Works Department Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Technical
Technical
Class Of Bidder
... View More
The class eligibility requirement to bid or participate in this tender is 'A' & Special Class for certain projects, and 'B' & 'A' Class for others.
Bid Capacity
... View More
The bid capacity required in the given tender is calculated using the following formula: Assessed Available Bid Capacity = (A*N*2 - B) Where:
A = Maximum value of works executed in any one year during the last five years (updated to the current price level)
B = Value at current price level of the existing commitments and ongoing works to be completed during the time period stipulated in the contract data
N = Number of years prescribed for completion of the works for which bids are invited Additionally, the escalation factor to be used for the costs of works executed and the financial figures to a common base value for works completed in India is provided, with a base year for calculation of 2024-25. The applicant should indicate actual figures of costs and amounts for the work executed by them without accounting for the above-mentioned factors. In case the financial figures and value of completed works are in foreign currency, the current market exchange rate will be applied for the purpose of conversion of amount in foreign currency into Indian rupees. The information on Existing Commitments as on the date of this bid is to be furnished as per the format in Schedule –G. Total value of Civil Engineering construction work performed in the last five years are to be furnished for which certificate from Chartered Accountant is to be furnished. The bid capacity required in the given tender to bid is the total value of Civil Engineering construction work performed in the last five years with a certificate from a chartered Accountant. Additionally, a statement showing the value of existing commitments and ongoing works till the stipulated period of completion is required in Scheduled –G. However, another part of the information suggests that no specific formula is mentioned for calculating the bid capacity, but rather the total value of Civil Engineering construction work performed in the last five years with a certificate from a chartered Accountant, and a statement showing the value of existing commitments and ongoing works till the stipulated period of completion in Scheduled –G are required. Given the conflicting information, the most accurate formula provided is: Assessed Available Bid Capacity = (A*N*2 - B) Where:
A = Maximum value of works executed in any one year during the last five years (updated to the current price level)
B = Value at current price level of the existing commitments and ongoing works to be completed during the time period stipulated in the contract data
N = Number of years prescribed for completion of the works for which bids are invited
Technical Capacity
... View More
The bidder is required to have prior work experience in similar nature of projects executed during the last five years. The information regarding this experience should be listed, including details such as the name of the employer, location and name of the work, contract price, major items of works, stipulated date of commencement/completion, actual date of completion, and value of work actually executed during the last 5 financial years. The bidder should provide information on the value of civil engineering works executed during the last 5 years. However, specific percentage requirements for similar works completed are not mentioned. The bidder should provide the value of work actually executed during the last 5 financial years for each project. The contract price and the value of work executed can be used to calculate the percentage of work completed, but no specific percentage is required. The bidder should have a certain amount of experience and should have completed a certain value of similar works, but the exact percentage is not specified. The available bid capacity will be calculated based on the maximum value of works executed in any one year during the last five years. The assessed available bid capacity is calculated as (A*N*2-B), where A is the maximum value of works executed, B is the value of existing commitments and ongoing works, and N is the number of years prescribed for completion of the works. The bidder's available bid capacity should be more than the total estimated cost of the works if the amount put to tender is more than Rs. 3.00 crore. The total value of civil engineering construction work performed in the last five years is to be furnished, and a certificate from a Chartered Accountant is required to be furnished for this purpose. The assessed available bid capacity is calculated based on the maximum value of works executed in any one year during the last five years, updated to the current price level using an escalation factor of 10 percent per year. No specific percentage of similar works completed is mentioned. However, the bidder's prior work experience and available bid capacity are considered important factors in determining their eligibility to bid for the works. Values like amount are mentioned, such as Rs. 3.00 crore, but no specific percentage is required. The escalation factors for previous years are also provided, ranging from 1.10 to 1.61.
Costs
EMD
₹ 4,89,300Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_EICCL_110693_8Tender No
CCE.Ctc.(RandB)14/2024-25Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Cement concrete (1:2:4) in foundation and plinth using 12mm size hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete watering, curing etc, complete to required levels laid in layers to required thickness including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge
437.17
7611
3327344.59
... More
Fly Ash Bricks masonry (25cmx12cmx8cm) having crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before use in Foundation and Plinth for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc. complete along with testing of strength as per relevant I.S.standard andas per specification & direction of Engineer-in-charge. Ground floor
139.08
5512
766745.26
... More
Fly Ash Bricks masonry (25cmx12cmx8cm) having crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before use in Superstructure for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc. complete along with testing of strength as per relevant I.S.standard andas per specification & direction of Engineer-in-charge. Ground floor
248.85
5546
1380199.24
... More
1st floor
220.9
5917
1307085.18
... More
2nd floor
136.85
6343
868106.61
... More
3rd floor
35.99
6833
245949.9
... More
Fly Ash Bricks masonry (25cmx12cmx8cm) having crushing strength not less than 75Kg/sqcm in cement mortar (1:4) after immersing the bricks for six hours in water before use in Superstructure for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc. complete along with testing of strength as per relevant I.S.standard andas per specification & direction of Engineer-in-charge. Ground floor
27.63
5752
158952.63
... More
Providing 12mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to outside surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge(Ground floor)
953.14
189
180772.53
... More
1st floor
1356.67
197
267670.99
... More
2nd floor
1362.44
205
279708.93
... More
3rd floor
338.89
213
72424.18
... More
Providing 16mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to inside surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge(Ground floor)
1899.93
272
518509.9
... More
1st floor
1744.25
279
487953.94
... More
2nd floor
1987.53
286
570043.48
... More
3rd floor
342.35
294
100722.79
... More
Providing 6mm thick cement plaster in cement mortar (1:4) in all floors finished smooth to inside ceiling surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge(Ground floor)
701.02
209
146940.8
... More
1st floor
638.67
214
137288.5
... More
2nd floor
437.58
220
96477.64
... More
3rd floor
18.33
226
4145.33
... More
RCC work of M-20 with 20mm and down graded size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts including frame works including cost, conveyance, cost of all labour, T&P, cost of all materials etc. complete as per direction and specification of Engineer-in-charge. Column footing
242.52
6487
1573399.43
... More
Plinth Band
33.5
7353
246358
... More
Column Superstructure GF
29.49
18009
531091.6
... More
1st floor
16.98
20507
348215.48
... More
2nd floor
21.24
23499
499123.22
... More
3rd floor
1.3
27082
35207.29
... More
Lintel GF
16.66
14100
234916.33
... More
1st floor
12.02
15817
190121.18
... More
2nd floor
7.52
17870
134387.96
... More
Roof beam GF
34.15
18009
615014.52
... More
1st floor
31.6
20507
648033.52
... More
2nd floor
22.81
23499
536016.98
... More
3rd floor
1.38
27082
37373.89
... More
Chajja GF
79.34
1228
97432.69
... More
1st floor
71.39
1401
100083.07
... More
2nd floor
63.92
1610
102922.07
... More
3rd floor
2.55
1859
4742.03
... More
Staircase GF
1.95
15506
30237.19
... More
1st floor
1.95
17503
34132.37
... More
2nd floor
1.95
19894
38794.94
... More
Shelves GF
132.98
1059
140941.51
... More
1st floor
107.78
1059
114232.79
... More
2nd floor
107.78
1059
114232.79
... More
Roof slab GF
85.68
13666
1170930.3
... More
1st floor
63.62
15295
973124.52
... More
2nd floor
76.09
17245
1312201.73
... More
3rd floor
2.66
19577
52077.29
... More
Cutting, straightening coiled or bent up M.S. Rod or tor steel using SAIL/RINL/TATA/JINDAL STEEL/ SHYAM STEEL including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge Ground floor
491.43
8771
4310420.99
... More
1st floor
173.97
8803
1531619.7
... More
2nd floor
172.74
8838
1526733.12
... More
3rd floor
7.49
8874
66469.71
... More
Supplying, fitting & fixing in all floors of M.S.grills gate in windows with top rails, steel windows, critical frames for windows balustrades of stair case and parapet railing made out of M.S.square bar/flat as per approved drawing and design including making holes in walls and RCC structure, wood work etc and making good to the damages to walls with cement concrete(1:2:4) with hard crusher broken granite stone chips of 12mm to 20mm size(20mm size not to exceed 25%) of approved quality with cost of all materials labour, cost of welding all T&P, sundreis etc complete in all respect as per specification and direction of Engineer in charge(screws and other hardward required materials to be used in the work shall be of approved quality and specification and shall have to be supplied by the contractor at his own cos
6708.7
68
457332.08
... More
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90 mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc.as per the direction of Engineer-in-Charge
352.8
342
120858.7
... More
Providing fitting fixing of Al door with OEL anodised Al door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 12mm thick prelaminated board fixed on door frame by means of tapered clip No.4660 and the frame to be completed by means of jointing angle No.1855 including all cost of labour, TandP, hire charges of drilling machine, labour charges etc. complete as per specification and direction of Engineer in charge
18.54
7969
147751.56
... More
Supplying fitting and fixing of UPVC (FINESTA/ NCL/VEKALTD casement door 60 series duly manufactured using UPVC reinforced profile of 60mmx55mmx2.5mm for outer frame 102mmx60mmx2.25mm for casement door sash profile and 74mmx60mmx2.5mm mullian profile capable of mounting single glazing system etc complete as per direction and specification of Engineer in charge
113.73
8963
1019361.99
... More
Supplying fitting and fixing of UPVC (FENESTA/ NCL/VEKALTD casement window with top fixed 60 series duly manufactured using UPVC reinforced profile of 60mmx55mmx2.5mm for outer frame 75mmx60mmx2.25mm for casement window sash profile and 74mmx60mmx2.5mm mullian profile capable of mounting single glazing system etc complete as per direction and specification of Engineer in charge
175.5
7586
1331343
... More
Supplying, Providing fitting and fixing of Kota tiles in floors upto 0.1 sqm laid on 25mm thick bed of cement mortar(1:1) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge GF
800.09
864
691397.77
... More
1st floor
656.93
877
576364.1
... More
2nd floor
455.84
891
406258.28
... More
Supplying, Providing fitting and fixing of Kota tiles in dadoes, skirting steps, riser laid on 12mm thick bed of cement mortar(1:3) upto 0.1 sqm jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge GF
125.44
992
124538.09
... More
1st floor
95.99
1012
97207.15
... More
2nd floor
96.18
1033
99407.8
... More
Painting two coats with anti-fungal resistance Weather Seal Coat of approved shade upto any height by means of brush to outside surface of walls after cleaning the surface including watering, curring etc. complete in all floors including cost, conveyance, taxes of all materials, labours sundries T&P required for the work as per specification and direction of Engineer in charge Ground floor
953.14
81
77557
... More
1st floor
1356.67
82
112562.91
... More
2nd floor
1362.44
84
115316.92
... More
3rd floor
338.89
86
29283.48
... More
Priming over the plastered surface with one coat of water bound cement primer of approved quality and make including the cost of all materials, labour, conveyance, taxes, loading, unloading, scaffolding, T&P, etc. all complete as per the direction of Engineer-in-charge GF
3428.65
75
259274.51
... More
1st floor (Inside)
1356.67
78
107054.83
... More
2nd floor
1362.44
82
112196.93
... More
3rd floor
338.89
85
29134.37
... More
1st floor (Outside)
2286.93
77
177420.03
... More
2nd floor
2328.93
79
185406.12
... More
3rd floor
360.68
81
29463.95
... More
Providing and painting two coats of synthetic enamel paint of approved quality, make and shade on Iron / Wood works over one coat of primer including the cost of sand papering, surface polishing, cost of all materials, cost of labour, conveyance, taxes, loading, unloading, scaffolding, T&P, etc. as per direction of Engineer-in-charge.GF
66.56
252
16800.41
... More
1st floor
25.15
259
6515.61
... More
2nd floor
33.14
265
8812.59
... More
3rd floor
2.25
272
614.23
... More
Finishing wall surface with cement based wall putty(water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges, conveyance, taxes of all materials and cost of all labour with TandP etc complete as per specification and direction of Engineer in charge GF
2600.95
89
233669.35
... More
1st floor
2286.93
91
209711.48
... More
2nd floor
2328.93
93
218011.14
... More
Painting two coats with a coat of approved plastic emulsion paint including sand papering, polishing the surface, cost, conveyances of materials and cost of all labour TandP etc complete as per specification and direction of Engineer in charge GF
2475.51
102
254556.69
... More
1st floor
2286.93
104
239990.43
... More
2nd floor
2328.93
107
249544.85
... More
3rd floor
360.68
109
39458.39
... More
Providing 2.5cm thick grading concrete of prop.(1:2:2) using 6mm size H.G. chips of approved quality & from approved quarry including watering, curing with cost, conveyances, taxes of all materials, cost of all labour, T&P required for the work etc. complete as per direction of Engineer-in-charge GF
126.26
383
48371.47
... More
1st floor
34.02
421
14354.74
... More
2nd floor
34.02
466
15874.41
... More
3rd floor
21.25
517
11007.08
... More
Filling foundation trench and plinth with excavated earth well water and rammed in layers not exceeding 23cm in depthG with all all leads and lifts including cost conveyance taxes cost of all materials and labour etc complete as per specification and direction of Engineer in charge
314.72
180
56838.43
... More
Supplying fitting and fixing of Rain water pipe 100mm dia including cost, conveyance, taxes of all materials with labour, T&P required for the work complete in all respect as per direction of the Engineer-in-charge
150
294
44196
... More
Supplying, diluting and preparing Chemical Emulsion like CHLORPYRIPHOS or other chemicals approved by Central Insecticides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as pre-constructional Anti Termite Treatment and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding the pipes and conduits etc. complete at the rate of 7.5 liters (or as directed by the manufacturer) per sqm on vertical and 5.0 liters per sqm on horizontal surfaces, 50% of the emulsion to be filled in the holes made in trenches at 150mm center to center etc.complete as per IS:6313/1981(Part-II) and as per the direction of the Engineer-in-charge including cost of all materials, labour, taxes, etc. complete
516
104
53922
... More
EI Works- Recessed wiring to light point/ fan point/Exhaust fan point/Call bell point with 1.5sqmm FRLS PVC Insulated single core multistarand copperConductor of ISI marked with 20mm dia non metalic PVC conduit with 6A 250V MODULAR type switch ISI marked and ceiling rose marked mounted on Modular GI Box having front modular base plate of suitable size, with 1.5sqmm FR PVC Single core multistrand copper conductor as earth wire includingall accessories and connection as per direction of Engineer in charge (Make of wire Finolex / Havells /Polycab) (PVC Conduit Make: AKG, Sudhakar, Precision) (switch /socket/modular GI Board (Make: legrand (Mylinc)/schneider (clipsal)/hager (Insysta)) light point Group-A
136
670
91120
... More
-do- light point Group-B
55
906
49830
... More
-do- light point Group-C
45
1204
54180
... More
-do- Fan point Group-A
59
670
39530
... More
-do- Fan point Group-B
35
906
31710
... More
-do- Fan point Group-C
20
1204
24080
... More
-do- call bell point Group-C
1
1204
1204
... More
Recessed wiring to 6 AMP Modular socket out let with 2x1.5sq mm for FRLS PVC insulated single core multistrand copper conductor of ISI marked in reccess 20mm dia non metalic PVC conduit Modular GI Box and earthing point with 1x1.5sqmm FR PVC insulated single core multistarnd copper conductor for loop earthing etc,as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / Havells /Polycab) switch /socket/modular GI Board Separate Point (Make: legrand (Mylinc)/schneider (clipsal)/hager (Insysta))
120
595
71400
... More
On Existing board-
65
334
21710
... More
Supply and fixing of Multipurpose board having prov. Of 2Nos 6Amp plug with 6Amp switch on existing board (Modular) (Make: legrand (Mylinc)/schneider (clipsal)/hager (Insysta))
12
1284
15408
... More
S/F of metal Box of 180mm x100 X 60 mm nominal size in recess with suitable size of phenolic laminated sheet cover infront including providing and fixing of 5 pin,15/16 Amp Modular socket out let and 15/16 Amp Modular switch ISI marked connection painting etc as required complete in all respect as per direction of Engineer in charge (Make: legrand (Mylinc)/schneider (clipsal)/hager (Insysta))
4
1084
4336
... More
Recessed Extra lead Sub-main wiring for light and fan point in 2x1.5mm2 FR PVC insulated single core multistrand copper conductor of ISI Marked confirming to IS-694/1990 in 20mm dia nonmetalic heavy duty conduit 1.6 sqmm thick along with 1x1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge(Make of wire Finolex / Havells /Polycab) 2x1.5 sqmm +1x1.5 sqmm 1100 Volts confirming to IS 694/1990
446
131
58426
... More
Recessed wiring to Sub-main in 2x2.5 sqmm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 20mm dia non metalic heavy duty flexible conduct 1.6mm thick along with 1x1.5sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / Havells /Polycab) 2x2.5 sqmm +1x1.5 sqmm 1100 Volts confirming to IS 694/1990
852
145
123540
... More
Recessed wiring to Sub-main in 2x4 sqmm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 20mm dia non metalic heavy duty flexible conduct 1.6mm thick along with 1x1.5sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / Havells /Polycab) 2x4 sq mm+1x1.5 sqmm 1100 Volts confirming to IS 694/1990
70
163
11410
... More
Recessed wiring to Sub-main in 4x6 sqmm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 32mm dia non metalic heavy duty flexible conduct 1.6mm thick along with 2x2.5sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / Havells /Polycab) 4x6 sq mm+2x2.5 sqmm 1100 Volts confirming to IS 694/1990
715
291
208065
... More
Supply of 35mmsq. mm 3 1/2 Core 1.1KV Grade ISI Marked pvc insulated pvc sheathed XLPE Alluminium Armored power Cable (Make of wire Finolex / Havells /Polycab)
30
425
12750
... More
Supply of 70mmsq. mm 3 1/2 Core 1.1KV Grade ISI Marked pvc insulated pvc sheathed XLPE Alluminium Armored power Cable (Make of wire Finolex / Havells /Polycab)
80
764
61120
... More
Laying of up to 150mmsq. mm 3 1/2 Core 1.1KV Grade ISI Marked pvc insulated pvc sheathed XLPE Alluminium Armored power Cable
90
128
11520
... More
S/F of 12 way SPN Double Door MCB Box on existgsurface / wall mounting with all connection complete in all respect as per direction of engineer incharge (Make : Schneider (ACTI 9 ) /legrand/siemens/Hager)
5
3365
16825
... More
S/F of 4 way TPN MCB DB on existgsurface / wall mounting with all connection complete in all respect as per direction of engineer incharge (Make : Schneider (ACTI 9 ) /legrand/siemens/Hager)
10
4978
49780
... More
Supply and fixing of SP 6-32 A, 10 KA rating 240 V "C" series miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand/siemens/Hager)
120
369
44280
... More
Supply and fixing of DP 6-32 A, 10KA rating 240 /415V "C" series miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand/siemens/Hager)
5
1123
5615
... More
Supply and fixing of RCCB FP 25 A rating 240 /415V 30 MA breaker suitable for lighting and other loads in the existing DB ISI marked complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand/siemens/Hager)
10
5386
53860
... More
Supply and fixing of FP 32A, 10 KA rating 415V "C" series miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand/siemens/Hager)
10
2454
24540
... More
Supply and fixing of FP 63A, 10 KA rating 415V "C" series miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider (ACTI 9 ) /legrand/siemens/Hager)
1
3480
3480
... More
S/F of Bakelite Angle holder/Batten Holder of ISI marked in place of ceiling Rose complete in all respect as per direction of Engineer in charge (Make : Cona / Anchor / Havell's)
56
9
504
... More
Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years.. .(With fan Regulator)
93
3724
346332
... More
S/F of 18 inch Heavy duty (Metalic Colour) Exahust Fan with wall cutting, S/F of proper size of hume pipe, concreating, plastaring, painting with all connection testing and commissioning complete in all respect as per direction of Engineer in charge Make:(Orient /Crompton/Almonard/Khaitan/Usha)
2
7035
14070
... More
S/F of 12 inch Heavy duty (Metalic Colour) Exahust Fan with wall cutting, S/F of proper size of hume pipe, concreating, plastaring, painting with all connection testing and commissioning complete in all respect as per direction of Engineer in charge(Make:- Almonard / Usha/Orient/Khaitan,V-guard)
20
3134
62680
... More
S/F of Call Bell /Buzzer ISI marked suitable for AC/Dc single phase 230 V complete .
1
233
233
... More
Supply and fixing of 9 watt,CW/WW 6500K,1800 Lumen led bulb on wall ,making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Panasonic/ Great white/ Havells/ wipro)
20
166
3320
... More
Supply and fixing of 18 watt Surface Light ,making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Panasonic/ Great white/ Orient/ wipro/ Havells/Phillips)(2Years Warranty)
20
2961
59220
... More
Supply and fixing of 20watt,CW/WW 5700K,1800 Lumen led Aluminium Housing batten on wall ,making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Panasonic/ Great white/ Orient/ wipro/ Havells/Phillips)(2Years Warranty)
170
723
122910
... More
S/F of Street light-ENDURA 90W CITYLINER NEO new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover.(Make : Panasonic/ Great white/ Orient/ wipro/ Havells/Phillips)(2Years Warranty)
8
10197
81576
... More
Fixing of Street light with G.I bracket and pipe
8
900
7200
... More
Ac Point with 20A Plug and socket with provision for mounting of 20A SP MCB for flush mounting and surface mounting including SP MCB with all connection complete in all respect as per direction of engineer incharge (Make : Schneider/legrand/siemens/HAGER)
3
3108
9324
... More
Supply and fixing copper plate earthing 600 mm X 600 mm X 3.15 mm thick ISI marked including accessories and providing masonary with charcoal and salt with all connection complete in all respect as per direction of engineer incharge
2
18037
36074
... More
Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing along with existing surface / recessed conduit with all connection complete in all respect as per direction of engineer incharge
20
147
2940
... More
S/F of 63 Amp copper busbar panel of size 28*16*7 inch of 63A 4P MCCB with spreader link AS INCOMER 19*6mm copper busbar, 415V 4strip & internal connection & provision for termination of incomming & out going cable , earthing, Indicator etc,
3
15186
45558
... More
S/F of 125 A cubical panel board made of 16 SWG C.R sheet with powder coated with provision of following items with fabrication erection testing & comissioning of total enclosed panel board of size not less than 36"x48"x12" with (25 X 4 mm ) copper busbar of 250A, 415V 4strip & internal connection & provision for termination of incomming & out going cable , earthing etc, complete with supply & fixing of following switch gears. 1. MFM 2. RYB Indicator 3. SPD 4. 125Amp 16 ka 4P MCCB 5. 100A,16ka 4p Mccb -2nos 8. 63 a 4p 16ka mccb-2 Nos, 9.UV/ov/Earth fault relay for incomer, 100 a changeover ,separete busbar for both dg and main ,earthing connector ,stand, Cable alley.
1
57337
57337
... More
Supply and fixing of 4 pole (3P+N) ( T1+T2 - Iimp 8 kA/pole T2 - 60 kA) 25 KA SPD in existing cubicle panel board including drilling holes in cubcle panel, making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make :legrand/siemens)
1
15259
15259
... More
Supply and fixing of 4 pole MCCB 63-100A,Ics = 100% Icu, 16 KA breaking capacity, adjustableThermal,fixed magnetic type in existing cubicle panel board including drilling holes in cubcle panel, making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make :legrand/siemens)
6
9532
57192
... More
Supply and fixing of 4 pole MCCB 125A,Ics = 100% Icu, 16 KA breaking capacity, adjustableThermal,fixed magnetic type in existing cubicle panel board including drilling holes in cubcle panel, making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make :legrand/siemens)
1
9603
9603
... More
Supply and fixing of Digital Meter Displays Current, line to neutral & line to line Voltages, frequency & Power Factor. (VA & PF - Phase Wise & Average) IEC 62053-21 complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make :legrand/siemens)
1
3879
3879
... More
Supply and fixing of 4 pole 100AMP changeover in existing cubicle panel board including drilling holes in cubcle panel, making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make :legrand/siemens/L&T)
1
7723
7723
... More
Supply and fixing of 2 pole 63AMP changeover in existing cubicle panel board including drilling holes in cubcle panel, making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make :legrand/siemens/L&T)
1
4730
4730
... More
Off-grid Solar:- Supply, fitting and fixing of 545 w Mono PERC Half-cut Solar Panel as per direction of Engineer in charge. (Make: RenewSys/luminous) Warranty: 25 years
18
18574
334332
... More
Supply, fitting and fixing of 10 KVA/120V MPPT Hybrid Solar PCU as per direction of Engineer in charge. (Make:-luminous/Waaree/livfast)
1
143000
143000
... More
Supply, fitting and fixing of 150 Ah C10 Solar Battery as per direction of Engineer in charge. (Make:-luminous/livfast)
10
16864
168640
... More
Supply, fitting and fixing of GI module mounting structure as per direction of Engineer in charge.
18
5200
93600
... More
Supply, fitting and fixing of 3 in1 out DCDB with HRC Fuse, DC MCB and DC SPD as per direction of Engineer in charge. (Make : Schneider (ACTI 9 ) /legrand/siemens/Hager)
1
19500
19500
... More
Supply, fitting and fixing of 1 in1 out ACDB with AC MCB and AC SPD as per direction of Engineer in charge. (Make : Schneider (ACTI 9 ) /legrand/siemens/Hager)
1
21450
21450
... More
Supply, fitting and fixing 4 sq. mm XLPE type Solar DC Cable as per direction of Engineer in charge. (Make-Polycab /Havells/KEI)
190
56
10640
... More
Supply, fitting and fixing 10 sq. mm XLPE type Solar DC Cable as per direction of Engineer in charge. (Make-Polycab /Havells/KEI)
38
157
5966
... More
Supply, fitting and fixing of 4 sq. mm AC Cable for Earthing as per direction of Engineer in charge.(Make-Polycab /Havells/KEI)
62
47
2914
... More
Supply, fitting and fixing of 16 sq. mm AC Cable for solar PCU output as per direction of Engineer in charge. (Make-Polycab /Havells/KEI)
25
195
4875
... More
Supply and Earthing Work (Earthing Electrode, Chemical Backfill Compound, GI Earthing Strip, Pit Cover and Other Accessories) as per direction of Engineer in charge.
4
16949
67796
... More
Testing, Commissioning, PVC conduit pipe, C-clip, Cable tie, PVC tape, Anchor Bolt, Nut, Bolt, MC4 Connector, Civil Work, GI Battery Stand and etc
1
18636
18636
... More
Testing and Commissioning of Off-grid Roof top Solar System
1
25000
25000
... More
Lightning Arrester:- Supply of 8 mm Aluminum Round Conductor.
Tested as per IEC 62561. as per direction of engineer in charge (Make:- Cape/ OBO)
284
149
42316
... More
Supply of Roof conductor holder for parapet- Polyamide
Conductor holder:With M8 female thread or diameter 7mm, M8
Screw to connect the conductor holder.Weather and
temperature resistant from -35 to +90 degree Celsius tested.
Conductor holder @ 1 meter distance.Tested as per IEC 62561. as per direction of engineer in charge (Make:- Cape/ OBO)
305
51
15555
... More
Supply of Polyamide roof cable holder for flat roof:
DIN 48829 Form B1. Closed form with bottom. Filling weight
1Kg (frost-resistant concrete). Sleeve from polyethylene, black
@ 1 meter distance. Tested as per IEC 62561.(Make:- Cape/ OBO)
30
199
5970
... More
Supply of Providing of expansion piece with connector: For equalising temperature related length changes. Necessary on conductors length over 20 meters. For round conductor Rd 8/ALU. Tested for 100kA lightning current.(Make:- Cape/ OBO)
2
263
526
... More
Supply of Connector: For T cross and parallel connectors. Quick
installation using hexagonal bolt M10X30 high-grade hot dip
galvanised. Tested as per IEC 62561.(2nos/expansion piece ).
4
203
812
... More
Supply of Vertical air terminal with accessories:Providing of Air terminals
as per IS-IEC -62305 part-3
Nominal size Ø10/16 mm aluminium rod:
2 Mtr Airterminal: semi-hard (E-AlMgSiO5 corresponds to DIN
48801) Suitable for high wind load.
Tested as per IEC 62561.(Make:- Cape/ OBO)
4
1653
6612
... More
Supply for Providing of Stand for Fang Fix system 16 kg with base and
clamp ,made up of frost resistant concrete and clamp tested
upto 100KA lightning current .(Make:- Cape/ OBO)
4
2460
9840
... More
Supply for Providing of Stand for Fang Fix system 16 kg made up of frost
resistant concrete. (Make:- Cape/ OBO)
8
954
7632
... More
Supply of Test Joint (Folding Clamp) suitable to connect 8mm
round conductor and max by 30x3 mm GI strip as specified in
drawing and directed by Engineer.
Tested for 100kA lightning current.(Make:- Cape/ OBO)
5
380
1900
... More
Supply of IP 66 Poly Propylene Junction Box. Installation at 1Mtr Height
For Test Joint .Internal dimensions: 100x100x48 mm (Make:- Cape/ OBO)
5
277
1385
... More
Supply of Galvanised Steel Flat 30X3 mm thickness from earth
electrode directly in ground as required. Flat conductor Hot
Dipped Galvanized. Tested as per IEC 62561. (Make:- Cape/ OBO)
50
270
13500
... More
Supply for Providing of Cross connector for Flat: Suitable for 30mm
Galvanised steel strip. Installed with 4 nos of hexagonal plate.
Tested for 100kA lightning current. (Make:- Cape/ OBO)
5
252
1260
... More
Supply of flat conductor holder- Fit: FL 30, With mounting hole
6.2 x 22 mm, With 2 cylinder bolts M6 x 16 and over-piece from
hot-dip galvanised steel, Bottom section from polyamide, black.
Tested as per IEC 62561. (Make:- Cape/ OBO)
10
261
2610
... More
Supply for Providing of Plastic Corrosion Protection strip: Approx 1.1 mm
thick. Width 50mm. Made of petrolatum- coated chemical fibre
fabric. (Make:- Cape/ OBO)
1
879
879
... More
Supply of UL Listed maintenance free ,Low carbon copper
coated earth rod of 3 metre electrode having diameter of 17.2
mm with copper coating thickness of 250micron tested as per
IEC 62561-2 (Make:- Cape/ OBO)
5
4183
20915
... More
Supply of universal clamp made of SS to connect rod with flat
conductor (Make:- Cape/ OBO)
5
887
4435
... More
Supply of Earth conductivity enhancing mineral compound shall be of 25
kg/pit tested as per IEC 62561-7,TCLP tested (Make:- Cape/ OBO)
5
2838
14190
... More
Supply of The above arrangements shall be provided with Heavy duty
earth champer of 5000kg load bearing capacity to ensure the
safety of earthing system (Make:- Cape/ OBO)
5
2169
10845
... More
Supply of M10X50 SS Screw and Grip. (Make:- Cape/ OBO)
800
6
4800
... More
Installation of The above arrangements
1
25500
25500
... More
PH woks- Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes conforming to IS:15778 having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00. spacing. This includes Jointing of pipes & fittings with one step CPVC solvent cement and testing of Joints all complete as per specification and direction of the Engineer in charge.
20mm dia CPVC pipe In ground floor 20mm dia C-PVC Pipe
40
273
10936
... More
25mm dia C-PVC Pipe
30
361
10851
... More
32mm dia C-PVC Pipe
20
534
10692
... More
20mm dia C-PVC Pipe 1st floor
35
284
9964.5
... More
25mm dia C-PVC Pipe
25
373
9325
... More
32mm dia C-PVC Pipe
20
547
10952
... More
20mm dia C-PVC Pipe 2nd floor
35
296
10360
... More
25mm dia C-PVC Pipe
25
384
9607.5
... More
32mm dia C-PVC Pipe
20
560
11212
... More
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge 25mm dia PVC ASTM-D ( Sch-80)
35
209
7343
... More
32mm dia PVC ASTM (SCH-80) Pipe
10
273
2735
... More
40mm dia ASTM ( Sch-80 ) PVC Pipe
40
358
14332
... More
25mm dia PVC ASTM-D ( Sch-80)
25
281
7027.5
... More
32mm dia PVC ASTM (SCH-80) Pipe
25
284
7100
... More
40mm dia ASTM ( Sch-80 ) PVC Pipe
40
371
14872
... More
25mm dia PVC ASTM-D ( Sch-80)
25
226
5660
... More
32mm dia PVC ASTM (SCH-80) Pipe
15
294
4419
... More
40mm dia ASTM ( Sch-80 ) PVC Pipe
20
385
7704
... More
25mm dia PVC ASTM-D ( Sch-80)
25
234
5867.5
... More
32mm dia PVC ASTM (SCH-80) Pipe
15
305
4578
... More
40mm dia ASTM ( Sch-80 ) PVC Pipe
40
398
15940
... More
50mm dia ASTM ( Sch-80 ) PVC Pipe
95
493
46882.5
... More
Supplying all materials,labour,T&P and cutting holes through existing brick work including making good the damages in cement mortar(1:4) for taking GI pipes and fittings/PVC pipes and fittings etc.all complete as per PH specification and direction of the Engineer-in-charge. 250mm thick wall
14
63
887.6
... More
250mm thick wall
10
64
646
... More
250mm thick wall
10
65
659
... More
Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge In ground floor
7
213
1493.8
... More
In first floor
7
214
1500.8
... More
In 2nd floor
7
215
1508.5
... More
Supplying all materials , labour, T&P and cutting grooves in pucca floors and walls for taking P.V.C pipes and G.I fittings etc. and making good the damages including finishing complete as per P.H. specification and direction of Engineer-in-charge. In ground floor
90
221
19890
... More
In first floor
80
227
18232
... More
In 2nd floor
80
235
18856
... More
Supplying all materials , labour, T&P and fitting and fixing brass/CP fittings of following nominal bore with supply of all jointing materials complete as per P.H. specification and direction of Engineer-in-charge 15mm C.P.Bib cock(Plaza make/Amber /Aquatic make )
22
622
13686.2
... More
15mm C.P.Long Body Bib cock (Plaza make/Amber /Aquatic make )
23
693
15939
... More
15mm C.P.Two way Bib cock .(Plaza make/Amber /Aquatic make )
2
958
1917.4
... More
15mm dia CP Helth faucet.(Plaza make/Amber /Aquatic make )
2
555
1111.2
... More
15mm dia CP Angle Stop cock.(Plaza make/Amber /Aquatic make )
60
565
33900
... More
20mm dia CP Concealed Stop cock(Plaza make/Amber /Aquatic make )
21
819
17199
... More
25mm dia brass fullway valve(Shakti Make)
6
943
5660.4
... More
32mm dia Brass fullway Vave (Shakti make)
8
1381
11053.6
... More
40mm dia brass fullway valve(Shakti Make)
8
1748
13984.8
... More
50mm dia brass fullway valve(Shakti Make)
10
2577
25773
... More
15mm dia. C.P extension piece
128
59
7590.4
... More
15mm dia. C.P flange
128
40
5158.4
... More
125mm dia CP gratting
62
93
5809.4
... More
15mm C.P.Pillar cock(Plaza make/Amber /Aquatic make )
30
626
18780
... More
Supplying all materials ,labour ,T&P and fitting and fixing CP shower with 15mm or 20mm inlet including polishing etc.all complete as per specification and direction of Engineer-in-charge 15mm CP Revolving shower with shower Arm. (Plaza make/Amber /Aquatic make )
21
630
13234.2
... More
Supplying all materials ,labour ,T&P and fixing 10 litres capacity PVC low level flushing cistern with a pair of PVC brackets complete with fittings such as pvc siphonic arrangements, 15mm dia nominal size pvc ball valve with polythene float ,pvc handles, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet , and connecting the inlet pipe with supply main etc.all complete as per specification and direction of Engineer-in-charge 10 ltrs. capacity PVC L.L cistern (Slimline- Deluxe-white-Parryware)
21
1640
34456.8
... More
Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge On the roof of 2nd floor 2000litre capacity water storage tanks
8
42901
343212.8
... More
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge 2 H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.M.P with outlet dia of 32mm 1.5 H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.M.P with outlet dia of 32mm
2
15200
30400
... More
DOL Control panel
2
3805
7611
... More
40mm dia steel short piece
2
152
304.6
... More
Well cap
2
152
304.6
... More
50mm size CI bracket
4
91
365.2
... More
2.50sqmm flat cable
160
128
20496
... More
20mm dia rigid UPVC pipes
80
6
552
... More
Steel rope with cover
70
26
1869
... More
32mm dia HDPE pipe
60
99
5988
... More
Labour charges for lowering including transportation
2
2000
4000
... More
Supplying all materials,labour,T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No.13592/1992 to walls with nails,bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification,testing,earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of Engineer-in-charge 110mm dia U-PVC SWR Pipe (Supreme/Ashirvad)
280.5
493
138426.75
... More
110mm dia U-PVC Door cross Tee
12
551
6614.4
... More
110mm dia U-PVC Plain Tee
20
322
6454
... More
110mm dia U-PVC Door Tee
26
386
10036
... More
110mm dia U-PVC Door Bend
24
293
7046.4
... More
110mm dia U-PVC Plain Band
15
232
3480
... More
110mm dia U-PVC Plain Shoe Bend
15
232
3480
... More
110mm dia U-PVC 'P'Trap
62
497
30832.6
... More
110mm dia U-PVC Offset without ear
15
407
6111
... More
110mm dia U-PVC Socket plain
20
160
3202
... More
110mm dia U-PVC Cowl
10
58
582
... More
110mm dia U PVC SWR Clamp
150
42
6420
... More
Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC / HCI pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge 250mm to 375mm thick wall
55
253
13964.5
... More
Supplying all materials, labour, T&P and cutting of R.C.C roof or cornice for taking H.C.I pipes and making good the damages etc all complete as per P.H.Specification and direction of the Engineer in charge.
20
209
4188
... More
Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
10
148
1481
... More
Supplying all materials , labour, T&P and fixing Vitreous china water closet ,squatting pan ( Indian type W.C. pan / Orissa pattern squatting pan ) duly embedded in cement concrete 1:5:10 using hard granite metal 4cm nominal size including fixing a pair of vitreous china 250mmx130mmx30mm foot rest, fixing 100mm dia hci 'P' or 'S' trap for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge 580mmx440mm size Orissa Pan(Hind ware/Parryware/ Cera Make)
19
2534
48155.5
... More
Supplying all materials,labour,T&P and fitting and fixing vitrous Chaina washed down water Closet (European type water closet - EWC) with integral "P" or "S" type trap to the floor including wodden plug and chromoum plated screw including jointing the trap with soil pipe in CM(1:1) fixing plastic seat cover for washed down water closet with crmium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of Engineer-in-charge. European Water Clost with S trap Plane (Hind ware/Parryware/ Cera Make)
2
2790
5580
... More
Supplying all materials, labour, T&P and fixing bowl pattern urinal of the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge. Stall urinal (Parryware/ Neycer / Hindware make )
6
4631
27790.2
... More
15mm dia urinal spreader
6
286
1719.6
... More
32mm dia C.P. dome waste
6
128
771
... More
Supplying all materials ,labour ,T&P and fixing wash kitchen sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste , fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc. including cutting holes in walls and making good the damages etc.all complete as per specification and direction of Engineer-in-charge 600x450x250 mm stainless steel kitchen sink with drain board-glossy-IS:13983 - 1994 (Jayna make)
2
5063
10127.6
... More
Supplying all materials ,labour ,T&P and fixing Wash basin with hole for pillar taps with cast iron or MS brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. fixing pedestral for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin , fixing 12mm dia CP brass waste etc.all complete as per specification and direction of Engineer-in-charge. 550mmx400mm size wash hand basin with Porcelain pedestal(Hind ware/Parryware/ Cera Make)
3
4107
12323.7
... More
Counter top basin 560x455(Hind ware/Parryware/ Cera Make)
27
4387
118454.4
... More
Supplying all materials ,labour ,T&P and fixing Mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with chromium plated brass screws and washers etc.all complete as per specification and direction of Engineer-in-chargeMirror(Bevellededge) 600mmx450mm
3
759
2278.2
... More
Big size Mirror
18.72
1864
34899.7
... More
Supplying all materials,labour,T&P and fixing standard sized Glass-shelf with C.P brass bracket and guard rail complete fixed to wooden pluges with screw etc.all complete as per specification and direction of Engineer-in-charge. 600mmx125mm size glass shelf with C.P guard rail
8
670
5364
... More
25mmx600mm long CP Towel rail
21
747
15693.3
... More
C P Towel Ring
17
514
8746.5
... More
Supplying all materials ,labour ,T&P and fixing CP Soap Holder complete with CP brass brackets fixed to wooden plugs with chromium plated brass screws etc.all complete as per specification and direction of Engineer-in-charge CP soap holder
20
212
4240
... More
Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge
24.69
1007
24877.64
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
5.49
5598
30733.02
... More
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
2.73
7564
20652.18
... More
In first floor
2.25
7992
17983.13
... More
In 2nd floor
2.25
8484
19089.68
... More
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. In ground floor
209.46
202
42373.76
... More
In first floor
161.41
206
33379.59
... More
In 2nd floor
161.41
211
34154.36
... More
Supplying all materials, labour, T&P and providing brick work with K.B.bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge InGround floor (Super structure )
0.41
6207
2545.2
... More
In first floor
0.38
6578
2499.83
... More
In 2nd floor
0.38
7005
2661.9
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork with cement punning and bitumen painting over top of wall including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn first floor In first floor
79.79
214
17114.96
... More
In 2nd floor
79.79
219
17505.93
... More
Supplying all materials labour T&P and filling in Sunken floors in toilets with sinter (light weight Slag)well watered and rammed including conveyance of all materials to work site payment of royalty taxes etc all complete as per direction of Engineer in charge In ist floor In first floor
13.56
555
7535.97
... More
In 2nd floor
13.56
555
7535.97
... More
Supply of all materials & laying the waterproofing material of Dr.Fixit torch shield P3160(3mm)with its primer 2 coats or equivalent water proofing material after drying cleaning the concrete surface over the concrete floor/roof/ balcony/sunken and dado upto 1"6" in wall including cleaning,applying and mending as per specification including cost, conveyance, taxes, royalities of all materials to work site etc.all complete as per the direction of the Engineer-in-charge. In first floor
79.79
837
66824.13
... More
In 2nd floor
79.79
837
66824.13
... More
Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. size 30 x 30 cm Kajaria / Somany / Johnson to be pree approved .In ground floor
58.89
982
57841.76
... More
In First floor
48.53
995
48311.62
... More
In 2nd Floor
48.53
1009
48981.33
... More
Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge . 30cm x 45cm Kajaria / Somany In ground floor
209.46
997
208873.51
... More
In first floor
161.41
1017
164170.11
... More
In 2nd floor
161.41
1038
167543.58
... More
Supplying all materials, labour,T&P and providing cement concrete(1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
0.51
8250
4207.5
... More
In first floor
0.37
8677
3210.71
... More
In 2nd floor
0.37
9169
3392.68
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge R.C.C floor and roof slabs up to 4.30m height In ground floor
5.19
755
3918.45
... More
In first floor
2.88
829
2389.82
... More
In 2nd floor
2.88
919
2648.45
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor In ground floor
0.38
9376
3563.15
... More
In first floor
0.28
9379
2626.26
... More
In2nd floor
0.28
9413
2635.89
... More
Supplying all materials, labour, T&P and fixing granite tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge In ground floor In Ground floor
6.88
2708
18631.04
... More
In first floor
4.96
2727
13530.38
... More
In 2nd floor
4.96
2748
13634.05
... More
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 80 PSS RO+UV of size 750x570x1350mm height with water storage capacity 80 liters along with 2 nos of faucets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge. Aquaguard 80 PSS RO+UV
3
112242
336726
... More
Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter with FRP frame of size 45x90mm.(Darwaja /Exon Door make)
76.55
5440
416454.97
... More
Supplying all materials,labour,T&P and laying in trenches ( to level or slope ) unplasticized PVC pipe conforming to IS:4985/2000 of the following outside dia for class-3 (0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/ as per manufactures's providing and laying in trench cement concrete(1:4:8) with 40 mm size hard granite metal in the Type-C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer-in-charge. 110mm dia U-PVC pipe ( Allround concrete )
36
1332
47955.6
... More
160mm dia U-PVC pipe ( Allround contrete )
45
2153
96907.5
... More
Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge. In side size 250mmx250mm
18
1821
32781.6
... More
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge Inside size : 760mmx760mmx460mm
8
10988
87904.8
... More
R.C.P.C.Cover(18" round man hole cover)
12
1093
13117.2
... More
Supplying all materials ,labour ,T&P and constructing Man Hole Chamber of inside size 910mmx910mmx910mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken black hard granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing, conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge Inside size : 910mmx910mmx910mm
4
21424
85698
... More
R.C.P.C.Cover(24" round man hole cover for septic tank )
4
1565
6262
... More
Supplying all materials, labour, T&P & constructing Soak Way Pit of the following size with dry brick walling from bottom upto invert of inlet pipe and KB brick work in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size crusher broken hard black granite metal on bed, 12mm thick cement plaster in cement mortar (1:4) inside and outside over masonry brick work, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips fitted with iron lifting handles including earth work in open well excavation in all kinds of soil and refilling of cavity around the pit and painting the iron works, watering, curing,cost of all materials,conveyance of all materials to worksite, payment of royalty, all taxes etc. all complete as per approved drawing,PH specification and direction of the Engineer-in- charge. 1.40m dia x 2.00m deep inside size Soakway Pit
2
25474
50948.2
... More
Construction 2 nos 50 users RCC Septic tank Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.
46.8
293
13712.4
... More
- do - with addl. Depth of 1.5 m
29.64
314
9324.74
... More
Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge In ground floor
4.68
1007
4715.57
... More
Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge In ground floor
4.68
5598
26198.64
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
27.71
8250
228607.5
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge For Roof slab
20.56
755
15522.8
... More
For RCC wall
145.28
1189
172781.5
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
20.78
9376
194847.83
... More
Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
113.44
250
28439.41
... More
Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge 110mm dia UPVC Tee
4
322
1290.8
... More
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
10
289
2893
... More
Supplying all materials, labour,T&P and providing Vent base in cement concrete(1:2:4) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
2
218
437.8
... More
Supplying all materials, labour, T&P and fitting and fixing UPVC SWR soil waste ventilating pipes and fittings to walls with nails, bobbins and wooden plugs or laying in trenches including earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. 110mm diameter U-PVC SWR pipe
3.6
493
1776.6
... More
110mm dia U-PVC Plain shoe bend
2
232
464
... More
110mm dia U-PVC Cowl
2
58
116.4
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge 2 x2 x(6.00+2.1) x 0.30 x 2.40
23.33
162
3798.12
... More
Sinking of 200mmx150 mm dia Tube Well up to 100mtr. Depth.(2nos) Labour for drilling a perfectly vertical bore hole for a specified dia for a specified depth below G.L through consolidated and un-consolidated rocks with down the hole hammer drilling rig or combination drilling rig (1200 cfm/ 300 psi) as required to suit the site condition as per the direction of EIC including use of own rigs with its accessories, T&P & consumables etc. for lowering of 200mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/ PVC casing pipes, if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the Tube Well). Labour for drilling of 200mm dia & 150mm dia bore from '0' mtr. to '75' mtr.
220
782
172172
... More
Providing & lowering the following size PVC pipes (ASTM) with or without slotted pipes as per the necessity from 1.00m above ground level up to required depth and fitting and fixing up in perfectly vertical position, including cutting, threading pipe and slotted pipe and supplying and fixing all jointing materials, T&P etc. complete and keeping the top of the casing pipe threaded including plugging the tube well to prevent entry of foreign materials from above. The cost inclusive of pipes, fittings, labour, consumables, POL, consumables with hire & running charges of machinaries etc. as per specification & direction of EIC. Lowering of 200mm (8'') dia PVC plastic pipes Sch-80 as per ASTM-D-1785/2004 upto required depth.
100
1775
177560
... More
Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment , labour, all consumables, running & hire charges of machinaries etc. all complete as per the direction of the EIC.
2
6586
13172
... More
Supplying all materials, labour, T&P and constructing Bore well protection chamber of the inside size 650x650x1000hight with cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ash brickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:4) inside and outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.
2
13131
26263.4
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements