Works Department Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 1,15,100Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_EICCL_60752_3Bid Award Id
ViewTender No
S.E.Ctc.(RandB)16/2019-20Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Filling foundation and plinth with good quality river sand with watering and ramming incluing cost, conveyane, cost of all materials and labour etc complete as per direction and specification of Engineer in charge
589.88
-
279.08
... More
Cement concrete (1:3:6) in foundation and plinth using 4cmsize hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete watering, curing etc, complete to required levels laid in layers to required thickness including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge
114.99
-
4533.19
... More
Fly Ash Bricks masonry (25cmx12cmx8cm) having crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before use in Foundation and Plinth and for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc. complete along with testing of strength as per relevant I.S.standard andas per specification & direction of Engineer-in-charge.
19.53
-
4107.79
... More
RCC work of M-20 Grade with 20mm and down graded size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts including frame works including cost, conveyance, cost of all labour, T&P, cost of all materials etc. complete as per direction and specification of Engineer-in-charge. Pile Cap
136.76
-
5296
... More
Grade Beam
12.24
-
5296
... More
Column Superstructure
24.11
-
10463.63
... More
1st floor
3
-
11665.48
... More
Lintel GF
6.4
-
8407.41
... More
1st floor
0.95
-
9198
... More
Chajja GF
4.86
-
771.73
... More
1st floor
1.58
-
868.17
... More
Roof Beam GF
28.04
-
9765
... More
1st floor
1.59
-
11665.48
... More
Stair case and Ramp GF
4.22
-
9992.99
... More
Roof Slab GF
69.99
-
8977.74
... More
1st floor
4.08
-
9882.4
... More
Cutting, straightening coiled or bent up M.S. Rod or tor steel using SAIL/RINL/TATA/JINDAL STEEL/ SHYAM STEEL including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge Ground floor
485.11
-
5816.92
... More
1st floor
15.19
-
5839.4
... More
Fly Ash Bricks masonry (25cmx12cmx8cm) having crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before use in Superstructure and for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc. complete along with testing of strength as per relevant I.S.standard andas per specification & direction of Engineer-in-charge. Ground floor
133.13
-
4141.12
... More
1st floor
14.31
-
4360.24
... More
Providing 2.5cm thick grading concrete of prop.(1:2:2) using 6mm size H.G. chips of approved quality & from approved quarry including watering, curing with cost, conveyances, taxes of all materials, cost of all labour, T&P required for the work etc. complete as per direction of Engineer-in-charge
466.59
-
282.44
... More
1st floor
32.62
-
303.97
... More
Providing 12mm thick cement plaster in cement mortar (1:4) in all floors finished smooth to outside surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge
83.57
-
150.91
... More
Cement concrete (1:2:4) in foundation and plinth using 12cmsize hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete watering, curing etc, complete to required levels laid in layers to required thickness including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge
57.23
-
5860.89
... More
Providing 12mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to outside surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge(Ground floor)
436.73
-
131.39
... More
1st floor
82.74
-
135.94
... More
Providing 16mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to outside surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge
1044.26
-
187.32
... More
1st floor
64.47
-
191.37
... More
Providing 6mm thick cement plaster in cement mortar (1:4) over RCC surface with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge
555.58
-
140.86
... More
1st floor
25.71
-
143.36
... More
Dressed seasoned sal wood work framed and fixed (wrought and put up) in trusses, purlines, frames of doors, windows, ventilators and beams including cost of materials, labour, T&P etc as per specification and direction of Engineer in charge
1.23
-
47363.73
... More
Supplying fitting fixing of 32mm thick peasal wood fully glazed panneled shutter moulded panels with all cost of materials, labour, iron fittings and wooden hinged cleats etc fitted and fixed complete in all respect etc, complete as per specification and direction of Engineer-in-charge
35.02
-
3783.45
... More
Supplying, fitting & fixing in all floors of M.S.grills and gates, with top rails, steel windows, critical frames for windows balustrades of stair case and parapet railing made out of M.S.square bar/flat as per approved drawing and design including making holes in walls and RCC structure, wood work etc and making good to the damages to walls with cement concrete(1:2:4) with hard crusher broken granite stone chips of 12mm to 20mm size(20mm size not to exceed 25%) of approved quality with cost of all materials labour, cost of welding all T&P, sundreis etc complete in all respect as per specification and direction of Engineer in charge(screws and other hardward required materials to be used in the work shall be of approved quality and specification and shall have to be supplied by the contractor at his own cost
877.61
-
63.12
... More
Labour for fitting and fixing of M.S.Grill with cost of all materials and labour etc. complete as per specification and direction of Engineer in charge
32.16
-
67.4
... More
Supplying fitting and fixing up window (Sliding type) made up Alluminium Sectons 9778 as window frame, section No.4095, 4096 and 9777, 3994 as shutter frame with rubber beading including locking arrangements including all fittings and cost of all materials, labour etc. complete as per specification and direction of Engineer in charge.
10.39
-
585.36
... More
Providing, Fitting & Fixing of Stainless steel of 304 grade in handrailing of 50mm dia of 2mm thick circular pipe with balustrade of size 32mmX32mm X2mm @ 0.90mtr. C/C and stainless square pipes bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance of Materials, Labour, TandP etc required for the complete in all respect and as per specification & direction of Engineer-in-charge
303.08
-
332.93
... More
Painting two coats with a coat of approved synthetic enamel paint over a coat of primer to wood work including sand papering, polishing the surface, cost, conveyances of materials and cost of all labour TandP etc complete as per specification and direction of Engineer in charge
120.23
-
188.03
... More
1st floor
6.37
-
192.14
... More
Providing fitting and fixing of Vetrified tiles in floors of approved make over 20mm thick bed of cement mortar(1:4) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge GF
462.48
-
929.9
... More
Providing fitting and fixing of Vetrified tiles in dadoos and skirting of approved make over 12mm thick bed of cement mortar(1:3) jointed with neat cement slurry mixed with pigment to match the sades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge GF
196.24
-
1037.31
... More
Finishing surface of walls with cement based wall putty(water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges, conveyance, taxes of all materials and cost of all labour with TandP etc complete as per specification and direction of Engineer in charge
1883.93
-
89.35
... More
1st floor
172.92
-
90.46
... More
Painting two coats with anti-fungal resistance Weather Seal Coat of approved shade over a coat of (water bound) wall primer upto any height by means of brush to outside surface of walls after cleaning the surface including watering, curring etc. complete in all floors including cost, conveyance, taxes of all materials, labours sundries T&P required for the work as per specification and direction of Engineer in charge GF
436.73
-
134.78
... More
1st floor
82.74
-
138.99
... More
Painting two coats with a coat of approved plastic emulsion paint over a coat of primer to interior surface of walls of approved quality to give an even shade k including sand papering, polishing the surface, cost, conveyances of materials and cost of all labour TandP etc complete as per specification and direction of Engineer in charge
1599.84
-
136.59
... More
1st floor
90.18
-
137.81
... More
Carriage of surplus earth by mechanical means upto 5km lead including cost of all labour for loading and unloading charges, transportation and spreading in layers at the dumping area etc complete as per specification and direction of Engineer in charge
280.89
-
149.67
... More
Providing fitting and fixing of aluminium false ceiling with Aluminium anodised T Section No.3215 with 2'0" centre to centre, L section No.1705 upto 15 micron on 4 walls to be fixed by means of steel screw and PVC plug and the Aluminium grid 2'0"x2'0" with prelaminated particle board suspended from ceiling including cost, conveyance and taxes of all materials and cost of all labour, TandP etc complete as per specification and direction of Engineer in charge
342.15
-
1338.8
... More
Supplying fitting and fixing of hardware fittings for door and windows etc. complete Brass Butt hinges Heavy Type (100x85x5.5)mm
66
-
155.47
... More
Brass Butt hinges Heavy Type (75x65x4)mm
56
-
65.53
... More
Chromium Plated Brass Handle (125mm with 175x32mm flat
