Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
Refer DocumentsDocument Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_EICCL_72623_1Bid Award Id
ViewTender No
CCE DKL R and B/08-2021-22Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
(b) Beyond 1.5mtr to 3.00 mtr Depth
362.63
-
222.9
Filling the Foundation and Plinth, Sides of Foundation, etc. with excavated materials (excluding rock), in layers not exceeding 0.225 m in depth including cost of watering, ramming, dressing and levelling the top to proper level & gradient, cost of labour, conveyance, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge.
-
-
-
(a)Ground Floor
978.37
-
115.5
Disposal of surplus/ excavated materials by mechanical means within 5km. Lead away from the site including cost of all labour , T&P complete as per the direction of the Engineer-in-charge.
-
-
-
(a)Ground Floor
600.13
-
151.2
Supplying, diluting and preparing chemical emulsion like Imidacloprid 30.5 % SC or other chemicals approved by Central Insecticides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as Pre-Constructional Anti-termite Treatment confirming to IS 6313 (Part-II) and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding the pipes and conduits etc. at the rate of 7.5 liters per sqm on vertical surface and 5.0 liters per sqm on horizontal surfaces, 50% of the emulsion to be filled in the holes made in trenches at 150mm center to center (or as directed by the manufacturer) including the cost of all materials, cost of all labour, conveyance, loading, unloading, T&P, etc. all complete as per the direction of Engineer-in-Charge.
-
-
-
( The payment shall be made on the basis of actual plinth area of the building at ground floor and vertical faces will not be measured for payment). Note- The contractor shall have to furnish Ten (10) years guarantees to maintain the anti-termite treated area / structure free from termite. In addition to the 10 years guarantee furnished as above, the contractor shall have to furnish ten years (after certificate of final completion) Bank Guarantee Bond issued by any Nationalized Bank executed in favour of the client as directed in the prescribed proforma available in the tender document for an amount of 10% (ten percent) of cost of this item of work.
1541.21
-
104.5
Supplying and Filling with Sand in Foundation and Plinth in layers not exceeding 20 cm in depth, well watered and compact , top surface dressed and levelled to proper level and gradient including cost of all materials , conveyance,, royalties, loading, unloading, cost of all labour, T&P, etc.All compelete as per the dirrection of Engineer-in-charge.
-
-
-
(a)Ground Floor
441.78
-
544.5
PCC WORK:- Providing and lying Plain Cement Concrete of proportion (1:3:6) in foundation & floor using 40 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge.
-
-
-
(a)Ground Floor
168.4
-
4454.3
(a)Beyond 1.5 M to 4.5M Depth
33.88
-
4454.3
RCC WORK :- Providing, lifting, hoisting and laying in position Machine Batched , Machine Mixed and Machine Vibrated Design mix Cement Concrete of M-30 Including the cost of Centering and Shuttering (minimum cement content not less than 407Kg/Cum) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance, loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement.
-
-
-
(A)R.C.C. foundation and footing bases of columns mass concrete pre-cast slab etc.
-
-
-
(a)Ground Floor
226.54
-
5283.6
(B)R.C.C. Plinth Beam
-
-
-
(a)Ground Floor
54.94
-
5652.8
(C)R.C.C. Beams, columns, grider and bressmer etc.
-
-
-
(a)Ground Floor
134.67
-
11057.3
(b)First Floor
44.39
-
12327.5
(C)SecondFloor
29.62
-
13847.5
(D)R.C.C. Floor and Roof slab, landing, balconies, Projecting sun shades and chajjas up to 4.3Mtr. Height.
-
-
-
(a)Ground Floor
99.77
-
9496
(b)First Floor
21.28
-
10453.9
(C)SecondFloor
0.12
-
11599.2
(E)R.C.C. stairs excluding landing but including railing.
-
-
-
(a)Ground Floor
6.84
-
10578.5
(F)R.C.C. Lintel
-
-
-
(a)Ground Floor
4.13
-
8928.9
(b)First Floor
0.11
-
9773.4
(C)SecondFloor
0.63
-
10782.7
(G)R.C.C. walls and fins including attached pillasters.
-
-
-
(a)Second Floor
66.42
-
11725.2
Providing & fixing TOR Fe-500 HYSD Reinforcement bars (SAIL /TATA /RINL/JINDAL/SHYAM) of required diameter and approved quality for Reinforced Cement Concrete work including straightening, cutting, bending, binding, welding(if approved) , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings (BBS) with provision of standard fan hooks including the cost of all materials, cost of all labour, conveyance, loading, unloading, cost of binding wires of 18 to 20 gauge, T&P, etc, all complete as per the direction of Engineer-in-Charge.
Note: (Linear measurements will be taken & quantity will be calculated on standard weight. Lap length of bars & Weight of binding wire will not be considered for measurement and payment).
-
-
-
(a)Ground Floor
600.67
-
8932.1
(b)First Floor
114.56
-
8955.7
(C)SecondFloor
162.11
-
8980.5
BRICK WORK :- Providing and laying Brick Masonry work in Foundation & Plinth using Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in cement mortar (1:6) affter immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge.
-
-
-
(a)Ground Floor
99.72
-
4223.4
Providing and laying Brick masonry work in Superstructure using Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in cement mortar (1:4) for Half Brick Masonry Wall with provisions for 2 nos 6mm dia MS bar at each 4th layer after immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge.
-
-
-
(a)Ground Floor
35.79
-
4473.1
(b)First Floor
4.28
-
4738
(C)Second Floor
0.37
-
5042.6
Providing and laying of Full Brick Masonry work in Superstructure using Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in cement mortar (1:6) affter immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge.
-
-
-
(a)Ground Floor
283.16
-
4256.7
(b)First Floor
123.36
-
4521.6
(C)Second Floor
43.48
-
4826.2
PLINTH PROTECTION :- Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
-
-
-
(a)Ground Floor
90.68
-
285.9
ROOF TREATMENT:- Providing average 25mm thick grading Concrete in C.C ( 1:2:2 ) using 6mm size crusher broken black hard granite chips using 2% water proofing cement compound (Make: BASF/Fosroc/SIKA/MAPEI/MYK) after scraping and cleaning the roof surface and finishing smooth to proper slope and gradient including cost of all materials, conveyance, sundries,T&P watering and curing by ponding water over terrace slab etc. complete as per the direction of the Engineer-in-charge.
-
-
-
(a)First Floor
492.05
-
351.6
TERRACE WATER PROOFING:- Providing and installing two component acrylic modified cementitious waterproofing coating over roof slab after carrying out pond test on roof slab, filling all defects, saturating the surface, mixing the products and then application in 2.0 mm thickness (1.8 Kg / sqm coverage rate for 1.0 mm thickness) in suitable layers complete in all respect, all materials, tools, plant & labour complete in all respect. Density 1850kg/m³ , Mix ratio (Powder to liquid) 3:1 by weight ,Water penetration Din 1048 1.5 Bar no leakage Potlife @ 25°C 2 hours & @ 40°C 30 minutes,Recoatable: 8-12 hours Elongation 42% (air) & 31% (under water),Tensile strength 20 kg/cm2 ,VOC content (HK prod code P10-17) 0.5 g/L including cost of all materials, conveyance, and sundries,T&P, watering and curing by ponding water over terrace slab etc. complete as per the direction of the Engineer-in-charge. (Make:BASF/Fosroc/SIKA/MAPEI/MYK)
-
-
-
(a)First Floor
492.05
-
464.6
Providing 6 mm thick Cement Plaster in Cement Mortar of (1:4) to Ceilings of Roof Slabs, Stairs, Landings, Chajja, Shelves, Columns, Beams and Lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all and royalties, all labour, scaffolding, watering and curing , sundries, T&P etc. complete as per direction of the Engineer-in-charge
-
-
-
(a)Ground Floor
690.56
-
156.4
(b)First Floor
182.42
-
160.3
(C)Second Floor
1.35
-
164.3
Providing 12mm thick cement plaster in cement mortar (1:4) to the surface of half brick masonry wall including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats, bars, etc only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, royalties, cost of all labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge.
-
-
-
(a)Ground Floor
197.26
-
146
Providing 12mm thick Cement Plaster to the Surface of Brick Masonry Wall in Cement Mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge.
-
-
-
(a)Ground Floor
2067.08
-
141.1
(b)First Floor
500.05
-
144.4
(C)Second Floor
667.23
-
147.8
Providing 18mm thick cement plaster on external surfaces of brick surfaces in two coats consisting of under layer 12mm thick in CM 1:6 (1 cement : 6 coarse sand) and top layer of 6mm thick cement plaster 1:4 ( 1 cement : 4 coarse sand) mixed with integral water proofing material of including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge.
-
-
-
(a)Ground Floor
1884.51
-
272.6
(b)First Floor
720.17
-
283.6
(C)Second Floor
703.96
-
295.1
Providing drip course/ groove in plastered surface or moulding to R.C.C. projections including cost of all materials, conveyance, royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge.
-
-
-
(a)In all Floors
832.99
-
31.2
FINISHING WORK :- Supplying and finishing the plastered surface of wall using Cement Based Wall Putty (Water Based) of approved make and quality and finished smooth and even surface to receive the paint including the cost of all materials, cost of all labour, conveyance, , loading, unloading, scaffolding, T&P, etc, all complete as per the direction of Engineer-in-Charge.
(Make: Birla White/J K Wall Putty)
-
-
-
(a)Ground Floor
2937.2
-
72.3
(b)First Floor
1402.64
-
73.6
(C)Second Floor
1372.54
-
75
Providing and applying Two Coats Plastic Emulsion Paint of approved make, quality and shade over a coat of wall primer of approved quality to the internal plastered surfaces including throughly brushing the surface to make free from foreign materials, sand papering, priming including cost of all materials, cost of all labour, conveyance, loading, unloading, scaffolding, staging, watering and curing, T&P etc. complete as per the direction of the Engineer-in-charge.
(Note: Colour & shade to be approved before procurment & use).(Make:Dulux/Nerolac/Berger/Asian Paint)
-
-
-
(a)Ground Floor
2072.06
-
141.4
(b)First Floor
591.26
-
144.5
(C)Second Floor
224.43
-
147.6
Providing & Painting two or more coats with Premium Acrylic Smooth Exterior Paint with Silicon Additives of required shade after preparation of surfaces including brushing the suface to make free from foreign materials, sand papering, Priming, etc. including the cost, conveyance, of all materials, cost of all materials, T&P, etc, all complete as per the direction of Engineer-in-Charge. (Note: Colour & shade to be approved before procurment & use) (Make:Dulux/Nerolac/Berger/Asian Paint)
-
-
-
(a)Ground Floor
1801.66
-
139.6
(b)First Floor
811.38
-
141.6
(C)Second Floor
1148.11
-
144.7
Providing and painting Two Coats of Synthetic Enamel Paint of approved quality, brand and shade over a coat of red oxide primer to Iron Work including cost, conveyance, royalties, , of all materials, cost of all labour, labour cess, T&P etc. required for the work complete as directed by the Engineer-in-Charge. (Note: Colour & shade to be approved before procurment & use).(Make:Dulux/Nerolac/Berger/Asian Paint)
-
-
-
(a)Ground Floor
186.51
-
137.9
(b)First Floor
7.92
-
141.4
Providing and Painting of Epoxy paint (Two or more coats) on steel work at all locations prepared and applied as per manufacturer's ecifications including appropriate priming coat(Red Oxide Zinc Chromate) , preparation of surface, etc. complete as per Direction of E.I.C. (Make:Dulux/Nerolac/Berger/Asian Paint)
-
-
-
(a)Second Floor
940.15
-
203.3
Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre.
-
-
-
The boards are to be fixed to the frame work with joints staggered to avoid through cracks, Galvanised M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each with zinc coating of 120 gms/sqm(both side inclusive)) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.
-
-
-
66mm Overall thickness Partition with 8mm thick Double Skin Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg/ sq.cm, Bending Strength 100 kg./ sq.cm. (Make:Aerolite/Hilux/Aeroceil)
10.46
-
1323
FLOORING WORK :- Providing and laying of 600 mm x 600 mm Matt Finished Vitrified Floor Tiles confirming to IS : 15622 of approved make, quality and colour without any warpage laid over an under layer of 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.
(Note- Sample of tiles shall be approved before procurement and use.) (Make:Somany/Jhonson/RAK/Kajaria)
-
-
-
(a)Ground Floor
351.82
-
965.7
Providing and laying of 600mm x 600mm Non-Skid Ceramic floor tiles confirming to IS : 15622 of approved make, quality and colour without any warpage laid over 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, , royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.
(Note- Sample of tiles shall be approved before procurement and use.)
(Make:Somany/Jhonson/RAK/Kajaria)
-
-
-
(a)Ground Floor
75.99
-
743.3
Providing and laying of Glazed Ceramic Wall Tiles in dado/skirting confirming to IS : 15622 of approved make, quality, colour and size 600mm x 300mm upto required height from floor level fixed over an under layer of 12mm thick bed of cement mortar (1:3) (1 Cement : 3 Coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, , royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.
(Note- Sample of tiles shall be approved before procurement and use.)
(Make:Somany/Jhonson/RAK/Kajaria)
-
-
-
(a)Ground Floor
358.37
-
878.8
Providing & laying granite stone flooring using 20 mm thick granite stone slab of approved quality, colour and size above 0.4 Sqm as per IS 14223 in Stair Treads and Risers over an under layer of 20 mm thick cement mortar (1:4) (1 cement: 4 coarse sand) confirming to IS-1443 including cutting to size, laying and joining with white cement slurry and colouring pigment to match the shade with typical half nosing and cutting grooves etc including cost of all labour, materials, royalties, loading and unloading, conveyance, sundries, watering and curing, etc. complete as per the direction of the Engineer-in-Charge. (Colour: Tan Brown)
(Note- Sample of granite tiles shall be approved before procurement and use.)
-
-
-
(a)Ground Floor
21
-
2471.2
Providing & laying granite stone flooring in Floors and landing using 20 mm thick granite stone slab of approved quality, colour and size above 0.4 Sqm as per IS 14223 laid over an under layer of 20 mm thick cement mortar (1:4) (1 cement: 4 coarse sand) confirming to IS-1443 including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Colour: Tan Brown)
(Note- Sample of granite tiles shall be approved before procurement and use.)
-
-
-
(a)Ground Floor
94.53
-
2431.6
Providing & laying granite stone tiles in dado/skirting using 10mm thick granite stone slab of approved quality, colour and size above 0.4 Sqm as per IS 14223 to proper line, level and slope laid over 12mm thick cement mortar (1: 3) confirming to IS IS-1443 including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with oxlaic acid, machine grinding, mirror polishing including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Colour: Tan Brown)
(Note- Sample of tiles shall be approved before procurement and use.)
-
-
-
(a)Ground Floor
7.15
-
1934.6
ARENA FLOORING :- Supply and Installation of GRADE-2 Maple/Teak Wooden Flooring System (BWF Certified) EN Tested of Hardwood Maple Size: 20mm thick X 57/83 mm Width Tongue & Groove system over 45mm treated Pinewood Sleeper installed at 9"(23 CM) distance with 19mm thick Rubber Pads sanded ,kiln and dried treated with vapour barrier of 6 mil polythylene laid on VDF Flooring, including cost of all materials, cost of all labour, conveyance, loading, unloading, T&P, etc.Complete as per drawing and the direction of the Engineer-in-charge.(VDF Flooring Paid Separately)
-
-
-
(a)In all Floors
581.28
-
7736.1
Supplying and installation of 4.5mm thick (BWF Certified) PVC/YONEX Mat Flooring EN/DN Tested (EN 14904: Shock Absorption= 11%, Vertical Deformation or DIN 18032.2:Force Reduction=11%,Standard Deformation) to be glued /taped on top of the Maple wood flooring including line marking. The cost includes all materials, labour, conveyance, , loading, unloading, T&P, etc. Complete as per drawing and the direction of the Engineer-in-charge.
(Mat Colour -Green for Playing area,Blue for Margin/Run-off area) Warranty: 5 Years
-
-
-
Methodology of Installation of Maple Wood and PVC Mat Flooring: Step – 1: Lay the Polythene Sheet/ Vapour Barrier on top of the Concrete/ RCC - VDF Floor. Step – 2: Nail the Cushion/ Rubber Pads into the Sleepers. Step – 3: 300/350 mm spacing to be maintained between the Wooden Batten/ Sleepers as per Manufacturer's Specification. or Wooden Batten/ Sleepers to be placed 300/350 mm apart as per Manufacturer's Specification. Step – 4: Top Solid Wood (Maple/ Teak) to be Nailed to the Wooden Batten/ Sleepers. Step – 5: Grinding & Sanding to be done for Unfinished Top Wood (Preferably Factory Prefinished Top Wood to be used) Note: No Polish to be used on Wood (that will make the wood slippery) Step – 6: PVC/ Yonex Mat to be glued/taped on top of the wood Step – 7: Line Marking to be done or Pre done at the factory on the Mat.
-
-
-
Note: • Installation of Wooden Sports Flooring with total maximum thickness of 75 mm comprising of Top Solid Wood followed by Pine Wood Runner/ Batten and Rubber/ Cushion Pad. • Total Arena flooring thickness should be of 79/ 79.5/ 80 mm (75 mm Wooden Flooring + 4/4.5/5 mm Yonex mat). • Entire Wooden flooring to be covered with PVC mat. Court/ Line marking will only be done at the Playing Area. • All the product (Wooden + PVC Mat) should be BADMINTON WORLD FEDERATION (BWF) approved. • The product should qualify with the sports properties of applicable EN/ DIN codes.
-
-
-
(a)In all Floors
581.28
-
3123.7
Supply of 7.5 mm thick vinyle sports flooring for gymnasium Anti-Viral activity (human coronavirus 229E) – ISO 21702….99.37% (after 2h00) Anti-bacterial activity (ISO 22196) 99% inhabits growth,synthetic sports surface it consists of wear layer not less than 2mm thick, with double fiber glass grid for sound stability on floor. CXPTM HD double density foam backing with D-MAXTM+ ensuring highest possible resistance to indentation, durability and energy return. Surface treated with protecsol, to reduce skin burn and sanosol treatment for fungistatic and bacteriostatic properties.weight not less than 4.6 kg per sqm Sheet width 1.5 mts, joined with seamless hot welding. Floorings laid with adhesive as per manufacturer’s instruction over existing leveled surface including game lines marking.
-
-
-
Technical Specifications Shock absorption under EN 14808 standard not less than 25% Ball bounce under EN 12235 standards not less than 90% Abrasion resistance as per EN ISO 5470-1 shall be 350 mg. Friction coefficient as per DIN - 18032 0.4 - 0.6,Sound isolation shall be 18 dB. Anti-bacterial activity 99% inhhibits growthThe cost includes all materials, labour, conveyance, , loading, unloading, T&P, etc. Complete as per drawing and the direction of the Engineer-in-charge.
(Vinyle FLooring Colour ,Code & Line Mark Colour: To be approved by architect)
(Make:Freewill/TS Sports/Wilson Sports)
-
-
-
(a)Ground Floors
88.24
-
5800
Providing & installation of Safelock 25 mm interlocking rubber tiles of sizes 50*50 cm with 4.6 kgs weight for gymnasium floor. Safelock is a mix of natural rubber & recycled rubber with Elephant skin pattern. It will be UV resistant & the thicker layer of rubber matting protects the floor as well as the user. It also dampens sound & absorbs shocks.including cost of all materials, labour, conveyance, sundries, T&P, complete as per direction of Engineer-in-Charge. ( Make : FREEWILL/ EBACO /TARKETT/ ARMSTRONG )
-
-
-
(a)In all Floors
9
-
3252.2
Providing and laying 100mm uniform thick 'Tremix / VDF flooring with plain cement concrete of M-30 grade (Minimum cement content 406 Kg/cum) in alternate panels of 4M x 3M using with 20mm and down grade black hard granite crusher broken stone chips including the cost of screed board vibrator, placing of filter mat, top mat,Vacum process, power troweling, brooming, T&P charges including power, loading, unloading and hire charges, making grooves of 6mm wide and 25mm deep @ 1.5 M C/C bothways, filling the joints with approved qunlity sealing compound '' Grade A'' including the cost of all materials, cost of labours, conveyance, , royalty, labour ces, etc., complete as per the specifications and direction of Engineer -in-charge.
-
-
-
(a)Ground Floor
581.28
-
568.1
Built In Joineries :- Providing and fixing 35 mm thick Single Leaf Flush Door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters, teak wood lipping around the edges & paste with 1mm thick laminate on both side of the flush door inclusive of SS Matt Finish 304 Grade 4 No’s Butt Hinges (125mm x67mm x2.5mm), 1 No door closer (40 - 80Kg), 1 Pair of D type Pull Handle (200mm x20 mm), 1 No Aldrop (250mm x 16mm),1 no Door Stopper , 1 No tower Bolt (300mm x10 mm), and 1 No PVC Buffer with SS Screw etc, including the cost of all materials, hardware fittings, cost of all labour, conveyance, loading, unloading, T&P, etc, complete as per the direction of Engineer-in-Charge.
(Make: Flush Door: Greenply/Century/Merino, Laminate: Greenply/Century/Merino Hardware Fittings: Godrej/Dorset/Link/Dorma & Colour: Coffee Brown)
-
-
-
(a)Ground Floor
34.2
-
6525.2
Providing and fixing 35 mm thick Double Leaf Flush Door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters , teak wood lipping around the edges & paste with 1mm thick laminate on both side of the flush door inclussive of SS 304 Grade 8 No’s Butt Hinges (125mm x 67mm x 2.5mm), 2 No door closer (40 - 80Kg), 2 Pair of D type Pull Handle (200mm x20 mm), 1 No Aldrop (300mm x 16mm),2 nos Door Stopper , 2 No tower Bolt (300mm x10 mm), and 2 No PVC Buffer with SS Screw etc including the cost of all materials, hardware fittings, cost of all labour, conveyance, loading, unloading, T&P, etc, complete as per the direction of Engineer-in-Charge.
(Make: Flush Door: Greenply/Century/Merino, Laminate: Greenply/Century/Merino Hardware Fittings: Godrej/Dorset/Link/Dorma & Colour: Coffee Brown)
-
-
-
(a)Ground Floor
20.88
-
8584.2
Providing and fixing 65mm X 125mm factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge.
(Make: WPC Door Frame: Century/Black Cobra/Rajshri Plastiwood,Colour:Coffee Brown)
-
-
-
Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
-
-
-
(a)Ground Floor
192.5
-
720.96
Providing and fixing of 30 mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with SS 304 Grade Matt Finished 3 Nos butt hinges of Size 100mm X 60mm X 2.5mm, 1 No 250mm X 16mm Aldrop,1 No 150mm x16mm tower bolt,2 No 150mm length Door handle with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Make: WPC: Century / Black Cobra / Rajshri Plastiwood, Hardware Fittings: Godrej / Dorset / Link / Dorma, Colour:Coffee Brown)
-
-
-
(a)Ground Floor
25.2
-
4633.1
Providing and fixing of 12mm thick Clear Toughened Glass Frameless Door With Dorma Premium Fittings.Dorma Premium (9111198) Unilite Package BTS 75,UL PT 10 with Cover,UL PT 20 with Cover,UL US 10 Luck with Cover and PT 24,Dorma Premium (9137121) H Type Handle 450mm,12mm Clear Toughened Glass with Cutout and Hole, including the cost of all materials, hardware fittings, cost of all labour, conveyance, loading, unloading, T&P, etc, complete as per the direction of Engineer-in-Charge. (Make:Dorma/Godrej)
-
-
-
(a)In all Floor
4.32
-
11343.2
Providing and fixing 12 mm thick frame less toughened glass partition Dorma Premium (911298) PT 90 Side Connector and PT 80 Glass to glass Connector with Silicone,12mm Clear Toughened Glass with Cutout and Hole,including perimeter sealing of glass to glass joints with silicon sealant ,etc.as per drawing and specification including the cost of all materials ,T&P,etc all complete as per the direction of Engineer-in-Charge.(Make:Dorma/Godrej)
-
-
-
(a)In all Floor
2.16
-
10223.2
Providing vision panel in flush door not exceeding 0.1 sqm (cost of glass excluded) (overall area of door shutter to be measured):
-
-
-
(a)Ground Floor
0.96
-
151
Providing and fixing of metal Hose Cabinet doors as per IS 3614 part-2:1992 for stability and integrity. Pressed Galvanized steel confirming to IS 277 specification. Door tested & Approved from authorized Govt. testing agency for maximum rating of 2hrs. Door frame shall be Double rebate profile of size 139 x 57 mm made out of 1.20mm minimum thick galvanized steel sheet. Provision should be kept for grouting with cement & sand slurry necessary for fire doors on the clear masonry opening. Door leaf should be 44mm thick fully flush double skin door. Door leaf shall be manufacture from 0.8 mm thick galvanized steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be resin bonded honeycomb core. All doors shall be factory prepared and provided with necessary reinforcement for hinges, locks, Door closer, Vision panel , flush bolt . Painting system will be powder coating finished (Make:4c Fire/Steel Tech/ahlada)
-
-
-
(a)Ground Floor
2.16
-
13121.9
Supplying and installing Aluminium System - Fixed windows made out of ALUPURE/WINPLUS/ALTECH/REKLAD make frame dimension of 39mm x 42mm for with corners mechanical joints. Alupure Aluminium Systems are extruded through Nalco Billets with 6063 T6 Grade. With complete wind load calculation as per IS:875(part-3).Almost unlimited choice of colours deu to finishing techniques such as anodising and powder finishing. The system can accomodate Forsted glass with 4/5/6/8/10/12/14/20 & 22mm. The profile manufacturer should have an authorised fabrication partner for windows assembling and installation. The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets,bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside / Outside of MCCOY /Dowcorning or equivalent. OR
-
-
-
Supplying and installing Aluminium System - Openable windows made out of ALUPURE/WINPLUS/ALTECH/REKLAD make frame dimension of 39mm x 62.9mm & Sash dimension of 46mm x 92mm for with corners mechanical joints. Alupure Aluminium Systems are extruded through Nalco Billets with 6063 T6 Grade. With complete wind load calculation as per IS:875(part-3). Almost unlimited choice of colours deu to finishing techniques such as anodising and powder finishing. The system can accomodate Forsted glass with 4/5/6/8/10/12/14/20 & 22mm. The profile manufacturer should have an authorised fabrication partner for windows assembling and installation. The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets,bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent.OR
-
-
-
Supplying and installing Aluminium System - Sliding windows made out of ALUPURE/WINPLUS/ALTECH/REKLAD make frame dimension of 88mm x 40 & Sash dimension of 31mm x 61.5mm for with corners mechanical joints. Alupure Aluminium Systems are extruded through Nalco Billets with 6063 T6 Grade. With complete wind load calculation as per IS:875(part-3). Almost unlimited choice of colours deu to finishing techniques such as anodising and powder finishing. The system can accomodate Forsted glass with 4/5/6/8/10/12/14/20 & 22mm. The profile manufacturer should have an authorised fabrication partner for windows assembling and installation. The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets,bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent.
-
-
-
(a)Ground Floor
51.26
-
9810.7
(ii)Providing and Fixing of 6mm thick Clear toughened glass ncluding cost, conveyance, , transportation of all materials, cost of all labour, sundries, T&P etc. complete as per direction of Engineer in charge.
-
-
-
(a)Ground Floor
0.96
-
763
Supplying, fitting & fixing of M.S. Grill made out of M.S. flats/square bars as per drawing and design fixed in position to proper plumb, including a coat of priming with approved quality metallic primer, materials including cost, conveyance, , transportation of all materials, cost of all labour, sundries, T&P etc. complete as per direction of Engineer in charge.
-
-
-
(a)Ground Floor
2113.38
-
57.57
S.S Railing :- Supplying, fabricating & fixing of polished stainless steel (304 grade) items made out of pipes, angles, flats, plates, hollow tube, square pipe bracing as per approved design and specification, buffing, polishing etc. with cost, conveyance, labour in railing, parapet, staircase, space frame etc required for the work complete in all respect as per direction of Engineer-in-charge.
-
-
-
(a)Ground Floor
900
-
330.7
Prefab Structure, Canopy, Cladding and Structural Glazing :- Structural steel work of grade - Yst 250 in riveted, bolted or welded built up sections, trusses and framed work with cutting, hoisting, fixing in position and applying a priming coat of approved steel primer including cost, conveyance of all materials, all labour, T&P etc complete as per approved design and specification.
29954.92
-
91
Steel work of grade - Yst 250 in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer with welding and bolted with special shaped washers (Hot finished seamless type tubes) including cost, conveyance of all materials, all labour, T&P etc complete as per approved design and specification.
663.6
-
106.8
Supply+ Erection + Transportation of 50mm thick double skin PUF Insulated sandwich Roof Panel having core with Trapezodial sheet in Top & Micro Ribbed Liner Panel sheet in Bottom skin. The PUF panel shall be manufactured on continuous line running on uninterrupted power supply. Panel shall have pre coated GaIvalume sheet on both side of Puf. The pre coated sheet shall be of minimum 550 Mpa steel. The PPGL sheet shall have plastic protective guard film of minimum 25 microns to avoid scratches during transportation. The PU Foam shall be self-extinguishing type confirming to IS 12436.Top Sheet: 0.5mm TCT PPGL RMP AZ-150 sheet with 550 Mpa tensile strength. Bottom Sheet: 0.5mm TCT PPGL RMP AZ-150 sheet with 550 Mpa tensile strength.Including the cost of all materials, hardware fittings, cost of all labour, conveyance,, loading, unloading, T&P, etc, complete as per the direction of Engineer-in-charge. (Make:Kingspan Jindal)
650
-
2675
Flashing Sheet
1000
-
120
Endcap (as per design)
100
-
100
Providing and fixing Glass Reinforced Concrete (G.R.C) Screens in approved size, pattern, design, shadeand thickness of 50mm on frame and design element in 30mm thick have weight approximately between 3.5 – 4 Kg per Sq. Ft. and color of M/S UniStone make or equivalent. The above weight and thickness is considering dimensions of screens up to 2133mm in height and 1219mm in width and having at least 50% void space. The screens should be made from ‘53 grade’ White Portland Cement manufactured by ‘JK Cement’ or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by ‘N.E.G JAPAN’ or equivalent, Super Plasticizers manufactured by ‘BASF’ or equivalent, Polymers manufactured by ‘BASF’ or equivalent and U.V resistant Synthetic inorganic pigments should be used for pigmentation manufactured by ‘BAYFERROX (Germany)’ or equivalent. The material casting should take place in FRP Molds. The fixing of Screens should be ‘Dry fixing’ i.e. to be done with M.S Galvanized Clamps, fixtures and fasteners of Hilti / Fischer. etc complete as per direction of E.I.C.
24
-
5928.7
Providing and fixing Shubhwood WOOD POLYMER COMPOSITE (Profile and Colour as decided by Client / Architect)Plank . This material is produced exclusively by Shubhwood, allowing Subhwood to maintain the high quality of these products. The panels (125 mm x 18mm size) have a texture embossed into the surface to achieve various aesthetics. These textures include brushing, sanding and wooden effect. The profile should be installed on 50mm x 25mm aluminum section of thickness 1.2mm of Hindalco or equivalent aluminum.The item shall be inclusive of the fittings and fabrication costs and the accessories required to do so. It should be resistant to steam and crack, with all necessary fittings including cost of all materials, labour, conveyance, loading unloading, tools and plant,sundries etc all complete as per techinical specification and direction of Engineer in Charge.
15
-
4999.1
STRUCTURAL GLAZING :- Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).
72
-
321.58
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:(a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:
-
-
-
(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.(c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.(d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.
-
-
-
(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge.
-
-
-
The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineerin- Charge.
Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub- head.
-
-
-
However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. up to two decimal places. Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately. The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NABL
accredited lab or by any other accreditation body which operates in accordance
with ISO/ IEC 17011 and accredits labs as per ISO/ IEC 17025.
9.9
-
2701
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick hard coated low emmissivity glass, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc.
all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor.“(Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.26.2)“For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.“ (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light
reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.
9
-
2872.7
Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete
-
-
-
Wheel above 50 mm dia
-
-
-
Ground Floor
2
-
194.4
Providing ,Supplying & Fixing of 80mm dia heavy gauge G.I. Pipe for cow catcher (6.5mX1.5m) including labour for lifting,and placing in position to required length,pre fabricating by cutting to required length,priming including cost of all materials, cost of all labour,loading,unloading at site ,all accessories,T&P required for the work complete in all respect as directed by Engineer in Charge.
-
-
-
Cow-Catcher at entrance Gate
75
-
609.8
Providing Cement Punning including racking out joints,brushing out dust & loose mortar , washing the surfaces with water,making grooves,beads & drip coarse to give ornamental finish as per drawings.
-
-
-
Ground Floor
607.32
-
32
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre
162.25
-
238.7
Excavation in soil using Hydraulic Excavator CK-90 & Tipper with Disposal upto 1000 metres-Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000 metres.
705.15
-
42.39
Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction.
235.05
-
20.73
Construction of granular sub-base by providing close graded Material grade VI, spreading in uniform layers with motor grader on prepared surface,mixing by place in method rotavator at OMC, and compacting with vibratory power roller to achieve the desired density, complete as per clause 501 of MORT&H specification for Road and Bridge work (5th Revision) as per direction of Engineer-in-Charge.
313.4
-
1393.77
Providing and laying 80mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 20 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
1567
-
684.22
Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408
401
-
262.13
Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces as per section 800 of MoRTH specifications for Road & Bridge works (5th revision) and instruction of Engineer in charge
146.37
-
63.46
Landscaping :- Providing and fixing Neelgiri/Mexican grass turf with earthy 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light, watering with sprinkler and maintenance for 30 days or more till the grass establish properly as per direction of officer incharge.
571
-
205.3
Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment).
171.3
-
390.2
Supplying and stacking sludge at site including royalty and carriage upto 5 km complete (sludge measured in stacks will be reduced by 8% for payment).
57.1
-
294
Supplying and stacking at site dump manure from approved source, including carriage upto 5 km complete (manure measured in stacks will be reduced by 8% for payment) .
-
-
-
Screened through sieve of I.S. designation 20 mm
19.03
-
225
Screened through sieve of I.S. designation 16 mm
19.03
-
243.3
Screened through sieve of I.S. designation 4.75 mm
19.03
-
257.9
Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
57.1
-
26.8
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge.
57.1
-
18.3
FURNITURE :- Providing and Placing of Executive Desk of Size 1500 mm x 750 mm x 728 mm as per approved Picture (Make:Godrej/Geeken)
3
-
16102
Providing and Placing of Executive Chair Model Ventilo Mid Back - Black as per approved Picture (Make:Godrej/Geeken)
3
-
5678
Providing and Placing of visitor chair Model–1018 (Black) as per approved Picture (Make:Godrej/Geeken)
8
-
2882
Providing and Placing of Gain Storage 500 - For Athletes 2 door as per approved Picture (Make:Godrej/Geeken)
4
-
19606
Providing and Placing of Wooden Bench (2400 mm long) as per approved Picture (Make:Godrej/Geeken)
6
-
18725
Providing and Placing of dining chair Model–
Unwind ss as per approved Picture (Make:Godrej/Geeken)
4
-
2523
Providing and Placing of 2 Door PLU Lockers 1830Hx380Wx450D as per approved Picture. (Make:Godrej/Geeken)
35
-
9873
Providing and Placing of Dustbin as per approved Picture. (Make:Godrej/Geeken)
10
-
2350
SIGNAGES :- Directional & Fire Exit - Providing and fixing 8mm thick clear acrylic autoglow sheet with vinyl text matching to specified colour, both sideS lettering as approved. Cost to be inclusive of wastage, suspension by means of SS strings, including of all materials, labour, conveyance, sundries, tools and plants etc complete in all respect as per the direction of Engineer-in-charge.
7
-
3300
Fire Signages - Providing and fixing 8mm thick clear acrylic autoglow sheet with vinyl text matching to specified colour, both sideS lettering as approved. Cost to be inclusive of wastage, suspension by means of SS strings including of all materials, labour, conveyance, sundries, tools and plants etc complete in all respect as per the direction of Engineer-in-charge.
10
-
3300
Room Signage
-
-
-
Type - 1, Size - 450mm x 200mm made of 6mm acrylic board + vinyl/PVC sticker with stud including of all materials, labour, conveyance, sundries, tools and plants etc complete in all respect as per the direction of Engineer-in-charge.
19
-
979.2
Outer Signage
-
-
-
SS English Letter of Size 400mm
24
-
1360
SS Odia Letter of Size 300mm
14
-
1020
GYM :- KARIZMA COMMERCIAL MULTI GYM EVOLVE 4 station gym with 2 weight stacks of 72 Kgs each
Exercise Function – Leg press, Leg extension / curl, Chest press, Pec fly / Rear delt, Lat pull, Rowing, Knee raise, Push up stand etc.
Durable powder coated finish
Ergonomic Design / Scientific Biomechanics
Arc cover for protection
(Make:Viva/Cosco/Jordan)
1
-
133875
EVOLVE POWER SQUAT RACK Ergonomically designed with smooth rounded corners for a safe workout environment. High grade Bio Mechanics. Highest grade Steeltubing & Epoxicoating High density, top grade foam provides safety, comfort and stability. For Commercial Use. (Make:Viva/Cosco/Jordan)
1
-
49560
IMPORTED COMMERCIAL MULTI ADJUSTABLE BENCH E 1039 LENGTH : 1620 MM
WIDTH : 760 MM
HEIGHT : 810 MM
TOTAL WEIGHT : 61 KG (Make:Viva/Cosco/Jordan)
1
-
30800
OLYMPIC FLAT BENCH J 023 EVOLVE • Main Frame : Flat oval tube • Cushion : Made of PU • EN ISO 20957-1& EN957-2 approved. For Commercial Use. Size: 1720*1670*1200mm N.W.: 81kg (Make:Viva/Cosco/Jordan)
1
-
40194
Cable Crossover BS-005 • Main Frame : Flat oval tube • EN ISO 20957-1& EN957-2 approved
• Solid Body & Sturdy Steel Frame • Size : 3836x870x2330mm
• Weight Stacks: 100kgs x 2 N.W.: 358KG (Make:Viva/Cosco/Jordan)
1
-
133980
EVOLVE FITNESS JF 1263 3 TIER DUMBBELL RACK Ergonomically designed with smooth rounded corners for a safe workout environment. High grade Bio Mechanics. Highest grade Steeltubing & Epoxicoating High density, top grade foam provides safety, comfort and stability. For Commercial Use. (Make:Viva/Cosco/Jordan)
1
-
34230
evolve- RUBBER COATED SOLID DUMBBELL
* Made of hard-wearing impact resistant rubberised material, It won't release odd smell, It provides a smooth
non-tacky feel. Won't stain hands or cause any rubber deteriorated problems
2.5 x2 pair = 10kg
5 x 2 pair =20 kg
7.5 x2 pair = 30kg
10 x 2pair = 40 kg
12.5 x2 pair = 50 kg
15 x 2pair = 60 kg
17.5 x 2 pair =70 kg
20 x 2 pair = 80 kg
25 x2 pair =100 kg
30 x2 pair = 120kg Total Pairs = 20 pairs
Total Weight = 580 kg (Make:Viva/Cosco/Jordan)
250
-
245
evolve- COLOURED RUBBER COATED OLYMPIC PLATES
* 3 hole easy grip design olympic plates and available in 29mm hole also
* Tear proof, sound less & bouncy effect
2.5 x 2pair =10kg
5 x2 pair =20kg
7.5 x 4pair =60kg
10 x 2pair =40kg
15 x 1pair =30kg
20 x1 pair =40kg
25 x1 pair =50kg
Total Weight = 250 (Make:Viva/Cosco/Jordan)
150
-
192.5
evolve KETTLE BELL DUMBBELL 5kgx 1pair=10
7.5kg x1 pair=15
10kgx1 pair=20
12.5kgx1 pair=25 Total Pairs=4
Total weight=70kg (Make:Viva/Cosco/Jordan)
35
-
210
JF 1264 PLATE TREE Ergonomically designed with smooth rounded corners for a safe workout environment. High grade Bio Mechanics. Highest grade Steeltubing & Epoxicoating High density, top grade foam provides safety, comfort and stability. For Commercial Use. (Make:Viva/Cosco/Jordan)
1
-
14910
Imported POWER TOWER EVOLVE
Contoured arm rests for secure positioning Angled back pad for added comfort. Multiple grip positions for easy chin ups, dips, push ups and leg raise. LXWXH : 132X61X210 CM. (Make:Viva/Cosco/Jordan)
1
-
40250
OLYMPIC BARBELL 20KG
*Heat treatment grip bar
*Max loading : 1000 lbs
*Length : 2.2 mtrs
(Make:Viva/Cosco/Jordan)
3
-
11550
OLYMPIC BARBELL 15KG
*Heat treatment grip bar
*Max loading : 1000 lbs
Lenth : 72"
(Make:Viva/Cosco/Jordan)
3
-
6300
OLYMPIC BARBELL 10KG
*Heat treatment grip bar
*Max loading : 750 lbs
Lenth : 60"
(Make:Viva/Cosco/Jordan)
2
-
5530
OLYMPIC BARBELL 7.5KG
*Heat treatment grip bar
*Max loading : 500 lbs
Lenth : 48"
(Make:Viva/Cosco/Jordan)
2
-
4550
TRAP BAR 20KG (Make:Viva/Cosco/Jordan)
1
-
10325
TRAP BAR10KG (Make:Viva/Cosco/Jordan)
1
-
7350
IR94064 - PLASTIC LOCK JAW (Make:Viva/Cosco/Jordan)
1
-
560
Weighing Scale-Digital EQ-EB-90
Equinox
Capacity 180 Kg
6mm thick tempered glass
2 inch – large LCD display
Auto-step-on feature
Auto off function
Low battery / Overload / Error indicator (Make:Viva/Cosco/Jordan)
1
-
2373
High Measuring Stand-JMS-001 JMS-001 for calibration up to 2 meters high school model high jump stand with T shaped base or round base with painted steel upright calibrated both in inches and cm.JSS -01 for calibration up to 2 meters (Make:Viva/Cosco/Jordan)
1
-
1750
• LED console readouts: incline, time, distance, calories, pulse, speed / rpm, level, watt, fan etc.
• Level Control : 16 resistance levels.
• 14 kgs flywheel.
• Both forward & reverse motions offer various workout options
• Mp3 with speaker • Self Generated system.
• Maximum user weight : 180 kg. (Viva/Cosco/Jordan)
1
-
112000
Commercial Group Bike CFS 4100
Ultra sturdy design.
New fully covered design making it sweat proof.
Adjustable seat and handle.
High quality ribbed belt with tension wheel driving system.
Press type braking system.
Maximum user weight : 150 kg. (Viva/Cosco/Jordan)
2
-
33600
Providing all materials, labour, T&P for fixing of following sizes of bevelled edge mirror of 6mm thick mounted on 6mm thick AC back sheet & CP cup screw with PVC wall plugs in all floor including cost, conveyance, taxes of all materials complete as per specification and direction of E.I.C. ( CERA/Golden fish/ Saint gobain)
28.8
-
3137
SPORTS EQUIPMENTS :- Providing and Fixing of Yonex Make BADMINTON POLE ( Portable & Movable ) 50kg weight on each side Metal pipe 46mm, A very strong and durable portable unit .
2
-
11600
BADMINTON NET ( Tournament Quality )
4
-
750
Badminton racket Vector X
8
-
1800
Nylon Shuttle Cock Tournament Vector X
12
-
50
P.H Work :- Providing all materials, labour, T&P for laying/fixing of following dia CPVC pipes S.D.R-11 as per IS-15778 with ISI mark including fixing of required size CPVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floor or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes,duties,transportation scaffolding etc. as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHIRVAD/AJAYA/AKG,/SUPREME/TRUEFLOW.
-
-
-
50mm dia
46
-
1017
40mm dia
120
-
664
32mm dia
4
-
492
25mm dia
40
-
317
20mm dia
30
-
241
Providing all materials, labour, T&P for laying/ fixing of following dia uPVC pipes Sch-80 as per ASTM-D-1785/2004 including fixing of required size PVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floors or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes, duties, transportation, scaffolding etc. as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHIRVAD/AJAYA/AKG,/SUPREME/TRUEFLOW.
-
-
-
50mm dia for Drinking & Flushing from source to GL
30
-
718
50mm dia for Drinking & Flushing from GL to OH Tank
30
-
675
Providing all materials, labour, T&P for laying/fixing of following dia uPVC Aquasafe pipes as per IS-4985 with ISI mark of 6 kgf/cm2 including fixing of required size uPVC fittings like,bend,Tee,elbow,offsets,etc. and the same fixed on wall or floor with holder bat clamps screw in all floors or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes, duties, transportation, scaffolding etc. as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHIRVAD/AJAYA/AKG,/SUPREME/TRUEFLOW.
-
-
-
50mm dia
33
-
173
Providing all materials labour, T&P for making grooves in bricks/stone masonary walls vertically or horizontally up to required depth and width in all floor for laying of pipes and fittings up to 50mm dia, testing the joints with required water pressure and making good the damages with cement concrete 1:2:4 with 12mm size h.g.c.b.chips and finished smooth with cement morter (1:4) to original shape including cost of materials, curing, conveyance, taxes of all materials etc. all complete as per specification & direction of EIC.
78
-
175
Providing all labour,T&P for cutting holes in bricks or stone masonry wall for taking pipes in all floors and making good the damages with cement concrete 1:2:4 finished smooth with CP 1:4 to original shape including cost of all materials, curing, conveyance, taxes, duties etc. all complete as per specification & direction of Engineer-in-charge.
-
-
-
For 15mm to 50mm dia pipe to pass in 125mm to 250mm thick wall
16
-
49
For 75mm to 150mm dia pipe to pass in 250mm thick wall
15
-
140
Providing all labour,T&P and cutting holes in RCC chajja/roof/floor for taking pipes through and making good the damages with supply of all required materials etc. complete as per the direction of the Engineer-in-charge.
6
-
175
Providing all materials, labour, T&P for fitting & fixing of following Bronze Ball Valves confirming to IS-778 with ISI mark in all floor & fixing with the pipes after cutting the pipes to required shape & size including wastage etc. of following nominal diameter, all complete including testing the joints with required water pressure.The cost inclusive of all taxes,duties,transportation scaffolding etc. all complete as per specification and direction of Engineer-in-charge. Make:ZOLOTO. (As per Art no.1008 & HSN Code-84812000 of ZOLOTO)
-
-
-
25mm dia Bronze ball valve
6
-
1341
40mm dia Bronze ball valve
6
-
3616
50mm dia Bronze ball valve
5
-
5569
32mm dia Bronze ball valve
2
-
2616
50mm dia brontz horizontal check valve
1
-
3099
Providing all materials, labour, T&P for fitting and fixing white glazed vitreous china Wall/Floor mounted water closet Rimless (European pattern)confirming to IS 2556: ART-8-2004 ,with p-22Trap with seat cover (solid) of approved make in all floor including supply of sutaible bracket, PVC wall plug and Brass screws etc. all complete including cost, taxes and conveyance as per specification all complete as per direction of Engineer-in-charge. Make : JAQUAR/HINDWARE/CERA/PARRYWARE.
-
-
-
SLS-WHT-6851S300UFSingle Piece-WC with UF soft closeseat cover, Hinges, Fixing Accessories,Accessories Set and Cistern fittings,Size: 360x725x735 mm, S Trap-300 mm
10
-
21990
Supply all materials and labour for fitting and fixing of following size white glazed vitreous china Half Padestal wash hand basin of approved make in all floor of approved quality including cutting the walls & floor and making good the damages with cement concrete (1:2:4) etc. including all taxes, duties, transportation etc. all complete as per direction of EIC. (Make:JAQUAR/HINDWARE/CERA/PARRYWARE)
-
-
-
Half pedestal basin FNS-WHT-40801 Wall Hung Basin with Fixing Accessories Size: 620x480x185 mm & FNS-WHT-40305Half pedestal with Fixing Accessoriesfor 40801
9
-
6998
Supplying all materials, labour & T&P for fitting and fixing of following sizes of white glazed vitreous chinaCROTO urinal basin confirming to specification of approved make as per IS-2556 with ISI mark in all floor along with supply & fixing of necessary component parts like pair of C.I./M.S. bracket including connection from supply pipe with all taxes, duties, transportation etc. all complete as per specification & direction of the Engineer-in-charge.(Make:HINDWARE/PARRYWARE/CERA)
-
-
-
Urinal CROTO (Back inlet) (30X33X45cm) starwhite
3
-
2824
Providing all materials, labour, T&P for fitting and fixing of white glazed vitreous china water closet (European pattern) 'P' or 'S' type with cistern & seat cover, wash hand basin of size 650mmx350mm with one pair basin bolt, one no. hinged rail 760mm long & 5 nos. grab rails 600mm long including supply of sutaible PVC wall plug and Brass screws etc. suitable for handicapped toilets in all floor etc. all complete including cost, taxes and conveyance as per specification all complete as per direction of Engineer-in-charge. Make:HINDWARE/CERA. (As per Model-Matrix Set of Hindware)
-
-
-
Matrix set of Hindware
2
-
42475
Supplying, fitting and fixing of following types CP fittings of approved make and quality confirming to relevant IS specifications with leak proof threaded joints including the cost of all materials, cost of labour, conveyance, taxes, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge. (Make:JAQUAR)
-
-
-
Shortbody Bib cock with Wall Flange (As per Cat. No.:KUP-CHR-35079PMof Jaquar)
2
-
1260
Hand Shower (Health Faucet) with 8mm Dia,1.2 Meter Long Flexible Tube & Wall Hook ALD CHR -573 of JAQUAR
12
-
1671
15mm dia Angular Stop Cock with wall flange
(As per Jaquar, Cat. No.: KUP-CHR-35053PM)
37
-
1373
Liquid Soap dispenser with glass bottle
(As per Jaquar, Cat. No.: AKP-CHR-35735P)
21
-
1684
C.P. Toilet Roll holder with stainless steel flap.. (As per Cat no.ACN-CHR-1153S of Jaquar)
12
-
1054
Towel Ring Round
(As Per Jaquar,Cat no.:ACN-CHR-1121BN)
11
-
828
150mmX150mm square trap with 5mm Border
(As per Prayag, Cat. No.: FT-31 M)
28
-
581
32mm Half Thread Waste Coupling
(As per Jaquar, Cat. No.: ALD-CHR-709)
11
-
509
32mm Full Thread Waste Coupling
(As per Jaquar, Cat. No.: ALD-CHR-705)
3
-
509
15mmx450 mm Braided Hose Connection Pipe with both side Nuts & Rubber Washers . (As per Cat. No-805B of Jaquar)
23
-
377
Extension Piece (15 x 25 mm)
(As per CERA, Cat. No.: F8070301)
43
-
134
32mm dia C.P. Coat Hook (Double) (As per Cat. No. ACN-CHR-1161N of Jaquar)
12
-
477
32mm dia CP on Brass Bottle Trap (As per Cat. No. ALD-769L250x190 of Jaquar)
14
-
1358
Hand Dryer SMART FLOW.(As per Cat no HDR-WHT-M04A of Jaquar)
6
-
9094.8
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer in charge
-
-
-
Design Mirror(Parryware)
9
-
1550.9
Single Lever Exposed Parts Kit of Hi-flowDiverter Consisting of Operating Lever,Cartridge Sleeve, Wall Flange (withSeals), Button Assembly Sleeve &Button (Compatible with ALD-079N)(As Per Cat. No: Cat. No: KUP-CHR-35079NKPM ofJaquar)
4
-
3462
Pillar CockCat. No: LYR-CHR-38011 of Jaquar
9
-
1935.8
Urinal Valve Auto Closing System with Built-in Control Cock & Wall Flange Cat no PRS CHR-077 of Jaquar
3
-
2096
Bathtub Spout with Wall FlangeCat. No:CHR--SPJ-15429PM of Jaquar
4
-
1591.18
Concealed Body for Single Lever HighFlow Diverter with Button Assembly,But without Exposed Parts cat no. AL;D -CHR-079n OF Jaquar
4
-
3363
Overhead Shower ø105mm Round Shape Multi Flow with Air Effect (ABS Body & Face Plate Chrome Plated)with Rubit Cleaning System CAT NO. OHS CHR-1719 OF jaquar
4
-
4146
Shower Arm 600X25X25mm Square FlangeCat no.-SHA CHR455L600 of jaquar
4
-
2595.7
Towel Rack 600mm long with Lower Hangers, Stainless Steel AKP CHR-35781PS of jaquar
4
-
3715
Providing all materials, labour, T&P for fitting and fixing of following size of 12mm thick toughened glass for urinal partition of approved make in all floor with edge moulding & polishing with chromium plated brass screws, G/W brackets 90° (Double Sided Back Plate) of DORMA make with all taxes, duties, transportation etc. all complete as per specification & direction of Engineer-in-charge.
-
-
-
Toughened glass partition of Size-900mm ht. x 450mm width for Urinal Partition.
2
-
10211
Providing all labour, T&P and machinaries for installation,commissioning of Three phase sensor with level indicator (Drinking & Flushing OHT) and cables etc as per direction of EIC.
1
-
9908
Supply, installation,testing & commisioning of water cooler cum purifier with chiller in floor of following capacity:60/80 SS including fixing the same on the floor with necessary water connection & waste waste arrengments with all labour, T&P etc.all complete as per the specification & direction of EIC. (As per Model :AG Green pure Chill 80SS of Aquaguard/IONEXCCHANGE)
-
-
-
Zero B Storage Cooler cum UV Water Purifier 60/80/120 AquaguardGreen Storage Cooler-cum-Purifier
Model- AG Green Pure Chill 120PSS UV,
2
-
95747
Sinking of 200mmx150 mm dia Tube Well up to 100mtr. Depth.
-
-
-
1.Nos. of Borewell
-
-
-
Labour for drilling a perfectly vertical bore hole for a specified dia for a specified depth below G.L through consolidated and un-consolidated rocks with down the hole hammer drilling rig or combination drilling rig (1200 cfm/ 300 psi) as required to suit the site condition as per the direction of EIC including use of own rigs with its accessories, T&P & consumables etc. for lowering of 200mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/ PVC casing pipes, if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the Tube Well).
-
-
-
Labour for drilling of 200mm dia & 150mm dia bore from '0' mtr. to '100' mtr.
100
-
776.2
Providing & lowering the following size PVC pipes (ASTM) with or without slotted pipes as per the necessity from 1.00m above ground level up to required depth and fitting and fixing up in perfectly vertical position, including cutting, threading pipe and slotted pipe and supplying and fixing all jointing materials, T&P etc. complete and keeping the top of the casing pipe threaded including plugging the tube well to prevent entry of foreign materials from above. The cost inclusive of pipes, fittings, labour, consumables, POL, consumables with hire & running charges of machinaries etc. as per specification & direction of EIC.
-
-
-
Lowering of 200mm (8'') dia PVC plastic pipes Sch-80 as per ASTM-D-1785/2004 upto required depth.
51
-
2145
Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment , labour, all consumables, running & hire charges of machinaries etc. all complete as per the direction of the EIC.
1
-
6540
Supplying all materials, labour & tools and plant and grouting with cement slurry for sanitary sealing around the GI/PVC casing pipe up to 3mtrs below ground level to plug the bore hole including cost of cement all complete as per specification & direction of the Engineer-in-Charge.
10
-
425.9
Providing all materials required for construction of brick masonry chamber for encasing the production well with Fly Ash bricks of size 25cm x 12cm x 8cm having crushing strength not less than 75Kg/Sqcm in C.M (1:4), PCC 1:3:6 with 40mm size hard granite crusher broken metal of 150mm thick on base & 100mm thick on top of the chamber, encasing the annular area of casing pipe with cement concrete 1:2:4 of minimum size 450mmx450mmx1200mm height including form work, filling the inside cavity with sand, C.C. 1:2:4 on top of the chamber of 50mm thick, 12mm thick cement plaster 1:4 on outer wall & top surface, earth work excavation in all kinds of soil/rock including back filling with selected excavated earth duly watered & rammed with smooth finishing. The height of chamber should be 450mm from G.L. The cost inclusive of all materials, labour, T&P etc. complete as per specification & direction of Engineer-in-charge.
-
-
-
Outer size 1400mm x 1400mm x 1200mm ht. chambers
1
-
12936
Installation of Submerssible pump set in the Bore-Well
-
-
-
Supply, Installation, testing & commissioning of 3-phase, 50Hz Submersible pump set of required head 75mtr & discharge 5 Lps including HDPE delivery pipes of 10 Kgf/cm2 of material grade P.E.-80,S.S Tapper(Two nos each) of 0-.45 mtr Long,MS Supporting Clamp with MS Nuts and Bolts alongwith 200 mm dia Tube-well cover and cap suitable for above Pump-set and Suitable size of Four core flat cable of 120 mtr with Bore bunched copper conductor insulated sheathed with PVC for Submersible Motor with voltage grade up to 415 Volt ,along-with 2 nos. of earthing 7.5 KW and 10 Hp confirming to IS-694/1990 of required length, control panel Star Delta with APFC and ATS arrangement & required accessories suitable for 200x150mm size Production Well ,control panel with Sensor arrangement to run the motor automatically according to Level of Raw Water Sump i.e 50% of Volume& required accessories suitable for 200x150mm size Production Well etc all complete as per specification & direction of EIC. Make:-Texmo/Crompton Greaves/Willo/Lubi/Kirloskar or Equivalent
-
-
-
1ests
1
-
54689.4
Supplying and Fixing of Sintex Triple Layer White (ISI Marked) over head water storage tank with following capacities conforming to IS : 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto required elevation and placing the tank to the required position etc all complete as per direction of Engineer-in-Charge.(Make -Sintex)
-
-
-
5000 Litres Capacity Triple Layer white Tank for Drinking& Flushing & Fire Fighting
2
-
55200.7
Providing all material, labour, T&P and construction of Gully Trap chamber of size as mentioned below with 250mm nominal size flyash Brick having crushing strength not less than 75kg/sqcm in CM 1:4 over a bed of 100mm thick C.C. (1:3:6) using 40mm size HG metal, plastering with 12mm thick cement plaster with cement punning in cement mortar 1:4 on inner surface and 12mm thick cement plaster in cement mortar (1:4) on external surface,fitting & fixing of 110mm square PVC Gully Trap with grating and pre-cast factory made (SFRC) cover with frame of opening size 260mmx260mm, moulding and shaping the channel & benching with C.C (1:2:4) with hard granite chips 12mm size,earth work excavation in all kinds of soil & rock and filling the cavity of the chamber with excavated & selected earth levelling the surface around the chamber with disposal of surplus earth within 50mt lead as per specification, design & drawing including cost of curing and all taxes, royality, cost, conveyance etc. all complete as per specification & direction of EIC.
-
-
-
300mm x 300mm x upto 450mm deep gully trap.
4
-
2419
Providing all materials, labour T&P for construction of inspection chamber with Fly Ash bricks of size 25cm x 12cm x 8cm having crushing strength not less than 75Kg/Sqcm in C.M (1:4), PCC 1:3:6 with 40mm size hard granite crusher broken metal of 150mm thick, 12mm thick cement plaster 1:3 both in outer & inner surface of the wall & bottom, earth work excavation in all kinds of soil/rock including back filling with selected excavated earth duly watered & rammed. RCC M-20 with 20mm & down size H.G crusher broken chips having minimum cube strength 200Kg/Sqcm at 28 days confirming to IS-453/76 & IS-3370 for roof slab of 125mm average thick with form work as per the requied size including cost for MS reinforcement as per approved design & drawing & fixing of CI manhole cover with frame (100 kg) for opening of 600x600mm including cost of all materials, labour, T&P etc. complete as per specification & direction of Engineer-in-charge.
-
-
-
Inner size 750mm x 750mm x 500mm depth.
14
-
18995
Providing all materials, labour, T&P required for construction of RCC M-25 man hole chamber of following sizes having cube strength 250 Kg/cm2 at 28 days confirming to IS-456/2000 & IS-3370 at all locations & height using h.g. stone aggregate (Crusher broken) of 20mm & down size including machine mixing, lifting, hoisting, conveying, placing in position, mechanical consolidation, curing, de-watering (if required). The minimum thickness of RCC base slab, all side walls & roof slab shall be not less than 150mm, 150mm & 125mm (avg.) respectively. The cost shall be inclusive of rigid, levelled & plumbed centering & shuttering to required slope, allignment & size for all kinds of RCC work with steel/ ply centering materials with all bracing, ties, anchorage & supports and removing the same after required paid & placing M.S.Reinforcement HYSD bar of required dia including cutting, bending, straightening of approved quality as per approved design & drawing & tying the grills for RCC works & placing in position using binding wires (18 to 20 gauge soft drawn & cold annealed).
-
-
-
PCC 1:3:6 with 40mm size h.g.c.b. metal of 100mm thick, moulding & shaping the channel & benching with C.C. 1:2:4 with 12mm size h.g.c.b. chips, 12mm thick cement plaster 1:3 with cement punning on inner wall surface, earth work excavation in all types of soil/rock including cement concrete cutting as per site condition, filling the foundation base with sand duly watered & rammed, providing, fitting & fixing of pre-cast factory made man hole cover with frame ( heavy duty) for clear opening 560mm dia, providing, fitting & fixing of poly propylene steel reinforced man hole steps of approved quality & size in two parallel line of 300mm spacing in vertical wall with centre to centre 375mm (staggered) etc.all complete as per specification & direction of EIC.
-
-
-
Manhole chamber of Inner size 800mmx900mmx 600mm depth.
9
-
38827
Extra for every additional depth of 0.10mtr. or part there of manhole size 800mmx900mm from 600mm depth upto 1500mm depth.
2
-
13431
Supplying all materials, labour, T&P, fitting and fixing uPVC SWR pipes (Type-B) of approved make confirming to IS-13592/1992, both below & above ground level or fixing on wall surface in all floors including all taxes, duties, transportation & scaffolding etc. all complete as per specification & direction of the Engineer-in-charge. Make: ASTRAL/ASHRIVAD/AJAYA/AKG/SUPREME.
-
-
-
110mm dia soil pipe
24
-
848
110mm dia waste pipe
83
-
848
Supplying all materials, labour, T&P, fitting and fixing of following dia uPVC SWR (Ringfit) fittings of approved make confirming to IS-14735 in all floor with all taxes, duties, transportation & requisite testing as per specification & direction of EIC.Make:ASTRAL/ASHRIVAD/AJAYA/AKG/SUPREME.
-
-
-
110mm Pushfit Coupler
84
-
169
110mm x110mm P-Trap
28
-
485
110mmx87.5º bend
8
-
254
110mmx87.5º door bend
8
-
307
110mmx45º bend
67
-
212
110mm dia Single Tee
43
-
362
110mm dia Single 'Y'
42
-
430
110mm dia Single 'Y' with Door
8
-
527
110mm dia Double 'Y'
13
-
597
110mm WC connector straight with lip ring
12
-
330
PVC Clamp Suitable for 110mm dia pipe
12
-
86
110mm dia Vent cowl
8
-
64
110mm Socket plug
25
-
97
Gravity Sewage Disposal System
-
-
-
Earth work :
-
-
-
Earth work in all kinds of soil within 50m initial lead & 1.5m initial lift including dressing, levelling & breaking clods to maximum 5cm to 7cm & laying in layers not exceeding 0.3m in depth & as per specification & direction of Department.
75.6
-
201.63
Filling foundation trenches and Plinth with excavated & selected earth, laying in layers not exceeding 23cm thick well watered & rammed etc. complete including labour , T&P, lead & lift cost & conveyance, loading, unloading etc. complete as per specification & direction of EIC.
71.2
-
112.02
Providing and laying in trench cement concrete ( 1:3:6 ) with 40mm size hard granite metal in the following type of beddingand hunching for RCC NP3Spigot socket concrete pipes of the following internal diameter including curing complete as per specification & direction of E-i-c.
-
-
-
For 150mm dia pipe
140
-
585.8
Providing all materials, labour, T&P and laying of Centrifugally cast (spun) RCC non pressure pipes of class NP3 with socket & spigot ends confirming to IS-458 with ISI mark in standard lengths suitable for push on joints including lowering the pipes in to trenches to required depth below G.L, with proper allignment & gradient, testing, commissioning, de-watering (if required) including rubber gasket as per IS-5382/1985 with ISI mark with all taxes & duties etc. all complete as per specification & direction of EIC. (Excluding cost for earth wok, back filling which will be paid separately).
-
-
-
150mm (NB) dia NP 3 RCC S/S pipe
140
-
1088
Supplying all materials, labour, T&P, fitting and fixing uPVC SWR pipes (Type-A) For rain water Stacking pipe in the Duct(Co-moulded Ring type) of approved make confirming to IS-13592/1992with ISI marked, both below & above ground level or fixing on wall surface in all floors including all taxes, duties, transportation & scaffolding etc. all complete as per specification & direction of the Engineer-in-charge. Make: ASTRAL/ASHIRVAD/AJAY.
-
-
-
160mm dia Bend (87.5 degree)
6
-
541
160mm dia pushfit coupler
12
-
454
160mm dia pipe
76
-
1192
160mm dia Bend (87.5 degree) Door bend
6
-
581
Vertical Grating 150x150mm for Rain water gutter on terrace ,opening to 160mm dia Rain water pipes
6
-
305
Supplying of all materials labour & T&P for drilling of 100 mm Hole over 250 mm dia CM pipe through Core Cutting Machine and PVC Welding after inserting of 100mm dia UPVC SCH-85 with 200 mm dia pipe for froming T joints etc. Complete as per direction of EIC.
-
-
-
PVC Core drilling on 250mm Dia Pipe .
2
-
1000
Pvc Welding with 100mm dia UPVC pipe and 250mm dia UPVC CM Pipe for a forming a T-Joint
2
-
2500
Resprotary systemFor roof top rain water borewell inside 2mtr dia recharge pit
-
-
-
Supplying of all materials labour & T&P for drilling of 100 mm Hole over 250 mm dia CM pipe through Core Cutting Machine and PVC Welding after inserting of 100mm dia UPVC SCH-85 with 200 mm dia pipe for froming T joints etc. Complete as per direction of EIC.
-
-
-
PVC Core drilling on 250mm Dia Pipe .
2
-
1000
Pvc Welding with 100mm dia UPVC pipe and 250mm dia UPVC CM Pipe for a forming a T-Joint
2
-
2500
Roof top rain water Inspection chamber to Recharge pit laying of 300mmdia NP3 Spigot Socket RCC pipe .
-
-
-
Earth work in all kinds of soil within 50m initial lead & 1.5m initial lift including dressing, levelling & breaking clods to maximum 5cm to 7cm & laying in layers not exceeding 0.3m in depth & as per specification & direction of Department.
46.2
-
201.63
Filling foundation trenches and Plinth with excavated & selected earth, laying in layers not exceeding 23cm thick well watered & rammed etc. complete including labour , T&P, lead & lift cost & conveyance, loading, unloading etc. complete as per specification & direction of EIC.
39.08
-
112.02
Providing all materials,labour,T&Playing trench Cement Concrete (1:2:4) Pedestal with 40mm size h.g.c.b. metalin the following type of bedding and hunching of RCC NP3 Pipes of following internal diametersincluding concrete for bedding and curing as per PHspection and drawing for RCC pipe. The cost inclusive of all taxes, royality, hire & running charges of all machineries, Transportation charges with all consumables etc. all complete as per specification & direction of EIC.
-
-
-
300mm (NB) dia NP3 RCC S/S pipe
70
-
1002.8
Providing all materials, labour, T&P and laying of Centrifugally cast (spun) RCC non pressure pipes of class NP3 with socket & spigot ends confirming to IS-458 with ISI mark in standard lengths suitable for push on joints including lowering the pipes in to trenches to required depth below G.L, with proper allignment & gradient, testing, commissioning, de-watering (if required) including rubber gasket as per IS-5382/1985 with ISI mark with all taxes & duties etc. all complete as per specification & direction of EIC. (Excluding cost for earth wok, back filling which will be paid separately).
-
-
-
300mm (NB) dia NP3 RCC S/S pipe
70
-
3419
Construction of 50 users RCC Septic Tank of inner size 5.00x1.6x1.40m with 2 year cleaning interval Septic tank no-1no
-
-
-
Earth work in all kinds of soil within 50m initial lead & 1.5m initial lift including dressing, levelling & breaking clods to maximum 5cm to 7cm & laying in layers not exceeding 0.3m in depth & as per specification & direction of Department.
-
-
-
Upto 1.50m initial lift
30
-
201.63
From 1.50m to 3.00m lift
46
-
274.25
Filling foundation trenches and Plinth with excavated & selected earth, laying in layers not exceeding 23cm thick well watered & rammed etc. complete including labour , T&P, lead & lift cost & conveyance, loading, unloading etc. complete as per specification & direction of EIC.
24.9
-
112.02
Filling the pipe line trenches with sand including watering & ramming etc. complete including all labour, T&P, cost of sand, conveyance, taxes, royality, loading & unloading as per specification & direction of EIC.
2
-
547.2
Providing and laying plain cement concrete (1:3:6) in foundation and bottom layers using 40mm size hard black crusher broken granite metal of approved quality and size from approved quarry including cost, conveyance, royality, all taxes complete and providing all labour T&P for machine mixing, lowering, laying and compacting to proper thickness, watering and curing for the required period and including dewatering (if required) as per the specification & direction of Engineer-in-charge.
3.4
-
4427.4
Providing and laying cement concrete M15 in foundation and bottom layers using 12mm size hard black crusher broken granite chips of approved quality and size from approved quarry including cost, conveyance, royality, all taxes complete and providing all labour T&P for machine mixing, lowering, laying and compacting to proper thickness, watering and curing for the required period and including dewatering (if required) as per the specification & direction of Engineer-in-charge.
0.6
-
4199.2
Providing all materials, labour, T&P for laying R.C.C. M-15 having minimum cube strength of 150 Kg/cm2 at 28 days confirming to IS 456/79 & IS 3370 for water tank at all location & height using graded H.G stone aggregate of 20mm & down size including machine mixing, lifting, conveying, placing in position mechanical consolidation curing, dewatering (if necessary) & testing the concrete for water tightness, rectification of defects if any etc., complete all as per specification & drawing including cost of all material, labour, machinery hire charges, T&P and all testing charges (but excluding cost of reinforcement bars, binding wirings, centering & shuttering etc.) as per the specification & direction of Engineer-in-charge.
12.2
-
4199.2
Providing & making strong, rigid, levelled & plumbed centering & shuttering to required shape, allignment & size for all kinds of RCC works with wooden or steel centering materials with all bracing, ties, anchorage & supports including provision for necessary holes for P.H. works including cost of nails etc. complete & dismantling & removing the same after required interval from the date of casting including cost of all materials with transportation, hire charges, taxes, loading, unloading all labour, T&P, sundries etc. complete as per the specification & direction of the Engineer-in-charge.
101.2
-
414.7
Cutting, bending, binding, straightening HYSD bars of required diameter of approved quality as per approved design & drawing & tying the grill for RCC works & placing in position using binding wire (18 to 20 gauge, soft drawn & cold annealed) including cost of all labour, material, sundries, T&P, scaffolding etc. all complete as per the specification & the direction of Engineer-in-charge.
11.6
-
7926.9
Providing plaster with cement mortar including cement punning/ bitumen painting where required finished smooth over brick work with waterproofing cement based compound of approved quality including finishing smooth to proper slope and plane including cost of all materials with conveyance, royalty, taxes, watering, scaffolding and curing, all labour and T&P etc. complete as per specification & direction of EIC.
-
-
-
12mm thick C.P. 1:3 with punning
47.9
-
185.9
Providing, fitting & fixing of following sizes of precast factory made RCC man hole cover with frame including locking arrangement. The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC.
-
-
-
560 mm dia clear opening CI man hole cover with frame.(As per Jawaswal Neco Industries 560 mm dia Cover with Frame 128 Kg(SF)or equivalant
4
-
11723
Providing, fitting & fixing of Poly Propylene man hole steps of approved quality & size in two parallel line of 300mm spacing in vertical walls with centre to centre 375mm (staggered).The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC.
48
-
238
Providing, fitting & fixing of 110 diax1.80m long UPVC SWR pipe (Type-B) of approved make confirming to IS-13592/1992 with Vent Cowl including construction of cement concrete pedestal (1:2:4) of size 0.30mx0.30mx0.45m ht. The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC.
2
-
942
Providing, fitting & fixing of 110mm dia S.W.R Tee. The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC.
2
-
362
Providing all labour, T&P for benching & making Channel for inlet & outlet chamber.
1
-
200
Construction of Soak Pit of Inner Dia 1.50m & depth 3.00m
-
-
-
Earth work in all kinds of soil within 50m initial lead & 1.5m initial lift including dressing, levelling & breaking clods to maximum 5cm to 7cm & laying in layers not exceeding 0.3m in depth & as per specification & direction of Department.
-
-
-
Upto 1.50m initial lift
9.9
-
201.63
From 1.50m to 3.00m lift
8.9
-
274.25
Filling foundation trenches and Plinth with excavated & selected earth, laying in layers not exceeding 23cm thick well watered & rammed etc. complete including labour , T&P, lead & lift cost & conveyance, loading, unloading etc. complete as per specification & direction of EIC.
3.5
-
112.02
Providing all material, labour & T&P for filling the both inner & outer surface of soak pit with 40mm size hard granite hand broken metal etc. complete including lead & lift cost & conveyance, loading, unloading etc. complete as per specification & direction of EIC.
8.9
-
1823
Filling the foundation trenches with sand including watering & ramming etc. complete including all labour, T&P, cost of sand, conveyance, taxes, royality, loading & unloading as per specification & direction of EIC.
0.1
-
547.2
Providing and laying plain cement concrete (1:3:6) in foundation and bottom layers using 40mm size hard black crusher broken granite metal of approved quality and size from approved quarry including cost, conveyance, royality, all taxes complete and providing all labour T&P for machine mixing, lowering, laying and compacting to proper thickness, watering and curing for the required period and including dewatering (if required) as per the specification & direction of Engineer-in-charge.
0.25
-
4427.4
Providing all material, labour, T&P for Fly ash Brick masonry work using Fly ash of 25cm X 12 cm X 8 cm size having crushing strength not less than 75Kg/Sqcm. in cement mortar (1:4) including cost, conveyance, taxes, royalties, loading and unloading of all materials and labour and scaffolding, watering, curing T&P etc., complete as per the specification & direction of the Engineer-in-charge.
-
-
-
Foundation & Plinth
1.8
-
4230.9
Providing all material, labour, T&P for using Dry Fly ash Brick of 25cm X 12 cm X 8 cm size having crushing strength not less than 75Kg/Sqcm. including cost, conveyance, taxes, royalties, loading and unloading of all materials and labour and scaffolding, watering, curing T&P etc., complete as per the specification & direction of the Engineer-in-charge.
-
-
-
Foundation & Plinth
2.2
-
3465.4
Providing all materials, labour, T&P for laying R.C.C. M-20 having minimum cube strength of 200 Kg/cm2 at 28 days confirming to IS 456/79 & IS 3370 for water tank at all location & height using graded H.G stone aggregate of 20mm & down size including machine mixing, lifting, conveying, placing in position mechanical consolidation curing, dewatering (if necessary) & testing the concrete for water tightness, rectification of defects if any etc., complete all as per specification & drawing including cost of all material, labour, machinery hire charges, T&P and all testing charges (but excluding cost of reinforcement bars, binding wirings, centering & shuttering etc.) as per the specification & direction of Engineer-in-charge.
0.3
-
4543.6
Providing & making strong, rigid, levelled & plumbed centering & shuttering to required shape, allignment & size for all kinds of RCC works with wooden or steel centering materials with all bracing, ties, anchorage & supports including provision for necessary holes for P.H. works including cost of nails etc. complete & dismantling & removing the same after required interval from the date of casting including cost of all materials with transportation, hire charges, taxes, loading, unloading all labour, T&P, sundries etc. complete as per the specification & direction of the Engineer-in-charge.
2.3
-
414.7
Cutting, bending, binding, straightening HYSD bars of required diameter of approved quality as per approved design & drawing & tying the grill for RCC works & placing in position using binding wire (18 to 20 gauge, soft drawn & cold annealed) including cost of all labour, material, sundries, T&P, scaffolding etc. all complete as per the specification & the direction of Engineer-in-charge.
0.3
-
7926.9
Providing plaster with cement mortar including cement punning/ bitumen painting where required finished smooth over brick work with waterproofing cement based compound of approved quality including finishing smooth to proper slope and plane including cost of all materials with conveyance, royalty, taxes, watering, scaffolding and curing, all labour and T&P etc. complete as per specification & direction of EIC.
-
-
-
12mm thick C.P. 1:4
8.2
-
143.2
12mm thick C.P. 1:4 with punning
6.1
-
154.5
12mm thick C.P. 1:4 with punning and bitumen painting over wall top.
1.4
-
203.9
Providing, fitting & fixing of following sizes of CI man hole cover with frame including locking arrangement. The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC.
-
-
-
560 mm dia clear opening CI man hole cover with frame.(As per Jawaswal Neco Industries 560 mm dia Cover with Frame 128 Kg(SF)/equivalent
1
-
11723
E.I Works :- Wiring for light point/ fan/ exhaust fan point/ call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable (Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed make) in surface / recessed 2 mm thick PVC conduit with modular switch (Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Europa) or equievalant reputed make & model A catagory ISI marked as per direction of Engineer-in-charge and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable including providing modular box with cover of requisite number of modules including providing cover plates as required. All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
-
-
-
Single light point controlled by one 6A switch or first light point of group control.
66
-
678
Subsequent point of group control
21
-
399
Supplying and fixing two module steeped type electronic fan regulator with proper modular plate switch box including connections etc. as required(Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Europa) or equievalant reputed make.as per direction of Engineer-in-charge All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
19
-
491
Supplying and fixing 6 Amp plug with 6 Amp switch (Modular Type) on existing board.(Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Europa) or equievalant reputed make as per direction of Engineer-in-chargeAll the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
7
-
426
Supplying and fixing including testing and commissioning of 6A modular socket outlet with 6 Amp switch including providing GI modular box with faceplate etc as required.(Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Europa) or equievalant reputed make as per direction of Engineer-in-chargeAll the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
-
-
-
1 nos 6 Amp 3-pin socket with 6 Amp switch.
14
-
541
2 nos 6 Amp 3-pin socket with 2 nos 6 Amp switch.
10
-
706
Supply, installation, testing & commissioning of 6 / 16 Amp Plug Boards consisting of a 16 Amp clip-in type modular switch with indicator and a 6/16 Amp clip-in type modular socket fixed on metallic concealed box including interconnections and making good the damages caused complete as required and as per direction of Engineer-in-charge.(Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Europa) or equievalant reputed make as per direction of Engineer-in-chargeAll the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
35
-
561
Supplying, installation, testing & commissioning of 25 amp modular socket outlet on surface or in recess, on 1 Nos two module GI box with plate etc. complete as direction of Engineer-in-charge. (Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Europa) or equievalant reputed make as per direction of Engineer-in-chargeAll the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
12
-
1330
Wiring for circuit/ submain wiring along with earth wire of following size of FRLS heavy gauge PVC insulated copper conductor single core cable in heavy duty PVC conduit laid in surface/ recess as required. (Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed makes as per direction of Engineer-in-charge )
-
-
-
2X1.5 + 1X1.5 sqmm FRLS Cu wire (for circuit wiring)
1500
-
181
2X2.5 + 1X2.5 sqmm FRLS Cu wire (for Light plug circuit wiring)
1000
-
206
2X4 + 1X4 sqmm FRLS Cu wire (for power plug )
1500
-
237
4X6 + 2X6 sqmm FRLS Cu wire (submain)
350
-
518
Supply, delivery and fixing of Ceiling fan hook box made out of 18 swg GI sheet and containing 10 mm dia round ms bar projecting atleast 150mm on either side & duly bent to accommodate ceiling fan down rod bolt & having earthing arrangement as per direction of Engineer-in-charge.
19
-
120
400W LED Sports Light fitting (44000 Lumen) with 80CRI (4KV inbuild & 10KV external surge protection, IP66, Aluminium die cast body,cool white-(5700K to 6500K),Impact resistance of IK08, Over current, short circuit, over voltage , dust & water protection, entire luminarie should act as Heat shrink(LED life50000 burning hour),The fixture must have 3-4mm thick safety glass cover with BIS Certified driver of IP67 protection & fixture must have Two nos LED Driver as required of make Moso/Inventronics/Sosen. Light Fixture of (Make Bajaj CAT No:(AMPL F 480L WH) or Equivalent of Philips/ DISANO/Abacus/ Panasonic /Trilux /Havells/Wipro or equievalant reputed make & model A catagory ISI marked as per direction of Engineer-in-charge .) . The luminaire must be Replacement Warranty will be 5 years.)
20
-
40166
Surface LED Light fitting (8000 Lumen) of (Make BAJAJ (CAT No:BPSF80W WH LED SL ) or Equivalent of Philips/ DISANO/Abacus/ Panasonic /Trilux /Havells/Wipro or equievalant reputed make & model A catagory ISI marked s per direction of Engineer-in-charge .) . The luminaire must be Replacement Warranty will be 5 years.)
4
-
11942
Surface LED Light fitting (3600 Lumen) of (Make BAJAJ (CAT No:BPSF36W WH LED)or Equivalent of Philips/ DISANO/Abacus/ Panasonic /Trilux /Havells/Wipro or equievalant reputed make & model A catagory ISI marked as approved.) . The luminaire must be Replacement Warranty will be 5 years.)
2
-
8486
Surface LED Light fitting (2000Lumen) of (Make BAJAJ (CAT No:BPSC 20W LED 4F D WH ) or Equivalent of Philips/ DISANO/Abacus/ Panasonic /Trilux /Havells/Wipro or equievalant reputed make & model A catagory ISI marked as approved.) . The luminaire must be Replacement Warranty will be 5 years.)
43
-
7005
Surface/Recess LED Light fitting (1500 Lumen) of (make BAJAJ (CAT No:BPSLR 15W WH PRO RD) or Equivalent of Philips/ DISANO/Abacus/ Panasonic /Trilux /Havells/Wipro or equievalant reputed make & model A catagory ISI marked s per direction of Engineer-in-charge .) . The luminaire must be Replacement Warranty will be 5 years.)
2
-
1674
LUMINARIE: 40 W LED Luminarie with LED asymmetric post top lantern with optical grade toughend glass diffuser with inbuilt surge protection of 4KV (4000 K-CCT) with IP65 driver of 4KV SPD of make BAJAJ .(CAT No:BCFIMG/40W LED NW PT ASYM) or Equivalent of Philips/ DISANO/Abacus/ Panasonic /Trilux /Havells/Wipro or equievalant reputed make & model A catagory ISI marked s per direction of Engineer-in-charge .) . The luminaire must be Replacement Warranty will be 5 years.) as required. POSTTOP LANTERN: 3 mtr height special steel grade pipe with optical grade toughend glass with inbuilt 4KV SPD , CCT -3000K of make BAJAJ (CAT: BCF ANTL 30W LED WW 3M) and equivalent of DISANO/PPE
10
-
53055
Surface/Recess LED Light fitting (900 Lumen) of (make BAJAJ (CAT No:BPSLR 9W WH PRO RD) or Equivalent of Philips/ DISANO/Abacus/ Panasonic /Trilux /Havells/Wipro or equievalant reputed make & model A catagory ISI marked s per direction of Engineer-in-charge .) . The luminaire must be Replacement Warranty will be 5 years.)
16
-
1378
LED Bulk head Light fitting (1000 Lumen) of (make BAJAJ .(CAT No:BIBWP 10W LED)/ or Equivalent of Philips/ DISANO/Abacus/ Panasonic /Trilux /Havells/Wipro or equievalant reputed make & model A catagory ISI marked as approved.) . The luminaire must be Replacement Warranty will be 5 years.)
2
-
1723
Supply & Installation of surface LED Luminarie of Mirror Light (6W) of make JAQUAR/ or Equivalent of Philips/ DISANO/Abacus/ Panasonic /Trilux /Havells/Wipro or equievalant reputed make & model A catagory ISI marked s per direction of Engineer-in-charge .) . The luminaire must be Replacement Warranty will be 5 years.)
4
-
791
Supply & Installation of surface LED Luminarie of Entry/Exit Light with back up for 2 hrs. of make BAJAJ (CAT: BESL 03 LED SSD WBB) or Equivalent of Philips/ DISANO/Abacus/ Panasonic /Trilux /Havells/Wipro or equievalant reputed make & model A catagory ISI marked s per direction of Engineer-in-charge .) . The luminaire must be Replacement Warranty will be 5 years.)
8
-
6320
Supply & Installation of GATE LED Light of make BAJAJ (CAT: BGCL 40W LED WH) or Equivalent of Philips/ DISANO/Abacus/ Panasonic /Trilux /Havells/Wipro or equievalant reputed make & model A catagory ISI marked s per direction of Engineer-in-charge .) . The luminaire must be Replacement Warranty will be 5 years.)
2
-
8922
Supplying, installation, testing and commissioning of ceiling fan (5 star rating) including wiring the down rod, earthing etc as required Make-Equievalant higher model with as per BIS norm of Havells/almonard/Anchor/Panasonic/Usha or equievalant reputed make & model A catagory ISI marked as approved ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 5 years.
-
-
-
1200 mm sweep
19
-
2139
Supplying, installation, testing and commissioning of Exhaust fan / fresh air fan with louvre Make-Equievalant higher model with as per BIS norm of Havells/almonard/Anchor/Panasonic/Usha or equievalant reputed make & model A catagory ISI marked as approved ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 5 years.
-
-
-
300 mm sweep fibre body fresh air fan
6
-
1600
DBS Supplying and fixing following way, TP and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCBOs/ISOLATORS)Make-Legrand/Schneider/Siemens/panasonic equievalant reputed make & model A catagory ISI marked as per direction of Engineer-in-charge .All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
-
-
-
4 way, Double door as LDB.
2
-
4384
6 way, Double door as PDB.
3
-
5354
Supplying and fixing following rating RCBOs/ MCBs in the existing DB complete with connections,testing and commissioning etc. as requiredEquievalant higher model of Make-Legrand/Schneider/Siemens/panasonic equievalant reputed make & model A catagory ISI marked as per direction of Engineer-in-charge .All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
-
-
-
63 Amps4P, 100 MA RCCB
5
-
5998
6 Amp to 32 Amp, 10 KA SP MCB (C-Curve)
78
-
328
Supplying and fixing of following sizes of heavy gauge PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required..MAKE KINJAL/ AKG/Anchor or equievalant reputed make A catagory ISI marked as per direction of Engineer-in-charge
-
-
-
20 mm
500
-
57
25 mm
750
-
69
Supplying and fixing of following sizes of heavy gauge steel conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
25 mm
200
-
147
Wiring for point/circuit wiring along with earth wire of following size of PVC insulated PVC sheathed FRLS multicore flexible copper cable laid on existing cable tray/through conduit as required. (Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed makes as per direction of Engineer-in-charge )
-
-
-
3C X2.5 sq.mm . (for Light Point wiring)
500
-
97
Lightining Protection System :- Supply , Installation, Testing & commissioning of Air Terminal ESE -50. Air Terminal comprised of separate electrically isolated dual copper panels surrounding an Earthed central finial should be coated with chrome for environmental protection.The upper section of the central finial shall be rated to withstand 40KA impulse current and it should be made up of solid brass rod and its length should be more than 85mm above the surrounding panels.(Make:Stromking/ Satalite-3/Indilac or equivalent reputed make as per direction of Engineer-in-charge )
-
-
-
The mounting pole used to support the lightning air terminal shall either be a supporting mast or Free standing mast at a ideal height of 03 metres above to be area protected or as per required level of protection. If any height restrictions are there then min height should be 2mtr but radius of protection will change according to height.
-
-
-
Supply& install of 30 meter 70sq.mm cross section down conductor of single core flexible Copper cable made of min.990Nos copper strands of 3mm dia and having PVC insulation of min. 3mm thickness and overall dia of 16mm. It should be fixed using SS/GI saddles & fixtures every 0.5mtr
-
-
-
Maintenance free Safe Earthing Electrodes with ISI G.I. pipe dia60mm as Secondary electrode with wall thickness of 2.6 mm and the Primary Earthing Electrode will be 32mm X 6mm X 1no M.S. hot dipped galvanized strip filled with a highly conductive & non-corrosive compound in between the Primary Earthing and the secondary Earthing, the Surface Area in mm will be 5,65,200 for 3mtrs length and Cross Sectional Primary conducting area is 192 sq.mm.
-
-
-
Ground Filling Compound filled surrounding to earthing electrode. It should absorb the moisture from surrounding area and it should be non corrosive in nature. It should maintain the constant ohmic value for long life. It should be supplied in packing of 25kgs bag.
-
-
-
Lightning Strike Recorder (L.S.R.): Supply of Australian make L.S.R. It should be non electronic& non- resettable type having 7 digits display &enclosed in an IP-67 enclosure with minimum sensitivity of 1000A & maximum capacity of 220KA tested on 8/20 micro second wave from as per IEC 60-1: 1989. It should be non electronic type and does not require external power supply for working. Supplier should do on site testing of LSR, where impulse generate should be used to show working of LSR. After impulse current passing through LSR it should change the counter reading.
1
-
263034
Split AC Supply, Installation, Testing, Commissioning of highwall split units of following capacities including proper mounting arrangements and accessories, copper refregirant piping,pvc drain piping,power cable,control cable, initial charge of refrigerant, safety limit thermostat, etc complete including 5 KVA voltage stabilizers. ( Make - Voltas, Carrier, LG or Hitachi or equivalent reputed make as per direction of Engineer-in-charge ). 5 years warranty on compressor and 3 years warranty on PCB.
-
-
-
2.0 TR capacity.
10
-
58526
Supply, instalaiton, testing and commission of SOFT COPPER REFRIGERANT PIPING OF 18 swg for high wall uints of various sizes with necessary supports, fitting interconnecting the liquid and the suction lines between the aircooled outdoor unit and the indoor unit. Both suction and liquid line shall be insulated with 19mm thick nitrle rubber tubes as insulation material and shall be covered with treated woven glass fiber reinford covering etc. complete as per the specifications and approved drawings.
-
-
-
1 1/8" Dia
100
-
739
5/8", Dia
100
-
283
Subhead- II (Lan & Telephone) LAN & TELEPHONE Supply & Termination of RJ-45Jack of Category 6 with DualPort British style Face plate 86x86 mm with curvature and wall mount box.Make:- Legrand/Systimex.
5
-
700
Supply & laying of 4 pair Cat6 UTP 4P AIR,23AWG,FRPVCCM, Gray,in existing conduitsMake:- Legrand/Systimex.
50
-
49
Supply & Fixing of Cat6 factroy crimped moulded 24 AWG, LSZH, 2M patch cord.Make:- Legrand/Systimex.
5
-
179
Supply & Fixing of 9U Wall Mount Rack loaded with one no 4Skt 6/16A power distribution unit, 1no cable manager, 1no 90CFM FAN, one pkt H/W screw. Make: Valrack/APW/Retail
1
-
7270
Supply Installation of 24 port 10/100/1000 Mbps L2 Manged Switch with minimum Two combo ports. Make : Digisol/Cisco/HP
1
-
21562
Supply & laying of 2 pair 0.5mm dia FRLS PVC insulated annealed copper conductor, unarmoured telephone cable in the existing cable/trunking as required.
50
-
20
FIRE EXTINGUISHERS - FIRST AID Supplying, installing and commissioning of ISI ABC Powder 4 Kg Fire Extinguisher containing Mono Ammonium Phosphate Powder 50, Stored Pressure Type,Pressure Gauge, fittted with discharge hose, wall mounting bracket etc., Discharge Time less than 15 Secs, Controllable discharge mechanism, Range minimum 4 Meters, applicable on Class A,B,C and electrically started Fire, A Rating- 8A, B Rating 34B, Can Construction : Deep drawn & Co2 Mig welded, Valve Construction : Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster Powder coating, Sheet metal thickness : 1.60MM, ISI approved as per IS:15683:2006(Make: superimax/Cese fire/Minimax)
6
-
3680
Supplying, installing and commissioning of CO2 Type 4.5 Kg Fire Extinguisher containing Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, fittted with discharge hose, wall mounting bracket etc., Discharge Time less than 15 Secs, Controllable discharge mechanism, Range minimum 4 Meters, applicable on Class A,B,C and electrically started Fire, A Rating- 8A, B Rating 34B, Can Construction : Deep drawn & Co2 Mig welded, Valve Construction : Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster Powder coating, Sheet metal thickness : 1.60MM, ISI approved as per IS:15683:2006(Make: superimax/Cese fire/Minimax)
2
-
10426
Fire buckets (FILLED WITH SAND) round bottom type enamel painted, white inside & Red out side and Letter "FIRE" in black out side and handle with mounting bracket.
2
-
3695
FIRE FIGHTING Supplying, installation, testing and commissioning of Electric Motor Driven Pressurization Pump complete with Pump Set, Electric Motor, Base Frame and with 1 no. pressure switch, 1 no. pressure gauges, 2 nos. Butterfly valves, 1 no. NRV . PCC foundation and foundation bolts as per required for downcomer and system complete with Copper interconector from pump panel to pump drawn through PVC Rigid/Flexible Conduit(Maximum distance 5 meter) as required.
-
-
-
I) Flow rate: 900 Ltrs/Min , 2840 RPM
-
-
-
ii) Head: 35 Meter
1
-
101160
MCC PANEL Supply, installation, testing and commissioning of Floor/Wall mounted sectionalised, front operated top entry dust and vermin proof M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrienkable PVC sleeve, base frame, complete with all accessories including interconnections, earth bus etc as required.
-
-
-
INCOMING: One (1)- 63 Amp, 10 KA,4P (Class-C) MCB with 3 Nos Phase indicating lamps with control fuse/ MCB, Digital Voltmeter with selector switch.
-
-
-
OUTGOING: Two (2) - 32Amp,10KA, TP(Class-C) MCB with Star-Delta starter with O/L and Single Phasing Preventor suitable for 7.5 HP motor. ON/OFF indication lamps, Auto manual switch and ON/OFF push button.
-
-
-
One (1) - Set of Auxilliary relay for automatic operation through pressure switch.
-
-
-
PANEL AS ABOVE
1
-
51968
Providing, laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to lS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc.,fixing the pipe on the wall/ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete as required.
-
-
-
100 mm dia
20
-
1784
65mm dia
5
-
1010
Supplying and fixing single headed internal hydrant valve with instantaneous Gun metal couplings of 63 mm dia with cast iron wheel lSl marked conforming to lS 5290 (Type -A) with blank Gunmetal cap and chain as required.
1
-
4922
Supplying and fixing 63 mm dia, 15 mtr. Long RRL hose pipe with 63 mm dia Male and Female Gun metal couplings duly binded with Gl wire,rivets etc. conforming to lS 636 (type-A) as required.
2
-
8432
Supplying and fixing FirsfAid Hose Reel with MS construction spray painted in Post office Red,conforming to lS 884 with upto date amendments,complete with the following as required.
-
-
-
20 m. long 20 mm (nominal internal)dia water hose Thermoplastic (Textile reinforced) Type -2 as per lS: 12585
-
-
-
20 mm (nominal internal) dia gun metal globe valve & nozzle.
-
-
-
Drum and brackets for fixing the equipmets on wall.
-
-
-
Connections from riser with 40 mm dia stop valve (gun metal) & M.S. Pipe
2
-
4922
Supplying and fixing of hose cabinet of size 1200 mm x 2000 mm x 600 mm made of 1.6 mm thick Sainless Steel Sheet with 6 mm thick glazed glass doors i/c necessary locking arrangement suitable to accommodate internal/external hydrant with butterfly valve, 2 Nos. 15 mtr. long Hose pipe, 1No. branch pipe, mounted on wall OR raised.
1
-
21567
Supplying and fixing 2 Way FBC of CI body with 2 No. Gun Metal male instantaneous inlet couplings complete with cap and chain as required. For 100 mm dia M.S. Pipe connection conforming to lS : 904 as required With brick platform & duly painted with Post office red externally and white internally with synthetic enamel paint cornplete in all respect, for external hydrant, as required.
1
-
5366
AUTOMATIC FIRE DETECTION SYSTEM Supplying, installation, testing and commissioning of Addressable Multi Detector(Smoke cum Heat) complete with base and isolator as per direction of Engineer-in-charge.
16
-
4063
Supplying, installation, testing and commissioning of Addressable Beam(Infrared) Detector including Transmitter & Receiver, complete with base and isolator as per direction of Engineer-in-charge.
2
-
120349
Supply and installation of visual type response indicators with LED indicating lamp, housed in suitable MS enclosure with acrylic cover fixed in flush with wall to operate in conjunction with smoke/Heat detectors operating on 24 VDC installed above the false ceiling or below the false floor, complete with all accessories and fixing materials as required and as directed by Engineer-in-charge.
1
-
677
CONTROL PANEL Providing S.I.T.C of Microprocessor based Addressable Fire Alarm Control Panel (2 Loop) suitable for serving the followingg detectors & Devices in maximum with LCD display, complete with) 2 Nos 12 Volt 40 Ah SMF battery, Battery backup and also provision for 2 Nos potential free Normally open contact per loop to be used for interlocking of AHUs in the event of fire as per direction of Engineer-incharge.
1
-
244699
MCP :- Supplying, installing ,testing and commissioning of break glass type Manual call point . The Manual call point with monitor module shall be single stage type with all accessories and suitable sinages complete., the Manual call point shall be as per technical specification. and shall be of EN and LPCP listed.
1
-
4124
Electronic Hooters :- Supplying, installing ,testing and commissioning of Hooter Cum Strobe at 85 dBA @ 3m for Audible annunciation and 75cd flashing at 1 Hz for visual indication. With Control Module. The Hooter cum Strobe with Control Module shall be flush or surface mountable type with all accessories etc., complete and as per technical specification. The devices shall be of EN and LPCP listed (Make: Bosch or Equivalents)
1
-
7510
Wiring :- Supplying and drawing of 2X1.5 sq.mm PVC insulated PVC Sheathed FRLS cable in the existing surface/ recessed conduit with all accessories as per direction of Engineer-in-charge.
200
-
87
Supply, delivery and laying of following sizes of Steel Conduit in surface/ in recess alongwith other accessories and 18 swg GI wire complete for Fire Alarm wiring including painting as required and as per direction of Engineer-in-charge.
-
-
-
20mm dia
150
-
126
25mm dia
50
-
147
CCTV :- Supply and Installation of Indoor Dome IR Network Camera (1/3" CMOS sensor,mini,pixel of 2048*1536 or higher video quality,frame rate of 20fps @ 4MP,H.264,H.264_High profile &MJPEg video compression,3.6mm Fixed lens,Physical ICR filter of both day and night,30mtr IR Distance,digital WDR range,3D-DNR for noise reduction,IPv4/IPv6 network supported,IP67 rated for weather proofing,ONVIF ver 2.2 or higher,POE IEEE 802.3af,UL,FCC,CE,ISO certified).Make: W BOX/ Pelco / Honeywell
4
-
23927
Supply and Installation of Outdoor Bullet IR Network Camera (1/3" CMOS sensor,mini,pixel of 2048*1536 or higher video quality,frame rate of 20fps @ 4MP,H.264,H.264_High profile &MJPEg video compression,3.6mm Fixed lens,Physical ICR filter of both day and night,30mtr IR Distance,digital WDR range,3D-DNR for noise reduction,IPv4/IPv6 network supported,IP67 rated for weather proofing,ONVIF ver 2.2 or higher,POE IEEE 802.3af,UL,FCC,CE,ISO certified).Make: W BOX/ Pelco / Honeywell
6
-
23927
Supply and Installation of 32Ch 4K Network video Recorder added with 32TB Hardisk storage.Make: W BOX/ Pelco / Honeywell
1
-
348026
Supply and lying of 4-pair Cat6 UTP cable for camera connectivity in existing conduits.Make:Finolex, D- Link, Secureye.
150
-
54
Supply and Installation of 24port IEEE 802.3af and at POE 10/100/1000Mbps managed Switch with minimum Two combo ports with minimum PoE power budget of 375W per switch. Make: Cisco/D Link/Secureye.
1
-
33715
Supply and Installation of 32" Commercial Display.Make: Samsung/LG/Panasonic
1
-
27190
VENTILATION
-
-
-
Ducting & Grills
-
-
-
Rectangular GI Ducting
-
-
-
Supply, installation, balancing and commissioning of factroy fabricated G.S.S. (Class VIII 120 GSM) rectangular ducting complete with neoprene rubber gaskets, elbow, splitter dampers, vanes, hangers, supports etc as per approved drawings and confirming to SMACNA standard of following sheet thickness complete as required.
-
-
-
24 G ( 0.6 mm)
100
-
983
22 G (0.8 mm)
60
-
1154
Acoustic Lining of Duct
-
-
-
Supply & fixing of Acoustic lining of supply air duct and plenum with 12mm thick rigid thick board glass wool having density of 48Kg/CuM, with 25 mmX 25 mm GI section of 1.25 mm thick, at 600 mm center to center covered reinforced plastic Tissue paper & 0.5 mm thick perforated Aluminium sheet (30% perforation) fixed to inside surface of the ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc as required & as per specifications. and as per approved shop drawings.
60
-
510
Supplying, installation, testing and commissioning of following direct driven Tube axial type fan and casing suitable for smoke exhaust application & for 300 Deg C for 2 hours Class F rating. Motor shall be suitable for 415 Volt 50 c/s, 3 ph AC supply and of efficiency class IE2.The fan shall be equipped with mounting bracket & outlet cone required at discharge.
-
-
-
2500 cfm , 10 mm Spwg
4
-
31442
External Electrification
-
-
-
DG Set
-
-
-
Supplying, Installation, Testing and Commissioning of starts Silent Diesel Generating Set having prime power rating of 62.5 KVA at 0.8 pf at NTP conditions (Alternator directly coupled with Diesel Engine) suitable for automatic operation on mains failure Panel complete in all respect and comprising of following and as per specification enclosed, suitable for indoor installation.
-
-
-
A. Alternator : Self excited, self regulated, brush less type 415 Volt 3 phase 50 Hz synchronous generator delivering 62.5 KVA at 0.8 PF (lag) at NTP condition Conforming to IS/ IEC 60034- 1, screen protected self regulated + 1% regulation, IP 23 protection with insulation Class-H, AC alternator complete with, 200 Amp MCCB and outgoing terminals taken out for connecting through Cable along with all accessories.(Make:Layrosomer/stamford)
-
-
-
B. Engine : Four(4) stroke, Multi-cylinder Turbo charged Radiator Cooled Diesel Engine of suitabe BHP (to give prescribed output excluding power consumption for running Auxiliary Accessories) operating at 1500 rpm, daily fuel tank of 440 ltr capacity duly calibrated including medium class MS piping for fuel piping from day tank to Engine and back, residential type silencer, SS flexible below for exhaust pipe and 24 V DC starting arrangement with 2 Nos 12 V battery having Ampere- Hr rating as prescribed by the manufacturer of Engine along with battery charger, as required (Make:Cummins/ perkins)
-
-
-
c. Base Plate : Common base plate of required size for mounting of engine alternator set fabricated from MS channel and vibration damping arrangement with cushy foot mounting i/c painting as per standard practice of manufacturer etc. required.
-
-
-
d. Acoustic Enclosur: The acoustic enclosure is made of 14/16 gauge CRCA sheet. The salient features of acoustic enclosure are:- The enclosure is of modular construction with the provision to assemble and dismantle easily at site finished with powder coat painting of approved colour.
-
-
-
a)The Sheet metal components are Seven Tank pre treated before powder coating.
-
-
-
b)The door are gasketed with high quality EPDM gaskets to prevent leakage of sound as well as door handles are lockable type.
-
-
-
c) Specially designed attenuators to control sound at air entry and exit points.
-
-
-
d) Adequate ventilation to meet total air requirements.
-
-
-
e) Temprature of enclosure should not exceed beyond 5-7°C of ambient temperature.
-
-
-
f) Emegency shut down button from outside the enclouser.
-
-
-
g) Noise level; 75 DB (A) at 1 mtr Distance.
-
-
-
DG set as above
1
-
632077
External panel
-
-
-
Supply, installation, testing and commissioning of cubicle type sectionalised, front operated bottom entry dust and vermin proof( IP65)M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrienkable PVC sleeve, base channel, complete with all accessories including interconnections, earthing etc as required.
-
-
-
EXTERNAL PANEL
-
-
-
Busbar -400 AL busbar with SC rating of 36KA suitable for operation at 415 Volt, 50 HZ , 3 phase Supply.
-
-
-
One (1)-Incomer feeders each consisting of
-
-
-
One (1) - 400 Amp, 36 KA, 4P MCCB with 3 Nos Phase indicating lamps with control fuse/ MCB, 3 Nos 400/5 A 15VA Cl 1.0 CTs, Digital Voltmeter, Ammeter.
-
-
-
Two (2) - Outgoing Feeders 1no for bldg panel & spare each comprising of
-
-
-
One (1) - 250 Amp, 36 KA, 4P MCCB with 3 Nos Phase indicating lamps with control fuse/ MCB, 3 Nos 250/5 A 15VA Cl 1.0 CTs, Digital Voltmeter, Ammeter.
1
-
145066
Panels
-
-
-
Supply, installation, testing and commissioning of cubicle type sectionalised, front operated top entry dust and vermin proof M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrienkable PVC sleeve, base channel, complete with all accessories including interconnections, earthing etc as required.
-
-
-
FLOOR PANEL
-
-
-
Busbar -400 AL busbar with SC rating of 36KA suitable for operation at 415 Volt, 50 HZ , 3 phase Supply.
-
-
-
Two (2)-Incomer feeders each consisting of
-
-
-
One (1) - 200 Amp, 36 KA, 4P MCCB with 3 Nos Phase indicating lamps with control fuse/ MCB, 3 Nos 400/5 A 15VA Cl 1.0 CTs, Digital Voltmeter, Ammeter.
-
-
-
One set - Indicating lamp for ON/OFF/Trip and Phase indication with control fuse/ MCB.
-
-
-
One(1) - 200A 4P changeover switch
-
-
-
One (1) - 200 Amp, 36 KA, 4P MCCB
-
-
-
Four (4) - Outgoing Feeders For Ventilation comprising of
-
-
-
32 Amps. MCB TP 10 KA, 2hp DOL starter with SPPand O/L protection, ON/OFF push button , Indicating lamp, with auto/ manual selector switch, as required.
-
-
-
Twelve(12) - Outgoing Feeders each comprising of
-
-
-
One (1) 40 Amp. 25KA 4P MCCB
-
-
-
One (1) -No Feeder for External Lighting
-
-
-
One (1) 40 Amp TPN 25 KA MCCB with 32 Amp TP contactor, over load trip, Programmable timer for automatic switching ON and OFF of external lighting, Auto/ Manual selector switch, Auxilliary Contactor, ON/OFF push button and indication along with control fuse etc as required.
1
-
502096
PANEL AS ABOVE
-
-
-
Feeder piller for external Lighting
-
-
-
Supplying installation testing commissioning if double door feeder pillar fabricated out of 2 mm thick CRCA sheet duly painted, 200 copper busbar with neutral bus rincluding cc/ brick foundation as required including following internal fixtures.
-
-
-
1 No - 40 Amp 4P MCB Incomer
-
-
-
6 Nos - 16 Amp SP MCB Outgoing
-
-
-
1 No - 16 Amp SP MCB with 6/16 Amp socket outlet with 10 Amp modular switch and 1 No- Bracket Holder with 6 Amp Modular switch.
1
-
19312
Cable
-
-
-
Supplying & Testing of 1.1 KV grade Aluminium XLPE power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply.
-
-
-
3.5C X 120 sqmm
100
-
517
3.5C X 35 sqmm
50
-
194
Supplying & Testing of 1.1 KV grade Copper XLPE power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply.
-
-
-
3C X 6 sqmm
200
-
198
2C X 10 sqmm
500
-
226
Cable laying
-
-
-
Laying & fixing of one no. PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size on Cable Tray as required.
-
-
-
upto 35 Sqmm(clamped with 1mm thick saddle)
50
-
33
Above 95 Sqmm and upto 185 sqmm(clamped with 25/40X3mm MS flat clamp)
100
-
74
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size direct in ground including excavation (75 cm),sand cushioning,protective covering and refilling the trench etc as required
-
-
-
upto 35 Sqmm
700
-
222
Above 95 Sqmm and upto 185 sqmm
100
-
236
TERMINATION OF CABLES :-
-
-
-
Supply & Making end Termination with brass compression gland and aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade (without cost of Cable)
-
-
-
3.5C X 120 sqmm
4
-
489
3.5C X 35 sqmm
6
-
300
3C X 6 sqmm
8
-
222
2C X 10 sqmm
20
-
198
Cable tray
-
-
-
Supplying instalaltion hot dip galvanized ladder type cable tray of following size including installation along wall/ suspended from ceiling with brackets/ threaded suspenders including bends etc as required.
-
-
-
150 mm (W) X 50 mm (H) with 1.6 mm thick sheet
200
-
947
300 mm (W) X 50 mm (H) with 1.6 mm thick sheet
10
-
1340
Earthing
-
-
-
Supply & Fixing of Copper plate Earthing (600x600x3mm thick) including accessories, and providing masnory enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/coke and salt as required.
10
-
11794
Providing and fixing 25 mm X 5mm copper strip on surface or in recess for connection etc as required.
200
-
1009
Earthing with GI earth pipe 4.5 meter long,40mm dia incluiding accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required
6
-
4033
Providing and fixing earth bus of 50mm X 5mm copper strip on surface connection etc as required.
5
-
1844
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.
200
-
128
Providing and fixing 6 SWG GI wire on surface or in recess for loop earthing along with cables etc as required.
100
-
37
Supply, delivery and laying of following sizes of 2mm thick PVC Conduit concealed in wall/ column/ roof slab of the building alongwith other accessories and 18 swg GI wire complete for Electrical Wiring/Telephone / TV & Data cable wiring as required and as per direction of Engineer-in-charge.
-
-
-
20mm dia
2000
-
84
25mm dia
500
-
90
Fire supression system:- Supply, installation, testing and commissioning of 5 LB Clean Agent system complete with all necessary Clean Agent FK-5-1-12 / Novec 1230 (UL listed ) gas with PESO approved Cylinder , fitting, support , and accessories, connected with CE , PI Mark & PESO approved DLP Valve, End of Line Adaptor and Pressure Switch. Cylinder will be Helium Leak Tested to 10-7 mbar l/s for leakage proof(Make: SUPREMEX/ FIREBOY / AMEREX or equivalent )
1
-
142745
Supply & Laying of Linear pneumatic heat Detection Tube with all necessary fittings & supports.
40
-
2484
Supply, installation, testing and commissioning of Health Monitoring Panel with Audio Visual Alarm. The Panel Should have Provision for integration with Fire Alarm/ SCADA/ BMS System.(Make: SUPREMEX or equivalent)
1
-
8530
Supplying and laying UPVC pipe (80 Schedule) of following diameter burried in ground at appropriate depth for cable laying as required.
-
-
-
110 mm dia
40
-
296
FIRE EXTINGUISHERS - FIRST AID Supplying, installing and commissioning of ISI ABC Powder 4 Kg Fire Extinguisher containing Mono Ammonium Phosphate Powder 50, Stored Pressure Type,Pressure Gauge, fittted with discharge hose, wall mounting bracket etc., Discharge Time less than 15 Secs, Controllable discharge mechanism, Range minimum 4 Meters, applicable on Class A,B,C and electrically started Fire, A Rating- 8A, B Rating 34B, Can Construction : Deep drawn & Co2 Mig welded, Valve Construction : Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster Powder coating, Sheet metal thickness : 1.60MM, ISI approved as per IS:15683:2006
6
-
3680
Supplying, installing and commissioning of CO2 Type 4.5 Kg Fire Extinguisher containing Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, fittted with discharge hose, wall mounting bracket etc., Discharge Time less than 15 Secs, Controllable discharge mechanism, Range minimum 4 Meters, applicable on Class A,B,C and electrically started Fire, A Rating- 8A, B Rating 34B, Can Construction : Deep drawn & Co2 Mig welded, Valve Construction : Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster Powder coating, Sheet metal thickness : 1.60MM, ISI approved as per IS:15683:2006
2
-
10426
Fire buckets (FILLED WITH SAND) round bottom type enamel painted, white inside & Red out side and Letter "FIRE" in black out side and handle with mounting bracket.
2
-
3695
SOLAR PV Supply,installation,testing & commissioning of poly crystalline solar pv panel of 3KWp along with inverter of suitable capacity(Make: Delta/Sova/Renesys)and meeting following condition/requirement. a)Minimum capacity of solar panel shall be 300Wp b)The solar panel frame shall made of aluminium c)The support shall be made of GI d)The top cover of solar panel shall be with 6mm thick tonghend glass e)Transformerless inverter with dual MPP trackers f) Array junction box shall be suitable for PV array g)Laying of 1.1KV grade XLPE copper conductor armoured power cable with GI perforated cable tray suitable for connection from solar pv panel to inverter(Distance from solar array installation to inverter may be taken as 20 mtr) h)One number energy meter installed for showing all electrical parameter.
1
-
207671
Approved for 219 (One Hundred Nineteen items only)
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements