Works Department Tender

Plain cement concrete M-20 (1:1.5:3) using 20mm and down graded hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge

Earth work in excavation of foundation trenches in Hard soil soil including shoring, centring, shuttering, propping bullahs, piling and dewatering(if required) with dressing and levelling the bed and laying the excavated earth in layers not exceeding 0.3 m in depth at places away from work site and stacking of useful materials near by the work site with in intial leads and lifts including cost of all labour and T&P for the works etc. complete as directed by the Engineer-in-charge.

Supplying & filling in foundation & plinth with sand in 23.5cm(9”) thick layers including watering & ramming with cost, conveyance, royalties, taxes of the materials & labour with T&P required for the work etc.,complete as per direction of Engineer-in-Charge. (Measurement will be taken on finished compacted section only)

R.C.C.work of Grade M-20 having minimum compressive strength in work test of 200kg/Cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 & IS 516 using 20mm down graded size black crusher broken hard granite stone chips of approved quality & from approved quarry including hoisting, lowering & laying concrete & compacting by using vibrators, watering & curing for 4 (four) weeks centring, shuttering & finishing the exposed surface smooth providing grooves or beads where necessary including cost & conveyance royalties & taxes of all materials T&P & labour required for the work etc., complete in all respect but excluding cost & conveyance of M.S.Rods, HYSD bars or tor steel and binding wires of 18 to 20 gauge & labour charges for straightening, cutting, bending etc.,of the M.S.Rods or tor steel & binding wires & laying the grills in proper position as per direction of Engineer-in-Charge. a) Drain Bed

b) Drain wall

c) Drain Slab

Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / TATA / RINL / JINDAL STEEL(Panther) / SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.

Providing weep holes in abutment, wing wall, retaining wall, toe wall and RCC drain etc with 100mm dia A.C. pipe as per approved drawing and technical specifications complete in all respect as per Section 2200 & Clause 2706 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge

Carriage of excavated earth by mechanical means and disposing the same away from the work site within 5 Km lead as directed by Engineer-in-charge including loading and unloading etc. complete in all respect.