18
-
123.4
... More
Chromium Plated Brass Handle (100mm with 150x25mm flat
30
-
106.38
... More
Brass Tower Bolt (250x10)mm
36
-
167.66
... More
Brass Tower Bolt (100x10)mm
48
-
78.3
... More
M.S. Aldrop (300x16)mm
9
-
77.95
... More
Brass Screw 50mm
120
-
1.49
... More
Brass Screw 30mm
150
-
1.15
... More
E.I. Work :Recessed wiring to light point/ fan point/Call bell point with 1.5sqmm FR PVC Insulated single core multistarand copperConductor of ISI marked with 20mm dia non metalic PVC flexible conduct with 6Amps Modular switch socket & 1.5sqmm FR PVC Single core multistrand copper conductor as earth wire includingall accessories and connection as per direction of Engineer in charge (Make-Legrand / L&T / Havels ) light point Group-A
14
-
538
... More
light point Group-B
18
-
759
... More
light point Group-C
21
-
1034
... More
Fan point Group-B
18
-
759
... More
Fan point Group-C
18
-
1034
... More
Call Bell point Group-C
1
-
1034
... More
Supply and fixing of modular metal box 150x75x60mm deep on surface with laminated cover for fixing 5/6Amps modular switch & socket etc as per direction of Engineer-in-charge.Make-Legrand / L&T / Havels )
16
-
497
... More
Supply and fixing of 5/6Amps Modular socket on existing board.Make-Legrand / L&T / Havels )
6
-
113
... More
Supply and fixing ofmodular metal Box of 180mm x100 X 60 mm nominal size in recess with modular fixing of 5 pin,15/16 Amp modular type switch socket , ISI marked connection painting etc as required complete in all respect as per direction of Engineer in charge(Make- Legrand / L&T / Havels )
5
-
634
... More
Supply &Fixing of 3nos 3pin 5/6Amps modular switch socket,1no of 5pin 15/16Amps socket outlet including connection.
3
-
1490
... More
Recessed wiring to submain in the following insulated single core multistrand copper conductor of ISI marked in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer-in-charge.(Make of wire-Finolex/L&T/Havells)
2x1.5 sqmm +1x1.5 sqmm
185
-
124
... More
2x2.5 sqmm +1x1.5 sqmm
160
-
137
... More
2x4 sq mm+1x1.5 sqmm
338
-
155
... More
4x6 sq mm+2x2.5 sqmm(for 4way TPN MCB Box)
26
-
284
... More
4x10 sq mm+2x4 sqmm(for 6way TPN MCB Box.AC Control)
48
-
411
... More
Supply and fixing of remote call bell.Make-Anchor/Cona
1
-
241
... More
Supply and fixing of Bakelite Angle holder/Batten Holder of ISI marked in place of ceiling Rose complete in all respect as per direction of Engineer in charge (Make : Cona / Anchore)
4
-
57
... More
S/F of 1x1.5sqmm pvc wire for Inverter wiring.
265
-
45
... More
Supply and fixing G.I. Standard Earthing as per Govt specification.
1
-
2423
... More
Supply and fixing Earthing with copper earth plate 600 mm X 600 mm X 6 mm thick ISI marked including accessories as required.
1
-
11759
... More
Providing and fixing 8 SWG (4 mm) dia copper wire on surfae or in recess for loop earthing along with existing surface / recessed conduit / submain wiring /cable as required.
42
-
92
... More
Supply and fixing of following MCB distribution board 250V on recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) Make-siemens/ Legrand/schnider 4way TPN Double door
1
-
2151
... More
6way TPN Double door
2
-
2494
... More
Supply and fixing of following MCB "C" series suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc (Make- siemens/ Legrand/schnider )
6/10Amps single pole MCB.
48
-
129
... More
32Amps double pole MCB.
9
-
330
... More
63Amps double pole MCB.
3
-
321
... More
Supplying and fixing of Energy efficient surface mounted LED luminaire with white powder coated ,pressure die-cast Al housing ,with high transmititivity,non-yellowing PMMA diffuser, with wattage not more than 18 watt and lumen output not less than 80 lumens/watt,CRI not less than 80,CCT of 5700-6500 degree K,THD less than 10%, with electronic driver and all other accessories suitable for operation on 230 V, 50 Hz supply as required as per direction of Engg.-in-Charge. ( Make : WIPRO Model No:LD80-171-XXX-60-SM similar make of /Trilux/Osram/PHILIPS)
12
-
1999
... More
SITC of Energy efficient 1x30watt LED Tube light fitting with complete with as per direction of Engineer-in-charge.Make- Philips/Bajaj
12
-
782
... More
Supplying and fixing of Energy efficient Recess mounted LED luminaire made up of Die cast Alluminium / CRCA steel of 600 X 600 mm size with of watt not more than 36W and system lumens output not less than 3100 lumens/watt, with Highly efficient PMMA diffusers for better light transmission and pure effect,with High luminous flux LEDs for better light output,CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%, complete with electronic driver and all other accessories suitable for operation on 230 V, 50 Hz supply .as required as per direction of Engg.-in-Charge (Make: WIPRO model no: CRCO10R038HP57GL or similar of /PHILIPS/Bajaj make)
25
-
3416
... More
Supply and fixing of 15watt LED IP-65 Bulk head luminaries with opal difuser ISI marked complete with all respect as per direction of Engineer in-charge at the staircase top entrance.Make- Bajaj/Philips/Crompton
2
-
1999
... More
Supply and fixing of 12watt LED Lamp with complete.Make-Philips/Crompton/Bajaj
4
-
161
... More
S/Fof 1200mm sweep white/milky colour ceiling fan ISI Marked with fan regulator including connection complete in all respect as per direction of Engineer in charge (Havells velocity/Crompton jura/Orient PSPO)
36
-
2194
... More
Supply and fixing of 12 inch Heavy duty (Metalic Colour) Exahust Fan with wall cutting, S/F of proper size of hume pipe, concreating, plastaring, painting with all connection testing and commissioning complete in all respect as per direction of Engineer in charge(Make Almonar/Khaitan,V-guard)
2
-
2348
... More
Supply and fixing of 16" dia Wall mounted fan with complete.Make-Havells/Usha
6
-
2476
... More
Supply and fixing of heavy duty type Extra fan down rod 24x3cm
36
-
120
... More
Supply and fixing of fan hock
11
-
150
... More
Supply & Installation of A.C. starter modular type,L&T/Siemens make with overload relay 9-14Amps fited with suitable box as per direction of Engineer-in-charge.
9
-
610
... More
Supply and fixing of 63Amps RCCB cum busbar with a suitable enclosure.copper bus bar with a suitable enclosure.Make-Havells/L&T(For light control)
1
-
14748
... More
S/F of 200Amp 3phase AC control distribution panel board powder coated painting size (1.2MX1MX.3M)with provision (i)200Amp 25kA 4pole MCCB-1No. (ii) 160Amp copper busbar (iii) 0-500Amp digital volt & Ampere meterAmmeter with indicator lamp and fuse-3Nos (v) 63Amp four pole MCB-4Nos & 32Amps DP MCB-02No (vi) Floor rubber mat size(3MX2MX3mm thick) including Tranportation to work site complete with all connection as per direction of Engineer in-charge (Simenes/Legrand/Schnider)
1
-
57707
... More
PH Works:-Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge.25mm dia PVC ASTM pipe (sch-80) In ground floor
35
-
145.7
... More
32mm dia PVC ASTM pipe (sch-80) in Ground floor
75
-
189.8
... More
50mm dia PVC ASTM pipe (sch-80) in 2nd floor in the roof of F.F.
20
-
308.5
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes conforming to IS:15778 having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00. spacing. This includes Jointing of pipes & fittings with one step CPVC solvent cement and testing of Joints all complete as per specification and direction of the Engineer in charge.20mm dia CPVC pipe In ground floor
20
-
221.8
... More
25mm dia CPVC pipe in Ground floor
25
-
299.7
... More
Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. 250mm thick wall
4
-
44.2
... More
Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing GI pipes / PVC pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of the Engineer in charge.In ground floor
3
-
148.6
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge.In ground floor
45
-
169
... More
Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge. 15mm dia CP bib cock Jaquar con.037KN make
1
-
836.7
... More
15mm dia CP two way bib cock (JaquarCon.041KN make )
1
-
984.3
... More
15mm dia CP Health Faucet (ALD 573 )
1
-
1328.8
... More
15 mm dia CP long body Bib cock (Jaquar Con .107KN Make)
2
-
1132
... More
15mm dia CP angle stop cock(Jaquar Con.053KN Make)
5
-
713.6
... More
20mm dia C.P. concealed Stop Cock (Jaquar make )Con-CHR-069KN
3
-
1033.5
... More
25mm dia CPVC fullway Valve fullway valve(Ashirvad Make)
4
-
286.2
... More
50 mm dia C.PVC fullway valve(Ashirvad Make)
1
-
901
... More
15mm dia CP flange
4
-
40.3
... More
15mm dia CP extension piece
4
-
59.3
... More
Supplying all materials, labour, T&P and fitting and fixing CP shower with 15mm or 20mm inlet with CP shower arm including polishing all complete as per specification and direction of the Engineer in charge 15mm dia CP revolving shower (Jaquar Make - OHS-CHR-1989)
2
-
1378.1
... More
Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge 10 litres capacity pvc low level cistern with 32mm dia CP long flush bend Slimline white
2
-
1398.9
... More
Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge On the roof of Ground floor 2000litre capacity water storage tanks
2
-
32211.1
... More
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge 1H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.M.P with outlet dia of 32mm
1
-
13775
... More
DOL Control panel
1
-
3805
... More
40mm dia steel short piece
2
-
152.3
... More
Well cap
1
-
152.3
... More
50mm size CI bracket
2
-
91.3
... More
2.50sqmm flat cable
45
-
128.1
... More
20mm dia rigid UPVC pipes
30
-
6.9
... More
Steel rope with cover
35
-
26.7
... More
Labour charges for lowering including transportation
1
-
1500
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge In ground floor. 110mm dia U-PVC SWR pipe(Ashirbad / Supreeme )
45
-
313.4
... More
110mm U-PVC door tee
2
-
137.2
... More
110mm U-PVC door bend
2
-
131.7
... More
110mm U-PVC plain bend
3
-
72.3
... More
110mm U-PVC Plain tee
2
-
115.2
... More
110mm dia U-PVC 'P' trap
6
-
225
... More
110mm dia U-PVC Plain Shoe Bend
2
-
186.5
... More
110mm dia U-PVC offset with out ear
2
-
115.2
... More
110mm dia U-PVC cowl
2
-
38.4
... More
125mm dia CP grating
6
-
81.3
... More
Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge 250mm to 375mm thick wall
6
-
184.8
... More
Supplying all materials, labour, T&P and cutting of R.C.C roof or cornice for taking H.C.I pipes and making good the damages etc all complete as per P.H.Specification and direction of the Engineer in charge.
2
-
150.4
... More
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge 580mm size Orissa pan (Parryware / Hindware / Cera make )
1
-
2267.1
... More
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge. European water closet with ‘S’ trap plain (Parryware / Hindware / Cera make)
1
-
2601.9
... More
Supplying all materials, labour, T&P and fixing bowl pattern urinal of the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge.(a)Half stall urinal (Hindware Make - 60002)
1
-
4803.5
... More
15mm dia urinal spreader
1
-
286.6
... More
32mm dia C.P. dome waste
1
-
128.5
... More
Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge Squatting urinal of size 600mmx350 mm (Parryware/ Neycer/ Hindware )
1
-
2777.4
... More
Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge. 550mmx400mm size wash hand basin with porcelain pedestal (Hindware Make - 91049 + 91115)
2
-
8809.7
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted minimum 5mm thickon 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge . Design Mirror (Parryware Make)
2
-
1541.6
... More
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge Acrylic glass shelf with CP guard rails (Jaquar Make - ACN-CHR-1171N)
2
-
1033.5
... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 25mmx600mm long CP towel rail (Jaquar Make - ACN-CHR-1111SM)
2
-
1156.6
... More
C.P. Ring Towel Rail (Jaquar Make - ACN-CHR-1121BN)
2
-
812.1
... More
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge CP soap holder (Jaquar Make - ACN-CHR-1131N)
2
-
566
... More
Supplying all materials labour T&P and filling in foundation and plinth with sandwell watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of Engineer in charge In ground floor
5.07
-
272.6
... More
Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
1.13
-
4372.3
... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In Ground floor
0.57
-
6250.1
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In Ground floor
39.91
-
149.9
... More
Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. 30 cm. x 30 cm. Kajaria / Somany / Johnson to be pree approved .In ground floor
11.7
-
928.5
... More
Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge.45cm. x 30cm. Kajaria / Somany / Johnson to be pree approved .In ground floor
39.91
-
886.7
... More
Supplying all materials, labour,T&P and fixing 30mm thick solid pvc door shutter consisting of frame made out of MS tube of 19 gauge thickness and size of 19mm x 19mm for stile & 15mm x 15mm for top and bolt rails set with PVC door frame (Choukaths ) of size 50mm x 47mm is made out of 5 cm thick sheet properly joined with solvent cement adhesive as per section view with MS square tube of 19mm of 19mm gauge to be inserted inside to give extra structural strength the price is inclusive of all cost of all materials labour, T&P etc. Complete in all respect as per direction of the Engineer - In- Charge.Solid PVC Door .
3.78
-
3279.3
... More
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 120 PSS UV of size 750x570x1350mm height with water storage capacity 120 liters along with 3 nos of faucets 2for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge.
(a)Aquagurd Pure Chill 120 PSS UV
2
-
95282
... More
EXTERNAL P.H. WORK Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. 110mm dia U-PVC Alround Concrete
25
-
1042.1
... More
160mm dia U-PVC Alround Concrete
35
-
1692.8
... More
Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, KB brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge.Inside size 250mmx250mm
2
-
1375.1
... More
Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:1.5:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 760mmx760mmx460mm
5
-
7922.3
... More
---- do --- addl depth of 0.15m upto 0.90m
5
-
1022.6
... More
Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Inside size 910mmx910mmx910mm
2
-
15414.9
... More
Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and fly ash brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge 1.20m dia x 2.00m deep soakway pit
2
-
15081.2
... More
Construction of 50 users RCC septic tank
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.
20.88
-
193.2
... More
Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.
12.53
-
207.4
... More
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
2.09
-
4809.1
... More
Supplying all materials, labour, T&P and providing shoring and shuttering for foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per specification and direction of the Engineer in charge
54.12
-
225.3
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge R.C.C floor and roof slabs up to 4.30m height
12.1
-
416.4
... More
RCC beam,Column, girders and bressmer etc
68.16
-
707
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
21.05
-
5313.6
... More
Supplying all materials, labour,T&P and providing cement concrete(1:1 ½:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.In ground floor
13.22
-
7062.4
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor (inside/outside)
46.48
-
163.1
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor (inside/outside)
39.68
-
32.1
... More
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
6
-
193.5
... More
Supplying all materials, labour, T&P and providing brick work with fly ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In foundation and plinth
1.7
-
4654.5
... More
Supplying all materials, labour,T&P and providing Vent base in cement concrete(1:2:4) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
2
-
180.8
... More
Supplying all materials, labour, T&P and fitting and fixing UPVC SWR soil waste ventilating pipes and fittings to walls with nails, bobbins and wooden plugs or laying in trenches including earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge.110mm diameter U-PVC SWR pipe
1.8
-
313.4
... More
110mm dia U-PVC Plain shoe bend
1
-
186.5
... More
110mm dia U-PVC Cowl
1
-
38.4
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
5.69
-
107.3
... More
Sinking of 150mm dia tubewell through hand boring (water jet ) method
Supplying all materials, labour, T&P and setting up boring equipments including erection of suitable staging for installation of the required size of tube well, dismantling and removing the same after complection of the work, including transportation of the boring equipments, cleaning and levelling the site, excavation of mud pit, channels etc, levelling of site all complete as per direction of Engineer in charge
1
-
11761.3
... More
Supplying all labour, T&P and transporting the boring pipes, top casing , grouting pipes, P.V.C pipes and fittings, P.V.C well screens, cement, bentonite and gravels etc to the worksite including loading and unloading etc all complete as per direction of Engineer in charge
1
-
1320.6
... More
Supplying all labour, T&P and drilling pilot bore not less than 102mm dia, without casing pipes in all kinds of soils and rocks for the following depths excluding supply of necessary boring pipes including supply of necessary cutting equipments, extra sockets (whenever required) etc and withdrawing the boring pipes, washing and keeping the bore clear for logging if required all complete as per direction of Engineer in charge. Drilling pilot bore from 0 to 360 metres
95
-
943.6
... More
Supplying all labour, T&P and reaming the pilot bore to the following sizes and depths without casing pipes including withdrawing the boring pipes, washing the bore by means of pipe cylinder etc all complete as per direction of Engineer in charge Reaming 100mm to 150mm dia from 0 to 360 metres
95
-
162.8
... More
Reaming 150mm to 200mm dia from 0 to 360 metres
95
-
193.2
... More
Supplying all labour, T&P and jointing materials and lowering the 300mm dia top casing pipes into the position and removing the same after use all complete as per direction of Engineer in charge from 0 to 360 metres
1
-
1515.8
... More
Supplying all labour T&P and grouting with cement slurry for saline sealing in the bore around the 150 mm dia PVC casing pipe etc all complete as per the direction of the Engineer in charge.
1
-
5110.6
... More
Supplying all labour, T&P and jointing materials and lowering the pvc casing pipes, fittings and well screens in position, including fitting and fixing of centraliser, cutter plug and washing the bore all complete as per direction of Engineer in charge 150mm dia PVC casing pipe from 0 to 360 metres
95
-
117.5
... More
Cost of 150mm dia PVC ASTM pipe (sch-80)
80
-
1075.5
... More
Cost of 150mm dia PVC well screen
15
-
250
... More
Cost of150 mm dia C.I. cutter plug
1
-
350
... More
Cost of bentonite powder
5
-
291
... More
Supplying all materials, labour, T&P and packing the bore with washed gravel of river shingles of required size and specification around the well screen and pipe etc all complete as per the direction of the Engineer in charge
2.5
-
1628.4
... More
Cost and Conveyance of Gravel
2.5
-
457.5
... More
Supplying all materials, labour, T&P and packing the bore with river sand over the gravel pack etc all complete as per the direction of the Engineer in charge
2.5
-
240.4
... More
Cost and Conveyance of sand
2.5
-
184.7
... More
Supplying all labour T&P and grouting with cement slurry for sanitary sealingin the bore around the upper most 3 metres of 150mm dia PVC casing pipe etc all complete as per the direction of the Engineer in charge.
1
-
1235.8
... More
Cost of Cement
2
-
646
... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge By Compressor
1
-
2036.6
... More
Construction of Production well Protection Chamber Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.
0.66
-
193.2
... More
Supplying all materials labour T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of Engineer in charge
0.51
-
272.6
... More
Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
0.26
-
4372.3
... More
Supplying all materials, labour, T&P and providing brick work with Fly Ash .bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
1.04
-
4654.5
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
8.28
-
149.9
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge R.C.C floor and roof slabs
0.81
-
416.4
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
0.2
-
5313.6
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
0.2
-
7062.4
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements