Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 1,62,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_EICCL_67037_9Bid Award Id
ViewTender No
S.E.Ctc.(RandB)23/2020-21Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Cement concrete (1:2:4) in foundation and plinth using 12mm size hard crusher broken granite stone chips of approved quality and from approved quarry including lowering, laying concrete watering, curing etc, complete to required levels laid in layers to required thickness including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge
43.51
-
5913.02
... More
RCC work of M-20 Grade with 20mm and down graded size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts including form works including cost, conveyance, cost of all labour, T&P, cost of all materials etc. complete as per direction and specification of Engineer-in-charge. Foundatio and base
324.37
-
4952.21
... More
Grade Beam
17.35
-
5304.22
... More
Column in Superstructure GF
24.23
-
12018.84
... More
1st floor
24.23
-
13538.95
... More
2nd floor
5.37
-
15359.25
... More
Roof Beam GF
19.38
-
12018.84
... More
1st floor
16.45
-
13538.95
... More
Roof Slab GF
25.29
-
9031.69
... More
1st floor
22.66
-
9954.37
... More
Lintel GF
1.75
-
8406.73
... More
1st floor
1.75
-
9204.42
... More
Chajja GF
18.53
-
777.48
... More
1st floor
18.36
-
875.47
... More
Stair case GF
6.92
-
10087.62
... More
1st floor
6.79
-
11221.48
... More
2nd floor
5.01
-
12578.29
... More
Providing 2.5cm thick grading concrete of prop.(1:2:2) using 6mm size H.G. chips of approved quality & from approved quarry including watering, curing with cost, conveyances, taxes of all materials, cost of all labour, T&P required for the work etc. complete as per direction of Engineer-in-charge (1st floor)
197.69
-
286.92
... More
Cutting, straightening coiled or bent up M.S. Rod or tor steel using SAIL/RINL/TATA/JINDAL STEEL/ SHYAM STEEL including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge Ground floor
419.73
-
7856.9
... More
1st floor
104.04
-
7880.1
... More
2nd floor
16.12
-
7904.4
... More
Fly Ash Bricks masonry (25cmx12cmx8cm) having crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before use in Foundation and Plinth and for ornamental flower beds, plinth moulding and similar such type of works with all necessary projections, cutting, circular moulding, corbelling, watering, curing etc. including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc. complete along with testing of strength as per relevant I.S.standard andas per specification & direction of Engineer-in-charge. Ground floor
78.63
-
4115.63
... More
Fly Ash Bricks masonry (25cmx12cmx8cm) having crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before use in Superstructure and for ornamental flower beds, plinth moulding and similar such type of works with all necessary projections, cutting, circular moulding, corbelling, watering, curing etc. including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc. complete along with testing of strength as per relevant I.S.standard andas per specification & direction of Engineer-in-charge. Ground floor
96.08
-
4148.96
... More
1st floor
97.28
-
4391.6
... More
2nd floor
32.12
-
4670.65
... More
Fly Ash Bricks masonry (25cmx12cmx8cm) having crushing strength not less than 75Kg/sqcm in cement mortar (1:4) after immersing the bricks for six hours in water before use in Superstructure and for ornamental flower beds, plinth moulding and similar such type of works with all necessary projections, cutting, circular moulding, corbelling, watering, curing etc. including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc. complete along with testing of strength as per relevant I.S.standard andas per specification & direction of Engineer-in-charge. Ground floor
2.7
-
4356.99
... More
1st floor
2.7
-
4599.64
... More
Providing 12mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to outside surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge(Ground floor)
539.94
-
134
... More
1st floor
544.69
-
139.03
... More
2nd floor
144.53
-
144.31
... More
Providing 16mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to outside surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge(Ground floor)
406.23
-
191.47
... More
1st floor
410.97
-
195.95
... More
2nd floor
130
-
200.57
... More
Providing 6mm thick cement plaster.(1:4) to RCC surface finished smooth including closed deep chiping and slury treatment including watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge GF
199.89
-
150.95
... More
1st floor
179.28
-
154.47
... More
Providing 12mm thick cement plaster.(1:4) finished smooth including closed deep chiping and slury treatment including watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge GF
28.36
-
145.73
... More
Providing fitting and fixing of Eurocon floor tiles of approved make over 25mm thick bed of cement mortar(1:1) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge All floor
188.96
-
858.92
... More
Providing fitting and fixing of Vetrified tiles (Johnson/Somany/Kajaria make) in floors of approved make over 20mm thick bed of cement mortar(1:4) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge All floor
33.61
-
928.13
... More
Providing fitting and fixing of Marble tiles above 0.40 sqm size on floors of approved make over 25mm thick bed of cement mortar(1:1) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge All floor
259.2
-
1196.28
... More
Providing fitting and fixing of Ceramic glazed floor tiles in floors , treads or steps and landings of approved make over 25mm thick bed of cement mortar(1:1) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge All floor
22.8
-
698.97
... More
Providing fitting and fixing of Ceramic glazed wall tiles in floors , treads or steps and landings of approved make over 12mm thick bed of cement mortar(1:3 jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge All floor
255.54
-
687.78
... More
Providing 2.5cm thick A.S. flooring of prop.(1:2:2) using 12mm size H.G. chips of approved quality & from approved quarry including watering, curing with cost, conveyances, taxes of all materials, cost of all labour, T&P required for the work etc. complete as per direction of Engineer-in-charge
56.76
-
301.15
... More
Providing well dressed seasoned sal wood choukaths including cost, conveyance, taxses, cost of all labour, T&P etc complete as per specification and direction of Engineer in charge
1.39
-
57918.06
... More
Supplying and fixing of W.I.Clamps of 25cm to 30cm and 35mmx5mmsize for door, windows etc with cost of materials and labour etc complete as per specification and direction of Engineer in charge
66
-
18.48
... More
Supplying and Proviiding of 30mm thick flush door shutters made out of 30mm thick solid core type Block Board as per IS-2202 with 1mm thick approved laminated and 5mm thick vision panel of 6"x9" with teak wood beading and door closure with cost of materials and labour etc complete as per specification and direction of Engineer in charge
18.84
-
7033.92
... More
Providing fitting and fixing of UPVC sliding window (3 track 2 to 2 pannel) of Wintech/ Torfenster/ Fenesta make and required size including cost, conveyance, taxes of all materials etc complete as per specification and direction of Engineer-in-charge GF and FF
64.2
-
7521.37
... More
Providing and fixing of 5mm thick glass fitted with rubber beading etc. including all cost of materials, labour, T&P etc. as per specification and direction of Engineer in charge.
3.66
-
503.2
... More
Providing, fitting & fixing of Factory made single leaf rigid FRP (alternately called GRP) sandwich composite door shutter of 32 mm thick, laminated with two GRP skins with wood grain finish, fabricated using UV-stabilized Isopthalic Gelcoat and one layer of 450 gsm. E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic, polyester resin. The thickness of the skins shall not be less than 1.5 mm. Expanded Polystyrene (EPS) structural foam panel of 29 mm thickness and a density of 20 kg/Cu.mtr. shall be used as core material. Wooden reinforcements made of seasoned Sal Wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinforcements for fixing the metal fittings such as tower bolts, aldrops, handles, etc. shall be provided. A structural adhesive compatible with EPS) foam shall be used for bending the core material, the sal wood reinforcements and the skins.The material and process for manufacturing the door shutters shall confirm to RV-TIFAC composites Design Centre’s standards and specifications and the door shutters tested in confirmation to IS 4020-1998. The finish of door shutter will be plain colour white/Ivory/Beige/Light grey/Mahogany/Teak wood or any other colour using high quality pigments. All FRP materials for use must be procured from registered manufacturing agencies under EPM contracts etc. after conducting/collecting necessary strength tests report as per required specification and relevant codal practice
10.72
-
2506.6
... More
Providing, fitting & fixing of Factory made single leaf rigid FRP (alternately called GRP) sandwich composite door frame (100x75mm size) with wood grain finish, fabricated using UV-stabilized Isopthalic Gelcoat and one layer of 450 gsm. E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic, polyester resin. The thickness of the skins shall not be less than 1.5 mm. Expanded Polystyrene (EPS) structural foam panel of 29 mm thickness and a density of 20 kg/Cu.mtr. shall be used as core material. Wooden reinforcements made of seasoned Sal Wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinforcements for fixing the metal fittings such as tower bolts, aldrops, handles, etc. shall be provided. A structural adhesive compatible with EPS) foam shall be used for bending the core material, the sal wood reinforcements and the skins.The material and process for manufacturing the door shutters shall confirm to RV-TIFAC composites Design Centre’s standards and specifications and the door shutters tested in confirmation to IS 4020-1998. The finish of door shutter will be plain colour white/Ivory/Beige/Light grey/Mahogany/Teak wood or any other colour using high quality pigments. All FRP materials for use must be procured from registered manufacturing agencies under EPM contracts etc. after conducting/collecting necessary strength tests report as per required specification and relevant codal practice
30.64
-
448.3
... More
Supplying, fitting & fixing in all floors of M.S.grills and gates, with top rails, steel windows, critical frames for windows balustrades of stair case and parapet railing made out of M.S.square bar/flat as per approved drawing and design including making holes in walls and RCC structure, wood work etc and making good to the damages to walls with cement concrete(1:2:4) with hard crusher broken granite stone chips of 12mm to 20mm size(20mm size not to exceed 25%) of approved quality with cost of all materials labour, cost of welding all T&P, sundreis etc complete in all respect as per specification and direction of Engineer in charge(screws and other hardward required materials to be used in the work shall be of approved quality and specification and shall have to be supplied by the contractor at his own cost
3215.5
-
60.87
... More
Providing fitting and fixing of Granite tiles in above 0.40sqm. size of approved make over 25mm thick bed of cement mortar(1:1) jointed with neat cement slurry mixed with pigment to match the sades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge All floor
62.71
-
2031.06
... More
Providing fitting and fixing10mm thick Armstrong board ceiling 600mmx600mm panel suspended from roof by adjustable G.I. ceiling angle with spread at a distance not more than 600mm fixed to roof by rowl plug and stiff cleat and Intermediate channel framing boarding jointing including cost of materials and labour etc complete as per specification and direction of Engineer in charge
2019
-
76.65
... More
Providing, Fitting & Fixing of Stainless steel of 304 grade in handrailing of 50mm dia of 2mm thick circular pipe with balustrade of size 32mmX32mm X2mm @ 0.90mtr. C/C and stainless square pipes bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance of Materials, Labour, TandP etc required for the complete in all respect and as per specification & direction of Engineer-in-charge
207.58
-
333.55
... More
Providing fitting fixing of 2" Q.M.S. pipe of approved quality etc complete with cost of all materials and labour as per specification and direction of Engineer in charge.
55.17
-
373.21
... More
Providing fitting fixing of colour aluminium coated GCI sheet over roof of approve quality etc complete with cost of all materials and labour as per specification and direction of Engineer in charge.
52.12
-
741.83
... More
Distempering two coats over a coat of primer with any approved shade and quality with oil bound distemper in interior surface of walls up to any height & in all floors to give an even shade including cost, conveyance, taxes of all materials with labour, T&P required for the work complete in all respect as per direction of the Engineer-in-charge GF)
865.22
-
120.04
... More
1st floor
849.35
-
121.44
... More
Painting two coats with anti-fungal resistance Weather Seal Coat of approved shade over a coat of (water bound) wall primer upto any height by means of brush to outside surface of walls after cleaning the surface including watering, curring etc. complete in all floors including cost, conveyance, taxes of all materials, labours sundries T&P required for the work as per specification and direction of Engineer in charge GF
299.37
-
127.77
... More
1st floor
303.94
-
132.41
... More
2nd floor
274.63
-
137.3
... More
Painting two coats of approved synthetic enamel paint over a coat of primer to new iron work including sand papering, polishing the surface, cost, conveyances of materials and cost of all labour TandP etc complete as per specification and direction of Engineer in charge (GF)
30.52
-
189.18
... More
1st floor
27.16
-
193.72
... More
2nd floor
3.16
-
195.28
... More
Supplying, fitting and fixing of 6" PVC rain water down pipe of approved quality including cost, conveyance, taxes of all materials and labour, T&P required for the work complete in all respect as per the direction of Engineer-in-charge
170.69
-
392.85
... More
Carriage of surplus earth by mechanical means upto 5km lead including cost of all labour for loading and unloading charges, transportation and spreading in layers at the dumping area etc complete as per specification and direction of Engineer in charge
1012.55
-
149.67
... More
E.I. Works:-Recessed wiring to light point/ fan point/Exhaust fan point/Call bell point with 1.5sqmm FR PVC Insulated single core multistarand copperConductor of ISI marked with 20mm dia non metalic PVC flexible conductwith 5A 250V MODULAR type switch ISI marked and ceiling roseis marked mounted on MS Box having front modular base plate of suitable size,MS Box with 1.5sqmm FR PVC Single core multistrand copper conductor as earth wire includingall accessories and connection as per direction of Engineer in charge (Make of wire Finolex / L&T / Anchor / Havels / V-Guard / Greatwhite / HPL / MESCAB) switch make:( legrand Myrius antibacterial) light point Group-A
18
-
551
... More
-do- light point Group-B
36
-
754
... More
-do- light point Group-C
22
-
1007
... More
-do- Fan point Group-A
10
-
551
... More
-do- Fan point Group-B
18
-
754
... More
-do- Fan point Group-C
14
-
1007
... More
Recessed wiring to 5AMP/6AMP modular socket out let with 2x1.5sq mm for FR PVC insulated single core multistrand copper conductor of ISI marked in reccess 20mm dia non metalic PVC flexible conduct with piano type switch phenolic laminated sheet suitable size ISI marked, MS Box and earthing point with 1x1.5sqmm FR PVC insulated single core multistarnd copper conductor for loop earthing etc,as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / L&T / Anchor / Havels / V-Guard / Greatwhite / HPL / MESCAB) Make:( legrand Myrius antibacterial) Separate point-
6
-
518
... More
On Existing board-
30
-
234
... More
S/F of metal Box of 180mm x100 X 60 mm nominal size of surface or in cress with suitable size of phenolic laminated sheet cover infront including providing and fixing of 5 pin,15/16 Amp modular socket out let and 15/16 Amp modular switch ISI marked connection painting etc as required complete in all respect as per direction of Engineer in charge Make:( legrand Myrius antibacterial)
10
-
695
... More
Recessed Extra lead Sub-main wiring for light and fan point with inverter in 2x1.5mm2 FR PVC insulated single core multistrand copper conductor of ISI Marked confirming to IS-694/1990 in 20mm dia nonmetalic heavy duty flexible conduct 1.6 sqmm thick along with 1x1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge (Make of wire Finolex / L&T / Anchor / Havels / V-Guard / Greatwhite / HPL / MESCAB) 2x1.5 sqmm +1x1.5 sqmm 1100 Volts confirming to IS 694/1990
240
-
124
... More
Recessed wiring to Sub-main in 2x2.5 sqmm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 20mm dia non metalic heavy duty flexible conduct 1.6mm thick along with 1x1.5sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge(Make of wire Finolex / L&T / Anchor / Havels / V-Guard / Greatwhite / HPL / MESCAB) 2x2.5 sqmm +1x1.5 sqmm 1100 Volts confirming to IS 694/1990
318
-
138
... More
Recessed wiring to Sub-main in 2x4 sqmm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 20mm dia non metalic heavy duty flexible conduct 1.6mm thick along with 1x1.5sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge(Make of wire Finolex / L&T / Anchor / Havels / V-Guard / Greatwhite / HPL / MESCAB) 2x4 sq mm+1x1.5 sqmm 1100 Volts confirming to IS 694/1990
30
-
156
... More
Recessed wiring to Sub-main in 2x6 sqmm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS 694/1990 in 20mm dia non metalic heavy duty flexible conduct 1.6mm thick along with 1x1.5sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge(Make of wire Finolex / L&T / Anchor / Havels / V-Guard / Greatwhite / HPL / MESCAB) 2x6 sq mm+1x1.5 sqmm 1100 Volts confirming to IS 694/1990
136
-
186
... More
Supply of 35mmsq. mm 4 Core 1.1KV Grade ISI Marked pvc insulated pvc sheathed XLPE Alluminium Armored power Cable (Make-Polycab /Havells/Finolex/HPL)
98
-
268
... More
Supply of 10mmsq. mm 4 Core 1.1KV Grade ISI Marked pvc insulated pvc sheathed XLPE Alluminium Armored power Cable (Make-Polycab /Havells/Finolex/HPL)
23
-
155
... More
Supply and fixing of SP 6-32 A rating 240 V "B" series miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider/legrand/siemens/ABB)
40
-
314
... More
Supply and fixing of DP 6-32 A rating 240 /415V "C" series miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider/legrand/siemens/ABB)
18
-
885
... More
Supply and fixing of FP 63 A rating 240 /415V "C" series miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning complete in all respect as per direction of Engineer in charge (Make : Schneider/legrand/siemens/ABB)
1
-
2703
... More
S/F of 8 way SPN Double Door MCB Box on existgsurface / wall mounting with all connection complete in all respect as per direction of engineer incharge (Make : Schneider/legrand/siemens)
8
-
2265
... More
Sypply of 48 inch / 1200mm A.C. Celling Fan High speed metalic colour ISI Marked with all connection complete in all respect as per direction of Engineer in charge (Usha-striker/Orient PSPO summer cool/Crompton High breeze)
13
-
2403
... More
Fixing of above mentioned ceiling fan
13
-
80
... More
S/F of step type electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge( legrand Myrius antibacterial)
22
-
775
... More
S/F of 12 inch Heavy duty (Metalic Colour) Exahust Fan with wall cutting, S/F of proper size of hume pipe, concreating, plastaring, painting with all connection testing and commissioning complete in all respect as per direction of Engineer in charge(Make Almonard / Usha/Orient/Khaitan,V-guard)
20
-
2130
... More
S/F of Earthing with medium class 40mm 3Mtr. Long ISI marked GI Earth pipe including accessories such as funnel GI nut, Bolt, washer , hinged cover plate with looking arrangement, 40mm to 20GI rediusor 5nos 20mm dia holes on GI pipe required charpol salt, Excavation of earth brick work in cement mortar complete in all respect as per specification of SR 2011 and as per Direction of Engineer-in -Chage
2
-
2145
... More
Supply and laying of swg 6 gi wire in recess/surface
38
-
17
... More
S/F of A.C. point consisting of 32 Amp industrial male female socket &top with 20-32 amp single phase starter with all connection complete in all respect as per direction of engineer incharge (Make : Schneider/legrand/siemens/ Havells)
2
-
1353
... More
S/F of Bakelite Angle holder/Batten Holder of ISI marked in place of ceiling Rose complete in all respect as per direction of Engineer in charge (Make : Cona / Anchore / Havell's)
20
-
9
... More
Supply and fixing of 15 watt,CW/WW 6500K,1800 Lumen led bulb on wall ,making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Pansonic/ Great white/ LT/ wipro)
16
-
295
... More
Supply and fixing of 18 watt,CW/WW 6500K,1800 Lumen led batten on wall ,making connections, etc. as required complete in all respect as per direction of Engineer in charge (Make : Pansonic/ Great white/ LT/ wipro)( 2yrs warranty)
48
-
602
... More
S/F of Highbay light 60W new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 lightas required complete in all respect as per direction of Engineer in charge(Make : Pansonic/ Great white/ LT/ wipro)( 2yrs warranty)
12
-
8968
... More
S/F of street light 90W new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover(Make : Pansonic/ Great white/ LT/ wipro)( 2yrs warranty)
9
-
9105
... More
Fixing of Street light with G.I bracket and pipe
9
-
300
... More
S/F of 63 A cubical panel board made of 16 SWG C.R sheet with powder coated with provision of following items with fabrication erection testing & comissioning of total enclosed panel board of size not less than 30"x24"x8' with copper busbar of 100A, 415V 4strip & internal connection &(( 63 Amp 16 KA MCCB , 4 pole (3P+N) 25 KA SPD, 63 AMP Changeover, Digital Meter(Make: Legrand)) & provision for termination of incomming & out going cable , earthing,etc, complete with supply & fixing of following switch gears.
1
-
54548
... More
S/F of copper busbar of 63A 4P MCB AS INCOMER , 415V 4strip & internal connection & provision for termination of incomming & out going cable , earthing, Indicator etc,
1
-
4560
... More
Supply, installation, testing and commissioning of KOEL Green Brand Diesel Generating set of rated Capacity 15KVA with Koel green Air Cooled Engine and KOEL freen make Three Phase Alternator and AMF control panel with (PCC Foundation, 4 NosGI Pipe Earthing, 16Sqmm 4Core Aluminium Armoured XLPE Cable up to 60 Mtr) complete in all respect as per direction of Engineer in chargemake : Kirloskar
1
-
450000
... More
P.H. Works:-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge In ground floor
20mm dia C-PVC Pipes
12
-
224.1
... More
25mm dia C-PVC Pipes
72
-
302
... More
In 1st floor
20mm dia C-PVC Pipes
8
-
231.9
... More
25mm dia C-PVC Pipes
24
-
309.8
... More
40mm dia C-PVC Pipes
26
-
599.1
... More
50mm dia C-PVC Pipes
32
-
914.3
... More
Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.
250mm thick wall In Ground Floor
8
-
44.6
... More
250mm thick wall In 1st floor
6
-
45.6
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge.
In ground floor
30
-
162.3
... More
In 1st floor
23.8
-
167.1
... More
Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge.
In Ground Floor
8
-
151.3
... More
Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge.
15mm dia CP two way bib cock(CON-041KN)
6
-
984.3
... More
15 mm dia CP S.B. Bib cock(CON-037KN)
1
-
885.9
... More
15 mm dia CP L.B. Bib cock(CON-107KN)
7
-
1132
... More
15mm dia CP angle stop cock(CON-053KN)
18
-
713.6
... More
20mm dia CP Con. stop cock (CON-089KN)
5
-
1181.2
... More
15mm dia CP flange
35
-
40.3
... More
15mm Cp extention piece
35
-
59.3
... More
25mm brass full way valve
5
-
925.2
... More
40mm brass full way valve
4
-
1720.8
... More
50mm brass full way valve
4
-
2550
... More
125mmdia C.P.grating
18
-
82.1
... More
15mm dia CP revolving shower (EOS-ESS-491)
3
-
787.5
... More
15mm dia CP hand shower with reebit cleaning system (ABC chrome plated-Jaquar make)
6
-
931.3
... More
600mm x 125mm C.P glass shelf (ACN -1171N)
8
-
1870.2
... More
CP towel rail (25 mm)(ACN-1111N)
7
-
1082.8
... More
C.P towel ring(ACN-1121N)
8
-
1033.5
... More
CP soap holder(ACN-1131N)
10
-
566
... More
Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge.
10 litres capacity pvc low level cistern (Slimline-white)
7
-
1479
... More
Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 3.18m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge
2000litre capacity water storage tanks(Sintex make) (2nd Floor)
4
-
33888.7
... More
Supplying all materials, labour,T&P and fitting and fixing ferrule of the following nominal bore including drilling the water main (Cast Iron pipes or pipes with the metal straps) as per Specification and direction of the Engineer in charge.
20mm dia Ferrule Connection
1
-
1700.2
... More
Supplying all materials, labour, T&P and providing, fitting and fixing suitable monoblock centrifugal pumpset with electric motor conforming to IS: 9079/89 with the following specifications with starter to run on 1 phase/3 phase line voltage ranging from 180 volt to 280 volt/320 volt to 450 volt on a concrete(cement concrete 1:2:4 with 12mm hg chips) base securely fixed with nuts and bolts, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge
1.00 H.P single phase centrifugal pump set
1
-
6827.1
... More
Supplying all materials, labour, T&P and providing & electrification to submerssible pump sets and service connection including fitting fixing of electric board & Switch etc all complete as per direction of the Engineer in charge.
1
-
1500
... More
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 120 PSS UV of size 750x570x1350mm height with water storage capacity 120 liters along with 3 nos of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge.
1
-
95282
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge
110mm dia U-PVC SWR pipes(Supreme/Ashirvad)
98
-
316.1
... More
110mm U-PVC door Tee
18
-
137.2
... More
110mm U-PVC plain Tee
6
-
115.2
... More
110mm U-PVC door bend
8
-
131.7
... More
110mm U-PVC plain bend
18
-
72.3
... More
110mm dia U-PVC off set
6
-
115.2
... More
110mm dia U-PVC 'P' trap
18
-
225
... More
110mm dia U-PVC cowl
9
-
38.4
... More
110mm dia U-PVC clamp
40
-
29.3
... More
Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI/PVC SWR pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge
250mm to 375mm thick wall
18
-
185.5
... More
Supplying all materials, labour, T&P and cutting hole in R.C.C roofs,cornice, etc for passing H.C.I Pipes /U.P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge.
8
-
151.5
... More
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge
580mm size Orissa pan (Parryware/Cera/ Nycer Make)
1
-
2251.6
... More
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge
a.European water closet with ‘S’ trap plain (Parrywere/Hindware/Nicer Make)
6
-
2612.5
... More
Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge
Squatting urinal (Parryware make)
2
-
2786
... More
Supplying all materials, labour, T&P and fixing bowl pattern urinal of the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge.
Half stall urinal (Jaquar)URS-WHT-13261.
2
-
4031.3
... More
15mm CP spreader
2
-
286.6
... More
32mm CP doom waste
2
-
128.5
... More
Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps(Plaza make) capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge
550mmx400mm size wash hand basin (Parryware/Cera/ Nycer Make)
8
-
2223.5
... More
Por. Pedestall
8
-
1074.2
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge
600mmx450mm size B.E mirror
8
-
652.7
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
2.33
-
274
... More
Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor
1.95
-
4139.3
... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor
1.55
-
5756.5
... More
In first floor
1.4
-
6050.5
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
12mm thick CP (1:4) on bw- In gf
33.98
-
143.1
... More
1st floor
34.05
-
146.3
... More
Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc. complete as per direction of the Engineer in charge. (Ceramic floor tiles of premium grade Kajaria / Somany make of size 30cm x 30cm to be pre-approved by the Engineer in charge)
Ground floor
16.38
-
884.2
... More
In first floor
11.82
-
893.7
... More
Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles etc.complete as per direction of the Engineer in charge. (Ceramic wall tiles of premium grade Kajaria / Somany make size 45 x 30 special plain / printed series to be pre-approved by the Engineer in charge)
In ground floor (inside/outside)
33.98
-
869.4
... More
In first floor
34.05
-
883.9
... More
Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00 mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.
12.2
-
5440.3
... More
Supplying all materials, labour, T&P and distempering two coats to walls with distemper of approved shade on new work to give an even shade etc all complete as per specification and direction of the Engineer in charge
119.09
-
63.2
... More
Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:1.5:3) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, fly ash bricks in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI/P-trap gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge
Inside size 250mmx250mm
6
-
1350.5
... More
Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:1.5:3) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
Inside size 760mmx760mmx460mm
6
-
7713.5
... More
Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
Inside size 910mmx910mmx910mm
4
-
15058
... More
Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast RCC rings joined loose, gravel backing in the rear of well steining, precast RCC cover slab in cement concrete (1:1.5:3) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge RCC rings soakway pit 1.22m dia x 2.10m deep
2
-
14729.5
... More
Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Brick masonry soakway pit 1.80m dia x 2.60m deep
2
-
39479.1
... More
Supplying all materials, labour, T&P and providing 450mm dia x 50mm thick RCPC man hole cover in cement concrete (1:2:4) using 12mm size h.g chips, placing the cover on the man hole/ inspection chamber and finishing smooth all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge
R.C.P.C. Cover(20"/22" round Man hole cover)
12
-
1093.1
... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.
110mm dia u-pvc pipe alround concrete
48
-
1010.7
... More
160mm dia u-pvc pipe alround concrete
20
-
1648.4
... More
Construction of 50 users RCC septic tank(I/S size-5.00x1.60x2.40m)
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.
28.8
-
199.7
... More
Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.
17.28
-
214.4
... More
Supplying all materials, labour, T&P and providing shoring and shuttering foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per direction of the Engineer in charge.
45.12
-
231.2
... More
Supplying all materials, labour, T&P and providing dewatering water from pit using 5 HP disel pump set etc.all complete as per specification and direction of the Engineer in charge
12
-
59
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
2.88
-
274
... More
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor
2.78
-
4473.2
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
R.C.C floor and roof slabs, landings, balconies, projecting sunshades and chajjas up to 4.30m height
8
-
423.1
... More
R.C.C beams, columns, girder and bressmer etc--In G.F
70.44
-
721.7
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor
7.98
-
5543.2
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.
In ground floor
11.4
-
6377.4
... More
Supplying all materials, labour, T&P and providing brick work with Fly Ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:3) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In foundation and plinth
0.72
-
4753
... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor
0.64
-
5756.5
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In Ground floor
5.76
-
143.1
... More
Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor (inside)
60.35
-
149.2
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor (inside)
45.44
-
30.7
... More
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
Making MS step iron in 20mm diameter MS steel bars
7
-
192.9
... More
Supplying all materials, labour, T&P and providing, fitting and fixing U-PVC SWR Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge
160mm U-PVC plain Tee
2
-
240.8
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
15.3
-
110.9
... More
Construction of RCC UG Sump (I/s:- 2.50x 2.50x 1.65 m) Earth work in excavation of foundation in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and levelling the bed and as per direction of the Engineer in charge.
25.99
-
199.7
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
2.16
-
274
... More
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
2.16
-
4473.2
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
R.C.C floor and roof slabs up to 4.30m height
9.91
-
423.1
... More
R.C.C beams, columns, girder and bressmer etc--In G.F
35.64
-
721.7
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor
4.3
-
5543.2
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.
In ground floor
6.14
-
6377.4
... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor
0.5
-
5756.5
... More
Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor (inside)
43.63
-
149.2
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor (inside)
22.75
-
30.7
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
9.04
-
110.9
... More
Supplying all materials labour T&P for Removal of sand mud & debrises by mechaanical means including cost of materials with taxes transportation all labour T&P etc all complete as per direction of E-I-C.
15.14
-
157.5
... More
Supplying all materials, labour,T&P and fitting and fixing ferrule of the following nominal bore including drilling the water main (Cast Iron pipes or pipes with the metal straps) as per Specification and direction of the Engineer in charge.
20mm dia Ferrule Connection
1
-
1700.2
... More
Supplying all materials, labour, T&P and providing, fitting and fixing suitable monoblock centrifugal pumpset with electric motor conforming to IS: 9079/89 with the following specifications with starter to run on 1 phase/3 phase line voltage ranging from 180 volt to 280 volt/320 volt to 450 volt on a concrete(cement concrete 1:2:4 with 12mm hg chips) base securely fixed with nuts and bolts, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge
1.00 H.P single phase centrifugal pump set
1
-
6827.1
... More
Supplying all materials, labour, T&P and providing & electrification to submerssible pump sets and service connection including fitting fixing of electric board & Switch etc all complete as per direction of the Engineer in charge.
1
-
1500
... More
(Sinking of 150mm size tube well through hand boring( water jet) method)
Suplying all materials, labour, T&P and setting up boring equipments including erection of suitable staging for installation of the required size of tube well, dismantling and removing the same after complection of the work, including transportation of the boring equipments, cleaning and levelling the site, excavation of mud pit, channels etc, levelling of site all complete as per direction of Engineer in charge
1
-
11394.4
... More
Supplying all labour, T&P and transporting the boring pipes, top casing, grouting pipes, PVC pipes and fittings, PVC well screens, cement, bentinite and gravels etc to the worksite including loading and unloading etc all complete as per direction of the Engineer in charge.
1
-
1320.6
... More
Supplying all labours, T&P and drilling pilot bore not less than 102mm dia, without casing pipes in all kind of soils and rocks for the following depths excluding supply of necessary boring pipes including supply of necessary cutting equipments, extra sockets ( whenever required) etc and withdrawing the boring pipes, washing and keeping the bore logging if required all complete as per direction of Engineer in charge
Drilling pilot bore from 0 to 360 metres
75
-
912.3
... More
Supplying all labour, T&P and reaming the pilot bore to the following sizes and depth without casing pipes including withdrawing the boring pipes, washing the bore by means of pipe cylinder etc all complete as per direction off Engineer in charge.
Reaming 100mm to 150mm dia from 0-360 mtr
75
-
157.4
... More
Reaming 150mm to 200mm dia from 0-360 mtr
75
-
186.9
... More
Reaming 200mm to 300mm dia from 0-360 mtr
75
-
207
... More
Supplyimg all labour, T&P and jointing materials & lowering the 300mm dia top casing pipes into the position and removing the same after all complete as per direction of Engineer in charge
From 0-360 mtr
1
-
1464.8
... More
Supplying all labour, T&P and jointing materials and lowering the pvc casing pipes, fittings and well screens in position, including fitting and fixing of centraliser, cutter plug and washing the bore all complete as per direction of Engineer in charge
150mm dia PVC casing pipe from 0 to 360 metres
75
-
113.7
... More
Cost of 150 mm dia PVC ASTM pipe(sch-80)
75.6
-
1251.4
... More
Cost of 150mm dia Slott Cutting
6
-
300
... More
150 mm dia C.I.end/top cutter plug
2
-
350
... More
Cost & Conveyance of bentonite powder
10
-
257.64
... More
Supplying all materials, labour, T&P and packing the bore with washed gravel of river shingles of required size and specification around the well screen and pipe etc all complete as per the direction off the Engineer in charge.
Labour charges
1.5
-
1574.1
... More
Cost and Conveyance of gravel
1.5
-
404.67
... More
Supplying all materials, labour, T&P and packing the bore with river sand over the gravel pack all complete as per the direction of the Engineer in charge.
Labour charges
1.2
-
154.5
... More
Cost and Conveyance of sand
1.2
-
388.85
... More
Supplying all labour, T&P including developing the tube well with compressor ( supplied by contractor ) continuiously worked till clear & adequate discharge is obtained from the tube well including supply and use of necessary equipments and labour as per direction of the Engineer in charge.
Labour charges
1
-
2036.6
... More
Supplying all materials , labour, T&P and providing & fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D & pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction.
40mm dia HDPE pipe
30
-
147.2
... More
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submerisble electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trail running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge
1.50H.P single phase submersible pump set (KP4-03215 pumpset CP)Kirloskar/Crompton/CRRI make
1
-
15200
... More
DOL Control panel
1
-
3805.5
... More
40mm dia steel short piece
1
-
202
... More
Well cap
1
-
152.3
... More
50mm size CI bracket
2
-
91.3
... More
2.50 sqmm flat cable
50
-
128.1
... More
Steel rope with cover
40
-
26.7
... More
20mm dia rigid UPVC pipes
40
-
6.9
... More
Supplying all materials, labour, T&P and providing & electrification to submerssible pump sets and service connection including fitting fixing of electric board & Switch etc all complete as per direction of the Engineer in charge.
1
-
1500
... More
Supplying all materials, labour, T & P and constructing Bore well protection chamber of the inside size 650x650x1000 hight with cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ash brickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g. chips, 12mm thick cement plaster (1:4) inside and outside, RCC cover slab in (1:1.5:3) using 12 mm size h.g. chips, earthwork in excavation in all kind of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction pof the engineer in charge.
1
-
9347.3
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements