Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 6,31,250Document Cost
₹ 10,000Tender Fee
Refer Documents
Summary
Construction Of Multi Purpose Indoor Stadium At Remuna Nac, Balasore
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_EICCL_102055_1Bid Award Id
ViewTender No
CCEEC-33/2023-24Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Filling the Foundation and Plinth, Sides of Foundation, etc. with excavated materials (excluding rock), in layers not exceeding 0.225 m in depth including cost of watering, ramming, dressing and levelling the top to proper level & gradient, cost of labour, conveyance, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge. (a)Ground Floor
601.59
77665
129.1
Disposal of surplus/ excavated materials by mechanical means within 5km. Lead away from the site including cost of all labour , T&P complete as per the direction of the Engineer-in-charge. (a)Ground Floor
476.49
132844
278.8
Supplying, diluting and preparing chemical emulsion like Imidacloprid 30.5 % SC or other chemicals approved by Central Insecticides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as Pre-Constructional Anti-termite Treatment confirming to IS 6313 (Part-II) and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding the pipes and conduits etc. at the rate of 7.5 liters per sqm on vertical surface and 5.0 liters per sqm on horizontal surfaces, 50% of the emulsion to be filled in the holes made in trenches at 150mm center to center (or as directed by the manufacturer) including the cost of all materials, cost of all labour, conveyance, loading, unloading, T&P, etc. all complete as per the direction of Engineer-in-Charge. ( The payment shall be made on the basis of actual plinth area of the building at ground floor and vertical faces will not be measured for payment). Note- The contractor shall have to furnish Ten (10) years guarantees to maintain the anti-termite treated area / structure free from termite. In addition to the 10 years guarantee furnished as above, the contractor shall have to furnish ten years (after certificate of final completion) Bank Guarantee Bond issued by any Nationalized Bank executed in favour of the client as directed in the prescribed proforma available in the tender document for an amount of 10% (ten percent) of cost of this item of work.
1386.86
144926
104.5
Supplying and Filling with Sand in Foundation and Plinth in layers not exceeding 20 cm in depth, well watered and compact , top surface dressed and levelled to proper level and gradient including cost of all materials , conveyance,taxes, royalties, loading, unloading, cost of all labour, T&P, etc.All compelete as per the dirrection of Engineer-in-charge. (a)Ground Floor
490.61
441156
899.2
Providing and lying Plain Cement Concrete of proportion (1:3:6) in foundation & floor using 40 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge. (a)Beyond 1.5 M to 4.5M Depth
18.18
115279
6341
(b)Ground Floor
178.02
1083785
6088
(C)First Floor
4.2
26632
6341
Providing, lifting, hoisting and laying in position Machine Batched , Machine Mixed and Machine Vibrated Design mix Cement Concrete of M-30 Including the cost of Centering and Shuttering (minimum cement content not less than 407Kg/Cum) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance, loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement.
-
-
-
(A)R.C.C. foundation and footing bases of columns mass concrete pre-cast slab etc. (a)Ground Floor
149.96
1094588
7299.2
(B)R.C.C. Plinth Beam (a)Ground Floor
57.19
464462
8121.4
(C)R.C.C. Beams, columns, grider and bressmer etc. (a)Ground Floor
139.31
2107384
15127.3
(b)First Floor
44.39
748273
16856.8
(C)SecondFloor
29.62
560635
18927.6
(D)R.C.C. Floor and Roof slab, landing, balconies, Projecting sun shades and chajjas up to 4.3Mtr. Height. (a)Ground Floor
96.02
1317682
13723
(b)First Floor
21.28
322851
15171.6
(C)SecondFloor
0.12
2028
16905.3
(E)R.C.C. stairs excluding landing but including railing. (a)Ground Floor
6.84
103114
15075.2
(F)R.C.C. Lintel (a)Ground Floor
4.87
69955
14364.5
(b)First Floor
0.11
1753
15941.4
(C)SecondFloor
0.63
11232
17829.1
(G)R.C.C. walls and fins including attached pillasters. (a)Second Floor
66.42
1089048
16396.4
Providing & fixing TOR Fe-500 HYSD Reinforcement bars (SAIL /TATA /RINL/JINDAL) of required diameter and approved quality for Reinforced Cement Concrete work including straightening, cutting, bending, binding, welding(if approved) , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings (BBS) with provision of standard fan hooks including the cost of all materials, cost of all labour, conveyance, loading, unloading, cost of binding wires of 18 to 20 gauge, T&P, etc, all complete as per the direction of Engineer-in-Charge.
Note: (Linear measurements will be taken & quantity will be calculated on standard weight. Lap length of bars & Weight of binding wire will not be considered for measurement and payment). (a)Ground Floor
623.34
5539934
8887.5
(b)First Floor
114.56
1021142
8913.6
(C)SecondFloor
162.11
1449425
8941
Providing and laying Brick Masonry work in Foundation & Plinth using Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in cement mortar (1:6) affter immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge. (a)Ground Floor
16.92
86425
5107.9
Providing and laying Brick Masonry work in Foundation & Plinth using Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in cement mortar (1:4) affter immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge. (a)Ground Floor
63.83
340660
5337
Providing and laying Brick masonry work in Super Structure using Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in cement mortar (1:4) for Half Brick Masonry Wall with provisions for 2 nos 6mm dia MS bar at each 4th layer after immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge. (a)Ground Floor
35.79
192203
5370.3
(b)First Floor
4.28
24238
5663.3
(C)Second Floor
0.37
2220
6000.3
Providing and laying of Full Brick Masonry work in Super Structure using Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in cement mortar (1:6) affter immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge. (a)Ground Floor
300.97
1547377
5141.3
(b)First Floor
123.36
670375
5434.3
(C)Second Floor
43.48
250931
5771.2
Providing, lifting, hoisting and laying in position machine batched , machine mixed and machine vibrated approved design mix Reinforced Cement Concrete of grade M-20 (minimum cement content not less than 347 Kg./cum) in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality, size and grading obtained from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of all labour, conveyance, royalty, loading, unloading, watering, curing, sundries, hire & running charges of machineries, cost of admixture in recommended proportions ( as per IS 9103 ) to retard/accelerate the setting time of concrete, improve workability without imparting the strength and durability, etc. all complete as per the direction of the Engineer-in-charge.(but excluding the cost of reinforcement, centering and shuttering.) (a)Ground Floor
51.17
333966
6526.6
Providing average 25mm thick grading Concrete in C.C ( 1:2:2 ) using 6mm size crusher broken black hard granite chips using 2% water proofing cement compound (Make: Sika / Fosroc / Equivalent) after scraping and cleaning the roof surface and finishing smooth to proper slope and gradient including cost of all materials, conveyance, sundries,T&P watering and curing by ponding water over terrace slab etc. complete as per the direction of the Engineer-in-charge. (a)First Floor
492.05
198837
404.1
Providing and installing two component acrylic modified cementitious waterproofing coating over roof slab after carrying out pond test on roof slab, filling all defects, saturating the surface, mixing the products and then application in 2.0 mm thickness (1.8 Kg / sqm coverage rate for 1.0 mm thickness) in suitable layers complete in all respect, all materials, tools, plant & labour complete in all respect. Density 1850kg/m³ , Mix ratio (Powder to liquid) 3:1 by weight ,Water penetration Din 1048 1.5 Bar no leakage Potlife @ 25°C 2 hours & @ 40°C 30 minutes,Recoatable: 8-12 hours Elongation 42% (air) & 31% (under water),Tensile strength 20 kg/cm2 ,VOC content (HK prod code P10-17) 0.5 g/L including cost of all materials, conveyance, taxes and sundries,T&P, watering and curing by ponding water over terrace slab etc. complete as per the direction of the Engineer-in-charge. (Make:Fosroc/SIKA/MAPEI/MYK/Asian Paint/Pidilite) (a)First Floor
799.01
371220
464.6
Providing 6 mm thick Cement Plaster in Cement Mortar of (1:4) to Ceilings of Roof Slabs, Stairs, Landings, Chajja, Shelves, Columns, Beams and Lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing , sundries, T&P etc. complete as per direction of the Engineer-in-charge (a)Ground Floor
690.56
120019
173.8
(b)First Floor
182.42
32489
178.1
(C)Second Floor
1.35
246
182.4
Providing 12mm thick cement plaster in cement mortar (1:4) to the surface of half brick masonry wall including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats, bars, etc only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, royalties, cost of all labour, scaffolding, staging, watering before plastering and curing, sundries and T&P, etc. complete as per direction of the Engineer-in-charge. (a)Ground Floor
197.26
33908
171.9
Providing 12mm thick Cement Plaster to the Surface of Brick Masonry Wall in Cement Mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge. (a)Ground Floor
2184.05
347045
158.9
(b)First Floor
500.05
81258
162.5
(C)Second Floor
667.23
110960
166.3
Providing 18mm thick cement plaster on external surfaces of brick surfaces in two coats consisting of under layer 12mm thick in CM 1:6 (1 cement : 6 coarse sand) and top layer of 6mm thick cement plaster 1:4 ( 1 cement : 4 coarse sand) mixed with integral water proofing material of including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, all taxes and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge. (a)Ground Floor
1840.23
561822
305.3
(b)First Floor
720.17
228581
317.4
(C)Second Floor
703.96
232306
330
Providing Cement Punning including racking out joints,brushing out dust & loose mortar , washing the surfaces with water,making grooves,beads & drip coarse to give ornamental finish as per drawings. Ground Floor
468.14
16384
35
Supplying and finishing the plastered surface of wall using Cement Based Wall Putty (Water Based) of approved make and quality and finished smooth and even surface to receive the paint including the cost of all materials, cost of all labour, conveyance, taxes, loading, unloading, scaffolding, T&P, etc, all complete as per the direction of Engineer-in-Charge.
(Make: Birla White/J K Wall Putty) Inside Putty (a)Ground Floor
2229.2
171202
76.8
(b)First Floor
682.47
53437
78.3
(C)Second Floor
668.58
53352
79.8
Supplying and finishing the plastered surface of wall using Cement Based Wall Putty (Water Based) of approved make and quality and finished smooth and even surface to receive the paint including the cost of all materials, cost of all labour, conveyance, taxes, loading, unloading, scaffolding, T&P, etc, all complete as per the direction of Engineer-in-Charge. Outside Putty (a)Ground Floor
838.16
64370
76.8
(b)First Floor
720.17
57109
79.3
(C)Second Floor
703.96
57654
81.9
Providing and applying Two Coats Plastic Emulsion Paint of approved make, quality and shade over a coat of wall primer of approved quality to the internal plastered surfaces including throughly brushing the surface to make free from foreign materials, sand papering, priming including cost of all materials, cost of all labour, conveyance, loading, unloading, scaffolding, staging, watering and curing, T&P etc. complete as per the direction of the Engineer-in-charge.
(Note: Colour & shade to be approved before procurment & use).(Make:Dulux/Nerolac/Berger/Asian Paint) (a)Ground Floor
2202.22
358301
162.7
(b)First Floor
591.26
98208
166.1
(C)Second Floor
224.43
38040
169.5
Providing & Painting two or more coats with Premium Acrylic Smooth Exterior Paint with Silicon Additives of required shade after preparation of surfaces including brushing the suface to make free from foreign materials, sand papering, Priming, etc. including the cost, conveyance, taxes of all materials, cost of all materials, T&P, etc, all complete as per the direction of Engineer-in-Charge. (Note: Colour & shade to be approved before procurment & use)(Make:Dulux/Nerolac/Berger/Asian Paint) (a)Ground Floor
2013.53
300620
149.3
(b)First Floor
811.38
125682
154.9
(C)Second Floor
1148.11
184501
160.7
Providing and painting Two Coats of Synthetic Enamel Paint of approved quality, brand and shade over a coat of red oxide primer to Iron Work including cost, conveyance, royalties, taxes, of all materials, cost of all labour, labour cess, T&P etc. required for the work complete as directed by the Engineer-in-Charge. (Note: Colour & shade to be approved before procurment & use).(Make:Dulux/Nerolac/Berger/Asian Paint) (a)Ground Floor
267.58
41903
156.6
(b)First Floor
7.92
1270
160.4
Providing and Painting of Epoxy paint (Two or more coats) on steel work at all locations prepared and applied as per manufacturer's ecifications including appropriate priming coat(Red Oxide Zinc Chromate) , preparation of surface, etc. complete as per Direction of E.I.C. (Make:Dulux/Nerolac/Berger/Asian Paint) (a)Second Floor
1478
339644
229.8
Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, Galvanised M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each with zinc coating of 120 gms/sqm(both side inclusive)) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete. 66mm Overall thickness Partition with 8mm thick Double Skin Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg/ sq.cm, Bending Strength 100 kg./ sq.cm. (Make:Aerolite/Hilux/Aeroceil)
10.46
15114
1445
Providing and laying of 600 mm x 600 mm Matt Finished Vitrified Floor Tiles confirming to IS : 15622 of approved make, quality and colour without any warpage laid over an under layer of 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.
(Note- Sample of tiles shall be approved before procurement and use.) (Make:Somany/Jhonson/RAK/Kajaria) (a)Ground Floor
324.53
371489
1144.7
Providing and laying of Vitrified Tiles in dado/skirting confirming to IS : 15622 of approved make, quality, colour and size 600mm x 600mm upto required height from floor level fixed over an under layer of 12mm thick bed of cement mortar (1:3) (1 Cement : 3 Coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, taxes, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.
(Note- Sample of tiles shall be approved before procurement and use.) (a)Ground Floor
27.29
34134
1250.8
Providing and laying of 600mm x 600mm Non-Skid Ceramic floor tiles confirming to IS : 15622 of approved make, quality and colour without any warpage laid over 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, taxes, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.
(Note- Sample of tiles shall be approved before procurement and use.)
(Make:Somany/Jhonson/RAK/Kajaria) (a)Ground Floor
78.75
60952
774
Providing and laying of Glazed Ceramic Wall Tiles in dado/skirting confirming to IS : 15622 of approved make, quality, colour and size 600mm x 300mm upto required height from floor level fixed over an under layer of 12mm thick bed of cement mortar (1:3) (1 Cement : 3 Coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, taxes, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.
(Note- Sample of tiles shall be approved before procurement and use.)
(Make:Somany/Jhonson/RAK/Kajaria) (a)Ground Floor
228.21
209405
917.6
Providing & laying granite stone flooring using19-20 mm thick granite stone slab of approved quality, colour and size above 0.4 Sqm as per IS 14223 in Stair Treads and Risers over an under layer of 20 mm thick cement mortar (1:4) (1 cement: 4 coarse sand) confirming to IS-1443 including cutting to size, laying and joining with white cement slurry and colouring pigment to match the shade with typical half nosing and cutting grooves etc including cost of all labour, materials, royalties, loading and unloading, conveyance, sundries, watering and curing, etc. complete as per the direction of the Engineer-in-Charge. (Colour: Tan Brown)
(Note- Sample of granite tiles shall be approved before procurement and use.) (a)Ground Floor
21
64169
3055.7
Providing & laying granite stone flooring in Floors and landing using 19-20 mm thick granite stone slab of approved quality, colour and size above 0.4 Sqm as per IS 14223 laid over an under layer of 20 mm thick cement mortar (1:4) (1 cement: 4 coarse sand) confirming to IS-1443 including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Colour: Tan Brown)
(Note- Sample of granite tiles shall be approved before procurement and use.) (a)Ground Floor
94.12
283517
3012.3
Providing & laying granite stone tiles in dado/skirting using 10mm thick granite stone slab of approved quality, colour and size above 0.4 Sqm as per IS 14223 to proper line, level and slope laid over 12mm thick cement mortar (1: 3) confirming to IS IS-1443 including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. (Colour: Tan Brown)
(Note- Sample of tiles shall be approved before procurement and use.) (a)Ground Floor
7.15
16668
2331.3
Supply and Installation of GRADE-2 Maple/Teak Wooden Flooring System (BWF Certified) EN Tested of Hardwood Maple Size: 20mm thick X 57/83 mm Width Tongue & Groove system over 45mm treated Pinewood Sleeper installed at 9"(23 CM) distance with 19mm thick Rubber Pads sanded ,kiln and dried treated with vapour barrier of 6 mil polythylene laid on VDF Flooring, including cost of all materials, cost of all labour, conveyance, loading, unloading, T&P, etc.Complete as per drawing and the direction of the Engineer-in-charge.(VDF Flooring Paid Separately) (a)In all Floors
581.28
4496840
7736.1
Supplying and installation of 4.5mm thick (BWF Certified) PVC/YONEX Mat Flooring EN/DN Tested (EN 14904: Shock Absorption= 11%, Vertical Deformation or DIN 18032.2:Force Reduction=11%,Standard Deformation) to be glued /taped on top of the Maple wood flooring including line marking. The cost includes all materials, labour, conveyance, taxes, loading, unloading, T&P, etc. Complete as per drawing and the direction of the Engineer-in-charge.
(Mat Colour -Green for Playing area,Blue for Margin/Run-off area) Warranty: 5 Years Methodology of Installation of Maple Wood and PVC Mat Flooring: Step – 1: Lay the Polythene Sheet/ Vapour Barrier on top of the Concrete/ RCC - VDF Floor. Step – 2: Nail the Cushion/ Rubber Pads into the Sleepers. Step – 3: 300/350 mm spacing to be maintained between the Wooden Batten/ Sleepers as per Manufacturer's Specification. or Wooden Batten/ Sleepers to be placed 300/350 mm apart as per Manufacturer's Specification. Step – 4: Top Solid Wood (Maple/ Teak) to be Nailed to the Wooden Batten/ Sleepers. Step – 5: Grinding & Sanding to be done for Unfinished Top Wood (Preferably Factory Prefinished Top Wood to be used) Note: No Polish to be used on Wood (that will make the wood slippery) Step – 6: PVC/ Yonex Mat to be glued/taped on top of the wood Step – 7: Line Marking to be done or Pre done at the factory on the Mat. (a)In all Floors
581.28
2430564
4181.4
Supply of 7.5 mm thick vinyle sports flooring for gymnasium Anti-Viral activity (human coronavirus 229E) – ISO 21702….99.37% (after 2h00) Anti-bacterial activity (ISO 22196) 99% inhabits growth,synthetic sports surface it consists of wear layer not less than 2mm thick, with double fiber glass grid for sound stability on floor. CXPTM HD double density foam backing with D-MAXTM+ ensuring highest possible resistance to indentation, durability and energy return. Surface treated with protecsol, to reduce skin burn and sanosol treatment for fungistatic and bacteriostatic properties.weight not less than 4.6 kg per sqm Sheet width 1.5 mts, joined with seamless hot welding. Floorings laid with adhesive as per manufacturer’s instruction over existing leveled surface including game lines marking. Technical Specifications Shock absorption under EN 14808 standard not less than 25% Ball bounce under EN 12235 standards not less than 90% Abrasion resistance as per EN ISO 5470-1 shall be 350 mg. Friction coefficient as per DIN - 18032 0.4 - 0.6,Sound isolation shall be 18 dB. Anti-bacterial activity 99% inhhibits growthThe cost includes all materials, labour, conveyance, , loading, unloading, T&P, etc. Complete as per drawing and the direction of the Engineer-in-charge.
(Vinyle FLooring Colour ,Code & Line Mark Colour: To be approved by architect)
(Make:Freewill/TS Sports/Wilson Sports) (a)In all Floors
88.24
594446
6736.7
Providing & installation of Safelock 25 mm interlocking rubber tiles of sizes 50*50 cm with 4.6 kgs weight for gymnasium floor. Safelock is a mix of natural rubber & recycled rubber with Elephant skin pattern. It will be UV resistant & the thicker layer of rubber matting protects the floor as well as the user. It also dampens sound & absorbs shocks.including cost of all materials, labour, conveyance, sundries, T&P, complete as per direction of Engineer-in-Charge. ( Make : FREEWILL/ EBACO /TARKETT/ ARMSTRONG ) (a)In all Floors
9
29269
3252.2
Site Development Supplying,Installation of pressed Steel Doors of the specified dimensions and accessories such as hinges,door stopper,tower bolt, door handle ,door closer,dead lock,consedaled flush bolt,Shaft lock,martise lock and vision panel etc. complete as mentioned along with warranty covverage and after sales service etc.inclusive of all costs,taxes,GST,cost of delivery charges ,fixing,fittings and any other invidential charges etc.complete. 8 Nos hinges , 2 Nos Door Stoppers,2 Nos tower bolts & 1 No Martise lock (Door Size 2000mmx2400mm)
2
64664
32332.25
8 Nos hinges , 2 Nos Door Stoppers,2 Nos tower bolts & 1 No Martise lock and vision panel (Door Size 2000mmx2400mm)
2
72714
36357.25
8 Nos hinges , 2 Nos Door Stoppers,2 Nos tower bolts & 1 No Martise lock (Door Size 1500mmx2400mm)
1
31113
31113.25
4 Nos hinges , 1 Nos Door Stoppers,1 Nos tower bolts & 1 No Martise lock (Door Size 1200mmx2400mm)
1
22093
22093.8
4 Nos hinges , 1 Nos Door Stoppers,1 Nos tower bolts & 1 No Martise lock (Door Size 1000mmx2400mm)
9
178972
19885.8
3 Nos hinges , 1 Nos Door Stoppers,1 Nos tower bolts & 1 No Martise lock (Door Size 900mmx2100mm)
2
35208
17604.2
4 Nos hinges , 1 Nos Door Stoppers,1 Nos tower bolts & 1 No Martise lock (Door Size 1200mmx2400mm)
1
24968
24968.8
3 Nos hinges , 1 Nos Door Stoppers,1 No dead lock & 1 No door handle, 1 No Consealed flush bolt (Door Size 750mmx2100mm)
2
32597
16298.95
3 Nos hinges , 1 Nos Door Stoppers,1 No dead lock & 1 No door handle, 1 No Consealed flush bolt (Door Size 1000mmx2100mm)
3
55055
18351.7
3 Nos hinges , 1 Nos Door Stoppers,1 Nos tower bolts & 1 No Martise lock (Door Size 900mmx2100mm)
1
17604
17604.2
8 Nos hinges , 2 Nos Door Stoppers,2 Nos tower bolts & 1 No Martise lock & 2 Nos D handle H-Type, (Door Size 2000mmx2400mm)
1
37507
37507.25
PD-DOOR NYLONSERIES
Thickness of Compact Laminate : 12 mm Colour of HPL Boards: Single Colour PD-Door Size: 900mm (W) x 2100mm (H) a) Aluminum “D-Post” Channel b) Nylon Coat Hook d) Nylon Door Knob e) Nylon Hinges – Gravity to close f) Nylon D-Post End Cap g) Door Stopper Rubber Lining h) S.S.Screws 304 G & P.V.C Wall Plugs Freight Charges As per Actual Total (Basic amount exclusive of all taxes) 25000.00 IGST (Integrated Goods & Service Tax) 18.00% 4500.00 Grand Total Amount 29500.00 P : 0122-3082500, 2308601 F : 0122-2306998 E : mrs@merinoindia.com W : www.merino-besco.com MODLE TYPE - PD-DOOR NYLON SERIES Overall Height Of Cubicle : 2100mm (Including bottom Gap of 10mm) Accessories: Standard – Merino Make Aluminum, Nylon Polyamide 6 accessories) c) Nylon WC Lock set c/w Occupancy Indicator SPECIAL NOTE - Warpage Criteria is 3.0 mm/1000mm for MRS panels as per EN standard- 438.
3.78
58074
15363.75
Providing and fixing of metal Hose Cabinet doors as per IS 3614 part-2:1992 for stability and integrity. Pressed Galvanized steel confirming to IS 277 specification. Door tested & Approved from authorized Govt. testing agency for maximum rating of 2hrs. Door frame shall be Double rebate profile of size 139 x 57 mm made out of 1.20mm minimum thick galvanized steel sheet. Provision should be kept for grouting with cement & sand slurry necessary for fire doors on the clear masonry opening. Door leaf should be 44mm thick fully flush double skin door. Door leaf shall be manufacture from 0.8 mm thick galvanized steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be resin bonded honeycomb core. All doors shall be factory prepared and provided with necessary reinforcement for hinges, locks, Door closer, Vision panel , flush bolt . Painting system will be powder coating finished (Make:4c Fire/Steel Tech/ahlada) (a)Ground Floor
2.16
28343
13121.9
Supplying and installing Aluminium System - Fixed windows made out of ALUPURE/WINPLUS/REKLAD make frame dimension of 39mm x 42mm for with corners mechanical joints. Alupure Aluminium Systems are extruded through Nalco Billets with 6063 T6 Grade. With complete wind load calculation as per IS:875(part-3).Almost unlimited choice of colours deu to finishing techniques such as anodising and powder finishing. The system can accomodate Frosted toughen glass with 4/5/6/8/10/12/14/20 & 22mm. The profile manufacturer should have an authorised fabrication partner for windows assembling and installation. The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets,bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside / Outside of MCCOY /Dowcorning or equivalent. OR Supplying and installing Aluminium System - Openable windows made out of ALUPURE/WINPLUS/REKLAD make frame dimension of 39mm x 62.9mm & Sash dimension of 46mm x 92mm for with corners mechanical joints. Alupure Aluminium Systems are extruded through Nalco Billets with 6063 T6 Grade. With complete wind load calculation as per IS:875(part-3). Almost unlimited choice of colours deu to finishing techniques such as anodising and powder finishing. The system can accomodate Forsted toughen glass with 4/5/6/8/10/12/14/20 & 22mm. The profile manufacturer should have an authorised fabrication partner for windows assembling and installation. The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets,bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent.OR Supplying and installing Aluminium System - Sliding windows made out of ALUPURE/WINPLUS/REKLAD make frame dimension of 88mm x 40 & Sash dimension of 31mm x 61.5mm for with corners mechanical joints. Alupure Aluminium Systems are extruded through Nalco Billets with 6063 T6 Grade. With complete wind load calculation as per IS:875(part-3). Almost unlimited choice of colours deu to finishing techniques such as anodising and powder finishing. The system can accomodate Forsted toughen glass with 4/5/6/8/10/12/14/20 & 22mm. The profile manufacturer should have an authorised fabrication partner for windows assembling and installation. The windows must be installed complete with all kinds of ironmongery (including EPDM gaskets,bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent. (a)Ground Floor
41.36
370622
8960.9
(b)First Floor
2.7
24194
8960.9
(C)SecondFloor
5.4
48388
8960.9
Supplying, fitting & fixing of M.S. Grill made out of M.S. flats/square bars as per drawing and design fixed in position to proper plumb, including a coat of priming with approved quality metallic primer, materials including cost, conveyance, taxes, transportation of all materials, cost of all labour, sundries, T&P etc. complete as per direction of Engineer in charge. (a)Ground Floor
3216.75
214878
66.8
(b)First Floor
106.2
7094
66.8
Supplying, fabricating & fixing of polished stainless steel (304 grade) items made out of pipes, angles, flats, plates, hollow tube, square pipe bracing as per approved design and specification, buffing, polishing etc. with cost, conveyance, labour in railing, parapet, staircase, space frame etc required for the work complete in all respect as per direction of Engineer-in-charge. (a)Ground Floor
900
299610
332.9
Structural steel work in riveted, bolted or welded built up sections, trusses and framed work with cutting, hoisting, fixing in position and applying a priming coat of approved steel primer including cost, conveyance of all materials, all labour, T&P etc complete as per approved design and specification.(Make:TISCO/RINL/VIZAG STEEL/TATA/APPOLO)
27658.5
2832230
102.4
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer with welding and bolted with special shaped washers (Hot finished seamless type tubes) including cost, conveyance of all materials, all labour, T&P etc complete as per approved design and specification. (Make:SAIL/TATA/JINDAL/APPOLA)
663.6
80892
121.9
Supply+ Erection + Transportation of 50mm thick double skin PUF Insulated sandwich Roof Panel having core with Trapezodial sheet in Top & Micro Ribbed Liner Panel sheet in Bottom skin. The PUF panel shall be manufactured on continuous line running on uninterrupted power supply. Panel shall have pre coated GaIvalume sheet on both side of Puf. The pre coated sheet shall be of minimum 550 Mpa steel. The PPGL sheet shall have plastic protective guard film of minimum 25 microns to avoid scratches during transportation. The PU Foam shall be self-extinguishing type confirming to IS 12436.Top Sheet: 0.5mm TCT PPGL RMP AZ-150 sheet with 550 Mpa tensile strength. Bottom Sheet: 0.5mm TCT PPGL RMP AZ-150 sheet with 550 Mpa tensile strength.including cost, conveyance, transportation of all materials, cost of all labour, sundries, T&P etc. complete as per direction of Engineer in charge. (Make:Kingspan Jindal/LLoyd/ Equivalent)
650
1738750
2675
Flashing Sheet
1000
120000
120
Endcap (as per design)
100
10000
100
Providing and fixing Glass Reinforced Concrete (G.R.C) Screens in approved size, pattern, design, shadeand thickness of 50mm on frame and design element in 30mm thick have weight approximately between 3.5 – 4 Kg per Sq. Ft. and color of M/S UniStone make or equivalent. The above weight and thickness is considering dimensions of screens up to 2133mm in height and 1219mm in width and having at least 50% void space. The screens should be made from ‘53 grade’ White Portland Cement manufactured by ‘JK Cement’ or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by ‘N.E.G JAPAN’ or equivalent, Super Plasticizers manufactured by ‘BASF’ or equivalent, Polymers manufactured by ‘BASF’ or equivalent and U.V resistant Synthetic inorganic pigments should be used for pigmentation manufactured by ‘BAYFERROX (Germany)’ or equivalent. The material casting should take place in FRP Molds. The fixing of Screens should be ‘Dry fixing’ i.e. to be done with M.S Galvanized Clamps, fixtures and fasteners of Hilti / Fischer.etc complete as per direction of E.I.C
24
142288
5928.7
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:
(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm.
up to two decimal places.
15
61417
4094.5
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).
72
24354
338.25
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:(a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including: (b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.(c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.(d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight. (e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. up to two decimal places. Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately. The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NABL
accredited lab or by any other accreditation body which operates in accordance
with ISO/ IEC 17011 and accredits labs as per ISO/ IEC 17025.
9.9
28374
2866.1
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick hard coated low emmissivity glass, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc.
all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor.“(Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.26.2)“For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.“ (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light
reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.
9
27324
3036.1
Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete Wheel above 50 mm dia Ground Floor
2
474
237.1
Supplying ,fitting and fixing of ISMB Sections for cow catcher (6.4m x 1.5m) including labour for lifting,hoisting and placing in position to required size and length ,pre fabricating by cutting to sizes,priming including cost of all materials,cost of all labour,loading,unloading at site,all accessories,T&P required for the work complete in all respect as directed by Engineer in Charge. Cow-Catcher at entrance Gate
3077.25
315110
102.4
Providing ,Supplying & Fixing of 80mm dia heavy gauge G.I. Pipe for cow catcher (6.5mX1.5m) including labour for lifting,and placing in position to required length,pre fabricating by cutting to required length,priming including cost of all materials, cost of all labour,loading,unloading at site ,all accessories,T&P required for the work complete in all respect as directed by Engineer in Charge. Cow-Catcher at entrance Gate
75
47910
638.8
Supplying ,fitting and fixing of 25x6 MS Flat including labour for lifting and placing in position to required length, pre fabricating by cutting to require length ,priming including cost of all materials,cost of all labour,loading,unloading at site,all accessories,T&P required for the work complete in all respect as directed by Engineer in Charge. Cow-Catcher at entrance Gate
19.39
1295
66.8
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre
193.41
53593
277.1
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
522.21
53474
102.4
Excavation in soil using Hydraulic Excavator CK-90 & Tipper with Disposal upto 1000 metres-Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000 metres.
679.75
60021
88.3
Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction.
226.58
8066
35.6
Construction of granular sub-base by providing close graded Material grade VI, spreading in uniform layers with motor grader on prepared surface,mixing by place in method rotavator at OMC, and compacting with vibratory power roller to achieve the desired density, complete as per clause 501
302.11
860808
2849.32
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.
377.64
1126851
2983.93
Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP - 63:2018.
1442.4
877556
608.4
Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408.
454.3
166800
367.16
Supplying and fixing of Pre cast kerb stone of size 300mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984.
1514
246115
162.56
Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces as per section 800 of MoRTH specifications for Road & Bridge works (5th revision) and instruction of Engineer in charge
165.82
12688
76.52
Providing and fixing Neelgiri/Mexican grass turf with earthy 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light, watering with sprinkler and maintenance for 30 days or more till the grass establish properly as per direction of officer incharge.
1316
272148
206.8
Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment).
394.8
159854
404.9
Supplying and stacking sludge at site including royalty and carriage upto 5 km complete (sludge measured in stacks will be reduced by 8% for payment).
131.6
38690
294
Supplying and stacking at site dump manure from approved source, including carriage upto 5 km complete (manure measured in stacks will be reduced by 8% for payment) . Screened through sieve of I.S. designation 20 mm
43.87
10019
228.4
Screened through sieve of I.S. designation 16 mm
43.87
10919
248.9
Screened through sieve of I.S. designation 4.75 mm
43.87
11634
265.2
Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
131.6
3921
29.8
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge.
131.6
2684
20.4
ELectrical Installation Wiring for light point/ fan/ exhaust fan point/ call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed 2 mm thick PVC conduit with modular switch and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable including providing modular box with cover of requisite number of modules including providing cover plates as required.(Make: Legrand(Myrius)/ Anchor(Vision)/ Crabtree(Athena) Single light point controlled by one 6A switch or first light point of group control.
122
84302
691
Subsequent point of group control
41
18368
448
Supplying and fixing two module steeped type electronic fan regulator with proper modular plate switch box including connections etc. as required.
18
8892
494
Supplying and fixing 6 Amp plug with 6 Amp switch (Modular Type) on existing board.
10
4310
431
Supplying and fixing including testing and commissioning of 6A modular socket outlet with 6 Amp switch including providing GI modular box with faceplate etc as required. 1 nos 6 Amp 3-pin socket with 6 Amp switch.
20
10900
545
2 nos 6 Amp 3-pin socket with 2 nos 6 Amp switch.
5
3555
711
Supply, installation, testing & commissioning of 6 / 16 Amp Plug Boards consisting of a 16 Amp clip-in type modular switch with indicator and a 6/16 Amp clip-in type modular socket fixed on metallic concealed box including interconnections and making good the damages caused complete as required and as per direction of Engineer-in-charge.
40
22600
565
Supplying, installation, testing & commissioning of 25 amp modular socket outlet on surface or in recess, on 1 Nos two module GI box with plate etc. complete as direction of Engineer-in-charge. As per Crabtree(cat no-ACT0202504) or equivalent of Legrand/Schneider.
8
10680
1335
Wiring for circuit/ submain wiring along with earth wire of following size of FRLS heavy gauge PVC insulated copper conductor single core cable in heavy duty PVC conduit laid in surface/ recess as required. 2X1.5 + 1X1.5 sqmm FRLS Cu wire (for circuit wiring)
1800
325800
181
2X2.5 + 1X2.5 sqmm FRLS Cu wire (for Light plug circuit wiring)
2400
494400
206
2X4 + 1X4 sqmm FRLS Cu wire (for power plug )
2100
497700
237
4X6 + 2X6 sqmm FRLS Cu wire (submain)
700
362600
518
Supply, delivery and fixing of Ceiling fan hook box made out of 18 swg GI sheet and containing 10 mm dia round ms bar projecting atleast 150mm on either side & duly bent to accommodate ceiling fan down rod bolt & having earthing arrangement as per direction of Engineer-in-charge.
18
2160
120
300W LED Sports Light fitting (=28000 Lumen) with 80CRI (4KV inbuild & 10KV external surge protection, IP66, Aluminium die cast body,cool white-(5600K to 6500K),Impact resistance of IK08, Over current, short circuit, over voltage , dust & water protection, entire luminarie should act as Heat shrink(LED life50000 burning hour),The fixture must have 3-4mm thick safety glass cover with BIS Certified driver of IP67 protection & Driver of make Moso/Inventronics/Sosen or equivalent. Light Fixture of make Philips/ DISANO/Abacus/Havells/panasonic.(Note:The fixtures proposed must have passed LM 79 reports from NABL laboratory will be submitted with Warrenty of Minimum 5years and Fixture must have complay lighting design requrement of 1000lux with uniformity as per requirement of sports)
44
1220692
27743
Supply of Recessed/surface Mounted 2'/2' Led Down Lighter comprising of 42W LED with non integral / integral driver, 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy 120 lm/W. LED driver PF 0.95 & THD 20%. The colour rendering index of LED light should be more than 70. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc. to complete the job. make required: Philips/wipro/Halonix/Havells/panasonic.
4
33176
8294
Supply of Recessed/surface Mounted 2'/2' Led Down Lighter comprising of 32W LED with non integral / integral driver, 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy 120 lm/W. LED driver PF 0.95 & THD 20%. The colour rendering index of LED light should be more than 70. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc. to complete the job. (make required:Philips/wipro/halonix/Havells/panasonic).
36
164556
4571
Supply of Recessed/surface Mounted Led TUBE Light comprising of 20W LED with non integral / integral driver, 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy 120 lm/W. LED driver PF 0.95 & THD 20%. The colour rendering index of LED light should be more than 70. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc. to complete the job. (make required:Philips/wipro/halonix/Havells/panasonic).
16
21664
1354
Supplying, installation testing and commissioning of 9 MTR galvanized PU painted octagonal pole with 100W Stereet light, 6 A MCB, Connector with all other wiring material.Pole with top dia - 70 MM ,Bottom dia - 155 MM, PCD- 250 MM, thickness 3.1 mm with foundation bolt and decorative bracket of 1 MTR long suitable for holding 1 nos 100W LED street light . The pole design must suitable for wind speed as per IS 875. IS 2062 grade E350 / BS EN 10025 S355 .Low Silicon (≤ 0.06%) High Tensile Steel Sheet as per IS 2062 / BS EN 10025 Or Equivalent. Hot Dipped Galvanized, as per BS EN ISO 1461 Average coating should be 55 microns. E250 Grade as per IS 2062 of Make(Bajaj Cat no:BOP 9030 or equivalent of Klite/ Valmount)100W LED street light with Epoxy powder coated pressure die-cast aluminium housing and LED driver cover with silicon gaskets provided for LEDs and control gear compartments. LEDs Must have with non-yellowing secondary lens optics. The driver used is specially designed to have built-in surge voltage, open/short circuit protections. External surge protection of 10 KV provided for additional safety. Side entry mounting for 55 to 60mm OD pipe bracket. Top maintenance: Access to driver is from the top. The fixture must have 12000 LM with peak power consuption of 100W. The lighting fixture must deliver avg. 25 Lux of 6 MTR road (make:Bajaj Model No. ENXT P 120L WH or equivalent to Phillips / LT/Utkrash)
12
472932
39411
Supply of Recessed/surface Mounted Led Down Lighter comprising of 10W LED with non integral / integral driver, 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy 120 lm/W. LED driver PF 0.95 & THD 20%. The colour rendering index of LED light should be more than 70. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc. to complete the job. (make required:Philips/wipro/halonix/Havells).
20
31260
1563
Supply of Recessed/surface Mounted Led Mirror Lighter comprising of 12W LED with non integral / integral driver, 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy 120 lm/W. LED driver PF 0.95 & THD 20%. The colour rendering index of LED light should be more than 70. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc. to complete the job. (make required:Philips/wipro/halonix/Havells/panasonic).
2
992
496
Supply of Recessed/surface Mounted Led Down Lighter comprising of 15W LED with non integral / integral driver, 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy 120 lm/W. LED driver PF 0.95 & THD 20%. The colour rendering index of LED light should be more than 70. Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc. to complete the job. (make required:Philips/wipro/halonix/Havells/panasonic).
22
49720
2260
Supply & Installation of surface LED Luminarie of Entry/Exit Light with back up for 2 hrs. of (make required:Philips/wipro/halonix/Havells/panasonic).
4
25300
6325
Supply & Installation of GATE LED Light of make (make required:Philips/wipro/halonix/Havells/panasonic).
2
17854
8927
Supply & Installation ofLED Bulk head Light fitting (10 w) of make (make required:Philips/wipro/halonix/Havells/panasonic).
4
6252
1563
Supplying, installation, testing and commissioning of ceiling fan (5 star rating) including wiring the down rod, earthing etc as required (Make : Bajaj/ Crompton/Khaitan/ Havells). 1200 mm sweep
18
38574
2143
Supplying, installation, testing and commissioning of Exhaust fan / fresh air fan with louvre (Make : Bajaj/ Crompton/Khaitan/ Havells). as required. 250 mm sweep fibre body fresh air fan
12
19248
1604
Supplying and fixing following way, TPN/SPN, sheet steel, MCB distribution board, 415 V/230V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCBOs/ISOLATORS) 4 way, Double door as LDB.
2
7518
3759
6 way, Double door as PDB.
3
13863
4621
12 way, SPN DB as UPSDB.
2
4900
2450
4 way, Vertical TPN DB.
1
8971
8971
Supplying and fixing following rating RCBOs/ MCBs in the existing DB complete with connections,testing and commissioning etc. as required 63 Amps4P, 100 MA RCCB
5
20495
4099
63 Amps4P, 10 KA FP MCB
1
2270
2270
32 Amps DP,10 KA MCB
14
11228
802
6 Amp to 32 Amp, 10 KA SP MCB (C-Curve)
102
32436
318
Supplying and fixing of following sizes of heavy gauge PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm
1000
57000
57
25 mm
750
51750
69
Supplying and fixing of following sizes of heavy gauge steel conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm
300
44100
147
Wiring for point/circuit wiring along with earth wire of following size of PVC insulated PVC sheathed FRLS multicore flexible copper cable laid on existing cable tray/through conduit as required. (Make:-Polycab/Finolex/KEI/Anchor) 3C X2.5 sq.mm . (for Light Point wiring)
1000
156000
156
Supply, Installation, Testing, Commissioning of highwall split units of following capacities including proper mounting arrangements and accessories, copper refregirant piping,pvc drain piping,power cable,control cable, initial charge of refrigerant, safety limit thermostat, etc complete including 5 KVA voltage stabilizers. ( Make - Voltas, Carrier, LG or Hitachi ) 2.0 TR capacity.
8
468208
58526
Supply, instalaiton, testing and commission of SOFT COPPER REFRIGERANT PIPING OF 18 swg for high wall uints of various sizes with necessary supports, fitting interconnecting the liquid and the suction lines between the aircooled outdoor unit and the indoor unit. Both suction and liquid line shall be insulated with 19mm thick nitrle rubber tubes as insulation material and shall be covered with treated woven glass fiber reinford covering etc. complete as per the specifications and approved drawings. 1 1/8" Dia
60
44340
739
5/8", Dia
60
16980
283
Supply, Installation, Testing & Comissioning of 6 KVA IGBT based True Online Smart UPS dual mains I/P with 12V/18AHX15 Nos of VRLA Sealed maintenance free(independent 12V units cell bank capacity designed for end cell voltage of 1.75V at 27 degree C.) Battery with 30 Min Back Up on 90 % Running load along MS Battery Rack & Battery interconnection link with CB and other standard accessories for installation.(Make: RIELLO / EMERSON /APC ).
1
165000
165000
Supply and laying of Cat6 4-pair 23AWG LSZH UTP Cable for data and voice in existing conduits/trunking. Make: Digisol/ Schneider/ AMP.
150
9000
60
Supply and termination of RJ-45Jack of Category 6 with Dual-port British-style Face plate 86x86 mm with Curveture and wall mount box. Make: Tyco-AMP/ Schneider/ Digisol
5
3150
630
Supply and Fixing of Cat 6 24-port loaded, Modular Jack Panel having 24-port individually replaceable module. Make: Tyco-AMP/ Schneider/ Digisol
1
9090
9090
Supply Installation of 24port 10/100/1000Mbps L2 Managed Switch with Four SFP Ports. Make: Cisco/ HP/ Digisol / Netgear
1
36820
36820
Supply and Fixing of Cat6 Factory crimpped moulded 1mtr patch cord. Make: Tyco-AMP/ Schneider/ Digisol
5
1750
350
Supply and Fixing of Cat6 Factory crimpped moulded 2mtr patch cord. Make: Tyco-AMP/ Schneider/ Digisol
5
2000
400
Supply and Fixing 30 Pair MDF BOX with Krone Module & Steel Back Mounting Frame
1
5180
5180
Supply Laying of 2 pair 0.5 cupper cable. Make : Finolex/ Polycab/RR/ Kei.
60
2400
40
Supply of 20 pair 0.5mm PIJF armode cable. Make : Finolex / Polycab / Kei
50
8500
170
Supply, installation, testing & comissioning of EPBAX System 4 P&T Lines / 2 Digital / 24 Extensions expandable up to 48 Extension having Features: Call Pickup , Call Forwarding , Direct inward Dialing Direct Outward Dialing, Calling Line Restriction etc as required. Make: MATRIX/ SYNTEL/ NEC
1
36820
36820
Supply, installation, testing & comissioning of Push Button Telephone Set. Make: PANASONIC/ BEETEL/ BPL
2
1720
860
Supply, installation, testing & comissioning of Digital Key Telephone as required. Make- MATRIX/ SYNTEL/ NEC/BEETEL/PANASONIC
1
5180
5180
Supply & Fixing of 9U Wall Mount Rack loaded with one no 4Skt 6/16A power distribution unit, 1no cable manager, 1no 90CFM FAN, one pkt H/W screw. Make: Valrack/APW/Retail
1
9440
9440
External Electrical DG set as above Supplying, Installation, Testing and Commissioning of starts Silent Diesel Generating Set having prime power rating of 62.5 KVA at 0.8 pf at NTP conditions (Alternator directly coupled with Diesel Engine) suitable for automatic operation on mains failure Panel complete in all respect and comprising of following and as per specification enclosed, suitable for indoor installation. A. Alternator : Self excited, self regulated, brush less type 415 Volt 3 phase 50 Hz synchronous generator delivering 62.5 KVA at 0.8 PF (lag) at NTP condition Conforming to IS/ IEC 60034- 1, screen protected self regulated + 1% regulation, IP 23 protection with insulation Class-H, AC alternator complete with, 200 Amp MCCB and outgoing terminals taken out for connecting through Cable along with all accessories.(Make:Layrosomer/stamford) B. Engine : Four(4) stroke, Multi-cylinder Turbo charged Radiator Cooled Diesel Engine of suitabe BHP (to give prescribed output excluding power consumption for running Auxiliary Accessories) operating at 1500 rpm, daily fuel tank of 440 ltr capacity duly calibrated including medium class MS piping for fuel piping from day tank to Engine and back, residential type silencer, SS flexible below for exhaust pipe and 24 V DC starting arrangement with 2 Nos 12 V battery having Ampere- Hr rating as prescribed by the manufacturer of Engine along with battery charger, as required (Make:Cummins/ perkins) c. Base Plate : Common base plate of required size for mounting of engine alternator set fabricated from MS channel and vibration damping arrangement with cushy foot mounting i/c painting as per standard practice of manufacturer etc. required.
1
734343
734343
Supply, installation, testing and commissioning of cubicle type sectionalised, front operated bottom entry dust and vermin proof( IP65)M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrienkable PVC sleeve, base channel, complete with all accessories including interconnections, earthing etc as required. One (1) - 250 Amp, 36 KA, 4P MCCB with 3 Nos Phase indicating lamps with control fuse/ MCB, 3 Nos 250/5 A 15VA Cl 1.0 CTs, Digital Voltmeter, Ammeter.
1
145066
145066
Supply, installation, testing and commissioning of cubicle type sectionalised, front operated top entry dust and vermin proof M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrienkable PVC sleeve, base channel, complete with all accessories including interconnections, earthing etc as required. Busbar -400 AL busbar with SC rating of 36KA suitable for operation at 415 Volt, 50 HZ , 3 phase Supply. One (1) 40 Amp TPN 25 KA MCCB with 32 Amp TP contactor, over load trip, Programmable timer for automatic switching ON and OFF of external lighting, Auto/ Manual selector switch, Auxilliary Contactor, ON/OFF push button and indication along with control fuse etc as required.
1
502096
502096
PANEL AS ABOVE Supplying installation testing commissioning if double door feeder pillar fabricated out of 2 mm thick CRCA sheet duly painted, 200 copper busbar with neutral bus rincluding cc/ brick foundation as required including following internal fixtures. 1 No - 40 Amp 4P MCB Incomer 1 No - 16 Amp SP MCB with 6/16 Amp socket outlet with 10 Amp modular switch and 1 No- Bracket Holder with 6 Amp Modular switch.
1
19312
19312
Supplying & Testing of 1.1 KV grade Aluminium XLPE power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply. 3.5C X 120 sqmm
150
77550
517
3.5C X 35 sqmm
70
13580
194
Supplying & Testing of 1.1 KV grade Copper XLPE power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply. 3C X 6 sqmm
230
45540
198
2C X 10 sqmm
530
119780
226
Laying & fixing of one no. PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size on Cable Tray as required. upto 35 Sqmm(clamped with 1mm thick saddle)
70
2310
33
Above 95 Sqmm and upto 185 sqmm(clamped with 25/40X3mm MS flat clamp)
150
11100
74
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size direct in ground including excavation (75 cm),sand cushioning,protective covering and refilling the trench etc as required upto 35 Sqmm
760
168720
222
Above 95 Sqmm and upto 185 sqmm
150
35400
236
Supply & Making end Termination with brass compression gland and aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade (without cost of Cable) 3.5C X 120 sqmm
4
1956
489
3.5C X 35 sqmm
6
1800
300
3C X 6 sqmm
8
1776
222
2C X 10 sqmm
20
3960
198
Supplying instalaltion hot dip galvanized ladder type cable tray of following size including installation along wall/ suspended from ceiling with brackets/ threaded suspenders including bends etc as required. 150 mm (W) X 50 mm (H) with 1.6 mm thick sheet
200
189400
947
300 mm (W) X 50 mm (H) with 1.6 mm thick sheet
10
13400
1340
Supply & Fixing of Copper plate Earthing (600x600x3mm thick) including accessories, and providing masnory enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/coke and salt as required.
10
117940
11794
Providing and fixing 25 mm X 5mm copper strip on surface or in recess for connection etc as required.
200
201800
1009
Earthing with GI earth pipe 4.5 meter long,40mm dia incluiding accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required
6
24198
4033
Providing and fixing earth bus of 50mm X 5mm copper strip on surface connection etc as required.
5
9220
1844
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.
200
25600
128
Providing and fixing 6 SWG GI wire on surface or in recess for loop earthing along with cables etc as required.
250
9250
37
Supply, delivery and laying of following sizes of 2mm thick PVC Conduit concealed in wall/ column/ roof slab of the building alongwith other accessories and 18 swg GI wire complete for Electrical Wiring/Telephone / TV & Data cable wiring as required and as per direction of Engineer-in-charge. 20mm dia
2000
168000
84
25mm dia
500
45000
90
Supply, installation, testing and commissioning of 5 LB Clean Agent system complete with all necessary Clean Agent FK-5-1-12 / Novec 1230 (UL listed ) gas with PESO approved Cylinder , fitting, support , and accessories, connected with CE , PI Mark & PESO approved DLP Valve, End of Line Adaptor and Pressure Switch. Cylinder will be Helium Leak Tested to 10-7 mbar l/s for leakage proof(Make: SUPREMEX/ FIREBOY / AMEREX or equivalent )
1
142745
142745
Supply & Laying of Linear pneumatic heat Detection Tube with all necessary fittings & supports.
40
99360
2484
Supply, installation, testing and commissioning of Health Monitoring Panel with Audio Visual Alarm. The Panel Should have Provision for integration with Fire Alarm/ SCADA/ BMS System.(Make: SUPREMEX or equivalent)
1
8423
8423
Supplying and laying UPVC pipe (80 Schedule) of following diameter burried in ground at appropriate depth for cable laying as required. 110 mm dia
40
11840
296
Supplying installation testing and commissioning of 125 KVA 11/0. 415 KV 3 Phase, 50Hz, Dyn11, oilcooled ONAN type, Outdoor type, copper wound transformer Confirming to IS:1180(Part-I), 2014 and Energy Efficiency Level-3 with OFF load tap changing arrangement on HV side from + 5% to -10% in steps 2.5% along having cable end box on HT and LT side, complete with, oil and winding temperature indicator and alarm contact, PRV, MOG with all accessories i/c first filling of filtered dehydrated oil asPer direction of EIC.(Make:OTPL/ ALFA/CG/Kirlosker)
1
388327
388327
Supply , Installation, Testing & commissioning of 8 mm Aluminum Round Conductor.
Tested as per IEC 62561. (Make:OBO/ABB/FURSE) Supply , Installation, Testing & commissioning of Roof conductor holder for parapet- Polyamide Conductor holder:
With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder.
Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance.
Tested as per IEC 62561. (Make:OBO/ABB/FURSE) Supply , Installation, Testing & commissioning of Roof conductor holder - Stainless steel Conductor holder:
With Bottom section and conductor holder stainless steel (V2A)Bottom section with Ø 8.5 mm slot. Tested as per IEC 62561. (Make:OBO/ABB/FURSE) Supply , Installation, Testing & commissioning of cross universal connector: For T and cross connection, to route vertical down conductor /mesh formation made of hot dipped galvanised iron with necessary screws etc as required. Installed with 4 hexagonal bolts M8*25 with M8 hexagonal nuts .
Tested as per IEC 62561. (Make:OBO/ABB/FURSE) Supply , Installation, Testing & commissioning of expansion piece with connector: For equalising temperature related length changes. Necessary on conductors length over 20 meters. For round conductor Rd 8/ALU. Tested for 100kA lightning current. (Make:OBO/ABB/FURSE) Supply , Installation, Testing & commissioning of Connector: For T cross and parallel connectors. Quick installation using hexagonal bolt M10X30 high-grade hot dip galvanised. Tested as per IEC 62561.(2nos/expansion piece ). (Make:OBO/ABB/FURSE) Supply , Installation, Testing & commissioning of 1 mtr vertical air terminal with mounting accessories on the flat surface to meet the requirements of IS/IEC 62305. Tested for Electrical , mechanical and chemical as per IEC 62561. Tested for 100kA lightning current. (Make:OBO/ABB/FURSE)
1
433160
433160
Supply, installation, balancing and commissioning of factroy fabricated G.S.S. (Class VIII 120 GSM) rectangular ducting complete with neoprene rubber gaskets, elbow, splitter dampers, vanes, hangers, supports etc as per approved drawings and confirming to SMACNA standard of following sheet thickness complete as required. 24 G ( 0.6 mm)
100
98300
983
22 G (0.8 mm)
60
69240
1154
Supply & fixing of Acoustic lining of supply air duct and plenum with 12mm thick rigid thick board glass wool having density of 48Kg/CuM, with 25 mmX 25 mm GI section of 1.25 mm thick, at 600 mm center to center covered reinforced plastic Tissue paper & 0.5 mm thick perforated Aluminium sheet (30% perforation) fixed to inside surface of the ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc as required & as per specifications. and as per approved shop drawings.
60
30600
510
Supplying, installation, testing and commissioning of following direct driven Tube axial type fan and casing suitable for smoke exhaust application & for 300 Deg C for 2 hours Class F rating. Motor shall be suitable for 415 Volt 50 c/s, 3 ph AC supply and of efficiency class IE2.The fan shall be equipped with mounting bracket & outlet cone required at discharge. 2500 cfm , 10 mm Spwg
4
125768
31442
Supplying, installing and commissioning of ISI ABC Powder 4 Kg Fire Extinguisher containing Mono Ammonium Phosphate Powder 50, Stored Pressure Type,Pressure Gauge, fittted with discharge hose, wall mounting bracket etc., Discharge Time less than 15 Secs, Controllable discharge mechanism, Range minimum 4 Meters, applicable on Class A,B,C and electrically started Fire, A Rating- 8A, B Rating 34B, Can Construction : Deep drawn & Co2 Mig welded, Valve Construction : Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster Powder coating, Sheet metal thickness : 1.60MM, ISI approved as per IS:15683:2006(Make: superimax/Cese fire/Minimax)
6
22080
3680
Supplying, installing and commissioning of CO2 Type 4.5 Kg Fire Extinguisher containing Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, fittted with discharge hose, wall mounting bracket etc., Discharge Time less than 15 Secs, Controllable discharge mechanism, Range minimum 4 Meters, applicable on Class A,B,C and electrically started Fire, A Rating- 8A, B Rating 34B, Can Construction : Deep drawn & Co2 Mig welded, Valve Construction : Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster Powder coating, Sheet metal thickness : 1.60MM, ISI approved as per IS:15683:2006(Make: superimax/Cese fire/Minimax)
2
20852
10426
Fire buckets (FILLED WITH SAND) round bottom type enamel painted, white inside & Red out side and Letter "FIRE" in black out side and handle with mounting bracket.
2
7390
3695
Supplying, installation, testing and commissioning of Addressable Multi Detector(Smoke cum Heat) complete with base and isolator as per direction of Engineer-in-charge.
16
65008
4063
Supplying, installation, testing and commissioning of Addressable Beam(Infrared) Detector including Transmitter & Receiver, complete with base and isolator as per direction of Engineer-in-charge.
2
240698
120349
Supply and installation of visual type response indicators with LED indicating lamp, housed in suitable MS enclosure with acrylic cover fixed in flush with wall to operate in conjunction with smoke/Heat detectors operating on 24 VDC installed above the false ceiling or below the false floor, complete with all accessories and fixing materials as required and as directed by Engineer-in-charge.
1
677
677
Providing S.I.T.C of Microprocessor based Addressable Fire Alarm Control Panel (2 Loop) suitable for serving the followingg detectors & Devices in maximum with LCD display, complete with) 2 Nos 12 Volt 40 Ah SMF battery, Battery backup and also provision for 2 Nos potential free Normally open contact per loop to be used for interlocking of AHUs in the event of fire as per direction of Engineer-incharge.
1
244699
244699
Supplying, installing ,testing and commissioning of break glass type Manual call point . The Manual call point with monitor module shall be single stage type with all accessories and suitable sinages complete., the Manual call point shall be as per technical specification. and shall be of EN and LPCP listed.
1
4124
4124
Supplying, installing ,testing and commissioning of Hooter Cum Strobe at 85 dBA @ 3m for Audible annunciation and 75cd flashing at 1 Hz for visual indication. With Control Module. The Hooter cum Strobe with Control Module shall be flush or surface mountable type with all accessories etc., complete and as per technical specification. The devices shall be of EN and LPCP listed (Make: Bosch or Equivalents)
1
7510
7510
Supplying and drawing of 2X1.5 sq.mm PVC insulated PVC Sheathed FRLS cable in the existing surface/ recessed conduit with all accessories as per direction of Engineer-in-charge.
200
17400
87
Supply, delivery and laying of following sizes of Steel Conduit in surface/ in recess alongwith other accessories and 18 swg GI wire complete for Fire Alarm wiring including painting as required and as per direction of Engineer-in-charge. 20mm dia
150
18900
126
25mm dia
50
7350
147
Supply and Installation of Indoor Dome IR Network Camera (1/3" CMOS sensor,mini,pixel of 2048*1536 or higher video quality,frame rate of 20fps @ 4MP,H.264,H.264_High profile &MJPEg video compression,3.6mm Fixed lens,Physical ICR filter of both day and night,30mtr IR Distance,digital WDR range,3D-DNR for noise reduction,IPv4/IPv6 network supported,IP67 rated for weather proofing,ONVIF ver 2.2 or higher,POE IEEE 802.3af,UL,FCC,CE,ISO certified).Make: Unv/ Pelco / Honeywell
3
71781
23927
Supply and Installation of Outdoor Bullet IR Network Camera (1/3" CMOS sensor,mini,pixel of 2048*1536 or higher video quality,frame rate of 20fps @ 4MP,H.264,H.264_High profile &MJPEg video compression,3.6mm Fixed lens,Physical ICR filter of both day and night,30mtr IR Distance,digital WDR range,3D-DNR for noise reduction,IPv4/IPv6 network supported,IP67 rated for weather proofing,ONVIF ver 2.2 or higher,POE IEEE 802.3af,UL,FCC,CE,ISO certified).Make: Unv/ Pelco / Honeywell
6
143562
23927
Supply and Installation of 32Ch 4K Network video Recorder added with 32TB Hardisk storage.Make: Unv/ Pelco / Honeywell
1
348026
348026
Supply and lying of 4-pair Cat6 UTP cable for camera connectivity in existing conduits.Make:Finolex, D- Link, Secureye.
300
16200
54
Supply and Installation of 24port IEEE 802.3af and at POE 10/100/1000Mbps managed Switch with minimum Two combo ports with minimum PoE power budget of 375W per switch. Make: Cisco/D Link/Secureye.
1
33715
33715
Supply and Installation of 32" Commercial Display.Make: Samsung/LG/Panasonic
1
27190
27190
Supply,installation,testing & commissioning of poly crystalline solar pv panel of 3KWp along with inverter of suitable capacity(Make: Delta/Sova/Renesys)and meeting following condition/requirement. a)Minimum capacity of solar panel shall be 300Wp b)The solar panel frame shall made of aluminium c)The support shall be made of GI d)The top cover of solar panel shall be with 6mm thick tonghend glass h)One number energy meter installed for showing all electrical parameter.
1
207671
207671
KARIZMA COMMERCIAL MULTI GYM EVOLVE 4 station gym with 2 weight stacks of 72 Kgs each
Exercise Function – Leg press, Leg extension / curl, Chest press, Pec fly / Rear delt, Lat pull, Rowing, Knee raise, Push up stand etc.
Durable powder coated finish
Ergonomic Design / Scientific Biomechanics
Arc cover for protection
(Make:Viva/Cosco/Jordan)
1
133875
133875
EVOLVE POWER SQUAT RACK Ergonomically designed with smooth rounded corners for a safe workout environment. High grade Bio Mechanics. Highest grade Steeltubing & Epoxicoating High density, top grade foam provides safety, comfort and stability. For Commercial Use. (Make:Viva/Cosco/Jordan)
1
49560
49560
IMPORTED COMMERCIAL MULTI ADJUSTABLE BENCH E 1039 LENGTH : 1620 MM
WIDTH : 760 MM
HEIGHT : 810 MM
TOTAL WEIGHT : 61 KG (Make:Viva/Cosco/Jordan)
1
30800
30800
OLYMPIC FLAT BENCH J 023 EVOLVE • Main Frame : Flat oval tube • Cushion : Made of PU • EN ISO 20957-1& EN957-2 approved. For Commercial Use. Size: 1720*1670*1200mm N.W.: 81kg (Make:Viva/Cosco/Jordan)
1
40194
40194
Cable Crossover BS-005 • Main Frame : Flat oval tube • EN ISO 20957-1& EN957-2 approved
• Solid Body & Sturdy Steel Frame • Size : 3836x870x2330mm
• Weight Stacks: 100kgs x 2 N.W.: 358KG (Make:Viva/Cosco/Jordan)
1
133980
133980
EVOLVE FITNESS JF 1263 3 TIER DUMBBELL RACK Ergonomically designed with smooth rounded corners for a safe workout environment. High grade Bio Mechanics. Highest grade Steeltubing & Epoxicoating High density, top grade foam provides safety, comfort and stability. For Commercial Use. (Make:Viva/Cosco/Jordan)
1
34230
34230
evolve- RUBBER COATED SOLID DUMBBELL
* Made of hard-wearing impact resistant rubberised material, It won't release odd smell, It provides a smooth
non-tacky feel. Won't stain hands or cause any rubber deteriorated problems
2.5 x2 pair = 10kg
5 x 2 pair =20 kg
7.5 x2 pair = 30kg
10 x 2pair = 40 kg
12.5 x2 pair = 50 kg
15 x 2pair = 60 kg
17.5 x 2 pair =70 kg
20 x 2 pair = 80 kg
25 x2 pair =100 kg
30 x2 pair = 120kg Total Pairs = 20 pairs
Total Weight = 580 kg (Make:Viva/Cosco/Jordan)
250
61250
245
evolve- COLOURED RUBBER COATED OLYMPIC PLATES
* 3 hole easy grip design olympic plates and available in 29mm hole also
* Tear proof, sound less & bouncy effect
2.5 x 2pair =10kg
5 x2 pair =20kg
7.5 x 4pair =60kg
10 x 2pair =40kg
15 x 1pair =30kg
20 x1 pair =40kg
25 x1 pair =50kg
Total Weight = 250 (Make:Viva/Cosco/Jordan)
150
28875
192.5
evolve KETTLE BELL DUMBBELL 5kgx 1pair=10
7.5kg x1 pair=15
10kgx1 pair=20
12.5kgx1 pair=25 Total Pairs=4
Total weight=70kg (Make:Viva/Cosco/Jordan)
35
7350
210
JF 1264 PLATE TREE Ergonomically designed with smooth rounded corners for a safe workout environment. High grade Bio Mechanics. Highest grade Steeltubing & Epoxicoating High density, top grade foam provides safety, comfort and stability. For Commercial Use. (Make:Viva/Cosco/Jordan)
1
14910
14910
Imported POWER TOWER EVOLVE
Contoured arm rests for secure positioning Angled back pad for added comfort. Multiple grip positions for easy chin ups, dips, push ups and leg raise. LXWXH : 132X61X210 CM. (Make:Viva/Cosco/Jordan)
1
40250
40250
OLYMPIC BARBELL 20KG
*Heat treatment grip bar
*Max loading : 1000 lbs
*Length : 2.2 mtrs
(Make:Viva/Cosco/Jordan)
3
34650
11550
OLYMPIC BARBELL 15KG
*Heat treatment grip bar
*Max loading : 1000 lbs
Lenth : 72"
(Make:Viva/Cosco/Jordan)
3
18900
6300
OLYMPIC BARBELL 10KG
*Heat treatment grip bar
*Max loading : 750 lbs
Lenth : 60"
(Make:Viva/Cosco/Jordan)
2
11060
5530
OLYMPIC BARBELL 7.5KG
*Heat treatment grip bar
*Max loading : 500 lbs
Lenth : 48"
(Make:Viva/Cosco/Jordan)
2
9100
4550
TRAP BAR 20KG (Make:Viva/Cosco/Jordan)
1
10325
10325
TRAP BAR10KG (Make:Viva/Cosco/Jordan)
1
7350
7350
IR94064 - PLASTIC LOCK JAW (Make:Viva/Cosco/Jordan)
1
560
560
Weighing Scale-Digital EQ-EB-90
Equinox
Capacity 180 Kg
6mm thick tempered glass
2 inch – large LCD display
Auto-step-on feature
Auto off function
Low battery / Overload / Error indicator (Make:Viva/Cosco/Jordan)
1
2373
2373
High Measuring Stand-JMS-001 JMS-001 for calibration up to 2 meters high school model high jump stand with T shaped base or round base with painted steel upright calibrated both in inches and cm.JSS -01 for calibration up to 2 meters (Make:Viva/Cosco/Jordan)
1
1750
1750
• LED console readouts: incline, time, distance, calories, pulse, speed / rpm, level, watt, fan etc.
• Level Control : 16 resistance levels.
• 14 kgs flywheel.
• Both forward & reverse motions offer various workout options
• Mp3 with speaker • Self Generated system.
• Maximum user weight : 180 kg. (Viva/Cosco/Jordan)
1
112000
112000
Commercial Group Bike CFS 4100
Ultra sturdy design.
New fully covered design making it sweat proof.
Adjustable seat and handle.
High quality ribbed belt with tension wheel driving system.
Press type braking system.
Maximum user weight : 150 kg. (Viva/Cosco/Jordan)
2
67200
33600
Providing all materials, labour, T&P for fixing of following sizes of bevelled edge mirror of 6mm thick mounted on 6mm thick AC back sheet & CP cup screw with PVC wall plugs in all floor including cost, conveyance, taxes of all materials complete as per specification and direction of E.I.C. ( CERA/Golden fish/ Saint gobain)
28.8
90345
3137
Providing and Fixing of Yonex Make BADMINTON POLE ( Portable & Movable ) 50kg weight on each side Metal pipe 46mm, A very strong and durable portable unit .
2
456934
228467.1
BADMINTON NET ( Tournament Quality )
4
13938
3484.5
Badminton racket Vector X
8
32522
4065.3
Nylon Shuttle Cock Tournament Vector X
12
69690
5807.5
Providing and Placing of Executive Desk of Size 1500 mm x 750 mm x 728 mm as per Picture (Make:Godrej/Geeken)
3
48306
16102
Providing and Placing of Executive Chair Model Ventilo Mid Back - Black as per Picture (Make:Godrej/Geeken)
3
17034
5678
Providing and Placing of visitor chair Model–1018 (Black) as per Picture (Make:Godrej/Geeken)
8
23056
2882
Providing and Placing of Gain Storage 500 - For Athletes 2 door as per Picture (Make:Godrej/Geeken)
4
78424
19606
Providing and Placing of Wooden Bench (2400 mm long) as per Picture (Make:Godrej/Geeken)
6
112350
18725
Providing and Placing of dining chair Model–
Unwind ss as per Picture (Make:Godrej/Geeken)
4
10092
2523
Providing and Placing of 2 Door PLU Lockers 1830Hx380Wx450D as per Picture. (Make:Godrej/Geeken)
35
345555
9873
Providing and Placing of Dustbin as per Picture. (Make:Godrej/Geeken)
10
23500
2350
Directional & Fire Exit - Providing and fixing 8mm thick clear acrylic autoglow sheet with vinyl text matching to specified colour, both sideS lettering as approved. Cost to be inclusive of wastage, suspension by means of SS strings, including of all materials, labour, conveyance, sundries, tools and plants etc complete in all respect as per the direction of Engineer-in-charge.
7
23100
3300
Fire Signages - Providing and fixing 8mm thick clear acrylic autoglow sheet with vinyl text matching to specified colour, both sideS lettering as approved. Cost to be inclusive of wastage, suspension by means of SS strings including of all materials, labour, conveyance, sundries, tools and plants etc complete in all respect as per the direction of Engineer-in-charge.
10
33000
3300
Type - 1, Size - 450mm x 200mm made of 6mm acrylic board + vinyl/PVC sticker with stud including of all materials, labour, conveyance, sundries, tools and plants etc complete in all respect as per the direction of Engineer-in-charge.
19
18604
979.2
SS English Letter of Size 400mm
24
32640
1360
SS Odia Letter of Size 300mm
14
14280
1020
PUBLIC HEALTH Internal PH Providing all materials, labour, T&P for laying/fixing of following dia CPVC pipes S.D.R-11 as per IS-15778 with ISI mark including fixing of required size CPVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floor or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes,duties,transportation scaffolding etc. as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHIRVAD/AJAYA/AKG,/SUPREME/TRUEFLOW. 50mm dia
46
67482
1467
40mm dia
120
109200
910
32mm dia
4
2684
671
25mm dia
40
17080
427
20mm dia
30
9360
312
Providing all materials, labour, T&P for laying/ fixing of following dia uPVC pipes Sch-80 as per ASTM-D-1785/2004 including fixing of required size PVC fittings like bend, Tee, elbow, offsets etc. and the same fixed on wall or floor with holder bat clamps screw in all floors or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes, duties, transportation, scaffolding etc. as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHIRVAD/AJAYA/AKG,/SUPREME/TRUEFLOW. 50mm dia for Drinking & Flushing from source to GL
30
17850
595
50mm dia for Drinking & Flushing from GL to OH Tank
30
16380
546
Providing all materials, labour, T&P for laying/fixing of following dia uPVC Aquasafe pipes as per IS-4985 with ISI mark of 6 kgf/cm2 including fixing of required size uPVC fittings like,bend,Tee,elbow,offsets,etc. and the same fixed on wall or floor with holder bat clamps screw in all floors or laying in trenches including excavation of earth work in all kinds of soil & backfilling the trenches as per specification & testing the joints with required water presure.The cost inclusive of all taxes, duties, transportation, scaffolding etc. as per specification and direction of Engineer-in-charge. Make:ASTRAL/ASHIRVAD/AJAYA/AKG,/SUPREME/TRUEFLOW. 50mm dia
33
7326
222
Providing all materials labour, T&P for making grooves in bricks/stone masonary walls vertically or horizontally up to required depth and width in all floor for laying of pipes and fittings up to 50mm dia, testing the joints with required water pressure and making good the damages with cement concrete 1:2:4 with 12mm size h.g.c.b.chips and finished smooth with cement morter (1:4) to original shape including cost of materials, curing, conveyance, taxes of all materials etc. all complete as per specification & direction of EIC.
78
16380
210
Providing all labour,T&P for cutting holes in bricks or stone masonry wall for taking pipes in all floors and making good the damages with cement concrete 1:2:4 finished smooth with CP 1:4 to original shape including cost of all materials, curing, conveyance, taxes, duties etc. all complete as per specification & direction of Engineer-in-charge. For 15mm to 50mm dia pipe to pass in 125mm to 250mm thick wall
16
848
53
For 75mm to 150mm dia pipe to pass in 250mm thick wall
15
2475
165
Providing all labour,T&P and cutting holes in RCC chajja/roof/floor for taking pipes through and making good the damages with supply of all required materials etc. complete as per the direction of the Engineer-in-charge.
6
1182
197
Providing all materials, labour, T&P for fitting & fixing of following Bronze Ball Valves confirming to IS-778 with ISI mark in all floor & fixing with the pipes after cutting the pipes to required shape & size including wastage etc. of following nominal diameter, all complete including testing the joints with required water pressure.The cost inclusive of all taxes,duties,transportation scaffolding etc. all complete as per specification and direction of Engineer-in-charge. Make:ZOLOTO. (As per Art no.1008 & HSN Code-84812000 of ZOLOTO) 25mm dia Bronze ball valve
6
9450
1575
40mm dia Bronze ball valve
6
25506
4251
50mm dia Bronze ball valve
5
32780
6556
32mm dia Bronze ball valve
2
6142
3071
50mm dia brontz horizontal check valve
1
3625
3625.1
Providing all materials, labour, T&P for fitting and fixing white glazed vitreous chinaFloor mounted water closet Rimless (European pattern)confirming to IS 2556: ART-8-2004 ,with p-22Trap with seat cover (solid) of approved make in all floor including supply of sutaible bracket, PVC wall plug and Brass screws etc. all complete including cost, taxes and conveyance as per specification all complete as per direction of Engineer-in-charge. Make : JAQUAR/HINDWARE/CERA/PARRYWARE. SLS-WHT-6851S300UFSingle Piece-WC with UF soft closeseat cover, Hinges, Fixing Accessories,Accessories Set and Cistern fittings,Size: 360x725x735 mm, S Trap-300 mm
10
284430
28443
Supply all materials and labour for fitting and fixing of following size white glazed vitreous china Half Padestal wash hand basin of approved make in all floor of approved quality including cutting the walls & floor and making good the damages with cement concrete (1:2:4) etc. including all taxes, duties, transportation etc. all complete as per direction of EIC. (Make:JAQUAR/HINDWARE/CERA/PARRYWARE) Half pedestal basin FNS-WHT-40801 Wall Hung Basin with Fixing Accessories Size: 620x480x185 mm & FNS-WHT-40305Half pedestal with Fixing Accessoriesfor 40801
9
75483
8387
Supplying all materials, labour & T&P for fitting and fixing of following sizes of white glazed vitreous chinaCROTO urinal basin confirming to specification of approved make as per IS-2556 with ISI mark in all floor along with supply & fixing of necessary component parts like pair of C.I./M.S. bracket including connection from supply pipe with all taxes, duties, transportation etc. all complete as per specification & direction of the Engineer-in-charge.(Make:HINDWARE/PARRYWARE/CERA) Urinal CROTO (Back inlet) (30X33X45cm) starwhite
3
9879
3293
Providing all materials, labour, T&P for fitting and fixing of white glazed vitreous china water closet (European pattern) 'P' or 'S' type with cistern & seat cover, wash hand basin of size 650mmx350mm with one pair basin bolt, one no. hinged rail 760mm long & 5 nos. grab rails 600mm long including supply of sutaible PVC wall plug and Brass screws etc. suitable for handicapped toilets in all floor etc. all complete including cost, taxes and conveyance as per specification all complete as per direction of Engineer-in-charge. Make:HINDWARE/CERA. (As per Model-Matrix Set of Hindware) Matrix set of Hindware
2
129366
64683
Supplying, fitting and fixing of following types CP fittings of approved make and quality confirming to relevant IS specifications with leak proof threaded joints including the cost of all materials, cost of labour, conveyance, taxes, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge. (Make:JAQUAR) Shortbody Bib cock with Wall Flange (As per Cat. No.:KUP-CHR-35079PMof Jaquar)
2
2968
1484
Hand Shower (Health Faucet) with 8mm Dia,1.2 Meter Long Flexible Tube & Wall Hook ALD CHR -573 of JAQUAR
12
24240
2020
15mm dia Angular Stop Cock with wall flange
(As per Jaquar, Cat. No.: KUP-CHR-35053PM)
37
72742
1966
Liquid Soap dispenser with glass bottle
(As per Jaquar, Cat. No.: AKP-CHR-35735P)
21
41559
1979
C.P. Toilet Roll holder with stainless steel flap.. (As per Cat no.ACN-CHR-1153S of Jaquar)
12
14928
1244
Towel Ring Round
(As Per Jaquar,Cat no.:ACN-CHR-1121BN)
11
10747
977
150mmX150mm square trap with 5mm Border
(As per Prayag, Cat. No.: FT-31 M)
28
16268
581
32mm Half Thread Waste Coupling
(As per Jaquar, Cat. No.: ALD-CHR-709)
11
6567
597
32mm Full Thread Waste Coupling
(As per Jaquar, Cat. No.: ALD-CHR-705)
3
1791
597
15mmx450 mm Braided Hose Connection Pipe with both side Nuts & Rubber Washers . (As per Cat. No-805B of Jaquar)
23
10051
437
Extension Piece (15 x 25 mm)
(As per CERA, Cat. No.: F8070301)
43
5891
137
32mm dia C.P. Coat Hook (Double) (As per Cat. No. ACN-CHR-1161N of Jaquar)
12
6756
563
32mm dia CP on Brass Bottle Trap (As per Cat. No. ALD-769L250x190 of Jaquar)
14
22414
1601
Hand Dryer SMART FLOW.(As per Cat no HDR-WHT-M04A of Jaquar)
6
54568
9094.8
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer in charge Cat. No. B3510112 Mirror(Cera)
11
22000
2000
Single Lever Exposed Parts Kit of Hi-flowDiverter Consisting of Operating Lever,Cartridge Sleeve, Wall Flange (withSeals), Button Assembly Sleeve &Button (Compatible with ALD-079N)(As Per Cat. No: Cat. No: KUP-CHR-35079NKPM ofJaquar)
4
16328
4082
Pillar CockCat. No: LYR-CHR-38011 of Jaquar
9
24713
2745.9
Urinal Valve Auto Closing System with Built-in Control Cock & Wall Flange Cat no PRS CHR-077 of Jaquar
3
8982
2994
Bathtub Spout with Wall FlangeCat. No:CHR--SPJ-15429PM of Jaquar
4
8312
2078.1
Concealed Body for Single Lever HighFlow Diverter with Button Assembly,But without Exposed Parts cat no. AL;D -CHR-079n OF Jaquar
4
17720
4430
Overhead Shower ø105mm Round Shape Multi Flow with Air Effect (ABS Body & Face Plate Chrome Plated)with Rubit Cleaning System CAT NO. OHS CHR-1719 OF jaquar
4
19552
4888
Shower Arm 600X25X25mm Square FlangeCat no.-SHA CHR455L600 of jaquar
4
12234
3058.7
Towel Rack 600mm long with Lower Hangers, Stainless Steel AKP CHR-35781PS of jaquar
4
17536
4384
Providing all labour, T&P and machinaries for installation,commissioning of Three phase sensor with level indicator (Drinking & Flushing OHT) and cables etc as per direction of EIC.
1
9908
9908
Supply, installation,testing & commisioning of water cooler cum purifier with chiller in floor of following capacity:60/80 SS including fixing the same on the floor with necessary water connection & waste waste arrengments with all labour, T&P etc.all complete as per the specification & direction of EIC. (As per Model :AG Green pure Chill 80SS of Aquaguard/IONEXCCHANGE) Zero B Storage Cooler cum UV Water Purifier 60/80/120 AquaguardGreen Storage Cooler-cum-Purifier
Model- AG Green Pure Chill 120PSS UV,
2
328790
164395
Labour for drilling a perfectly vertical bore hole for a specified dia for a specified depth below G.L through consolidated and un-consolidated rocks with down the hole hammer drilling rig or combination drilling rig (1200 cfm/ 300 psi) as required to suit the site condition as per the direction of EIC including use of own rigs with its accessories, T&P & consumables etc. for lowering of 200mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/ PVC casing pipes, if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the Tube Well). Labour for drilling of 200mm dia & 150mm dia bore from '0' mtr. to '100' mtr.
100
78020
780.2
Providing & lowering the following size PVC pipes (ASTM) with or without slotted pipes as per the necessity from 1.00m above ground level up to required depth and fitting and fixing up in perfectly vertical position, including cutting, threading pipe and slotted pipe and supplying and fixing all jointing materials, T&P etc. complete and keeping the top of the casing pipe threaded including plugging the tube well to prevent entry of foreign materials from above. The cost inclusive of pipes, fittings, labour, consumables, POL, consumables with hire & running charges of machinaries etc. as per specification & direction of EIC. Lowering of 200mm (8'') dia PVC plastic pipes Sch-80 as per ASTM-D-1785/2004 upto required depth.
51
109446
2146
Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment , labour, all consumables, running & hire charges of machinaries etc. all complete as per the direction of the EIC.
1
6635
6635
Supplying all materials, labour & tools and plant and grouting with cement slurry for sanitary sealing around the GI/PVC casing pipe up to 3mtrs below ground level to plug the bore hole including cost of cement all complete as per specification & direction of the Engineer-in-Charge.
10
4402
440.2
Providing all materials required for construction of brick masonry chamber for encasing the production well with Fly Ash bricks of size 25cm x 12cm x 8cm having crushing strength not less than 75Kg/Sqcm in C.M (1:4), PCC 1:3:6 with 40mm size hard granite crusher broken metal of 150mm thick on base & 100mm thick on top of the chamber, encasing the annular area of casing pipe with cement concrete 1:2:4 of minimum size 450mmx450mmx1200mm height including form work, filling the inside cavity with sand, C.C. 1:2:4 on top of the chamber of 50mm thick, 12mm thick cement plaster 1:4 on outer wall & top surface, earth work excavation in all kinds of soil/rock including back filling with selected excavated earth duly watered & rammed with smooth finishing. The height of chamber should be 450mm from G.L. The cost inclusive of all materials, labour, T&P etc. complete as per specification & direction of Engineer-in-charge. Outer size 1400mm x 1400mm x 1200mm ht. chambers
1
14849
14849
Supply, Installation, testing & commissioning of 3-phase, 50Hz Submersible pump set of required head 75mtr & discharge 5 Lps including HDPE delivery pipes of 10 Kgf/cm2 of material grade P.E.-80,S.S Tapper(Two nos each) of 0-.45 mtr Long,MS Supporting Clamp with MS Nuts and Bolts alongwith 200 mm dia Tube-well cover and cap suitable for above Pump-set and Suitable size of Four core flat cable of 120 mtr with Bore bunched copper conductor insulated sheathed with PVC for Submersible Motor with voltage grade up to 415 Volt ,along-with 2 nos. of earthing 7.5 KW and 10 Hp confirming to IS-694/1990 of required length, control panel Star Delta with APFC and ATS arrangement & required accessories suitable for 200x150mm size Production Well ,control panel with Sensor arrangement to run the motor automatically according to Level of Raw Water Sump i.e 50% of Volume& required accessories suitable for 200x150mm size Production Well etc all complete as per specification & direction of EIC. Make:-Texmo/Crompton Greaves/Willo/Lubi/Kirloskar or Equivalent 1ests
1
54689
54689.4
Supplying and Fixing of Sintex Triple Layer White (ISI Marked) over head water storage tank with following capacities conforming to IS : 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto required elevation and placing the tank to the required position etc all complete as per direction of Engineer-in-Charge.(Make -Sintex) 5000 Litres Capacity Triple Layer white Tank for Drinking& Flushing & Fire Fighting
2
110401
55200.7
Providing all materials, labour, T&P for fitting and fixing of standard size Toilet Cubicle of approved make in all toilets (Make:Merino/Greenlam)
14
672000
48000
Fresh Colour Restroom Cubicles Systems, FMRSCUBTTN12BX00002 (HSN CODE: 48239019), BESCO TITAN 12 BOXUP CUBICLE 2100MM, Thickness of Compact Laminate : 12 mm,Colour of HPL Boards: Single Colour, Size of Cubicle : As per Drawing (W) X1550mm (D) X 2100mm (H),Door Size : 1925mm (H) x 600mm (W), Divider Size : 1945mm (H), Overall Height Of Cubicle : 2100mm
(Including bottom Gap of 100mm), Accessories: Standard – Merino Make Stainless Steel - 304 Grade accessories) , a) SS “U” Channel,b) SS “F” channel
c) SS Door Stopper Channell
c) SS Top Rail
d) SS Coat Hook e) SS Privacy Thumb turn c/w Occupancy
Indicator f) SS Door Knob
g) SS Hinges with Cover
h) SS Shoe Box Leg 12mm - 316 Grade
i) Rubber Lining for Groove
j) S.S.Screws 304 G & P.V.C Wall Plugs SPECIAL NOTE - Warpage Criteria is 3.0
mm/1000mm for MRS panels as per EN
standard- 438. Providing all materials, labour, T&P for fitting and fixing of standard size Urinal Partition of approved make in all toilets (Make:Merino/Greenlam)
2
13000
6500
External (P.H.) Providing all material, labour, T&P and construction of Gully Trap chamber of size as mentioned below with 250mm nominal size flyash Brick having crushing strength not less than 75kg/sqcm in CM 1:4 over a bed of 100mm thick C.C. (1:3:6) using 40mm size HG metal, plastering with 12mm thick cement plaster with cement punning in cement mortar 1:4 on inner surface and 12mm thick cement plaster in cement mortar (1:4) on external surface,fitting & fixing of 110mm square PVC Gully Trap with grating and pre-cast factory made (SFRC) cover with frame of opening size 260mmx260mm, moulding and shaping the channel & benching with C.C (1:2:4) with hard granite chips 12mm size,earth work excavation in all kinds of soil & rock and filling the cavity of the chamber with excavated & selected earth levelling the surface around the chamber with disposal of surplus earth within 50mt lead as per specification, design & drawing including cost of curing and all taxes, royality, cost, conveyance etc. all complete as per specification & direction of EIC. 300mm x 300mm x upto 450mm deep gully trap.
4
10936
2734
Providing all materials, labour T&P for construction of inspection chamber with Fly Ash bricks of size 25cm x 12cm x 8cm having crushing strength not less than 75Kg/Sqcm in C.M (1:4), PCC 1:3:6 with 40mm size hard granite crusher broken metal of 150mm thick, 12mm thick cement plaster 1:3 both in outer & inner surface of the wall & bottom, earth work excavation in all kinds of soil/rock including back filling with selected excavated earth duly watered & rammed. RCC M-20 with 20mm & down size H.G crusher broken chips having minimum cube strength 200Kg/Sqcm at 28 days confirming to IS-453/76 & IS-3370 for roof slab of 125mm average thick with form work as per the requied size including cost for MS reinforcement as per approved design & drawing & fixing of CI manhole cover with frame (100 kg) for opening of 600x600mm including cost of all materials, labour, T&P etc. complete as per specification & direction of Engineer-in-charge. Inner size 750mm x 750mm x 500mm depth.
14
293510
20965
Providing all materials, labour, T&P required for construction of RCC M-25 man hole chamber of following sizes having cube strength 250 Kg/cm2 at 28 days confirming to IS-456/2000 & IS-3370 at all locations & height using h.g. stone aggregate (Crusher broken) of 20mm & down size including machine mixing, lifting, hoisting, conveying, placing in position, mechanical consolidation, curing, de-watering (if required). The minimum thickness of RCC base slab, all side walls & roof slab shall be not less than 150mm, 150mm & 125mm (avg.) respectively. The cost shall be inclusive of rigid, levelled & plumbed centering & shuttering to required slope, allignment & size for all kinds of RCC work with steel/ ply centering materials with all bracing, ties, anchorage & supports and removing the same after required paid & placing M.S.Reinforcement HYSD bar of required dia including cutting, bending, straightening of approved quality as per approved design & drawing & tying the grills for RCC works & placing in position using binding wires (18 to 20 gauge soft drawn & cold annealed). PCC 1:3:6 with 40mm size h.g.c.b. metal of 100mm thick, moulding & shaping the channel & benching with C.C. 1:2:4 with 12mm size h.g.c.b. chips, 12mm thick cement plaster 1:3 with cement punning on inner wall surface, earth work excavation in all types of soil/rock including cement concrete cutting as per site condition, filling the foundation base with sand duly watered & rammed, providing, fitting & fixing of pre-cast factory made man hole cover with frame ( heavy duty) for clear opening 560mm dia, providing, fitting & fixing of poly propylene steel reinforced man hole steps of approved quality & size in two parallel line of 300mm spacing in vertical wall with centre to centre 375mm (staggered) etc.all complete as per specification & direction of EIC. Manhole chamber of Inner size 800mmx900mmx 600mm depth.
9
386064
42896
Extra for every additional depth of 0.10mtr. or part there of manhole size 800mmx900mm from 600mm depth upto 1500mm depth.
2
34014
17007
Supplying all materials, labour, T&P, fitting and fixing uPVC SWR pipes (Type-B) of approved make confirming to IS-13592/1992, both below & above ground level or fixing on wall surface in all floors including all taxes, duties, transportation & scaffolding etc. all complete as per specification & direction of the Engineer-in-charge. Make: ASTRAL/ASHRIVAD/AJAYA/AKG/SUPREME. 110mm dia soil pipe
24
23952
998
110mm dia waste pipe
83
82834
998
Supplying all materials, labour, T&P, fitting and fixing of following dia uPVC SWR (Ringfit) fittings of approved make confirming to IS-14735 in all floor with all taxes, duties, transportation & requisite testing as per specification & direction of EIC.Make:ASTRAL/ASHRIVAD/AJAYA/AKG/SUPREME. 110mm Pushfit Coupler
84
14196
169
110mm x110mm P-Trap
28
15988
571
110mmx87.5º bend
8
2368
296
110mmx87.5º door bend
8
2864
358
110mmx45º bend
67
16482
246
110mm dia Single Tee
43
18189
423
110mm dia Single 'Y'
42
21126
503
110mm dia Single 'Y' with Door
8
4936
617
110mm dia Double 'Y'
13
9113
701
110mm WC connector straight with lip ring
12
3960
330
PVC Clamp Suitable for 110mm dia pipe
12
1032
86
110mm dia Vent cowl
8
512
64
110mm Socket plug
25
2425
97
Earth work in all kinds of soil within 50m initial lead & 1.5m initial lift including dressing, levelling & breaking clods to maximum 5cm to 7cm & laying in layers not exceeding 0.3m in depth & as per specification & direction of Department.
75.6
17252
228.21
Filling foundation trenches and Plinth with excavated & selected earth, laying in layers not exceeding 23cm thick well watered & rammed etc. complete including labour , T&P, lead & lift cost & conveyance, loading, unloading etc. complete as per specification & direction of EIC.
71.2
9026
126.78
Providing and laying in trench cement concrete ( 1:3:6 ) with 40mm size hard granite metal in the following type of beddingand hunching for RCC NP3Spigot socket concrete pipes of the following internal diameter including curing complete as per specification & direction of E-i-c. For 150mm dia pipe
140
105322
752.3
Providing all materials, labour, T&P and laying of Centrifugally cast (spun) RCC non pressure pipes of class NP3 with socket & spigot ends confirming to IS-458 with ISI mark in standard lengths suitable for push on joints including lowering the pipes in to trenches to required depth below G.L, with proper allignment & gradient, testing, commissioning, de-watering (if required) including rubber gasket as per IS-5382/1985 with ISI mark with all taxes & duties etc. all complete as per specification & direction of EIC. (Excluding cost for earth wok, back filling which will be paid separately). 150mm (NB) dia NP 3 RCC S/S pipe
140
152320
1088
Supplying all materials, labour, T&P, fitting and fixing uPVC SWR pipes (Type-A) For rain water Stacking pipe in the Duct(Co-moulded Ring type) of approved make confirming to IS-13592/1992with ISI marked, both below & above ground level or fixing on wall surface in all floors including all taxes, duties, transportation & scaffolding etc. all complete as per specification & direction of the Engineer-in-charge. Make: ASTRAL/ASHIRVAD/AJAY. 160mm dia Bend (87.5 degree)
6
3822
637
160mm dia pushfit coupler
12
6384
532
160mm dia pipe
76
106628
1403
160mm dia Bend (87.5 degree) Door bend
6
4110
685
Vertical Grating 150x150mm for Rain water gutter on terrace ,opening to 160mm dia Rain water pipes
6
2154
359
Earth work in all kinds of soil within 50m initial lead & 1.5m initial lift including dressing, levelling & breaking clods to maximum 5cm to 7cm & laying in layers not exceeding 0.3m in depth & as per specification & direction of Department. Upto 1.50m initial lift
30
6846
228.21
From 1.50m to 3.00m lift
46
14278
310.41
Filling foundation trenches and Plinth with excavated & selected earth, laying in layers not exceeding 23cm thick well watered & rammed etc. complete including labour , T&P, lead & lift cost & conveyance, loading, unloading etc. complete as per specification & direction of EIC.
24.9
3156
126.78
Filling the pipe line trenches with sand including watering & ramming etc. complete including all labour, T&P, cost of sand, conveyance, taxes, royality, loading & unloading as per specification & direction of EIC.
2
1820
910.1
Providing and laying plain cement concrete (1:3:6) in foundation and bottom layers using 40mm size hard black crusher broken granite metal of approved quality and size from approved quarry including cost, conveyance, royality, all taxes complete and providing all labour T&P for machine mixing, lowering, laying and compacting to proper thickness, watering and curing for the required period and including dewatering (if required) as per the specification & direction of Engineer-in-charge.
3.4
19333
5686.4
Providing and laying cement concrete M15 in foundation and bottom layers using 12mm size hard black crusher broken granite chips of approved quality and size from approved quarry including cost, conveyance, royality, all taxes complete and providing all labour T&P for machine mixing, lowering, laying and compacting to proper thickness, watering and curing for the required period and including dewatering (if required) as per the specification & direction of Engineer-in-charge.
0.6
3256
5427
Providing all materials, labour, T&P for laying R.C.C. M-15 having minimum cube strength of 150 Kg/cm2 at 28 days confirming to IS 456/79 & IS 3370 for water tank at all location & height using graded H.G stone aggregate of 20mm & down size including machine mixing, lifting, conveying, placing in position mechanical consolidation curing, dewatering (if necessary) & testing the concrete for water tightness, rectification of defects if any etc., complete all as per specification & drawing including cost of all material, labour, machinery hire charges, T&P and all testing charges (but excluding cost of reinforcement bars, binding wirings, centering & shuttering etc.) as per the specification & direction of Engineer-in-charge.
12.2
66209
5427
Providing & making strong, rigid, levelled & plumbed centering & shuttering to required shape, allignment & size for all kinds of RCC works with wooden or steel centering materials with all bracing, ties, anchorage & supports including provision for necessary holes for P.H. works including cost of nails etc. complete & dismantling & removing the same after required interval from the date of casting including cost of all materials with transportation, hire charges, taxes, loading, unloading all labour, T&P, sundries etc. complete as per the specification & direction of the Engineer-in-charge.
101.2
41967
414.7
Cutting, bending, binding, straightening HYSD bars of required diameter of approved quality as per approved design & drawing & tying the grill for RCC works & placing in position using binding wire (18 to 20 gauge, soft drawn & cold annealed) including cost of all labour, material, sundries, T&P, scaffolding etc. all complete as per the specification & the direction of Engineer-in-charge.
11.6
103097
8887.7
Providing plaster with cement mortar including cement punning/ bitumen painting where required finished smooth over brick work with waterproofing cement based compound of approved quality including finishing smooth to proper slope and plane including cost of all materials with conveyance, royalty, taxes, watering, scaffolding and curing, all labour and T&P etc. complete as per specification & direction of EIC. 12mm thick C.P. 1:3 with punning
47.9
9441
197.1
Providing, fitting & fixing of following sizes of precast factory made RCC man hole cover with frame including locking arrangement. The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC. 560 mm dia clear opening CI man hole cover with frame.(As per Jawaswal Neco Industries 560 mm dia Cover with Frame 128 Kg(SF)or equivalant
4
46892
11723
Providing, fitting & fixing of Poly Propylene man hole steps of approved quality & size in two parallel line of 300mm spacing in vertical walls with centre to centre 375mm (staggered).The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC.
48
12528
261
Providing, fitting & fixing of 110 diax1.80m long UPVC SWR pipe (Type-B) of approved make confirming to IS-13592/1992 with Vent Cowl including construction of cement concrete pedestal (1:2:4) of size 0.30mx0.30mx0.45m ht. The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC.
2
1884
942
Providing, fitting & fixing of 110mm dia S.W.R Tee. The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC.
2
846
423
Providing all labour, T&P for benching & making Channel for inlet & outlet chamber.
1
200
200
Earth work in all kinds of soil within 50m initial lead & 1.5m initial lift including dressing, levelling & breaking clods to maximum 5cm to 7cm & laying in layers not exceeding 0.3m in depth & as per specification & direction of Department. Upto 1.50m initial lift
9.9
2259
228.21
From 1.50m to 3.00m lift
8.9
2762
310.41
Filling foundation trenches and Plinth with excavated & selected earth, laying in layers not exceeding 23cm thick well watered & rammed etc. complete including labour , T&P, lead & lift cost & conveyance, loading, unloading etc. complete as per specification & direction of EIC.
3.5
443
126.78
Providing all material, labour & T&P for filling the both inner & outer surface of soak pit with 40mm size hard granite hand broken metal etc. complete including lead & lift cost & conveyance, loading, unloading etc. complete as per specification & direction of EIC.
8.9
16224
1823
Filling the foundation trenches with sand including watering & ramming etc. complete including all labour, T&P, cost of sand, conveyance, taxes, royality, loading & unloading as per specification & direction of EIC.
0.1
91
910.1
Providing and laying plain cement concrete (1:3:6) in foundation and bottom layers using 40mm size hard black crusher broken granite metal of approved quality and size from approved quarry including cost, conveyance, royality, all taxes complete and providing all labour T&P for machine mixing, lowering, laying and compacting to proper thickness, watering and curing for the required period and including dewatering (if required) as per the specification & direction of Engineer-in-charge.
0.25
1421
5686.4
Providing all material, labour, T&P for Fly ash Brick masonry work using Fly ash of 25cm X 12 cm X 8 cm size having crushing strength not less than 75Kg/Sqcm. in cement mortar (1:4) including cost, conveyance, taxes, royalties, loading and unloading of all materials and labour and scaffolding, watering, curing T&P etc., complete as per the specification & direction of the Engineer-in-charge. Foundation & Plinth
1.8
7739
4299.9
Providing all material, labour, T&P for using Dry Fly ash Brick of 25cm X 12 cm X 8 cm size having crushing strength not less than 75Kg/Sqcm. including cost, conveyance, taxes, royalties, loading and unloading of all materials and labour and scaffolding, watering, curing T&P etc., complete as per the specification & direction of the Engineer-in-charge. Foundation & Plinth
2.2
7621
3464.3
Providing all materials, labour, T&P for laying R.C.C. M-20 having minimum cube strength of 200 Kg/cm2 at 28 days confirming to IS 456/79 & IS 3370 for water tank at all location & height using graded H.G stone aggregate of 20mm & down size including machine mixing, lifting, conveying, placing in position mechanical consolidation curing, dewatering (if necessary) & testing the concrete for water tightness, rectification of defects if any etc., complete all as per specification & drawing including cost of all material, labour, machinery hire charges, T&P and all testing charges (but excluding cost of reinforcement bars, binding wirings, centering & shuttering etc.) as per the specification & direction of Engineer-in-charge.
0.3
1731
5771.5
Providing & making strong, rigid, levelled & plumbed centering & shuttering to required shape, allignment & size for all kinds of RCC works with wooden or steel centering materials with all bracing, ties, anchorage & supports including provision for necessary holes for P.H. works including cost of nails etc. complete & dismantling & removing the same after required interval from the date of casting including cost of all materials with transportation, hire charges, taxes, loading, unloading all labour, T&P, sundries etc. complete as per the specification & direction of the Engineer-in-charge.
2.3
953
414.7
Cutting, bending, binding, straightening HYSD bars of required diameter of approved quality as per approved design & drawing & tying the grill for RCC works & placing in position using binding wire (18 to 20 gauge, soft drawn & cold annealed) including cost of all labour, material, sundries, T&P, scaffolding etc. all complete as per the specification & the direction of Engineer-in-charge.
0.3
2666
8887.7
Providing plaster with cement mortar including cement punning/ bitumen painting where required finished smooth over brick work with waterproofing cement based compound of approved quality including finishing smooth to proper slope and plane including cost of all materials with conveyance, royalty, taxes, watering, scaffolding and curing, all labour and T&P etc. complete as per specification & direction of EIC. 12mm thick C.P. 1:4
8.2
1205
147
12mm thick C.P. 1:4 with punning
6.1
1045
171.4
12mm thick C.P. 1:4 with punning and bitumen painting over wall top.
1.4
309
220.8
Providing, fitting & fixing of following sizes of CI man hole cover with frame including locking arrangement. The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC. 560 mm dia clear opening CI man hole cover with frame.(As per Jawaswal Neco Industries 560 mm dia Cover with Frame 128 Kg(SF)/equivalent
1
11723
11723
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements