Works Department Tender

Supply, Installation, Testing & Commissioning of Outdoor 1/2.8 inch CMOS 5MP or better, IR PTZ Camera, Effective pixels 2592 x 1944, 5MP, 25 fps; 25x Optical Zoom & 16x Digital Zoom, tripple stream; IR distance: 100 meter; Lens type: Wide 5 to 6mm, Motorized Auto focus zoom lens; Memory card slot: Min 256GB support. Minimum Illumination- Sense up on- Color: 0.005 lux color, B/W: 0 lux IR On, WDR 120dB, Edge Video Analysis Video Motion Detection, Intrusion, Lioter, Counter & Tampering, 3DNR, BLC, HLC, White Balance, EIS, Defog, Mechanical switchable IR filter (Auto ICR), Pan Range 360° continuous, Tilt Range -10° to 90°, Pan/Tilt Modes - Pan: 0.1°/s - 180°/s; Tilt: 0.1°/s - 90°/s, Presets 256, Preset Accuracy 0.25 Deg, 16 Patrol & Tours, Alarm I/O - 2In/2Out, 2-Way Audio- 1/1 Channel In/Out, 256GB Memory card slot, 4 individually configurable privacy masks, 8 Region of Interest, POE+ (802.3 at) or 24VAC 3A for indoor/Outdoor application, IP66/67, IK 10 ; Certifications: ONVIF Profile S/G/T compliant, , CE (EN 50130-4), FCC Part 15, EN 55032, RoHS (EN63000) & NDAA compliant.Make: Honeywell/Axis/Pelco/Bosch/Eq. as per the direction of Eng-in-charge.

Supply & Installation of 32 Channel fully Featured NVR with High decoding capability for Ultra 4K HD viewing up to MP(4K) resolution live view, Preview & Playback, Internal storage supports 4 HDDs expandable up to 40 TB (10TB each). Record bit Rate (320Mbps), 2 HDMI/ VGA simultaneous video, usb ports 3 (2 rear USB3.0; 1 front USB2.0. RS232 1 port (for PC communications and keyboard).) The Quick Wizard and no PoE support . Should have post event recording interval 30s (max 60s ).Should have camera Alarm in ,(smart) motion detection,video loss, camera tamper intrusion,Multi loitering ,crowd detection .Resolution should be upto 3840x2160 and frame rate 30 fps Make-Honeywell/Pelco/Axis /Bosch/Eq. as per the direction of Eng-in-charge.

Supply Installation, testing and commissioning of 6 MTR HIGH HOT DIP GALVANIZED POLE WITH FOUNDATION BOTLS AND PTZ CLAMPING SYSTEM.Make-Bajaj/Valmont/RR Ispat/Transrail/Eq. as per direction of Eng-in-charge.

Supply, installation, testing and commissioning of Surveillance HDD 10 TB. Makes: Seagate/ Toshiba/ WD Purple/Eq. as per the direction of Eng-in-charge.

Supply and laying of Cat6 Outdoor Bouble Jacketing Cable through existing Cable . Make: Digisol / Legrand / Panduit/Eq. as per the direction of Eng-in-charge.

SITC of 1Mtr Patch Cord, Cat6A UTP, Category 6A UTP Patch Cords should be Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. UL Listed Complies with the ANSI/TIA/EIA-568-C.2 Standard. Supports Data Networks Speeds Up to 10/100-Base-T and 1000-Base-TShould be FR-PVC/ LSZH Jacket for Reduced Toxic Gasses Emitted During Combustion RJ45, 8P8C, 2 FORK 50μ’’ Gold Plated Contacts Technical Specifications :Conductor Material : Stranded CopperConductor Diameter :(24AWG)d(Make:Tyco/Legrand/Panduit or equivalent as per the direction of Eng-in-charge.

SITC of Cat6 24 Port Patch Panel with individual replacement Cat6 Keystone jack with Collapsible shutter, Keystone should be UL listed. The Cat-6A transmission performance is in compliance and Exceeds ANSI/TIA/EIA-568-C.2 Standard. Supports 1000-Base-T. Modular Design in loaded or individual port design in UnLoaded for Convenient NetworkTerminations Built in Rear Cable Management for Ease of Installation.,Removable Module Design for repair or maintenance 6x4 Module Specially Designed Jack Configuration PCB: FR4, 1.6mm Thickness. IDC Conductor : 0.5 mm Phosphor Bronze, Tin Plating Contact Compatibility : 22~26 AWG Stranded and Solid Wires 1U Patch Panel to Mount In any Standard Rack. Panel Frame: SPCC Powder coated black. Housing : High Impact Flame Retardant Plastic, UL 94V-0 Rated Easy Port Labeling Identification Provision. Plug Insertion Life : = 750 Cycles with FCC Compliant RJ-45 Plug Plug & Jack Contact : = 100 Grams with FCC Compliant RJ-45 Plug Force Plug Retention Force : = 11 LBF, Durability : 200 Termination Cycles, Operating Temperature : -10 Degree ~ 60 Degree Operating Humidity : 10% ~ 90% RH,Storage Temperature : -40 Degree ~ 68 Degree Standard Verification: ANSI/TIA-568-C.2, ISO/IEC 11801:2002/AMMD.2:2010,YD/T 926.3-2009, ISO/IEC 60603-7 Compliant,RoHS Directive 2002/95/EC/Compliant(Make:Tyco/Legrand/Panduit or equivalent as per the direction of Eng-in-charge.

SITC of control 6F/12F Unitube Armored with water blocking tape.Rodent Proof, UV Protection. Embedded Strength members as 2 rods 1.0 mm.Polyester based yarns below Armor tape for easy ripping Thermoplastic Material Tube. Excellent Water Proof Layer and Moisture Resistance.Excellent Crush Resistance Performance. Light Weight and Compact Structure. The fiber type is a Matched Cladding Single Mode. Low water peak fiber G.652D. Extremely high bandwidth. Optimized to support transmission at 1310 nm,1550 nm. Virtually unlimited Modal Bandwidth at 1310 nm. Should fulfill the requirements of: IEC 60793-1/60794-1.2, ITU-T REC G.652D,Telecordia GR-20 Core. Testing methods are in accordance with the following standard: ITU-T G.652.D & IEC 793-1. UV-curable dual layer acryl ate coating, which ensures excellent micro bending and abrasion resistance. Coating Strip Force (typical): Min.- 1.3 N, Max.- 8.9 N, Stripping force after ageing in water at 70 ± 5 °C for 168 h, Min. 1.0 N, Max. 3.5 N. Attenuation (of cable with fibers): At 1310 nm = 0.36 dB/km,Atten. At 1383nm (OH-Peak) = 0.35dB/km,At 1550 nm = 0.22 dB/km, Cut-off wavelength High limit 1330 nm, Low limit 1180 nm, Cut-off wavelength, High limit 1260 nm, Loss increase at 1550 nm for 100 turns of fiber loosely wound with a 37.5 mm radius: Max. 0.1 dB, Dispersion: Zero dispersion wavelength 1310 nm, Tolerance of zero dispersion Wavelength -10/+12 nm, Zero-dispersion slope: 1295/=λo/=1300, Max. ≤0.092 at λo, Chromatic dispersion coefficient: In 1285 nm - 1330 nm, interval:Max. 3.5ps/km • nm, In 1270 nm - 1340 nm interval, Max.6 ps/km • nm, At 1550 nm , Max. 18 ps/km • nm, Polarisation Mode Dispersion (PMD): Max. =0.2 ps/km, Inhomogeneity of OTDR trace for any two 1000 meter fiber lengths, Max. 0.1 dB/km, Proof test level 1 % (Make:Tyco/Legrand/Panduit or equivalent as per direction of Eng-in-charge

Supply installation testing and commissioning of 24 Port Rack Mount Draw Type LIU loaded with SM SC Adaptors and Pigtails including core splicing and connnectrisation. Make: Tyco / Legrand / Panduit/Eq. as per the direction of Eng-in-charge.

SITC of Min.6 Port Rack Mount Draw type LIU loaded with SM SC Pigtail and Coupler including splicing Configuration Available in Standard 19” 6/12/24 Ports Adapter Interface flexibility by choosing different adapter plates.Consist of Top Cover and Bottom Panel, Easy to Assemble and Dissemble,Three Types of Input Holes, Cable Entry Through Water Proof Cable Clamp, Splice Max 24 Fibers at Most with 1 Tray, Patch Cord with Bend Radius Guides Minimize Macro Bending, Install 6 Cable Management Rings Inside to Ensure Flexibility, Comprehensive Accessory Kits for Cable Entry and Fiber Management, Dimensions (mm) : 482.6mm X 240mm X44mm, Body Material: SPCC Black 1.5 mm, Accessories: Fiber protection sleeves according to the quantity of fiber, 6 cable ties. 6 magic stick strips. 2 cable saddles. (Make:Tyco/Legrand/Panduit or equivalent as per the direction of Eng-in-charge.)

Supply installation testing and commissioning of Fiber Optic Single Mode OS2 SC-LC, Duplex Patch Cords, 2mtr length. PMake: Tyco / Legrand / Panduit/Eq. as per the direction of Eng-in-charge.

Supply and Installation of 1000BASE-LX/LH SFP transceiver module,SMF, 1310nm, 9/125 um Single mode Fiber Type up to 20 KM. Makes: Cisco/ HP/ Digisol/Eq. as per the direction of Eng-in-charge..

Supply installation testing and commissioning of 24 Port Gigabite Fiber Ethernet Access L3 Switch with 16 100/1000Base XSFP+8 Giga Ethernet Combo(RJ45/SFP)+4 10Gigabite SFP+ Uplink Ports. All hardware should supplied with necessary mounting brackets and IN power cord with 3 years warranty. Makes: Cisco/ HP/ Digisol/Eq. as per the direction of Eng-in-charge..

Supply installation testing and commissioning of 24x 10/100/1000 Ethernet L2 Fully Managed Switch with 370W PoE budget, 4x 1G SFP uplinks. Switch should support 802.1Q VLAN, MSTP, L2 & L3 . All hardware should supplied with necessary mounting brackets and IN power cord with 3 years warranty. Makes: Cisco/ HP/ Digisol/Eq. as per the direction of Eng-in-charge..

Supply installation testing and commissioning of 8x 10/100/1000 Ethernet L2 Fully Managed Switch with 140W PoE budget, 4x 1G Combo (1G SFP/1G TX Port) uplinks. All hardware should supplied with necessary mounting brackets and IN power cord with 3 years’ warranty. Makes: Cisco/ HP/ Digisol/Eq. as per the direction of Eng-in-charge..

Supply installation testing and commissioning of 24U 600/650D UL Listed Floor mount Rack with Front glass door with Cam lock, Rear mesh door with Cam lock and 3inch Castor Wheel included with 1 no 6/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Length, 4nos 1U Metal Cable manager with Plastic cable loops, 2nos CFM FAN set, 1no Monitor Tray - Ventilation - 495W - 375D and H/W screw920sets). Makes: Valrack/ Rittal/ APW/Eq. as per the direction of Eng-in-charge.

Supply and Installation of 9U/500D Wall Mount Rack with Accessories: The rack size should be 600W x 500D, Front frame integrated with top, bottom, front and two side panels for better rigidity and strength, Front Glass Door with Lock loaded, Compliance with standards shall be UL 2416., DIN 41494, IEC EN 60529, IEC EN 62262 , IEC EN 60068-2-11 , ISO 9001:2008 including Power Distribution Unit (06/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Lengt), 1 cooling Fan(230V AC - 90 CFM, dB 42), 2nos 1U Metal Cable manager with Plastic cable loops and H/W screw. Makes: Valrack/ Rittal/ APW/Eq. as per the direction of Eng-in-charge.

Supply installation testing and commissioning of 55" 4K UHD(3840 X 2160) resolution Android LED display with built in 2.4 Ghz Wifi, 1.5 Ghz Built in Quad core processor, 2 GB DDR3 RAM, 8 GB Memory, Wifi Type support 2.4G Nwtwork, Mali G52MC1 GPU, with HDR 10, Dolby Audio, Built in Wifi and Cromecast, HDMI CEC, HDMI ARC, Built-in Bluetooth, 20W built in speakers, HDMI 2.0 X 3, AV X 1, USB X 2, RJ45 X 1, Headphone Out x 1, SPDIF Out x 1, 24/7 operational Makes: LG/ Samsung/ Panasonic/Eq. as per the direction of Eng-in-charge.

Supply installation testing and commissioning of HDMI Cable with 4K Supported, 15Mtr length.Make-Deltn/Simon/Honeywell/Eq. as per the direction of Eng-in-charge.

Supply and laying of 20 mm dia ISI marked PVC conduit (1.6 mm thick)

Supply and laying of 25 mm dia ISI marked PVC conduit (1.6 mm thick)

Supply and fixing of 20 mm M.S. clamps U clamps 2 1/2 size

Supply and fixing of 25 mm M.S. clamps U clamps 2 1/2 size

Supply and installation of 1 KVA Line Interactive UPS. Makes: Vertive/Riello/APC/equi. As per Engineer in charge)

Supply installation testing commissioning of 6 KVA UPS with SMF back-Up batteries, suitable for 60 minutes’ configuration with: - 415V, 3ph input & single phase output ON-LINE UPS system backup protection for 60 minutes and all standard accessories as required. The Inverter will have in built protection for ground fault, DC reverse polarity, DC over voltage and current limitation, AC short circuit, AC over Voltage and current limitation. The UPS technology should consist of high double-conversion efficiency IGBT Based rectifier on line type UPS. Makes: Vertive/Riello/APC/equi. UPS & Battery-Exide/Amaron/equi. as per engineer in charge)

Configuration of entire system and other electcal works