Works Department Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Works Department - EICCL Tender
Civil And Construction
Building Construction
Eprocure
Opening Date24 Jan 2022
Closing Date7 Feb 2022
Tender Amount₹ 3,01,11,593
Costs
EMD
Refer DocumentsDocument Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_EICCL_75931_18Bid Award Id
ViewTender No
CCE.Ctc.(RandB)34/2021-22Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Cement concrete (1:2:4) in foundation and plinth using 12mm size hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete watering, curing etc, complete to required levels laid in layers to required thickness including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge
6.03
-
6466.9
... More
Fly Ash Bricks masonry (25cmx12cmx8cm) having crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before use in Foundation and Plinth for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc. complete along with testing of strength as per relevant I.S.standard andas per specification & direction of Engineer-in-charge. Ground floor
170.79
-
4844.95
... More
Fly Ash Bricks masonry (25cmx12cmx8cm) having crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before use in Superstructure and for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc. complete along with testing of strength as per relevant I.S.standard andas per specification & direction of Engineer-in-charge. Ground floor
150.36
-
4878.28
... More
1st floor
92.29
-
5143.16
... More
2nd floor
11.63
-
5447.79
... More
Fly Ash Bricks masonry (25cmx12cmx8cm) having crushing strength not less than 75Kg/sqcm in cement mortar (1:4) after immersing the bricks for six hours in water before use in Superstructure and for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc. complete along with testing of strength as per relevant I.S.standard andas per specification & direction of Engineer-in-charge. Ground floor
56.04
-
5094.01
... More
1st floor
5.85
-
5358.89
... More
Construction of single under reamed bored compaction pile foundation of 300mm dia and 10.00m long with RCC M-20 using crushed broken hard granite chips of 20mmand down graded with required design with cost conveyance taxes cost of all materials and labour etc complete as per specification and direction of Engineer in charge
294
-
9062.41
... More
RCC work of M-20 grade with 20mm and down graded size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts including frame works including cost, conveyance, cost of all labour, T&P, cost of all materials etc. complete as per direction and specification of Engineer-in-charge. Column & Roof beam.
64.32
-
11187.47
... More
1st floor
47.37
-
12443.09
... More
2nd floor
2.83
-
13945.67
... More
Pile cap
181.12
-
5480.34
... More
Plinth Beam
28.97
-
5835.17
... More
Lintel GF
16.43
-
9006.49
... More
1st floor
10.72
-
9825.97
... More
Chajja GF
68.48
-
817.14
... More
1st floor
47.78
-
916.74
... More
2nd floor
3.77
-
1036
... More
Shelves GF
176.05
-
710.57
... More
1st floor
185.06
-
808.5
... More
Roofslab GF
89.86
-
9608.27
... More
1st floor
63.85
-
10548.05
... More
2nd floor
3.55
-
11671.59
... More
Staircase GF
2.9
-
10706.31
... More
1st floor
2.9
-
11865.68
... More
RCC work of M-20 grade with 20mm and down graded size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts including frame works including cost, conveyance, cost of all labour, T&P, cost of a
43.92
-
5328.27
... More
Cutting, straightening coiled or bent up M.S. Rod or tor steel using SAIL/RINL/TATA/JINDAL STEEL/ SHYAM STEEL including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge Ground floor
699.88
-
8488.41
... More
1st floor
166.95
-
8512.06
... More
2nd floor
8.2
-
8535.7
... More
Providing 16mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to outside surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge(Ground floor)
1776.4
-
204.29
... More
1st floor
1327.36
-
209.18
... More
2nd floor
140.68
-
214.07
... More
Providing 2.5cm thick grading concrete of prop.(1:2:2) using 6mm size H.G. chips of approved quality & from approved quarry including watering, curing with cost, conveyances, taxes of all materials, cost of all labour, T&P required for the work etc. comp GF
214.52
-
307.01
... More
1st floor
510.79
-
334.88
... More
2nd floor
28.38
-
366.92
... More
Providing 12mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to outside surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge(Ground floor)
912.87
-
144.1
... More
1st floor
609.19
-
149.59
... More
2nd floor
60.86
-
155.09
... More
Providing 6mm thick cement plaster in cement mortar (1:4) in all floors finished smooth to outside surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge GF
1266.39
-
157.76
... More
1st floor
808.73
-
161.61
... More
2nd floor
41.42
-
165.45
... More
Providing fitting and fixing of dressed,rubbed and polished Kota tiles in floors of approved size over 20mm thick bed of cement mortar(1:4) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge GF
600.73
-
749.74
... More
1st floor
438.61
-
759.52
... More
2nd floor
6.46
-
769.79
... More
Providing fitting and fixing of dressed,rubbed and polished Kota tiles in dadoos and skirting and riser of steps of approved size over 12mm thick bed of cement mortar(1:3) jointed with neat cement slurry mixed with pigment to match the sades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge GF
78.58
-
858.69
... More
1st floor
55.08
-
873.42
... More
2nd floor
1.73
-
888.15
... More
Fixing of Chequred tiles on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles etc. (Data for 10 sq.mt.)
120.6
-
499.15
... More
Providing fitting and fixing of Vetrified industrial floor tiles in floors of approved make of size (300x300)mm confirming to IS:4457 over 20mm thick bed of cement mortar(1:4) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge GF
30.14
-
852.65
... More
Supplying, fitting & fixing in all floors of M.S.grills gate in doors and windows with top rails, steel windows, critical frames for windows balustrades of stair case and parapet railing made out of M.S.square bar/flat as per approved drawing and design including making holes in walls and RCC structure, wood work etc and making good to the damages to walls with cement concrete(1:2:4) with hard crusher broken granite stone chips of 12mm to 20mm size(20mm size not to exceed 25%) of approved quality with cost of all materials labour, cost of welding all T&P, sundreis etc complete in all respect as per specification and direction of Engineer in charge(screws and other hardward required materials to be used in the work shall be of approved quality and specification and shall have to be supplied by the contractor at his own cost (Collapsible gate)
459.6
-
67.3
... More
Grill
486.75
-
57.57
... More
Window grill
486.75
-
11.75
... More
Supplying, fitting, fixing of G.I. Pressed steel doors with polymeric powder coated including cost of all fittings, cost of all labour, materials T&P etc. complete.
95.64
-
6500
... More
Supplying, fitting, fixing of G.I. Pressed windows with grill with polymeric powder coated including cost of all fittings, cost of all labour, materials T&P etc. complete.
157.8
-
6800
... More
Supplying, fitting, fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD.) Ventilator / Top Hung - 60 - Series duly manufactured using UPVC reinforced profiles of 60mm x 55mm x 2.5mm for outer frames, 75mm x 60mm x 2.25mm for casement window sash profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefabricated & welded through fusion welding the window sash shall be fitted with 6mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site etc. including cost and conveyance of all materials, accessiries, labour charges, materials and product conforming to ASTM D 638-14, EN-477-95 and other applicable codes and standards etc. complete as per direction in chargee Engineer-In-Charge.
19.47
-
7115
... More
Providing fitting in expansion joint including cost of all materials labour tap etc completion all respects .
48.85
-
2000
... More
Providing 25 mm thick expantion joint including cost of all charges etc complete.
17.5
-
1288.39
... More
Supplying,fitting & fixing of rain water spout using 100mm dia PVC pipe as per technical specifications (Including cutting hole in brick massonary & fixing the pipe with CM (1:4) including all cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge.
79.88
-
382.72
... More
Providing and applying of Post construction Anti-termite treatment by drilling 12mm dia. holes at distance of 30cm @ junction of wall and floor about 300mm aprt deep enogh to reach the soil below and chemical emulsion (PREMISE, IMIDACHLOPRIED 30.5SC OF BAYER MAKE mixed with 47.5 ltr water) pumped these holes to soak the soil @ 1 ltr soulation of each hole as per manufactures specification and the holes should be pluged with filling materials including cost of all material, labour conveyance and hiring charges of machinaries all taxes as per direction of EIC.
846.43
-
15
... More
Distempering two coats with any approved shade and quality with oil bound distemper over a coat of primer in interior surface of walls up to any height & in all floors to give an even shade including cost, conveyance, taxes of all materials with labour, T&P required for the work complete in all respect as per direction of the Engineer-in-charge GF
2895.56
-
122.4
... More
1st floor
2200.3
-
125.4
... More
2nd floor
158.75
-
128.5
... More
Painting two coats with anti-fungal resistance Weather Seal Coat over a coat of primer of approved shade upto any height by means of brush to outside surface of walls after cleaning the surface including watering, curring etc. complete in all floors including cost, conveyance, taxes of all materials, labours sundries T&P required for the work as per specification and direction of Engineer in charge Ground floor
1060.1
-
129.6
... More
1st floor
715.8
-
134.7
... More
2nd floor
84.21
-
140
... More
Painting two coats with approved Synthetic enamel paints of approved colour, shade over a coat of primer in wood/iron work including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour TandP etc complete as per specification and direction of Engineer in charge GF
5.75
-
189
... More
Providing, Fitting & Fixing of Stainless steel of 304 grade in hand railing of 50mm outer diameter of 2mm thick of approved Quality & Specification with balustrade of size 32mmX32mmX2mm square pipes in rows including Cost of all Materials, Labour for fabrication, buffing & polishing, cost of all fixtures etc. Complete and as per specification & direction of Engineer-in-charge.
425.07
-
333.97
... More
Filling foundation trench and plinth with with excavated earth well water and rammed in layers not exceeding 23cm in depth with all all leads and lifts including cost conveyance taxes cost of all materials and labour etc complete as per specification and direction of Engineer in charge
164.94
-
104.9
... More
E.I. Works:-Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5Amp, 250V Modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size, MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/HPL)
Group A L.P.-28F.P-
28
-
580
... More
Group-B L.P.-30
30
-
812
... More
Group-C L.P-.150 F.P-77 E.F.P-14
241
-
1103
... More
Supply and fixing of 6 Amp plug with 6 Amp switch on existing board (Modular type/cover including connection etc. as required )Make-Anchor Roma/L&T/Crabtree/Legrand)
40
-
351
... More
Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6Amp & 6Amp socket outlet and 6Amp Modular switches connection (make-Anchor Roma/ Legrand /L & T/ Crabtree)
112
-
623
... More
Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6Amp & 16Amp socket outlet and 16Amp Modular switches connection (make-Anchor Roma/ Legrand /L & T/ Crabtree)
4
-
684
... More
Wiring for twin control light point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ofISI marked in recess PVC conduit with 2 way piano type switch with ISI marked, phenolic laminated sheetsuitable size ISI marked G.I. box(18 SWG) and earthing point with 1.5 sq.mm FR PVC insulated single coremultistrand copper conductor for loop earthing etc as required. ( Make of wire -Finolex / L&T / Anchor / Havels /
4
-
566
... More
Wiring in PVC conduit with modular switch and socket for computer board (4 Nos modular switch and socket)
2
-
2083
... More
Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required.(Make of wire-Finolex/L&T/Anchor/Havells/V-Guard//HPL)2 X 1.5 sq.mm +1 X 1.5 sq.mm 20 mm dia. Conduit Extra Lead
482
-
130
... More
2 X 2.5sq.mm +1 X 1.5 sq.mm in 20 mm dia. Conduit from MCB to switch board
605
-
144
... More
2 X4 sq.mm +1 X 1.5 sq.mm in 20 mm dia. Conduit to AC point
120
-
162
... More
2 X 6 sq.mm +1 X2.5sq.mm -do-
320
-
193
... More
S/F of Bakelite angle holder/pendant holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose .
48
-
9
... More
8 way, DD DB
9
-
1904
... More
Supply and fixing of 5Amp.to 32 amp.rating 240V?415V "B" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testingand commissioning etc. ( Make-Legrand DX3/Scnider Act 9/L&T) 40Amp.DP MCB C series
9
-
1074
... More
10-32 amp SP MCB C series
54
-
249
... More
Supply , installation , testing and commissioning of 350 Amp INDOOR pannel board with danger board with danger board. 16/18 SWG pannel box 54"X 48" X 12 size for single door made out of CR sheet of 16SWG and boarder angle frame to provide above pannel with proper space ,hinged door must be painted one coated red oxide and two coat enamel gray paint with powder coats.
31104
-
1.51
... More
Supply and fixing of internal wiring to equipment installed in the pannel board with required size of copper multistrand single core cables duly crimped with copper lugs and all connections L X B including cost of copper conductor and other fittings.
2592
-
0.87
... More
S/F of bus bar 50 x 6 mm with required size of insulating material and nut and Bolts
4
-
821
... More
S/F of 125 Amp MCCB FP 35KA( Make-L&T/ Legrand/Schnider)for incomming
1
-
10480
... More
S/F of bus bar 25 x 3 mm with required size of insulating material and nut and Bolts
2
-
578
... More
40Amp.DP MCB C series
9
-
8218
... More
S/Fof Indicator lamp with toggler switch and fuse
9
-
242
... More
S/F of C.T coil upto 400Amp. Including all connections
4
-
860
... More
Installation, testing and commissioning of above MCCB pannel board with danger board
1
-
4000
... More
S/F of Copper plate Earthing complete in all respect as per specification of SR 2011 and as per Direction of Engineer-in -Chage as per Govt. Spcn.
2
-
4930
... More
Salt, Charcoal for used for Copper plate Earthing
2
-
682
... More
Providing and Laying of 25mmx5mm copper earth strip in recess for connection of earthing as required
20
-
484
... More
Supply and fixing of A.C Ceiling fan 48" size. (Make-Usha-Striker/Orient PSPO Summer cool Breeze/Havels velocity)
75
-
2277
... More
Fixing of A.C Ceiling fan
75
-
127
... More
S/F of electronic step type modular Fan Regulator capacitor control ISI Marked with all connection complete in all respect as per direction of Engineer in charge(Make-Usha/Anchor/Cona)
75
-
328
... More
Installation ,Testingand Commissioning of Ceiling fan,including wiring the down rods of standard length ( upto 30mm) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor including providing and fixing phenolic laminated sheet steel cover on the fan box etc as required etc as required.
75
-
170
... More
Supply and fixing of Fan Hook.
75
-
40
... More
Supply of Exhaust fan 12" size (Make -Orient spring Air/Usha Turbo LD Jet Delux/ Havells Ventil Air DSP/Crompton Trans Air 12")
14
-
1565
... More
Installation ,Testing and Commissioning of Exhaust fan upto450mm sweep in the existing opening including making the hole to suit the size of the above fan, making good the damage complete , connection etc as required.
14
-
554
... More
S/F of 20 Watt LED tube light Fitting(4ft) (Make-Havells/ Philips/ Bajaj/Panasonic)
149
-
455
... More
S/F of 10 Watt LED bulb (Make-Havells/ Philips/ Bajaj/Panasonic)
48
-
156
... More
Supply and Fixing of 60watt LED street Light with GI bracket (make-Havells/Philips/Bajaj/Crompton)
11
-
6871
... More
S/F of Minimax/ Gilpro/Cease fire 6kg. ABC Dry powder type fire Extinguisher
2
-
6800
... More
Supply of 70sq.mmx3.5 core Alluminium Armoured Cable (Make-Glowstar/ Polycab/ Nicco/KEI/HPL/ Mescab)
70
-
940
... More
Laying of cable in ground surface and fixing of one number of PVC insulated and PVC sheathed/ XLPE power cable of 1.1KV grade of size exceeding 35 sq.mm in recessed as required.
68
-
133
... More
Laying of cable on road crossing with 50mm PVC pipe and Concreting
18
-
950
... More
P.H. Works:-Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes conforming to IS:15778 having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00. spacing. This includes Jointing of pipes & fittings with one step CPVC solvent cement and testing of Joints all complete as per specification and direction of the Engineer in charge.
20mm dia CPVC pipe In ground floor 20mm dia C-PVC Pipe
60
-
240.5
... More
25mm dia C-PVC Pipe
40
-
328.8
... More
32mm dia C-PVC Pipe
35
-
496.6
... More
20mm dia C-PVC Pipe 1st floor
45
-
248.5
... More
25mm dia C-PVC Pipe
30
-
336.8
... More
32mm dia C-PVC Pipe
30
-
505.8
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge 25mm dia PVC ASTM-D ( Sch-80)
55
-
184.9
... More
32mm dia PVC ASTM (SCH-80) Pipe
10
-
243.4
... More
40mm dia ASTM ( Sch-80 ) PVC Pipe
120
-
320.2
... More
25mm dia PVC ASTM-D ( Sch-80) !st floor
45
-
190.9
... More
32mm dia PVC ASTM (SCH-80) Pipe
32
-
251
... More
40mm dia ASTM ( Sch-80 ) PVC Pipe
139
-
329.7
... More
25mm dia PVC ASTM-D ( Sch-80) 2nd floor
35
-
196.8
... More
32mm dia PVC ASTM (SCH-80) Pipe
30
-
258.5
... More
40mm dia ASTM ( Sch-80 ) PVC Pipe
205
-
339.3
... More
50mm dia ASTM ( Sch-80 ) PVC Pipe
130
-
421.3
... More
Supplying all materials,labour,T&P and cutting holes through existing brick work including making good the damages in cement mortar(1:4) for taking GI pipes and fittings/PVC pipes and fittings etc.all complete as per PH specification and direction of the Engineer-in-charge. 250mm thick wall
14
-
47.1
... More
250mm thick wall 1st floor
10
-
47.9
... More
Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge In ground floor
7
-
155.5
... More
In first floor
7
-
156.2
... More
Supplying all materials , labour, T&P and cutting grooves in pucca floors and walls for taking P.V.C pipes and G.I fittings etc. and making good the damages including finishing complete as per P.H. specification and direction of Engineer-in-charge. In ground floor
100
-
176.5
... More
In first floor
75
-
181.4
... More
Supplying all materials , labour, T&P and fitting and fixing brass/CP fittings of following nominal bore with supply of all jointing materials complete as per P.H. specification and direction of Engineer-in-charge 15mm C.P.Bib cock(Plaza make/Amber /Aquatic make )
12
-
622.1
... More
15mm C.P.Long Body Bib cock (Plaza make/Amber /Aquatic make )
14
-
693
... More
15mm C.P.Two way Bib cock .(Plaza make/Amber /Aquatic make )
2
-
958.7
... More
15mm dia CP Helth faucet.(Plaza make/Amber /Aquatic make )
2
-
555.6
... More
15mm dia CP Angle Stop cock.(Plaza make/Amber /Aquatic make )
16
-
565
... More
20mm dia CP Concealed Stop cock(Plaza make/Amber /Aquatic make )
18
-
819
... More
25mm dia brass fullway valve(Shakti Make)
5
-
926.1
... More
32mm dia Brass fullway Vave (Shakti make)
5
-
1355.6
... More
40mm dia brass fullway valve(Shakti Make)
5
-
1722.1
... More
50mm dia brass fullway valve(Shakti Make)
2
-
2551.3
... More
15mm dia. C.P extension piece
55
-
59.3
... More
15mm dia. C.P flange
55
-
40.3
... More
125mm dia CP gratting
30
-
82.7
... More
15mm C.P.Pillar cock(Plaza make/Amber /Aquatic make )
15
-
626
... More
Supplying all materials ,labour ,T&P and fitting and fixing CP shower with 15mm or 20mm inlet including polishing etc.all complete as per specification and direction of Engineer-in-charge 15mm CP Revolving shower with shower Arm. (Plaza make/Amber /Aquatic make )
10
-
606.4
... More
Supplying all materials ,labour ,T&P and fixing 10 litres capacity PVC low level flushing cistern with a pair of PVC brackets complete with fittings such as pvc siphonic arrangements, 15mm dia nominal size pvc ball valve with polythene float ,pvc handles, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet , and connecting the inlet pipe with supply main etc.all complete as per specification and direction of Engineer-in-charge 10 ltrs. capacity PVC L.L cistern (Slimline- Deluxe-white-Parryware)
14
-
1486.6
... More
Construction of 15000 Liters Capacity RCC Over head Tank of Inside size- 3.5.00 X 3.00 X1.50m- In 2nd floor.(1nos ) Supplying all materials, labour, T&P and providing cement concrete (1:1½:3)with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
12.64
-
7732.9
... More
Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage.
12.64
-
5285.2
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor. RCC floor roof, chajja etc
27
-
546.7
... More
RCC Beam, Column, wall etc
67
-
986.7
... More
Supplying all materials, labour,T&P and providing 6mm thick cement plasster (1:4) over CC work including watering curring and conveyance of all materials to site.
76.15
-
165
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site.
56.25
-
33.4
... More
Supplying and fitting and fixing stainless steel 34 grade in said rail using 5mm dia 2mm thick circular pipe and lalustrade 32mmx32mmx2mm at the rate of mtr.Center to center and square pipe 32x32x2mm below including welding with stanless steel elect rod and fixing with necessary accessories etc.complete as per direction of the Engineer-in-charge.
60
-
323.7
... More
Providing fitting and fixing MS cover made out of MS angle and sheet duly welding and fixing with frame and hinges along with locking arrangement of size 60cmx60cm etc complete as per direction of Engineer-in-charge
40
-
69.9
... More
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge 2 H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.M.P with outlet dia of 32mm 2 H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.M.P with outlet dia of 32mm
2
-
16625.6
... More
DOL Control panel
2
-
3805.5
... More
40mm dia steel short piece
4
-
202
... More
Well cap
4
-
152.3
... More
50mm size CI bracket
4
-
91.3
... More
2.50sqmm flat cable
180
-
128.1
... More
20mm dia rigid UPVC pipes
180
-
6.9
... More
Steel rope with cover
70
-
26.7
... More
32mm dia HDPE pipe
60
-
99.8
... More
Labour charges for lowering including transportation
2
-
2000
... More
Supplying all materials,labour,T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No.13592/1992 to walls with nails,bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification,testing,earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of Engineer-in-charge 110mm dia U-PVC SWR Pipe (Supreme/Ashirvad)
200
-
453.8
... More
110mm dia U-PVC Door cross Tee
8
-
551.2
... More
110mm dia U-PVC Plain Tee
20
-
322.7
... More
110mm dia U-PVC Door Tee
15
-
386
... More
110mm dia U-PVC Door Bend
16
-
293.6
... More
110mm dia U-PVC Plain Band
15
-
232
... More
110mm dia U-PVC Plain Shoe Bend
15
-
232
... More
110mm dia U-PVC 'P'Trap
40
-
497.3
... More
110mm dia U-PVC Offset without ear
15
-
407.4
... More
110mm dia U-PVC Socket plain
50
-
160.1
... More
110mm dia U-PVC Cowl
10
-
58.2
... More
110mm dia U PVC SWR Clamp
150
-
42.8
... More
Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC / HCI pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge 250mm to 375mm thick wall
45
-
197.6
... More
Supplying all materials, labour, T&P and cutting of R.C.C roof or cornice for taking H.C.I pipes and making good the damages etc all complete as per P.H.Specification and direction of the Engineer in charge.
20
-
155.1
... More
Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
10
-
109.3
... More
Supplying all materials , labour, T&P and fixing Vitreous china water closet ,squatting pan ( Indian type W.C. pan / Orissa pattern squatting pan ) duly embedded in cement concrete 1:5:10 using hard granite metal 4cm nominal size including fixing a pair of vitreous china 250mmx130mmx30mm foot rest, fixing 100mm dia hci 'P' or 'S' trap for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge 580mmx440mm size Orissa Pan(Hind ware/Parryware/ Cera Make)
6
-
2322.5
... More
Supplying all materials,labour,T&P and fitting and fixing vitrous Chaina washed down water Closet (European type water closet - EWC) with integral "P" or "S" type trap to the floor including wodden plug and chromoum plated screw including jointing the trap with soil pipe in CM(1:1) fixing plastic seat cover for washed down water closet with crmium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of Engineer-in-charge. European Water Clost with S trap Plane (Hind ware/Parryware/ Cera Make)
7
-
2621.3
... More
Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge Squatting urinal of size 600mmx350mm (Parryware/ Neycer/ Hindware )
8
-
2860.5
... More
Supplying all materials ,labour ,T&P and fixing wash kitchen sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste , fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc. including cutting holes in walls and making good the damages etc.all complete as per specification and direction of Engineer-in-charge 600x450x250 mm stainless steel kitchen sink with drain board-glossy-IS:13983 - 1994 (Jayna make)
2
-
4892.7
... More
Supplying all materials ,labour ,T&P and fixing Wash basin with hole for pillar taps with cast iron or MS brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. fixing pedestral for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin , fixing 12mm dia CP brass waste etc.all complete as per specification and direction of Engineer-in-charge. 550mmx400mm size wash hand basin with Porcelain pedestal(Hind ware/Parryware/ Cera Make)
4
-
3902.9
... More
Counter top basin 560x455(Hind ware/Parryware/ Cera Make)
14
-
4182.2
... More
Supplying all materials ,labour ,T&P and fixing Mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with chromium plated brass screws and washers etc.all complete as per specification and direction of Engineer-in-charge Mirror(Bevellededge) 600mmx450mm
4
-
657.6
... More
Supplying all materials,labour,T&P and fixing standard sized Glass-shelf with C.P brass bracket and guard rail complete fixed to wooden pluges with screw etc.all complete as per specification and direction of Engineer-in-charge. 600mmx125mm size glass shelf with C.P guard rail
4
-
593.5
... More
Supplying all materials ,labour ,T&P and fixing standard sized CP brass towel rail complete with CP brass brackets fixed to wooden plugs with chromium plated brass screws etc.all complete as per specification and direction of Engineer-in-charge 25mmx600mm long CP Towel rail
11
-
694.9
... More
C P Towel Ring
14
-
462.1
... More
Supplying all materials ,labour ,T&P and fixing CP Soap Holder complete with CP brass brackets fixed to wooden plugs with chromium plated brass screws etc.all complete as per specification and direction of Engineer-in-charge CP soap holder
16
-
175
... More
Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge
23.51
-
706.4
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
5.2
-
4689.4
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
2.62
-
6393.9
... More
In first floor
1.71
-
6694.4
... More
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. In ground floor
222.02
-
155.3
... More
In first floor
153.72
-
158.7
... More
Supplying all materials, labour, T&P and providing brick work with K.B.bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge InGround floor (Super structure )
0.59
-
5136.7
... More
In first floor
0.5
-
5401.6
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork with cement punning and bitumen painting over top of wall including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn first floor In first floor
107.33
-
173
... More
Supplying all materials labour T&P and filling in Sunken floors in toilets with sinter (light weight Slag)well watered and rammed including conveyance of all materials to work site payment of royalty taxes etc all complete as per direction of Engineer in charge In ist floor
3.4
-
555.75
... More
Supply of all materials & laying the waterproofing material of Dr.Fixit torch shield P3160(3mm)with its primer 2 coats or equivalent water proofing material after drying cleaning the concrete surface over the concrete floor/roof/ balcony/sunken and dado upto 1"6" in wall including cleaning,applying and mending as per specification including cost, conveyance, taxes, royalities of all materials to work site etc.all complete as per the direction of the Engineer-in-charge. In first floor
107.33
-
837.7
... More
Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. size 30 x 30 cm Kajaria / Somany / Johnson to be pree approved .In ground floor
54.49
-
911.8
... More
In First floor
36.38
-
921.6
... More
Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge . 30cm x 45cm Kajaria / Somany In ground floor
222.02
-
890.4
... More
In first floor
153.72
-
905.2
... More
Supplying all materials, labour,T&P and providing cement concrete(1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
0.36
-
7086.9
... More
In first floor
0.16
-
7387.3
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge R.C.C floor and roof slabs up to 4.30m height In ground floor
3.69
-
428
... More
In first floor
1.62
-
482
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floorIn ground floor
0.27
-
8236.8
... More
In first floor
0.12
-
8260.4
... More
Supplying all materials, labour, T&P and fixing granite tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge In ground floor
4.88
-
2601.3
... More
In first floor
2.16
-
2616
... More
Supplying all materials, labour, T&P and providing marble slab urinal partition wall including cutting grooves in wall and making good the damages, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge
4.5
-
828.1
... More
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 120 PSS RO+UV of size 750x570x1350mm height with water storage capacity 80 liters along with 2 nos of faucets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge. Aquaguard 120 PSS RO+UV
4
-
101295
... More
Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD) Casement Toilet Door – 60- Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outer frames, 102 mm x 60 mm x 2.25 mm for casement Door Sash Profile and 74 mm x 60 mm x 2.5mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding.The Door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistant accessories like Bathroom locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges. The materials and product confirming to ASTM D 638-14, EN-477-95 and other applicable codes and standards.
41.58
-
8824
... More
Supplying all materials,labour,T&P and laying in trenches ( to level or slope ) unplasticized PVC pipe conforming to IS:4985/2000 of the following outside dia for class-3 (0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/ as per manufactures's providing and laying in trench cement concrete(1:4:8) with 40 mm size hard granite metal in the Type-C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer-in-charge. 110mm dia U-PVC pipe ( Allround concrete )
59
-
1159.5
... More
160mm dia U-PVC pipe ( Allround contrete )
40
-
1908.3
... More
Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge. In side size 250mmx250mm
18
-
1508.9
... More
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge Inside size : 760mmx760mmx460mm
13
-
8865.4
... More
R.C.P.C.Cover(18" round man hole cover)
15
-
1093.1
... More
Supplying all materials ,labour ,T&P and constructing Man Hole Chamber of inside size 910mmx910mmx910mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken black hard granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing, conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge Inside size : 910mmx910mmx910mm
5
-
17341.3
... More
R.C.P.C.Cover(18" round man hole cover)
5
-
1093.1
... More
R.C.P.C.Cover(24" round man hole cover for septic tank )
4
-
1565.5
... More
Supplying all materials, labour, T&P & constructing Soak Way Pit of the following size with dry brick walling from bottom upto invert of inlet pipe and KB brick work in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size crusher broken hard black granite metal on bed, 12mm thick cement plaster in cement mortar (1:4) inside and outside over masonry brick work, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips fitted with iron lifting handles including earth work in open well excavation in all kinds of soil and refilling of cavity around the pit and painting the iron works, watering, curing,cost of all materials,conveyance of all materials to worksite, payment of royalty, all taxes etc. all complete as per approved drawing,PH specification and direction of the Engineer-in- charge. 1.40m dia x 2.00m deep inside size Soakway Pit
4
-
20841.1
... More
Construction 1 nos 100 users RCC Septic tank Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.
32.64
-
204.2
... More
- do - with addl. Depth of 1.5 m
20.67
-
219.2
... More
Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge In ground floor
3.26
-
706.4
... More
Supplying all materials, labour, T&P and providing shoring and shuttering for foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per specification and direction of the Engineer in charge
50
-
235.2
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge. In ground floor
3.26
-
4689.4
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
16.74
-
7086.9
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge For Roof slab
14.61
-
428
... More
For RCC wall
85.56
-
732.4
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
16.74
-
8236.8
... More
Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
70.53
-
189.4
... More
Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge 110mm dia UPVC Tee
2
-
322.7
... More
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
5
-
250.1
... More
Supplying all materials, labour,T&P and providing Vent base in cement concrete(1:2:4) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
1
-
184.5
... More
Supplying all materials, labour, T&P and fitting and fixing UPVC SWR soil waste ventilating pipes and fittings to walls with nails, bobbins and wooden plugs or laying in trenches including earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. 110mm diameter U-PVC SWR pipe
3.6
-
453.8
... More
110mm dia U-PVC Plain shoe bend
2
-
232
... More
110mm dia U-PVC Cowl
2
-
58.2
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge 1 x2 x(6.80+2.6) x 0.30 x 2.40
13.54
-
113.5
... More
Sinking of 150mm x 125 dia tubewell through hand boring (water jet ) method (2nos) .Supplying all materials, labour, T&P and setting up boring equipments including erection of suitable staging for installation of the required size of tube well, dismantling and removing the same after complection of the work, including transportation of the boring equipments, cleaning and levelling the site, excavation of mud pit, channels etc, levelling of site all complete as per direction of Engineer in charge
1
-
12294.5
... More
Supplying all labour, T&P and transporting the boring pipes, top casing , grouting pipes, P.V.C pipes and fittings, P.V.C well screens, cement, bentonite and gravels etc to the worksite including loading and unloading etc all complete as per direction of Engineer in charge
1
-
1320.6
... More
Supplying all labour, T&P and drilling pilot bore not less than 102mm dia, without casing pipes in all kinds of soils and rocks for the following depths excluding supply of necessary boring pipes including supply of necessary cutting equipments, extra sockets (whenever required) etc and withdrawing the boring pipes, washing and keeping the bore clear for logging if required all complete as per direction of Engineer in charge. Drilling pilot bore from 0 to 360 metres
290
-
989
... More
Supplying all labour, T&P and reaming the pilot bore to the following sizes and depths without casing pipes including withdrawing the boring pipes, washing the bore by means of pipe cylinder etc all complete as per direction of Engineer in charge Reaming 100mm to 150mm dia from 0 to 360 metres
290
-
170.7
... More
Reaming 150mm to 200mm dia from 0 to 360 metres
290
-
202.5
... More
Reaming 200 mm to 250mm dia from 0 to 360 metres
290
-
224.3
... More
Supplying all labour, T&P and jointing materials and lowering the 300mm dia top casing pipes into the position and removing the same after use all complete as per direction of Engineer in charge from 0 to 360 metres
1
-
1589.8
... More
Supplying all labour T&P and grouting with cement slurry for saline sealing in the bore around the 150 mm dia PVC casing pipe etc all complete as per the direction of the Engineer in charge.
1
-
5357.4
... More
Supplying all labour, T&P and jointing materials and lowering the pvc casing pipes, fittings and well screens in position, including fitting and fixing of centraliser, cutter plug and washing the bore all complete as per direction of Engineer in charge 150mm dia PVC casing pipe from 0 to 360 metres
40
-
117.5
... More
125mm dia PVC casing pipe from 0 to 360 metres
250
-
43
... More
Cost of 150mm dia PVC ASTM pipe (sch-80)
40
-
1251.4
... More
Cost of 125mm dia PVC ASTM pipe (sch-80)
250
-
781.6
... More
Cost of 125mm dia PVC cutting slut
15
-
250
... More
Cost of 100 mm dia C.I. cutter plug
1
-
350
... More
Cost of bentonite powder
16
-
257.6
... More
Supplying all materials, labour, T&P and packing the bore with washed gravel of river shingles of required size and specification around the well screen and pipe etc all complete as per the direction of the Engineer in charge
2.5
-
1707.4
... More
Supplying all materials, labour, T&P and packing the bore with washed gravel of river shingles of required size and specification around the well screen and pipe etc all complete as per the direction of the Engineer in charge Cost and Conveyance of Gravel
2.5
-
773.5
... More
Supplying all materials, labour, T&P and packing the bore with river sand over the gravel pack etc all complete as per the direction of the Engineer in charge
2.5
-
154.5
... More
Cost and Conveyance of sand
2.5
-
611.77
... More
Supplying all labour T&P and grouting with cement slurry for sanitary sealingin the bore around the upper most 3 metres of 150mm dia PVC casing pipe etc all complete as per the direction of the Engineer in charge.
1
-
1295.1
... More
Cost of Cement
2
-
548.77
... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge By Compressor
1
-
2378.1
... More
Supplying all materials, labour, T&P and constructing Bore well protection chamber of the inside size 650x650x1000hight with cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ash brickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:4) inside and outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.
2
-
10714.4
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements