Works Department Tender

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per Clause 503 of MoSRT&H Specifications for Road & Bridge works (4th Revision)

Providing & Laying 25mm compacted thick S.D.B.C. of grading -2 using crushed stone Gr.-2 materials & 60/70 penetration grade of bitumen preparing preemixed materials with bituminous binder with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per clauses 501 and 508 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost, conveyance, royality & other taxes of materials, cost of labour, machinery, T&P etc complete. as per direction of Engineer-in-charge

Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP - 63:2018.as per direction of Engineer-in-charge

Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 250 gms per Sqm.area,thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level,uniform and free from streaks and holes as per direction of Engineer-in-charge

Providing and erecting Informatory retro-reflectorised sign asper IRC-67-2012 made of class-B retro-reflective sheeting of high intensity prismatic grade sheeting as per ASTMD4956-09 type-III and IVstrictly conformingto clause6.7of IRC67 2012 and vide clause 801.3, fixed over aluminium sheeting,1.5mm thick asper clause 6.5.2 of IRC:672012 or A.C.P(Aluminium Composite Panel) used for signboards with a thermoplastic coreoflow density polythylene(LDPE) between two thick sheets of aliminium with over all thickness of 4mm and aliminium thichness of 0.5mm on both sides supported on mild steel square post 80mmx80mmx3mm,2nos and 3nos horizontal and 1nos vertical extra supporting member of M.Sangle of size 50mmx50mmx6mm firmly fixed to the ground by means properly designed foundation with M-15 grade cement concrete 45cmx45cmx75cm,60 cm below ground level of sperapproved drawing including,cost, conveyance, royality,ofall materials labour,T&P,excavation,curingetc.complete,undersupervision of Engineer-In-Charge. a)80cmx60cm. Size Reectangular (Informatory)

b)Route marker Sign(45cm.x60cm.)

c)90cm.size Equilateral Tringle

d)60cm size circular