Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 2,21,800Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_EICCL_103035_13Bid Award Id
ViewTender No
CCE.Ctc.(RandB)44/2023-24Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supplying, filling in foundation and plinth with good quality river sand with watering and ramming including cost, conveyane, cost of all materials and labour etc complete as per direction and specification of Engineer in charge
929.11
764285
822.6
... More
Providing & laying plain Cement concrete (1:3:6) in foundation and plinth using 4cmsize hard crusher broken granite stone metal of approved quality and from approved quarry including lowering, laying concrete watering, curing etc, complete to required levels laid in layers to required thickness including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge
84.06
532465
6334.35
... More
Providing & laying plain Cement concrete (1:2:4) in foundation and plinth using 12mmsize hard crusher broken granite chips of approved quality and from approved quarry including lowering, laying concrete watering, curing etc, complete to required levels laid in layers to required thickness including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge
39.4
306898
7789.3
... More
Fly Ash Bricks masonry (25cmx12cmx8cm) having crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before use in Foundation and Plinth for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc. complete along with testing of strength as per relevant I.S.standard andas per specification & direction of Engineer-in-charge.
104.78
522066
4982.5
... More
Fly Ash Bricks masonry (25cmx12cmx8cm) having crushing strength not less than 75Kg/sqcm in cement mortar (1:6) after immersing the bricks for six hours in water before use in Superstructure and for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc. complete along with testing of strength as per relevant I.S.standard andas per specification & direction of Engineer-in-charge. (Ground floor)
93.48
469344
5020.8
... More
1st floor
93.04
494395
5313.8
... More
2nd floor
93.04
525750
5650.8
... More
3rd floor(Head room)
22.26
134411
6038.25
... More
Fly Ash Bricks masonry (25cmx12cmx8cm) having crushing strength not less than 75Kg/sqcm in cement mortar (1:4) after immersing the bricks for six hours in water before use in Superstructure and for ornamental flower beds, plinth molding and similar such type of works with all necessary projections, cutting, circular molding, corbelling, watering, curing etc. including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc. complete along with testing of strength as per relevant I.S.standard andas per specification & direction of Engineer-in-charge. (Ground floor)
2.4
12585
5243.8
... More
1st floor
2.4
13288
5536.8
... More
2nd floor
2.4
14097
5873.8
... More
RCC work of M-25 with 20mm and down graded size crushed stone aggregates mixed by concrete mixer, laying in layers and compacting by vibrator & all leads and lifts including frame works including cost, conveyance, cost of all labour, T&P, cost of all materials etc. complete as per direction and specification of Engineer-in-charge. Pile Cap
65.37
491700
7521.8
... More
Plinth beam
11.76
98117
8343.3
... More
Column -Ground floor
8.69
133351
15345.4
... More
1st floor
8.69
148372
17073.9
... More
2nd floor
8.69
166357
19143.5
... More
3rd floor(Head room)
1.86
40216
21621.6
... More
Lintel-Ground floor
6.61
96377
14580.6
... More
1st floor
6.61
106791
16156.1
... More
2nd floor
6.61
119258
18042.1
... More
Chajja-Ground floor
19.69
23836
1210.6
... More
1st floor
19.69
26888
1365.6
... More
2nd floor
19.69
30545
1551.3
... More
Shelves-Ground floor
4.46
4520
1013.5
... More
1st floor
4.46
5199
1165.9
... More
2nd floor
4.46
6014
1348.6
... More
Roof beam -Ground floor
10.05
154221
15345.4
... More
1st floor
10.05
171592
17073.9
... More
2nd floor
10.05
192392
19143.5
... More
3rd floor(Head room)
1.01
21837
21621.6
... More
Roof slab -Ground floor
40.79
568567
13938.9
... More
1st floor
40.76
627133
15386
... More
2nd floor
40.76
697729
17118
... More
3rd floor(Head room)
2.3
44139
19191
... More
Staircase -Ground floor
1.41
21565
15294.6
... More
1st floor
1.41
23988
17012.9
... More
2nd floor
1.41
26888
19070.2
... More
Cutting, straightening coiled or bent up M.S. Rod or tor steel using SAIL/RINL/TATA/JINDAL STEEL/ SHYAM STEEL including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge Ground floor
232.88
1978851
8497.3
... More
1st floor
88.17
751508
8523.4
... More
2nd floor
88.17
753924
8550.8
... More
3rd floor
8.04
68979
8579.6
... More
Providing 16mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to inside surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge(Ground floor)
606.82
134016
220.85
... More
1st floor
605.08
136929
226.3
... More
2nd floor
605.08
140257
231.8
... More
3rd floor(Head room)
96.64
22961
237.6
... More
Providing 12 mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to outside surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge(Ground floor)
238.69
36925
154.7
... More
1st floor
218.8
35183
160.8
... More
2nd floor
218.8
36561
167.1
... More
3rd floor(Head room)
144.78
25162
173.8
... More
Providing 6mm thick cement plaster in cement mortar (1:4) in all floors finished smooth to inside ceiling surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge(Ground floor)
210.26
36038
171.4
... More
1st floor
210.26
36921
175.6
... More
2nd floor
210.26
37846
180
... More
3rd floor(Head room)
11.73
2164
184.5
... More
Supplying, fitting and fixing of Vitrified tiles in floors of size (600x600mm) over 20mm thick bed of cement mortar(1:4) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge. (Ground floor)
206.56
227009
1099
... More
1st floor
214.57
238108
1109.7
... More
2nd floor
214.57
240511
1120.9
... More
Supplying, fitting and fixing of Vitrified tiles in dadoes, skirting and risers of steps over 12mm thick bed of cement mortar(1:3) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge. (Ground floor)
27.93
33677
1205.8
... More
1st floor
28.21
34469
1221.9
... More
2nd floor
28.21
34949
1238.9
... More
Supplying, fitting and fixing of 10 mm thick Granite tile flooring(upto 0.10 sqm) over 20mm thick bed of cement mortar(1:4) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge Ground floor
7.63
12982
1701.5
... More
1st floor
14.03
24022
1712.2
... More
2nd floor
14.03
24180
1723.5
... More
Supplying, fitting and fixing of Vitrified industrial floor tiles of premium grade having thickness 8 mm to 10 mm conforming to IS 4457 of size 300mmX300 mm in floors over 20mm thick bed of cement mortar(1:4) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge Ground floor
17.35
17379
1001.7
... More
1st floor
17.35
17565
1012.4
... More
2nd floor
16.7
17094
1023.6
... More
Finishing wall surface with cement based wall putty(water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges, conveyance, taxes of all materials and cost of all labour with TandP etc complete as per specification and direction of Engineer in charge In all floors.Ground floor
789.15
55950
70.9
... More
1st floor
787.13
56988
72.4
... More
2nd floor
787.13
58168
73.9
... More
3rd floor(Head room)
47.89
3613
75.45
... More
Painting two coats with anti-fungal resistance Weather Seal Coat over a coat of primer of approved shade upto any height by means of brush to outside surface of walls after cleaning the surface including watering, curring etc. complete in all floors including cost, conveyance, taxes of all materials, labours sundries T&P required for the work as per specification and direction of Engineer in charge Ground floor
238.69
35588
149.1
... More
1st floor
218.8
33826
154.6
... More
2nd floor
218.8
35117
160.5
... More
3rd floor(Head room)
207.7
34602
166.6
... More
Painting two coats with a coat of approved plastic emulsion paint over a coat of primer including sand papering, polishing the surface, cost, conveyances of materials and cost of all labour TandP etc complete as per specification and direction of Engineer in charge .Ground floor
789.15
123067
155.95
... More
1st floor
787.13
125389
159.3
... More
2nd floor
787.13
128066
162.7
... More
3rd floor(Head room)
47.89
7961
166.25
... More
Painting two coats with approved Synthetic enamel paints of approved colour, shade over a coat of primer in Iron work including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour TandP etc complete as per specification and direction of Engineer in charge. Ground floor
92.42
19759
213.8
... More
1st floor
46.15
10116
219.2
... More
2nd floor
46.15
10554
228.7
... More
3rd floor(Head room)
4.39
1029
234.4
... More
Supplying and fixing W.I clamps 33 cm to 38 cm long of 35mm x 5mm size for doors and windows and ventilators including fixing in cement concrete (1:3:6) with 12 mm to 20 mm hard stone chips or in cemrnt mortar(1:3) including cost of all materials.
212
5955
28.09
... More
Providing and fixing seasoned sal wood work in frames at any locations including doors, windows, cupboard, clerestory and other frames fixing in position including cost of hinges, M.S. flat (30mm x 6mm) hold fasts lugs or dash fasteners of required dia and length as per drawing / specification, at all floors and all heights.
3.41
271142
79514.06
... More
Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR.block board pasted with 1 mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc complete.
85.83
915686
10668.61
... More
Supplying, fitting and fixing of 32 mm Piasal wood panelled shutters(32 mm style with 18 mm panel) of approved quality including cost, conveyances of all materials and labour for fitting, fixing excluding cost of iron fittings etc.complete as per direction of Engineer-in-charge
74.21
390403
5260.79
... More
Supplying in all floors of M.S. gate, MS Grill in doors and windows with top rails, steel windows, critical frames for windows balustrades of stair case and parapet railing made out of M.S.square bar/flat as per approved drawing and design including making holes in walls and RCC structure, wood work etc and making good to the damages to walls with cement concrete(1:2:4) with hard crusher broken granite stone chips of 12mm to 20mm size(20mm size not to exceed 25%) of approved quality with cost of all materials with cost of welding all T&P, sundreis etc complete in all respect as per specification and direction of Engineer in charge(screws and other hardward required materials to be used in the work shall be of approved quality and specification and shall have to be supplied by the contractor at his own cost .
4100.25
233714
57
... More
Labour for fitting & fixing of M.S.windows grills including cost of screws complete.
101.86
1652
16.22
... More
Providing, Fitting & Fixing of Stainless steel of 304 grade in handrailing of 50mm dia of 2mm thick circular pipe with balustrade of size 32mmX32mm X2mm @ 0.90mtr. C/C and stainless square pipes bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance of Materials, Labour, TandP etc required for the complete in all respect and as per specification & direction of Engineer-in-charge
201.03
66319
329.9
... More
Providing 20mm thick cement plaster in cement mortar (1:4) with screened and washed sharp sand for mortar and finished smooth to rough surface of walls in all heights after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties of materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge(Second floor)
335.18
85504
255.1
... More
Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved mak, design, colour and size made by block making with proper compaction laid in required pattern etc complete in all respect conforming to IRC Sp:-63-2018.
895.09
544572
608.4
... More
EI works- Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5Amp, 250V Modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size, MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Make of modular switch -Anchor Roma/Legrand/L & T/ Crabtree)
Group- A L.P- 16
16
9600
600
... More
Group- B L.P- 62 F.P-24
86
73358
853
... More
Group- C L.P-48 F.P-06 E. F.P-18 C.B.P- 06
78
91338
1171
... More
Supply and fixing of 6 Amp plug with 6 Amp switch on existing board (Modular type/cover including connection etc. as required )
60
21240
354
... More
Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6Amp & 16Amp socket outlet and 16Amp Modular switches connection (make-Anchor/ Legrand /Roma/L & T/ Crabtree)
18
12366
687
... More
Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6Amp and 6Amp Modular switches connection (make-Anchor/ Legrand /Roma/L & T/ Crabtree)
24
15048
627
... More
S/F of 25Amp modular stater with 32 Amp TP connector for AC machine power point incul. All connection (Legrand/Havells/HPL)
12
12708
1059
... More
Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required.(Make of wire-Finolex/L&T/Anchor/Havells/V-Guard//HPL)2 X 1.5 sq.mm +1 X 1.5 sq.mm 20 mm dia
404
56560
140
... More
2 X 2.5 sq.mm +1 X 1.5 sq.mm 20 mm dia
673
104315
155
... More
2 X4 sq.mm +1 X 1.5 sq.mm -do-
201
34572
172
... More
2×10 sq.mm +1 X4 sq.mm 25 mm dia
164
43296
264
... More
S/F of Bakelite angle holder/pendant holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose .
42
378
9
... More
Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make- Legrand Havells/ L & T )16 way, DD DB MCB
6
15816
2636
... More
63Amp DP MCB C series
6
8334
1389
... More
25Amp SP MCB C series
24
7584
316
... More
16Amp SP MCB C series
60
18960
316
... More
S/F of electronic step type modular Fan Regulator capacitor control ISI Marked with all connection complete in all respect as per direction of Engineer in charge(Make-Usha/Anchor/Cona)
30
9840
328
... More
S/F of Earthing with medium class 40mm 3Mtr. Long ISI marked GI Earth pipe including accessories such as funnel GI nut, Bolt, washer , hinged cover plate with looking arrangement, 40mm to 20GI rediusor 5nos 20mm dia holes on GI pipe required charpol salt, Excavation of earth brick work in cement mortar complete in all respect as per specification of SR 2011 and as per Direction of Engineer-in -ChageStandard Earthing as per Govt. Spcn.
6
14970
2495
... More
Providing and Fixing 8 SWG (4mm) dia copper wire in recess for connection of earthing as required
164
9512
58
... More
Supply and drawing of 1x1.5mm size PVC insulated single core multistrand copper conductor in existing recessed PVC conduit as required for Inverter wiring
548
26852
49
... More
S/F of 20Watt LED tube light Fitting(4ft) (Make-Havells/ Philips/ Bajaj/Crompton/Panasonic)
66
33000
500
... More
S/F of 9 Watt LED bulb (Make-Havells/ Philips/ Bajaj/Crompton/Panasonic)
42
6552
156
... More
Supply and Fixing of 10 LED B.H fitting with Lamp (make-Havells/Philips/Bajaj/Crompton)
6
11478
1913
... More
Supply and Fixing of 45watt street Light with GI bracket (Make-Havells/Philips/Bajaj/Crompton)
2
13095
6547.5
... More
Supply and Fixing of 18 watt LED Round Surface Ceiling Light (make-Havells/Philips/Bajaj/Crompton)
12
28464
2372
... More
Supply/ Fixing of A.C Ceiling fan 48" size. (Make-Usha-Striker/Orient PSPO Summer cool Breeze/Havels velocity)
30
80400
2680
... More
hook
30
3600
120
... More
Supply of Exhaust fan 12" size (Make - Usha/Almonard/Crompton)
18
28170
1565
... More
Installation, testing and commissioning of exhaust fan up to 450 mm sweep in the existing opening,including making the hole to suit the size of above fan, making good the damaged complete,connection Etc as required.
18
9954
553
... More
Supply and fixing of superior type Ding Dong call bell / buzzer of ISI marked, on 6" X 4" conforming to IS-2268/1994 and bell push of ISI marked , conforming to IS-1293/ 1988 (make-Cona/ Anchor)
6
732
122
... More
S/F of 63 Amp 415 Volt Main switch (Make- Havells/L & T/ Anchor)
6
25602
4267
... More
S/F of 2350VA Inverter(Make-Luminous/Microtech)
6
111414
18569
... More
S/F of Tall Tubular Inverter Battery 12V/150Ah( Make-Microtech/Exide/ Luminous)
12
241536
20128
... More
S/F of Inverter Tolly
6
13200
2200
... More
Supply of 1.5 Ton 3 Star 18K Split type AC machine (Make:-Voltage/ Carrier/Blue Star)
6
301638
50273
... More
Supply and Fixing of 4KVA Voltage Stabilizerfor AC (130V-290V)Make-V-Guard/ Microtech/Autotech)
6
41340
6890
... More
S/F of extra copper cooling pipe with insulation packing and flexible cord for power supply to outdoor unit complete in all respect as per direction of engineer in Charge
24
14952
623
... More
S/F of flexible PVC water drain pipe
30
1950
65
... More
Installation of Split type Air Conditioner machine as per direction of engineer in Charge
6
9000
1500
... More
Supply and Fixing of M.S Stand
6
6000
1000
... More
PH works- Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor c-pvc pipes and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge. 20mm dia 'C' PVC pipe
In Ground Floor
12
2988
249
... More
In First floor
12
3094
257.9
... More
2nd floor
12
3200
266.7
... More
25mm dia 'C' PVC pipe
In Ground Floor
54
18214
337.3
... More
In First floor
18
6231
346.2
... More
2nd floor
12
4260
355
... More
32mm dia 'C' PVC pipe
In First floor
30
15192
506.4
... More
40mm dia 'C' PVC pipe
In 2nd floor
72
50140
696.4
... More
50mm dia 'C' PVC pipe
In 2nd floor
60
64836
1080.6
... More
Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.
250mm thick wall In Ground Floor
8
414
51.8
... More
250mm thick wall In 1st Floor
8
422
52.8
... More
250mm thick wall In 2nd Floor
8
429
53.7
... More
Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge.
6
1030
171.7
... More
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge.
In Ground Floor floor
24
4680
195
... More
In 1st floor
24
4809
200.4
... More
In 2nd floor
24
4956
206.5
... More
Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge.
15mm dia CP two way bib cock(CON-CHR-041KN)
6
7530
1255
... More
15 mm dia CP S.B. Bib cock(CON-CHR-037KN)
6
6496
1082.8
... More
15 mm dia CP L.B. Bib cock(CON-CHR-107KN)
12
17422
1451.9
... More
15mm dia CP 3 in 1 Wall Mixture with Telephonic Shower (FUS-CHR-29119)
6
34845
5807.5
... More
Over Head Shower 100mm dia round (OHS-CHR-1999)
12
25395
2116.3
... More
Shower Arm (SHA-CHR-477)
12
7677
639.8
... More
15mm dia CP angle stop cock(CON-CHR-053KN)
36
31006
861.3
... More
20mm dia CP Con. stop cock (CON-CHR-089KN)
6
7087
1181.2
... More
15mm dia CP flange
72
2901
40.3
... More
15mm Cp extention piece
72
4269
59.3
... More
25mm brass full way valve
10
9296
929.6
... More
32mm brass full way valve
4
5448
1362.2
... More
40mm brass full way valve
4
6909
1727.4
... More
50mm brass full way valve
8
20452
2556.6
... More
125mmdia C.P.grating
24
2052
85.5
... More
15mm dia CP hand shower with reebit cleaning system (ABC chrome plated-Jaquar make-HSH-CHR-85537)
6
12402
2067.1
... More
Acryalic Shelf
12
5852
487.7
... More
25mmx600mm long CP towel rail
12
8502
708.5
... More
CP ring towel rail
18
8562
475.7
... More
CP soap holder
30
5541
184.7
... More
CP Corner Shelf
12
5852
487.7
... More
15mm dia C.P Pillar cock(CON-CHR-021KN)
12
19489
1624.1
... More
15 mm dia CP Sink Cock(CON-357KN)
6
9154
1525.7
... More
Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge.
10 litres capacity pvc low level cistern (Slimline-white)
6
9160
1526.8
... More
Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 3.18m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge
2000litre capacity water storage tanks (3rd Floor)
6
244924
40820.8
... More
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge
110mm dia U-PVC SWR pipes(Supreme/Ashirvad)
138
64018
463.9
... More
110mm U-PVC door Tee
24
9264
386
... More
110mm U-PVC plain Tee
6
1936
322.7
... More
110mm U-PVC door bend
12
3523
293.6
... More
110mm U-PVC plain bend
18
4176
232
... More
110mm dia U-PVC off set
6
2444
407.4
... More
110mm dia U-PVC 'P' trap
12
5967
497.3
... More
110mm dia U-PVC cowl
12
698
58.2
... More
110mm dia U-PVC clamp
72
3081
42.8
... More
50mm dia UPVC class-IV pipes
14.64
1279
87.4
... More
Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI/PVC SWR pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge
250mm to 375mm thick wall
36
7891
219.2
... More
Supplying all materials, labour, T&P and cutting hole in R.C.C roofs,cornice, etc for passing H.C.I Pipes /U.P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge.
12
1995
166.3
... More
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge
580mm size Orissa pan (Parryware/Cera/ Nycer Make)
6
14310
2385
... More
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge
a.Cascade dual flushset (Hindware)No.92099
6
111799
18633.2
... More
Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge
600x450x250 mm stainless steel kitchen sink- (Jayna make)
6
29623
4937.3
... More
Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps(Plaza make) capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge
550mmx400mm size wash hand basin (Parryware/Cera/ Nycer Make).
12
27444
2287
... More
Por.Pedestall
12
12890
1074.2
... More
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge
600mmx450mm size B.E mirror
12
8210
684.2
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
1.89
884
467.8
... More
Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor
1.26
6285
4988.4
... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor
1.33
9068
6818.4
... More
In first floor
1.33
9381
7053.6
... More
In 2nd floor
1.33
10489
7887.2
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
12mm thick CP (1:4) on bw- In gf
63.42
10305
162.5
... More
In First floor
63.42
10496
165.5
... More
In 2nd floor
63.42
11231
177.1
... More
Supplying all materials, labour, T&P and providing brick work with Fly Ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:3) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In first floor
0.15
866
5774.1
... More
In 2nd floor
0.15
927
6181.1
... More
Supplying the waterproofing material Pidifin 2K of Dr.fixit on equivalent water proofing material and appling in two coat over the concrete floor and dado upto 1"-6" in wall including cleaning,applying and mending as per specification including all labour charges as per direction of Engineer-in-charge.
Same as Floor tile area In 1st Floor:
25.11
6227
248
... More
In 2nd floor
25.11
6227
248
... More
Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc. complete as per direction of the Engineer in charge. (Ceramic floor tiles of premium grade Kajaria / Somany/Johnson make of size 30cm x 30cm to be pre-approved by the Engineer in charge)
Ground floor
13.35
12352
925.3
... More
In First floor
13.35
12487
935.4
... More
In 2nd floor
13.35
12639
946.8
... More
Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles etc.complete as per direction of the Engineer in charge. (Ceramic wall tiles of premium grade Somany Daino Light(Glossy) make size 300 x 600 special plain / printed series to be pre-approved by the Engineer in charge)
In ground floor (inside/outside)
63.42
94470
1489.6
... More
In First Floor:
63.42
96563
1522.6
... More
In 2nd Floor:
63.42
98751
1557.1
... More
Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00 mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.
15.3
83236
5440.3
... More
Supplying all materials, labour, T&P and distempering two coats to walls with distemper of approved shade on new work to give an even shade etc all complete as per specification and direction of the Engineer in charge
38.52
2661
69.1
... More
In First Floor:
38.52
2661
69.1
... More
In 2nd Floor:
38.52
2661
69.1
... More
Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:1.5:3) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, fly ash bricks in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI/P-trap gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge
Inside size 250mmx250mm
8
13304
1663.1
... More
Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:1.5:3) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
Inside size 760mmx760mmx460mm
8
80252
10031.6
... More
Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
Inside size 910mmx910mmx910mm
2
38269
19134.6
... More
Supplying all materials, labour, T&P and providing 450mm dia x 50mm thick RCPC man hole cover in cement concrete (1:2:4) using 12mm size h.g chips, placing the cover on the man hole/ inspection chamber and finishing smooth all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge
R.C.P.C. Cover(20"/22" round Man hole cover)
2
2186
1093.1
... More
Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast RCC rings joined loose, gravel backing in the rear of well steining, precast RCC cover slab in cement concrete (1:1.5:3) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge RCC rings soakway pit 1.22m dia x 2.10m deep
3
67560
22520
... More
Brick masonry soakway pit 1.40m dia x 2.00m deep
1
24324
24324.3
... More
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.
110mm dia u-pvc pipe alround concrete
42
53298
1269
... More
160mm dia u-pvc pipe alround concrete
56
114755
2049.2
... More
Construction of 50 users RCC septic tank(I/S size-5.00x1.60x2.40m)
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.
28.8
6572
228.2
... More
Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.
17.28
4148
240.1
... More
Supplying all materials, labour, T&P and providing shoring and shuttering foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per direction of the Engineer in charge.
45.12
11397
252.6
... More
Supplying all materials, labour, T&P and providing dewatering water from pit using 5 HP disel pump set etc.all complete as per specification and direction of the Engineer in charge
12
708
59
... More
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
2.88
1347
467.8
... More
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor
2.78
15595
5609.8
... More
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
R.C.C floor and roof slabs, landings, balconies, projecting sunshades and chajjas up to 4.30m height
8
5415
676.9
... More
R.C.C beams, columns, girder and bressmer etc--In G.F
70.44
71989
1022
... More
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor
9.82
90677
9234
... More
Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.
In ground floor
12.27
92069
7503.6
... More
Supplying all materials, labour, T&P and providing brick work with Fly Ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:3) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In foundation and plinth
0.72
4160
5778.1
... More
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor
0.64
4363
6818.4
... More
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In Ground floor
5.76
956
166.1
... More
Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor (inside)
60.35
10144
168.1
... More
Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor (inside)
45.44
1576
34.7
... More
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
Making MS step iron in 20mm diameter MS steel bars
7
1922
274.6
... More
Supplying all materials, labour, T&P and providing, fitting and fixing U-PVC SWR Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge
160mm U-PVC plain Tee
2
481
240.8
... More
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
15.3
1932
126.3
... More
Sinking of 150mm x 50mm dia tubewell through hand boring (water jet ) method .Supplying all materials, labour, T&P and setting up boring equipments including erection of suitable staging for installation of the required size of tube well, dismantling and removing the same after complection of the work, including transportation of the boring equipments, cleaning and levelling the site, excavation of mud pit, channels etc, levelling of site all complete as per direction of Engineer in charge
1
13454
13454.8
... More
Supplying all labour, T&P and transporting the boring pipes, top casing , grouting pipes, P.V.C pipes and fittings, P.V.C well screens, cement, bentonite and gravels etc to the worksite including loading and unloading etc all complete as per direction of Engineer in charge
1
1320
1320.6
... More
Supplying all labour, T&P and drilling pilot bore not less than 102mm dia, without casing pipes in all kinds of soils and rocks for the following depths excluding supply of necessary boring pipes including supply of necessary cutting equipments, extra sockets (whenever required) etc and withdrawing the boring pipes, washing and keeping the bore clear for logging if required all complete as per direction of Engineer in charge. Drilling pilot bore from 0 to 360 metres
350
380765
1087.9
... More
Supplying all labour, T&P and reaming the pilot bore to the following sizes and depths without casing pipes including withdrawing the boring pipes, washing the bore by means of pipe cylinder etc all complete as per direction of Engineer in charge Reaming 100mm to 150mm dia from 0 to 360 metres
350
65765
187.9
... More
Reaming 150mm to 200mm dia from 0 to 360 metres
350
77966
222.76
... More
Reaming 200mm to 300mm dia from 0-360 mtr
350
86310
246.6
... More
Supplying all labour, T&P and jointing materials and lowering the 300mm dia top casing pipes into the position and removing the same after use all complete as per direction of Engineer in charge from 0 to 360 metres
1
1751
1751
... More
Supplying all labour T&P and grouting with cement slurry for saline sealing in the bore around the 150 mm dia PVC casing pipe etc all complete as per the direction of the Engineer in charge.
1
5255
5255.8
... More
Supplying all labour, T&P and jointing materials and lowering the pvc casing pipes, fittings and well screens in position, including fitting and fixing of centraliser, cutter plug and washing the bore all complete as per direction of Engineer in charge 150mm /110mm dia PVC casing pipe from 0 to 360 metres
350
41125
117.5
... More
Cost of 150mm dia PVC ASTM pipe (sch-80)
50
62570
1251.4
... More
Cost of 110mm dia PVC ASTM pipe (sch-80)
300
276000
920
... More
Cost of 110 mm dia PVC Stainer
18
6300
350
... More
Cost of 110 mm dia C.I. cutter plug
1
350
350
... More
Cost of bentonite powder
30
7728
257.6
... More
Supplying all materials, labour, T&P and packing the bore with washed gravel of river shingles of required size and specification around the well screen and pipe etc all complete as per the direction of the Engineer in charge
6
11379
1896.6
... More
Cost and Conveyance of Gravel
6
3819
636.5
... More
Supplying all materials, labour, T&P and packing the bore with river sand over the gravel pack etc all complete as per the direction of the Engineer in charge
6
927
154.5
... More
Cost and Conveyance of sand
6
2047
341.3
... More
Supplying all labour T&P and grouting with cement slurry for sanitary sealingin the bore around the upper most 3 metres of 150mm dia PVC casing pipe etc all complete as per the direction of the Engineer in charge.
1
1270
1270.7
... More
Cost of Cement
1
490
490.3
... More
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge By Compressor
1
2190
2190.3
... More
Supplying all materials , labour, T&P and providing & fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D & pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction.
40mm dia HDPE pipe
30
4416
147.2
... More
40,mm dia CPVC Pipe
30
20580
686
... More
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submerisble electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trail running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge
1.5 H.P single phase 3 stage head range 20 to 35 metres, discharge 145 to 110 L.P.M with outlet dia of 25mm
1
15200
15200
... More
DOL Control panel
1
3805
3805.5
... More
32mm dia steel short piece
2
304
152.3
... More
Well cap
1
152
152.3
... More
50mm size CI bracket
2
182
91.3
... More
2.50 sqmm flat cable
50
6405
128.1
... More
Steel rope with cover
35
934
26.7
... More
20mm dia rigid UPVC pipes
20
138
6.9
... More
Labour charges for lowering including transportation
1
2000
2000
... More
Supplying all materials, labour, T&P and providing & electrification to submerssible pump sets and service connection including fitting fixing of electric board & Switch etc all complete as per direction of the Engineer in charge.
1
1500
1500
... More
Construction of Production well Protection Chamber
Supplying all materials, labour, T & P and constructing Bore well protection chamber of the inside size 650x650x1000 hight with earthwork in excavation in all kind of soil, cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ash brickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g. chips, 12mm thick cement plaster (1:4) inside and outside, RCC cover slab in (1:1.5:3) using 12 mm size h.g. chips, and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction pof the engineer in charge.
1
11660
11660.3
... More
Supplying all materials, labour, T&P and providing fitting and fixing Dr.Aqua guard Magna UV+HD of size 316x251x462mm with wall hanging facility having storage of 7 ltrs. etc.with internal water supply connection complete as per direction of the Engineer-in-charge.
6
187194
31199
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements