (Make- Legrand / Roma/ Havells)
180
-
-
... More
Supply and fixing of 6Amp plug with 6Amp switch on existing board. (Modular type)(Make:-Legrand / Roma/ Havells)
124
-
-
... More
Recessed wiring to submain in 2 x 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor of ISImarked confirming to IS-694/1990 in 20 mm dia medium class PVC conduit 1.6 mm thick alongwith 1 x 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire as equired.(Makeof wire Finolex/L&T/Anchor/Havels/V Guard)
1600
-
-
... More
Recessed wiring to submain in 2 x 2.5 sq.mm FRLS PVC insulated single core multistrand copper conductor of ISImarked confirming to IS-694/1990 in 20 mm dia medium class PVC conduit 1.6 mm thick alongwith 1 x 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire as equired.(Makeof wire Finolex/L&T/Anchor/Havels/V Guard)
4125
-
-
... More
Recessed wiring to submain in 2 x 4 sq.mm FRLS PVC insulated single core multistrand copper conductor of ISImarked confirming to IS-694/1990 in 20 mm dia medium class PVC conduit 1.6 mm thick alongwith 1 x 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire as equired.(Makeof wire Finolex/L&T/Anchor/Havels/V Guard)
1100
-
-
... More
Recessed wiring to submain in 2 x 6 sq.mm FRLS PVC insulated single core multistrand copper conductor of ISImarked confirming to IS-694/1990 in 25 mm dia medium class PVC conduit 1.6 mm thick alongwith 1 x 2.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire as equired.(Makeof wire Finolex/L&T/Anchor/Havels/V Guard)
1550
-
-
... More
Recessed wiring to submain in 4 x 6 sq.mm FRLS PVC insulated single core multistrand copper conductor of ISImarked confirming to IS-694/1990 in 32 mm dia medium class PVC conduit 1.6 mm thick alongwith 2 x 2.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire as equired.(Makeof wire Finolex/L&T/Anchor/Havels/V Guard)
730
-
-
... More
Recessed wiring to submain in 4 x 10 sq.mm FRLS PVC insulated single core multistrand copper conductor of ISImarked confirming to IS-694/1990 in 32 mm dia medium class PVC conduit 1.6 mm thick alongwith 2 x 4 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire as equired.(Makeof wire Finolex/L&T/Anchor/Havels/V Guard)
355
-
-
... More
Recessed wiring to submain in 4 x 16 sq.mm FRLS PVC insulated single core multistrand copper conductor of ISImarked confirming to IS-694/1990 in 40 mm dia medium class PVC conduit 1.6 mm thick alongwith 2 x 10 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire as equired.(Makeof wire Finolex/L&T/Anchor/Havels/V Guard)
180
-
-
... More
Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution 415V on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (But without MCB/ RCCB/ Isolator) make-(Make-Legrand Ekinox3 ETPN/Scnider Acti 9)
4 Way(8+12) Way TPN MCB DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door
14
-
-
... More
Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution 415V on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (But without MCB/ RCCB/ Isolator) make-(Make-Legrand Ekinox3 ETPN/Scnider Acti 9)
6 Way(8+18) Way TPN MCB DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door
7
-
-
... More
Supply and fixing of 5Amp to 32A rating 240 V/415 V "B" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make-Legrand DX3/Scnider Acti 9/L&T) 6 amps to 32 amps rating, 240 volts, C series, single poles MCB
244
-
-
... More
Supplying and fixing 40 Amps rating, TPN, 415 volts, RCCB,300mA Legrand/Snheider/Siemens make or any other reputad equevallent A catagories make ISI marked as approved in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .(4W TPN BDB IC)AC ODU CONTROLLER)
2
-
-
... More
Supplying and fixing 25Amps DP 240 volts, RCCB,300mA Legrand/Snheider/Siemens make or any other reputad equevallent A catagories make ISI marked as approved in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.
82
-
-
... More
Supplying and fixing 63Amps TPN 415 volts, RCCB,300mA Legrand/Snheider/Siemens make or any other reputad equevallent A catagories make ISI marked as approved in the existing MCB DB complete with connections.(for power BDB & AC ODU, 8 way TPN BDB IC)
26
-
-
... More
S/IT/C Of Earthing with copper earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-Charge.
10
-
-
... More
Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
100
-
-
... More
Refilling/Back filling soft soil with borrowed within a lead of 5 K.M. etc. as required as per direction of Engg.-in-Charge.
30
-
-
... More
Excavation of hard-rock up to 3 meters depth including getting out the excavated soil disposal of the excavated soil as directed with lead of 50 meters as per direction of Engg.-in-Charge.
30
-
-
... More
Supplying and making brick massonary pedastal with extra super structure including cement plastering etc as required as per direction of Engg.-in-Charge.
10
-
-
... More
Extra for using salt and charcoal for G.I or copper pipe earth elctrrode as required
40
-
-
... More
Extra for using salt and charcoal for G.I or copper plate earth as required
40
-
-
... More
Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover of Anchor make .as required as per direction of Engg.-in-Charge
19
-
-
... More
Supplying, installation, of exhaust fan of heavy duty 380 mm sweep 1400 rpm with louvers (Make-Havells/almonard/cromptron/Halonix/bajaj make or any other equivalent reputed make star rated as approved) of exhaust fan in the existing wall, including fixing & conntection .as required as per direction of Engg.-in-Charge
37
-
-
... More
Supplying, installation, testing and commssioning of 1400 mm sweep white/milky colour ceiling fan of Havells velocity/ CROMPTRON JURA/Halonix/Bajaj Make or any other equivalent reputed make star rated as approved including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required.(With fan Regulator) as required as per direction of Engg.-in-Charge
180
-
-
... More
Supplying and fixing of Energy efficient Recess mounted LED luminaire made up of Die cast Alluminium / CRCA steel of 600 X 600 mm size with of watt not more than 36W and system lumens output not less than 3100 lumens/watt, with Highly efficient PMMA diffusers for better light transmission and pure effect,with High luminous flux LEDs for better light output,CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%, complete with electronic driver and all other accessories suitable for operation on 230 V, 50 Hz supply .as required as per direction of Engg.-in-Charge (Make: WIPRO model no: CRCO10R038HP57GL or similar of /PHILIPS/Bajaj /Halonixmake)
45
-
-
... More
Supplying and fixing of Energy efficient surface/Concealed mounted LED luminaire made up of CRCA powder coated housing, bottom frame and reflector of 595 X 595 mm size with of 40-42W and system lumens output not less than 4000 lumens/watt, Option of Satin finish High Efficiency Translucence (HET) diffuser/clear acrylic diffuser sealed with bottom frame using non-hygroscopic VHB gasket to ensure dust proofin,with High luminous flux LEDs for better light output,CRI not less than 80, CCT of5700-6500 degree K, THD less than 10%, complete with electronic driver and all other accessories suitable for operation on 230 V, 50 Hz supply as required as per direction of Engg.-in-Charge. (Make:WIPRO model no: LC20-551-XXX-57-XX or similar of /PHILIPS/ Trilux /Osram/Halonix/Bajaj make )Each OT/ICU AREA LIGHT
60
-
-
... More
Supplying and fixing of Energy efficient surface mounted LED luminaire with white powder coated ,pressure die-cast Al housing ,with high transmititivity,non-yellowing PMMA diffuser, with wattage not more than 18 watt and lumen output not less than 80 lumens/watt,CRI not less than 80,CCT of 5700-6500 degree K,THD less than 10%, with electronic driver and all other accessories suitable for operation on 230 V, 50 Hz supply as required as per direction of Engg.-in-Charge. ( Make : WIPRO Model No:LD80-171-XXX-60-SM similar make of /Trilux/Osram/PHILIPS/Halonix/Bajaj)
44
-
-
... More
SITC of energy efficient LED tube light fittings with decorative batten and LED tube light having power rating not more than 20 watt and lumen output not less than 1800 lumen complete with electronic driver and all other accessories with diffuser i/c connection etc as required. (Similar to WIPRO Model No:LL20-221-XXX-65NE1 or similar make of /PHILIPS/Bajaj/Halonix)
180
-
-
... More
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge .
(Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.
180
-
-
... More
Supply , installation testing and commissioning of 10Watts LED bulkhead wall mounted type light fitting with all accessories as required-(Wether Proof)
8
-
-
... More
S/F of 400mm wall mounted fan (Make:Usha/Bajaj)
27
-
-
... More
S/F OF 9 Wt led lamp of reputed make (make: philips/Havels/C&S) including cost of all materials, all labour, labour cess, T&P etc complete
200
-
-
... More
Supply ,installation, testing and commissioning of main switches (IS 13940 part-3/1993) of following capacity on existing surface / wall mounting and completer with HRC fuse links, interconnections, earthing , etc as required as per direction of Engineer-in-charge. (Make- HPL/ Anchor/ RK/ Hercules/ Benlo)
63Amp ICTPN Main switch on MS angle frame
4
-
-
... More
Supply and fixing of copper bus bar with suitable sheet metal enclosure on MS angle frame with proper grouting on wall including all connections. 63Amp TPN bus bar -19 X 3mm size copper flat
4
-
-
... More
Supply and Laying of 50sqmm 3 1/2 core PVC armored Alluminium cables ISI marked on wall surface.(Make- Glowstar/ Polycab/ Nicco/ KEI/ HPL/ Mescab)
430
-
-
... More
Supply and Laying of 70sqmm 3 1/2 core PVC armored Alluminium cables ISI marked on wall surface.(Make- Glowstar/ Polycab/ Nicco/ KEI/ HPL/ Mescab)
252
-
-
... More
Supply and Laying of 300sqmm 3 1/2 core PVC armored Alluminium cables ISI marked on wall surface.(Make- Glowstar/ Polycab/ Nicco/ KEI/ HPL/ Mescab)
63
-
-
... More
Supply and making end termination with brass compression gland and aluminium logs for 3 1/2 X 50sqmm of PVC insulated and PVC sheathed / XLPE aluminium cable of 1.1kv grade (without cost of cable ) as required.
12
-
-
... More
Supply and making end termination with brass compression gland and aluminium logs for 3 1/2 x 70sqmm of PVC insulated and PVC sheathed / XLPE aluminium cable of 1.1kv grade (without cost of cable ) as required
4
-
-
... More
Supply ,Fixing,Cutting and threading of down rod of extra down rod of 20mm dia for 20cm x 5
180
-
-
... More
Supply and fixing of A.B holder ISI marked including connections etc as required. (Make- Anchor/ Cona/ Havels/ Great White)
200
-
-
... More
Supply and fixing of 40mm dia GI Street light bracket. (1mtr long)
16
-
-
... More
16/ 18 SWG pannel box (36 X36X8) OF 6 (SIX) NOS TO BE USED AS FLOOR EMERGENCY SUBPANEL AND OT SUB PANEL AND ICU SUBPANEL AND (72X72X12) OF 2 (TWO NOS) TO BE USED AS EMERGENCY PANEL AND NORMAL MAIN PANEL sq. inch for single door made out of CR sheet of 16SWG and boarder angle frame to provide above pannel with proper space ,hinges, and other accessories , hinged door must be painted with powder coated.
186624
-
-
... More
Supply and fixing of internal wiring to equipment installed in the pannel board with required size of copper multistrand single core cables duly crimped with copper lugs and all connections 36 X 24 including cost of copper conductor and other fittings like gasket ,screw , nut and bolt , insulating materials etc.
18144
-
-
... More
S/F of copper bus bar 50 x 8mm with required size of insulating material and nut and bolts.
16
-
-
... More
S/F of copper bus bar 35 x 5mm with required size of insulating material and nut and bolts.
16
-
-
... More
S/F of transparent glass for isolation L X B =sq.inch
18144
-
-
... More
Floor rubber mat 6'x4' x 6mm
8
-
-
... More
Base channel 50 X 50 X 8mm
200
-
-
... More
Supply and fixing of Ammeter with selector switch including all connections
8
-
-
... More
Supply and fixing of voltmeter with selector switch including all connections
8
-
-
... More
Supply and fixing of Indicator lamp with toggler switch and fuse
32
-
-
... More
Supply and fixing of C.T coil upto 400Amp including all connections
32
-
-
... More
Supply and fixing of First Aid box including all accessories.
8
-
-
... More
Supply and fixing of Shock Treatment Chart including all accessories.
8
-
-
... More
Supply and fixing of 63Amp 18KA 4pole MCCB in existing cubicle pannel board including drilling holes in cubicle panel, making connections, etc as required.(Make-L&T/ C&S/ Havells/ Legrand)
43
-
-
... More
Supply and fixing of 125Amp 25KA 4pole MCCB in existing cubicle pannel board including drilling holes in cubicle panel, making connections, etc as required.(Make-L&T/ C&S/ Havells/ Legrand)
7
-
-
... More
Supply and fixing of160Amp 35KA 4pole MCCB in existing cubicle pannel board including drilling holes in cubicle panel, making connections, etc as required.(Make-L&T/ C&S/ Havells/ Legrand)
6
-
-
... More
Supply and fixing of 200Amp 35KA 4pole MCCB in existing cubicle pannel board including drilling holes in cubicle panel, making connections, etc as required.(Make-L&T/ C&S/ Havells/ Legrand)
4
-
-
... More
Supply and fixing of 250A 35KA 4pole MCCB in existing cubicle pannel board including drilling holes in cubicle panel, making connections, etc as required.(Make-L&T/ C&S/ Havells/ Legrand)
1
-
-
... More
Supply and fixing of 400Amp 36KA 4pole MCCB in existing cubicle pannel board including drilling holes in cubicle panel, making connections, etc as required.(Make-L&T/ C&S/ Havells/ Legrand)
2
-
-
... More
Supply and fixing of 630Amp 50KA4pole MCCB in existing cubicle pannel board including drilling holes in cubicle panel, making connections, etc as required.(Make-L&T/ C&S/ Havells/ Legrand)
1
-
-
... More
S/ F of No.8 G.I wire as earth continuity on wall surface/ recess
340
-
-
... More
S/ F of No.8 copper wire as earth continuity on wall surface/ recess
220
-
-
... More
Supply and fixing of Modular blank plate
100
-
-
... More
S/F of 25 Amp modular single phase stater for AC Point
45
-
-
... More
AIR TERMINAL & ACCESSORRIES LIGHTNING ARRESTER+ MAST: Providing and fixing of lightning conductor finial made of 25 mm dia 300 mm long, G.I tube,having single prong at top, with 85 mm dia 3 mm thick G.I base plate including holes etc complete as required with as per direction of Engg.-in-Charge.
14
-
-
... More
Reveting, sweating and soldering of copper / G.I. tape ( with another copper / G.I. tape, base of the finial or any other metallic object) as required .as per direction of Engg.-in-Charge.
121
-
-
... More
Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run) as per direction of Engg.-in-Charge.
121
-
-
... More
Providing and fixing of G.I. tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For virtical run) as per direction of Engg.-in-Charge.
111
-
-
... More
Providing and fixing of testing joint, made of 20 mm x 3 mm thick G.I. strip, 125 long with 4 nos of G.I. bolts, check nuts and spring washer etc complete as required as per direction of Engg.-in-Charge.
25
-
-
... More
Providing and laying of G.I. tape 32 mm x 6 mm from earth electrode directly in ground as required as per direction of Engg.-in-Charge. .(RATE REFERING OSR 2018 SOR NO-4.14)
35
-
-
... More
Supplying, Erection, Fixing, connection & testing of LED Street Light of WIPRO WEATHER PROOF LR 02-781-XXX-57-XX or equvalant reputed make ISI marked as approved make with specification LED Luminarie 60 Watt with 9 meter Velmond make maintenance freeG.I POLE with braket including MCB box & including photo sensor with foundation as per the Drawing for inspection as required & as per direction of Engg.-in-Charge. (Wipro/Philips/Bajaj/Havells/Halonix/eq make)
10
-
-
... More
Supplying, Erection, Fixing, connection & testing of LED Flood Light of LF20-132-060-57-G2 WIPRO MAKE or equvalant reputed make ISI marked as approved make with specification LED Luminarie 120 Watt with maintenance freeG.I cover box including MCB box & including photo sensor with foundation as per the Drawing for inspection as required & as per direction of Engg.-in-Charge. (Wipro/Philips/Bajaj/Havells/Halonix/eq make)
8
-
-
... More
Supply & Installation of LED Base Glow Sign Board at MCH Daspala (Odiya & English) Board Size 3.6 feet X 24 feet
1
-
-
... More
Diesel Engine:Providing ,installing, testing and commissioning of "Silent Type" Diesel Generating set along with having prime power rating of 125 KVA, 415 Volts at 1500 RPM,0.8 lagging power factor at 415 Volt suitable for 50 Hz 3 phase system & 0.85 load factor and consisting of following.
1
-
-
... More
Diesel engine 4 stroke water cooled,electric start of suitable BHP at 1500 RPM suitable for above output of alternator at 40 degree C,50% RH & 1000 Meter MSL and confirming to BS 5514,BS 649,IS 10000 capable of taking 10% overloading for one hour after 12 hours of continuous operation.The enginee will be fitted complete with all the required accessories.
-
-
-
... More
Enginee Mounted Instrument Panel fitted with and having digital display of following: Start stop switch with key,water temperature indication,lubrication oil pressure indication,lubrication oil temperature indication,battery charging indication,RPM indication,Over speed indication,Low lub.Oil trip indication,Engine Hours indication
-
-
-
... More
Alternator: Synchronous alternator rated at 125 KVA, 415 Volts at 1500 RPM,0.8 lagging power factor at 40 degree C,50% RH & 1000 Meter MSL.The alternator shall be having SPDP enclosure, brushless continuous duty, self excited and self regulated through AVR conforming to IS: 4722/BS 2631 suitable for tropical condition and with class F/H insulation.
-
-
-
... More
Base frame & Foundation: Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforecment which shall be installed on suitable cement concrete foundation and vibration isolation arrangement as per recommenadation of manufacturer.
-
-
-
... More
Exhaust system: Dry exhaust mainfold with hospital exhaust silencer and catalytic converter.
-
-
-
... More
Starting System:12V/24V DC starting system comprising of starter motors,voltage regulator and arrangement for initial excitation complete with suitable no of batteries (25 plates,180Amp hour capacity lead acid type ) as required per specification.
-
-
-
... More
Accoustic and weather proof enclosure with arrangement of fresh air intake for cooling of the engine & alternator, discharging hot air into atmosphere as per specification.
-
-
-
... More
Fabricating,installing,testing,commissioning of automatic main failure control including auto by-pass panel suitable for 125 KVA silent type DG set complete with relays, timers, set of CTs for metering and protection and energy analyser to indicate currents,phase line voltage,frequency, power factor, KWH,KVarH and provision of overload,short circuit,restricted earth fault, under frequency, control cabling from AMF panel to diesel engine and elsewhere if required, all complete and interlocking including following:
-
-
-
... More
required rating of 4 pole SDFU/4 pole manual darw out/Motorised electrically opearted draw out with cradle type 3 position ACB with electromagnetic/electronic release for O/C & E/F and shunt trip.
-
-
-
... More
Auto/Manual/Test/Off selector switch, 2 Nos of over voltage relay,2 nos of reverse power relay and 2 nos of under voltage relay, 3 sets of current transformers 15P 10 accuracy for protection and 15 VA class-I metering
-
-
-
... More
Battery charger complete with transformer/rectifier, DC voltmeter and ammeter, selector switch for trickle, off and boost and current adjustment.
-
-
-
... More
Main supply failure monitor,Supply failure timer,restoration timer, Control unit with three impusle automatic engine start/stop and failure to start lock out,impulse counter with locking and reset facility,ON/OFF/Control circuit switch with indicator,audio/video annunciation for high water temperature, Low lubricating oil pressure,Engine Overspeed, Engine fails to start, full load/maximum load warning
-
-
-
... More
Supply and fixing exhaust gas piping of suitable dia, welded back MS, B class pipe conforming to IS:3589 cut to required lengths and installed with necessary bends,support and clamps,anti vibration mounting,insulation of exhaust system with mineral wool/rockwool 50 mm thick wiremesh and aluminum cladding etc as per required specification.
-
-
-
... More
LIFT:Supply installation testing commissioning of 16 passenger (1088Kgs) cum bed lifts with ARD having contract speed of 0.5 MPS serving different floor of existing lift shaft as per detailed specification enclosed as per estimate
2
-
-
... More
Internal PH Works
-
-
-
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC/GI pipes conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In ground floor
-
-
-
... More
20mm dia CPVC pipe
30
-
-
... More
25mm dia CPVC pipe
20
-
-
... More
32mm dia CPVC pipe
50
-
-
... More
In first floor
-
-
-
... More
In first floor
20mm dia CPVC pipe
40
-
-
... More
25mm dia CPVC pipe
40
-
-
... More
32mm dia CPVC pipe
40
-
-
... More
In second floor
-
-
-
... More
20mm dia CPVC pipe
30
-
-
... More
25mm dia CPVC pipe
30
-
-
... More
32mm dia CPVC pipe
30
-
-
... More
In Third floor
-
-
-
... More
20mm dia CPVC pipe
20
-
-
... More
25mm dia CPVC pipe
20
-
-
... More
32mm dia CPVC pipe
30
-
-
... More
50mm dia G.I pipe
100
-
-
... More
Supplying all materials, labour,T&P and painting two coats with white enamel paint brushing interior over one coat of priming with red oxide zinc chrome primer on the external surface of new galvanised mild steel tubes and fittings of following nominal diameter to give an even shade including preparing the surface and clearing the surface of all all dirts, dusts and foreign matters as per direction of the Engineer in charge .
-
-
-
... More
In Third floor 40 to 50mm dia GI pipe
100
-
-
... More
Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.
-
-
-
... More
In ground floor 250mm thick wall
8
-
-
... More
In first floor 250mm thick wall
11
-
-
... More
In second floor 250mm thick wall
8
-
-
... More
In Third floor 250mm thick wall
5
-
-
... More
Supplying all materials, labour, T&P and cutting hole in R.C.C chajja, for taking H.C.I/SWR pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of the Engineer in charge.
-
-
-
... More
In ground floor
9
-
-
... More
In first floor
9
-
-
... More
In second floor
9
-
-
... More
In Third floor
9
-
-
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge.
-
-
-
... More
In ground floor
50
-
-
... More
In first floor
80
-
-
... More
In second floor
60
-
-
... More
In Third floor
40
-
-
... More
Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge
-
-
-
... More
15 mm dia CP LB Bibcock (Jaquar)CON-CHR-107KN
26
-
-
... More
15mm dia CP angle stop cock (Jaquar)CON-CHR-053KN
49
-
-
... More
20mm dia CP concealed stop cock (Jaquar)CON-CHR-083KN
17
-
-
... More
15 mm dia CP two way Bib cock (Jaquar)CON-CHR-041KN
12
-
-
... More
15mm CP Health faucet (Jaquar)ALD-CHR-573
10
-
-
... More
15mm dia CP flange
104
-
-
... More
15mm dia CP extension piece
102
-
-
... More
125mm dia CP grating
24
-
-
... More
25mm dia brass or gun metal fullway valve(Shakti Make)
12
-
-
... More
32mm dia brass or gun metal fullway valve(Shakti Make)
8
-
-
... More
50mm dia brass or gun metal fullway valve(Shakti Make)
4
-
-
... More
50mm dia gun metal horizontal check or non-return valve
2
-
-
... More
Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
10 litres capacity pvc low level cistern with 32mm dia CP long flush bend (Slimline-white)
22
-
-
... More
Construction of 20000 Liters RCC Over head Tank of Inside size- 6.00 X 3.00 X1.50m(In Fourth floor)
-
-
-
... More
Supplying all materials, labour,T&P and providing cement concrete (1:1.5:3) for RCC work using 12mm HG chips including hoisting,laying,curring and conveyance of all materials to site etc complete.
16.76
-
-
... More
Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage.
16.76
-
-
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete.
-
-
-
... More
RCC floor roof, chajja etc
46.25
-
-
... More
RCC Beam, Column, wall etc
92.45
-
-
... More
Supplying all materials, labour,T&P and providing 6mm thick cement plasster (1:4) over CC work including watering curring and conveyance of all materials to site.
52.2
-
-
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site.
52.2
-
-
... More
Providing fitting and fixing stainless steel ladder including fixing to wall necessary welding etc. complete
60
-
-
... More
Providing fitting and fixing MS cover made out of MS angle and sheet duly welding and fixing with frame and hinges along with locking arrangement of size 60cmx60cm etc complete as per direction of Engineer-in-charge
40
-
-
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge
-
-
-
... More
110mm dia U-PVC SWR pipe(Supreme/Ashirvad)
300.05
-
-
... More
110mm U-PVC door cross Tee
9
-
-
... More
110mm U-PVC door Tee
12
-
-
... More
110mm U-PVC door bend
32
-
-
... More
110mm U-PVC plain bend
14
-
-
... More
110mm dia U-PVC offset without ear
48
-
-
... More
110mm dia U-PVC plain shoe bend
18
-
-
... More
110mm dia U-PVC cowl
9
-
-
... More
Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge
-
-
-
... More
250mm to 375mm thick wall
48
-
-
... More
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
E.W.C.with S/P trap(Parryware/Hindware/Neycer)
10
-
-
... More
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan conforming to IS:2556-part-3-2004) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
580mm dia Orissa Pan(Parryware/Hindware/Neycer/Cera)
12
-
-
... More
Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make), etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
(CAT No-10095-Under counter Basin(Lara)+ ALD-CHR-709+ALD-CHR-803AB+KUB-CHR-35001)
10
-
-
... More
550x400 mmsize W.H.Basin with porcelain Pedestal
10
-
-
... More
Supplying all materials, labour, T&P and providing Granite slab urinal partition wall including cutting grooves in wall and making good the damages including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge ,
18
-
-
... More
Supplying all materials, labour, T&P and fixing wash kichen sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
600mmx450mmx250mm Stainless Steel sink(Jayana make)
4
-
-
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge
-
-
-
... More
600mmx450mm size B.E mirror
10
-
-
... More
Large size mirror with frame
4.5
-
-
... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
25mmx600mm long CP towel rail
20
-
-
... More
CP towel ring rail
10
-
-
... More
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
CP soap holder
22
-
-
... More
Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter with FRP frame of size 45x90mm.(Darwaja /Exon Door make)
53.76
-
-
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etcall complete as per direction of the Engineer in charge.
-
-
-
... More
In ground floor
8.3
-
-
... More
In first floor
1.3
-
-
... More
In second floor
1.3
-
-
... More
In Third Floor
0.86
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
-
-
-
... More
In ground floor
2.77
-
-
... More
In first floor
0.43
-
-
... More
In second floor
0.43
-
-
... More
In Third Floor
0.29
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In ground floor
2.77
-
-
... More
In first floor
0.43
-
-
... More
In second floor
0.43
-
-
... More
In Third Floor
0.29
-
-
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In ground floor
105.63
-
-
... More
In first floor
171.99
-
-
... More
In second floor
121.17
-
-
... More
In Third Floor
72.87
-
-
... More
Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. (Ceramic tile 30cmx30cm Kajaria/Somany/Johnson/Orient Bell super premium to be pre-approved by the Engineer in charge)
-
-
-
... More
In ground floor
27.68
-
-
... More
In first floor
45.47
-
-
... More
In second floor
30.12
-
-
... More
In Third Floor
19.24
-
-
... More
Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. (Glazed tile 45cmx30cm Kajaria/Somany/Johnson premium to be pre-approved by the Engineer in charge)
-
-
-
... More
In ground floor
105.63
-
-
... More
In first floor
171.99
-
-
... More
In second floor
121.17
-
-
... More
In Third Floor
72.87
-
-
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork with cement punning and bitumen painting over top of wall including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In first floor
6.08
-
-
... More
In second floor
6.08
-
-
... More
In Third Floor
4.05
-
-
... More
Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, KB brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge
-
-
-
... More
Inside size 250mmx250mm
7
-
-
... More
Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class KB brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
-
-
-
... More
Inside size 760mmx760mmx460mm
7
-
-
... More
Sinking of tube well -1 No (200/150)
-
-
-
... More
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
-
-
-
... More
Drilling of 200mm dia bore
-
-
-
... More
00 mtr to 30mtr
30
-
-
... More
Drilling of 200mm dia bore
-
-
-
... More
31 mtr to 45mtr
15
-
-
... More
Drilling of 150mm dia bore
-
-
-
... More
30 mtr to 100mtr
74.5
-
-
... More
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
-
-
-
... More
Lowering of 200mm dia P.V.C casing pipes
-
-
-
... More
00 mtr to 30 mtrs
30
-
-
... More
Lowering of 200mm dia P.V.C casing pipes
-
-
-
... More
31 mtr to 45 mtrs
15
-
-
... More
Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.
-
-
-
... More
200mm dia PVC (sch-80) pipe
46
-
-
... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
-
-
-
... More
By DTH Rig
1
-
-
... More
Supplying all materials and labour, tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied by the Department)
-
-
-
... More
Sanitary sealing upto 5 mtrs below ground level
-
-
-
... More
Labour charges
1
-
-
... More
C.C(1:2:4)
0.2
-
-
... More
EXTERNAL P.H.WORK
-
-
-
... More
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type (Horizontal)submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
2 H.P three phase 7 stage head range 47 to 76 metres, discharge 170 to 67 L.P.M with outlet dia of 50mm
2
-
-
... More
3 H.P three phase 7 stage head range 47 to 76 metres, discharge 170 to 67 L.P.M with outlet dia of 50mm (Horizontal)
2
-
-
... More
DOL Control panel
4
-
-
... More
40mm dia steel short piece
4
-
-
... More
Well cap
2
-
-
... More
50mm size CI bracket
4
-
-
... More
4.50sqmm flat cable
200
-
-
... More
Steel rope with cover
140
-
-
... More
Labour charges for lowering including transportation
3
-
-
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge
-
-
-
... More
40mm HDPE pipes
120
-
-
... More
50mm HDPE pipes
120
-
-
... More
Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
-
-
-
... More
Man hole chamber Inside size 910mmx910mmx910mm
6
-
-
... More
---- do --- addl depth of 0.30m upto 4.50m depth
6
-
-
... More
R.C.P.C Cover(18" round man hole cover)
14
-
-
... More
Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class Fly ash brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
-
-
-
... More
Brick masonry soakway pit 1.40m dia x 2.00m deep
2
-
-
... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3 (0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.
-
-
-
... More
110mm dia u-pvc pipe alround concrete
20.65
-
-
... More
160mm dia u-pvc pipe alround concrete
78
-
-
... More
Construction of 100 users RCC septic tank-1 Nos
-
-
-
... More
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.
59.4
-
-
... More
Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.
29.7
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm size hard broken granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
G.Floor
5.94
-
-
... More
Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
57.2
-
-
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In ground floor (inside/outside)
57.2
-
-
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
R.C.C floor and roof slabs up to 4.30m height
30.9
-
-
... More
R.C.C beams,columns,girder and bressmer etc.
86.4
-
-
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In ground floor
22.3
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In ground floor
27.87
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In ground floor
2.7
-
-
... More
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
6
-
-
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
10.8
-
-
... More
Supplying all materials, labour,T&P and providing 25mm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips on new work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
33.25
-
-
... More
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 80 PSS UV of size 750x570x1350mm height with water storage capacity 80 liters along with 2 nos of faucets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge.
-
-
-
... More
Aquaguard cooler cum purifier (pure chill 80ssUV)
4
-
-
... More
Sinking of tube well -1 No (200/150)
-
-
-
... More
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
-
-
-
... More
Drilling of 200mm dia bore
-
-
-
... More
00 mtr to 30mtr
30
-
-
... More
Drilling of 200mm dia bore
-
-
-
... More
31 mtr to 45mtr
15
-
-
... More
Drilling of 150mm dia bore
-
-
-
... More
30 mtr to 100mtr
74.5
-
-
... More
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
-
-
-
... More
Lowering of 200mm dia P.V.C casing pipes
-
-
-
... More
00 mtr to 30 mtrs
30
-
-
... More
Lowering of 200mm dia P.V.C casing pipes
-
-
-
... More
31 mtr to 45 mtrs
15
-
-
... More
Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.
-
-
-
... More
200mm dia PVC (sch-80) pipe
46
-
-
... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
-
-
-
... More
By DTH Rig
1
-
-
... More
Supplying all materials and labour, tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied by the Department)
-
-
-
... More
Sanitary sealing upto 5 mtrs below ground level
-
-
-
... More
Labour charges
1
-
-
... More
C.C(1:2:4)
0.2
-
-
... More
Construction of 50000 Liters RCC Under ground Reserver of Inside size- 7.00 X 3.50 X2.30m
-
-
-
... More
Earth work in excavation of foundation in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.
67.86
-
-
... More
-do- with Ist additional depth of 1.50 m over the initial lead and lift
63.34
-
-
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
11.18
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
7.45
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1½:3)with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
31.42
-
-
... More
Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage.
31.42
-
-
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor.
-
-
-
... More
RCC floor roof, chajja etc
29.1
-
-
... More
RCC Beam, Column, wall etc
117.48
-
-
... More
RCC Plinth bend/ Raft
20.32
-
-
... More
Supplying all materials, labour,T&P and providing 6mm thick cement plasster (1:4) over CC work including watering curring and conveyance of all materials to site.
86.8
-
-
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site.
86.8
-
-
... More
Supplying and fitting and fixing stainless steel 34 grade in said rail using 5mm dia 2mm thick circular pipe and balustrade 32mmx32mmx2mm at the rate of mtr.Center to center and square pipe 32x32x2mm below including welding with stanless steel elect rod and fixing with necessary accessories etc.complete as per direction of the Engineer-in-charge.
80
-
-
... More
Providing fitting and fixing RCPC cover etc complete as per direction of Engineer-in-charge
2
-
-
... More
Supplying all materials, labour, T&P and providing chequered tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc all complete as per direction of the Engineer in charge
55.6
-
-
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor G.I pipes /PVC Pipes and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge.
-
-
-
... More
In Ground floor
-
-
-
... More
50 mm dia G.I.Pipe(Medium)
10
-
-
... More
RCPC MH Cover(24"Round Man Hole Cover)
2
-
-
... More
RAIN WATER HARVESTING SYSTEM(PIT)
-
-
-
... More
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.
66.69
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
1.08
-
-
... More
Supplying all materials, labour, T&P and providing brick work with Fly ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:6) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
10.15
-
-
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork with cement punning and bitumen painting over top of wall including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
91.2
-
-
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
48.6
-
-
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
R.C.C floor and roof slabs, landings, balconies, projecting sunshades and
3.13
-
-
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In ground floor
0.34
-
-
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1½:3)with 12mm size hard broken granite chips including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
In ground floor
0.42
-
-
... More
providing and filling filter media
-
-
-
... More
40mm Boulder--
12.75
-
-
... More
20mm washed gravel-
6
-
-
... More
Course sand-
4.5
-
-
... More
Providing fitting & fixing M.S.grill cover over the harvesty pindi
3
-
-
... More
Supplying all materials, labour, T&P and constructing surface drain of size A-4 type with cement concrete (1:3:6) using 12mm size h.g chips on bed, 1st class Fly ash brickwork in cement mortar (1:3) inside, 12mm thick cement plaster (1:3) finished smooth with cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
-
-
-
... More
A-4 drain
150
-
-
... More
Sinking of tube well(200) for PIT
-
-
-
... More
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
-
-
-
... More
Drilling of 200mm dia bore
-
-
-
... More
00 mtr to 30mtr
25
-
-
... More
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
-
-
-
... More
200mm dia PVC pipe
25
-
-
... More
Cost of 200mm pvc pipe
25
-
-
... More
Cutting slot in casing pipe for recharge of rain water
25
-
-
... More
labour for packing gravel outside the tube well
-
-
-
... More
25x22/28(0.40x0.40-0.20x0.20)=
2.36
-
-
... More
Cost of washed gravel
2.35
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements