Works Department Tender

Earth work in excavation of in disintegrated rock not requiring blasting to be removed by pick axes and crow bars and depositing material with initial lead and lift including dressing the sides & leveling the bed of the foundation to the required width & required depth including dewatering if necessary and stacking the excavated materials away from working area etc.complete and as per specification and as per the direction of Engineer-in-charge.

Blasting hard rock and compacted sheet rock excluding sand stone measured in solid including jumping holes cost of explosive fuse, detonator etc and stacking the blasted debris clear of work within 50 m lead etc complete as per the direction of the Engineer-in-charge.

Earth work in ordinary soil within 50m lead and 1.5m initial lift including rough dressing and breaking clodds to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in deptg and as per direction of EIC.

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause of MORD and as per the direction of the Engineer-in-charge

Providing granular sub-base using moorum CBR value not less than 20 & PI value not more than 6 mix with required proportion of sand of approved quality including cost, conveyance, royalty & taxes including cost of T&P articles required for the work etc. complete & labour for spreading moorum in layers not exceeding 23cm. thickness watering & compacting to the requried density at OMC with power road roller including cost & carriage of water, all T&P articles with hire & running charges of machineries such as PRR etc. required for the work complete in all respect as per specification & direction of the Engineer- in-Charge.

Providing and fixing of typical informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be we be welded to 2 nos. 75mmX75mm of12 SWG sheet tubes posts duly embeded in cement concrete M-15 grade block of 450mm X450mmmm X600mm ,600mm below ground level. The top most diamond plate will be welded to middle plate by 47mmX 47mm of 12 SWG steel plate tube. All M.S will be stove embelded on both sides .Lettering and printing arrows border etc. will be painted with ready mixed synthetic enamelpaint of superior quality in required shade andcloure.All sections of framed posts and steel tube will be painted with primer and two coat of epoxy paint as per drawing clause 1701 and Annexure 1700.1

Supplying, fitting, fixing of information board as per approve drawing including cost, conveyance, royalty, taxes of all materials, labours, T&P etc. providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per IRC: 67-2010 made of A.C.P(aluminium composite panel) used for sign boards with a thermoplastic core of low density polythelyne (LDPE) between two thick sheets of aluminium with all over all thickness of 4 mm and aluminium thickness of 0.5 mm on both sides as per requirement in table 6.1 of IRC+67/2010 and as per technical specification of clause 801.3 supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 40cm x 40cm x 60cm, 60cm below ground level as per approved drawing including excavation, curing etc complete under the supervision of Engineer-in-charge..

Provision for Road sinage masonary structure for citizen information board,painting of 200 m & k.m stone etc complete and as per the direction of engineer in charge.

i) 5th Kilometer stone

iI) Ordinary Kilometer stone

iii) 200 mm stone

Semi-reflectorised Sign Boards

200 mm dia RCC guard post.