Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 4,08,900Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_EICCL_90124_3Bid Award Id
ViewTender No
CCE_R and B_PLB_03 of 2023_24Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Upto 1.5Mt depth
985
224314
227.73
From 1.5mt upto 3.0mt depth
274.5
67005
244.1
Disposal of building rubbish / malba /rock/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved dumping ground or as approved /directed by Engineer-in-charge, including all lifts involved.etc as per the direction of Engineer-in-charge.
419.83
117048
278.8
Diluting and injecting chemical emulsion for Pre Constructional antitermite treatments and creating a continuous chemical barrier under and all round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated earth on which aprons is to be laid, suurounding of pipes and conduits etc.complete. as per specification.
-
-
-
Building proper
648
87480
135
Supplying & Filling foundation trenches , plinth & ditches with clean coarse river sand well watered and rammed in layers not exceeding 23 c.m. in depth with all lead and lift including cost, conveyance, loading, unloading, stacking, royalties and all cost & conveyance of water, cost of all Labour,labour ess,T&P required for the work etc. complete in all respect as directed by the Engineer- in -charge.
-
-
-
Building proper
1316.96
887631
674
Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size hard crusher broken granite stone aggregate and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including all cost, conveyance, royalties and cost of all labours,labour cess, T&P etc complete as per specification & direction of the Engineer-in-charge.
-
-
-
Building proper
150.32
851262
5663
Fly Ash brick masonry in cement mortar (1:6) in Foundation and plinth using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including all cost, conveyance, royalties with all labour,labour cess and T & P required for the work complete in all respect as per specification and direction of tne Engineer-in-Charge.
-
-
-
Building proper
135.85
720928
5306.8
Fly Ash brick masonry in cement mortar (1:6) in Super structure using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including all cost, conveyance, royalties with all labour,labour cess and T & P required for the work complete in all respect as per specification and direction of tne Engineer-in-Charge.
-
-
-
Ground Floor
248.03
1325745
5345.1
First Floor
139.8
787465
5632.8
Second Floor
139.8
833725
5963.7
Terrace Floor
35.99
228324
6344.1
Fly Ash brick masonry in cement mortar (1:4) in Super structure using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including all cost, conveyance, royalties with all labour,labour cess and T & P required for the work complete in all respect as per specification and direction of tne Engineer-in-Charge.
-
-
-
Ground Floor
27.63
151978
5500.5
First Floor
45.71
253178
5538.8
Second Floor
45.71
266329
5826.5
RCC M-25 using 12 mm. to 20 mm. (½” to ¾”) size (20 mm. not to exceed 25%) hard crusher broken granite stone aggregate of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with all cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per the direction of the Engineer-in-charge.
-
-
-
Column Footing
257.43
1721125
6685.8
Grade Beam
33.63
252376
7504.5
Column (Ground Floor)
27
389485
14425.4
Column (First Floor)
14.3
230731
16135.1
Column (Second Floor)
14.3
260004
18182.1
Column (Terrace Floor)
1.95
40234
20633.3
Beam (Ground Floor)
33.5
483250
14425.4
Beam (First Floor)
31.7
511482
16135.1
Beam (Second Floor)
31.7
576372
18182.1
Beam (Terrace Floor)
1.38
28473
20633.3
Roof Slab (Ground Floor)
85.68
1118500
13054.4
Roof Slab (First Floor)
63.62
921841
14489.8
Roof Slab (Second Floor)
63.62
1031140
16207.8
Roof Slab (Terrace Floor)
2.66
48582
18264.1
Stair case (Ground Floor)
1.95
28039
14379.3
Stair case (First Floor)
1.95
31355
16079.8
Stair case (Second Floor)
1.95
35325
18115.8
Lintel (Ground Floor)
16.92
231963
13709.4
Lintel (First Floor)
11.86
181170
15275.8
Lintel (Second Floor)
11.86
203410
17151
Chajja (65mm average thickness)
(Ground Floor)
199.2
229259
1150.9
Chajja (65mm average thickness)
(First Floor)
174
227017
1304.7
Chajja (65mm average thickness)
(Second Floor)
174
259068
1488.9
Chajja (65mm average thickness)
(Terrace Floor)
2.6
4445
1709.7
Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / TATA / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including all cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of the Engineer-in-charge.
-
-
-
Ground floor
469.43
4210834
8970.1
First Floor
164.87
1483121
8995.7
Second floor
164.87
1487572
9022.7
Terrace Floor
9.18
83087
9050.9
Providing 12mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with all cost, conveyance, royalties, with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect and specification and direction of the Engineer in charge.
-
-
-
Ground Floor
953.14
142589
149.6
First Floor
1281.75
199312
155.5
Second Floor
1281.75
207387
161.8
Terrace Floor
338.89
57035
168.3
Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with all cost, conveyance, royalties, with cost of all labour,labour cess, T&P and scaffolding required for the work etc. complete in all respect as per direction of the Engineer-in-charge .
-
-
-
Ground Floor
1899.93
406395
213.9
First Floor
1606.95
352243
219.2
Second Floor
1606.95
361081
224.7
Terrace Floor
342.35
78843
230.3
Supplying of M.S. Grills/shutter of approved quality and design to windows and openings and staircase railing and parapet railings etc including making holes in walls and RCC structures or wood work etc in proper position making good the damages of walls or RCC or other structures complete including bending or cutting sizes or grooves in chowkhats with all cost and conveyance of all materials labour , labour cess with T&P required for the work and royalities etc.complete (including screws) in all respect in all floors as per the direction of Engineer-in-Charge .
-
-
-
Ground Floor
911.5
52502
57.6
First Floor
1129.5
65059
57.6
Second Floor
1129.5
65059
57.6
Terrace Floor
84.74
4881
57.6
Supplying, fitting & fixing of Vitrified colour printed tiles of thickness 8mm to 10mm in floors of size 600mm x 600mm of approved make confirming to IS:13755 laid on 25 mm thick cement mortar (1:1) (1 cement : 1 course sand) and filling joints with white cement of approved quality including cost of all materials, labour, labour cess, T&P etc. required for the work all complete as per direction of the Engineer-in-charge
-
-
-
Ground Floor
640.5
686359
1071.6
First Floor
640.5
693085
1082.1
Second Floor
640.5
700194
1093.2
Supplying, fitting & fixing of Vitrified colour printed series tiles of thickness 8mm to 10mm in dadoes, skirting and risers of steps of size 600mmx 600mm of approved make confirming to IS:13755 laid on 25 mm thick cement mortar (1:1) (1 cement : 1 course sand) jointed with slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost of all materials, labour , labour cess, T&P etc. required for the work all complete as per the direction of the Engineer-in-charge
-
-
-
Ground Floor
101.4
119023
1173.8
First Floor
101.4
120635
1189.7
Second Floor
101.4
122318
1206.3
Supplying, fitting & fixing of Kota Tiles of minimum 16mm thick and above 0.10 sqm of approved make in floors over 25mm thick bed of cement mortar 1:1 jointed with cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respec of approved quality including cost of all materials, labour, labour cess, T&P etc. required for the work all complete as per direction of the Engineer-in-charge
-
-
-
Ground Floor
78.3
70180
896.3
First Floor
78.3
71002
906.8
Second Floor
78.3
71871
917.9
Supplying, fitting & fixing of Kota Tiles of minimum 16mm thick and above 0.10 sqm of approved make in dadoes / skirting laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect of approved quality required for the work all complete as per direction of the Engineer-in-charge
-
-
-
Ground Floor
9.7
9686
998.6
First Floor
9.7
9839
1014.4
Second Floor
9.7
10001
1031.1
Providing & laying kota stone flooring using kota stone slab of approved quality, colour and size above 0.4 Sqm as per IS 14223 in Stair Treads, Risers, etc over an under layer of 20 mm thick cement mortar (1:4) (1 cement: 4 coarse sand) confirming to IS-1443 including forming and nosing ,cutting to size, laying and joining with white cement slurry and colouring pigment to match the shade including cost of all labour, materials, taxes, royalties, loading and unloading, conveyance, sundries, watering and curing, etc. complete as per the direction of the Engineer-in-Charge.
-
-
-
Ground Floor
23.4
21972
939
First Floor
23.4
22269
951.7
Second Floor
23.4
22581
965
Providing, fitting and fixing of Al door with anodized Al. door section of 9202 as vertical member, 9201 as top and 9200 as middle and bottom member with frame section No.9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle no. 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges , etc. complete as per direction of the Engineer-in-charge
-
-
-
Ground Floor
132.25
59750
451.8
First Floor
121.68
54975
451.8
Second Floor
121.68
54975
451.8
Providing and fixing Dressed seasoned sal wood work in frames at any locations including doors, windows, cupboard, clerestory and other frames fixing in position including cost of hinges, M.S flat (30mm x 6mm) hold fasts lugs or dash fasteners of required dia and length as per drawing/ specifications at all floors and all heights including cost of all materials, labour, labour cess, T&P etc required for the work all complete as per the direction of the Engineer- in- Charge.
-
-
-
Ground Floor
0.8
63379
79224
First Floor
0.7
55456
79224
Second Floor
0.7
55456
79224
Providing, fitting and fixing of 30mm thick flush door shutters conforming to IS: 2002 (Part-I) decorative type, core of block board construction wit frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both face of shutters inclusive of 4 nos of stainless steel butt hinges (100mm x 60mm x 2.5mm ) 40mm stainless steel screws. Cylinderical Lock (Godrej- 9843), tower bolt SS 10x300mm (Bathroom) (Godrej 3264), PVC Door Buffer with SS Screw, teak wood lipping around the edges and paste with 1.5mm thick laminate on both side of the flush door etc. including the cost of all materials, hardware fittings, cost of all labour, conveyance, loading, unloading T&P etc complete as per the direction of the Engineer- in - charge.
-
-
-
Ground floor
40.87
190282
4655.8
First Floor
34.82
162114
4655.8
Second floor
34.82
162114
4655.8
Supplying & fitting fixing of Un- plasticised Poly Vinyl Chloride (UPVC) (FENESTA/NCL VEKA LTD) Three Track -Three Panel sliding Window -60 series dully manufactured using UPVC reinforced profiles of 108mmx45mmx2.5mm for outer frames & Window sash of 39mmx58mmx2.5mm capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefabricated and welded through fusion welding the window sash shall be fixed with 6mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant & the system is to be installed using Reinforced Large Coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing /deglazing at site etc. including cost and conveyance of all materials, accessories,labour charges, materials and product and product conforming to ASTM D 638-14 EN-477-95 and Other applicable codes and standards as per direction of the Engineer-in-charge
-
-
-
Ground Floor
60.77
363647
5984
First Floor
75.3
450595
5984
SecondFloor
75.3
450595
5984
Supplying & fitting fixing of Un- plasticised Poly Vinyl Chloride (UPVC) (FENESTA/NCL VEKA LTD) Ventilator/Top Hung -60 series dully manufactured using UPVC reinforced profiles of 60mmx55mmx2.5mm for outer frames ,75mmx60mmx2.25mm for Casement Window sash profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefabricated and welded through fusion welding the window sash shall be fixed with 6mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant acessories like clipping locking system made of aluminium 1 No. per set of sashes & the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing /deglazing at site etc. including cost and conveyance of all materials, accessories,labour charges, materials and product and product conforming to ASTM D 638-14 EN-477-95 and Other applicable codes and standards as per direction of the Engineer-in-charge
-
-
-
Ground Floor
5.8
41267
7115
First Floor
5.8
41267
7115
SecondFloor
5.8
41267
7115
Supplying, fitting and fixing hand railing of Stainless steel of 304 grade using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with all cost, conveyance, taxes of all materials, cost of all labour, T&P etc. required for the complete in all respect as per direction of the Engineer-in-charge.
-
-
-
Ground Floor
192
55756
290.4
First Floor
214.6
62319
290.4
Second Floor
214.6
62319
290.4
Wall painting two coats with plastic emulsion paint of approved make including sand papering, cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.
-
-
-
Ground floor
2853.1
639665
224.2
First Floor
2888.7
659201
228.2
Second Floor
2888.7
673355
233.1
Terrace floor
641.56
152755
238.1
Wall Painting two coats with any approved colour of weather seal coat of approved shade and quality over a coat of water bound wall cement primer including sand papering, polishing the surface, all cost, conveyances of all materials and cost of all labour, labour cess with T&P etc, complete as per specification & direction of the Engineer-in-charge.
-
-
-
Ground floor
953.1
140296
147.2
First Floor
1281.8
195730
152.7
Second Floor
1281.8
203037
158.4
Terrace Floor
681.24
111995
164.4
Painting two coats of approved Synthetic enamel paints of approved colour, shade over new/ old Iron work and wood work over a coat of primer including all cost of primer and paint, sand papering, polishing the surface, all cost, conveyances of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.
-
-
-
Ground floor
37.8
7972
210.9
First Floor
37.8
8172
216.2
Second Floor
37.8
8380
221.7
2.5 cm thick Grading concrete (1:2:2) on roof slab with 6.7mm & down grades size hard granite crusher broken chips on new work including all cost, conveyances of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.
-
-
-
Terrace at Second Floor level
126.3
48815
386.5
Terrace Floor
687
293005
426.5
Providing and laying plain cement concrete of proportion (1:2:4) using 4 cm. size hard crusher broken granite stone aggregate and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including all cost, conveyance, royalties and cost of all labours,labour cess, T&P etc complete as per specification & direction of the Engineer-in-charge.
-
-
-
Terrace
3.74
30458
8143.9
INTERNAL PH
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor PVC pipes conforming to ASTM-D-1785/89 of the following nominal bore, tube fittings and clamps including making the wall good, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge
-
-
-
20mm dia PVC ASTM pipe (sch-80)
-
-
-
Ground Floor
68
10859
159.7
First Floor
58
9633
166.1
Second Floor
58
10016
172.7
25mm dia PVC ASTM pipe (sch-80)
-
-
-
Ground Floor (Water supply)
115
25944
225.6
32mm dia PVC ASTM Pipe(Sch 80) (Water supply)(First Floor)
70
16247
232.1
40mm dia PVC ASTM Pipe(Sch 80)(Rooftop)
65
15509
238.6
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
15mm dia CP angle stop cock (Essco/jaquar Make)
52
44787
861.3
15 mm dia CP Bib cock (Essco/jaquar Make)
10
8881
888.1
15mm dia two way bib cock(Essco/jaquar Make)
10
12550
1255
15mm dia CP long body bib cock (Essco/jaquar Make)
23
33393
1451.9
20mm dia CP Concealed stop cock(Essco/jaquar Make)
20
22640
1132
25mm dia brass full way valve (Shakti make)
8
9586
1198.3
32mm dia brass full way valve (Shakti make)
6
10523
1753.9
25mm dia CP Health Faucet (Essco/jaquar Make)
10
16487
1648.7
15mm CP Extension piece
95
4997
52.6
125mm CP grating
20
1572
78.6
15mm size C.P. flange
57
4411
77.4
Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width Fly ash Bricks in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge
-
-
-
2000 liters capacity PVC water storage tank (Roof of F.F)(Sintex-4 Layer)
8
353235
44154.4
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.
-
-
-
Ground Floor
18
909
50.5
First Floor
16
822
51.4
Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge.
-
-
-
Ground Floor
18
3045
169.2
First Floor
16
2720
170
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
-
-
-
Ground Floor
60
11694
194.9
First Floor
50
10015
200.3
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
170
77996
458.8
75mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
50
9705
194.1
110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)
6
2983
497.3
110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
18
5284
293.6
110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
22
5104
232
110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
12
698
58.2
75mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
10
482
48.2
110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
18
5808
322.7
110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
44
7044
160.1
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
580mm size Orissa pan (Hindware/Parrywaremake)
13
47543
3657.2
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
-
-
-
European water closet with 'S' trap plain(Hindware/Parryware/Neycer make)
5
15482
3096.5
Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
-
-
-
10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
18
40435
2246.4
Differently Abled series (1no)
-
-
-
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
-
-
-
550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make)
1
3841
3841.2
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
-
-
-
600mmx450mm size B.E mirror (swivelled type)
1
724
724.5
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge.SINGLE PIECE-WATER COLSET P TRAP - LYS-WHT-0204P
1
12008
12008.7
CP soap Dish holder (Jaquar make) CAN - MCH - 1131N
1
664
664.4
CP towel ring (Jaquar) CAN - ANQ - 1121
1
994
994.2
Grab bar (Jaquar make) WAC - WHT - BAI 090
2
12599
6299.7
450MM long Grab bar (Jquar make)AHS - CHR - 1507
2
2706
1353.4
Supplying all materials, labour, T&P and fixing Flat back lipped Urinal of size 630mmx180mm with integral longitudinal flushing pipe including cutting the door & mending good the damages embedding the plate in 25mm. Cement mortar(1:8) laid over 150mm. Cement concrete(1:5:10) using 40mm hard granite metal including 6mm. Thick white cement finishing at the top of the urinal foot plate etc.all complete as per specification and direction of the Engineer in charge.
8
46429
5803.7
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
-
-
-
550mmx400mm W.H.basin (Hindware/Parryware/Neycer) make with pedestal
24
144360
6015
Supplying all materials, labour, T&P for fitting & fixing plain Kitchen sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink
2
11539
5769.9
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
25mmx600mm long CP towel rail
36
30974
860.4
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.
-
-
-
600mmx125mm plate glass shelf with CP/NP guard rails.
36
22852
634.8
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
-
-
-
600mmx450mm size B.E mirror (swivelled type)
24
17388
724.5
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
-
-
-
CP soap holder
36
9032
250.9
Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.
-
-
-
½” x 5” CP Shower (Plaza Deluxe Make)
18
9752
541.8
Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
10
2013
201.3
Supplying all materials, labour, T&P and cutting of R.C.C roof or cornice for taking H.C.I pipes and making good the damages etc all complete as per P.H.Specification and direction of the Engineer in charge.
10
1192
119.2
Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site.
-
-
-
Ground Floor
6.15
2683
436.3
Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 40mm size crusher broken hard black granite metal including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
-
-
-
Ground Floor
6.15
34809
5660
First Floor
5.22
30840
5908.1
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
-
-
-
Ground Floor
4.1
29755
7257.5
First Floor
3.48
26397
7585.5
Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed series to be pre-approved by the Engineer-in-charge )
-
-
-
Ceramic tile 40cmx40cm
-
-
-
Ground Floor
41.02
51266
1249.8
First Floor
34.77
43820
1260.3
Second Floor
34
43227
1271.4
Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge )
-
-
-
Glazed tile 25cmx40cm
-
-
-
Ground Floor
241.06
278906
1157
F.F AND S.FTotal:-
320.84
376024
1172
Supplying all materials labor T&P and fitting & fixing 40mm to 50mm thick marble partition tile including cutting grooves and mending good the damages with cement plaster (1:3) jointed with neat cement slury mixed with pigments to match the shades of the tile including rubbing and polishing all complete as per specification and direction of the Engineer in charge.
3.24
2742
846.6
Supplying all materials,labour, T & P and providing brick work in super structure with KB bricks having crushing strength not less than 75 kg/cm² with dimensional tolerence ±8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty ,taxes etc all complete as per specification and direction of Engineer in charge.
3.84
21217
5525.5
Factory made single leaf rigid FRP(alternately called GRP) sanwhch composite door shutter of 32mm thick laminated ith two GRP skins with wood grain finish fabricated using UV-stabilised Isothealica Gelcoat and one layer of 450 gsm E-glass chopped starand mat (CSM) impregnated with orthopthalic palyester resin. The thikness of the skins shall not be less that 1.50mm expanded polyestyrone(EPS) stuctural foam panel of 29 mm thickness and a density of 20Kg/cu.mtr shall be used as core material .Wooden reinforcements made of seasoned sal wood reinforements for fitting the metal fittings such as tower bolts ,aldrops,handles etc. shall be provided .A Strictira; adehsive compatible with(EPS) foam shall be used for bending the core material,the sal wood reiforcements and the skins.The materials and process for manufacturing the door shutters shall conform to RC-TIFAC composites Design centre's standars and specifications and the door shutters tested in conformation to IS:40250-1998.The finish of door shutter will be plain colour white/Lvory/beige/Light grey/Mahogany/Teak wood of any other colour using high quality pigments .Three heavy whight mild steel butt hinges typpe-I(ISI-marked) size 100 mm are to be fitted on one side of shutter.
59.85
191520
3200
Factory made FRP (alternately called GRP) door frame of sixe75mmX100 mm fabricated using E-Glass chopped strand Mat(CSM) U.V stabilised inopthalic Gelcoat and impregnated with inopthalic resin.The thickness of the GRP sikns shall no be less that 2.00 mm .The door frame consist of foru segments which are provided with plug-in-socket arrangement in-site in the ,ould .The segments are plugged in and are joined together by means of screw . The GRP frame shall be provided with wooedn rainforcement of six locations for high screw holding capacity for fixing metallic hold fast and shall be consolidated by filling with medium destity foam/Plaster of paris with fibre reinforcement,Six numbers of 260mm X 25mm X 5 mm size 'S' shaped M.S flat hold fast shall be provided with the frame .The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design centre's stanards and specifications.The finish of door rrame will be plain colour white/Lvory/Beige/Light grey Golden brown Mahogany/Teak wood sand stone/Champagne /Pastel blue or any other colour using high quality pigments cimplete in all respect as per specification and direction of the Engineer in Charge.
108.9
62334
572.4
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 80 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 80 liter's along with 2 noa of faucets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge
-
-
-
Aqua guard pure Chill 80 PSS UV
3
260937
86979
External PH
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge
-
-
-
110mm dia PVC Pipe Type B
37.2
46157
1240.8
Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge
8
12853
1606.7
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge
-
-
-
Inside size 760mmx760mmx460mm with 18” dia RCC MH cover
8
79088
9886
Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification.
-
-
-
Man hole chamber size 910mmx910mmx910mm (18" RCC Cover )
6
114913
19152.2
Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
4
90478
22619.7
2 nos 50 Users septic tank (Size-5.00m X 2.00m X 2.10m)
-
-
-
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.
58.4
13062
223.67
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft.
38.94
9349
240.1
Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.
66
8190
124.1
Supplying all labor T&P &Providing C.C. (1:2:4) with 12mm size broken hard granite chips including watering curing & lead of all materials to site etc. all complete.
8.76
63575
7257.5
Providing C.C. (1:1½:3) with 12mm size hard granite chips of RCC work including hoisting and laying and curing with lead of all materials to site.
3.06
24888
8133.5
Supplying all materials, T&P and providing MS reinforcement for RCC work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauges.
3.1
28831
9300.6
Rigid & smooth centering & sheltering for RCC work including falls work & dismantling than after casting including cost of materials in ground floor.
-
-
-
RCC floor, roof slab chhaja up to 4.430 m height
15.34
10308
672
Supplying all materials labour T&P and providing 1st class KB brick work in CM (1:4) in foundation and plinth including watering and curing and lead of materials to site.
31.68
175047
5525.5
Supplying all materials labour T&P and providing 12mm thick C.P (1:4) including watering curing and conveyance of all materials to site.
69.52
11804
169.8
Supplying all materials labour T&P and providing 12mm thick C.P (1:6) including watering curing and conveyance of all materials to site.(out side)
113.64
17546
154.4
Supplying all materials labour T&P and providing cement punning including watering curing and conveyance of all materials to site. Same as plaster
70
2506
35.8
Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification.
20
5608
280.4
Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge.
8
3296
412
Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge.
11.68
5095
436.3
Construction of 2 No production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories
-
-
-
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
-
-
-
Drilling of 200mm dia bore
-
-
-
00 mtr to 30mtr.
60
45328
755.48
30 mtr to 45mtr.
30
25088
836.28
Drilling of 150mm dia bore
-
-
-
45 mtr to 220mtr
350
194071
554.49
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
-
-
-
Lowering of 200mm dia P.V.C casing pipes
-
-
-
00 mtr to 30 mtrs
60
8292
138.2
30 mtr to 45mtr
30
4146
138.2
Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.
-
-
-
200mm dia PVC (sch-80) pipe
90
147042
1633.8
Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)
2
2018
1009
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
-
-
-
By DTH Rig
2
9989
4994.8
Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation:
-
-
-
Rocky terrain with boulder formation for 300m depth
2
2244
1122.11
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make)
-
-
-
1 H.P. Single phase 3 stage Vertical / Horizontal submersible pump set at head range of 20 to 35 mtr with discharge capacity 145 to 110 L.P.M With outlet dia 25mm
3
50211
16737.2
DOL Control panel
3
11416
3805.5
40mm dia steel short piece
2
304
152.3
Well cap
2
304
152.3
50mm size CI bracket
2
182
91.3
2.5 sqmm flat cable
340
43554
128.1
20mm dia rigid UPVC pipes
340
2346
6.9
Steel rope with cover
130
3471
26.7
Labour charges for lowering including transportation
3
6000
2000
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge
-
-
-
32mm HDPE pipes (Finolex/Supreme make)
166
16566
99.8
14,000 ltr capacity R.C.C. Under ground sump of in side size (2.80m x 2.80m x 2.0m-1 No.
-
-
-
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.
16.93
3786
223.67
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft.
5.64
1354
240.1
Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.
3.08
382
124.26
Supplying all materials labour T&P filling sand in foundation and plinth with well watered and rammed etc. all complate. As per direction of ELC.
1.69
737
436.3
Rigid & smooth centering & sheltering for RCC work including falls work & dismantling than after casting including cost of materials in ground floor.
-
-
-
RCC floor, roof slab chhaja up to 4.430 m height
55.94
37591
672
Supplying all materials, T&P and providing MS reinforcement for RCC work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauges.
4.52
42038
9300.6
Supplying all labor T&P &Providing C.C. (1:2:4) with 12mm size broken hard granite chips including watering curing & lead of all materials to site etc. all complete.
1.69
12265
7257.5
Providing C.C. (1:1½:3) with 12mm size hard granite chips of RCC work including hoisting and laying and curing with lead of all materials to site.
5.11
41562
8133.5
Supplying all materials labour T&P and providing 12mm thick C.P (1:3) including watering curing and conveyance of all materials to site.
37.58
6914
184
Supplying all materials labour T&P and providing cement punning including watering curing and conveyance of all materials to site.
30.24
1082
35.8
INTERNAL EI WORKS
Recessed / Surface wiring to light point / fan point/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq) (Make of modular box,cover,switch & socket-Legrand Myrios/schneider opale With 10Years Warenty
-
-
-
Group-A
72
40320
560
Group-B
210
167580
798
Group-C
87
96309
1107
Supply and fixing of 6Amp plug with 6Amp switch on existing board. (Modular type)(Make-Great white/ Legrand / Roma/ Havells/ HPL/ Cona)
75
14475
193
Recessed wiring for 5 / 6 amp socket outlet with 2x 6Amp, 250 V clip in type modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection on same switch board as per direction of Engineer-in-charge.(Separate)
60
30720
512
Supplying and fixing of 15/16 Amp Plug point Modular type on modular metal box on surface/Recess with suitable size of Modular cover in front including cutting the wall and making good the same in cases of recessed conduit as required (Make-Great white/ Legrand / Roma/ Havells/ HPL/ Cona)
7
4543
649
Receseed wiring to sub main wiring to following sq mm FRLS PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6mm thick along with the followong sq mm FRLS PVC insulated single core multistrand copper conductor as earth wire as required. (Make of wire Finolex/ Havells /Polycab/ RR )
-
-
-
2 X 1.5 sq.mm +1 X 1.5 sq.mm
780
104520
134
2 X 2.5 sq.mm +1 X 1.5 sq.mm
1100
162800
148
2 X 4 sq.mm +1 X 1.5 sq.mm
110
18150
165
4 X 6 sq.mm + 2 X 2.5 sq.mm
490
206290
421
1x1.5 mm2 for inverter wiring
320
14467
45.21
Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 415V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-HPL/ Havells/ Legrand /L&T/C&S.) 4 WAY (4 + 12) DOUBLE DOOR, HORIZONTAL TYPE
10
21730
2173
Supply and fixing of 5Amp to 32A rating 240 V/415 V "B" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make-HPL/ Havells/ Legrand /L&T/C&S) Single pole (SP)
80
10720
134
32 amp DP MCB
20
18440
922
63 amp FP MCB
10
28510
2851
S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose .
60
5100
85
S/F. Of 1x15Wt. LED Bulb including all connections and accessories.(Bajaj/ Havells/Crompton/Philips make)
45
12600
280
s/f of tube light 18watt /20 watt LED fitting with cover( Make-Havells/ Philips/Crompton as per the direction of side engineer in charge.
140
92120
658
S/F of 1200 mm Sweep BEE star Ceilling fan make of (Usha EXX0 w/o PEARLWH 5 STAR/ Crompton Aura Plus/ Havells Es Neo ) Complete of all Accessories & Connections and down rod etc..
82
217598
2653.64
Supply and fixing of modular type Electronic Type fan regulator (Make-Cona/ Anchor/ Usha/Bajaj)
82
26076
318
S/F of 300mm exhaust fan of Usha/Orient/Havells/Equivalent make
18
38124
2118
Extra for fixing of louvers / shutters complete with frame for exhust fan of all sizes.
18
3222
179
S/F of 450mm,1400 rpm exhaust fan of Usha/Havells/Equivalent make
2
11376
5688
S/F of 18Watt Surface mounted LED downlighter with white powder coated aluminium housing with integrated electronic driver.(Make-Havells/Crompton/Philips/Bajaj))
30
62370
2079
S/F. of 90Wt. LED Street light fittings complete with G.I. bracket. Of Bajaj/Havells/Crompton/Philips make.
9
93996
10444
S/F. of 45Wt. LED Street light fittings complete with G.I. bracket. Of Bajaj/Havells/Crompton/Philips make.
1
4550
4550
S/F of Protico light fitting make of Havells/Polycab/HPL
2
2200
1100
S/Fof Inverter UPS 2 KVA ( make of Microtech/ Sukam/ Luminous )
4
63252
15813
S/F of Inverter Battery 12V 180 AH ( make of Exside/ Luminous/ Amron ) with Battery Box
8
155400
19425
Supply of 3 1/2 core 95 mm2 Al.Armoured cable ISI maked.(Make-Havells/Polycab/Equivalent)
85
47770
562
Supply of 3 1/2 core 35 mm2 Al.Armoured cable ISI maked.(Make-Havells/Polycab/Equivalent)
150
38700
258
Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size excedding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation , sand cushioning, protective covering and refilling the trench etc. as required.
75
10500
140
Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of sizeexceeding 25 sq.mm but not exceeding 120 sq.mm on surface as required.
110
13640
124
Portable Fire Extinguisher System Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made from ISI marked seamless cylinder confirming to IS: 7285, fitted with ISI marked controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket as per direction of Engineer-in-charge. MAKE- FIRESHILED / SAFEPRO /
OMEX
10
89500
8950
Supplying, installation, testing and commissioning of ABC type fire extinguishers of 6 kg capacity including cost of all material & labour etc
complete.MAKE- FIRESHILED / SAFEPRO / OMEX
10
36960
3696
Earthing.
Supply and fixing of Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required
1
2434
2434
Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing as required
45
4230
94
special cu plate earthing-Supply and fixing of Special Coper Plate (600*600*3.15mm with running coper flat 25*5mm long) Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as per the directuion of the site engineer in charge
8
102656
12832
Supplying and laying 25 mm x 5 mm copper strip on surface or in recess for connection etc as required
90
46440
516
Lightning Arrestor
-
-
-
Providing and fixing of Spike type Lightning Arrestor including all connections and accessories as per direction of engineer-in-charge
10
29060
2906
Supplying and laying 25 mm x 5 mm copper strip on surface or in recess for connection etc as required.
90
46440
516
Supply and laying of 70 sq mm single core Copper Armoured cables ISI marked.(Make-Polycab/Havells/KEI/Equivalent)(For Vertical Run)
420
735000
1750
Supply, delivery and laying of 40mm HDPE pipe and cable inside the HDPE pipe as per construction standard specification and draning etc
310
41540
134
S/F of 40x42x12 no 16/18 SWG sheet metal for main 250amp panel board having 250 amp MCCB 36 KA as incommer,250 amp electrolyte cu bus bar, 250 A 4 pole Changeover Switch and 100A, 25 kA FP MCCB-4No.,40A DP MCB-6 No as Outgoing with ampere meter, voltmeter, toggler switch,three nos led indicator and as per the direction of site engineer in charge (make: Siemens / legrand/Schneider)
-
-
-
S/F of250 amp FP mccb 36kA
1
28919
28919
S/F of 100 amp FP mccb 25 kA
4
44016
11004
S/F of 250 A 4 pole Changeover Switch
1
24111
24111
S/F of electrolyte copper flat for busbar 250amp
8.6
7404
861
S/F of 40A DP MCB (C-Series)
6
8772
1462
S/F of ammeter and voltmeter
2
3278
1639
No 16/18 SWG C.R. sheet metal for Main control panel(Indoor) with Febrication
8600
21586
2.51
internal wiring of panel
1730
3235
1.87
Fixing Charge of Panel Board
1
3000
3000
S/F of tvs nut& bolt
4
140
35
S/F of CT coil
1
933
933
S/F of led Indicator lamp for 3 phase suply with toggler switch & fuse
3
150
50
S/F of 36x30x10 no 16/18 SWG sheet metal for main 100 amp panel board having 100 amp MCCB 25 KA as incommer,63 amp FP MCCB 16 KA-4 No., 100 amp electrolyte cu bus bar and 40A DP MCB-4No., as Outgoing with ampere meter, voltmeter, toggler switch,three nos led indicator and as per the direction of site engineer in charge.(make: Siemens / legrand/Schneider
-
-
-
S/F of 100 amp FP mccb 25 kA
3
33012
11004
S/F of 63 amp FP mccb 16 kA
12
92808
7734
S/F of 40 amp DP MCB
12
17544
1462
S/F of electrolyte copper flat for busbar 100 amp
9.6
8265
861
S/F of ammeter and voltmeter
6
9834
1639
No 16/18 SWG C.R. sheet metal for Main control panel(Indoor) with Febrication
16200
40662
2.51
internal wiring of panel
3240
6058
1.87
Fixing Charge of Panel Board
3
4500
1500
S/F of tvs nut& bolt
12
420
35
S/F of CT coil
3
2799
933
S/F of led Indicator lamp for 3 phase suply with toggler switch & fuse
9
450
50
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements