Works Department Tender

Supply of Elegant look 60 W AIO LED Solar Street lights having extruded alluminium housing, 150Wp or more Mono Crystalline Panel/Laminates fixed on the top of the luminaire housing, maintenance free 12.8 volts 54 Ah or more LiFePO4 battery(BIS certified) , BMS, MPPT charge controller, PIR sensor to provide 2 days (24 hrs ) back up . The luminaire is having IP 65 protection for critical components, IK 07 and having lumen output of ≥ 10000 lumen as LM 79 report of third party NABL lab . Lenses should be provided on the LED chip for better lighting dstribution to avoid glare on human eyes. Both the luminaire and Mono Crystalline Panel must be manufactured in India. The Solar lighting company must submit the third party NABL lab reports to justify the lumen efficacy,luminaire output , IK 07 and IP 65 protection) The Luminaire should be supplied along with adjustable type mounting bracket which can be fitted directly on the pole. The Solar lighting companies should submit the lighting design report prepared by their in house lighting design, if required as per the direction of engineer in charge .The Solar lighting manufacturer must submit the declaration letter by mentioning that complete solar light and the solar panel are manufactured in India and warranty certificate on their company's letterhead by mentioning warranty period as 5 years and necessary aftersales service will be provided through their tollfree base service network located within 100 KM from the project site. The Solar Street light manufacturer should have own NABL accredieted laborotory. The following test reports must be submitted and approved from S.E. ElectricalCircle (R&B) & Chief Engineer (Buildings) Odisha, Bbhubaneswar before final procurement. 1. EN50530 – MPPT Efficiency , 2.. IEC61547 , 3. IEC61000-3-2 – EMC , 4. IEC 60598-2-3 ,5. IEC 62109-1, 6 LM 79 Report (3rd Party NABL lab only) 7. IK 07 (Report of 3rd party NABL only for any wattage of AIO solar light), 8. IP 65 (report of 3rd Party NABL lab only for any wattage of AIO solar ) Make:- Philips/Panasonic/ Havells/ Bajaj/ Wipro/ Crompton or Equivalent. NB: Th cost includes 5 years CMC including repair/ maintenance/ replacement of the product in case of any defect.

Supply of 9 mtr long hot dip galvanized Octagonal pole manufactured from HT steel having base dia if 175 mm & top dia 70 mm or more and sheet thickness of 4 mm or more and 4 Nos. EN8 Grade foundation bolt. The octagonal pole shall be suitable to withstand 180 KM/HR or more wind speed by consideringthe weight & wind expose area of 1 No./2 Nos. AIO solar light to be fitted on the top of the pole and pole to be installed for ROB illumination. Make:- Bajaj/RR Ispat/Utkarsh or Equivalent.

Supply of specially designed L bracket of length of 1000mm-1500mm as per site requirement and height of 1000mm manufactured from GI pipe having OD pipe of 70-75mm with necessary accessories to fix the bracket at different height on the pole for successful installation of AIO solar lights from same pole to illuminate the service road.