Works Department Tender

S/F of 5 KVA (90Volt to 270Volt) Voltage Stabilizer (Make V-Guard / CG/ Microctek.)

S/F of 6 sq.mm 2 core PVC Al. Armored cables ISI marked. (Make- Polycab/ Havells/ KEI.

laying of 6 sq.mm 2 core PVC Al. Armored cables on wall surface by clamping with Steel Shaddle.

S/F of end terminal with brass compresson gland and al lugs for 2 Core 6 mmsq pvc insulated cable

Supply and Fixing of single pole and neutral, sheet steel, MCB distribution, 415V on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, inter connections, phosphatized and powder painted including earthing etc. as required (But with out MCB/ RCCB / Isolator) (Make- L&T/ Legrand/ Schneider/ ABB) a) 2 way single door

Supply and fixing of 32Amp (SP) MCB rating 240V "C" series miniature circuit breaker suitable for lighting and other loads of the following poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required. (Make- Legrand/ L&T/ Schneider)

Recessed wiring to submain in the following sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metalic heavy duty flexible conduit 1.6mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required. (Make of wire Finolex / KEI/ Polycab/ L&T/ Anchor) a) 2x4mm2 + 1x1.5mm2

Supplying and installation of 25A AC starter Modular type, Schneider/Siemens/Legrand coil voltage-230 Volt A.C. on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

Supply of 25 sq mm 3-1/2 core XLPE insulated Aluminium Armoured cables ISI marked.(Polycab/Havells/KEI/RR Kabel/Gloster/Finolex)(Tranformer to main panel)

Sypply of 185 mm2 3.5 core XLPE insulated alluminioum armoured cable (Polycab/Havells/KEI/RR Kabel/Gloster/Finolex)

Supply of 95 sq mm 3.5 core XLPE insulated Aluminium Armoured cables ISI marked.(Polycab/Havells/KEI/RR Kabel/Gloster/Finolex)

Laying of one number of PVC insulated XLPE power cable of 1.1 KV grade of size 185 sq.mm direct in ground including excavation ,sand cushioning, protective covering and refilling the trench etc. or in surface with G.I. Support as per ISI standard and as per direction of engineer in charge as required.

Laying and fixing of one number of PVC insulated XLPE power cable of 1.1 KV grade of size 95 sq.mm on surface using steel shaddle of appropriate size as required as per ISI standard and as per direction of engineer in charge.

Laying and fixing of one number of PVC insulated XLPE power cable of 1.1 KV grade of size 25 sq.mm on surface using steel shaddle of appropriate size as required as per ISI standard and as per direction of engineer in charge.

S/F of end terminal with brass compresson gland and al lugs for 3.5 Core 25 mmsq pvc insulated cable of appropriate size as required as per ISI standard.

S/F of end terminal with brass compresson gland and al lugs for 3.5 Core 95 mmsq pvc insulated cable of appropriate size as required as per ISI standard.

S/F of end terminal with brass compresson gland and al lugs for 3.5 Core 185 mmsq pvc insulated cable of appropriate size as required as per ISI standard.

S/F of copper plate earthing (600 x 600 x 3.15mm) with running copper flat 25 x 5mm from copper plate to funnel of 40mm dia G.I pipe including salt charcoal and all accessories as required.

Supplying and laying 25x5 mm copper flat on surface or recess for connection etc as per ISI marked at 0.5meter bellow ground level for conductor earth electrode including soldering etc as required. (for main Panel 630A)

Supplying and laying 8 SWG solid cupper wire on surface or recess for connection etc as per ISI marked at 0.5meter bellow ground level for conductor earth electrode including soldering etc as required.

SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF INDOOR PANNEL BOARD WITH DANGER BOARD. (S/F OF 630A. PANNEL BOARD 36"x36"x12") Description: 1.) SIT&Commissioning of CPRI tested LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by siemens gray powder cote paint fallowed by 9 tank acid treatment is designed as G.A drawing as per direction of Engg.-in-Charge.Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board with Separate Aluminium Earth bus bar should be installed. 15552cu.inch @1.81. -1 nos. 2.) Supply and fixing of internal wiring to equipment installed in the pannel board with required size of copper multistrand sinlge core cables duly crimped with copper lugs and all connections 36" x 36" including cost of copper conductor and other fittings like gasket, screw, nut and bolt, insulating materials etc. 1296sq. inch@ 0.87. 1 nos. 3.) S/F of Bus bar (50x8)mm with required size of insulating materials nut & bolts. 10 Mtr @Rs.1653/mtr -1 nos. 4.) S/F of 630AMP. 4P 50kA MCCB of L&T / Siemens / Legrand make. 1 nos. @Rs. 45715/unit 5.) S/F of 160AMP. 4P 25kA MCCB of L&T / Siemens / Legrand make. 1 nos. @Rs. 13966/unit 6.) S/F of 250AMP. 4P 25kA MCCB of L&T / Siemens / Legrand make. 3 nos. @Rs.19071 /unit 7.) S/F of DN4 Extended Rotary Handle. 5 nos. @Rs. 3977/unit 8.) S/F of Spreader Terminal DN4-630 - 4Pole. 1 nos. @Rs. 7041/unit 9.) S/F of Spreader Terminal DN2-250 - 4Pole. 3 nos. @Rs. 1672/unit 10.) S/F of Spreader Terminal DN0-160 - 4Pole. 1 nos. @Rs. 408/unit 11) S /F of Ammeter with selector switch including all connections. 1 nos. @Rs. 1398/unit 12) S/F of Voltmeter with selector switch including all connections. 1 nos. @Rs. 1398/unit 13.) S/F of indicator lamp with toggler switch and fuse. 3 nos. @Rs. 242/unit 14). S/F of CT coil upto 400AMP. Including all connectios. 3 nos. @Rs. 860/unit 15.) S/F of Floor Rubber Mat 6'x4'x6mm size. 1 nos. @Rs. 2000/unit .

SUPPLY, INSTALLATION, TESTING & COMMISSIONING OF INDOOR PANNEL BOARD WITH DANGER BOARD. (S/F OF 250A. PANNEL BOARD 30"x24"x8") Description: 1.)SIT&Commissioning of CPRI tested LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by siemens gray powder cote paint fallowed by 9 tank acid treatment is designed as G.A drawing as per direction of Engg.-in-Charge.Warrentee period of replacement of panel & accessories must be 3 years & compelete test certificate must be submitted along with panel board with Separate Aluminium Earth bus bar should be installed 5760 cu.inch @1.81. -1 nos. 2.) Supply and fixing of internal wiring to equipment installed in the pannel board with required size of copper multistrand sinlge core cables duly crimped with copper lugs and all connections 30" x 24" including cost of copper conductor and other fittings like gasket, screw, nut and bolt, insulating materials etc. 720sq. inch@ 0.87. -1nos. 3.) S/F of Bus bar (35x5)mm with required size of insulating materials nut & bolts. 6 Mtr @Rs.722/mtr -1 nos. 4.) S/F of 250AMP. 4P 36kA MCCB of L&T / Siemens / Legrand make. 1 nos. @Rs. 19071/unit 5.) S/F of DN2 Extended Rotary Handle. 1 nos. @Rs. 3977/unit 6.) S/F of Spreader Terminal DN2-250 - 4Pole. 1 nos. @Rs. 1672/unit 7.)S/F of Ammeter with selector switch including all connections. 1 nos. @Rs. 1398/unit 8) S/F of Voltmeter with selector switch including all connections. 1 nos. @Rs. 1398/unit 9.) S/F of indicator lamp with toggler switch and fuse. 3 nos. @Rs. 242/unit 10) S/F of CT coil upto 400AMP. Including all connectios. 3 nos. @Rs. 860/unit 11.) S/F of Floor Rubber Mat 4'x3'x6mm size. 1 nos. @Rs. 600/unit 12.) 40Amp DP MCB Make: Legrand/L&T/Schnider 15 nos.@Rs.963.00/unit.