Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 1,56,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_EICCL_87789_5Bid Award Id
ViewTender No
EE (R and B) Angul-46/ 2022-23Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Dismanting of prestressed / reinforced cement concrete grade M-20 and above incluidng T&P. & scaffolding where ever necessary sorting the dismantled materials disposal of unserviceable materials and stacking the serviceable materials with all lifts & lead of 1000m. with all labour, T&P. machineries etc. including labour cess but excluding GST complete as per specification & direction of the Engineer-in-charge
18.87
-
-
Removing old lime or cement plaster from walls including raking out joint 12mm deep and removing the debris from site with all leads as directed by the Engineer-in-charge including all labour and T&P. required for the work etc. including labour cess but excluding GST complete
674.8
-
-
Dismantling and removing Wall Tile including stacking the useful materials for re-use and removing the debries from site with all leads as directed by the Engineer-in-charge including all labour and T&P required for the work etc. including labour cess but excluding GST complete.
177.08
-
-
Dismantling and removing Old Floor Tile including stacking the useful materials for re-use and removing the debries from site with all leads as directed by the Engineer-in-charge including all labour and T&P required for the work etc. including labour cess but excluding GST complete.
116.79
-
-
Supplying, fitting and fixing GI Trafford (Dura shine) sheet (0.50 mm thick) in roof including drilling holes in windties fixing of ridges valley windties etc. complete including basic cost of fittings, all labour & T&P. required for the work etc. including labour cess but excluding GST complete (cost of windties will paid separately) as per direction of the Engineer-in-charge
639.46
-
-
RCC M20 having compressive strength of 20mpa, target mean strength of 30mpa, for150mm cubes at 28 days curing as per IS-456-2000 & I.R.C-212000 test conducted in accordance with I.S. 516 using 20mm & down graded size crusher broken hard granite coarse aggregate of approved quality and from approved quarry & other materials as per section 302 of I.R.C.21-2000 & IS-456-2000 of approved quality including centering, shuttering & form works for providing smooth & water tight surface, hoisting, lowering & laying concrete in layers not exceeding 30 cm. compacted thickness, compacting with mechanical vibrators true to lines, grades as per drawing & technical specifications, watering & curing for 28 days including basic cost, conveyance, royalties of all materials with all leads & lift, cost of all labour T&P, including labour cess but excluding GST & equipment required for mixing, transporting & placing in position vibrating, compacting, finishing & curing including all incidental expenses complete in all respect as per direction of the E.I.C. but excluding the cost of M.S. rods or Tor steel and binding wire & labour charges for bending binding & tying the grills Column Super structure (GF)
14.81
-
-
FF
3.18
-
-
Column Base Footing
6.54
-
-
Plinth Band
10.58
-
-
Bed wall & cover slab of Drain
35.45
-
-
Cutting, straightening the bent up M.S. Rods or Tor steel, using SAIL / TATA / RINL (grade Fe 5OOD} / JINDAL STEEL / SHYAM STEEL etc. including bending, binding, welding joining if necessary and tying the grills and placing in position as required for R.C.C. works and for providing required no of fan hooks hoisting, lowering, laying including basic cost, conveyance of all M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work including labour cess but excluding GST bending, binding and tying the grills in all floors (Payment will be made on weight of M.S. Rods or Tor steel only and no separate payment will be made towards the weight of binding wires)
GF
44.37
-
-
FF
5.63
-
-
Fly ash brick masonry in cement mortar (1:6) using (25x12x8cm) size bricks after immersing the bricks for six hours in water before use in Superstructure including, splays cutting, circular moulding and carbelling, champhering and similar such type of works watering, curing etc. all complete including basic cost, conveyance, royalties of all materials and cost of all labour, and T&P required for the work etc. including labour cess but excluding GST complete (Crushing strength of bricks should not be less than 75kg to 99 kg/cm2 with dimensional tolerance ±2%)(GF)
45.78
-
-
FF
18.25
-
-
16mm (5/8") thick cement plaster (1:6) over brick masonary finished smooth, after racking out the joints including watering and curing etc. with basic cost, conveyance, royalities of all materials and cost of all labour and T&P required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge
965.94
-
-
12mm (½") thick cement plaster (1:6) over brick masonry finished smooth, after racking out the joints including watering and curing etc. with basic cost, conveyance, royalties of all materials and cost of all labour and T&P required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge
482.47
-
-
Finishing wall with water proofing cement paint of approved shade two coats to give on even shade including basic cost of cement paint, all labour, T&P. and curing etc. including labour cess but excluding GST complete as per direction of Engineer-in-charge
120.77
-
-
Supplying fitting, fixing M.S. Pipe of post @2 nos. in each steps of 2'-8" height and aluminium channel for hand railing using in stair case as per approved design and specificatiion, buffing, polishing etc. with basic cost, conveyance of all materials, labour, T&P. etc. including labour cess but excluding GST required for the complete in all respect as per direction of the Engineer-in-charge
6245.63
-
-
Supplying fitting, fixing M.S. angular frame of size 25x25x3mm for ceiling incluidng cutting welding, errecting, one coat priming, basic cost, conveyance of all materials, cost of all labour, T&P. required for the work etc. including labour cess but excluding GST complete as directed by the Engineer-in-charge
792.82
-
-
Supplying, fitting and fixing M.S. pannel shutter single/double leaf of approved design in doors and windows including bending and cutting sizes of grooves in choukaths and for over lapping portion shutter where necessary, supplying, fitting and fixing cleats send blocks and fixing oxidized iron or chromium plated, iron aldrops, tower bolts, handles, irons hinges, screws, etc. including labour cess but excluding GST complete as per requirement and any additional fittings as directed by the Engineer-in-charge in all floors
723.64
-
-
Supplying fitting, fixing of M.S. Angular purlin, rafter & posts made with different angle and M.S. plate as per approved design including basic cost of all materials, welding, conveyance and labour including cost of errection etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge
2376.6
-
-
Supplying, fitting and fixing window M.S. grills, grill gates made of M.S. flat/square bar of approved specification design fitted & fixed including cutting the grooves in brick or RCC structure and making good to the damages with C.C. (1:2:4), cost of nails, screws but including basic cost of grills, conveyance, of all materials, labour, T&P. etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge
802.8
-
-
Providing fitting, fixing of aluminium door with OEL anodized aluminium door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member with in top and bottom portion fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. including labour cess but excluding GST complete as per direction of Engineer-in-charge
1218.04
-
-
12mm Novapan Board
79.59
-
-
5mm thick Black Glass
8.72
-
-
Supplying, fitting and fixing up window (sliding type) made of aluminium, section 9778 all window frame section No. 4095, 4096 & 9777, 3994 all shutter frame as panel ftted with rubber beading including lucking arrangement including all fitting, basic cost of materials, labour, T&P. etc. including labour cess but excluding GST complete as per direction of Engineer-in-charge Alluminium sliding
239.08
-
-
5mm thick black Glass
32.25
-
-
5mm thick plain Glass
12.48
-
-
Supplying, fitting and fixing of Vitrified tile of size 600x600mm in floor treads or steps and landing on 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigments using white cement in grating to match the shade of the tile etc. including basic cost, conveyance, royalties of all materials and labour, T&P required for the work etc. including labour cess but excluding GST complete as directed by the Engineer-in-charge (GF)
466.4
-
-
FF
37.19
-
-
Supplying, fitting and fixing of Industrial vitrified tile in floor on 20mm thick bed of Cement mortar (1:4) jointed with neat cement slurry mixed wiht pigment using white cement in grating to match the shade of marbles incluidng rubbing & polishing etc. with basic cost, conveyance, royalities of all materials and cost of all labour, T&P. required for the work etc. including labour cess but excluding GST complete as directed by the Engineer-in-charge
933.86
-
-
Supplying, fitting and fixing of vitrified tile of size 600x600mm in dado & skirting on 12mm thick bed of cement mortar (1:3) jointed with neat cement slurry mixed with pigments using white cement in grating to match the shade of the tile etc. including basic cost, conveyance, royalties of all materials and labour, T&P required for the work etc. including labour cess but excluding GST complete as directed by the Engineer-in-charge
280.01
-
-
Providing factory made FRP (alternately called GRP) Door frame of size 75mm x 100mm, fabricated using E-Glass chopped strand Mat (CSM), U.V. stabolized Isopthalic Gelcoat and impregnated with Isophthalic resin The thickness of the GRP skin shall not be less than 2.0mm. The door frame consist of four segments, lwhich are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six location for high screw holding capacity for fixing metalic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement. Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S. flat hold fast shall be provided with the frame. The material and process for manufacturing the door frame shall confirm to RV-TIFAC composites Design Centre's shandards and specifications. The finish of door frame will be approved plain colour using high quality pigments completed in all respect as per direction of the Engineer-in-charge.
22.23
-
-
Providing factory made single leaf rigid FRP (alternately called GRP) sandwich composite door shutter of 32mm thick, laminated with two GRP skins with wood grain finish, fabricated using UV-stabilized Isopthalic Gelcoat and one layer of 450 gsm. E-glass Chopped Strand Mat (CSM) impregnated with crthopthalic, pclyester resin. The thickness of the skins shall not be less than 1.5mm, Expanded Polystyrene (EPS structural foam panel of 29mm thickness and a density of 20 kg /Cu. mtr. shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinforcements for fixing the metal fittings such as tower bolts, aldrops, handles etc. shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reinforcements and the skins. The materials and process for manufacturing the door shutters shall confirm to RV-TIFAC composites Design Centre's shandards and specifications and the door shutters tested in confirmation to IS 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy weight mild steel, but hinges type-I (ISI marked) size 100mm are to be fitted on one side of shutter completed in all respect as per direction of the Engineer-in-charge.
7.8
-
-
Providing and fixing 30 mm thick Flush Door shutters conforming to IS:2002 (Part-I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face vencers on both face of shutters inclusive of 4 Nos of Stainless steel Butt Hinges (100 mm x 60 mm x 2.5 mm) 40 mm stainless steel screws. Cylindrical Lock(Godrej-9843), Tower Bolt SS 10 x 300 mm (Bathroom)(Godrej 3264), PVC Door Buffer with SS Screw, teak wood lipping around the edges & paste with 1.5 mm thick laminate on both side of the flush door, etc. including the cost of all materials, hardware fittings, cost of all labour, conveyance, loading, unloading, T&P, etc including labour cess but excluding GST complete as per the direction of Engineer-in-charge.
11.38
-
-
Supplying, fitting and fixing of Unplasticised Poly Vinyl chloride (UPVC) (FENSTA) / NCL VEKA Ltd) three track - three pannel sliding window shutter 60- series duly manufactured using UPVC reinforced profiles of 108 mm x 45mm x 2.5mm for outer frame & window sash of 39mm x 58mm x 2.5mm capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefabricated & welded through fusion welding the window frame shall be fitted with 6mm thick clear toughened glass of SAINT-GOBIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using reinforced large coupler at the side using anchor fasteners silicon rubber sealant easy / glazing / deglazing at site etc. including basic cost and conveyance of all materials, accessories, labour charges, materials & product conforming to ASTM D 638-14 EN-477-95 and other applicable codes and standards as per specification and direction the Engineer-in-charge
19.69
-
-
Removing old grading plaster from roof slab cleaning the surface, lowering and removing the debries within 50m lead as per direction of the Engineer-in-charge including basic cost of all labour, T&P etc. including labour cess but excluding GST complete
34.47
-
-
40mm thick grading concrete in C.C. (1:2:4) over roof slab by 12mm and down graded crusher broken chips finished smooth with proper slope after chipping, chiselling and cleaning the roof slab includng providing one layer of chiken wire mesh and hoisting, watering, curing, basic cost, conveyance royalities of all materials required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge
34.47
-
-
Finishing wall surfaces of wall with acrylic wall primer (water bound) one coats over inside surface of wall including basic cost, conveyance, of all materials, all labour, T&P. required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge ( GF)
2732.46
-
-
FF
7917.39
-
-
Finishing wall surfaces of wall with weather coat (Peach bloom) two coats to outer surface of walls including basic cost, conveyance, of all materials, all labour, T&P. required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge (GF)
7516.87
-
-
Finishing wall with plastic emulsion paint of approved shade two coats to surface of walls including basic cost of paint, conveyance of all materials, labour, T&P. required for the work etc. including labour cess but excluding GST complete as per direction of Engineer-in-charge (FF)
3132.98
-
-
Finishing wall surfaces of wall with acrylic wall putty (water based) of approved make and finished smooth and even surface to receive painting including basic cost, conveyance, of all materials, all labour, T&P. required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge (FF)
7917.39
-
-
Painting two coats with enamel paints of approved shade in all floors to wood and iron works including sand papering, polishing the surface, basic cost, conveyance, of all materials, all labour and T&P. required for the work including labour cess but excluding GST including the cost of paint and primer as per the direction of the Engineer-in-charge (GF)
403.01
-
-
Earth work in excavation of foundation trenches in hard soil within 50m initial lead and 1.5m initial lift including rough dressing breaking clods to maximum 5cm to 7cm and laying in layers not to exceeding 0.3m in depth including removal of stumps, roots, shrubs and other foreign debries from the cut surface including basic cost, conveyance all T&P and cost of all labour as required for the work etc. including labour cess but excluding GST complete as per direction of Engineer-in-charge
243.27
-
-
Supplying and filling foundation and plinth with sand in layers not exceeding 150 mm thick well watered and rammed with basic cost, conveyance, royalities and of all materials, labour, T&P required including labour cess but excluding GST for the work etc. including labour cess but excluding GST complete (Measurement to be taken on compacted section only)
243.2
-
-
Cement concrete (1:3:6) in foundation and floor i;e below the base course of terrazo flooring using 4cm (1½”) size black crusher hard broken granite aggregates / chips / metal of approved quality and from approved quarry, including lowering, laying concrete, watering curing etc. complete to required level laid in layers not exceeding 1'-6" thick including basic cost, conveyance, royalities of all materials and cost of all labour, T&P. required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge
57.76
-
-
Fly ash brick masonry in cement mortar (1:6) using (25x12 x8cm) size bricks after immersing the bricks for six hours in water before use in Foundation and Plinth including, splays cutting, circular moulding and carbelling, champhering and similar such type of works watering, curing etc. all complete including basic cost, conveyance, royalties of all materials and cost of all labour, and T&P required for the work etc. including labour cess but excluding GST complete (Crushing strength of bricks should not be less than 75kg to 99 kg/cm2 with dimensional tolerance ±2%)
49.19
-
-
Construction of embankment with approved material obtained from borrow pits with all lifts & leads, transporting to site by mechanical means within a lead of 5km. spreading, grading to required slope and compacting to meet the requirement of table 300-2 & Clause 305 of MoRT&H Specifications for Road & Bridge works (5th Revision) including basic cost, conveyance, royalties of all materials, cost of all labour, T&P required for the work etc. including labour cess but excluding GST complete as per specification & direction of Engineer-in-charge with ordinary compaction by PRR.
2353.55
-
-
Cement concrete work (1:2:4) using 12mm (½”) size black hard crusher broken granite chips of approved quality and from approved quarry over top of wall including hoisting, lowering, laying and compacting, watering & curing, as directed including basic cost, conveyance, royalities of all materials and cost of all labour and T&P. required for the work etc. including labour cess but excluding GST complete in all respect as per direction of the Engineer-in-charge (mixture machine to be used at site).
32
-
-
Providing fitting, fixing of cow catcher with ISMB- 225 as support beam including cutting welding fabricating with basic cost, conveyance of all materials,T&P labours required for the work including labour cess but excluding GST as per specification & direction of the Engineer-in-charge
8111.25
-
-
Providing fitting, fixing of 3mm thick aluminium composite pannel with O.E.L. anodized aluminium section of 9202 as vertical member & horizontal member for frame by means of tapered clip No.4660 & the frame to be completed by means of jointing angle No. 1855 including basic cost, conveyance, of all materials, labours etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge
66
-
-
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @0.90mtr C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with basic cost, conveyance of all materials, labour, T&P. etc. including labour cess but excluding GST required for the complete in all respect as directed by the Engineer-in-charge in all floors
768.91
-
-
PCC M-15 in foundation and floor i;e below the base course of terrazo flooring using 40 mm and down graded size black hard granite crusher broken aggregates of approved quality and from approved quarry, including lowering, laying concrete, watering curing etc. complete to required level laid in layers not exceeding 1'-6" thick including basic cost, conveyance, royalities of all materials and cost of all labour, T&P. required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge
15.39
-
-
Providing weep holes in Brick masonry / Plain /Reinforced concrete abutment, wing wall / return walll with 100 mm dia AC pipe etc.complete as per drawing including basic cost of all materials, labour T&P required for the work including labour cess but excluding GST complete as per direction of the Engineer-in-charge
27.99
-
-
25mm thick grading Concrete (1:2:2) over roof slab using 12mm & down graded size black hard crusher broken granite chips of approved quality and from approved quarry, including finished smooth with proper slope after chipping, chiselling and cleaning the roof slab including hoisting, watering, curing, basic cost, conveyance, royalities of all materials and cost of all labour, T&P required for the work etc. including labour cess but excluding GST complete as per direction of the Engineer-in-charge
100.95
-
-
PART-B (E.I WORKS)
Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5Amp, 250V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size, MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection as per direction of Engineer in Charge(Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/HPL/KEI) Group-A
85
-
-
Group-B
97
-
-
Group-C
74
-
-
Point wiring for 5A /6Amp socket outlet with 2 X 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20mm dia non-metallic PVC flexible conduit with piano type switch, Phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 X 1.5sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required (Make of wire -Finolex/ L&T/ Anchor/ Havells/V-Guard/HPL/KEI)
28
-
-
Supply and fixing of 5/6 Amp plug with switch on existing board (Piano type/cover including connection etc. as required )
48
-
-
Supply and fixing of 5/6 Amp switch on existing board (Piano type/cover including connection etc. as required )
74
-
-
S/F of computer board consisting 2 nos 5amp and 2 nos 15amp switch and socket including wiring and connection as per required.
17
-
-
Supply and fixing of metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing of 6pin 5/6 & 15/16Amp socket outlet and 15/16Amp piano type switches connection painting etc. as required. (make-Anchor/ Cona/HPL/KEI)
25
-
-
S/F of computer board consisting 3 nos 5amp and 1 nos 15amp switch and socket
28
-
-
s/f of ac point consisting of 0-32A starter and piano type socket with all connection compelete s per the direction of engineer in charge
10
-
-
Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required.(Make of wire-Finolex/L&T/Anchor/Havells/V-Guard//HPL/KEI) 2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia
460
-
-
2 X 2.5 sq.mm +1 X 1.5 sq.mm -do-
640
-
-
2 X 4 sq.mm +1 X 1.5 sq.mm -do-
340
-
-
2 X 6 sq.mm +1 X 2.5 sq.mm -do-
240
-
-
4 X 6 sq.mm +2 X 2.5 sq.mm -do-
160
-
-
1x1.5mm2 for inverter wiring
267
-
-
Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 415V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-HPL/ Havells/ Legrand /L&T/C&S.) 8 Way Double Door
10
-
-
4+12 Way Double Door
4
-
-
Supply and fixing of 5Amp to 32A rating 240 V/415 V "B" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make-HPL/ Havells/ Legrand /L&T/C&S) Single pole (SP)
48
-
-
32A DP MCB
10
-
-
40A DP MCB(C-Series)
8
-
-
40A FP MCB
4
-
-
63A FP MCB(C-Series)
10
-
-
Supplying and fixing of Call Bell / Buzzer ISI marked suitable for DC /AC single phase 230 volts complete as required.
2
-
-
S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987as per direction of Engineer in Charge
43
-
-
s/f of tube light 18watt /20 watt led fitting with cover( Make-Bajaj/ Philips as per the direction of side engineer in charge)
210
-
-
S/F. Of 48"AC Ceiling fans including all connections and accessories of Usha Allure Dlx/Havells Pacer/Orient Summer Pride/Equivalent make.
40
-
-
Providing and fixing 200cm length extra down rod of G.I. pipe 20 mm dia heavy gauge including painting etc as required .
30
-
-
Supply and fixing of Electronic Type fan regulator (Make-Cona/ Anchor/ Usha/Bajaj)
45
-
-
S/F. Of 400mm Wall fans including all connections and accessories of Usha/Orient/Havells/Equivalent make.
14
-
-
S/F of 300mm exhaust fan in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required of Usha/Orient/Havells/Equivalent make.
16
-
-
S/F of 90 W LED Street Light CITYLINER NEO new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover.(Phillips/Havells/bajaj/Crompton)
5
-
-
S/F of 18 W Surface mounted LED downlighter with white powder coated aluminium housing with integrated electronic driver.(Make-Philips/havells/Bajaj/Crompton/Equivalent)
35
-
-
S/F of 2'x2' 34W Environmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling.(make-Philips/Crompton/Havells/Bajaj/Equivalent)
15
-
-
Supply and fixing of 4.5 kg CO2 type fire exstinguishers complete in all respect including initial fill and wall suspension brackets and shall confirm to IS 15683. make-safex/Minimax/Cease fire/Equivalent
8
-
-
Supply and fixing of ABC stroed pressure powder type fire extinguisher of 6 Kgs. Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with control discharge hose, wall mounting bracket etc. complete, confirming to IS:15683.(make-safex/Minimax/Ceasefire/Equivalent)
7
-
-
Supply, Installation & commissioning of 1.5 Ton 5 star inverter A/C Machine ( Make- Bluestar/Hitachi/ Daikin/Equivalent ) as per the direction of the Site Engineer in Charge.
4
-
-
Supply and fixing of 5 KVA Volts Stabiliser ( 90-240V) ( Make- V-guard, microtek)
4
-
-
S/f of extra Copper Pipe for AC Machine.
14
-
-
S/F of Angle frame for installation of Outdoor Unit for AC machine
4
-
-
Installation charges of AC machine.
4
-
-
Supply of 2.5 sq mm 4 core PVC UnArmoured Copper cables ISI marked(make-Havells/Polycab/Nicco)
14
-
-
special cu plate earthing-Supply and fixing of Special Coper Plate (600*600*3.15mm with running coper flat 25*5mm long) Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as per the directuion of the site engineer incharge
1
-
-
Supplying and laying 25 mm x 5 mm copper strip on surface or in recess for connection etc as required as per direction of Engineer in Charge.
10
-
-
Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing as required
20
-
-
Supply of 35 sq mm 3-1/2 core XLPE insulated Aluminium Armoured cables ISI marked.(Make-Havells/Polycab/KEI/Equivalent)
145
-
-
MV cable laying exceeding 25 sq.mm to 120 sq.mm in ground Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size excedding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation , sand cushioning, protective covering and refilling the trench etc. as required.
135
-
-
s/f of 24x36x10 no 16/18 SWG sheet metal for main 100 amp panel board having 100 A 4 pole MCCB 25 KA-1No.s, 63 amp 4 pole MCCB 16kA-2 No.s and 40A DP MCB-6 No.s with 25X4 mm electrolyte cu bus bar and with ampere meter, voltmeter, toggler switch,three nos led indicator and as per the direction of site engineer in charge(MAKE-Legrand/Siemens/Schneider)
1
-
-
Supply of 12 mtr High Mast, top dia 150 mm, Bottom dia 310mm,Section-2(Section Length-6250mm)thickness 3mm,Base Plate - 520x25mm, PCD - 445mm, with following items : High mast sections with base plate, Lantern Carriagesuitable to fix 8 no.s of Luminairies(200W LED Flood Light) Summetrically, 3 suspension head frame, Foundation Bolt - M24x750(6 No.s) with template and anchor plate.(Make-Utkarsh/Bajaj/Valmont)
1
-
-
Double Drum winch (Gear Ratio - 50:1),Power Tool, tralling cable 5 corex2.5 sq.mm, 6 mmSS wire rope( Grade AISI 316),Compensating Disc,L-Stopper (3-No.s), Manual operating Handle, Mounting Plate, lighting arrestor and earthing spike(GI).
1
-
-
Errection of 12.5 mtr high mast with the help of suitable tools and plants.
1
-
-
Construction of Foundation for high mast
1
-
-
S/F of 150W LED flood light including all connectins and accessories.(Make-Havells/Bajaj/Philips/Equivalent)
8
-
-
S/F of LED aviation light ISI Marked.
1
-
-
Supply of 16 sq mm 4 core XLPE insulated Armoured cables ISI marked..(Make-Havells/Polycab/KEI /Equivalent)
55
-
-
Supply delivery and Installation of 2.5mmsq. 3 core round flexible copper cable for wiring from junction box to light including the labour charges towards connection .(Make-Finolex/Polycab/Havells/Equivalent)
49
-
-
MV cable laying in ground Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size upto 25 sq.mm direct in ground including excavation , sand cushioning, protective covering and refilling the trench etc. as required.
50
-
-
Supply and fixing of Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required
2
-
-
Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing as required.
20
-
-
S/F of 24x24x10 no 16/18 SWG sheet metal for main 63 Amp panel board having 1 No. of 63 amp FP MCB(C-Series), 1 No. of Timer, 1 No. of Power contactor , 1 No. of 40 amp electrolyte cu bus bar,ampere meter, voltmeter, toggler switch,three nos led indicator,Drum insulator,danger Board as per the direction of site engineer in charge (make Siemens/ legrand/Schneider)
1
-
-
Supply of 7 mtr long hot dip Gblvanized Octagonal pole manufactured from HT steel as per BS EN 10025/IS 2062 having minimum yield strength of 350 N/ SQMM having top dia of 70 MM A/F and bottom dia of 130 MM A/F or ore of 4 mm thick or more , base plate as per IS 2062 complete with 4 nos. En 8 grade foundation bolts to withstand basic wind speed of 180 KM/HR wind speed (As per structural calculation of pole manufacturer ) or more (Make of poles: Utkarsh/Bajajl/Valmont or equivalent
5
-
-
Construction of foundation for street light pole with supply of all materials such as steel reinforcemnt metal chips,cement ,sand,cable,entry pipe,shuttering for rcc work(1:1.45:3) of suitable size with labour charges for erection and commisioning of pole wire to proper aligment,including fitting of the lamp.
5
-
-
S/F of Semi-integrated Solar LED strret Light including 60W LED luminaire with in-built solar charge controller,150Wp Solar PV module,12.8 Volt 54AH LIFEPO4 battery,2 days(24Hrs) back up with dimming mode by activating PIR Sensor,The Luminaire is having the provision for the titable/adjustable mounting bracket to mount it on the top of the octagonal pole directly,PV structure,battery box,wires and other accessories (Make-Panasonic/Bajaj /Crompton/Havells/Equivalent).
5
-
-
S/F of 2300 VA/ 24 Volt Pro UPS sine wave inverter (Make-Luminious / Microtek / Livguard/Equivalent)
5
-
-
S/F of tall tubular battery of 150 AH (Make-Exide/Luminious/Livguard/Equivalent)
10
-
-
S/F of trolley for double battery
5
-
-
PART-C (P.H WORKS)
Major repair work(P.H. work)
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.
20mm dia C-PVC Pipe
Ground floor
30
-
-
First floor
30
-
-
32mm dia PVC Pipe
40
-
-
40 mm dia PVC pipe
60
-
-
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
15mm dia CP angle stop cock (Plaza/amber )
26
-
-
15mm dia CP long body bib cock (Plaza/amber )
12
-
-
15mm dia CP two way bib cock ( (Plaza/amber )
12
-
-
25mm dia CP Health Faucet (Plaza/amber)
12
-
-
25mm dia brass full way valve (Shakti make)
4
-
-
32mm dia brass full way valve (Shakti make)
4
-
-
15mm CP Extension piece
28
-
-
15mm size C.P. flange
28
-
-
125mm CP grating
14
-
-
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.
10
-
-
Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge
10
-
-
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
35
-
-
Providing all materials, labour, T&P for fitting and fixing of white glazed vitreous china water closet (European pattern) 'P' or 'S' type with cistern & seat cover, wash hand basin of size 650mmx350mm with one pair basin bolt, one no. hinged rail 760mm long & 5 nos. grab rails 600mm long including supply of sutaible PVC wall plug and Brass screws etc. suitable for handicapped toilets in all floor etc. all complete including cost, taxes and conveyance as per specification all complete as per direction of Engineer-in-charge. Make:HINDWARE/CERA. (As per Model-Matrix Set of Hindware)
Matrix set of Hindware
4
-
-
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ashirvad/Supreme)
214.39
-
-
110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)
15
-
-
110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
16
-
-
110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
20
-
-
110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme
10
-
-
110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
10
-
-
110mm U-PVC HR Bend(Ori Plast/Finolex/Supreme Make)
8
-
-
110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make)
8
-
-
110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
8
-
-
110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
8
-
-
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
25mmx600mm long CP towel rail
10
-
-
Towel ring
10
-
-
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.
600mmx125mm plate glass shelf with CP/NP guard rails.
10
-
-
Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
10
-
-
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
Ground floor
3.26
-
-
Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed series to be pre-approved by the Engineer-in-charge )Ceramic tile 60cmx60cm Kajaria super premium
Ceramic tile 60cmx60cm Kajaria super premium
Ground floor
73.79
-
-
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
Ground floor
184.8
-
-
Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 30cmx60cm special plain / printed series to be pre-approved by the Engineer-in-charge )( somany/Kajeria)
Ground floor
184.8
-
-
Hygenic of Toilet (Male & Female& disable friendly Toilet)
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.
20mm dia C-PVC Pipe
20
-
-
25mm dia C-PVC Pipe
25
-
-
32mm dia PVC Pipe
40
-
-
40 mm dia PVC pipe
35
-
-
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
15mm dia CP angle stop cock (Plaza/amber )
42
-
-
15mm dia CP long body bib cock (Plaza/amber )
13
-
-
15mm dia CP two way bib cock ( (Plaza/amber )
13
-
-
25mm dia CP Health Faucet (Plaza/amber)
13
-
-
25mm dia brass full way valve (Shakti make)
15
-
-
32mm dia brass full way valve (Shakti make)
20
-
-
15mm CP Extension piece
28
-
-
15mm size C.P. flange
28
-
-
125mm CP grating
13
-
-
Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 2000 liters capacity PVC water storage tank
1
-
-
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.
10
-
-
Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge
10
-
-
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
40
-
-
Providing all materials, labour, T&P for fitting and fixing of white glazed vitreous china water closet (European pattern) 'P' or 'S' type with cistern & seat cover, wash hand basin of size 650mmx350mm with one pair basin bolt, one no. hinged rail 760mm long & 5 nos. grab rails 600mm long including supply of sutaible PVC wall plug and Brass screws etc. suitable for handicapped toilets in all floor etc. all complete including cost, taxes and conveyance as per specification all complete as per direction of Engineer-in-charge. Make:HINDWARE/CERA. (As per Model-Matrix Set of Hindware)
Matrix set of Hindware
4
-
-
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
580mm size Orissa pan (Hindware/Parryware/Neycer make)
6
-
-
European water closet with 'p' trap plain(Hindware/Parryware/Neycer make)
4
-
-
Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
10
-
-
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal (Hindware/Parryware/Neycer make)with
10
-
-
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ashirvad/Supreme)
109.98
-
-
110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)
16
-
-
110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
16
-
-
110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
17
-
-
110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme
11
-
-
110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
9
-
-
110mm U-PVC HR Bend(Ori Plast/Finolex/Supreme Make)
14
-
-
110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make)
14
-
-
110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
19
-
-
110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
8
-
-
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
25mmx600mm long CP towel rail
8
-
-
Towel ring
8
-
-
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.
600mmx125mm plate glass shelf with CP/NP guard rails.
8
-
-
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
600mmx450mm size B.E mirror (swivelled type)
8
-
-
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
CP soap holder
8
-
-
Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.
½” x 5” CP Shower (Plaza Deluxe Make)
8
-
-
Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
20
-
-
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , Fly Ash brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge
Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
8
-
-
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
Ground floor
6.27
-
-
Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed series to be pre-approved by the Engineer-in-charge )Ceramic tile 60cmx60cm Kajaria super premium
Ceramic tile 60cmx60cm Kajaria super premium
Ground floor
134.66
-
-
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
318.78
-
-
Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 30cmx60cm special plain / printed series to be pre-approved by the Engineer-in-charge )( somany/Kajeria)
Ground floor
318.78
-
-
Supplying all materials.labour.T&P and providing brick work in foundation and plinth with Fly ash bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:4 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge.
55.71
-
-
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
117.6
-
-
Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.
6.65
-
-
Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
0.53
-
-
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 120 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 120 liter's along with 3 noa of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge
Aqua guard pure Chill 120 PSS UV
2
-
-
Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.
24.75
-
-
Factory made Solid WPC door frame of size 95mmx55mm fabricated. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge
77.25
-
-
Dismantling flat & pan tiled roofing ( floor Tiles only) including stacking the useful materials for reuse and removing the debris within 50m lead
134.65
-
-
Dismantling reepers under wall tiled roof (pan, flat or nuria tiles) after careful removal of nails including stacking the useful materials for reuse and removing the debris within 50m lead
318.78
-
-
Supplying all materials,labour,T&P and dismantling the damaged European water closet or Anglo Indian water closet and removing the debris at a safe distance as per direction of the Engineer in charge
10
-
-
Removing of sludge from septic tank and disposing them at a suitable distance place by engaging swwage cess pool through biring.Sewage cess pool.
10
-
-
Supplying all materials, labour, T&P and cleaning choked inspection chamber/man hole chamber/sewer line/septic tank by engaging sweeper using bamboo and disposing sewage at a safe distance all complete as per direction of the Engineer in charge
10
-
-
Rain Water Harvesting System
Supplying all materials, labour, T&P and fitting and fixing U-PVC, SWR soil waste ventilating pipes and fitting of the following outside diameter conforming to 13592/1992 to walls with nails bobbins and wooden plugs or laying in trenches including with supply of approved rubber lubricant by non-heat application method as per manufactures specification testing earth work in excavation in all kinds of soil and refilling of trenches all complete as per specification and direction of the Engineer in charge.
110mm U-PVC SWR Pipe
188.64
-
-
110mm U-PVC Plain bend
35
-
-
110mm U-PVC Plain tee
35
-
-
110mm dia GI clamp
20
-
-
125mm dia CP grating
20
-
-
Supplying all materials labor T&P and binding glazed stone ware pipes and aligning to requisite gradient inside the trench to jointing with tarred cascade and cement motor prop.(1:1 )encasing the pipe all around with CC(1:3:6) with washed gravel CC(1:4:8) with hard stone metal size 25mm to 50mm on bed on the trench lowering the pipe to bed on trenches in earth work in excavation trenches in all kinds of soil and refilling the same in 30mm layers watering ramming and removal of surplus earth disorient sewer line including use of T&P sight rails binding rods plug lights etc .all complete as per P.H .Specification. All round concrete encasing up to 1.50metre depth. 160mm dia P.V.C.all round concrete pipe
61.64
-
-
Supplying all materials labour T&P and constructing 1.80m dia x 2.60 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
6
-
-
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge
Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
6
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements