Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 9,12,300Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_EICCL_107854_1Tender No
CCENC (R AND B) /12/ 2024-25Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Roof beam
25
20563
514082.5
... More
Straightening bent up or coiled M.S. rod or HYSD steel (Fe-415 / Fe-500), cutting, bending, cranking, hooking, welding or jointing (if required), the M.S. rod or HYSD steel and binding, tying the grills, hoisting, lowering and placing in proper position as per drawing & design required for R.C.C. works including cost, conveyance and taxes of M.S. rod or HYSD steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc. complete as per approved drawing and technical specification and as per clause-1600 of MoSRTH specification for road & bridge works (Latest Revision ) complete in all respect as directed by Engineer-in-Charge.(weight of binding wires will not be considered for payment and payment will be made on weight of M.S. rod or HYSD steel only. Steel bars of only MAJOR INTEGRATED STEEL PLANTS like SAIL, RINL, TATA, JINDAL & SHYAM STEEL, etc. of Fe-415 / Fe-500 grade are to be used in the work & if required original bill of . steel has to be produced by the contractor)
-
-
-
... More
SECOND FLOOR
46.13
8725
402516.54
... More
Providing Brick work with Fly ash Bricks 23cm x 11cm x 8cm size having crushing strength not less than 75 kg/cm² with dimensional tolerance +/- 2 percent in cement mortar (1 cement : 6 sand), with all necessary projections, splays cutting, circular moulding, corbelling, chamfering, watering and curing etc. including cost, conveyance, stacking, loading, unloading, royalities of all materials, cost of all labour, scaffolding, sundries and T&P required for the works complete in all respect excluding GST as directed by the Engineer-in-charge.
-
-
-
... More
GROUND FLOOR
78.75
5776
454899.38
... More
FIRST FLOOR
47.35
6147
291074.66
... More
Providing 16 mm thick cement plaster in cement mortar of mix (1:6) in all floors at all height using screened & washed sharp river sand for mortar with approved quality of cement, finished smooth to the even surface of the brick masonry walls after racking out the joints properly including cost, conveyance, loading, unloading, stacking, royalities of all materials, cost of all labour, T&P, sundries, scaffolding, watering, curing, rounding of corners etc. required for the work complete etc. excluding GST as directed by the Engineer-in-charge. (inside wall)
-
-
-
... More
GROUND FLOOR
155.92
281
43875.89
... More
FIRST FLOOR
162.57
288
46868.93
... More
Providing 6 mm thick cement plaster in cement mortar of mix (1:4) in all floors at all height using screened & wahed sharp river sand for mortar with approved quality of cement to the ceiling of the Roof Slab, Staircase, Beams, Columns, Landings, Railings, Chajja, Fins, Walls, Jally and Shelves etc. including roughening, scraping, chiseling, cleaning, closed deep chipping with slurry treatment and finished smooth to all RCC surface including cost, conveyance, loading, unloading, royalities, stacking of all materials, cost of all labour, sundries, T&P, scaffolding, watering, curing etc. complete in all respect excluding GST as directed by the Engineer-in-charge.
-
-
-
... More
GROUND FLOOR
2.68
213
572.72
... More
FIRST FLOOR
322.68
219
70699.19
... More
Supplying, fitting and fixing full body vitrified tile (Matt) flooring using vitrified tiles having thickness of 8mm to 10mm conforming to IS 13755 of different sizes of approved quality of Somany/Kajaria/RAK, colour in floors, treads on steps and ladings on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and fixing with neat white cement slurry, grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shades of the vitrified tile if required, watering and curing for 21 days, including cost, coneyance, loading, unloading, royalities of all materials, cost of all labour, labour cess, sundries, T&P required for the work, complete in all respect as per specification excluding GST and direction of Engineer-in-charge. (Note- Sample of tiles shall be approved before procurement and use, Rate of tile not less than Rs. 890/sqm inclusive of GST)
-
-
-
... More
GROUND FLOOR
162.15
1182
191661.3
... More
Supplying, fitting and fixing full body vitrified tile (Matt) dado using vitrified tiles having thickness of 8mm to 10mm conforming to IS 13755 of different sizes of approved quality of Somany/Kajaria/RAK, colour in floors, treads on steps and ladings on 20mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and fixing with neat white cement slurry, grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shades of the vitrified tile if required, watering and curing for 21 days, including cost, coneyance, loading, unloading, royalities of all materials, cost of all labour, labour cess, sundries, T&P required for the work, complete in all respect as per specification excluding GST and direction of Engineer-in-charge. (Note- Sample of tiles shall be approved before procurement and use, Rate of tile not less than Rs. 900/sqm inclusive of GST)
-
-
-
... More
GROUND FLOOR
180
1322
237978
... More
Providing leather /lapato finish Granite stone prepolished 20mm thick of area above 0.40 Sqm in flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days,including machine polishing to edge moulding to give high gloss finish including making three nos of groove over tread etc. complete including cost, coveyance, loading and unloading and ,es of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
456.18
2816
1284648.5
... More
Providing lather/Lapato Granite stone prepolished 10mm thick in dado of approved quality, colour and size in dado, riser of steps and dado of landings in all floors at all height on 12mm thick bed of cement mortar of mix (1:3) with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days,including machine polishing to edge moulding to give high gloss finish including making three nos of groove over tread etc. complete including cost, coveyance, loading and unloading and ,es of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.
-
-
-
... More
GROUND FLOOR
73.22
2060
150899.1
... More
Finishing wall surface of walls with wall putty (water based) of approved make and finishing the surface smooth by sand papering to receive paint in all floor & at all heights including cost, conveyance, loading, unloading, stacking of all materials, cost of all labour, sundries, staging, scaffolding, T&P required fo the work etc. complete in all respect excluding GST as directed by the Engineer-in-charge.
-
-
-
... More
GROUND FLOOR
158.6
85
13576.16
... More
FIRST FLOOR
485.25
87
42459.38
... More
Providing Wall painting with Plastic emulsion paint two and more coats in all floor and at all heights including cost, conveyance, loading, unloading, stacking of all materials, cost of all labour, sundries, staging, scaffolding, T&P required for the work etc. complete in all respect excluding GST as directed by the Engineer-in-charge.
-
-
-
... More
GROUND FLOOR
158.6
106
16890.9
... More
FIRST FLOOR
485.25
108
52698.15
... More
Providing wall painting with primer (Water bound) one coat to the internal wall surface including cost of all materials, labour, tools & plant, brushes etc. complete in all respects excluding GST as per the direction of Engineer in charge.
-
-
-
... More
GROUND FLOOR
158.6
81
12894.18
... More
FIRST FLOOR
485.25
83
40421.33
... More
Painting to external surface of building with textured exterior Weather seal coat paint approved shade and quality of approved design over one coat of Primer cost of waterproofing exterior primer paint applied after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance, of all material cost of all labour, brushes, T&P etc and necessary scaffolding work complete excluding GST as directed by the Engineer-in-charge.
-
-
-
... More
GROUND FLOOR
378.72
178
67601.52
... More
FIRST FLOOR
378.72
183
69646.61
... More
Supply, providing, installing and fixing factory finished custom designed Tubular STRUCTURE WITH super structure comprising of steel column truss , purlins etc manufactured out of minimum 0.75 mm thick steel sheet as per design requirements. (Make- IS 2062) make in position with necessary accessories with scafolding complete in all respect as directed by the Engineer-in-charge
24190
115
2781850
... More
Supply, providing, installing and fixing 50mm Thick Roof Puf Sheet Top Sheet: 0.50mm TCT 36 Kg/CuM Density White Colour sheet with 300 Mpa tensile strength. Bottom Sheet: 0.45mm TCT PPGI RMP (Make: Kingspan Jindal)in position with necessary accessories with scafolding complete in all respect as directed by the Engineer-in-charge
800
2200
1760000
... More
Supply, providing, installing and fixing 300mm length 20mm dia , Epoxy Anchor bolt with Fischer chemical - FIS V Plus 360 S with necessary accessories with scafolding complete in all respect as directed by the Engineer-in-charge
128
1480
189440
... More
Supply, providing, installing and fixing in 0.50 mm thick rain gutter with 150mm PVC down take pipe with necessary accessories with scafolding complete in all respect as directed by the Engineer-in-charge
300
750
225000
... More
Supply, providing, installing and fixing 0.50mm thick PPGI center ridge with corner flashing with necessary accessories with scafolding complete in all respect as directed by the Engineer-in-charge
100
450
45000
... More
Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuser and removing the debris within 50m lead
-
-
-
... More
GROUND FLOOR
160
141
22576
... More
FIRST FLOOR
160
148
23712
... More
SECOND FLOOR
160
155
24896
... More
Dismantling brick or stone masonary in lime or cement moratar under 3m.height including stacking the useful material same for reuse and removing the debris within 50m lead
-
-
-
... More
GROUND FLOOR
4.5
1576
7096.05
... More
FIRST FLOOR
7.5
1655
12417.75
... More
SECOND FLOOR
9.38
1738
16307.13
... More
Supplying & fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make ,design,colour and size made by block making machine with propoer compaction laid in required pattern etc.complete in all respect conforming to IRC sp-60:2018
3326.18
608
2023647.91
... More
Providing of GFRC JALI (Glass Fiber Reinforced Concrete), Make “SAMUDYAM”, of thickness 25 mm ± 5 mm and border thickness of 40 where fixing to be done Pattern, design, and colour of approved make to be fixed on/between RCC /Block work Column or structural work with Dry Fixing method with appropriate MS Structural & Cleats frame work, using fasteners, and necessary hardware be made from '53 grade' Portland Cement make Birla/ 'JK Cement' or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass fibre make 'Owens Corning' or equivalent, Super plasticizers / Additives make by 'BASF' or equivalent, Polymers make 'BASF' or equivalent and U.V resistant Synthetic inorganic pigments shall be used for pigmentation make 'BAYFERROX (Germany)' or equivalent. The material casting shall take place in Synthetic Rubber / FRP Mould manufactured by Mould / Tool / Mou Resin of Revex/ 'Reckli' or equivalent. make in position with necessary accessories with scafolding complete in all respect excluding GST as directed by the Engineer-in-charge.
200
5050
1010000
... More
Interior work
Providing & fixing of Luxalon U Baffle Linear aluminum panel false ceiling system as manufactured by Hunter Douglas India Pvt. Ltd. (Shade – Wood Finish). The system shall consist of Box shaped Panel 30mm wide X 100mm deep X 0.6mm thick in standard length of 1 meter – 4 meters. The Panels shall be coil coated on a continuous paint line, double baked & formed from stove enameled corrosion resistant aluminum alloy for higher strength & good roll forming characteristics. Panels shall be clipped to an enameled & roll formed Fe panel carrier of 62mm wide X 39mm deep X 0.5mm thick in standard length of 5 meters. The panel carrier shall be double baked & roll formed from enameled corrosion resistant aluminum alloy in Black color with cut outs to hold the panels in modules of 150mm to provide a 100mm gap between 2 panels respectively. The first carriers shall be fixed at a distance of 150mm from the Wall & thereafter at 1.3 meters c/c. The carriers shall be suspended from the roof by 6mm diameter G.I. threaded suspension rod. The rod hangers shall be fixed at a distance of 150mm from the edge & thereafter at 1.2 meters c/c. The G.I. suspension rods shall be fixed to the roof using metal fasteners. Wherever required, two panels will be coupled horizontally with panel splice & similarly for carriers, carrier splice shall be used. In case of a floating ceiling design, the panel ends shall be closed using suitable PVC end caps.
-
-
-
... More
Paint Finish: The panels shall be chromatised for maximum bond between metal & paint & enameled twice under high temperature, visible side with full primer & finish coat & inner side with primer coat & skin coat in a continuous paint line.
125
6500
812500
... More
Supply and Installation of Anutone/Armstrong/equivalent 8 mm thick magnesium oxide square edge magnesia core ceiling tile of size 595 x 595 mm having density 1000 Kgs/ m3, weight 8 kg/m2 which is suspended by using 0.3 mm thick and 24 mm wide precoated metalAnutone T 24 grid system. The technical parameters are as follows :Core - Magnesia, Fire – Class 1 & P, Acoustics – STC 44 - 54 , climate - 50 , RH - 95, Termite resistance ,Green (RC %) – 30, Hygiene (VoC, Clean room) – Low, Class 3 , Thermal -0.12 W/mK. The T 24 Grid system of 600 x 600 mm module shall include wall angle (WA 24 W 30) with unequal flanges of size 14 & 20 mm wide, length 3000 mm, 0.43 mm thick fixed along the perimeter of wall with the help of nylon sleeves and suitable fasteners at 300 mm centers. Then suspend the Main T 24(MT 24 W 36) having flange width 24 mm, height 32 mm and length 3600 mm from the soffit with help of soffit cleat and wire rod along with leveling spring clip at 1200 mm c/c. Cross 24(CT 24 W 12) with flange width 24 mm, height 32 mm and length 1200 mm is then interlocked into the precut slots in the Main T 24 at 600 mm centers in the direction perpendicular to the Main Anutone T 24. Finally Cross T 24 (CT 24 W 06) having flange width 24 mm, height 32 mm and length 600 mm are then interlocked into the precut slots in the 1200 mm Cross T 24 at 1200 mm centers and in direction parallel to the Main T 24. Anuton Magnesium oxide vinyl square edge of size 595 x 595 x 8 mm thick shall be placed into the grid size of 600 x 600 mm. Test certificate will be submitted after procurement of materials.
708.75
1680
1190700
... More
Providing and fixing gypsum board suspended false ceiling (single layers) in different levels, recesses, flat areas as per design with G.I. Framework using Gypsteel of perimeter channels, intermediate channels and ceiling sections) and 12.5 mm taped edge gypboard screw fixed to ceiling section as per design , complete with fixing and finishing of tapered and square edges of board with jointing compound paper tape and 2 coats suitable primer including all cost of materials , labour, overheads T & P etc., complete.and painting the entire ceiling area with plastic emulsion paint ( 2 & more coats ) to get an even shade as per the detail design and specification. measurement will be taken flat area of the ceiling for payment.no additional payment made for the different level/ drop.
708.75
997
706978.13
... More
Finishing wall surface of walls with wall putty (water based) of approved make and finishing the surface smooth by sand papering to receive paint in all floor & at all heights including cost, conveyance, loading, unloading, stacking of all materials, cost of all labour, sundries, staging, scaffolding, T&P required fo the work etc. complete in all respect excluding GST as directed by the Engineer-in-charge.
708.75
85
60669
... More
Supply and Installation of Wall Panelling Acoustics Anutone /Uno Panel 12.5 mm thick Gypsum Glass fiber reinforced Acoustics Panel (GFR) Ellipse /Pixel taper with sharp slotted mini perforation 13 % having 4 x14 mm perforation at 10 x20 mm pitch or gypsum boards random circular perforation 10% with variable acoustic 8 / 15 / 20 mm diameter for broad band sound absorption or pixel square perforated of size 3 mm X 3 mm 8 mm center squareAnatone GFR boards with size of boards are 1200 x 2400 / 595x595 mm having density 800 kg/mt cube & weight 9 kg / mt square with fire class A2 - s1 d0 , Climate 0C, RH ( 50,70) , NRC - upto 0.75 to be fixed with Philips head screw to GI frames as per the specification for fixing concealed grid wall paneling system. The concealed wall paneling system shall include GI Wall channel(WC25) having thickness 0.45mm, length 3600mm, unequal flanges of 15 & 20mm and web of 25mm should be fixed along the perimeters of the wall with nylon sleeves and suitable fasteners at every 300mm centers. Then fixed Main channels(MC45) having thickness 0.9mm, length 3600mm, equal flanges of 15mm and web 45mm from the side wall & fixed at every 1200mm centers with GI cross channel(CC25) having thickness 0.45mm, length 3600mm, knurled web 35mm, depth of 25mm and equal flanges 9.5mm is fastened to the Main channel in the direction perpendicular to the Main Channel at every 600mm centers. The framework will maintain 50 / 75 mm gap from the walls. Now cladding the boards on the CC25 with the help of screw to get a flush finish. The jointing & finishing of the same will be done by using jointing compound , paper tape. The Anatone synthetic poly fiber PF 5 x 25 wool of 50 kg density & width 600 mm 5000 gsm to be filled between the horizontal studs as infiller with the help of wire & adhesive.Test certificate of the use products shall be submitted after procurement of materials.
445.75
2394
1067118.94
... More
Providing & fixing of Europratik charcol louvers (design no -E-101,HEIGHT -8ft & width -5inch )& sylvan ply primium club 250(5509-grade).ply to be use on top of this charcol louvers will be get pasted .Europatik Charcoal Louvers system as manufactured by Ganapati Lam & ply pvt ltd./Equivalent of including cost, conveyance, loading, unloading, stacking of all materials, cost of all labour, sundries, staging, scaffolding, T&P required fo the work etc. complete in all respect excluding GST as directed by the Architects / Engineer-in-charge. make alstone
558.98
7495
4189697.76
... More
Providing and fixing of 6.0 mm thick Suede Finish Greenlam Exterior Grade Compact Laminates (CLAD) made up of 1300mm x 3050mm in size and manufactured under EN438-2&3:2005 standard. CLAD should be made with GLE Technology & Double Layer UV Protection process under high pressure, thermosetting Phenolic resign treated Exclusive & Certified Exterior Grade Decorative paper (UV Resistant) on both side with high grade Kraft paper in between. Both the decorative and Kraft paper to be made of Virgin Pulp. CLAD should be resistance to water immersion characteristic with permissible increase in thickness and mass 0.60% and have density 1.35G/cm3, UV resistance on Grey scale measurement will be measured ≥ 4, with flame retardant fulfilled the criteria of under EN13501-1:2007 with classification of BS1D0 standard property, Moisture resistant, Impact resistant, Corroison free, Saltwater resistance, Termite resistant, Scratch resistant, Weather and Climatic Shock Resistant high pressure thermosetting resign treated balanced compact laminates Clad. (The manufacturer should provide 12 years warranty certification on manufacturing and moisture related defects). A Greenlam product with Green Guard Gold certification where the VOC emission level is less than 0.22 PPM. Anti-bacterial and Anti-Fungal property under JIS Z2801:2000. Greenlam CLADS will be installed on Aluminium tubes at 500 mm c/c distance with special L Brackets. There will be special fixing treatment on all the corners sections. Aluminium box size will be 25mmx50mmx1.8 mm. Boards will be fixed on the Aluminium Channels with colour match rivets (Greenlam Rivets) through 8mm drill hole in Boards and 5.0 mm dia drill holes in aluminium Box. Rivets will be installed by automatic Rivet Guns Shade designed of clad should be finalized under direction of Engineer-in-charge.
113.4
7209
817523.28
... More
Providing BWF Approved Canadian maple wood stage flooring system for multipurpose stage Areana). original canadian maple wood sports floor finished with 20mm thick, 57-83 mm wide and in random length in tounge and groove shape. the edges of the boards will have a finger lock groove and the bottom side with air pass groove, klin dried. Resilient SPF Pine Wood sleeper sub floor of 70mmx40mm, at 350mm apart where
-
-
-
... More
1.Kiln dried treated with anti-termite solution and fixed on the bottom side with 19 mm thick EPDM rubber pads,stapled underside of Sleepers through the two wings at 350mm apart Distance. 2.IPS subfloor treated with a vapor barrier to be placed on the levelled IPS sub-floor before laying the under frame. The runners having air cushion pads to be placed on the vapor barrier in perfect level at 9'' apart in 1 direction. The surface board to be screwed to the runner through the tongueonly and will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. 3.The expansion of 12-15 mm will be left open between the wooden flooring and the surrounding tiled area / walls. 4.After installation the floor will be machine sanded in uniform level & finished with Water base PU Anti-Skid Polish and Game line marking to be carried out in required colors Finished with UVCoating On Final Wooden Flooring.
195
7725
1506507.6
... More
12 mm thick clear Toughned glass door-
Providing and fixing 12mm thick clear Toughened glass frameless door with derma permium fittings. Derma Premium (9111198) Unilite package BTS 5, UL PT10 with cover , ULPT20 with cover, UL US 10 Luck with cover and PT 24, Dorma Premium (9137121) H type handle 450mm, 12mm clear toughened glass with cut out and hole , including the cost of all materials, hardware fittings, including the cost of all materials, labour for work, taxes, royalities, loading and unloading, conveyance, sundries and t&P et complete in all floors.
7.2
11000
79200
... More
Supply and installation of tested Vetrotech Saint-Gobain VDSTM fully glazed fire rated fixed non-load bearing double leaf door system with 120 minutes of integrity, radiation control (EW 120) with fire protection.Providing and fixing of tested fully glazed steel fire rated unlatched single acting double leaf door with 120 minutes of radiation control (EW 120) fire protection. The glass should be Contraflam Lite DGU 28 mm clear 120 min fire rated Toughened glass with a light transmission of 77.8%, 15% external reflection, 2.846 KW/sq.m U Value, 0.7081 as the solar factor and a sound reduction of 40 dB and manufactured in TUV audited Facility. The glass should be compliant to class 1(B)1 category of Impact Resistance as per EN 12600.
-
-
-
... More
The frames shall be imported cold rolled steel profiles from Switzerland using DX52D+Z275-M-A-O steel sheets (As per EN standard EN 10327). The frames are cold rolled from 1.5 mm steel sheet to form a profile of 50 mm x 50 mm on all sides. The shutters should be fixed to the frame using Weld-on hinges of dimensions 179mm X 20mm. The profiles shall have groves to incorporate Fire CR gaskets. The glass should be held in its place with the help of 1.5 mm Spring beading and Kerafix 2000 ceramic tape with cross section of 5 x 15 mm as per the test evidence. The glass panes are to be supported on non-combustible Calcium Silicate setting blocks. The maximum glazing size shall be as per the test certification. The profile has to be fixed to the supporting construction by means of M10 or bigger steel bolts at every 150 mm from the edges and every 500 mm (approx.) c/c. The system profiles shall offer C4 level of wind resistance when tested as per EN 12210, Class 4 level of air permeability when tested as per EN 12207, Class 5 Impact Resistance when tested as per EN 13049 and shall have 8A class of water tightness when tested as per EN12208. The system shall be tested as per EN 1364-1 in an international accredited laboratory.make:vertotech(saint globin),shakti hormon
11.52
82000
944640
... More
FURNITURE WORK ( WIPRO/Spacewood Office Solution / Godrej )
The seat frame assembly shall be ERW Tube / IS :3074-2005 GRADE 1: 19 mm dia Round Pipe 1.2mm Thickness . The Seat profile shall be developed to help the users to get necessary comfort in popliteal region and ease of use in forward push for the seat sliding feature.Seat size shall be: 40.5 cm. (W) x 49 cm (D) x 12.5 cm (T)(Front) & 8 cm(T)(Rear). The backrest assembly shall be made of ERW Tube / IS :3074-2005 GRADE 1: 16 mm dia Round Pipe 1.63 mm Thickness & Extra Reinforcement 16 dia round pipe 1.2 mm. The back foam shall be designed with contoured lumbar support for extra comfort at upright and tilted conditions. The back shall be: 47 cm. (W) x 82.3 cm (H) x 11.0 cm (T)(Front) & 6cm (T)(Rear). The Automotive grade HR polyurethane foam for Seat and Back shall be moulded with Density = 55 +/- 5kgs/cu.m. as per JIS K 6401 with compression max 13%. The back & seat covers are made of injection moulded thermoform PPCP as per IS: 10915-1984 with 45.7 cm(W)x 75.5 cm(H)x 2.3mm(T) for back and 43.5 cm(W)x 55.2 cm(D)x 2.3mm(T) for seat. The armrest shall be made up of Polyurathane/wood with waterfall edge design. The armrest shall be available with Polypropelene Cupholder . For Push Back mechanism – Coil Spring / Spring Steel IS : 4454 1981 GRADE 2. The fluimatic slider travels upto 60mm with metal ball and roller cage which results in PUSH BACK OF 140 + 10mm .
-
-
-
... More
Should have flexibility to restrict movement of the pushback and slider as per availability of aisle space. The mechanism houses the seat & back and shall has a special feature of upright resistance lock to avoid activation of sliding feature unless enough force shall be applied by user when tilting shall be required. For Auto Tip-up – Torsion Spring / Spring Steel IS : 4454 1981 GRADE 2 (part i). The chair shall rests on the ground on two Side wing frame with plywood with upholstery. Each Leg is a rectangular tube of cross section 50mm X25mm x1.63mm Thickness as per IS:4923-1985 standards . The side panel frame is made of HRPO sheet metal as per IS :1079 -1994 standards alongwith fabric upholstered plywood. It shall be grouted to the floor using 2 nos. anchors for each panel through the base plate. All steel components shall be zinc passivated and powder coated (DFT 40-60 microns).
-
-
-
... More
The heavy duty 100 % polyester dyed yarn with 3mm + 0.5mm foam backing fabric is available in shades as per Wipro Box Office shade card. FR grade material confirms to IS 15061. The auditorium chair shall be designed to get mounted/grouted on floors with concrete(min 100 mm) or wooden flooring(min 50 mm) with specific grouting bolts. Provision for lights on sides for seats along the aisles using PP housing with 12mm watt lamp. Aluminum cut-outs available for row & seat numbering. Overall Dimensions shall be Seat Height - 45 cm, Height - 104 +/- 1 cm,min armrest c/c - 53.3 cm, Width & Depth as measured from base - Width-66.0 cm and Folded Depth-66.0 cm, Normal depth-76cm, Extended depth- 92 cm. Dimensions tolerance / variations shall be within +/- 1 cm. MAKE:WIPRO//Spacewood Office Solution / Godrej
900
12900
11610000
... More
ELECTRICAL WORK
Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/ Anchor/ Polycab/ HAVELLS/ RR KABLE/KEI with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/ BEC/ Precision/ Norpak/ Anchor/ Kinjal 6A modular type ( flame retradant type) switch ISI marked Make-Schneider(Zencelo)/ legrand( Myrius)/ Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) ( flame retradant type) Make-Schneider(Zencelo)/ legrand( Myrius)/ Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.work will be started only after approval of all electrical,light,hvac,sound design ,make and drawing from S.E, Electrical Circle(R&B) and Chief Engineer, Buildings, Odisha, Bhubaneswar.
-
-
-
... More
Group A
80
611
48880
... More
Group B
90
903
81270
... More
Group C
100
1275
127500
... More
Supply and fixing of ISI marked modular type 2nos 6Amp socket with switch on suitable size of metal box and modular cover in front on surface or recess including all conection as per direction of E.I.C. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. (Make :Legrand(Myrius)/Schnider(Zencelo)//PANASONIC(VISION)
30
937
28110
... More
Supply and fixing of modular metal box on surface or recess with suitable size of modular cover in front including providing an fixing of ISI marked 16Amp modular plug with switch with all conection. on surface or recess including all conection as per direction of E.I.C. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. (Make :Legrand(Myrius)/Schnider(Zencelo)//PANASONIC(VISION)
30
683
20490
... More
Supply& fixing of Modular type 6 Amp one way switch and 6 A socket outlet with metal box and modular cover Separate Board on surface or recess including all conection as per special conditions of contract making good the damages caused complete as per the direction of Engineer-in-charge. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. (Make :Legrand(Myrius)/Schnider(Zencelo)//PANASONIC(VISION))
20
547
10940
... More
Submains:Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.
-
-
-
... More
2 x 1.5 sq.mm. + 1 x 1.5 sq.mm.
300
157
47100
... More
2 x 2.5 sq.mm. + 1 x 1.5 sq.mm.
600
171
102600
... More
2 x 4.0 sq.mm. + 1 x 1.5 sq.mm.
335
188
62980
... More
4 x 6.0 sq.mm. + 2 x 4 sq.mm.
170
317
53890
... More
4 x 10.0 sq.mm. + 2 x 6 sq.mm.
180
444
79920
... More
Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9 as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years.
-
-
-
... More
4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door Warranty on DB is 3 years
8
4270
34160
... More
Supplying and fixing 40 Amps rating, C series,10KA breaking capacity,4P, 415 volts, MCB . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .. The MCB should be Replacement Warranty will be 3 years..
5
2966
14830
... More
Supplying and fixing 40 Amps rating4P, 415 volts, RCCB 30mA . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The MCB should be Replacement Warranty will be 3 years.
5
5239
26195
... More
Supplying and fixing 63 Amps rating, C series,10KA breaking capacity,4P, 415 volts, MCB . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .. The MCB should be Replacement Warranty will be 3 years..
3
2966
8898
... More
Supplying and fixing 63 Amps rating4P, 415 volts, RCCB 30mA . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The MCB should be Replacement Warranty will be 3 years.
3
5239
15717
... More
Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series,10KA breaking capacity, single poles MCB of Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9. the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 3 years.
96
321
30816
... More
Supply ,Installation ,testing and commisioning of suspended Round 50 W LED COB Downlight Dali Dimmable with Recessed mounted Led Luminare pressure die cast Aluminium housing with corrision Resistance powder coated using Nano technology with black powder coated and high transmitive PMMA diffuser having 115 mm Dia, with power consumption Maximum upto 50W having system lumen output of Minimum 5000 Lumen. LED chip life of 50,000 burning hours at L70 - Minimum tested for 10K hours for complaince of TM21 projection. The LED used shall have CCT of 3000K, CRI 80. Luminaire driver should be Isolated and multistage constant current APFC type. Driver should be BIS registered with Input voltage range of 150V to 270V ( nominal rated voltage – 240V) with minimum 6 KV surge protection, PF 0.95, THD 15%; IP 20;. Manufacturer need to submit Following Certificates - 1) LM79 Test report from In-House NABL accredited LAB; 2) LM80 Test certificate from the LED chip manufacturer; 3) Photobiological Safety test report as per IS 16108 : 2012/EN62471 from LED chip manufacturer;.MAKE:WIPRO(Model no.LD56LED GIMBAL DALIDIMMABLE SPOT LIGHT)/Eq. model of BAJAJ/ LT/PHILIPS/PANASONIC/CROMPTON/Havells
47
5042
236974
... More
supply ,Installation and testing of suspended Round 40 W LED ORBIT RING DIMMING with SURFACE mounted Led Luminare pressure die cast Aluminium housing with corrision Resistance powder coated using Nano technology with black powder coated and high transmitive PMMA diffuser having 115 mm Dia, with power consumption Maximum upto 40W having system lumen output of Minimum 4000 Lumen. LED chip life of 50,000 burning hours at L70 - Minimum tested for 10K hours for complaince of TM21 projection. The LED used shall have CCT of 3000K, CRI 80. Luminaire driver should be Isolated and multistage constant current APFC type. Driver should be BIS registered with Input voltage range of 150V to 270V ( nominal rated voltage – 240V) with minimum 6 KV surge protection, PF 0.95, THD 15%; IP 20;. Manufacturer need to submit Following Certificates - 1) LM79 Test report from In-House NABL accredited LAB; 2) LM80 Test certificate from the LED chip manufacturer; 3) Photobiological Safety test report as per IS 16108 : 2012/EN62471 from LED chip manufacturer;.MAKE:WIPRO(Model no.LM23OR-ORBITRING DALIDIMMABLE RING LIGHT)/EQ. model of BAJAJ/ LT/PHILIPS/PANASONIC/CROMPTON/Havells
70
14036
982520
... More
SITC of i-Sense wireless IoT System having BLE 5.2 AES 128 Bit encyption based 32 child DALI controller and analog 2 channel (0-10V) output, operates on 100-277 VAC, 10- 30mA, 50Hz, DALI 2.0 protocol. Sensor input of 0-3V DC & 1mA. For analog dimming, It provides output voltage of 0- 10V DC +/- 0.2V and 15mA per channel. For DALI output, it provides 12-20V DC and 160mA max for 32 DALI devices. An auxillary power output of 3.3VDC and 30mA. 0 - 100% dimming, device to device range 45m. Controller must control individually control standard DALI or Tunable DALI Drivers independantly or combination of both. Operating temperature -20 to 50 deg celsius, surge protection 3kV. System shall support easy commissioning and configuration via Mobile Application along with user and site management features. Optional Cloud Application must be available for control and monitoring of the devices along with analytics reports. Mobile Application shall have features of individual & group control for on/off/dimming/ colour tuneing / Scene Control / Animation etc. Device must have security key for commissioning and replacement for future. MAKE: PANASONIC/PHILIPS/BAJAJ/CROMPTON/WIPRO/HAVELLS/LT
4
22550
90200
... More
SITC of i-Sense BLE 5.2 AES 128 Bit encyption based wireless battery powered 5-button wall switch that controls ON/OFF, intensity and CCT of an individual or group of luminaires.Operates on 3V DC input voltage in an ambient temperature of 0 to 50 deg celsius and device to device range 45m. System shall support easy commissioning and configuration via Mobile Application along with user and site management features. Optional Cloud Application must be available for control and monitoring of the devices along with analytics reports. MAKE: PANASONIC/ PHILIPS/ BAJAJ/ CROMPTON/ WIPRO/HAVELLS/LT
2
5500
11000
... More
supply ,Installation and testing of Wall Up/Down Light on Column 24 W LED with pressure die cast Aluminium housing and high transmitive PMMA diffuser having EXTERIOR WALL GLAZING, with power consumption Maximum upto 24 W having system lumen output of Minimum 3000 Lumen. LED chip life of 50,000 burning hours at L70 - Minimum tested for 10K hours for complaince of TM21 projection. The LED used shall have CCT of 5700K, . Luminaire driver should be Isolated and multistage constant current APFC type. Driver should be BIS registered with Input voltage range of 150V to 270V ( nominal rated voltage – 240V) with minimum 2 KV surge protection, PF 0.95, THD 15%; IP 20;. . Manufacturer should have In-House NABL accredited LAB. Manufacturer need to submit Following Certificates - 1) LM79 Test report from In-House NABL accredited LAB; 2) LM80 Test certificate from the LED chip manufacturer; 3) Photobiological Safety test report as per IS 16108 : 2012/EN62471 from LED chip manufacturer;. MAKE: PANASONIC/ PHILIPS/ BAJAJ/ CROMPTON/ WIPRO/ HAVELLS/ LT
26
2153
55978
... More
supply ,Installation and testing of 3W LED STEP light with pressure die cast Aluminium housing and high transmitive PMMAdiffuser having 600mm Cutout Dia, with power consumption Maximum upto 3 W having system Luminaire driver should be Isolated and multistage constant current APFC type. Driver should be BIS registered with Input voltage range of 150V to 270V ( nominal rated voltage – 240V) with minimum 2 KV surge protection, PF 0.95, THD 10%; IP 20;. Manufacturer should have In-House NABL accredited LAB. Manufacturer need to submit Following Certificates - 1) LM79 Test report from In-House NABL accredited LAB; 2) LM80 Test certificate from the LED chip manufacturer; 3) Photobiological Safety test report as per IS 16108 : 2012/EN62471 from LED chip manufacturer;.MAKE: PANASONIC/ PHILIPS/ BAJAJ/ CROMPTON/ WIPRO/ HAVELLS/ LT
74
1465
108410
... More
Supply ,Installation and testing of Surface mounted indoor type 20 WATT LED Extruded Aluminium lumen o/p not less than 2200 lm LED Batten with Opal Diffuser, IP20, & Functioning as per Product TDS complete assembly With supply of required T&P and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge.MAKE: PANASONIC/PHILIPS/BAJAJ/CROMPTON/WIPRO/HAVELLS/LT
15
728
10920
... More
Supply delivery, installation, testing & commissioning of following types of 12 watt LED based customize logo BOLLARD Department or customer with aluminium pipe housing with CCT:3000K IP66 Height -600 MM mp complete etc.as required and as per the direction of E.I.C. MAKE: PANASONIC/ PHILIPS/ BAJAJ/ CROMPTON/ WIPRO/ HAVELLS/ LT
1
18001
18001
... More
Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm 1700 cmh air delivery with louvers of exhaust fan in the existing wall, including fixing & conntection complete etc.as required and as per the direction of E.I.C..(Make-USHA (Model.Turbo HDEF 1400 RPM ISI)/Eq. model of /Havells/ ALmonrad/ Crompton
10
2687
26870
... More
Supply, delivery, installation and testing of following Sweeps of High Speed Energy Efficient wall FAN 600 MM Air Delivery Wall Fan Motor Speed: 1440 RPM Power Consumption: 180 W Blade Sweep Size: 600 mm Number of Speed Settings: 1 Material: Metal..Dominarie wall Fan complete with Canopies & Capacitor etc. including supply of Sundry Materials, making connection from the suitable point outlet complete as required and as per the Direction of Engineer-In-Charge.(Make-USHA/ Bajaj/ Havells/ ALmonrad/ Crompton)
2
8650
17300
... More
Supply of materials, Fixing of Hot dip galvanised unperforated cable tray with cover and all accessories(Tee,bend etc.) along with hanging arrangements and supports fabrication complete. For following sizes.MAKE:OBO/Profab/Neidax
-
-
-
... More
150x60 mm with 1.6 mm thickness
80
549
43920
... More
300x60 mm with 1.6 mm thickness
90
753
67770
... More
400x60 mm with 1.6 mm thickness
200
850
170000
... More
S/I/T&Commissioning of CPRI tested LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm hot dip galvanised sheet painted by siemens gray powder coat paint is designed as G.A drawing as per direction of Engg.-in-Charge.Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board including component list.60X10MM Separate Aluminium Earth bus bar should be installed.Detailed GA drawing of the Panel, control wiring and power wiring drawing are to be submitted before execution of the work. The logic will be plc based auto and manual mode . plc make : schneider /siemens with minimum 12 di and 12 do .each incomer should have a VMR relay for plc i/o of healthy signal.
In commer-1-01 number of 400A 4P Icu=100%Ics,36Ka LSIG MCCB with micro processor based release(motorized) Electrical locking for normal & DG ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS(FROM Transformer)
In commer-2-01 number of 400A 4P Icu=100%Ics,36Ka LSIG MCCB with micro processor based release(motorized) Electrical locking for normal & DG ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS(FROM 250 KVA DG)
Bus coupler- 01 number of 400A 4P Icu=100%Ics,36Ka LSIG MCCB with micro processor based release(motorized) ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS
Busbar-1&2 04 numbers of 500Amps copper busbar with 1.6A/SQ.MM current carring capacity. busbar duly sleeved by color coated PVC sleeve & supported by suitable size DMC insulator. (for outgoing) Out going- 08 numbers of 100A 4P MCCB,,25Ka MCCB with TMR based release with adjustable overload ,Icu=100%Ics( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS)
Out going- 08 numbers of 125A 4P MCCB,,25Ka MCCB with TMR based release with adjustable overload ,Icu=100%Ics( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS)
Out going- 2 numbers of 160A 4P Icu=100%Ics,,25Ka MCCB withTMR based release with adjustable overload ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS)
Instrument- (i) 06 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 02 set of digital type multifunction meter with CT for voltage,current,frequency,PF,THD indication with RS 485 COMPACTIVITY FOR bms data.
2 no. 3P+N 65kA/POLE type 1+2 SPD with 63A rating,10KA breaking capacity ,4P MCB(Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9)
1
469975
469975
... More
S/I/T&Commissioning of CPRI tested LT HVAC Outdoor double door panel made out by 2mm hot dip galvanised sheet of make: tata/sail/jindal with painted by siemens gray powder coat paint fallowed by 9 tank acid treatment process . Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board including component list.80X10MM Separate Aluminium Earth bus bar should be installed. Detailed GA drawing of the Panel, control wiring and power wiring drawing are to be submitted before execution of the work.
In commer-01 number of 800A 4P Icu=100%Ics,50Ka LSIG MCCB with micro processor based release ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS)
Changeover-01 number of 630A 4P changeover switch ( Make-LEGRAND/ Siemens/ Schneider/HPL/L&T)
Busbar- 04 numbers of 1000Amps copper busbar with 1.6A/SQ.MM current carring capacity. busbar duly sleeved by color coated PVC sleeve & supported by suitable size DMC insulator. (for outgoing)
Out going- 04 numbers of 100A 4P MCCB,,16Ka MCCB with TMR based release with adjustable overload ,Icu=100%Ics( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS) Out going- 01 number of 250A 4P MCCB,,25Ka MCCB with TMR based release with adjustable overload ,Icu=100%Ics( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS) Out going- 2 numbers of 630A 4P Icu=100%Ics,,36Ka MCCB with micro processor based release ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS)
Instrument- (i) 06 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 2 set of digital type multifunction meter with CT for voltage,current,frequency,PF,THD indication with RS 485 compatibility FOR bms data.
1 no. 3P+N 65kA/POLE type 1+2 SPD with 63A rating,10KA breaking capacity ,4P MCB(Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9)
1
400491
400491
... More
S/I/T&Commissioning of CPRI LT indoor/outdoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mmhot dip galvanised panel painted by simens grey powder cote paint is designed as G.A drawing.as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board including component list.. 20X10MM Separate Aluminium Earth bus bar should be installed,with 40ka/pole type 2 3P+N Spd in the incomer with 63A 4p backup protection In commer- 01 no 100A 4P MCCB 16kA with TMR based release with adjustable overload ,Icu=100%Ics( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS)
Busbar- 04 numbers of 200Amps 25*5mm copper bus bar Electrolytic copper busbar duly sleeved by color coded PVC sleeve & supported by suitable size DMC insulator. Out going- 06 nos 63A 4P MCB 10kA,C series Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse. (ii) 01 set of 0-100Amps Ammeter with CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA or equievalant make & model)
(iii) 01 set of 0-500 voltmeter .(DIGITAL)(Secure/L&T or equievalant make)
2
60872
121744
... More
S/I/T&Commissioning of CPRILT indoor floor mounted cubical type UPS outgoing panel made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing.as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board including component list. . 20X10MM Separate Aluminium Earth bus bar should be installed.with 40ka/pole type 2 3P+N Spd in the incomer with 63A 4p backup protection In commer- 01 no 160A 4P MCCB 25kA with TMR based release with adjustable overload ,Icu=100%Ics ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS)
Busbar- 04 numbers of 200Amps 25*5mm copper bus bar Electrolytic copper busbar duly sleeved by color coded PVC sleeve & supported by suitable size DMC insulator. Out going- 06 nos 63A 4P MCCB 16kA with TMR based release with adjustable overload ,Icu=100%Ics, . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.
(ii) 01 set of 0-125Amps Ammeter with CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA or equievalant make & model)
(iii) 01 set of 0-500 voltmeter .(DIGITAL)(Sicure/L&T or equievalant make & model)
1
55455
55455
... More
STAGE PANEL:Incomer:100 A 4P MCCB (25 KA) with adjustable thermal setting Ics = 100% of Icu Bus bar: 4 nos. 100 A CU Busbar duly sleeved 8 Nos 40A DP MCB. (10 KA) Instruments: 1 set.LED type phase indicating lamps with control fuses 8 Nos 40A DP MCB. (10 KA) Complete duly factory wired as per SLD and panel should have proper earth by suitable rated Aluminium flat earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISS and as per special conditions of contract making good the damages caused complete as per the direction of Engineer-in-charge.with 40ka/pole type 2 3P+N Spd in the incomer with 63A 4p backup protection .MAKE OF MCCB- LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS
Make of MCBs- LEGRAND-DPX3/Siemens-Betaguard-Schneider-Acti-9
1
52436
52436
... More
AUDITRIOUM LIGHT PANEL:Incomer:63 A 4P MCCB (16 KA) with adjustable thermal setting Ics = 100% of IcuL Bus bar: 4 nos. 63 A CU Busbar duly sleeved ,15 NOS 10 AMP DP MCB 10 KA ,with 40ka/pole type 2 3P+N Spd in the incomer with 63A 4p backup protection Instruments: 1 set.LED type phase indicating lamps with control fuses,Multifunction meter with 63/5 amp ct opearted Complete duly factory wired as per SLD and panel should have proper earth by suitable rated Aluminium flat earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISS and as per special conditions of contract making good the damages caused complete as per the direction of Engineer-in-charge.MAKE OF MCCB- LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS
Make of MCBs- LEGRAND-DPX3/Siemens-Betaguard-Schneider-Acti-9
1
45226
45226
... More
Supply ,installation ,testing & commissioning of 80KVA UPS SYSTEM WITH IGBT based inverter system, true online double conversion system, inbuilt isolation transformer & automatic phase sequence corrector of 3ph in put to 3 ph output,415V, with built in BMS with battery back up up to 30 minutes with MS Rack for battery Housing, DC cable 7 Mtr with SFU and links for installation (Battery required: 12V, 100AH, 60 No.s) protection for fault by OL,UV,EF,GF,OC,Ph. (Make:Numeric/ Vertiv) as per direction of Engg.-in-Charge. Warranty period of all accessories & component & system must be 2 years & complete test certificate must be submitted along with ups including component list & SLD.
1
1742000
1742000
... More
Supplying, laying & testing of following size of PVC insulated XLPE shethed / strip armoured aluminium / Copper conductor power cables of 1100 volt grade laid directly unground with sand cushioning, brick protection, clamped on surface of the walss / columns / existing RCC / inside masonry cable trenches / on the cable tray /throuth G.I Pipes / hume pipes / PVC pipes as the case may be, including cost of shaddles/ clamps/ markers etc but excluding the cost of G.I. Pipes / Hume pipes cpmplete with making good to the damages as required and as per direction of Engineer-in-charge. MAKE: FINOLEX/ KEI/ POLYCAB/HAVELLS/RR CABLE/GLOSTER
-
-
-
... More
3.5 core x 300 sq mm Aluminium armoured Cable.(FOR Main PANEL)
80
2821
225680
... More
3.5 core x 70 sq mm Aluminium armoured Cable.(FOR HVAC PANEL)
100
764
76400
... More
3.5 core x 50 sq mm Aluminium armoured Cable.(FOR FLOOR PANEL)
52
573
29796
... More
3 core 2.5 sqmm control Aluminium armoured Cable (auditrioum light)
30
189
5670
... More
3 core 2.5 sqmm control copper armoured Cable (auditrioum light)
1900
250
475000
... More
4 core x 16 sq mm Aluminium armoured Cable
180
305
54900
... More
5 corex10 Sqmm control copper armoured Cable (auditrioum light) with termination and brass compression DC glands/ PVC Glands as per direction of Eng-in-Charge
30
996
29880
... More
5 corex 6 Sqmm control copper armoured Cable (auditrioum light) with termination and brass compression DC glands/ PVC Glands as per direction of Eng-in-Charge
30
578
17340
... More
5 corex 4 Sqmm control copper armoured Cable (auditrioum light) with termination and brass compression DC glands/ PVC Glands as per direction of Eng-in-Charge
30
398
11940
... More
Supplying and making end termination with brass double compression gland and aluminium lugs for following mentioned size cable.
-
-
-
... More
3.5 core x 300 sq mm brass double compression gland and aluminium lugs
12
898
10776
... More
3.5 core x 70 sq mm brass double compression gland and aluminium lugs
4
464
1856
... More
3.5 core x 50 sq mm brass double compression gland and aluminium lugs
8
413
3304
... More
4 core x 16 sq mm brass double compression gland and aluminium lugs
6
229
1374
... More
Supplying,installation,testing & commissioning Of Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-Charge. The entire earthing system should be Replacement Warranty will be 2 years
8
18059
144472
... More
Providing and fixing 25 mm X 5 mm GI strip on surface or in recess for connections etc. as required.
200
150
30000
... More
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
110
1444
158840
... More
Supply and fixing of shock treatement charts duly laminated along with separate colour single line diagram laminated, to be fixed in Electrical control panel room.
2
760
1520
... More
Supply and fixing of first aid box with medicines complete with medicine with three years expiry date to be fixed in Electrical control panel room..
2
1500
3000
... More
Supplying of following Materials.
-
-
-
... More
Supply installation of 33kV 3mm thick Class-C Rubber Mat as per IS-15652 and complete as per direction of Eng-in-charge.(Size-10mx1m)
20
822
16440
... More
Danger Board.
2
120
240
... More
SITC of Desktop with 27 inch monitor i7 12th generation 16 GB RAM,8 GB NVIDIA Graphics, 1 TB Hardisk, 512 GB SSD in complete as per the direction of Eng-in-charge.Make-Lenovo Think station(P360) / HP(Z1 Tower G9)
1
115400
115400
... More
Lightning Protection :-
-
-
-
... More
Supply of 8 mm Aluminum Round Conductor.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn
440
149
65560
... More
Supply of Roof conductor holder for parapet- Polyamide
Conductor holder:With M8 female thread or diameter 7mm, M8
Screw to connect the conductor holder.Weather and
temperature resistant from -35 to +90 degree Celsius tested.
Conductor holder @ 1 meter distance.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn
350
51
17850
... More
Supply of Polyamide roof cable holder for flat roof:
DIN 48829 Form B1. Closed form with bottom. Filling weight
1Kg (frost-resistant concrete). Sleeve from polyethylene, black
@ 1 meter distance. Tested as per IEC 62561. Make-OBO/Dehn
85
199
16915
... More
Supply of Connector: For T cross and parallel connectors. Quick
installation using hexagonal bolt M10X30 high-grade hot dip
galvanised. Tested as per IEC 62561.(2nos/expansion piece ).Make-OBO/Dehn
25
203
5075
... More
Supply of 1 mtr vertical air terminal with mounting accessories
on the flat surface to meet the requirements of IS/IEC 62305.
Tested for Electrical , mechanical and chemical as per IEC
62561. Tested for 100kA lightning current. Make-OBO/Dehn
4
1164
4656
... More
Supply of Vertical air terminal with accessories:Providing of Air terminals
as per IS-IEC -62305 part-3
Nominal size Ø10/16 mm aluminium rod:
3 Mtr Airterminal: semi-hard (E-AlMgSiO5 corresponds to DIN
48801) Suitable for high wind load.
Tested as per IEC 62561. Make-OBO/Dehn
4
4374
17496
... More
Supply for Providing of Stand for Fang Fix system 16 kg with base and
clamp ,made up of frost resistant concrete and clamp tested
upto 100KA lightning current . Make-OBO/Dehn
4
2460
9840
... More
Supply for Providing of Stand for Fang Fix system 16 kg made up of frost
resistant concrete. Make-OBO/Dehn
8
954
7632
... More
Supply of Test Joint (Folding Clamp) suitable to connect 8mm
round conductor and max by 30x3 mm GI strip as specified in
drawing and directed by Engineer.
Tested for 100kA lightning current. Make-OBO/Dehn
10
380
3800
... More
Supply of IP 66 Poly Propylene Junction Box. Installation at 1Mtr Height
For Test Joint .Internal dimensions: 100x100x48 mm Make-OBO/Dehn
10
277
2770
... More
Supply of Galvanised Steel Flat 30X3 mm thickness from earth
electrode directly in ground as required. Flat conductor Hot
Dipped Galvanized. Tested as per IEC 62561. Make-OBO/Dehn
190
270
51300
... More
Supply for Providing of Cross connector for Flat: Suitable for 30mm Galvanised steel strip. Installed with 4 nos of hexagonal plate. Tested for 100kA lightning current. Make-OBO/Dehn
20
252
5040
... More
Supply of flat conductor holder- Fit: FL 30, With mounting hole
6.2 x 22 mm, With 2 cylinder bolts M6 x 16 and over-piece from
hot-dip galvanised steel, Bottom section from polyamide, black.
Tested as per IEC 62561. Make-OBO/Dehn
20
261
5220
... More
Supply for Providing of Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric. Make-OBO/Dehn
2
879
1758
... More
Supply of UL Listed maintenance free ,Low carbon copper
coated earth rod of 3 metre electrode having diameter of 17.2
mm with copper coating thickness of 250micron tested as per
IEC 62561-2 Make-OBO/Dehn
10
4183
41830
... More
Supply of universal clamp made of SS to connect rod with flat
conductor Make-OBO/Dehn
10
887
8870
... More
Supply of Earth conductivity enhancing mineral compound shall be of 25
kg/pit tested as per IEC 62561-7,TCLP tested Make-OBO/Dehn
10
2838
28380
... More
Supply of The above arrangements shall be provided with Heavy duty
earth champer of 5000kg load bearing capacity to ensure the
safety of earthing system Make-OBO/Dehn
10
2169
21690
... More
Installation of The above arrangements including all accessories as per Direction of Engg. In charge.
1
35000
35000
... More
HVAC SYSTEM
Supply, Installation, Testing and Commissioning of MULTI semi hermatic type twin screw COMPRESSOR air cooled Chiller, (Make:- Carrier/ Trane/ york/ Daikin) multiple refrigerant circuits, Refrigerant / Air Cooled Motor, Flooded / Hybrid Falling Film type insulated chiller, Air cooled condenser with low noise fans, Integral refrigerant piping, automatic controls & accessories etc. all mounted on steel frame as per specifications. Motor shall be of high efficiency suitable for 400 ± 10% volts, 50± 3% Hz, 3 phase AC supply. Controls shall be suitable for hookup to BMS, compatible with BacNet / Modbus. The chiller should have in built programmable card for soft integration with BMS.
Vendor to submit AHRI Certified performance sheet for the same. Chillers should be with Copper tube and Aluminium finned air cooled condenser with corrossion resistive coating on aluminium fins suitable for all kinds of environmental corrosion . Chiller shall have Micro-processor based controls with graphical / alpha-numeric display in English for all operating parameters such as supply voltage, frequency, load current, chilled water inlet, chilled water outlet & operating pressures etc. Victaulic couplings / connection flanges at the Chiller inlet and outlet shall be supplied along with the chiller package. The display of the chiller should have protective enclosure in order to avoid any water ingress during monsoon. Spring isolators to be provided along with chiller package. Quoted Prices shall be inclusive of vibration isolation.Water IN - ( 12 º C), Chiller Water OUT - (7º C), FLOW - 450USGPM (max), Fouling Factor 0.0180 m2k/kw, Pressure Drop Max - 6.0 Meter, Suitable capacity squirrel cage induction motor with class 'B' insulation suitable for operation on 415 + 10% volts, 50Hz, A.C. supply. (for open type compressor motor, H.P. shall be at least 10% higher than the compressor BHP requirement at full load), Unit mounted starter panel with IP-55 Protection housing with VFD starter for the compressors, Under/over voltage protection, single phase preventers, fuses, & microprocessor based controls. Building control unit & communication card for interfacing with BMS shall be included. - BACNET, Necessary drive arrangement, The condenser coils shall be made of seamless copper tubes, coating on condensor for industrial polluted area internally grooved type arranged in staggered rows and are mechanically expanded into super slit aluminium fins, metallurgically brazed as one piece to enhance aluminium 1 No. - Matching shell & tube flooded type chiller ,. 1 Lot - Refrigerant piping fittings, valves and accessories to inter connect compressor, condenser, chiller and expansion valve. 1 Set - Microprocessor based control panel complete with accessories as per specifications. Lot- Refrigerant line accessories comprising of safety valves, angle valve, liquid line indications, liquid level control etc. Lot - Water flow switches at inlet and outlet of chiller, water drain & air purge valves wherever required. Lot- Suction line and chiller insulation with minimum 32mm thick or more polyvinyl nitrile rubber insulation finished with 0.63mm thick G.S.S. cladding complete as required. Lot - Initial / first charge of refrigerant gas & compressor oil, COP of the chillers shall be 3.0(min)and IPLV shall be 4.2(minimum) at 100% load @ AHRI conditions.Maximum IKW shall be 1.4 at design condition (including condenser fan power consumption) 5 star BEE Chiller Capacity 148 TR Actual Capacity AT 43 DEG C AMBIENT TEMP. with - 2 Working (Make:- Carrier/ Trane/ york/ Daikin)
1
4440000
4440000
... More
Supply, Installation, Testing and Commissioning of MULTI semi hermatic type twin screw COMPRESSOR air cooled Chiller, (Make:- Carrier/ Trane/ york/ Daikin) multiple refrigerant circuits, Refrigerant / Air Cooled Motor, Flooded / Hybrid Falling Film type insulated chiller, Air cooled condenser with low noise fans, Integral refrigerant piping, automatic controls & accessories etc. all mounted on steel frame as per specifications. Motor shall be of high efficiency suitable for 400 ± 10% volts, 50± 3% Hz, 3 phase AC supply. Controls shall be suitable for hookup to BMS, compatible with BacNet / Modbus. The chiller should have in built programmable card for soft integration with BMS.
Vendor to submit AHRI Certified performance sheet for the same. Chillers should be with Copper tube and Aluminium finned air cooled condenser with corrossion resistive coating on aluminium fins suitable for all kinds of environmental corrosion . Chiller shall have Micro-processor based controls with graphical / alpha-numeric display in English for all operating parameters such as supply voltage, frequency, load current, chilled water inlet, chilled water outlet & operating pressures etc. Victaulic couplings / connection flanges at the Chiller inlet and outlet shall be supplied along with the chiller package. The display of the chiller should have protective enclosure in order to avoid any water ingress during monsoon. Spring isolators to be provided along with chiller package. Quoted Prices shall be inclusive of vibration isolation. Chiller Water IN - ( 12 º C), Chiller Water OUT - (7º C), FLOW - 450USGPM (max), Fouling Factor 0.0180 m2k/kw, Pressure Drop Max - 6.0 Meter, Suitable capacity squirrel cage induction motor with class 'B' insulation suitable for operation on 415 + 10% volts, 50Hz, A.C. supply. (for open type compressor motor, H.P. shall be at least 10% higher than the compressor BHP requirement at full load), Unit mounted starter panel with IP-55 Protection housing with Star Delta starter for the compressors, Under/over voltage protection, single phase preventers, fuses, & microprocessor based controls. Building control unit & communication card for interfacing with BMS shall be included. - BACNET, Necessary drive arrangement, The condenser coils shall be made of seamless copper tubes, coating on condensor for industrial polluted area internally grooved type arranged in staggered rows and are mechanically expanded into super slit aluminium fins, metallurgically brazed as one piece to enhance aluminium 1 No. - Matching shell & tube flooded type chiller , . 1 Lot - Refrigerant piping fittings, valves and accessories to inter connect compressor, condenser, chiller and expansion valve. 1 Set - Microprocessor based control panel complete with accessories as per specifications. Lot- Refrigerant line accessories comprising of safety valves, angle valve, liquid line indications, liquid level control etc. Lot - Water flow switches at inlet and outlet of chiller, water drain & air purge valves wherever required. Lot- Suction line and chiller insulation with minimum 32mm thick or more polyvinyl nitrile rubber insulation finished with 0.63mm thick G.S.S. cladding complete as required. Lot - Initial / first charge of refrigerant gas & compressor oil, COP of the chillers shall be 2.8(min)and IPLV shall be 4.6(minimum) at 100% load @ AHRI conditions.Maximum IKW shall be 1.2 at design condition (including condenser fan power consumption) 3 star BEE Chiller Capacity 148 TR Actual Capacity AT 43 DEG C AMBIENT TEMP. with - 2 Working
1
4240000
4240000
... More
Supply, Installation, Testing and Commissioning of BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot water circulation as required in complete as per direction of Engineer in charge. Make - Honeywell / Audco / KITZ/ Belimo .150 mm Butterfly Valve
8
8333
66664
... More
Butterfly Valve - 80 mm Dia
4
4846
19384
... More
Butterfly Valve - 65 mm Dia
2
4530
9060
... More
Supplying, fixing, testing and commissioning of following sizes Motorized Butterfly Valve with CI Body, SS Disc, O - ring and minimum PN-16 pressure rating, conforming to BS 5155, IS 13095, with IP-55 actuator, capable of accepting upto 10V DC, and upto 20 mA electric signal and providing similar transduced feedback output to control system as required in complete as per direction of Engineer in charge. (Make - Belimo , Siemens , Honey Well , Kitz ) 150 mm Motorized Valve
2
42877
85754
... More
Balancing valves with built in measuring facility
with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as required in complete as per direction of Engineer in charge. Make - Honeywell , Audco . KITZ, Belimo .150 mm Dia
2
34461
68922
... More
Balancing Valve - 80 MM Dia
2
13771
27542
... More
Balancing Valve - 65 MM Dia
1
12325
12325
... More
Supply, Installation, Testing and Commissioning of Temperature Gauge as required in complete as per direction of Engineer in charge.
14
1191
16684.5
... More
Supply, Installation, Testing and Commissioning of Pressure Gauge as required in complete as per direction of Engineer in charge.
14
953
13347.6
... More
WATER PUMPS PRIMERY Supply, installation, testing & commissioning of pumps for outdoor duty application consisting of:- a) Pump and motor(suitable for outdoor and continuous operation), b) Mounting frame & vibration isolators, c) Earthing of motor (IP-52) & frame, d) Lifting & mounting of the pumps at locations as shown in drgs, e) All accessories like Vibration isolators ,Flexibles,required wells for temeprature/pressure sensors for BMS connectivity, eccentric reducers and expanders etc., f) Insulation of the pumps and accessories as per the given specifications, g ) including insulation and cladding, h) Vendor to study the site condition and the cost should include all the transportation cost , loading unloading cost, shifting the equipment to Plant room etc.,Chilled water pumps:- Chilled Water Primary Pumps for air cooled chiller Centrifugal End suction pumps with insulation USGPM. 390 GPM @ 20 m head (2Working ), Min Efficency 70 % , Casing Cast Iron , Impeller Bronze , Seal _ mechnical , Max RPM - 1450 , Motor Type - Squirrel Cage Induction , Duty , Continious .At the time of odering pump head calculation shall be submitted by the bidder if any increase in head, no additional cost will be paid by the agency. (Make - Xylum , Grundfos, Armstrong)
2
234371
468743.1
... More
Supply, Installation, Testing and Commissioning of Non return/Check valves : with duel plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating for chilled / hot water circulation including insulation as required in complete as per direction of Engineer in charge.Make - Honeywell , Audco . KITZ, Belimo - 150 mm Dia
2
9209
18418
... More
Supply, Installation, Testing and Commissioning of Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled/ hot water circulation including insulation as specified. Make - Honeywell , Audco . KITZ, Belimo - 150 mm Dia
2
28033
56066
... More
Y Strainer - 80 mm Dia
2
9882
19764
... More
Y Strainer - 65 mm Dia
1
7961
7961
... More
AIR HANDLING UNIT - 2 Stage Filtration- with VFD -Supply, Installation, testing and commissioning of factory fabricated double skin outdoor type Air Handling Units (BMS compatible) Floor Mounted Units for High Precision Zones as per specifications given below:-AHU Construction:- It shall be made out of min.0.6 mm pre-plasticized/pre-coated Galvanised steel sheet outside & 0.6 mm plain stainless steel sheet inside with 50 mm thick PUF insulation factory injected between them by injection moulding m/c, with density not less than 38 kg/Cum between them. Drain pan (made out of 1.25 mm stainless steel (SS Grade 304) sheet insulated with 19 mm think closed cell insulation(Nitrile/XLPE) & thermal break profile. Necessary foundation required & anti vibration pads shall be provided & cost for the same shall be included in this item. Supply Air Stream:- 1) Filter section consisting of pre filter and microvee/fine filter . Pre-filter section shall be with non woven synthetic media of 10 micron particle size with an efficiency of 90%, fine/microvee filter section will be with filters of non woven synthetic media of 3 micron particle size of efficiency 99%.2) BACKWARD CURVED PLUG/Centrifugal fans (with min. 70% efficiency) with blower motor, drive and flexible duct connection. The supply fan shall be provided with variable frequency drive and input / output signal compatible to BMS system.3) 6 row deep cooling coil 4) No Heating Coil Required 5) 50 mm Thick Puf Panel with Inner and outer Sheet of .6 mm thick both Side 6) Mixing Box comprising of damper & filter section.COIL- Copper tubes and Aluminium fins 12-13 fin./inch, Coil size shall be selected for air velocity of 500 ft/minute 12deg Celcius coil leaving temp & velocity across filters at 500 ft/minute. Motors shall be suitable for 415 ± 10% volts, 50 Hz, 3 phase AC supply & high efficiency(IE 3). Vibration isolation shall be as per specifications and as shown on the drawings. VFD:- VFD designed for HVAC applications with built-in PID controller, control panel (keypad & display) , IP-54 enclosure for use on standard BACKWARD CURVED PLUG/Centrifugal fans. The display should be in alpha-numeric characters and programming facility should be in user-friendly HVAC terminology. IP 20 Rated VFD to be placed inside the Stater Panel with IP 55 enclosure. Each VFD panel to be provided with digital display showing electrical parameters like voltage,current and power consumption.Sound level 72 db at the distance of 2 mtr.(maximum)Squirrel cage induction motors suitable for 415 ± 10% volts, 50 Hz, AC supply & high efficiency (IE-3 Efficiency), H.P of motor and coil shall be as per actual selection meeting other technical requirements. At the time of odering ahu total pressure loss as per friction method and ahu coil selection should be submitted for approval.INTAKE AIR DBT/RH-25.5 Deg. Cel./59%, Discharge air DBT/RH-12/96%. if any increase in head, no additional cost will be paid by the agency.23000 CFM / 6 RD CC / 86 mm TSP with Pre & Fine Filter - (Make:- VTS/ Trane/Systemair)
2
1127000
2254000
... More
Supply, Installation, Testing and Commissioning of following sizes electronic, self-balancing, pressure independent type dynamic balancing valve with integrated 2 way modulating control valve in a single body. The actuator shall be capable of accepting upto 10V DC and upto 20 mA electric signal and shall provide similar transduced feedback output to control system. Maximum close off pressure shall not be less than 6 Bar for upto 50 mm valves and 7 Bar for 65 mm & above. Valves should have pressure rating of 25 Bar minimum. PICV Valve: 65 mm Dia
2
53822
107644
... More
Supply, Installation, Testing and Commissioning of Thermostat - Digital Type as required in complete as per direction of Engineer in charge. (Siemens RDU 340/Honeywell)
2
5122
10244
... More
Supply, Installation, Testing and Commissioning of CPRI approved 2mm CRCA Starter panel with vfd and dol as bypass provision for BMS,MPCB,OLR fire damper as required in complete as per direction of Engineer in charge.make: Siemens/Schneider
2
45000
90000
... More
Supply, Installation, Testing and Commissioning of VFD as per AHU motor calculation next higher capacity continuous duty ,BMS RJ45 compatible with Panel as required in complete as per direction of Engineer in charge.make: schneider/abb/siemens/delta/LK(L&T)
2
23347
46695.6
... More
AIR HANDLING UNIT - 2 Stage Filtration- with VFD -Supply, Installation, testing and commissioning of factory fabricated double skin type Air Handling Units (BMS compatible) Floor Mounted Units for High Precision Zones as per specifications given below:-AHU Construction:- It shall be made out of min.0.6 mm pre-plasticized/pre-coated Galvanised steel sheet outside & 0.6 mm plain stainless steel sheet inside with 40 mm thick PUF insulation factory injected between them by injection moulding m/c, with density not less than 38 kg/Cum between them. Drain pan (made out of 1.25 mm stainless steel (SS Grade 304) sheet insulated with 19 mm think closed cell insulation(Nitrile/XLPE) & thermal break profile. Necessary foundation required & anti vibration pads shall be provided & cost for the same shall be included in this item. Supply Air Stream:- 1) Filter section consisting of pre filter and microvee/fine filter . Pre-filter section shall be with non woven synthetic media of 10 micron particle size with an efficiency of 90%, fine/microvee filter section will be with filters of non woven synthetic media of 3 micron particle size of efficiency 99%.2) BACKWARD CURVED PLUG/Centrifugal fans (with min. 70% efficiency) with blower motor, drive and flexible duct connection. The supply fan shall be provided with variable frequency drive and input / output signal compatible to BMS system.3) 6 row deep cooling coil 4) No Heating Coil Required 5) 40 mm Thick Puf Panel with Inner and outer Sheet of .6 mm thick both Side 6) Mixing Box comprising of damper & filter section.COIL- Copper tubes and Aluminium fins 12-13 fin./inch, Coil size shall be selected for air velocity of 500 ft/minute & velocity across filters at 500 ft/minute. Motors shall be suitable for 415 ± 10% volts, 50 Hz, 3 phase AC supply & high efficiency(IE 3). Vibration isolation shall be as per specifications and as shown on the drawings. VFD:- VFD designed for HVAC applications with built-in PID controller, control panel (keypad & display) , IP-54 enclosure for use on standard BACKWARD CURVED PLUG/Centrifugal fans. The display should be in alpha-numeric characters and programming facility should be in user-friendly HVAC terminology. IP 20 Rated VFD to be placed inside the Stater Panel with IP 55 enclosure. Each VFD panel to be provided with digital display showing electrical parameters like voltage,current and power consumption.Sound level 72 db at the distance of 2 mtr.(maximum)Squirrel cage induction motors suitable for 415 ± 10% volts, 50 Hz, AC supply & high efficiency (IE-3 Efficiency), H.P of motor shall be as per actual selection meeting other technical requirements.INTAKE AIR DBT/RH-25.5 Deg. Cel./59%, Discharge air DBT/RH-12/96% 11000 CFM / 6 RD CC / 89 mm TSP for the Stage :- (Make:- VTS/Tarne/Systemair)
1
539000
539000
... More
Supply, Installation, Testing and Commissioning of following sizes electronic, self-balancing, pressure independent type dynamic balancing valve with integrated 2 way modulating control valve in a single body. The actuator shall be capable of accepting upto 10V DC and upto 20 mA electric signal and shall provide similar transduced feedback output to control system. Maximum close off pressure shall not be less than 6 Bar for upto 50 mm valves and 7 Bar for 65 mm & above. Valves should have pressure rating of 25 Bar minimum. PICV Valve: 50 mm Dia Make-Siemens/Honeywell/Belimo
1
34863
34863
... More
Supply, Installation, Testing and Commissioning of CPRI approved 2mm CRCA Starter panel with vfd and dol as bypass provision for BMS,MPCB,OLR fire damper as required in complete as per direction of Engineer in charge.make: Siemens/Schneider
1
40000
40000
... More
Supply, Installation, Testing and Commissioning of VFD as per AHU motor calculation next higher capacity continuous duty ,BMS RJ45 compatible with Panel as required in complete as per direction of Engineer in charge.make: schneider/abb/siemens/delta/LK(L&T)
1
18687
18687
... More
Supply, Installation, Testing and Commissioning of Thermostat - Digital Type as required in complete as per direction of Engineer in charge. (Siemens RDU 340/Honeywell)
1
5122
5122
... More
SITC of the FCU Unit with 3 RD & 3 Speed with Extended Drain Tray sandwich with Insulation . The Unit Shall be compatible with Two Way control valve & Thermostat suitable for making the System Funcational Capacity of Unit . The Unit Shall be Silent Type of 3 TR. (Make-VTS/Trane/senco)
4
45000
180000
... More
SITC of two Way Motorized control valve for FCU of follwing size for Units as required in complete as per direction of Engineer in charge. (Make - Siemens , Honeywell , Belimo). 25 mm
4
16107
64428
... More
Supply, Installation, Testing and Commissioning of Thermostat - Digital Type as required in complete as per direction of Engineer in charge. (Siemens/Honeywell)
4
5122
20488
... More
Control Wiring
100
58
5880
... More
INSULATED CHILLED WATER PIPING ( EXPANDED POLYSTYRENE INSULATION) -Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with fire retardant quality expanded polysterene moulded pipe section of density 20 kg/cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessain and finally applying 0.63 aluminium sheet cladding complete with type3, grade 1 roofing feltstrip (as per IS:1322 as amended up to date) at joints repairing of damage to building etc. as per specifications and as required complete in all respect.
Note: The Pipes of sizes 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.make- TATA/JINDAL/SAIL (75 mm insulation) 200 NB x 6.3 mm thk.
90
7226
650340
... More
150 NB heavy (50 mm insulation)
110
4834
531740
... More
125 NB heavy (50 mm insulation)
80
4057
324560
... More
100 NB heavy (50 mm insulation)
100
3468
346800
... More
80 NB heavy (50 mm insulation)
150
2714
407100
... More
65 NB heavy (50 mm insulation)
50
2300
115000
... More
50 NB heavy (50 mm insulation)
40
1917
76680
... More
40 NB heavy (50 mm insulation)
10
1631
16310
... More
32 NB heavy (50 mm insulation)
10
1430
14300
... More
25 NB heavy (50 mm insulation)
10
1292
12920
... More
Supply, erection, testing & commissioning of UPVC condensate Drain Piping complete with fittings, supports and all accessories alongwith 9mm thick Nitrile Rubber insulation. Pipes shall conform to ASTM D1785 Sch 40 and fittings shall be of Sch 80 conforming to ASTM D2467. The insulation material shall be Closed cell rubber as required in complete as per direction of Engineer in charge. 50 NB
45
450
20270.25
... More
40 NB
100
355
35595
... More
Suuply and installation of HDPE/ PVC Tank with insulation - 1000 Ltrs with structure
1
24360
24360
... More
Supply, Installation, Testing and Commissioning of Auto Air Vent Valves as required in complete as per direction of Engineer in charge. 25 NB
10
2050
20502
... More
Supply, Installation, Testing and Commissioning of Flexible Connector / Rubber Below (with Flanged ends) as required in complete as per direction of Engineer in charge. 150 NB
12
4092
49114.8
... More
Supply, erection, testing & commissioning of Water line Flow Switch as required in complete as per direction of Engineer in charge.
3
2026
6079.5
... More
Pressure/Temperature Test Point
13
536
6975.15
... More
Supply, installation, balancing and commissioning of GSS sheet ,120 GSM metal rectangular/round spiral ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, supports etc. duly hanged/ suspended by Supporting arrangement as per approved drawings and specifications of following sheet thickness complete as required in complete as per direction of Engineer in charge. 24 G Make-TATA/Jindal/Sail
2400
1155
2772000
... More
22 G
1900
1337
2540300
... More
20 G
290
1624
470960
... More
18 G
100
2044
204400
... More
Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (class “O”) insulation on existing duct after applying two coats of cold setting adhesive (CPRX compound). The joints shall sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as required in complete as per direction of Engineer in charge.. 25 mm thick Make-A-FLEX/K-FLEX/Armacell
4590
861
3951990
... More
SITC of Jet Diffusers for Supply Air along with VCD.Make-Systemair/Glenstorm/Airflow
110
8387
922614
... More
SITC of Supply air Diffuser ( for Below the Balcony Sitting Area ) .Make-Systemair/Glenstorm/Airflow
3
5637
16912.35
... More
SITC of Linear Grill for Supply Air along with VCD Make-Systemair/Glenstorm/Airflow
5
6993
34965
... More
SITC of Linear Grill for Return Air along without VCD Make-Systemair/Glenstorm/Airflow
5
4243
21215.25
... More
SITC of Motorized Fire Damper.Make-Systemair/Glenstorm/Airflow
4
14070
56280
... More
Supply, Installation, Testing and Commissioning of Actuator - 10 Nm as required in complete as per direction of Engineer in charge.Make-Systemair/Glenstorm/Airflow
12
8342
100107
... More
Supply, Installation, Testing and Commissioning of Freash Air Damper as required in complete as per direction of Engineer in charge.Make-Systemair/Glenstorm/Airflow
19
4552
86503.2
... More
Supply, Installation, Testing and Commissioning of Canvass Connection as required in complete as per direction of Engineer in charge.
40
1311
52458
... More
Supply and fixing of open cell acoustic 19mm insulation (density-240kg/cubic m)Make-A-FLEX/K-FLEX/Armacell
100
1100
110000
... More
Volume Control Dampers for Supply Air Collars:- Supply and Installation of Black MS Box- Type Volume Control Dampers for Collar.-Make-Systemair/Glenstorm/Airflow
4
3307
13230
... More
Toilet Ventilation:- Supply, erection, testing & commissioning of Inline fan for Toilet Exhaust. Scope to provide incoming power to this fans is not included in this item. 1000 CFM @ 10 mm Static Pressure (Make:- Kruger/Nictora/Systemair)
3
14748
44244.9
... More
Smoke Extraction:- Supply of tube axial type axial flow fans complete with casing, impeller and H Class motor with for smoke extraction. Motor shall be suitable for operation on 415±10% volts, 50Hz, 3 phase AC power supply and capable to withstand 250 Deg C temperature for a minimum duration of 2 hours. Axial flow fans shall be provided with necessary vibration isolation arrangement. Fan should be AMCA certified. (Motor Make : ABB / Siemens / CGL ). Fans shall be with suitable individual electerical starter Panel. 15000CFM @ 25 mm Static Pressure (Make:- Kruger/Nictora/Systemair)
2
52020
104040.3
... More
FIRE FIGHTING WORKS
Supply , installation, testing & commissioning of Motor driven end suction Back pullout type Centrifugal pump delivering 2280 LPM at 88 Mtr head with CI casing bronze impeller and SS shaft with mechanical seal (for Wet riser & Sprinkler system) with 2 pole TEFC motor suitable for operation on 415 V ,3 ph, 50 C/s AC supply and complying to TAC norms including providing base frame coupling,coupling guard as per direction of Engineer-in-charge ( Make: KIRLOSKAR/WILO
1
354748
354748
... More
Supply , installation, testing & commissioning of Diesel Engine driven end suction Back pullout type Centrifugal pump having 2280 LPM at 88 Mtr head with CI casing bronze impeller and SS shaft with mechanical seal and suitable diesel engine complying to TAC norms along with all accessories including control wiring between panel & DG set and fuel storage tank including providing base frame coupling,coupling guard as per direction of Engineer-in-charge.. Make: KIRLOSKAR/WILO
1
560559
560559
... More
Supply , installation, testing & commissioning of Motor driven end suction Back pullout type Centrifugal Jocky pump delivering 180 LPM at 88 Mtr head with CI casing bronze impeller , SS shaft with mechanical seal and 2 pole TEFC electric motor suitable for operation on 415 V ,3 ph, 50 C/s AC supply including providing base frame coupling,coupling guaaard as per direction of Engineer-in-charge.Make: KIRLOSKAR/WILO
1
111227
111227
... More
Supplying, installation, testing and commissioning of Electric Motor Driven Pressurization Terrace Pump having discharge of 450 LPM at 35 MWC head complete with Pump Set, Electric Motor suitable for operation on 415 V ,3 ph, 50 c/s AC supply , Base Frame , 1 no. pressure switch, 1 no. pressure gauges, 2 nos. Butterfly valves, 1 no. NRV as requiredMake: KIRLOSKAR/WILO
1
105362
105362
... More
Supply,Installation,Testing & Commissioning of dust and vermin proof front operated compartmentalised cubicle type control panel suitable for operation on 415 Volt, 3 ph, 50 c/s power supply with 400 Amp TPN Aluminium busbar fabricated out of 2 mm thick CRCA sheet duly powder coated after treatment in 7 tank process with top entry cable gland plate including interconnections, earth bus as required comprising of :
INCOMING: One(1)- 250 Amp 25 KA TP with solid neutral SDFU Voltmeter with s/s, Ammeter with S/s, 3 Nos 400/5 metering CTs of Class 1.0, ON/ OFF indicating lamps, 3 Nos Phase indicating lamp and 4P 6A MCB OUTGOING: a)1 NOS of -160 Amp 25KA TP MCCB, with star delta starter suitable for motor with O/L release, ON/ OFF push button, ON/ OFF indicating lamp, 3 Nos CTs metering CTs 160/5, Ammeter S/S.
b) (Outgoing) – 2 NOS of 63 Amp 16kA TP MCCB, with star delta starter suitable for motor with O/L release, ON/ OFF push button, ON/ OFF indicating lamp,3nos 63/5 CT,Ammeter,S/S
c) 1 Set – Control for diesel engine comprising -Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required,
push buttons, start/stop in manual mode Relay, Battery Charger, Annunciation Panel, Control wiring of pressure switches, flow switches and starters etc as required for auto and manual operation of Jockey pumps, Main Electric Pumps and Diesel Engine Pump All standard relays and accessories for
automatic operation of diesel engine System Controller as per direction of Engineer-in-charge.d)1 lot control wiring from pressure switch to panel board through auxiliary contactor with 1.5 sq. mm unarmoured PVC insulated ,PVC sheathed copper cable etc as required.Make of Switchgear-Siemens/Schneider/Legrand
1
234421
234421
... More
Supply, installation, testing and commissioning of Floor/Wall mounted sectionalised, front operated top entry dust and vermin proof M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrinkable PVC sleeve, base frame, complete with all accessories including interconnections, earth bus etc as required comprising of. One (1)- 63 Amp, 10 KA,TPN (Class-C) MCB with 3 Nos Phase indicating lamps with control fuse/ MCB, Digital Voltmeter with selector switch. DOL starter with O/L and Single Phasing Preventor suitable for motor. ON/OFF indication lamps, Auto manual switch and ON/OFF push button.One (1) - Set of Auxilliary relay for automatic operation through pressure switch.
1
34842
34842
... More
Supply & Laying of XLPE power cable of 1.1 KV grade of following size on Cable
-
-
-
... More
3.5 core 240 sqmm xlpe Armoued cable
40
2070
82800
... More
3.5C X 120 sqmm xlpe Armoued cable
80
1124
89920
... More
3.5C X 70 sqmm xlpe Armoued cable
70
714
49980
... More
3C X 16 sqmm xlpe Armoued cable
80
265
21200
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, inconvenient sections, joined with connectors, suspended from
the ceiling with G.I. suspenders including G.I. bolts & nuts, etc.
as required.
-
-
-
... More
150 mm (W) X 50 mm (H) with 1.6 mm thick sheet
80
644
51520
... More
300 mm (W) X 50 mm (H) with 1.6 mm thick sheet
50
875
43750
... More
Cable laying Laying & fixing of one no. PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size on Cable Tray as required.
-
-
-
... More
Upto 35 Sqmm
100
33
3300
... More
Above 35 Sqmm and upto 95 sqmm
100
74
7400
... More
End Termination
-
-
-
... More
Supply & Making end Termination with brass compression gland and aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade (without cost of Cable)
-
-
-
... More
3.5C X 120 sqmm
2
808
1616
... More
3.5C X 70 sqmm
2
637
1274
... More
3.5C X 16 sqmm
8
210
1680
... More
PIPE & VALVES ETC.
Supply,Installation,Testing & Commissioning of 'C' Class heavy duty MS pipe (as per IS 1239 upto 150 mm NB and IS 3589 for above 150 mm 6mm thick) with flanges and fitting such as bends, tees, reducers, rubber insertions and galvanized nuts and bolts of following size on surface along wall / shaft with MS bracket, suspended from ceiling/ beam with suspenders duly painted with two coats of primer and finished with enamel paint of approved colour laid through pipe or in trench after wrapping with hassen cloth after applying coal tar primer as required as per direction of Engineer-in- charge.MAKE:JINDAL/TATA/sail
-
-
-
... More
200mm NB
20
4768
95360
... More
150mm NB
250
3780
945000
... More
100mm NB
80
2457
196560
... More
80mm NB
40
1360
54400
... More
Providing, fixing, testing and commissioning of following size manually operated hand lever type cast iron double flanged slim seal wafer type Butterfly valves with EPDM iron disc as per IS-13095 having pressure ratting PN -1.60 including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure etc. all complete as per specification & direction of E.I.C.MAKE:Zoloto/Audco
-
-
-
... More
150mm NB
5
7890
39450
... More
100mm NB
5
5330
26650
... More
80mm NB
1
4670
4670
... More
Providing, fixing, testing and commissioning of following size cast iron GATE valves as per IS-14846 having pressure ratting PN -1.60 including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure etc. all complete as per specification & direction of E.I.C.MAKE:Zoloto/Audco
-
-
-
... More
200mm NB
2
35631
71262
... More
150mm NB
3
20887
62661
... More
100mm NB
2
13688
27376
... More
80mm NB
1
10566
10566
... More
Providing, fitting & fixing of following size cast iron double flanged type dual plate Non return Valve as per IS- 5312 (Part 1): 2004 with ISI mark of pressure ratting PN-1.60 including fixing the same with supply of required jointing materials like flanges, rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure etc. all complete as per specification & direction of Engineer-in-charge. MAKE:Zoloto/Audco
-
-
-
... More
150mm NB
4
14670
58680
... More
80mm NB
1
4350
4350
... More
Supply,Installation,Testing & Commissioning of orifice plate made of 6mm thick stainless steel with orifice of required size in between flane and landing valve of external and internal hydrant to reduce pressure to working pressure of 3.5 Kg/ sq cm complete as required.
4
1134
4536
... More
Supply,Installation,Testing & Commissioning of Pressure gauge of 0-16 Kgf/sq.cm. range with cut-off bronze ball valves of suitable size with all accessories as per direction of Engineer-in-charge.MAKE: H.GURU/G.GURU
4
1580
6320
... More
Supply,Installation,Testing & Commissioning of Pressure Switch with cut-off bronze ball valves with integral strainer & flare nut (mixed ends) of suitable size with all accessories as per direction of Engineer-in-charge.MAKE: DANFOSS/INDFOSS make
4
3170
12680
... More
Supply,Installation,Testing & Commissioning ofstainless steel 150 MM Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange as required.MAKE: Zoloto/Audco
2
14670
29340
... More
Supply,Installation,Testing & Commissioning ofstainless steel 100 MM Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange as required.MAKE: Zoloto/Audco
1
8900
8900
... More
Supply,Installation,Testing & Commissioning ofstainless steel 80 MM Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange as required.MAKE: Zoloto/Audco/Kartar
1
6780
6780
... More
Supply,Installation,Testing & Commissioning of Air vessel made of 250mm dia, 8mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia Gun metal wheel valve, with required accessories, pressure gauge and painting with synthetic enamel paint as required.
1
18005
18005
... More
Supply,Installation,Testing & Commissioning of 150 NB C.I. PRV with matching flanges as per direction of Engineer-in-charge.
2
8824
17648
... More
Supply,Installation,Testing & Commissioning of 150NB Alarm Valve , Water Motor Gong Retarded Chamber, Flange to:- ANSI B 16. 1 Class 125/ANSI B16.5 Class 100, All Components are UL Listed/FM Approved , Rated pressure 17.50 kg/cm2, Test pressure 500PSI confirming to IS :15105:2002 with ISI mark as per direction of Engineer-in-charge. Make-system sensor/Siemens
1
37354
37354
... More
WET RISER CUM RING SYSTEM
-
-
-
... More
Supply,Installation,Testing & Commissioning of Stainless steel Hydrant Valve / Landing valve, of 63 mm NB size, type-A, single headed , oblique type, as per IS :5290/93 and as per direction of Engineer-in-charge. MAKE: Omex/Fireshield/Safeguard/Minimax
8
5208
41664
... More
Supply,Installation,Testing & Commissioning of SS short branch pipe with 63 mm male inlet and 19 mm outlet nozzle, as per IS:903 and as per direction of Engineer-in-charge.MAKE: MAKE: Omex/Fireshield/Safeguard/Minimax
8
2113
16904
... More
Supply,Installation,Testing & Commissioning of 63 mm NB and 15meter long RRL Fire Hose fitted with 63mm intstantaneous stainless steel male & female SS coupling, complete by GI wire binding for Internal Hydrant as per direction of Engineer-in-charge.MAKE: MAKE: Omex/Fireshield/Safeguard/Minimax
16
4569
73104
... More
Providing supply & fixing of MS Hose Box for of suitable size(750X600X250mm) to accomodate 2 nos. of 15/ 1 no of 30 mtr long fire hose and a branch pipe, wall mounted type as per direction of Engineer-in-charge. MAKE: Omex/Fireshield/Safeguard/Minimax
8
3500
28000
... More
Supply,Installation,Testing & Commissioning of Swinging pattern wall fixing first aid hose reel made from MS sheet and waterways and moving parts with rubber hose of 20 mm dia. and 30 mtrs. long with ABS(Plastic) shut-off nozzle as per IS: 444/IS: 12585 Type-I., complete with all accessories as per direction of Engineer-in-charge. MAKE: Omex/Fireshield/Safeguard/Minimax
4
7300
29200
... More
Providing, fitting & fixing of 4-Way GM fire brigade connection consisting of 63 mm dia instantaneous type male couplings with built-in check valves, 150mm dia flanged outlet complete with bolts, nuts and rubber insertions confirming to IS:904 with ISI mark including testing & commissioning the system etc. all complete as per apporoved specification & direction of EIC.MAKE: Omex/Fireshield/Safeguard/Minimax
2
12147
24294
... More
EXTINGUISHER SYSTEM
-
-
-
... More
Portable Fire Extinguisher System Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made from ISI marked seamless cylinder confirming to IS: 7285, fitted with ISI marked controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket as per direction of Engineer-in-charge. (Make: SUPREMEX / CEASEFIRE/MINIMAX)
2
7700
15400
... More
Supplying, installation, testing and commissioning of ABC type fire extinguishers of 6 kg capacity including cost of all material & labour etc complete.(Make: SUPREMEX / CEASEFIRE/MINIMAX)
12
3264
39168
... More
Supplying, installation, testing and commissioning of Mechanical Foam type 9 litre capacity Fire Extinguisher, ISI marked, IS: 10204, containing 540 ml AFFF liquid ISI marked, IS: 4989 Part II and a polyurethane coated CO2 Gas Cartridge, ISI marked, IS: 4947 complete with gunmetal union cap, nylon hose with plastic foam making branch and wall mounting bracket as per direction of Engineer-in-charge.(Make: SUPREMEX / CEASEFIRE/MINIMAX)
2
3659
7318
... More
AUTOMATIC FIRE DETECTION & ALARM SYSTEM
-
-
-
... More
Supplying, installing, testing and commissioning of adressable multi sense smoke detector with inbuilt isolator module,base, junction box and other accessories.Make-Morley IAS/Siemens/Bosch/Edward/Notifier
20
3500
70000
... More
Response Indicator. Morley IAS/Notifier/Siemens/Bosch/Edward
20
320
6400
... More
Supplying, installation, testing and commissioning of Intelligent Reflective Beam Detector with 4 pieces Reflectors, Capable used as Conventional detector, Fire and Fault signal relays available, 24VDC required, Detection Range 8-100 Meters (Certified by LPCB): GREEN / AMBER / RED ,UL Listed & FM Approved, Makes: Morley IAS/Notifier/Siemens/Bosch/Edward
3
60902
182706
... More
Supply, Installation,Testing & Commisioning of 2 loop Microprocessor based Addresable fire alarm control panel , fully networkable with each loop capable of taking 99 devices, 8 line x 40 character alpha- numeric liquid crystal display .The panel shall be soft addressable type . The panel shall be able to give pin point location of all fire/fault conditions. Further, the panel must be able to automatically switch off respective control switches when ever any alarm is triggered. The panel shall have integral SMF lead acid batteries with sealed cells of 24 V capable of running for a minimum of 8 hours with integral battery charger complete as required and as per specification. The fire alarm panel shall be suitable for software integration with BMS & PA system.Make-Morley IAS/Siemens/Bosch/Edward/Notifier
1
186000
186000
... More
Supplying, installation, testing & commissioning of Addressable Single Output Module,Single Output Module, provides dry contact (Loop powered) or active output (24VDC required, cable monitored) (Certified by LPCB)) indicates system status: GREEN / AMBER / RED ,UL Listed. Makes: Morley IAS/Notifier/Siemens/Bosch/Edward
1
6052
6052
... More
Supplying, installing, testing and commissioning of Addressable Manual Call Point with back box.Make-Morley IAS/Siemens/Bosch/Edward/Notifier
8
5161
41288
... More
Supplying, installing, testing and commissioning of Analogue Addressable Loop powered Sounder with strobe light.Make-Morley IAS/Siemens/Bosch/Edward/Notifier
8
6941
55528
... More
Supplying and drawing of 2X1.5 sq.mm PVC insulated PVC Sheathed FRLS copper armoured cable in the existing surface/ recessed conduit with all accessories as per direction of Engineer-in-charge. Make-Polycab/KEI/Havells/Finolex/RR Kabel
300
86
25800
... More
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable with pvc ,600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required Make-Polycab/KEI/Havells/Finolex/RR Kabel
200
165
33000
... More
Supplying and fixing of following sizes of heavy class FRLS PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
20mm dia
100
89
8900
... More
25mm dia
200
107
21400
... More
Supply, installation, testing and commissioning of 5 LB Clean Agent system complete with all necessary Clean Agent FK-5-1-12 / Novec 1230 (UL listed ) gas with PESO approved Cylinder , fitting, support , and accessories, connected with CE , PI Mark & PESO approved DLP Valve, End of Line Adaptor and Pressure Switch. Cylinder will be Helium Leak Tested to 10-7 mbar l/s for leakage proof (Make: SUPREMEX / FIREBOY / AMREX)
3
148740
446220
... More
Supply & Laying of Linear pneumatic heat Detection Tube with all necessary fittings & supports. (Make: SUPREMEX / FIREBOY / AMREX)
62
2538
157356
... More
Supply, installation, testing and commissioning of Health Monitoring Panel with Audio Visual Alarm. The Panel Should have Provision for integration with Fire Alarm/ SCADA/ BMS System. (Make: SUPREMEX / FIREBOY / AMREX).
3
6555
19665
... More
STAGE LIGHTING & STAGE DRAPERY SYSTEM
-
-
-
... More
The scope of work encompasses the supply, installation, laying, testing, commissioning, and programming of 350W 17R Sharpy Moving Head Stage Lights with DMX Beam Spot Wash effects for an auditorium setting, ensuring that all fixtures are delivered fully calibrated and ready for immediate use. These advanced lighting fixtures, designed to create different moods and scenes on stage, are key to highlighting performers with adjustable intensity and color temperature, while also offering extensive lighting coverage. The proposed lights feature a 350W bulb, voltage compatibility of AC110V-240V, and a fixed color wheel with 13 colors plus white, including a six-color film capable of producing a seven-color effect. Additionally, the fixtures offer 10 fixed patterns with linear pattern options, double prisms with bidirectional independent rotation, and a beam angle range of 0-38 degrees. The lights connect multiple fixtures in series and utilize DMX signal loop in and out, with 5 pin XLR connectors, adhering to the latest CE and RoHS Certification standards. The product is constructed from durable materials such as aluminum, glass, plastic, and metal, and offers benefits like high efficiency, extended lifespan, minimal maintenance, low heat generation, and no UV output. Installation will be meticulously executed according to Architectural Drawings and Engineer-in-Charge (EIC) instructions, with placement drawings required before work assignment. The skilled installation team will use all necessary tools and machinery, ensuring the highest standards of quality, precision, and safety.50000hr burning hour report The proposed lighting system must be user-friendly and capable of being controlled by a single command from the lighting console, ensuring seamless operation. A comprehensive onsite training program will be provided to the end-user to ensure proper operation and maintenance, with all products covered by a minimum three-year unconditional warranty. Any deviations from the specified standards will not be accepted, though higher or improved specifications are welcome, provided they meet the project’s stringent requirements for performance and reliability (Make:- ETC, ADJ, Leksa lighting, Canara Lighting)
10
58200
582000
... More
The scope of work encompasses the supply, installation, laying, testing, commissioning, and programming of 300W Fresnel Spot Light, meticulously designed to achieve the desired lighting effects and maximize visibility. The proposed fixtures, known for their smooth wash, adjustable zoom capabilities, and incredible brightness, must be delivered fully calibrated and ready for immediate use, ensuring the creation of the perfect stage atmosphere. The installation will be executed in strict accordance with the Architectural Drawings and the Engineer-in-Charge (EIC) instructions, detailed placement drawings of the fixtures prior to commencement of work, This includes the provision of all necessary tools, machinery, manpower, staging, and required consumables, guaranteeing acomprehensive and seamless process. The project will be carried out by a skilled and experienced team, adhering to the highest standards of quality, precision, and safety. The 300W Fresnel Spot Lights feature an adjustable beam size, even light distribution, and flexibility in lighting design, with a power consumption of 380W and input voltage of AC100V-240V, 50/60Hz. The fixtures utilize 300W COB LEDs with a color temperature of 3200K / 5600K, and a display index (CRI) of Ra95. The beam angle is adjustable between 10° -60°, and the control mode includes DMX 512, self-propelled mode, and master control mode, 50000hr burning hour reportwith DMX channels of 2/5 CH 11. Electronic dimming ranges from 0-100% linear dimming, with electric focusing and a strobe frequency of 1-25Hz. The heat dissipation method is air cooling, with a cast aluminum shell in black, designed to operate in environments ranging from -20° C to 40° C. The fixtures can connect multiple lights in series and must meet the latest CE Certification standards. Higher or improved specifications beyond those mentioned are welcome and considered within the specified make and standards, with any deviations from this standard not accepted. All products must come with an unconditional warranty covering a minimum of three years, and comprehensive onsite training must be provided to the end-user to ensure proper operation and maintenance of the installed equipment. (Make:- ETC, ADJ, Leksa lighting, Canara Lighting)
4
38500
154000
... More
The scope of work encompasses the supply, installation, laying, testing, commissioning, and programming of 300W Plano-Convex Spotlights for an auditorium stage, 50000hr burning hour reportensuring that the lighting fixtures not only enhance visibility but also create the desired effects for performing arts. The proposed product must be delivered fully calibrated and ready for immediate use, equipped with advanced technology to receive signals from the lighting console and execute commands with precision, as per the lighting program. The installation will be carried out in strict compliance with the architectural drawings and Engineer-in-Charge (EIC) instructions, ensuring proper design and optimal end results. Placement drawings of the fixtures must be approved before the commencement of work. The contractor is responsible for providing all necessary tools, machinery, manpower, staging, and consumables required for a comprehensive and seamless installation process, which must be executed by a skilled and experienced team adhering to the highest standards of quality, precision, and safety. The Theatre Spotlight features a 300W warm white LED with a plano-convex lens, offering a manual zoom for continuous variable angle adjustment from 14° to 38°, delivering a powerful light intensity of 18,000 lux at a distance of one meter. The light boasts a color temperature of 3,200 Kelvin, a CRI greater than 95, lamp life L70 50000 hours @55 deg cand a luminous flux of 1,570 lm. It is housed in black aluminum with 5pin DMX 512 control via XLR 3-pin connectors, providing flexibility in lighting design with its adjustable beam size, even light distribution, and energy-saving features. The fixture includes electronic dimming, a strobe function, and air-cooling for efficient heat dissipation. It operates within a voltage range of AC100V-240V, 50/60Hz, with a power consumption of 380W. The shell is made of cast aluminum, capable of functioning in temperatures from -20°C to 40°C. The fixtures must meet CE certification standards, and any deviation from the specified standards will not be accepted. Higher or improved specifications are welcome, provided they comply with the required make and standards. All products must come with an unconditional three-year warranty, and comprehensive onsite training must be provided to ensure the end-user can operate and maintain the equipment effectively. (Make:- ETC, ADJ, Leksa lighting, Canara Lighting)
4
41800
167200
... More
The scope of work encompasses the supply, installation, laying, testing, commissioning, and programming of 4 Eyes 200W LED Light fixtures designed to focus on the stage,50000hr burning hour report from the Front of House (FOH) and equal wash on stage from overhead and vertical side bars on stage, fixtures should be equipped with four advanced 50W COB 2-in-1 LED chips, offering a choice between a crisp cool white at 5600K and a warm, inviting 3200K white, ensuring flexibility in lighting design to suit various performance requirements. The dimming capability, ranging from 0 to 100% across 12 channels, allows precise control over light intensity, contributing to the creation of different moods and scenes on stage to provide uniform and diffused light, ensuring consistent, flicker-free illumination across the entire stage, effectively eliminating harsh shadows and minimizing glare to reduce eye strain for both performers and the audience installed fixture can connect multiple lights in series, and they must meet the latest CE and ROH certification standards, as well as incorporate DMX signal loop in and out through 3 or 5-pin XLR connectors, ensuring seamless integration with the lighting console, with an IP22 protection class and an impressive LED lifespan of over 100,000 hours with minimal maintenance. The beam angle of 15-25-45-60° allows for versatile lighting effects, fixtures are constructed from durable die-cast aluminum. The installation will be executed in strict accordance with the architectural drawings and Engineer-in-Charge (EIC) instructions, requiring placement drawings of fixtures before commencing work, All necessary tools, machinery, manpower, and consumables will be provided to ensure a comprehensive and seamless process, with the installation carried out by a skilled and experienced team adhering to the highest standards of quality, precision, and safety. The proposed products must be delivered fully calibrated and ready for immediate use, with an unconditional warranty covering a minimum of three years. Additionally, comprehensive onsite training will be provided to the end-user to ensure proper operation and maintenance of the installed equipment. Any deviation from the specified standards will not be accepted, but higher or improved specifications beyond those mentioned are welcome and will be considered, provided they align with the project’s requirements and standards. (Make:- ETC, ADJ, Leksa lighting, Canara Lighting)
16
11200
179200
... More
The scope of work encompasses the supply, installation, laying, testing, commissioning, with programming of RGBW 54 x 3W LEDPAR fixtures, specifically designed for installation on auditorium stages to maximize visibility and create the perfect stage atmosphere for performing arts, LEDPAR lights with high efficiency, extended lifespan, minimal maintenance, low heat generation, and absence of UV output, ensuring optimal performance with user-friendly operation. The fixtures must feature DMX signal compatibility with loop-in and loop-out functionality through 5-pin XLR connectors, supporting seamless integration with the lighting console to enable precise control of each fixture from a single command, as per the lighting program. The proposed LEDPAR fixtures, constructed from durable aluminum alloy, with an input power of 150W, operating on AC100-240V 50/60Hz. The lamps must consist of 54 x 3W LEDs with a color system of RGBW 4-in-1, offering control through 4/8 channel modes and multiple operational modes including DMX512, Master/Slave, Auto Run, and RDM. With an average lifespan exceeding 50,000 hours and the ability to operate in temperatures ranging from -20℃ to 40℃, these fixtures must meet or exceed the specified standards, including CE certification, and any deviation will not be accepted. The installation will adhere strictly to the Architectural Drawings and Engineer-in-Charge (EIC) instructions, requiring placement drawings of fixtures prior to commencing work. The process will involve all necessary tools, machinery, manpower, staging, and consumables, executed by a skilled and experienced team committed to the highest standards of quality, precision, and safety. The proposed products must be delivered fully calibrated and ready for immediate use, accompanied by comprehensive onsite training for the enduser to ensure proper operation and maintenance. All products must come with an unconditional warranty covering a minimum of three years, guaranteeing reliability and longevity in entertainment applications. (Make:- ETC, ADJ, Leksa lighting, Canara Lighting)
24
10600
254400
... More
The scope of work includes the supply, installation, laying, testing, commissioning, and programming of 200W COB W + WW LED PAR fixtures, specifically designed for fixed installation, COB lights are integral to achieving the desired lighting effects, maximizing visibility, and creating an immersive stage atmosphere. Each fixture must deliver high efficiency, an extended lifespan, minimal maintenance, low heat generation, and no UV output. The proposed fixtures must be fully calibrated upon delivery and compatible with advanced lighting consoles, responding seamlessly to DMX signals through 3 or 5-pin XLR connectors, with loop in and loop out capabilities. The lighting fixtures should support control modes including DMX512, master-slave, voice, and self-propelled, with dimming capabilities ranging from 0-100%, and color temperatures of 3200K or 5600K, or RGB for versatile stage effects. The fixtures must feature a die-cast aluminum chassis, beam angles between 15° and 60°, and a power rating of 250W.50000hr burning hour report They should operate reliably within a temperature range of -30°C to 40°C, with a working lifetime of up to 60,000 hours. The installation must be carried out by a skilled team, strictly adhering to the highest standards of quality, precision, and safety, as per the architectural drawings and Engineer-in-Charge (EIC) instructions. This includes the provision of all necessary tools, machinery, manpower, and consumables, ensuring a seamless process. The fixtures must comply with CE and RoHS certifications, and any deviations from these standards will not be accepted. All products must include an unconditional warranty covering a minimum of three years, and comprehensive onsite training must be provided to the end-user to ensure proper operation and maintenance. Detailed placement drawings of fixtures are required before work assignment to ensure the right design and end result. Any proposed product exceeding the specified requirements will be considered, while any that fall short will be rejected. (Make:- ETC, ADJ, Leksa lighting, Canara Lighting)
12
9800
117600
... More
The scope of work includes the supply, installation, laying, testing, commissioning, and programming of COB LED Blinder Light 400W with four COB lamps on the auditorium stage, ensuring comprehensive coverage and achieving desired lighting effects that maximize visibility. The installation will be meticulously executed following the Architectural Drawings and instructions provided by the Engineer-in-Charge (EIC), with a strong emphasis on quality, precision, and safety. The project demands a highly skilled and experienced team equipped with all necessary tools, machinery, manpower, staging, and consumables. The proposed COB LED Blinder Light is a highperformance stage luminaire, featuring four 100W COB LED bulbs totaling 400W, delivering adjustable luminous color between 3000K and 5600K. It offers a beam angle of 26° to 35°, ensuring broad and well-distributed illumination across the stage or audience area, crucial for focused lighting effects that enhance the performance atmosphere. The fixture also includes advanced dimming Capabilities with 0-100% linear electronic dimming control and an independent high-speed electronic strobe function, capable of flashing 1 to 20 times per second, adding dynamic visual elements to the stage. The COB LED Blinder Light supports multiple control modes, including DMX512, master-slave, and standalone operation, offering 2/6/8/12 DMX channels for versatile control. The robust aluminum housing ensures efficient operation within a temperature range of -20°C to 40°C, with a light source lifespan of over 50,000 hours, reducing the need for frequent replacements. The fixture is designed for energy efficiency, operating within an input voltage range of AC90-260V, 50/60Hz. Installation includes the latest advanced technology signals from the lighting console, ensuring that each lighting fixture responds accurately to a single command, enhancing the overall performance of the lighting system. The project also mandates CE certification and a minimum three-year unconditional warranty on all products, with comprehensive onsite training provided to ensure the proper operation and maintenance of the installed equipment. Any deviations from the specified standards or failure to meet the recommended specifications—such as DMX signal loop in and loop out,50000hr burning hour report and DMX in & out through 3 or 5-pin XLR connectors—will not be accepted. The product must be delivered fully calibrated and ready for immediate use, providing an all-in-one control solution that combines innovation with the latest technology advancements. Additionally, placement drawings of the fixtures must be approved before work assignment to ensure the correct design and end result.The entire lighting system is expected to meet the highest standards for enhancing entertainment Applications, with features like high efficiency, extended lifespan, minimal maintenance, low heat generation, and no UV output, making it a vital component in creating the perfect stage atmosphere for performing arts. (Make:- ETC, ADJ, Leksa lighting, Canara Lighting)
10
21500
215000
... More
Scope of work for this project encompasses the supply, installation, laying, testing, commissioning, and programming of 36 x 3W LED Wall Washer Cyclorama Pixel Bar fixtures on the auditorium stage. These lighting fixtures are integral to achieving the desired effects and maximizing visibility for theatrical productions and performances on stage. The proposed products must be delivered fully calibrated and ready for immediate use, These fixtures are designed for illumination on large backdrops, walls, and curtains, often concave and positioned at the back of the stage area to set the mood, cyclorama light serves a specific purpose and can be used incombination to achieve the desired visual effect for a performance. The installation must be executed in strict accordance with the architectural drawings and the instructions provided by the Engineer-in-Charge (EIC). This includes the provision of all necessary tools, machinery, manpower, staging, and any required consumables, ensuring a comprehensive and seamless process. The installation will be carried out by a skilled and experienced team, adhering to the highest standards of quality, precision, and safety throughout the project, with the responsibility for the right design and end result. A placement drawing of fixtures is required before assigning the work, LED Wall Washer Cyclorama Pixel Bar fixtures are known for their smooth wash and energy-saving capabilities, utilizing high-efficiency optical lenses that produce soft light, minimizing stray light, and eliminating glare for comfortable viewing. These products must meet the latest CE and ROHS certifications, lighting should feature an all-in-one control solution that integrates innovation and experience with the latest technological advancements. This includes DMX signals with loop in and loop out functionality, DMX in and out through 3 or 5-pin XLR connectors, and should offer benefits such as high efficiency, extended lifespan, minimal maintenance, low heat generation, and no UV output. The recommended specifications for the fixtures include a power supply of AC90V – 240V, frequency of 50/60Hz, power of 200W, dimming range of 0%-100% linear dimming, strobe functionality of 1-25 times/sec or random, an LED beam angle of 1.8°, 36 LED beams each with a power of 3W,DMX connector as 3Pin XLR, and channel modes of 8CH/40CH, 50000hr burning hour reportwith operation modes of DMX512/automatic/voice control. These fixtures can connect multiple lights in series, offering extensive lighting coverage and effects. The lighting fixtures must comply with the specified standards, and any deviations from these standards will not be accepted. Higher or improved specifications beyond those mentioned above are welcome, provided they align with the specified make and standards. All products must come with an unconditional warranty covering a minimum of three years. Additionally, comprehensive onsite training must be provided to the end-user to ensure properoperation and maintenance of the installed equipment. The installation process must follow strict adherence to quality, precision, safety, and compliance with the architectural drawings and EIC instructions, ensuring a successful and effective implementation of the stage lighting system (Make:- ETC, ADJ, Leksa lighting, Canara Lighting)
16
9200
147200
... More
The scope of work encompasses the supply, installation, laying, testing, commissioning, and programming of 8+8 LED Strobe Lights for creating dynamic stage effects that enhance visibility and atmosphere in an auditorium setting. The proposed LED fixtures, designed for performing arts, must deliver consistent, flicker-free, and uniform lighting across the stage, eliminating harsh shadows and reducing glare to ensure optimal visual comfort for both performers and the audience. Each light fixture is equipped with 4 advanced 50W COB 2-in-1 LED chips, offering a dual color temperature of 5600K cool white and 3200K warm white, with dimming capabilities ranging from 32bit 0~100% linear dimming across 12 channels, ensuring precise control over light intensity. The fixtures can connect multiple lights in series, supporting DMX512, self-propelled, master-slave, and voice control modes, with RDM functionality, ensuring user-friendly operation. Installation must be executed strictly according to the architectural drawings and under the supervision of the Engineer-in-Charge (EIC),with the contractor,responsible for accurate design and the final result, including placement drawings of fixtures prior to work commencement. The lights are to be delivered fully calibrated, ready for immediate use, and must comply with the latest CE and ROH Certification standards. The advanced lighting technology employed ensures high efficiency, minimal maintenance, low heat generation, and no UV output, contributing to the longevity and sustainability of the installation. Each fixture's durable chassis, IP20 rating, and wide-ranging strobe frequency (1-30Hz) guarantee reliability ,50000hr burning hour reportand robust performance under varying conditions. The installation process will require the provision of all necessary tools, machinery, manpower, and staging, carried out by a skilled and experienced team adhering to the highest standards of quality, precision, and safety. The tender must also include provisions for comprehensive onsite training to the end-user, covering proper operation and maintenance of the installed equipment. Any deviation from the specified standards will not be accepted, though higher or improved specifications are welcome. All products must come with an unconditional three-year warranty, ensuring long-term reliability and user satisfaction. (Make:- ETC, ADJ, Leksa lighting, Canara Lighting)
4
32200
128800
... More
The scope of work encompasses the supply, installation, laying, testing, commissioning, and programming of Stage Spot Light 300W aluminum zoom LED Profile Spot Light, designed to meet advanced lighting requirements for auditoriums. The proposed product must deliver superior photometric performance and uniform field coverage, operates on AC100-240V 50/60Hz input power, with a 300W 1pcs x COB LED lamp that offers an impressive lifespan exceeding 50,000 hours and low power consumption with CE & ROH Certification standards, adjustable intensity and color temperature, color system of W.W, high Color Rendering Index (CRI) of Ra≥90, which are crucial for highlighting performers and creating various moods and scenes on stage. The control system supports DMX512 with 1/2/5 control channel modes, including Master/Slave control, Sound Active, Auto Run,and a 3/5 pin XLR input/output for DMX signal connection. The fixture also provides a beam angle option of 19°/26°/36°/50°, optimized high-definition optical system, and a glass reflector that removes over 90% of infrared radiation and reflects over 95% of visible light,dimming frequency ranging from 500HZ to 25000HZ and a strobe rate of 1-25 times/sec, the lighting solution promises smooth, flicker-free dimming from 0-100% with operational temperatures ranging from -20°C to 40°C. The installation will be meticulously executed in line with Architectural Drawings and Engineer-inCharge (EIC instructions, and will include placement drawings of fixtures prior to commencement., project will be carried out by a skilled and experienced team, using all necessarytools,machinery, and consumables to achieve the highest standards of quality, precision, and safety. The lights, fully calibrated and ready for immediate use, will create the perfect stage atmosphere, and the lighting technology used must facilitate user-friendly operation with all-in-one control solutions. The fixtures are expected to deliver high efficiency, extended lifespan, minimal maintenance, low heat generation, and no UV output, enhancing any entertainment application, any deviations from these standards will not be accepted, and higher specifications are encouraged. Each product must come with an unconditional three-year warranty, along with comprehensive onsite training for proper operation and maintenance, ensuring a seamless and successful project execution.(Make:- ETC, ADJ, Leksa lighting, Canara Lighting)
2
38800
77600
... More
The scope of work encompasses the supply, installation, laying, testing, commissioning, and programming of a 330W 15R Follow Spot with stand and case, must be fully calibrated and ready for immediate use, Follow Spot is to focus on and highlight specific performers or objects on stage, ensuring visibility even in low-light or dynamic lighting conditions, and is particularly useful for tracking moving performers with emits a focused beam with a sharp edge and features manual focusing, iris control, LED strobe effect, installation will be executed in strict accordance with the Architectural Drawings and the instructions provided by the Engineer-in-Charge (EIC), with the contractor responsible for the right design and final result, including the provision of placement drawings before work commences. The installation process must include all necessary tools, machinery, manpower, staging, and consumables, and must be carried out by a skilled and experienced team, product comply with the latest CE & ROH certification standards incorporate highefficiency LED technology, offering benefits such as extended lifespan, 50000hr burning hour reportminimal maintenance, low heat generation, and no UV output, high-intensity air-cooling (double fan) system, and adjustable aperture size, with strobe capabilities of 1-7 times per second and color temperature correction options. The lighting fixtures should also feature an aluminum alloy housing with a high-temperature automatic cut-off protection device, meeting IP20 protection standards, Higher or improved specifications beyond those mentioned are welcome, provided they meet or exceed the specified make and standards. Any deviations from these standards will not be accepted. All products must come with an unconditional three-year warranty, and comprehensive onsite training must be provided to the end-user to ensure proper operation and maintenance of the installed equipment. (Make:- ETC, ADJ, Leksa lighting, Canara Lighting)
1
68200
68200
... More
The scope of work for this tender includes the supply, installation, laying, testing, commissioning, and programming of 19X15W RGBW LED AURA WASH ZOOM moving head stage lights for an auditorium, with all fixtures fully calibrated and ready for immediate use to create the perfect stage atmosphere. The proposed stage lighting must integrate seamlessly with the latest advanced technology, enabling precise control via a single command from the lighting console to each fixture. The fixtures are designed to enhance visibility, create different moods and scenes, and highlight performers on stage, with adjustable intensity and color temperature ranging from 2500-8000K. The installation will be executed in strict accordance with the architectural drawings and the instructions provided by the Engineer-inCharge (EIC), with a focus on achieving the right design and end result. The installation process must include the provision of all necessary tools, machinery, manpower, staging, and consumables, carried out by a skilled and experienced team adhering to the highest standards of quality, precision, and safety. The fixtures, which allow for the connection of multiple lights in series, must meet the latest CE & RoHS certification standards, featuring a DMX channel of 14/25CH, 19 pcs 15W 4-in-1 LEDs, a power supply of 600W (with active PFC), a zoom range of 2.8°-55°, smooth dimming from 0-100%, and a pan/tilt movement of 540°/270° (16bit). The DMX signal must include loop-in and loop-out functionality through 3 or 5-pin XLR connectors, ensuring user-friendly operation. The fixtures are appraised for their high efficiency, extended lifespan, minimal maintenance, low heat generation, no UV output, and an elegant design with a durable chassis. They offer all the benefits of modern lighting technology, enhancing any entertainment application with smooth, flicker-free dimming. Higher or improved specifications beyond those mentioned are welcome, provided they meet the specified standards and certifications. Any deviations will not be accepted. All products must come with an unconditional warranty covering a minimum of three years, and comprehensive onsite training must be provided to ensure the proper operation and maintenance of the installed equipment. (Make:- ETC, ADJ, Leksa lighting, Canara Lighting)
6
46200
277200
... More
The scope of work involves the supply, installation, laying, testing, commissioning, and programming of LED Projector Ellipsoidal Profile 200W lighting fixtures, fully calibrated and ready for immediate use to create the perfect stage atmosphere, fixtures should designed to connect multiple lights in series, meet the latest CE & ROHS Certification standards, and feature advanced control technology to receive signals from the lighting console and execute lighting programs on a single command, made from a durable aluminum alloy, features adjustable intensity and color temperature, ensuring the ability to create various moods and scenes on stage as required, Specifications include a product size of 640mm × 350mm × 250mm, operating at AC100-240V 50/60Hz with a power input of 260W, and utilizing a 200W COB LED lamp with an average lifespan of over 50,000 hours. The color system offers WW and options for 3200K/5600K/two-color/full-color (RGBW) with a color rendering index of Ra 90 to 97, ensuring vivid and accurate lighting with control system DMX512 compatible, supporting 1/2/5 channel modes, Master/Slave, and Auto Run having beam angle range of 19°/26°/36°/50°, work at temperatures from -20 to 40℃, and are rated IP20 for installation use. With benefits like high efficiency, extended lifespan, low maintenance, and no UV output, lights should provide comprehensive coverage and dynamic effects, critical for performance environments. Installation will be carried out in strict accordance with the Architectural Drawings and Engineer-in-Charge (EIC) instructions, requiring detailed placement drawings before commencing work, installation process will involve a skilled team equipped with all necessary tools, machinery, and consumables, ensuring adherence to the highest standards of quality, precision, and safety, any deviations from the specified standards will result in rejection of the fixtures include a minimum three-year unconditional warranty and comprehensive onsite training for the end-users to ensure proper operation and maintenance. Higher or improved specifications beyond those mentioned are welcome and will be considered within the specified make and standards.(Make:- ETC, ADJ, Leksa lighting, Canara Lighting)
2
34200
68400
... More
The scope of work includes the supply, installation, laying, testing, commissioning, and programming of a Water-Based Ultrasonic Low Fog Machine with a power capacity of 3000W, specifically designed for stage performances. This machine must utilize water and low fog fluid (not included) as the primary fuel, and be equipped with both DMX512 and remote control functionalities to ensure seamless integration with advanced stage lighting systems. The fog machine must arrive fully calibrated and ready for immediate use, capable of creating dense, low-lying fog that covers up to 70 square meters in just 3 minutes, thereby enhancing the stage atmosphere for performing arts. The installation will be executed in strict accordance with the provided architectural drawings and the Engineer-in-Charge (EIC) instructions, with placement drawings of fixtures required before work begins. The process must include the provision of all necessarytools,machinery,manpower,staging,and consumables, and must be carried out by a skilled, experienced team adhering to the highest standards of quality, precision, and safety. The fog machine must also feature a durable flight case for easy transport, fast heat-up times for quick operation, and the capability to connect multiple lights in series via 3 or 5-pin XLR connectors for DMX signals, ensuring acomprehensive and user-friendly control solution. The product should be CE certified, embodying the latest technology to offer benefits such as high efficiency, extended lifespan, minimal maintenance, low heat generation, and no UV output. It should also provide smooth, flicker-free dimming from 0-100% and feature an elegant design with a durable chassis. All products must come with an unconditional warranty covering a minimum of three years, and comprehensive onsite training must be provided to ensure proper operation and maintenance. Any deviations from these specifications or lower standards will not be accepted, and higher or improved specifications beyond those mentioned are welcome within the specified make and standards. (Make:- ETC, ADJ, Leksa lighting, Canara Lighting)
2
46000
92000
... More
The scope of work includes the supply, installation, laying, testing, commissioning, and programming of an advanced DMX Signal Amplifier: an 8-channel DMX Extender Split & Boost DMX512 Stage Light signal to effectively boost the DMX signal for optimal stage lighting performance. The system must accommodate 3 or 5-pin XLR connectors for each light bar and luminary, ensuring seamless signal transmission without interference or signal conflict. The DMX Splitter will play a critical role in achieving the desired lighting effects by amplifying signals from the lighting console to each fixture according to the programmed lighting design. The proposed product for the auditorium must be delivered fully calibrated and ready for immediate use, creating the perfect stage atmosphere. It should incorporate the latest technology to ensure that all signals are amplified accurately and efficiently from the console to each fixture on a single command. Installation must strictly adhere to the architectural drawings and the Engineer-in-Charge's (EIC) instructions, ensuring that the design and final results meet the highest standards of quality, precision, and safety. Prior to installation, a placement schematic drawing of fixtures must be provided for approval. The installation process will include all necessary tools, machinery, manpower, staging, and consumables, carried out by a skilled and experienced team. The DMX-4/8 way Splitter must be CE certified and designed to increase the number of data bus access devices, provide optical and electrical isolation between different branches of the stage lighting system, and enhance the safety and reliability of the digital lighting control system by protecting the DMX512 output console interface and isolating fault sites. The product must feature a luminous efficacy of 90 lm/w, a product weight of 3.5 kg, and an input power range of AC110V-240V. All equipment must include an unconditional warranty covering a minimum of three years, with comprehensive onsite training provided to the end-user to ensure proper operation and maintenance. Higher or improved specifications beyond those mentioned are welcomed, provided they meet the specified make and standards. Any deviations from these standards will not be accepted. (Make:- ETC, ADJ, Leksa lighting, Canara Lighting)
4
13500
54000
... More
The scope of work encompasses the supply, installation, laying, testing, commissioning, and programming of the Tiger Touch Titan Lighting Console - DMX Controller, including a 3 to 4 day onsite training session for end-users. The selected product must be delivered fully calibrated, meeting the latest advanced technology standards, ensuring immediate readiness for use to create the perfect stage atmosphere, controlled by a single command for optimal performance with built-in 15.6" widescreen touch display with high brightness, i5 CPU, 4GB memory, and 128GB SSD. It should support 12 physical DMX output ports with 6144 channel parameters, along with extensive connectivity options, including Art Net support for up to 32768 channel parameters, over 1000 light libraries, a powerful CMY palette function, and a robust UPS uninterruptible power supply. The installation will be executed in strict accordance with the Architectural Drawings and the Engineer-inCharge (EIC) instructions, with the contractor responsible for the correct design and final results, including the provision of schematic placement drawings of fixtures prior to work commencement. All necessary tools, machinery, manpower, and staging will be provided by the contractor, ensuring a comprehensive and seamless installation process conducted by a skilled and experienced team adhering to the highest standards of quality, precision, and safety. The system must also support external touch screens, have 10 programmable executor buttons, and convenient front-loading USB ports. Any specifications higher or improved beyond those mentioned are welcome, provided they meet the specified make and standards, and any deviations from this standard will not be accepted. All products must come with an unconditional warranty covering a minimum of three years, ensuring reliability and durability.(Make:- AVOLITE)
1
182000
182000
... More
The scope of work involves the supply, installation, laying, testing and commissioning of high-speed DMX data cables through ½” CONDUIT & PVC Corrugated Flexible Pipe designed for transmitting signals from the lighting console to each lighting fixture in the auditorium. The proposed DMX cables must feature 3 or 5 Pin Male XLR to 3 or 5 Pin Female XLR connectors, constructed with superior-quality materials for optimal signal integrity. The cables must be highly flexible, durable, and equipped with a water-resistant PVC jacket to withstand harsh environments, with heat-resistant inner liners ensuring signal integrity even under high temperatures. Installation will include termination with appropriate XLR connectors, covering all required points from the DMX Splitter to Light Bars, Side Ladders, and Floor Points, as per the architectural drawings and EIC instructions. The DMX data cable must be PVC insulated and multi-stranded to prevent signal loss during transmission, ensuring seamless operation of the lighting program. All work will be executed by a skilled and experienced team, adhering to the highest standards of quality, precision, and safety. The installation must be fully calibrated and ready for immediate use upon completion. Higher or improved specifications that meet or exceed these standards are encouraged, and deviations will not be accepted. wiring must come with an unconditional warranty of at least three years, and comprehensive onsite training must be provided to the end-user to ensure proper operation and maintenance of the installed equipment. (Make:- NUTRIK, SUNRISE, LOSEN)
113
1463
165319
... More
The scope of work includes the supply, installation, hanging, laying, and testing of lighting safety hooks over the light bar, ensuring full compliance with the hanging arrangement and architectural drawings as per the instructions provided by the Engineer-in-Charge (EIC). the lighting safety hook must incorporate an additional safety protection featuring a 3mm steel cable designed to meet permissible secondary safety components for high working load capacity, ensuring fall protection in accordance with the highest safety standards in entertainment rigging. The installation must be executed by a skilled and experienced team, utilizing all necessary tools, machinery, manpower, staging, and required consumables, to achieve a comprehensive and seamless installation process. The product must be delivered and ready for immediate use, with installation adhering strictly to quality, precision, and safety protocols. the lighting safety hook with required lengths, any deviation from these specifications will not be accepted, and higher or improved specifications are encouraged within the specified make and standards.
113
178
20170.5
... More
The scope of work includes the supply, hanging, installation, laying, testing, and programming of high-quality clamps specifically designed to securely hold energy-efficient stage lighting on light bars within an auditorium. The proposed clamps must be made of strong, durable metal, such as steel or aluminum alloy, with a protective strip to safeguard the truss or bar from damage, clamps should be compatible with professional lighting fixtures and capable of achieving the required angles for optimal lighting effects. Installation will be carried out in strict adherence to the provided architectural drawings and the Engineer-in-Charge (EIC)'s instructions, utilizing all necessary tools, machinery, and manpower to ensure a seamless and safe process. The team responsible for installation must be skilled and experienced, ensuring that the highest standards of quality, precision, and safety are maintained throughout the project, additional protective measures to prevent any accidental dislodgement, clamps must be delivered ready for immediate use, any deviations from the specified standards will not be accepted, although higher or improved specifications are encouraged and will be considered within the project's requirements.
113
165
18645
... More
The scope of work includes the supply, installation, laying, testing, commissioning and programming of a reliable electrical power system designed to handle high current loads, ensuring a stable power supply for demanding stage equipment, such as high-powered lighting rigs, in compliance with European safety standards. The system must reduce the risk of overloading while effectively protecting against short circuits, overloads, and other electrical hazards. Each lighting fixture must receive a dedicated and properly calibrated power supply, enabling precise control according to the lighting program on a single command for performing arts. The installation will be executed in strict accordance with the architectural drawings and the Engineer-in-Charge (EIC) instructions, utilizing all necessary tools, machinery, manpower, staging, and consumables to ensure a comprehensive and seamless process. A skilled and experienced team must carry out the work, adhering to the highest standards of quality, precision, and safety. The electrical system shall include 2.5mm electrical cables laying with through 2” CONDUIT & PVC Corrugated Flexible Pipe, conforming to makes such as Finolex, Anchor, Havells, Polycab, or RR Cables, with PVC insulated 3 core 2.5 sq mm FRLS cables connecting each light bar to an MCB box over the stage. This box must be connected to the main electrical panel, with each lighting bar perfectly fitted with built-in power designed to cover the entire stage. Starting from the supplied MCB Box/Panel, equipped with 10A SP MCBs or higher as per the lighting requirement, the power shall be delivered to the lighting bars or stage points, terminating at a junction box with 2 x 16 A Industrial SCHUKO sockets required point on each light bar, all clearly marked and numbered using 2.5 sq mm PVC ferrules and self-locking cable markers. The proposed products must meet or exceed the specified standards and must be delivered fully calibrated and ready for immediate use. Any deviations from these standards will not be accepted. The installation must include an unconditional warranty covering a minimum of three years, and comprehensive onsite training must be provided to ensure the proper operation and maintenance of the installed equipment. (Make:- Finolex, Anchor, Havells, Polycab, RR Cables)
113
2844
321372
... More
SITC of 13600 ISO lumens Single chip DLP laser phosphor projector with Resolution: 1,920 x 1,200 (WUXGA) or better, Contrast ratio: 1,200:1 or better, Light source lifetime: Up to 18,000hrs, Aspect ratio: 16:10, Sealed DLP™ core, Color correction, constant light output: Required, Active stereoscopic 3D, Optical lens shift: Vertical up to 100%, depending on lens, Horizontal up to 30%, depending on lens, Motorized zoom and focus, Motorized lens shift, Inputs: HDMI: 2 Nos, DVI-D: 1 Nos, HDBaseT: 1 Nos, 3D SYNC In: 1 Nos, 3G-SDI: 1 Nos, Input resolutions: Up to 4K @60Hz, Refresh rates: 24Hz to 60Hz for WUXGA. Control: IR, RS232, RJ45, 3.5mm. Lens type: 1.22-1.53:1. Certification: CE, FCC Class A, cTUVUS, CCC, EAC, KCC, RCM, BIS, BSMI.The price includes applicable lens as per the final design .
Approved Makes: Chirstie, Barco(G62‑W14)
1
1600000
1600000
... More
SITC of AV Control processor for controlling audio, video, sensors, and security systems as per site requirement.Supplied controller should be able to run two different programs to control two rooms simultaneously (Additional Hardware can be added to meet the requirement) Should have minimum 2 GB RAM, Flash 8 GB & External Storage Supports up to 1 TB to load files and processing. Should have minimum 1x Bidirectional RS-232/422/485 port, 2x Bidirectional RS-232 port, 8xIR/1-way serial, 8x relay supporting 1A, 30VAC/VDC, and 8x digital IO ports. Should support BACnet communication protocol from day one, for providing direct interface to third‑party building management systems over Ethernet, simplifying integration with HVAC, security, and other systems. (Additonal hardware can be added to meet the requirement). Control processor & Touch Control interface should be from same OEM, and must not require any internet connectivity for configuration, programming and running. Should have ethenet port supporting 1000 Mbps, industry-standard TCP/IP, UDP/IP, SFTP, DHCP, SSL, FIPS 140-2 compliant encryption, SNMP, IPv4, IPv6 & SMTP. Should support industry standard minimum-security features and protocols using Active Directory® credential management, 802.1X authentication, TLS, SSH, and HTTPS. Should comply to CE, UL, FCC & BIS.
Approved Makes: Crestron, Extron, Kramer
1
233000
233000
... More
SITC of 10 in. diagonal Table Touch Screen for completely customizable controlling. Should have dedicated buttons for Power, Home, Lights, Up, Down, and Microphone which can be programmed as per requirement Should be able to communicate to network over 1x LAN as well as Wi-Fi Should have Mic & speaker to support voice recognition, voice commands can be issued to quickly turn system On/off, Select source, choose a lighting scene, lower the shades. (Additional Hardware can be added to meet the requirement) Projected capacitive multitouch capable, TFT active-matrix color LCD 1920x1200pixels resolution 16:9/16:10 Aspect ratio. minimum 400 nits (cd/m2) brightness Contrast 1000:1 Color Depth 24 bit, 16.7M colors Viewing Angle +80° horizontal, +80° vertical 2 GB RAM, Storage 16 GB IEEE 802.11a/b/g/n/ac protocols at 2.4, 5 Ghz bands TCP/IP, UDP/IP, SFTP, DHCP, SSL, TLS, SSH, IEEE 802.1X, SNMP, IPv4, IPv6, Active Directory® service authentication, HTTPS 128-bit WEP, WPA and WPA2-PSK with TKIP and AES.Minimum 50feet H.265, H.264, and MJPEG formats on screen for streaming IP cameras or stream on the network
web based configuration Active Directory® service authentication, 802.1X network access control, TLS, SNMP, and HTTPS. Supplied with internal/external proximity sensor to wakeup screen when user approaches and trigger action based on custom programming. Shipped with Software / Application which helps IT resource / Admin for troubleshooting device remotely, updating firmware/software, managing device settings, and generating reports based on device usage data as a part of standard warranty and AMC. Included CE, FCC & BIS. Approved Makes: Crestron, Extron, Kramer
1
287000
287000
... More
SITC of AV over IP Encoder that transports 4096x2160 @60 4:2:0, deep color video support video over standard ethernet switch. Having video 1 x HDMI Input, Output 1 x RJ45 output. Should support Digital audio Formats like Dolby Digital®, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS ES, DTS 96/24, DTS HD High Res, LPCM up to 8 channels. Audio out on 1x stereo line-level audio output. Should have ethernet port Ethernet supporting TCP/IP, UDP/IP, DHCP, SSL, TLS, SSH, SFTP, IPv4 and IPv6, HTTPS. Onboard control ports of minimum 1 x IR, 1 RS-232 for controlling third party devices, without the need of running control cable from controller. Should suppot AES67 Audio Embedding and De-embedding. Enterprise-grade security including 802.1X, TLS, and AES‑128 content encryption. HDCP 2.3 compliant. JITC Certified product. Should comply to CE, IC, FCC.
Approved Makes: Crestron, Extron, Kramer
1
75000
75000
... More
SITC of AV over IP Decoder that transports 4096x2160 @60 4:2:0 deep color video support video over standard ethernet switch. Having video 1 x HDMI scaled output with fully adjustable zoom capability and bezel compensation for video wall configurations and display types, Input 1 x RJ45. Should support Digital audio Formats like Dolby Digital®, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS ES, DTS 96/24, DTS HD High Res, LPCM up to 8 channels.Audio out on 1x stereo line-level audio output. Should have ethernet port Ethernet supporting TCP/IP, UDP/IP, DHCP, SSL, TLS, SSH, SFTP, IPv4 and IPv6, HTTPS. Onboard control ports of minimum 1 x IR, 1 RS-232 for controlling third party devices, without the need of running control cable from controller. Should suppot AES67 Audio Embedding and De-embedding. Enterprise-grade security including 802.1X, TLS, and AES‑128 content encryption. HDCP 2.3 compliant. JITC Certified product. Should comply to CE, IC, FCC.
Approved Makes: Crestron, Extron, Kramer
1
91000
91000
... More
Work will be executed as per the Architectural Drawings & instructions of Engineer-in-charge (EIC) including all tools, tackles, machineries, manpower, staging, any consumables, etc. complete
The complete automatically motorized Stage curtain system with additional modified Gearbox fitted with sealed bearings self-lubricating centre split overlapped curtains both sides opening fully automatic Stage Curtain fixing steel rails track made out of 450 GSM made out of, double gathering Velvet, Molfin, Mokel or Hitech Fabric Curtain cloth drapery horizontal sliding arrangement complete with fixing rails, brackets and motorized operation complete with runners, master runners, pullies, 3mm steel wire rope, 1 HP Motor (Crompton or Godrej) 2 Nos Air Breaker Contractors (L&T/SIEMENS), 2nos. Micro Switches for auto stop, 3 nos push buttons for forward. All rollers are sliding with roller clamp, The curtain should be half of full width operated from control panel with control switches. Provision is for fully automatic operation only.
Height and length to be decided as per final design. (Make:- Stage Works, Canara Lighting, leksa Lighting, Modern Stage)
FABRIC SPECIFICATION : 450 GSM VELVET, Shade and fabric approved by Engineer in Charge or enduser
Fabric Make : Response Nexgen Or Pro-Acoustics
1
231250
231250
... More
Work will be executed as per the Architectural Drawings & instructions of Engineer-in-charge (EIC) including all tools, tackles, machineries, manpower, staging, any consumables, etc. complete
The complete automatically motorized Stage curtain system with additional modified Gearbox fitted with sealed bearings self-lubricating centre split overlapped curtains both sides opening fully automatic Stage Curtain fixing steel rails track made out of 450 GSM made out of, double gathering Velvet, Molfin, Mokel or Hitech Fabric Curtain cloth drapery horizontal sliding arrangement complete with fixing rails, brackets and motorized operation complete with runners, master runners, pullies, 3mm steel wire rope, 1 HP Motor (Crompton or Godrej) 2 Nos Air Breaker Contractors (L&T/SIEMENS), 2nos. Micro Switches for auto stop, 3 nos push buttons for forward. All rollers are sliding with roller clamp, The curtain should be half of full width operated from control panel with control switches. Provision is for fully automatic operation only.
Height and length to be decided as per final design. (Make:- Stage Works, Canara Lighting, leksa Lighting, Modern Stage)
FABRIC SPECIFICATION : 450 GSM VELVET, Shade and fabric approved by Engineer in Charge or enduser
Fabric Make : Response Nexgen Or Pro-Acoustics
1
231250
231250
... More
Work will be executed as per the Architectural Drawings & instructions of Engineer-in-charge (EIC) including all tools, tackles, machineries, manpower, staging, any consumables, etc. complete
The complete automatically motorized Stage curtain system with additional modified Gearbox fitted with sealed bearings self-lubricating centre split overlapped curtains both sides opening fully automatic Stage Curtain fixing steel rails track made out of 450 GSM made out of, double gathering Velvet, Molfin, Mokel or Hitech Fabric Curtain cloth drapery horizontal sliding arrangement complete with fixing rails, brackets and motorized operation complete with runners, master runners, pullies, 3mm steel wire rope, 1 HP Motor (Crompton or Godrej) 2 Nos Air Breaker Contractors (L&T/SIEMENS), 2nos. Micro Switches for auto stop, 3 nos push buttons for forward. All rollers are sliding with roller clamp, The curtain should be half of full width operated from control panel with control switches. Provision is for fully automatic operation only.
Height and length to be decided as per final design. (Make:- Stage Works, Canara Lighting, leksa Lighting, Modern Stage)
FABRIC SPECIFICATION : 450 GSM VELVET, Shade and fabric approved by Engineer in Charge or enduser
Fabric Make :Response Nexgen Or Pro-Acoustics
1
231250
231250
... More
As per Architectural Drawings, Work will be executed as per the Architectural Drawings & instructions of Engineer-in-charge (EIC) including all tools, tackles, machineries, manpower, staging, any consumables, etc. complete SITC of frills
made out of, 450 GSM double gathering glazed fire retardant Velvet, Molfin, Mokel or Hitech Fabric; to be installed above the stage on 28mm dia GI pipe adjustable at position according to stage positioning plan; Cloth material of desired shade with Stitching. (Make:- Stage Works, Canara Lighting, leksa Lighting, Modern Stage)
FABRIC SPECIFICATION : 450 GSM VELVET, Shade and fabric approved by Engineer in Charge or enduser
Fabric Make : Response Nexgen Or Pro-Acoustics
3
40500
121500
... More
As per Architectural Drawings, Work will be executed as per the Architectural Drawings & instructions of Engineer-in-charge (EIC) including all tools, tackles, machineries, manpower, staging, any consumables, etc. completeSITC of MS, Wing frame made out of 25X25mm or higher size made of MS square pipe with 2mm in thickness undergone through various chemical treatment to keep them rust free and duly powder coated in black matt texture finish with Below Specifications: Wing Frame Size 7.7 x 1.5 Mtr ,1.5meter wing track of 48x84mm with grid mount brackets made of 40X50X40mm C track, Pivotable 4 wheeled suspension trolley, Adjustable floor locking screw jacks with rubber grips, Inverted 4-Wheeler Trolley with Flexi Adaptor Clamp, Heavy duty wing track to be laid for minimum length of 1.5mtr, along the width of the stage. 360° Rotatable and can move in unidirectional All the materials under gone through 7 tank process with various chemical treatment to keep them rust free with and duly epoxy polyester powder coated in black matt texture finish. including connections and making good the damages caused complete as required and as per Dierction of Engineer-In-Charge. Providing and fixing of cloth wings made out of black glazed 450 GSM fire retardant Velvet, Molfin, Mokel or Hitech fabric fixed on 32mm Pivoted Rotatable Bar Fixed with thick commercial plywood fixed on one side of Frame work with sliding assembly on top supported from ecisting structure & wheels on bottom for free movement. (Make:- Stage Works, Canara Lighting, leksa Lighting, Modern Stage)
FABRIC SPECIFICATION : 450 GSM VELVET, Shade and fabric approved by Engineer in Charge or enduser
Fabric Make : Response Nexgen Or Pro-Acoustics
4
54000
216000
... More
Providing & Fixing of Stage Cyclorama Screen which offer a versatile backdrop that can be customized with lighting and projections to create a theme, Work will be executed as per the Architectural Drawings & instructions of Engineer-in-charge (EIC) including all tools, tackles, machineries, manpower, staging, any consumables, etc. complete Cyclorama is designed to provide a smooth and continuous surface that enhances lighting and visual effects transformed with lighting, projections, and special effects., creating a versatile background for various stage settings for achieving professional and aesthetically pleasing stage visuals with custom sizes to fit any stage setup by lighting the screen in different colours and patterns, create immersive experiences for the audience, with durable fabric that offers excellent opacity and light diffusion onsite fabrication of Mild Steel Pipe Frame Made Out Of 25 To 32 Mm Die Fix Frame as per shared drawings Overlapped With 1.8 Power High Gain fabric seamless joint on every 72” Matt White Projector Screen Onsite fabricated Triangle Cyclorama Frama As per Architectural Drawings, Work will be executed as per the instructions of Engineer-in-charge (EIC) including all tools, tackles, machineries, manpower, staging, any consumables, etc. complete triangular truss onsite manufactured with a structural MS Frame as per detailed drawings and fixing details from floor, rear wall and ceiling with fasteners to gain the extreme strength that contains a high amount of manganese in order to control grain structure, resulting in a stronger design. The structure is artificially aged, and provides excellent corrosion resistance. Although the surface finish is not as smooth as similar truss, Triangle frame is favored in the entertainment industry for its superior strength and durability which provides a safer stage and working environment to match visibility angles and enhancement of Stage effect lighting overlapped with Grandview high-gain matt white screen duly stretched on large tubular MS pipe frame made out of 25 to 32 mm die fix frame for projection screen: Cyclorama Screen that is manufactured using quality assured raw components and advanced technologies. Hi-Gain Cyclorama screen has been installed for Slide / film projection in a multipurpose auditorium, besides using it as color wash or for pattern projection for stage performance. Cyclorama lights are directed to fall on this screen to color wash it from top as well as Moving Heads installed on the First Intelligent Bar provide infinite pattern and depth to the screen. High-gain front projection screen with four-inch black masking studs on all sides. HD fabric Material is designed for DLP and LCD Cinema Projectors. This surface is the best choice when using a low contrast ratio projector with a high-definition video source. High Contrast is perfect for use in HD Cinema applications Screen Surface is safely washable with mild soap and water.
MS STRUCTURE IN : TATA, JINDAL,KAMDHENU & APOLLO SCREEN MAKE : PRIMA, CINEMA WORKS or LIBERTY
1
346800
346800
... More
As per Architectural Drawings, Work will be executed as per the Architectural Drawings & instructions of Engineer-in-charge (EIC) including all tools, tackles, machineries, manpower, staging, any consumables, etc. complete:SITC of data signal cabling for remote curtain Using 4-core PVC insulated multistranded cable to transmit Signal through curtain drives . high speed data cable designed for EIA485 ; lowcapacitance, twisted pair shielded ; FHDPE insulation, for interlinking splitter to Control Room with required connectors (1 main +1 backup)(Make:- Finolex, Anchor, Havells, Polycab, RR Cables)
3
7793
23381.25
... More
SITC of Fixed Stage Light Bar, length 10 Mtrs made using MS 40NB Class ‘B’ Pipe dual barrel construction arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with Below Specifications: Dual barrel Light bar equipped with 40x75x40 Cable trenching arrangement with lid for better aesthetic look and cable safety. Dual barrel pipe construction welded with 75x6mm MS Flat in every 1 Mtr for better strength ,With Suitable Suspenders to fix the light bar with every 2mtr pitch. including connections and making good the damages caused complete as required and as per Dierction of Engineer-In-Charge.
3
85250
255750
... More
CE Certified Motorised FOH Light bar Suitable Length 13Mtrs or more as per design , with Suitable Capacity 3 Phase AC Motor with DC Brake. & Gear box with black epoxy polyester powder coated with following specifications - • 40NB, 48mm OD dual barrel dual construction arrangement with 75x6mm MS Flat in every 2 m and with 40x75 Cable trunking with lid. MS fabricated cable retractor made up of CRCA MS Sheet 20SWG 1300mm each length with hinge rod • Specially designed compact 80:1 Worm reduction gear box, B5 Flange. Double Cam type Upper and lower limit controller 5mm, 6x19 GI wire rope preformed for lifting the Light bar , Pile winding type winch with MS circular Plates for rope winding , Safe Working Load 180 kg including connections and making good the damages caused complete as required and as per Dierction of Engineer-In-Charge.
1
115000
115000
... More
The scope of work entails the supply, installation, laying, testing and commissioning of a Modular Wired Fixed Heavy-Duty Stage Lighting Bar System for an auditorium stage & Front of House Area with submission of detailed drawings, ensuring optimal lighting effects and focus across the performance area, lighting bar system, constructed from high-quality Mild Steel (MS) tubing of 2"x 4" x 16-gauge diameter, features a full-length 20ft pipe interconnected with 2" square and round pipes compatible with C-Clamps Safety Hang trussing, ensuring structural integrity, bars are modular, allowing them to be linked side by side to form a single, rigid structure, and can be suspended using existing grid system. The MS fabrication will utilize materials from approved manufacturers such as TATA, JINDAL, KAMDHENU, and APOLLO, treated with rust prevention measures including wire brushing, sanding, zinc chromate red oxide primer, and a final coat of black quick-drying enamel paint for a sleek, professional finish, installation includes an integrated power system using 2.5 sqmm copper armoured cables connected to 16A Industrial SCHUKO sockets for European-standard safe power supply and outlets placements should be built into the bars with DMX signal outlets and connectors are incorporated installation will be executed by a skilled and experienced team in strict accordance with the Architectural Drawings and the Engineer-in-Charge's (EIC) instructions, ensuring adherence to the highest standards of quality, precision, and safety. The lighting bars, designed for flexibility and extensive coverage, will be hung over the stage on a safety grid, allowing for the optimal placement of lighting fixtures to achieve the desired effects and atmosphere. The final installation must include comprehensive onsite training for the end-user to ensure proper operation and maintenance, with all products covered by an unconditional warranty of at least three years. Specifications exceeding the mentioned standards are encouraged, provided they align with the specified makes and standards, with no deviations accepted.
5
56000
280000
... More
The scope of work encompasses the supply, installation, laying, testing and commissioning of a modular wired fixed heavy-duty vertical stage lighting bar ladder system for the stage. This system is to be installed on both sides of the stage, ensuring optimal lighting effects and focus across the performance area. The lighting bars, constructed from 2" x 2" x 16-gauge mild steel tubes with a 6 ft length, will be interconnected with trussing using adequate clamps and securely hung from the existing grid systems for maximum flexibility. The installation must adhere to the design specifications and be carried out by a skilled team, ensuring strict compliance with the Architectural Drawings and instructions from the Engineer-in-Charge (EIC). The mild steel bars shall undergo a thorough rust-free treatment, including wire brushing or sanding to prepare the surface, followed by two coats of zinc chromate red oxide primer for anti-corrosion protection. The bars will be finished with a sleek, black, quick-drying enamel paint, both inside and outside, to complement the stage environment. The bars will accommodate built-in power with 2.5mm cables connected to 16A industrial SCHUKO sockets, along with DMX signal outlets, ensuring seamless integration with lighting fixtures for precise control and effects. MS material must meet the approved makes (TATA, JINDAL, KAMDHENU, APOLLO) and adhere to the highest standards of quality, precision, and safety. Higher or improved specifications beyond those mentioned are encouraged, provided they meet the specified make and standards, with no deviations accepted. The delivered product must come fully calibrated, ready for immediate use, and include an unconditional three-year warranty. Comprehensive onsite training must be provided to the end-user to ensure proper operation and maintenance of the installed equipment, ensuring the system's long-term effectiveness and reliability. The scope of this specification covers the MS (Mild Steel) fabrication work only. The cost associated with wiring and connectors is not included in this specification.
6
8200
49200
... More
SOUND SYSTEM
-
-
-
... More
The scope involves the Supply, installation, laying, testing, commissioning, and programming of the Two-Way Line Array Loudspeaker Cluster System consists of multiple individual speakers arranged in a linear formation designed to deliver high – quality sound coverage & listening experience throughout the space for a more natural and immersive listening experience. The product must be delivered fully calibrated and ready for immediate use. Installation will be executed in strict accordance with the Architectural Drawings and the instructions provided by the Engineer-in-Charge (EIC) the installation must be carried out by a skilled and experienced team, adhering to the highest standards of quality, precision, and safety throughout the project.The agency should submit sound design and analysis of auditorium inorder to achieve N. SITC of Front-of- House left and right clusters with a 2X 8" LF driver or better and with symmetrical response on both left and right side of the array, 2 or 3 Way array loudspeaker system; with Individual element free field Frequency Range (-10dB) of 65Hz to 19kHz or better & Continuous Power Handling of each element =260W AES,or higher. The Loudspeaker array element shall have a max SPL 121.5dB continuous, 127.5dB peak @ 1m Sensitivity should 103.5dB @ 1W/1m. It should have Horizontal near dispersion pattern of100º or better, vertical dispersion of each element of the array shall be 10 degrees in complete as per the direction of engineer incharge .The final make ,tds,drawing ,OEM Authorization,design will be submitted for approval of SE Electrical and CE Building . Make: L-Acoustics, Martin Audio, Pulz Audio (Quartet QM1)
16
68935
1102960
... More
The scope involves the Supply, installation, and hanging of a Line Array Loudspeaker Cluster System consists of multiple individual speakers arranged in a linear formation designed for optimal sound coverage, ensuring that the entire audience, from front row to rear seating, receives clear audio. The project includes the onsite fabrication and precise positioning of Two-Way Line Array clusters, utilizing advanced coverage mapping to achieve the correct angles and position for effective sound distribution. The setup should incorporate the necessary hardware to mount the Front of House (FOH) Line Array Loudspeaker Cluster, mounted in front of the proscenium arch using the required hardware, without obstructing the audience's view involve specialized mounts, rigging hardware, and a Suspension Frame Arrangement, as recommended by the OEM, to ensure the safety and optimal placement of the speakers. The hanging arrangement will be designed with a gearbox for easy vertical movement of the cluster in the future, if repairs or adjustments are needed. The lifting mechanism will employ a winch with recommended galvanized steel wire rope slings for added safety, considering the additional overhead load, An overhead fabricated frame should also be included, designed to facilitate the smooth and secure movement of the Line Array Cluster using a winch mechanism, Speaker Mount & Riging Hardware For Front Speaker: Speaker mounts and rigging hardware are used to ensure the optimal placement of an audio speaker specifications considered within the specified make and standards, any deviations from this standard will not be accepted, All products must come with an unconditional warranty covering a minimum of three years maintenance of the installed equipment in complete as per the direction of engineer incharge .The final make ,tds,drawing ,OEM Authorization,design will be submitted for approval of SE Electrical and CE Building ..(Make:- L- Ascoustics, Bose,Pulz Audio
2
72250
144500
... More
SITC of an advanced sub bass system ready to fly or ground stacked,as an array. Frequency Response 45Hz to 200Hz Power Rating 1000W AES, 4000W PeakSensitivity 95.5dB @ 1W/1m Maximum SPL 125dB continuous, 131dB peak @ 1m Nominal Impedance 8Ω Low Frequency Driver 1 X 15″ (380 mm) weather resistant long excursion woofer Finish Black impact resistant structured coating Connector Speakon with Parallel out Enclosure 16 mm Birch plywood Band pass enclosure in complete as per the direction of engineer incharge .The final make ,tds,drawing ,OEM Authorization,design will be submitted for approval of SE Electrical and CE Building . Make: L-Acoustics, Martin Audio, Pulz Audio (SUB 15LA)
4
131325
525300
... More
SITC of a Double 18" subwoofer. The louspeaker shall meet the following performance criteria: Frequency Range (-10 dB) of 35Hz to 200Hz. It should have an ground stack position Sensitivity of = 101dB @ 1W/1m or more delivering a ground position Max. Calculated SPL(peak) of =140 dB; Nominal impedance of 4ohm or higher and continuous 2000W AES, 8000W peak or more. High temperature stabilized 4” copper voice coil The loudspeaker system shall be comprised of a 16 mm Birch plywood in complete as per the direction of engineer incharge .The final make ,tds,drawing ,OEM Authorization,design will be submitted for approval of SE Electrical and CE Building . Make: L-Acoustics, Martin Audio, Pulz Audio (SIC SUB218)
2
155550
311100
... More
SITC of Front Fill Speakers must have two-way 10″ -inch or better high SPL surface mount loudspeaker. Frequency Range (-10 dB) of 60Hz to 20kHz or better; Nominal Dispersion :90° conical or better; Power handling of 150W AES, 600W peak or more; Sensitivity :96.7dB @ 1W/1m or better and the 118dB continuous, 124dB peak @ 1m or more with a Nominal impedence of 8 ohmsin complete as per the direction of engineer incharge .The final make ,tds,drawing ,OEM Authorization,design will be submitted for approval of SE Electrical and CE Building . Make: L-Acoustics, Martin Audio, Pulz Audio (CX10 with Bracket)
3
46750
140250
... More
SITC of Delay Speakers (Balcony & Below Balcony)must have two-way 8″ -inch or better high SPL surface mount loudspeaker. Frequency Range (-10 dB) of 70Hz to 20kHz or better; Nominal Dispersion :90° conical or better; Power handling of 120W AES, 480W peak or more; Sensitivity :93.8dB @ 1W/1m or better and the 114.5dB continuous, 120.5dB peak @ 1m or more with a Nominal impedence of 8 ohmsin complete as per the direction of engineer incharge .The final make ,tds,drawing ,OEM Authorization,design will be submitted for approval of SE Electrical and CE Building . Make: L-Acoustics, Martin Audio, Pulz Audio (CX8 with Bracket)
6
32300
193800
... More
SITC of Stage Monitors Speakers must have Frequency Response 55Hz to 20kHz Power Rating 250W AES, 1000W peak Sensitivity 98.6dB @ 1W/1m Maximum SPL (Continuous) 122.5dB at 1m Nominal Impedance 8Ω, Dispersion 60° conical Transducers 12” Coaxial LF driver 1″ (coaxially mounted HF compression driver Enclosure 16mm Birch plywood vented enclosure in complete as per the direction of engineer incharge .The final make ,tds,drawing ,OEM Authorization,design will be submitted for approval of SE Electrical and CE Building . Make: L-Acoustics, Martin Audio, Pulz Audio ( X12)
4
40800
163200
... More
SITC of Digital Signal Prosessor 16-In, 16-Out Digital Signal Processor. Input Impedance Balanced 5.7KΩ, Output Impedance Balanced 150Ω PC Port 1 USB (front panel), RS485, RS232, RJ45, GPIO (phoenix connector- back panel) CMRR 55dBu at 1kHz
Input Range ≤+14dBu Input Signal Line/Mic/Internal test signal generator Phantom Power 48V per channel
Frequency Response 20Hz-20kHz(+/-0.5dB) Line, 20Hz-20kHz(+/-1.5dB) Mic S/N Ratio 105dB Line, 95dB Mic
THD 0.01% Output=0dBu/1kHz. Crosstalk of Channels 83dB(1kHz)
in complete as per the direction of engineer incharge .The final make ,tds,drawing ,OEM Authorization,design will be submitted for approval of SE Electrical and CE Building . Make: L-Acoustics, Martin Audio, Pulz Audio (DSS1616)
1
141950
141950
... More
SITC of 2 Channel Power Amplifiers Each Amplifier Should Deliver Minimum Power 800 Watts Per Channel @ 8 Ohms, 1300 Watts Per Channel @ 4 Ohms And 2500 Watts In Bridge Mode @ 8 Ohms. Frequency Response Should Be 20hz To 20khz +- 0.5 Db. Damping Factor Greater Than Or Equal To 300 And Minimum Signal To Noise Ratio Of 110db. Cooling Air flow from front to rear Protection Fuseless short circuit protection, ultrasonic and RF protection, thermal protection Load Protection Turn on delay, DC fault protection, Ultrasonic limiting Built in DSP and Network connectivity is Optional Bidder Shall Submitted OEM Authorizationalong with technical bid Make: L-Acoustics, Martin Audio, Pulz Audio (AD21300)
5
96900
484500
... More
SITC of No. of Channels 6Output Power (per channel) 6 x 200 Watts @ 8Ω 6 x 300 Watts @ 4Ω Frequency Response 30Hz –20kHz, +0.2dB Total Harmonic Distortion + Noise 0.01% Intermodulation Distortion 0.02% Signal to Noise Ratio -95dB Damping factor 100 @ 8Ω Crosstalk -90dB, Slew Rate 50V/us Input Sensitivity 1.3V RMS (+5dBu) Input Impedance 20kΩ, balanced, Voltage Gain 29dB Bandwith 100kHz Cooling Forced air, front to side.
in complete as per the direction of engineer incharge .The final make ,tds,drawing ,OEM Authorization,design will be submitted for approval of SE Electrical and CE Building . Make: L-Acoustics, Martin Audio, Pulz Audio (PZ6300 6CH)
1
85208
85208.25
... More
SITC of LCR 3-Way Cinema Screen Speaker System with Frequency Response 50Hz to 20kHz, Power Rating LF: 1600W AES, 6400W peak, MF: 150W AES, 1000W peak, HF: 80W AES, 450W peak, Sensitivity: LF: 104dB @ 1W/1m, MF/HF: 118dB @ 1W/1, Maximum SPL: LF: 136dB continuous, 142dB peak @ 1m, MF/HF: 139dB continuous, 145dB peak @ 1m, Low Frequency Driver 4 x 15″ (380 mm) weather resistant long excursion woofer, Mid Frequency Driver 3.5″ (90 mm) voice coil coaxial compression driver, High Frequency Driver 1.75″ (44 mm) voice coil coaxial compression driver, Crossover 500Hz Active, 6.5kHz Passive in complete as per the direction of engineer incharge .The final make ,tds,drawing ,OEM Authorization,design will be submitted for approval of SE Electrical and CE Building .
Make: L-Acoustics, Martin Audio, Pulz Audio (ESM6)
3
208675
626025
... More
SITC of Cinema Surround Speaker System with Frequency Response 75Hz to 18kHz, Power Rating 250W AES, 750W peak, Sensitivity 94dB @ 1W/1m, Maximum SPL 117dB continuous, 123dB peak @ 1m, Nominal Impedance 8Ω, Transducers 8″ (200 mm) dual cone full range driver, Dispersion 90° conical
Make: L-Acoustics, Martin Audio, Pulz Audio (DC8)
32
14195
454240
... More
SITC of four channel power amplifier with Output Power(per channel): 4 x 480 Watts @ 8 ohm, 4 x 820 Watts @ 4 ohm, 2 x 1380 Watts @ 8Ω in bridge mode, Frequency Response 20Hz - 20kHz, THD: 0.1%, SNR: 110dB, Damping factor 300, Crosstalk -60dB
Make: L-Acoustics, Martin Audio, Pulz Audio AD4820)
4
94180
376720
... More
SITC of Active Cinema Crossover with Crossover Frequencies For Stereo Mode: 60Hz, 80Hz, 100Hz, 120Hz, 180Hz, 250Hz / For Sub MONO Mode: 80Hz, 120Hz Frequency Range 20Hz to 20kHz, Signal to Noise Ratio 85dB
Make: L-Acoustics, Martin Audio, Pulz Audio X047
1
23800
23800
... More
SITC of Digital wireless handheld Microphone with UHF transmission greatly enhances range, reliability and scalability of 56 MHz Bandwidth will allow for up to 90 channels Up to 2,200 or more selectable frequencies with Mobile App integration setup 134 dB or more transmitter dynamic range Lithium Ion battery pack delivers up to 10 hours of operation (up to 6 hours of operation with AA batteries) Transducer principle dynamic with Pick-up pattern cardioid, Sound pressure level 154 dB SPL, Transmit power : 10 mWin complete as per the direction of engineer incharge .The final make ,tds,drawing ,OEM Authorization,design will be submitted for approval of SE Electrical and CE Building .
Make: Sennheiser (EW-D 835 S), Clock Audio, Rode
6
49470
296820
... More
SITC of Digital wireless lavalier Microphone with UHF transmission greatly enhances range, reliability and scalability of 56 MHz Bandwidth will allow for up to 90 channels Up to 2,200 or more selectable frequencies with Mobile App integration setup 134 dB or more transmitter dynamic range Lithium Ion battery pack delivers up to 10 hours of operation (up to 6 hours of operation with AA batteries) Transducer principle dynamic with Pick-up pattern omnidirectional, Sound pressure level 130 dB SPL, Transmit power : 10 mW in complete as per the direction of engineer incharge .The final make ,tds,drawing ,OEM Authorization,design will be submitted for approval of SE Electrical and CE Building .
Make: Sennheiser (EW-D ME2 Set), Clock Audio, Rode
2
49470
98940
... More
SITC of active antenna splitter 2 x 1:4 or 1 x 1:8, Digital transmission operating in the UHF spectrum , Auto scan features, 134 dB or better audio input dynamic range , 56 MHz of tuning bandwidth and provision up to 90 channels, 2,200 or more selectable frequencies in complete as per the direction of engineer incharge .The final make ,tds,drawing ,OEM Authorization,design will be submitted for approval of SE Electrical and CE Building .
Make: Sennheiser (EW-D ASA), Clock Audio, Rode
2
40375
80750
... More
SITC of digital directional antenna with Impedance:50 Ohm; Connector: BNC; Pick-up pattern: directional;Frequency range: 470 - 1075 MHz or better;Antenna gain: 5 dBi or better; in complete as per the direction of engineer incharge .The final make ,tds,drawing ,OEM Authorization,design will be submitted for approval of SE Electrical and CE Building . Make: Sennheiser(ADP UHF), Clock Audio, Rode
2
22270
44540
... More
SITC ANTENNA BOOSTER with 56 MHz of tuning bandwidth and provision up to 90 channels, 2,200 or more selectable frequencies in complete as per the direction of engineer incharge .The final make ,tds,drawing ,OEM Authorization,design will be submitted for approval of SE Electrical and CE Building . Make: Sennheiser (EW-D AB (Q)), Clock Audio, Rode
2
13345
26690
... More
SITC of super-cardioid pre-polarized condenser instrument microphone with frequency response of 40 Hz- 20,000 Hz or better and sensitivity of 3 mV/P at 1 kHz or better , Maximum SPL of 139 dB at 1 kHz. Nominal impedance of 50 Ohm or better, with a min. terminating impedance of 1 kOhm or better in complete as per the direction of engineer incharge .The final make ,tds,drawing ,OEM Authorization,design will be submitted for approval of SE Electrical and CE Building .
Make: Sennheiser (E 614), Clock Audio, Rode
4
13345
53380
... More
SITC of pre-polarized condenser gooseneck microphone with overall length of 450mm or better, with XLR3M-type connector, shall offer radio frequency interference (RFI) shielding against intermodulation from wireless equipment or devices, cardioid microphone capsule with uniform 120° angle of acceptance (-3dB) or better, frequency response of 50 Hz to 20,000 Hz or better and sound input levels handling capability of minimum 130 dBspl or better, nominal equivalent noise level of 26 Dba or better and output shall be low impedance balanced (100 ohms) with current consumption shall be 3 mA or better. Table stand with Microphone modes Toggle on / off, Push to mute, Push to talk, permanent on for connecting and operating XLR gooseneck microphones with XLR-3F microphone input and an XLR-3M microphone output operating on 48 V phantom power and current consumption of 3.7 mA or better. Make: Sennheiser (MEG 14-40 + MAT 133-S), Clock Audio, Rode
6
27625
165750
... More
SITC of dynamic cardioid vocal microphone with frequency response of 40 Hz – 16,000 Hz or better and the sensitivity of 2.7 mV/Pa at 1 kHz or better, nominal impedance of 350 Ohm or better, with a min. terminating impedance of 1 k Ohm in complete as per the direction of engineer incharge .The final make ,tds,drawing ,OEM Authorization,design will be submitted for approval of SE Electrical and CE Building .
Make: Sennheiser (E 835), Clock Audio, Rode
2
6715
13430
... More
SITC of cardiod pre-polarised condenser microphone with Frequency response of 20 - 20,000 Hz, Sensitivity of 7 mV/Pa;2.3 mV/Pa / 0.7 mV/Pa(with pre-attenuation) or better, Sound pressure level at 1 kHz of 137/147/157 dB SPL(depending on pre-attenuation)Nominal impedance 100 ohm Min. terminating impedance 1 k ohm or better in complete as per the direction of engineer incharge .The final make ,tds,drawing ,OEM Authorization,design will be submitted for approval of SE Electrical and CE Building . Make: Sennheiser (E 914), Clock Audio
8
22950
183600
... More
SITC of dynamic cardioid vocal microphone with frequency response of 40 Hz – 18,000 Hz or better and the sensitivity of 2.8 mV/Pa at 1 kHz or better, nominal impedance of 350 Ohm or better, with a min. terminating impedance of 1 k Ohm in complete as per the direction of engineer incharge .The final make ,tds,drawing ,OEM Authorization,design will be submitted for approval of SE Electrical and CE Building .
Make: Sennheiser (E 935), Clock Audio, Rode
2
12325
24650
... More
SITC of microphone set consisting of steel drum case; 1 nos dynamic cardioid microphone with an integral stand mount, fitted with a hum compensating coil for low frequency instruments with frequency response of 20 Hz – 16,000 Hz or better and the sensitivity (free field, no load) of 0.25 mV/Pa at 1 kHz or better and 0.9 mV/Pa at 50 Hz or better, nominal impedance of 350 Ω or better, with a min. terminating impedance of 1 kΩ; 4 nos dynamic cardioid instrument microphone for drums and percussion as well as brass and woodwind instruments featuring an integral stand mount and hum compensating coil with frequency response of 40 Hz – 18,000 Hz or better and the sensitivity (free field, no load) of 1.8 mV/ Pa at 1 kHz or better. nominal impedance of 350 Ω or better, with a min. terminating impedance of 1 kΩ or better; 2 nos super-cardioid pre-polarized condenser instrument microphone with frequency response of 40 Hz- 20,000 Hz or better and sensitivity of 3 mV/P at 1 kHz or better, Maximum SPL of 139 dB at 1 kHz or better. Nominal impedance of 50 Ohm or better, with a min. terminating impedance of 1 kOhm or better in complete as per the direction of engineer incharge .The final make ,tds,drawing ,OEM Authorization,design will be submitted for approval of SE Electrical and CE Building . Make: Sennheiser(DRUM KIT 600), Clock Audio, Rode
1
72930
72930
... More
The scope of work involves Supply, installation, laying, testing, commissioning, and programming of advanced digital mixing technology console offers the full potential of advanced digital mixing technology, providing total recall of settings, including fader positions and preamp gain, ensuring a seamless workflow for multiple applications, The product must be delivered fully calibrated and ready for immediate use with user-friendly interface, featuring an 800 x 480, sixteen-million-color touchscreen with a dedicated data encoder, enables super-fast and easy access to all settings, Installation will be executed in strict accordance with the Architectural Drawings and the instructions provided by the Engineer-in-Charge (EIC) ability to save and recall scenes (snapshots) with the press of a button enhances operational efficiency. The console's high-class, low-latency 24-bit A/D and D/A converters ensure superb transparency, minimal distortion, and an ultra-low noise floor, delivering a warm, musical sound. With convenient recording and playback solutions, iPad control, personal monitoring options, and the choice of local or remote Cat5 I/O, this console is designed for ultimate flexibility and control. The integration of motorized ALPS faders, arranged over 2 layers, ensures precise fader automation, while dedicated keys and screen tabs for channel processing, USB audio control, and setup menus streamline operation. Additionally, the console reduces background noise and minimizes the risk of feedback, even when multiple microphones are open simultaneously, making it an essential tool for any professional sound reinforcement system with 4 DCAs and 40 sources to the mix including stereo inputs and returns, Qu-32 is the equivalent of a 46 channel, 8 groups, 4 VCA analogue console with extensive outboard equipment (38 gates, 62 compressors, 24 graphic equalizers and 4 stereo effects)! All Groups can be used in Mix mode, allowing Qu-32 to offer up to 11 monitor mixes (4 mono + 7 stereo) higher or improved specifications beyond those mentioned above are welcome and considered within the specified make and standards, any deviations from this standard will not be accepted, all products must come with an unconditional warranty covering a minimum of three years. Additionally, comprehensive onsite training must be provided to the end-user to ensure proper operation and maintenance of the installed equipment.(Make:- YAMAHA, Soundcraft, Allen&Heath, MACKIE)
1
333757
333757.6
... More
42U EQUIPMENT RACK with accessories and castor wheel Supply, Installation, Testing and Comissioning of Equipment Rack Work will be executed as per the instructions of Engineer-in-charge (EIC) & Architectural Drawings, including of all tools, tackles, machineries, manpower, staging, any consumables, etc. complete. (Make:- Legrand, MTS, ValRack, Digitech, Netrack, Rittal, Comrack )
1
54325
54325
... More
Cables and Connector
1
212500
212500
... More
Detailed drawing, design of Sound system,Lighting system, electrical services and co-ordination with the civil architect for proper design of acoustic of the auditorium so that, it will be compatible with the sound system.The designer must have completed atleast 10 nos. of reputed auditorium project (Make-Auditorium Works/Stage works)(Note-Reimbursement of the amount will be done only after necessary approval of design and drawing from S.E, Electrical Circle(R&B) and Chief Engineer, Buildings, Odisha, Bhubaneswar
1
150000
150000
... More
DATA NETWORKING
-
-
-
... More
Supply & Laying of Cat6 23Awg UTP Cable, through existing conduit, Make: Legrand/Systimax/Panduit
890
62
55180
... More
Supply & fixing of RJ-45Jack of Category 6 with Dual-port British-style Face plate 86x86 mm with Curveture and wall mount box Make: Legrand/Systimax/Panduit
10
947
9470
... More
Supply & fixing of Cat6 24 Port Loaded Patch Panel:Make: Legrand/Systimax/Panduit
2
9176
18352
... More
Supply & Installation of Cat6 Factory crimpped moulded patch cord,1mtr, Make: Legrand/Systimax/Panduit
80
326
26080
... More
Supply & Installation of Cat6 Factory crimpped moulded patch cord, 2mtr. Make: Legrand/Systimax/Panduit
10
385
3850
... More
Supply & Installation of 6F Single Mode Armoured FO Cable through existing conduit. Make: Legrand/Systimax/Panduit
105
111
11655
... More
Supply and Installation of 6 Port Rack Mount Draw Type LIU loaded with SM SC Adaptors and Pigtails including core splicing and connnectrisation. Make: Legrand/ Systimax/ Panduit
2
8002
16004
... More
Supply & Installation of Single Mode SC-LC Type OFC Patch Cord, 2mtr length. Make: Legrand/Systimax/Panduit
2
1554
3108
... More
Supply & Installation of 1000Base LX Fiber Transceiver. Make: Cisco/Digisol/HP
2
8500
17000
... More
Supply and installation of 24 Port Layer2 Giga (10/100/1000BaseT) PoE Switch with 4 x 1Gig SFP Port , Switching Capacity 56 Gbps, Throughput 41.7 Mpps ,Management Port 1 x RJ 45 Console port ,PoE power budget 370 Watt, Switch should support IEEE 802.3af & IEEE 802.3at standard ,MAC Address 16K , Jumbo Frame 12K ,Temperature Working 0°C~50°C, storage -40°C~70°C, Power Supply AC: 100~240VAC.Digisol Model No. DG-GS1528HPE-P/Cisco/HP
2
72500
145000
... More
Supply & Installation of 9U/500Wall Mount Rack with FAN, PDU, Cable manager and H/W Pkt. Make : Netrack/Valrack/Rittal/APW
1
8177
8177
... More
Supply & fixing of 24U 600/650D UL Listed Floor mount Rack loaded with one no 10Skt 5/15A power distribution unit, 4nos cable manager, Four nos 90CFM FANs, 1no HD Self and one pkt H/W screw. Make : Netrack/ Valrack/ Rittal/ APW
1
35800
35800
... More
Supplying and fixing of following sizes of medium class PVC FRLS conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .Make-AKG/ BEC/ Precision/ Norpak
-
-
-
... More
20 MM
410
123
50430
... More
25 MM
480
125
60000
... More
SITC of Indoor dual band Wifi6 Wireless Access Point with 2x2 MIMO Compliant to IEEE802.11a/b/g/n/ac/ax. Make: Digisol/Cisco/Grandstream
3
14025
42075
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.
-
-
-
... More
Ground Floor
-
-
-
... More
20mm dia PVC ASTM pipe (sch-80)
60
160
9642
... More
25mm dia PVC ASTM pipe (sch-80)
35
226
7938
... More
First Floor
-
-
-
... More
20mm dia PVC ASTM pipe (sch-80)
28
167
4687.2
... More
25mm dia PVC ASTM pipe (sch-80)
25
233
5835
... More
Second Floor
-
-
-
... More
20mm dia PVC ASTM pipe (sch-80)
28
173
4869.2
... More
25mm dia PVC ASTM pipe (sch-80)
25
240
6000
... More
Third Floor
-
-
-
... More
32mm dia PVC ASTM pipe (sch-80)
18
325
5855.4
... More
40mm dia PVC ASTM pipe (sch-80)
15
427
6412.5
... More
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
... More
15mm dia CP angle stop cock (Jaquar Make)
29
861
24977.7
... More
15mm dia Two way bib cock (Jaquar make)
4
1255
5020
... More
15mm dia CP bib cock (Jaquar Make)
3
1082
3248.4
... More
20mm dia CP concealed stop cock (Jaquar Make)
6
1132
6792
... More
15mm dia CP Health Fucet (Jaquar Make)
4
1648
6594.8
... More
25mm dia brass full way valve (Shakti make)
6
1198
7189.8
... More
32mm dia brass full way valve (Shakti make)
4
1753
7015.6
... More
15mm CP Extension piece
42
52
2209.2
... More
125mm CP grating
20
78
1572
... More
15mm size C.P. flange
42
77
3250.8
... More
Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge
-
-
-
... More
2000 liters capacity PVC water storage tank
2
41919
83839.4
... More
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.
40
51
2040
... More
Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge
40
171
6864
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
47
195
9197.9
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
... More
110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
79.93
483
38653.18
... More
110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)
7
497
3481.1
... More
110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
10
293
2936
... More
110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
12
232
2784
... More
110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
14
407
5703.6
... More
110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
7
58
407.4
... More
110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
14
322
4517.8
... More
110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make)
12
386
4632
... More
110mm U-PVC Plain shoe bend(Ori Plast/Finolex/Supreme Make)
12
232
2784
... More
110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
30
160
4803
... More
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
... More
580mm size Orissa pan (Hindware/Parryware/Neycer make)
3
3627
10882.2
... More
Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
-
-
-
... More
10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
5
2246
11232
... More
Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge
6
3392
20352
... More
Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal
8
5803
46429.6
... More
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
-
-
-
... More
European water closet with 'p' trap plain(Hindware/Parryware/Neycer make)
2
3096
6193.8
... More
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge.JAQUAR SINGLE PIECE-WATER COLSET P TRAP - LYS-WHT-0204P
2
19991
39983.2
... More
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
-
-
-
... More
Counter Top Basin (560x455) (Perryware/Hindwire/Nycer Make)
14
4803
67247.6
... More
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
25mmx600mm long CP towel rail
7
860
6022.8
... More
Towel ring
14
607
8505
... More
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.
-
-
-
... More
600mmx125mm plate glass shelf with CP/NP guard rails.
14
634
8887.2
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
-
-
-
... More
600mmx450mm size B.E mirror (swivelled type)
14
724
10143
... More
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
... More
CP soap holder
28
250
7025.2
... More
Toilet Paper Roll Holder (Jaquar/ Johnson Make)
8
577
4621.6
... More
Liquid Soap Dispenser with glass bottle (Jaquar/ Johnson Make)
12
962
11553.6
... More
Double Coat Hook (Jaquar/ Johnson Make)
8
700
5601.6
... More
Hand Dryer (HDR-WHT-M04A) (Jaquar Make)
3
6739
20218.5
... More
Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
42
201
8454.6
... More
Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
32
118
3804.8
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
5.5
5367
29521.25
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
5.5
7130
39219.95
... More
Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed series to be pre-approved by the Engineer-in-charge )
-
-
-
... More
Kajaria Tile 60cmx60cm
-
-
-
... More
Ground Floor
63.74
1195
76188.82
... More
First Floor
26.65
1206
32133.87
... More
Second Floor
26.65
1217
32429.63
... More
Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge )
-
-
-
... More
Kajaria tile 30cmx20cm
-
-
-
... More
Ground Floor
125.73
1132
142330.89
... More
First Floor
88.77
1147
101896.79
... More
Second Floor
88.77
1164
103370.34
... More
Granite
23.1
1753
40498.92
... More
Supplying & fitting fixing of unplasticised Poly vinly chloride (UPVC ) (FENESTA/ NCL/ VEKA LTD) Casement Door series dully manufactured using UPVC reinforced profile of 60mmx55mmx2.5mm for outer frame 102mmx60mmx2.5mm 2.13*0.75*85
11.18
8963
100228.75
... More
Dismantling & removing 2.5cm thick Marbal chips flooring stacking the useful materials for reuses and removing the debris with in 50 mtr. Lead in 9.30 sqm.
117.03
109
12861.6
... More
Dismantling & removing marvel chips dado from walls including racking out joints 12mm deep removing the debris with in 50 mtr lead in 9.30 sqm.
303.27
57
17347.04
... More
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 80 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 80 liter's along with 3 noa of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge
-
-
-
... More
Aqua guard pure Chill 80 PSS UV
2
87838
175676.8
... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge
-
-
-
... More
150mm dia P.V.C. pipe
15
1958
29377.5
... More
Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification.
-
-
-
... More
MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover )
3
18989
56968.8
... More
Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
4
22924
91696.4
... More
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge
-
-
-
... More
Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
4
9794
39179.6
... More
2 Nos. 20 Users septic tank of size 2.30m x 1.10m x 2.10m Internal size
-
-
-
... More
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.1 x 3.40 x 2.30 x 1.50 =
23.46
228
5353.81
... More
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft. 1 x 3.40 x 2.30 x 0.60 =
9.38
244
2297.82
... More
Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.
5.84
126
740.4
... More
Supplying all materials, labor T&P providing CC (1:3:6) with 4 cm HG metal including watering curing lead of all materials to site etc. complete.
-
-
-
... More
1 x 3.40 x 2.30x 0.15 =
2.34
5714
13371.23
... More
Supplying all labor T&P &Providing C.C. (1:2:4) with 12mm size broken hard granite chips including watering curing & lead of all materials to site etc. all complete.
-
-
-
... More
1 x 3.40 x 2.30 x 0.10 =
-
-
-
... More
1 x 2.30 x 1.10 x 0.05 =
-
-
-
... More
Total
1.82
7130
12949.71
... More
Providing C.C. (1:1½:3) with 12mm size hard granite chips of RCC work including hoisting and laying and curing with lead of all materials to site. 1 x 2.80 x 1.60 x 0.10 =
0.9
7775
6997.95
... More
Supplying all materials, T&P and providing MS reinforcement for RCC work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauges. 0.448cum x 2.50x 35.32 = 39.55 kg say rs
0.8
9213
7371.04
... More
Rigid & smooth centering & sheltering for RCC work including falls work & dismantling than after casting including cost of materials in ground floor.
-
-
-
... More
RCC floor, roof slab chhaja up to 4.430 m height
-
-
-
... More
1 x 2.30 x 1.10 =
-
-
-
... More
2(2.80+1.60) x 0.20 =
-
-
-
... More
Total
8.58
676
5807.8
... More
Supplying all materials labour T&P and providing 1st class KB brick work in CM (1:3) in foundation and plinth including watering and curing and lead of materials to site.
-
-
-
... More
1st footing
-
-
-
... More
2 x3.10 x 0.40 x 1.40 =
-
-
-
... More
2 x 1.10 x 0.40 x 1.40 =
-
-
-
... More
2nd footing
-
-
-
... More
2 x 2.80 x 0.25 x 0.70 =
-
-
-
... More
2 x 1.10 x 0.25 x 0.70 =
-
-
-
... More
Total
12.14
5503
66816.13
... More
Supplying all materials labour T&P and providing 12mm thick C.P (1:3) including watering curing and conveyance of all materials to site.
-
-
-
... More
1 x 2.30 x 1.10 =
-
-
-
... More
2(2.30+1.10) x 2.10 =
-
-
-
... More
2(2.80+1.60) x 0.60 =
-
-
-
... More
Total
44.18
178
7881.71
... More
Supplying all materials labour T&P and providing cement punning including watering curing and conveyance of all materials to site. Same as plastering
44.18
33
1488.87
... More
Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification.
6
268
1608.6
... More
Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge.
4
418
1672.4
... More
Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge.
2.36
477
1123.81
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%