Works Department Tender

Providing and fixing Single headed hydrant having outlet of 63 mm dia (2.1/2”) N.B. hydrant (IS:5290) landing valve in Stainless Steel Morris Pattern instanteous coupling type TAC / LFA approved & ISI certified heavy type hydraulically tested to 1.5 times working pressure with necessary nuts, bolts etc.Make-Newage/Safex/Omex. 63 mm Single headed Hydrant with coupling

Providing & fixing 63mm dia RRL hose pipe as per IS 636 TYPE A TAC/ LFA approved of standard length of approved pattern and size including gun metal male and female Coupling duly bound with copper wire etc. complete.Make-Newage/Safex/Omex. 63 mm RRL Hose 15mtr.length. With coupling etc

Providing and fixing TAC approved fire hose cabinet to house fire hydrant & hose, including all other related accerrories fabricated from M.S. sheet (2mm thick) of fully welded construction having front door with locking arrangement, partially glazed with 4 mm thick glass. Cabinet shall be powder coated & painted with post office red colour of size as mentioned in drawing (or as approved by the Architect) to house 15 mtr.x2 nos. hoses. The hose box size is 750 mm x 600 mm x 300 mm Hose Cabinet

Supplying & fixing first aid fire hose reel of thermoplast braided suitably reinforced 20 mm size & 30 m standard length with 5 mm tapering branch nozzle, 25mm dia. Pipe to connect to riser with cut off ball valve attachment. Hose to be swinging type wall mounted drum & recessing into hose cabinet to suit location including fixing with lead anchor fasteners & bolts (Including drum and swivel arrangement) etc complete..Make-Newage/Safex/Omex. Hose reel having 30 mtr. Length with drum etc. complete

Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. Orifice Plate

Providing and fixing Stainless Steel standard branch pipe dia 63 mm inlet with nozzle 20 mm dia outlet conforming to IS : 903, suitable for instantaneous connections to hose coupling etc. as required:.Make-Newage/Safex/Omex. SS Branch Pipe with nozzle

EXTERNAL HYDRANT SYSTEM :- Excavations for pipelines in trench and pit in open areas where disposal or surplus earth is done along the alignment, including trimming and dressing sides, leveling of beds of trenches to correct grades, cutting joint holes, refilling consolidation and dewatering of refilling in 15 cm layers & restoration & unmettalled or unpaved surface to it's original condition. The rate including the cost of necessary timbering dewatering of drain water, diversion of traffic, night signals, fixing caution boars, watching fencing etc. Upto 1.5m depth in all classes of soil

Supplying, installation testing and commissioning of the following ‘C’ class MS Pipe as per IS1239 for underground/over ground pipes with welded / flanged connection with saddles, supports (all with screwed/welded joints) as required including pipe of shorter lengths, tapering connecting pieces, short or long bends, specials like sockets, union nuts, elbows, reducers, plugs, Tees etc. Complete to make the system operative as required by LFA / TAC authorities the pipes will have to be laid and fixed in trenches. The work includes excavation in all types of soils and back filling, dewatering, etc., making holes in brick or RCC walls, slabs/ roofs and making good the damages by bringing to the original condition to the satisfaction of the client and painting two coats of approved shade(Post office red)of enamel paint over a coat of approved primer for overheads pipes and providing and fixing pyp kote (corrosion protection tape) including supply and application of pipe coating and spiral Wrapping for underground piping (wrapping should have overlap of 15 to 20 mm) etc.Make-Tata/Jindal/Sail.Complete as per ASTM standards/IS: 10221 for corrosion protection of pipes for the underground installation.Note: The piping installation has to be put to hydraulic test to1.5 times the working pressure & as per latest applicable codes & standard before applying paint or pipe coating or wrapping etc. complete. 150 mm dia.

80 mm dia.

Providing and fixing hydrant stand posts of 80 mm dia. With flanges and accessories and supply, fixing 63 mm dia SS Single headed Hydrant Valve in the courtyard IS:5290 Including 2 coats of approved enamel paint (red) over a coat of primer, complete with 2.1/2” ‘Morris’ pattern instaneous couplings, etc. complete..Make-Newage/Safex/Omex. Yard Hydrant : 63 mm with coupling

Providing & fixing 63mm dia CP hose pipe as per IS 8423 TYPE A TAC/ LFA approved of 15 mtr. standard length of approved pattern and size including SS male and female Coupling duly bound with copper wire etc. complete.Make-Newage/Safex/Omex. 63 mm CP Hose 15mtr.length. With coupling etc

Providing and fixing TAC approved fire hose cabinet to house fire hydrant & hose, including all other related accerrories fabricated from M.S. sheet (16 Gauge) of fully welded construction having front door with locking arrangement, partially glazed with 4 mm thick glass. Cabinet shall be powder coated & painted with post office red colour of size as mentioned in drawing (or as approved by the Architect) to house 15 mtr.x2 nos. hoses. The hose box size is 750 mm x 600 mm x 300 mm . Hose Cabinet for External yard Hydrant

Supplying and fixing 4 way Fire Brigade service inlet of size 150 mm dia. with 4 No. 63mm (2.1/2") size Stainless Steel male outlets ( Stainless Steel male coupling) including metallic cover of mild steel and glass front, indicator plates,150mm BFV, 150 mm NRV etc. complete.Make-Zoloto/Audco/Advance 4 Way Fire Brigade service inlet

Supply and installation, testing and commissioning of Isolation Sluice valves tested to ISI marked ,PN 1.6 with CI body, bonnet & brass trim parts, & having necessary companion flanges, bolts, nuts, gasket packing and any other spares, including indicator for open and shut position to be installed underground in valve chamber as per fire practice etc complete.Make-Leader/Audco/Zoloto. 150 mm dia

Providing and fixing Stainless Steel standard branch pipe dia 63 mm inlet with nozzle 20 mm dia outlet conforming to IS : 903, suitable for instantaneous connections to hose coupling etc. as required:.Make-Newage/Safex/Omex. SS Branch Pipe with nozzle

Supply, Installation, testing and commissioning of One cum Air Vessel ( Comprise with 100 NBCI sluice valve and 25NB Air release valve and ball valve ) with matching flanges as per direction of engineer in charge.

TERRACE PIPING & ACCESSORIES :- Supply and installation, testing and commissioning of CI Butterfly valves ( heavy ) conforming to BS 5155 ,PN1.6 tested to 1.5 times working pressure with necessary companion flanges, bolts, nuts, gasket packing, support and any other spares, including indicator for open and shut position as per fire practice etc complete..Make-Zoloto/Audco/Leader Size : 150 mm

NRV conforming to IS 5312 (swing type) or to API 594/598 (dual plate check type) with CI body & brass trim part, PN 1.0 having necessary companion flanges, CS hardwares. Gaskets, arrow indicating direction of flow, etc. complete. It shall be ISI Marked and approved make.Make-Zoloto/Audco/Leader Size : 150 mm

100 mm dial Pressure gauge with Syphon tubing & isolation valvePressure Guage: 0-7 kg/sq.cm.Make-H Guru/G Guru.

Supplying, installation testing and commissioning of ‘C’ class MS Pipe as per IS:1239 for overhead pipes with flanges welded and with heavy clamps ,hangers, brackets or pipe supports (all with screwed/welded joints) as required including pipe of shorter lengths, tapering connecting pieces, short or long bends, MS specials like sockets, union nuts, elbows, reducers, plugs, Tees etc. Complete to make the system operative as required by LFA / TAC authorities the pipes will have to be laid and fixed in trenches on walls, ceilings, into brick walls or RCC with lead anchor fasteners. The work shall be to the satisfaction of the Architect and painting two coats of approved shade(Post office red)of enamel paint over a coat of approved primer for overhead pipes .Make-Tata/Jindal/Sail. Size : 150 mm

SPRINKLER SYSTEM :- Supply,Providing, fixing, jointing and testing in position for sprinkler system following "C" class MS pipes conforming to IS:1239 cut to required lengths including all necessary fittings (All fittings shall confirm to IS:1879 (part 1 to 10) and specials such as bends, tees, unions, Reducers, flanges & plugs etc.fixing at wall / ceiling level supported by clamps, hangers (using anchor fastners) etc, as per specification. Threading, jointing, and making proper connections, cutting hole in wall / floor / slab and making good the same. GI pipe sleeves suitable higher size shall be provided wherever the pipes are crossing the fire rated walls / floors slab and sealing the sleeves with glass wool in between and fire sealent compound at either end all as per Consultant / Employers' requirement. All hangers, clamps, brackets etc. shall be of galvanized iron unless specified otherwise and the supply of the same shall also be included in rates under this head. Make- TATA/JINDAL/SAIL (Note:-The quoted rates of the contractor shall also include the cost of Fire sealant,colouring of pipes as required. Welding of any kind on the galvanised support / hanger shall not be permitted. ) 25 mm dia

32 mm dia

40 mm dia

50 mm dia

65 mm dia

80 mm dia

100 mm dia

Providing & fixing of Butterfly valve conforming to IS-13095, PN 1.6 (Body : Grey Cast Iron, Shaft : SS, Disc : SG Iron (Rilson coated), Liner : HT - EPDM) (upto 150mm dia with hand lever operation & above with gear box operation). Tested to a pressure not less than 15 Kg/Sq.cm. Including rubber gasket, flanges, nuts, bolts, washers & painting complete as required. Make-Zoloto/Audco/Leader 100 mm dia

80 mm dia

65 mm dia

50 mm dia

NRV conforming to IS 5312 (swing type) or to API 594/598 (dual plate check type) with CI body & brass trim part, PN 1.0 having necessary companion flanges, CS hardwares. Gaskets, arrow indicating direction of flow, etc. complete. It shall be ISI Marked and approved make.Make-Zoloto/Audco/Leader Size : 150 mm

Supply,Installation, Testing & Commissioning of sprinklerPendent/upright/sidewall sprinkler.Make-HD/Tyco/Viaking.

Supply,Installation, Testing & Commissioning Flexible sprinkler hose for connecting pendent sprinkler.Make-HD/Tyco/Viaking.

Supplying, installing, testing and commissioning of sight glass unit with required size orifice plate, test vave and complete accessories like tees,elbows flanges etc.as per the tender drawing . Butter fly valve for Drain. Make-Zoloto/Audco/Leader (50 mm)

Drain Pipe of Make- TATA/JINDAL/SAIL 50 mm dia.

Supply & installation of approved make flow switch on sprinkler header on each floor, operating at 24-V with all accessories & hardwares.Make-Honeywell.

SIGNAGES-Supplying and installing of in position the following type of sign boards made out of 3mm thick Flexyle photoluminescent based glow in dark sheeting withluminous properties enclosed in a weather proof UV stabilized film with UV screen printing by imported links pasted over 3 mm thick cast acrylic from front side with 6 mm thick acrylic,-20 to +80 degree celcius ,suitable for indoor use,Greenish yellow,Glow visible upto4-6 hours in total darkness.

ANALOGUE ADDRESSABLE FIRE DETECTION AND ALARM SYSTEM :- Supply, installation, testing and commissioning of Main Fire Alarm Control Panel (FACP), the panel shall be addressable analogue fire detection and alarm type with capacity of 4 loops complete with all accessories and battery back up for 48 hours in standby mode and 15 minutes in alarm condition. The panel shall have minimum of 80 character display. Each loop shall support 99 analog / addressable devices and 99 modules minimum as system capacity. The panel shall have TCP / IP facility. The panel shall be as per technical specification. The panel shall be UL/EN/FM approved. The quoted rate shall inclusive of Bacnet/Modbus interface for fire alarm panel with complete accessories.Make-Morley by Honeywell/Notifier/Simens/Edward.

Supply, installation, testing and commissioning of Analogue Addressable multi sensor smoke,heat multi criteria detector with standard base and other accessories as required. The detector shall be UL/EN/FM approved with isolater module inbuilt.Make-Morley by Honeywell/Notifier/Bosch/Edward.

Supplying, installing, testing and commissioning of addressable Manual call point with built in Monitor Module with all accessories complete. The device shall be UL/EN/FM approved..Make-Morley by Honeywell/Notifier/Simens/Edward.

Supplying, installing, testing and commissioning of addressable Hooter at 85 dBA @ 3m for Audible annunciation and 75cd flashing at 1 Hz for visual indication with all accessories etc., complete. The devise shall be UL/EN/FM approved. Make-Morley by Honeywell/Notifier/Simens/Edward.

Supplying, installing, testing and commissioning of 2C x 1.5 sq. mm, Twisted Pair PVC insulated FRLS Armored Cable with Accessories confirming to IS standards and specifications. The quoted rate shall includes of Acrylic Fire stop Sealant in the opening for cables passing through fire compartment walls of RCC floors, masonry walls to provide up to 2 hours fire rating. Make-Polycab/KEI/Finolex/RR Kabel/Havells/Gloster

EMERGENCY EVACUATION SYSTEM/PUBLIC ADDRESS SYSTEM :- Supplying, installing, testing and commissioning of 12 Watt wall mounted speakers with built in line matching transformer, grill flush mounting type in side the utility rooms.Make-Bosch/Bose/Honeywell.

Supplying, installing, testing and commissioning 8 zone voice alarm controller with USB mp3 am/fm player included 8 zone button paging station and microphone.Make-Honeywell/Bose/Bosch.

Supplying, installing, testing and commissioning of Power amplifier of 480 watt.The amplifier should be clean reliable audio for public address amplification.Line input less than 1 volt, unbalanced& line output less than 1 volt unbalanced.Make-Honeywell/Bose/Bosch.

Supplying, installing, testing and commissioning of 12 U Rack for amplifier, Controller & Microphone. Make-Valrack/Legrand/Netrack

Supplying, installing, testing and commissioning of 2 runs of 40 strand and each of 0.2 mm thick, Twisted Pair PVC insulated FRLS unarmored Cable with Accessories confirming to IS standards and specifications. The quoted rate shall includes of Acrylic Fire stop Sealant in the opening for cables passing through fire compartment walls of RCC floors, masonry walls to provide up to 2 hours fire rating.Make-Polycab/KEI/Finolex/RR Kabel/Havells/Gloster

Supplying, installing, testing and commissioning approved make PVC FRLS conduits on ceiling / wall / floor etc. complete with accessories like, Junction boxes, Collars, Bends etc.Make-AKG/Precision/Norpack. 25 mm dia.

Supply and Installation of 1 KVA Online UPS (1 KVA/36 Max+) 1 Phase in 1 1 Phase out with Inbuilt Isolation Transformer, Smart IED Display, Parallel Redundancy having 30 min Back up time. (Make:- Microtek/ APC/Vertiv/Numeric)

Supply and Fixing of UPS Rack Made Up of 50 MM X 5 MM MS angle of Size 4" X 3" X 2"