Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 1,27,300Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_EICCL_102812_2Bid Award Id
ViewTender No
CCE_R and B_PLB_25 of 2023_24Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Upto 1.5 Mtr Depth
438.5
101863
232.3
From 1.5 Mtr upto 3.0 Mtr Depth
177.5
44215
249.1
Filling the Foundation and Plinth, Sides of Foundation, etc. with excavated materials (excluding rock), in layers not exceeding 0.225 m in depth including cost of watering, ramming, dressing and levelling the top to proper level & gradient, cost of labour, conveyance, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge.
-
-
-
Building Proper
412.7
42384
102.7
Disposal of building rubbish / malba /rock/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved dumping ground or as approved /directed by Engineer-in-charge, including all lifts involved.etc as per the direction of Engineer-in-charge.
-
-
-
Building Proper
203.3
56112
276.01
Diluting and injecting chemical emulsion for Pre Constructional antitermite treatments and creating a continuous chemical barrier under and all round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated earth on which aprons is to be laid, suurounding of pipes and conduits etc.complete. as per specification.
-
-
-
Ground Floor
545.3
56983
104.5
Supplying & Filling foundation trenches , plinth & ditches with clean coarse river sand well watered and rammed in layers not exceeding 23 c.m. in depth with all lead and lift including cost, conveyance, loading, unloading, stacking, royalties and all cost & conveyance of water, cost of all Labour,labour ess,T&P required for the work etc. complete in all respect as directed by the Engineer- in -charge.
-
-
-
Ground Floor
621.7
311658
501.3
Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size hard crusher broken granite stone aggregate and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including all cost, conveyance, royalties and cost of all labours,labour cess, T&P etc complete as per specification & direction of the Engineer-in-charge.
-
-
-
Ground Floor
82.6
517786
6268.6
Fly Ash brick masonry in cement mortar (1:6) in Foundation and plinth using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including all cost, conveyance, royalties with all labour,labour cess and T & P required for the work complete in all respect as per specification and direction of tne Engineer-in-Charge.
-
-
-
Ground Floor
32.4
166675
5144.3
RCC M-20 using 12 mm. to 20 mm. (½” to ¾”) size (20 mm. not to exceed 25%) hard crusher broken granite stone aggregate of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with all cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per the direction of the Engineer-in-charge.
-
-
-
Column Footing
-
-
-
Ground Floor
123.2
872440
7081.5
Plinth Band
-
-
-
Ground Floor
22.2
175446
7903
Beam, Column
-
-
-
Ground Floor
62.5
931568
14905.1
Roof Slab
-
-
-
Ground Floor
82.2
1109584
13498.6
Stair case
-
-
-
Ground Floor
11.8
175280
14854.3
Lintel
-
-
-
Ground Floor
1.2
16968
14140.3
Chajja(65mm avg thickness)
-
-
-
Ground Floor
32.31
38190
1182
Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / TATA / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including all cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of the Engineer-in-charge.
-
-
-
Ground floor
377.7
3359717
8895.2
Terrace Floor
9
80291
8921.3
Providing rigid & smooth tripple stage centering and shuttering for roof slabs, balconies, pergolas and projection above 7.20m and upto 10.80m heights with all necessary props, bracing, ties and supports with level centering using bituminious paper wherever required, as per the direction of the Engineer -in-charge and dismantling and removing the shuttering after the required interval from the date of casting, including cost of all materials with transportation, taxes, loading and unloading etc. and all labour, sundries, T&P scaffolding etc. complete.
-
-
-
Ground Floor
150.3
333756
2220.6
Fly Ash brick masonry in cement mortar (1:6) in Super structure using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including all cost, conveyance, royalties with all labour,labour cess and T & P required for the work complete in all respect as per specification and direction of tne Engineer-in-Charge.
-
-
-
Ground Floor
87.8
455041
5182.7
Terrace Floor
96.4
527857
5475.7
Fly Ash brick masonry in cement mortar (1:4) in Super structure using Fly Ash bricks of 23 x 11 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including all cost, conveyance, royalties with all labour,labour cess and T & P required for the work complete in all respect as per specification and direction of tne Engineer-in-Charge.
-
-
-
Ground Floor
11.1
62437
5625
Providing and Fixing of WPC Door Frames with Recate cuts and Finished cross section size 75mm X 45mm or 30mmx50mm including cost of all matenals, cost of all labour, conveyance, laves, loading, unicacing scaffolding, staging, watering and curing, T&P esc Complete as per the direction of the Engineer-in-charge
-
-
-
Building Proper
88.8
64021
720.96
Providing 12mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with all cost, conveyance, royalties, with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect and specification and direction of the Engineer in charge.
-
-
-
Ground Floor
790.6
130290
164.8
Terrace Floor
430.8
73580
170.8
Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with all cost, conveyance, royalties, with cost of all labour,labour cess, T&P and scaffolding required for the work etc. complete in all respect as per direction of the Engineer-in-charge .
-
-
-
Ground Floor
700
163030
232.9
Terrace Floor
404.9
96487
238.3
2.5 cm thick Grading concrete (1:2:2) on roof slab with 6.7mm & down grades size hard granite crusher broken chips on new work including all cost, conveyances of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.
-
-
-
Terrace Floor
81.3
31097
382.5
Supplying, fitting & fixing of Vitrified colour printed series tiles of thickness 8mm to 10mm in floors of size 600mm x 600mm of approved make confirming to IS:13755 laid on 25 mm thick cement mortar (1:1) (1 cement : 1 course sand) and filling joints with white cement of approved quality including cost of all materials, labour, labour cess, T&P etc. required for the work all complete as per direction of the Engineer-in-charge
-
-
-
Ground Floor
52.7
62676
1189.3
Supplying, fitting & fixing of Vitrified colour printed series tiles of thickness 8mm to 10mm in dadoes, skirting and risers of steps of size 600mmx 600mm of approved make confirming to IS:13755 laid on 25 mm thick cement mortar (1:1) (1 cement : 1 course sand) jointed with slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost of all materials, labour , labour cess, T&P etc. required for the work all complete as per the direction of the Engineer-in-charge
-
-
-
Ground Floor
3.8
4917
1294
Supplying, fitting & fixing of GraniteTiles of minimum 16mm thick and above 0.10 sqm of approved make in floors over 25mm thick bed of cement mortar 1:1 jointed with cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect.(Data for 10 Sqm )
-
-
-
Ground Floor
90.6
174287
1923.7
Supplying, fitting & fixing of Granite Tiles of minimum 16mm thick and above 0.10 sqm of approved make in dadoes, skirting and risers of nsteps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge
-
-
-
Ground Floor
71
144023
2028.5
Providing and fixing of 12mm thick Clear Toughened Glass Frameless Door With Dorma Premium Fittings.Dorma Premium (9111198) Unilite Package BTS 75,UL PT 10 with Cover,UL PT 20 with Cover,UL US 10 Luck with Cover and PT 24,Dorma Premium (9137121) H Type Handle 450mm,12mm Clear Toughened Glass with Cutout and Hole, including the cost of all materials, hardware fittings, cost of all labour, conveyance, loading, unloading, T&P, etc, complete as per the direction of Engineer-in-Charge.
2.9
32895
11343.2
Providing and fixing 35 mm thick Double Leaf Flush Door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters , teak wood lipping around the edges & paste with 1mm thick laminate on both side of the flush door inclussive of SS 304 Grade 8 No’s Butt Hinges (125mm x 67mm x 2.5mm), 2 No door closer (40 - 80Kg), 2 Pair of D type Pull Handle (200mm x20 mm), 1 No Aldrop (300mm x 16mm),2 nos Door Stopper , 2 No tower Bolt (300mm x10 mm), and 2 No PVC Buffer with SS Screw etc including the cost of all materials, hardware fittings, cost of all labour, conveyance, loading, unloading, T&P, etc, complete as per the direction of Engineer-in-Charge.
10.47
114491
10935.2
Providing and fixing 35 mm thick Single Leaf Flush Door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters, teak wood lipping around the edges & paste with 1mm thick laminate on both side of the flush door inclusive of SS Matt Finish 304 Grade 4 No’s Butt Hinges (125mm x67mm x2.5mm), 1 No door closer (40 - 80Kg), 1 Pair of D type Pull Handle (200mm x20 mm), 1 No Aldrop (250mm x 16mm),1 no Door Stopper , 1 No tower Bolt (300mm x10 mm), and 1 No PVC Buffer with SS Screw etc, including the cost of all materials, hardware fittings, cost of all labour, conveyance, loading, unloading, T&P, etc, complete as per the direction of Engineer-in-Charge.
26.5
200109
7551.3
Supplying & fitting fixing of Un- plasticised Poly Vinyl Chloride (UPVC) (FENESTA/NCL VEKA LTD) Three Track -Three Panel sliding Window -60 series dully manufactured using UPVC reinforced profiles of 108mmx45mmx2.5mm for outer frames & Window sash of 39mmx58mmx2.5mm capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefabricated and welded through fusion welding the window sash shall be fixed with 6mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant & the system is to be installed using Reinforced Large Coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing /deglazing at site etc. including cost and conveyance of all materials, accessories,labour charges, materials and product and product conforming to ASTM D 638-14 EN-477-95 and Other applicable codes and standards as per direction of the Engineer-in-charge
11.1
66422
5984
Supplying & fitting fixing of Un- plasticised Poly Vinyl Chloride (UPVC) (FENESTA/NCL VEKA LTD) Ventilator/Top Hung -60 series dully manufactured using UPVC reinforced profiles of 60mmx55mmx2.5mm for outer frames ,75mmx60mmx2.25mm for Casement Window sash profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefabricated and welded through fusion welding the window sash shall be fixed with 6mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant acessories like clipping locking system made of aluminium 1 No. per set of sashes & the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing /deglazing at site etc. including cost and conveyance of all materials, accessories,labour charges, materials and product and product conforming to ASTM D 638-14 EN-477-95 and Other applicable codes and standards etc. completeas per direction of Engineer in charge.
2.2
15653
7115
Supplying of M.S. Grills/shutter of approved quality and design to windows and openings and staircase railing and parapet railings etc including making holes in walls and RCC structures or wood work etc in proper position making good the damages of walls or RCC or other structures complete including bending or cutting sizes or grooves in chowkhats with all cost and conveyance of all materials labour , labour cess with T&P required for the work and royalities etc.complete (including screws) in all respect in all floors as per the direction of Engineer-in-Charge .
278
16012
57.6
Supplying, fitting and fixing hand railing of Stainless steel of 304 grade using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with all cost, conveyance, taxes of all materials, cost of all labour, T&P etc. required for the complete in all respect as per direction of the Engineer-in-charge.
-
-
-
Ground Floor
8.1
2355
290.8
First Floor
7
2035
290.8
Wall painting 2 coats with Plastic Emulsion Paint of approved make including sand papering, cost of scafolding, staging charges with cost of all materials, labour, conveyance, royalties, scaffolding, watering, curing, sundries, tools and plants etc as per the direction of Engineer-in-charge.
-
-
-
Ground floor
1279.9
199664
156
Terrace Floor
404.9
64500
159.3
Providing and applying two coats of Weather Coat Paint of approved make, quality and shade to the external surface of the building over a coat of primer of approved make and finished smooth and even surface to receive painting of approved shade and quality after cleaning the plastered surface perfectly by watering and brushing including cost of material, putty, paint, brushes, all labour, taxes, loading, unloading, scaffolding, T&P etc. as required for the work as per the direction of Engineer-in-charge.
-
-
-
Ground floor
790.6
117878
149.1
Terrace Floor
430.8
66601
154.6
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).
71.7
23057
321.58
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:(a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:
(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.(c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.(d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.
(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineerin- Charge.
Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub- head. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. up to two decimal places. Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately. The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NABL
accredited lab or by any other accreditation body which operates in accordance
with ISO/ IEC 17011 and accredits labs as per ISO/ IEC 17025.
10
25604
2560.4
Extra for openable side top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4- point cremone locking sets with stainless steel plates, handles, buffers etc including necessary stainless steel screws fasteners, nuts bolts washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge
1.6
4393
2746
Providing and laying plain cement concrete of proportion (1:2:4) in foundation and floors using 4 cm. size hard crusher broken granite stone aggregate and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including all cost, conveyance, royalties and cost of all labours,labour cess, T&P etc complete as per specification & direction of the Engineer-in-charge.
2.5
19321
7728.4
INTERNAL PH
Supplying all materials , labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes conforming to IS: 15778 and G.I pipe fittings of the following nominal bore with clamps including making good the wall,ceiling and floor ,testing all complete as per P.H. specification and direction of Engineer-in-charge
-
-
-
25mm dia PVC ASTM pipe (sch-80)
52
11731
225.6
32mm dia PVC ASTM pipe (sch-80)
38
11354
298.8
40mm dia PVC ASTM pipe (sch-80)
34
13746
404.3
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
15mm dia CP angle stop cock (Jaquar Make)
23
19809
861.3
15mm dia Two way bib cock (Jaquar make)
3
3765
1255
15mm dia Long Body Bib Cock (Jaquar Make)
4
5807
1451.9
15mm dia CP bib cock (Jaquar Make)
9
9745
1082.8
20mm dia CP concealed stop cock (Jaquar Make)
4
4331
1082.8
25mm dia brass full way valve (Shakti make)
3
3594
1198.3
32mm dia brass full way valve (Shakti make)
3
5261
1753.9
15mm dia CP Health Fucet (Jaquar Make)
3
4946
1648.7
15mm CP Extension piece
8
420
52.6
125mm CP grating
14
1100
78.6
15mm size C.P. flange
43
3328
77.4
Toilet Paper Holder
3
2958
986
Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge
-
-
-
2000 liters capacity PVC water storage tank
1
43198
43198.7
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.
20
1040
52
Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge
30
5151
171.7
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
52
11325
217.8
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
48
23212
483.6
110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)
8
3978
497.3
110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
8
2348
293.6
110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
10
2320
232
110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
6
2444
407.4
110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
2
116
58.2
110mm U-PVC HR Bend(Ori Plast/Finolex/Supreme Make)
4
1629
407.4
110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make)
6
2742
457.1
110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
10
3227
322.7
110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make)
10
5512
551.2
110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make)
8
3088
386
110mm U-PVC Plain shoe bend(Ori Plast/Finolex/Supreme Make)
6
1350
225.1
110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
12
1921
160.1
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
580mm size Orissa pan (Hindware/Parryware/Neycer make)
2
7599
3799.7
Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
-
-
-
10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
2
4492
2246.4
Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge
3
7860
2620.2
Supplying all materials,labour,T&P and fixing Flat back lipped wall (stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal
3
17411
5803.7
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge.JAQUAR SINGLE PIECE-WATER COLSET P TRAP - LYS-WHT-0204P
3
59974
19991.6
Differently Abled series (1no)
-
-
-
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
-
-
-
Under Counter basin(560x450)Hindware-No.10095
1
5273
5273.2
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
-
-
-
600mmx450mm size B.E mirror (swivelled type)
1
621
621.5
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge.SINGLE PIECE-WATER COLSET P TRAP - LYS-WHT-0204P
1
19991
19991.6
CP soap Dish holder (Jaquar make) CAN - MCH - 1131N
1
664
664.4
CP towel ring (Jaquar) CAN - ANQ - 1121
1
994
994.2
Grab bar 692 mm long (WAC - SAP - BR 0600CS )
2
11728
5864
Grab bar vertical Swing (WAC - SAP - BG 0800CS )
2
32707
16353.92
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
-
-
-
Under Counter basin(560x450)Hindware-No.10095
6
31639
5273.2
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
25mmx600mm long CP towel rail
7
4909
701.4
Towel ring
9
4217
468.6
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.
-
-
-
600mmx125mm plate glass shelf with CP/NP guard rails.
9
5429
603.3
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
-
-
-
600mmx450mm size B.E mirror (swivelled type)
9
5784
642.7
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge
-
-
-
Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
3
32354
10784.7
Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site.
0.5
242
484.9
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
4.24
18581
4382.4
Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed series to be pre-approved by the Engineer-in-charge )
-
-
-
Kajaria tile 30cmx30cm
56.5
51155
905.4
Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge )
-
-
-
Kajaria tile 30cmx20cm
136.53
116883
856.1
Granite
1.67
3019
1808.1
Providing fitting, fixing of Aluminium door with anodized AL. door section of 9202 as vertical member,9201 as top and 9200 as middle bottom member with frame section No. 9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle No. 1855 Including all Cost of Labour. T&P hire charges of drilling machine. labour charges etc. complete. Ref : OBI10
11.18
57469
5140.37
Ext. S/D Portion
-
-
-
Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
1
25019
25019.3
02 no 20 User Septic tank of size 2.3m x 1.1m x 2.1m inside dimension
-
-
-
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.
(3.9m x 2.7m x 1.5m) Cum
15.8
3533
223.67
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial lift.
(3.9m x 2.7m x 1m)
10.53
2528
240.1
Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.
(3.9m x 2.7m x 2.5m) - (2.9m x 1.7m x 1.8m) Cum
17.45
2168
124.26
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
(3.9m x 2.7m x 0.2m) + (2.3m x 1.1m x 0.05m) Cum
2.23
14835
6652.5
Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.
(2.9m x 1.7m x 012m) Cum
0.59
4309
7304.1
Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
Steel at 1.3% of concrete= (0.59 x 1.3 x 78.5 / 100) Qntl
0.6
5564
9274.1
Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge
-
-
-
RCC floor, roof slab chhaja up to 4.430 m height
(2.9m x 1.7m)
4.93
3312
672
Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB brick having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge.
(2.9m x 0.3m x 2.1m x 2 + 1.7m x 0.3m x 2.1m x 2) Cum
5.8
31829
5487.9
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
(2.9m x 2.1m x 2 + 1.7m x 2.1m x 2 + 2.3m x 2.1m x 2 + 1.1m x 2.1m x2) Sqm
33.6
5886
175.2
Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge
33.6
1118
33.3
Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge.
1.97
985
500.2
Internal EI Works Recessed wiring to light points / fan points/ Exhaust fan / call bell point with 1.5mm2 FR LSH /LSZH PVC insulated SC multistrand copper conductor of ISI marked (Finolex/ Havells/ Polycab/KEI/ Anchor or equivalent reputed make IS category) with 20mm dia non-metalic PVC flexible conduit (Make- AKJ/ KINJAL/ POLYCAB/ ANCHOR/ BEC or equvalent reputed make) with 5/6Amp., 250V Modular switch ISI marked and ceeling rose of ISI marked (Make Anchor- (Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Vision)) mounted an Modular G.I. box with Modular base and cover of suitable size (Make Anchor- (Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Vision) or or equivalent reputed make IS category), with 1.5sq.mm FRLS PVC insulated single core multistrand Cu. condoctor as earth wire including all accessories and connection. As per direction of Engineer in Charge. (Make of wire Finolex / L&T/Havells/ Anchor / KEI/ Polycab/ V-Guard or equivalent reputed make IS category)
-
-
-
Group -A
56
31528
563
Group-B.
94
76046
809
Group-C.
75
83850
1118
Supply and fixing of 6Amp 3Pin modular socket with 6Amp modular switch on existing board. (Make Anchor- (Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Vision).or equivalent reputed make IS category)
6
1374
229
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. (Make Anchor- (Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Vision) or equivalent reputed make IS category)
3
1542
514
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. (Make Anchor- (Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Vision) or equivalent reputed make IS category)
5
3255
651
Supply and fixing of 3 nos. of 3 pin 5/6 amp modular socket and S.P. 5/6 amp one way modular switch, 1 no. of 5 pin 15/16 sockety out let and S.P. 15/16 A one way modular switch on modular G.I. Box with modular base and cover. (Make Anchor- (Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Vision) or equilvalent reputed make)
12
26232
2186
Recessed wiring to submain in the following sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metalic heavy duty flexible conduit 1.6mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required. (Make of wire Finolex /Havells/ KEI/ Polycab/ L&T/ Anchor or equivalent reputed make IS category) a) 1x2.5mm2 for Inverter wiring.
151
9060
60
b) 2x1.5mm2 + 1x1.5mm2. in 20mm dia
772
104992
136
c) 2x2.5mm2 + 1x1.5mm2. in 20mm dia
251
37650
150
d) 2x4mm2 + 1x1.5mm2 in 20mm dia
100
16700
167
e) 2x6mm2 + 1x2.5mm2 in 25mm dia
80
15840
198
f) 4x10mm2 + 2x4mm2 in 32mm dia
18
7614
423
Supply and fixing of single pole and neutral sheet steel. MCB distribution board consumer unit 240V surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required (But with out MCB/ RCCB/ ISOLATOR) (Make- L&T/ Legrand/ Schneider/ Hager or equivalent reputed make)
-
-
-
a)12 way double door (DB)
3
5745
1915
Supply and fixing of 5amp to 32 amp rating 240V "B" series miniature circuit breaker suitable for lighting and other loads of the following poles in t he existing MCB DB ISI marked complete with connections testing and commissioning etc. as required. (Make- Legrand/ L&T/ Schneider/Hager or equivalent make)
a) Gr. Floor 6Amp rating to 32Amp (SP) MCB
30
6780
226
b) 63Amp (DP) MCB
3
6636
2212
supplying and fixing of call bell / buzzer ISI marked suitable for DC / AC single phase 230 volts complete as required.
2
244
122
S/F of Modular type ceiling fan regulator in existing swicth box including connection with 1.5sq.mm FR PVC insulated single core multistrand copper conductor, earthing the regulator as required. (Make Anchor- Roma Urban/ Legrand myrius/ Schneider opale/ Crabtree Athena/ L&T Engleze or eqivalent reputed make of IS Category)
25
11925
477
S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose.(Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Vision)or equievalant reputed make & model A catagory ISI marked
10
170
17
Supply of PVC Al. Armored cables ISI marked. (Make- Glowstar/ Polycab/ Nicco/ KEI as per Letter No- 309 19.01.2011 of SEEC (R&B) Odisha)
-
-
-
a) 50sq.mm 3 1/2 core
60
17100
285
Supplying and making end termination with brass compression gland & alluminium lugs for following size of PVC insulated cable.
-
-
-
a) 3 & 1/2 x 50 sq. mm
2
704
352
MV Cable laying exceeding 25sq.mm. to 120mm.sq. in ground
Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1KV grade of size excedding 25sq.mm but not exceeding 120sq.mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
25
3750
150
a) Laying of cable on surface with steel shaddle.
-
-
-
b) MV Cable laying exceeding 25sq.mm and upto 120sq.mm on surface.
25
3325
133
SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF INDOOR PANNEL BOARD WITH DANGER BOARD. (S/F OF 160A. PANNEL BOARD 48"x42"x12")
-
-
-
a) 16/18 SWG PANNEL BOX 48"x42"x5"= sq.inch for single door made out of CR sheet of 16SWG and boarder angle frame to provide above pannel with proper space, hinges and other accessories, hinged door must be painted one coated red oxide and two coat enamel gray paint 10080sq.inch @1.51.
10080
15220
1.51
b) Supply and fixing of internal wiring to equipment installed in the pannel board with required size of copper multistrand sinlge core cables duly crimped with copper lugs and all connections 48" x 42" including cost of copper conductor and other fittings like gasket, screw, nut and bolt, insulating materials etc. 2016sq. inch@ 0.87.
2016
1753
0.87
c) S/F of Bus bar (35x5)mm with required size of insulating materials nut & bolts. (Power + light)
10
7220
722
d) S/F of 160AMP. 4P 36kA MCCB of L&T / Siemens / Legrand / Hager make.
1
17086
17086
e) S/F of DN4 Extended Rotary Handle.
1
3977
3977
f) S/F of Spreader Terminal - 4Pole.
1
1672
1672
j) S/F of Ammeter with selector switch including all connections.
1
1398
1398
k) S/F of Voltmeter with selector switch including all connections.
1
1398
1398
l) S/F of indicator lamp with toggler switch and fuse.
3
726
242
m) S/F of CT coil upto 400AMP. Including all connectios.
3
2580
860
o) S/F of 63A. DP MCB make (L&T / Siemens / Legrand/Hager)
6
6846
1141
S/F of 160Amp 4Pole Change over switch (Make- L&T/ Legrand/ Hager)
1
14121
14121
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements