Works Department Tender

Providing and filling sand with good river course sand and well-watered & rammed etc. complete as per the direction of Engineer-in-charge.

Cement concrete M 15 Levelling coarse with 40 mm size C.B. Metal of approved quality as per approved drawing and direction of the Engineer-in-charge including cost, conveyance, royality taxes of all materials conforming to the MORTH techanical specification.

P.C.C.M-15 Grade in Substructure of CD work using 40mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts including frame works etc as per approved Drawing & Technical Specifications and as per Section -1500, 1700, 2100 & 2200 of MoSRT&H Specifications for Road & Bridge works (Latest Revision).

RCC M25 grade Reinforced Cement Concrete in Foundation complete as per Drawing and Technical Specifications.

RCC M25 grade Reinforced Cement Concrete in sub-structure complete as per Drawing and Technical Specifications.

RCC M25 grade Reinforced Cement Concrete in super-structure complete as per Drawing and Technical Specifications.

HYSD / MORT&H Technical Specification no- 1600Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications

Providing and laying of Filter media with stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall

RCC M40 Crash Barrier at the edge of the culvert with Reinforced Cement Concrete in super-structure complete as per Drawing and Technical Specifications.

Gravel backing to approns and revetments with good quality moorum/sand and moorum admixture satisfying Liquid limit below 25 and P.I.value within 6 as per approved drawing with cost,conveyance,royalty,taxes of all materials ,all labours, T&P sundries complete as per specification and direction of Engineer-in-Charge

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. (including cost of steel)

Providing and fixing drainage spouts in deck slab with 100 mm diameter G.I pipe for finished item of work as per approved drawing and technical specifications complete in all respect as per section 900 & Clause 2705 of MoRT&H Specifications for Road & Bridge works (5th Revision) including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge.

Painting two coats on new concrete surface (By synthetic enamel paint) over one coat of primer including cost of priming.

Filling Foundation & plinth with excavated earth including cost of all , labour T&P etc. complete

Road Safety Measure Reinforced cement concrete M-15 Grade Guard Post of standard design as per IRC-25-1967 ,Fixing in position including finishing and lettering but excluding painting etc complete

Supplying, fitting, fixing of roads sign board as per approve drawing including cost, conveyance, royality, taxes of all materials, labour, T & P etc. providing and fixing of retroreflectorised cautionary, mandatory and informatory sign as per IRC: 67-2010 made of A.C.P. (Aluminium composite panel) used for sign boards with a thermoplastic core of low density polyethylene (LDPE) between two thick sheets of aluminium with over all thickness of 4mm and aluminum thickness of 0.5mm on both sides as per requirement in table 6.1 of IRC-67/2010 and as per technical specifically of clause 801.3 supported on a mild steel angle iron post 75mm x 75mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 40cm x 40cm x 60cm. 60cm below ground level as per approved drawing including excavation, curring etc. complete under the supervision of Engineer-in-charge. (a) 90 cm equilateral triangle

(b) 80 cm x 60 cm rectangular

(c) 90 cm x 45 cm rectangular

(d) 60 cm circular (Speed limit)

(e) 90 cm octagon

(f) 60 cm x 50 cm