Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 4,14,200Document Cost
₹ 10,000Tender Fee
Refer Documents
Summary
Repair And Rehabilitation Of 08 Nos. Of Bridges At Different Locations Under Ganjam (randb) Division No.ii,
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_EICCL_105151_2Tender No
CCE, SC-(RandB)-BAM-03/2024-25Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
50mm thick
382.75
54055
141.23
Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge.
711.67
190827
268.14
Dismantling of Prestressed / Reinforced cement concrete grade M-20 & above including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres
8.33
14582
1750.65
Supplying, Fitting, Fixing and Placing in position Strip Seal Expansion Joints including cost, conveyance of all materials & cost of all labour etc complete as per approved Drawing & Technical Specifications and Clause-2606 of MoRT&H Specifications for Road & Bridge works (5th Revision)
25.5
361896
14192.01
Providing, mixing and applying bonding coat of approved adhesive on chippedportion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.Epoxy bonding of new concrete to old concrete
738.07
313177
424.32
Construction of RCC railing of M30 Grade in-situ with 20mm nominal size aggregate size true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications
37
83106
2246.12
R.C.C. M-40 grade including cost of all materials, cost of labour, machinery, T&P charges for suspended type staging / centering & shuttering suported on girders with MS bracket arrangement for cantilever portion as per approved Drawing & Technical Specifications and as per Section -1500, 1700 & 2300 of MoRT&H Specifications for Road & Bridge works (5th Revision)
-
-
-
Approach Slab
5
35871
7174.34
Providing HYSD reinforcement for RCC works including bending, binding & placing in position as per Drawing including cost, conveyance of all materials, all labour and T&P etc complete.
5
43827
8765.56
Providing and fixing drainge spouts complete as per IRC:SP-42 with 150 mm dia PVC pipe and downtake length 1m as per engineer-in-charge.
8
8304
1038.1
Providing and applying of anticorrosive treatment to exposed structural reinforcement by two coats of IPNET RB or equivalent with time interval of minimum 8 -10 hours between each coat after the application of two coats of alkaline rust converting primer. The application shall be done by brush or spray after cleaning existing reinforcement with wire / rotary wire brush to make the surfaces free from loose material, dirt, traces of corrosion etc. and throughly washing with water and allowing it to dry inclusive of all labour, materials, equipment etc. complete in all respect as per specifications and instructions of Engineer in Charge.
738.07
462924
627.21
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.
-
-
-
Bar upto 12mm dia:-
1005
5728
5.7
Bar Above 12mm dia:-
502
5712
11.38
Guniting concrete surface with cement mortar applied with compressor after cleaning surface and spraying with epoxy complete as per Technical specification etc. complete as per direction of Engineer-In-Charge.
344.1
372003
1081.09
Providing and inserting 12mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diameter (20mm to 30mm) uptodepth 150 mm at required spacing making the hole & cracks dust free by blowing compressed air , sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of Engineer-in-charge.
75
12853
171.38
Providing and injecting grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete / masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-charge. (The Payment shall be made on the basis of actual weight of approved grout injected)
75
33658
448.78
Supply, mixing and placement of ready to use non shrink, cementitious free flow micro-concrete SikaRep® Microcrete-4 of 50 mm thickness as per specification, as per recommendation & as per the direction of engineer in charge. The rate inclusive all sorts of material, labours, tools & tackels complete
1.99
117761
59176.61
Applying pre-packed cement based polymer mortar of strength 45 Mpa at 28 days for replacement of spalled concrete
49.5
10107
204.19
Cleaning and gurbbing road land including uprooting rank vegetation, grass, bushes, shrubs, sapling and trees girth up to 300mm, removal of stumps of trees cut earlier and desposal of unservicable materials and stacking of servicable materials to be used or auctioned, up to lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness. (in area of light jungle)
2880
23702
8.23
Providing & erecting Retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity gradse sheeting vide clause 801.3 fixed over aluminium sheeting 2mm thick supported on a mild steel angle iron post 75mm x 75mm x 6mm, 2 nos firmely fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm x 45cm x 60cm, 60 cm below ground level as per approved design.
-
-
-
90 cm equilateral triangle
2
11601
5800.79
Providing and fixing of bi-directional retro reflactive raised pavement markers of approved colour, quality and made conforming to ASTM D-4280 made from injection moulded high impact polymer including cleaning, preparation of surface and fixing at position with approved quality adhesives including cost of all material, labour, transportation, taxes, duties, sundries, T&P etc complete.
100
28200
282
Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
33.3
9278
278.63
Repair and Renovation of Bridge of Patabhati Nallah on Chatrapur Tanganapali Road at Chainage 6.791 Km
-
-
-
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge
-
-
-
75mm thick
211.8
44156
208.48
50mm thick
251.8
35561
141.23
Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge.
463.6
119418
257.59
Providing, mixing and applying bonding coat of approved adhesive on chippedportion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.Epoxy bonding of new concrete to old concrete
493.6
209444
424.32
R.C.C. M-40 grade including cost of all materials, cost of labour, machinery, T&P charges for suspended type staging / centering & shuttering suported on girders with MS bracket arrangement for cantilever portion as per approved Drawing & Technical Specifications and as per Section -1500, 1700 & 2300 of MoRT&H Specifications for Road & Bridge works (5th Revision)
-
-
-
Railing
12.03
164177
13647.38
Providing HYSD reinforcement for RCC works including bending, binding & placing in position as per Drawing including cost, conveyance of all materials, all labour and T&P etc complete.
82.59
723947
8765.56
Supplying, Fitting, Fixing and Placing in position Strip Seal Expansion Joints including cost, conveyance of all materials & cost of all labour etc complete as per approved Drawing & Technical Specifications and Clause-2606 of MoRT&H Specifications for Road & Bridge works (5th Revision)
25.5
361896
14192.01
Providing, Fitting & Fixing of Drainage Spouts in Deck slab as per approved Drawing & Technical Specifications and Section 2700 of MoRT&H Specifications for Road & Bridge works (5th Revision).
8
8304
1038.1
Providing and applying of anticorrosive treatment to exposed structural reinforcement by two coats of IPNET RB or equivalent with time interval of minimum 8 -10 hours between each coat after the application of two coats of alkaline rust converting primer. The application shall be done by brush or spray after cleaning existing reinforcement with wire / rotary wire brush to make the surfaces free from loose material, dirt, traces of corrosion etc. and throughly washing with water and allowing it to dry inclusive of all labour, materials, equipment etc. complete in all respect as per specifications and instructions of Engineer in Charge.
493.6
309590
627.21
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.
-
-
-
Bar Upto 12mm dia:-
500
2850
5.7
Bar Above 12mm dia:-
500.5
5695
11.38
Guniting concrete surface with cement mortar applied with compressor after cleaning surface and spraying with epoxy complete as per Technical specification etc. complete as per direction of Engineer-In-Charge.
423.5
456507
1077.94
Applying pre-packed cement based polymer mortar of strength 45 Mpa at 28 days for replacement of spalled concrete
100
20419
204.19
Cleaning and gurbbing road land including uprooting rank vegetation, grass, bushes, shrubs, sapling and trees girth up to 300mm, removal of stumps of trees cut earlier and desposal of unservicable materials and stacking of servicable materials to be used or auctioned, up to lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness. (in area of light jungle)
3000
24690
8.23
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work. by Manual Means (Depth upto 3 m)
71.4
6589
92.29
Filling foundation with sand including watering & ramming with cost, conveyance, royality of sand & labour charges etc. complete.
7.14
10434
1461.37
PCC M-15 Grade using 40 to 10mm size crushed stone aggregates mixed by concrete mixer, laying with all leads and lifts & compacting as per approved Drawing & Technical Specifications and Section - 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision).
-
-
-
Foundation
7.14
41590
5825.02
RCC M-25 grade in retaining wall with formwork using 20 to 10mm size crushed stone aggregates mixed by concrete mixer, laying with all leads and lifts & compacting as per approved Drawing & Technical Specifications and Section - 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision).
-
-
-
Superstructure
50.4
483187
9587.05
Rough stone dry packing on Approns and Revetments with hard granite stone 30cm and above size including cost,conveyance royality of all materials and labour charges etc.complete.
51
112503
2205.95
Providing & erecting Retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity gradse sheeting vide clause 801.3 fixed over aluminium sheeting 2mm thick supported on a mild steel angle iron post 75mm x 75mm x 6mm, 2 nos firmely fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm x 45cm x 60cm, 60 cm below ground level as per approved design.
-
-
-
90 cm equilateral triangle
2
11658
5829.16
Providing and fixing of bi-directional retro reflactive raised pavement markers of approved colour, quality and made conforming to ASTM D-4280 made from injection moulded high impact polymer including cleaning, preparation of surface and fixing at position with approved quality adhesives including cost of all material, labour, transportation, taxes, duties, sundries, T&P etc complete.
100
28200
282
Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
33.3
9278
278.63
Repair & Renovation of Bridge over Chandi Nallah on Khalikote Boirani Road at 16.037km0Km
-
-
-
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge
-
-
-
75mm thick
45
9381
208.48
Construction of RCC railing of M30 Grade in-situ with 20mm nominal size aggregate size true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications
9
20030
2225.66
Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
33.3
9278
278.63
Providing, Fitting & Fixing of Drainage Spouts in Deck slab as per approved Drawing & Technical Specifications and Section 2700 of MoRT&H Specifications for Road & Bridge works (5th Revision).
8
8304
1038.1
Providing and fixing of bi-directional retro reflactive raised pavement markers of approved colour, quality and made conforming to ASTM D-4280 made from injection moulded high impact polymer including cleaning, preparation of surface and fixing at position with approved quality adhesives including cost of all material, labour, transportation, taxes, duties, sundries, T&P etc complete.
50
14100
282
Providing and applying of anticorrosive treatment to exposed structural reinforcement by two coats of IPNET RB or equivalent with time interval of minimum 8 -10 hours between each coat after the application of two coats of alkaline rust converting primer. The application shall be done by brush or spray after cleaning existing reinforcement with wire / rotary wire brush to make the surfaces free from loose material, dirt, traces of corrosion etc. and throughly washing with water and allowing it to dry inclusive of all labour, materials, equipment etc. complete in all respect as per specifications and instructions of Engineer in Charge.
53.8
33743
627.21
Providing and painting of Anticorrosive paint on exposed surface of superstructures and complete as per specifications and manufacture's ecomendation by approved supplier as per the direction of Engineer-in-Charge.
415.84
132823
319.41
Dismantling of cement concrete grade M15 & M20 including T & P & scaffolding wherever necessary , sorting the dismantled material , disposal of unservicable material with all lifts & lead of 1000 mtr
54
34322
635.61
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.
-
-
-
Bar Above 12mm dia:-
84
955
11.38
Guniting concrete surface with cement mortar applied with compressor after cleaning surface and spraying with epoxy complete as per Technical specification etc. complete as per direction of Engineer-In-Charge.
38.4
41534
1081.62
Patching of damaged concrete surface with polymer concrete and curing compounds, initiator and promoter, available in present formulations, to be applied as per instructions of manufacturer and as approved by the Engineer.
2.43
3170
1304.72
Painting two coats after filling the surface with Synthetic enamel paint in all shades on new plastred concrete surface etc complete
32.4
2673
82.53
Providing and inserting 12mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diameter (20mm to 30mm) uptodepth 150 mm at required spacing making the hole & cracks dust free by blowing compressed air , sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of Engineer-in-charge.
100
17138
171.38
Providing and injecting grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete / masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-charge. (The Payment shall be made on the basis of actual weight of approved grout injected)
100
44878
448.78
Providing & erecting Retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity gradse sheeting vide clause 801.3 fixed over aluminium sheeting 2mm thick supported on a mild steel angle iron post 75mm x 75mm x 6mm, 2 nos firmely fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm x 45cm x 60cm, 60 cm below ground level as per approved design.
-
-
-
90 cm equilateral triangle
4
23141
5785.42
Applying pre-packed cement based polymer mortar of strength 45 Mpa at 28 days for replacement of spalled concrete
115.75
23634
204.19
Cleaning and gurbbing road land including uprooting rank vegetation, grass, bushes, shrubs, sapling and trees girth up to 300mm, removal of stumps of trees cut earlier and desposal of unservicable materials and stacking of servicable materials to be used or auctioned, up to lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness. (in area of light jungle)
1440
11851
8.23
Rough stone dry packing on Approns and Revetments with hard granite stone 30cm and above size including cost,conveyance royality of all materials and labour charges etc.complete.
28.81
52871
1835.18
Drilling suitable holes in reinforced or plain concrete with power driven drill machine to a minimum depth of 100 mm to 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-in-charge.
-
-
-
Upto and including 12mm dia
15
1221
81.42
Upto and including 16mm dia
15
2052
136.82
Supply, mixing and placement of ready to use non shrink, cementitious free flow micro-concrete SikaRep® Microcrete-4 of 50 mm thickness as per specification, as per recommendation & as per the direction of engineer in charge. The rate inclusive all sorts of material, labours, tools & tackels complete
21.6
1278214
59176.61
Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge.
Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this
item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).
48
35416
737.85
Repair & Renovation of Bridge over Kharkhari Nallah on Huma Boirani Road at 17.631Km
-
-
-
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge
-
-
-
75mm thick
360
75052
208.48
50mm thick
224
31635
141.23
Dismantling of Prestressed / Reinforced cement concrete grade M-20 & above including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres
39.42
69010
1750.65
Providing, mixing and applying bonding coat of approved adhesive on chippedportion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.Epoxy bonding of new concrete to old concrete
584
247802
424.32
R.C.C. M-40 grade including cost of all materials, cost of labour, machinery, T&P charges for suspended type staging / centering & shuttering suported on girders with MS bracket arrangement for cantilever portion as per approved Drawing & Technical Specifications and as per Section -1500, 1700 & 2300 of MoRT&H Specifications for Road & Bridge works (5th Revision)
-
-
-
Railing
9
118024
13113.8
Approach Slab
18
123935
6885.29
Construction of RCC railing of M30 Grade in-situ with 20mm nominal size aggregate size true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications
30
66078
2202.62
Providing HYSD reinforcement for RCC works including bending, binding & placing in position as per Drawing including cost, conveyance of all materials, all labour and T&P etc complete.
215.16
1885997
8765.56
Supplying, Fitting, Fixing and Placing in position Strip Seal Expansion Joints including cost, conveyance of all materials & cost of all labour etc complete as per approved Drawing & Technical Specifications and Clause-2606 of MoRT&H Specifications for Road & Bridge works (5th Revision)
40
567680
14192.01
Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
33.3
9278
278.63
Providing, Fitting & Fixing of Drainage Spouts in Deck slab as per approved Drawing & Technical Specifications and Section 2700 of MoRT&H Specifications for Road & Bridge works (5th Revision).
16
16609
1038.1
Providing and fixing of bi-directional retro reflactive raised pavement markers of approved colour, quality and made conforming to ASTM D-4280 made from injection moulded high impact polymer including cleaning, preparation of surface and fixing at position with approved quality adhesives including cost of all material, labour, transportation, taxes, duties, sundries, T&P etc complete.
100
28200
282
Providing and applying of anticorrosive treatment to exposed structural reinforcement by two coats of IPNET RB or equivalent with time interval of minimum 8 -10 hours between each coat after the application of two coats of alkaline rust converting primer. The application shall be done by brush or spray after cleaning existing reinforcement with wire / rotary wire brush to make the surfaces free from loose material, dirt, traces of corrosion etc. and throughly washing with water and allowing it to dry inclusive of all labour, materials, equipment etc. complete in all respect as per specifications and instructions of Engineer in Charge.
592.8
371810
627.21
Providing and painting of Anticorrosive paint on exposed surface of superstructures and complete as per specifications and manufacture's ecomendation by approved supplier as per the direction of Engineer-in-Charge.
415.84
132823
319.41
Dismantling of cement concrete grade M15 & M20 including T & P & scaffolding wherever necessary , sorting the dismantled material , disposal of unservicable material with all lifts & lead of 1000 mtr
54
34322
635.61
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.
-
-
-
Bar Above 12mm dia:-
84
955
11.38
Guniting concrete surface with cement mortar applied with compressor after cleaning surface and spraying with epoxy complete as per Technical specification etc. complete as per direction of Engineer-In-Charge.
300.9
321186
1067.42
Patching of damaged concrete surface with polymer concrete and curing compounds, initiator and promoter, available in present formulations, to be applied as per instructions of manufacturer and as approved by the Engineer.
1.22
1591
1304.72
Painting two coats after filling the surface with Synthetic enamel paint in all shades on new plastred concrete surface etc complete
32.4
2673
82.53
Providing and inserting 12mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diameter (20mm to 30mm) uptodepth 150 mm at required spacing making the hole & cracks dust free by blowing compressed air , sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of Engineer-in-charge.
100
17138
171.38
Providing and injecting grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete / masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-charge. (The Payment shall be made on the basis of actual weight of approved grout injected)
100
44878
448.78
Providing & erecting Retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity gradse sheeting vide clause 801.3 fixed over aluminium sheeting 2mm thick supported on a mild steel angle iron post 75mm x 75mm x 6mm, 2 nos firmely fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm x 45cm x 60cm, 60 cm below ground level as per approved design.
-
-
-
90 cm equilateral triangle
4
23003
5750.89
Applying pre-packed cement based polymer mortar of strength 45 Mpa at 28 days for replacement of spalled concrete
190
38796
204.19
Cleaning and gurbbing road land including uprooting rank vegetation, grass, bushes, shrubs, sapling and trees girth up to 300mm, removal of stumps of trees cut earlier and desposal of unservicable materials and stacking of servicable materials to be used or auctioned, up to lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness. (in area of light jungle)
1440
11851
8.23
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work. by Manual Means (Depth upto 3 m)
144
13292
92.31
Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per direction by the Engineer in charge.
14.4
17256
1198.37
PCC M-15 Grade using 40 to 10mm size crushed stone aggregates mixed by concrete mixer, laying with all leads and lifts & compacting as per approved Drawing & Technical Specifications and Section - 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision).
-
-
-
Foundation
14.4
78138
5426.28
RCC M-25 grade in retaining wall with formwork using 20 to 10mm size crushed stone aggregates mixed by concrete mixer, laying with all leads and lifts & compacting as per approved Drawing & Technical Specifications and Section - 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision).
-
-
-
Superstructure
134.4
1074498
7994.78
Rough stone dry packing on Approns and Revetments with hard granite stone 30cm and above size including cost,conveyance royality of all materials and labour charges etc.complete.
51
89572
1756.32
Drilling suitable holes in reinforced or plain concrete with power driven drill machine to a minimum depth of 100 mm to 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-in-charge.
-
-
-
Upto and including 12mm dia
30
2442
81.42
Upto and including 16mm dia
70
7124
101.78
Supply, mixing and placement of ready to use non shrink, cementitious free flow micro-concrete SikaRep® Microcrete-4 of 50 mm thickness as per specification, as per recommendation & as per the direction of engineer in charge. The rate inclusive all sorts of material, labours, tools & tackels complete
85
5030011
59176.61
Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge.
Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this
item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).
256
183111
715.28
Repair & Renovation of Bridge over Kharkhari Nallah on Khalikote Boirani Road at 16.900Km.
-
-
-
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge
-
-
-
75mm thick
240
50035
208.48
50mm thick
248
35025
141.23
Dismantling of Prestressed / Reinforced cement concrete grade M-20 & above including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres
32.67
57193
1750.65
Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge.
488
131496
269.46
Providing, mixing and applying bonding coat of approved adhesive on chippedportion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.Epoxy bonding of new concrete to old concrete
488
207068
424.32
R.C.C. M-40 grade including cost of all materials, cost of labour, machinery, T&P charges for suspended type staging / centering & shuttering suported on girders with MS bracket arrangement for cantilever portion as per approved Drawing & Technical Specifications and as per Section -1500, 1700 & 2300 of MoRT&H Specifications for Road & Bridge works (5th Revision)
-
-
-
Crash Barrier
9
120195
13355.09
Construction of RCC railing of M30 Grade in-situ with 20mm nominal size aggregate size true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications
33
73446
2225.66
Providing HYSD reinforcement for RCC works including bending, binding & placing in position as per Drawing including cost, conveyance of all materials, all labour and T&P etc complete.
9
78890
8765.56
Supplying, Fitting, Fixing and Placing in position Strip Seal Expansion Joints including cost, conveyance of all materials & cost of all labour etc complete as per approved Drawing & Technical Specifications and Clause-2606 of MoRT&H Specifications for Road & Bridge works (5th Revision)
40
567680
14192.01
Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
33.3
9278
278.63
Providing, Fitting & Fixing of Drainage Spouts in Deck slab as per approved Drawing & Technical Specifications and Section 2700 of MoRT&H Specifications for Road & Bridge works (5th Revision).
16
16609
1038.1
Providing and fixing of bi-directional retro reflactive raised pavement markers of approved colour, quality and made conforming to ASTM D-4280 made from injection moulded high impact polymer including cleaning, preparation of surface and fixing at position with approved quality adhesives including cost of all material, labour, transportation, taxes, duties, sundries, T&P etc complete.
100
28200
282
Providing and applying of anticorrosive treatment to exposed structural reinforcement by two coats of IPNET RB or equivalent with time interval of minimum 8 -10 hours between each coat after the application of two coats of alkaline rust converting primer. The application shall be done by brush or spray after cleaning existing reinforcement with wire / rotary wire brush to make the surfaces free from loose material, dirt, traces of corrosion etc. and throughly washing with water and allowing it to dry inclusive of all labour, materials, equipment etc. complete in all respect as per specifications and instructions of Engineer in Charge.
496.8
311597
627.21
Providing and painting of Anticorrosive paint on exposed surface of superstructures and complete as per specifications and manufacture's ecomendation by approved supplier as per the direction of Engineer-in-Charge.
535.84
171152
319.41
Dismantling of cement concrete grade M15 & M20 including T & P & scaffolding wherever necessary , sorting the dismantled material , disposal of unservicable material with all lifts & lead of 1000 mtr
54
34322
635.61
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.
-
-
-
Bar Above 12mm dia:-
324
3687
11.38
Guniting concrete surface with cement mortar applied with compressor after cleaning surface and spraying with epoxy complete as per Technical specification etc. complete as per direction of Engineer-In-Charge.
440
475912
1081.62
Patching of damaged concrete surface with polymer concrete and curing compounds, initiator and promoter, available in present formulations, to be applied as per instructions of manufacturer and as approved by the Engineer.
2.43
3170
1304.72
Painting two coats after filling the surface with Synthetic enamel paint in all shades on new plastred concrete surface etc complete
59.4
4902
82.53
Providing and inserting 12mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diameter (20mm to 30mm) uptodepth 150 mm at required spacing making the hole & cracks dust free by blowing compressed air , sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of Engineer-in-charge.
100
17138
171.38
Providing and injecting grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete / masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-charge. (The Payment shall be made on the basis of actual weight of approved grout injected)
100
44878
448.78
Providing & erecting Retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity gradse sheeting vide clause 801.3 fixed over aluminium sheeting 2mm thick supported on a mild steel angle iron post 75mm x 75mm x 6mm, 2 nos firmely fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm x 45cm x 60cm, 60 cm below ground level as per approved design.
-
-
-
90 cm equilateral triangle
4
23141
5785.42
Applying pre-packed cement based polymer mortar of strength 45 Mpa at 28 days for replacement of spalled concrete
190
38796
204.19
Cleaning and gurbbing road land including uprooting rank vegetation, grass, bushes, shrubs, sapling and trees girth up to 300mm, removal of stumps of trees cut earlier and desposal of unservicable materials and stacking of servicable materials to be used or auctioned, up to lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness. (in area of light jungle)
1440
11851
8.23
Providing & Laying 25mm thick mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-29,prepared by using mastic cooker and laid to required level and slope after cleaning the surface including provid antiskid surface with bitumen precoated finegrained hard stone chhiping of 13.2mm nominal size at te rate of 0.005cum per 10sqm and at an approximate spacing of 10cm centre to centre in both directions pressed into surface when the temprature of surface is not less than 1000C,protruding 1mm to 4mm over mastic suface,all complete as per clause 515.
300
410256
1367.52
Rough stone dry packing on Approns and Revetments with hard granite stone 30cm and above size including cost,conveyance royality of all materials and labour charges etc.complete.
51
93594
1835.18
Drilling suitable holes in reinforced or plain concrete with power driven drill machine to a minimum depth of 100 mm to 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-in-charge.
-
-
-
Upto and including 12mm dia
30
2442
81.42
Upto and including 16mm dia
20
2736
136.82
Supply, mixing and placement of ready to use non shrink, cementitious free flow micro-concrete SikaRep® Microcrete-4 of 50 mm thickness as per specification, as per recommendation & as per the direction of engineer in charge. The rate inclusive all sorts of material, labours, tools & tackels complete
5
295883
59176.61
Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge.
Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this
item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).
48
35416
737.85
Repair & Renovation of Bridge over Kodala nallah on Khalikote Boirani Road at 19.248Km
-
-
-
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge
-
-
-
75mm thick
90
18762
208.47
50mm thick
139
19630
141.23
Dismantling of Prestressed / Reinforced cement concrete grade M-20 & above including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres
20.1
35188
1750.65
Providing, mixing and applying bonding coat of approved adhesive on chippedportion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.Epoxy bonding of new concrete to old concrete
229
97169
424.32
R.C.C. M-40 grade including cost of all materials, cost of labour, machinery, T&P charges for suspended type staging / centering & shuttering suported on girders with MS bracket arrangement for cantilever portion as per approved Drawing & Technical Specifications and as per Section -1500, 1700 & 2300 of MoRT&H Specifications for Road & Bridge works (5th Revision)
-
-
-
Railing
9
119716
13301.86
Approach Slab
18
127320
7073.35
Construction of RCC railing of M30 Grade in-situ with 20mm nominal size aggregate size true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications
36
79940
2220.58
Providing HYSD reinforcement for RCC works including bending, binding & placing in position as per Drawing including cost, conveyance of all materials, all labour and T&P etc complete.
27
236670
8765.56
Supplying, Fitting, Fixing and Placing in position Strip Seal Expansion Joints including cost, conveyance of all materials & cost of all labour etc complete as per approved Drawing & Technical Specifications and Clause-2606 of MoRT&H Specifications for Road & Bridge works (5th Revision)
30
425760
14192.01
Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
33.3
9278
278.63
Providing, Fitting & Fixing of Drainage Spouts in Deck slab as per approved Drawing & Technical Specifications and Section 2700 of MoRT&H Specifications for Road & Bridge works (5th Revision).
8
8304
1038.1
Providing and fixing of bi-directional retro reflactive raised pavement markers of approved colour, quality and made conforming to ASTM D-4280 made from injection moulded high impact polymer including cleaning, preparation of surface and fixing at position with approved quality adhesives including cost of all material, labour, transportation, taxes, duties, sundries, T&P etc complete.
50
14100
282
Providing and applying of anticorrosive treatment to exposed structural reinforcement by two coats of IPNET RB or equivalent with time interval of minimum 8 -10 hours between each coat after the application of two coats of alkaline rust converting primer. The application shall be done by brush or spray after cleaning existing reinforcement with wire / rotary wire brush to make the surfaces free from loose material, dirt, traces of corrosion etc. and throughly washing with water and allowing it to dry inclusive of all labour, materials, equipment etc. complete in all respect as per specifications and instructions of Engineer in Charge.
237.8
149150
627.21
Providing and painting of Anticorrosive paint on exposed surface of superstructures and complete as per specifications and manufacture's ecomendation by approved supplier as per the direction of Engineer-in-Charge.
415.84
132823
319.41
Dismantling of cement concrete grade M15 & M20 including T & P & scaffolding wherever necessary , sorting the dismantled material , disposal of unservicable material with all lifts & lead of 1000 mtr
54
34322
635.61
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.
-
-
-
Bar Above 12mm dia:-
84
955
11.38
Guniting concrete surface with cement mortar applied with compressor after cleaning surface and spraying with epoxy complete as per Technical specification etc. complete as per direction of Engineer-In-Charge.
38.4
41473
1080.04
Patching of damaged concrete surface with polymer concrete and curing compounds, initiator and promoter, available in present formulations, to be applied as per instructions of manufacturer and as approved by the Engineer.
60
78283
1304.72
Painting two coats after filling the surface with Synthetic enamel paint in all shades on new plastred concrete surface etc complete
32.4
2673
82.53
Providing and inserting 12mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diameter (20mm to 30mm) uptodepth 150 mm at required spacing making the hole & cracks dust free by blowing compressed air , sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of Engineer-in-charge.
100
17138
171.38
Providing and injecting grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete / masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-charge. (The Payment shall be made on the basis of actual weight of approved grout injected)
100
44878
448.78
Providing & erecting Retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity gradse sheeting vide clause 801.3 fixed over aluminium sheeting 2mm thick supported on a mild steel angle iron post 75mm x 75mm x 6mm, 2 nos firmely fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm x 45cm x 60cm, 60 cm below ground level as per approved design.
-
-
-
90 cm equilateral triangle
4
23109
5777.45
Applying pre-packed cement based polymer mortar of strength 45 Mpa at 28 days for replacement of spalled concrete
86.5
17662
204.19
Cleaning and gurbbing road land including uprooting rank vegetation, grass, bushes, shrubs, sapling and trees girth up to 300mm, removal of stumps of trees cut earlier and desposal of unservicable materials and stacking of servicable materials to be used or auctioned, up to lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness. (in area of light jungle)
1440
11851
8.23
Drilling suitable holes in reinforced or plain concrete with power driven drill machine to a minimum depth of 100 mm to 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-in-charge.
-
-
-
Upto and including 12mm dia
25
2035
81.42
Upto and including 16mm dia
50
6841
136.82
Supply, mixing and placement of ready to use non shrink, cementitious free flow micro-concrete SikaRep® Microcrete-4 of 50 mm thickness as per specification, as per recommendation & as per the direction of engineer in charge. The rate inclusive all sorts of material, labours, tools & tackels complete
41
2426241
59176.61
Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge.
Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this
item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).
160
117654
735.34
Repair & Renovation of Bridge over Local Nallah on Khalikote Boirani Road at 17.221Km
-
-
-
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge
-
-
-
50mm thick
112
15817
141.23
Dismantling of Prestressed / Reinforced cement concrete grade M-20 & above including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres
20.1
35188
1750.65
Providing, mixing and applying Epoxy bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.
112
47523
424.32
R.C.C. M-40 grade including cost of all materials, cost of labour, machinery, T&P charges for suspended type staging / centering & shuttering suported on girders with MS bracket arrangement for cantilever portion as per approved Drawing & Technical Specifications and as per Section -1500, 1700 & 2300 of MoRT&H Specifications for Road & Bridge works (5th Revision)
-
-
-
Appraoach Slab
21
149284
7108.8
Railing
3
40011
13337.31
Construction of RCC railing of M30 Grade in-situ with 20mm nominal size aggregate size true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications
36
80062
2223.97
Providing HYSD reinforcement for RCC works including bending, binding & placing in position as per Drawing including cost, conveyance of all materials, all labour and T&P etc complete.
24
210373
8765.56
Supplying, Fitting, Fixing and Placing in position Strip Seal Expansion Joints including cost, conveyance of all materials & cost of all labour etc complete as per approved Drawing & Technical Specifications and Clause-2606 of MoRT&H Specifications for Road & Bridge works (5th Revision)
30
425760
14192.01
Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
33.3
9278
278.63
Providing, Fitting & Fixing of Drainage Spouts in Deck slab as per approved Drawing & Technical Specifications and Section 2700 of MoRT&H Specifications for Road & Bridge works (5th Revision).
8
8314
1039.32
Providing and fixing of bi-directional retro reflactive raised pavement markers of approved colour, quality and made conforming to ASTM D-4280 made from injection moulded high impact polymer including cleaning, preparation of surface and fixing at position with approved quality adhesives including cost of all material, labour, transportation, taxes, duties, sundries, T&P etc complete.
50
14100
282
Providing and applying of anticorrosive treatment to exposed structural reinforcement by two coats of IPNET RB or equivalent with time interval of minimum 8 -10 hours between each coat after the application of two coats of alkaline rust converting primer. The application shall be done by brush or spray after cleaning existing reinforcement with wire / rotary wire brush to make the surfaces free from loose material, dirt, traces of corrosion etc. and throughly washing with water and allowing it to dry inclusive of all labour, materials, equipment etc. complete in all respect as per specifications and instructions of Engineer in Charge.
120.8
75766
627.21
Providing and painting of Anticorrosive paint on exposed surface of superstructures and complete as per specifications and manufacture's ecomendation by approved supplier as per the direction of Engineer-in-Charge.
415.84
132823
319.41
Dismantling of cement concrete grade M15 & M20 including T & P & scaffolding wherever necessary , sorting the dismantled material , disposal of unservicable material with all lifts & lead of 1000 mtr
54
34322
635.61
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.
-
-
-
Bar Above 12mm dia:-
84
955
11.38
Guniting concrete surface with cement mortar applied with compressor after cleaning surface and spraying with epoxy complete as per Technical specification etc. complete as per direction of Engineer-In-Charge.
62.4
67460
1081.09
Patching of damaged concrete surface with polymer concrete and curing compounds, initiator and promoter, available in present formulations, to be applied as per instructions of manufacturer and as approved by the Engineer.
2.43
3170
1304.72
Painting two coats after filling the surface with Synthetic enamel paint in all shades on new plastred concrete surface etc complete
32.4
2673
82.53
Providing and inserting 12mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diameter (20mm to 30mm) uptodepth 150 mm at required spacing making the hole & cracks dust free by blowing compressed air , sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of Engineer-in-charge.
200
34276
171.38
Providing and injecting grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete / masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-charge. (The Payment shall be made on the basis of actual weight of approved grout injected)
200
89756
448.78
Providing & Laying 25mm thick mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-29,prepared by using mastic cooker and laid to required level and slope after cleaning the surface including provid antiskid surface with bitumen precoated finegrained hard stone chhiping of 13.2mm nominal size at te rate of 0.005cum per 10sqm and at an approximate spacing of 10cm centre to centre in both directions pressed into surface when the temprature of surface is not less than 1000C,protruding 1mm to 4mm over mastic suface,all complete as per clause 515.
242.52
331066
1365.11
Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material with in all lifts and lead up to 1000 metres.
24.25
145
5.99
Providing & erecting Retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity gradse sheeting vide clause 801.3 fixed over aluminium sheeting 2mm thick supported on a mild steel angle iron post 75mm x 75mm x 6mm, 2 nos firmely fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm x 45cm x 60cm, 60 cm below ground level as per approved design.
-
-
-
90 cm equilateral triangle
4
23131
5782.76
Applying pre-packed cement based polymer mortar of strength 45 Mpa at 28 days for replacement of spalled concrete
86.5
17662
204.19
Cleaning and gurbbing road land including uprooting rank vegetation, grass, bushes, shrubs, sapling and trees girth up to 300mm, removal of stumps of trees cut earlier and desposal of unservicable materials and stacking of servicable materials to be used or auctioned, up to lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness. (in area of light jungle)
1440
11851
8.23
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work. by Manual Means (Depth upto 3 m)
108
9967
92.29
Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per direction by the Engineer in charge.
13.5
20793
1540.28
PCC M-15 Grade using 40 to 10mm size crushed stone aggregates mixed by concrete mixer, laying with all leads and lifts & compacting as per approved Drawing & Technical Specifications and Section - 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision).
-
-
-
Foundation
13.5
77779
5761.42
PCC M-20 Grade using 40 to 10mm size crushed stone aggregates mixed by concrete mixer, laying with all leads and lifts & compacting as per approved Drawing & Technical Specifications and Section - 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision).
-
-
-
Superstructure
54
340675
6308.8
Rough stone dry packing on Approns and Revetments with hard granite stone 30cm and above size including cost,conveyance royality of all materials and labour charges etc.complete.
86.4
157423
1822.03
Supply, mixing and placement of ready to use non shrink, cementitious free flow micro-concrete SikaRep® Microcrete-4 of 50 mm thickness as per specification, as per recommendation & as per the direction of engineer in charge. The rate inclusive all sorts of material, labours, tools & tackels complete
41.6
2461746
59176.61
Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge.
Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this
item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).
80
58960
737.01
Repair and Renovation of Rushikulya Bridge on Purushottampur Jagannathpur Road at Chainage 2.7 Km
-
-
-
Dismantling of Prestressed / Reinforced cement concrete grade M-20 & above including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres etc. complete as per direction of Engineer - in- charge.
64.6
113091
1750.65
Construction of RCC railing of M30 Grade in-situ with 20mm nominal size aggregate size true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications
290
652897
2251.37
R.C.C. M-40 grade including cost of all materials, cost of labour, machinery, T&P charges for suspended type staging / centering & shuttering suported on girders with MS bracket arrangement for cantilever portion as per approved Drawing & Technical Specifications and as per Section -1500, 1700 & 2300 of MoRT&H Specifications for Road & Bridge works (5th Revision)
-
-
-
Railing
32.4
436039
13458.01
Approach Slab
5
36147
7229.5
Providing HYSD reinforcement for RCC works including bending, binding & placing in position as per Drawing including cost, conveyance of all materials, all labour and T&P etc complete.
37.4
327831
8765.56
Supplying, Fitting, Fixing and Placing in position Strip Seal Expansion Joints including cost, conveyance of all materials & cost of all labour etc complete as per approved Drawing & Technical Specifications and Clause-2606 of MoRT&H Specifications for Road & Bridge works (5th Revision)
130
1844961
14192.01
Providing and Fixing of Elastomeric bearing assembly consisting of 7 layers of elastomer bonded to 6 nos Internal reinforcing steel laminates by the process of vulcanisation conforming to IS-83 (Part-III)/2015 in suspended span as well as on Piers in all respect etc. complete.
97200
44712
0.46
Lifting of span for replacement of bearing . Lifting of span i.e. superstructure structure of bridge for repalcement of old bearings and including all hire and running expenses of plants hydraulic jacj, power jack, generator set , welding machine, and equipment& span length 30 mts each side
4
1542472
385618
Providing and fixing steel structure arrangement for replacing the bearings of bridge as required with Cost of scaffolding and staging or temporary steel structure for entire work of this bridge.
4
242284
60571.04
Cleaning and greasing of Existing Bearings and also provide steel plate box etc. complete.
88
1450292
16480.6
Providing, Fitting & Fixing of Drainage Spouts in Deck slab as per approved Drawing & Technical Specifications and Section 2700 of MoRT&H Specifications for Road & Bridge works (5th Revision).
52
53981
1038.1
Providing and inserting 12mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diameter (20mm to 30mm) uptodepth 150 mm at required spacing making the hole & cracks dust free by blowing compressed air , sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of Engineer-in-charge.
1100
188518
171.38
Providing and injecting grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete / masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-charge. (The Payment shall be made on the basis of actual weight of approved grout injected)
1100
493658
448.78
Drilling suitable holes in reinforced or plain concrete with power driven drill machine to a minimum depth of 100 mm to 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-in-charge.
-
-
-
Upto and including 12mm dia
50
4071
81.42
Upto and including 16mm dia
25
3420
136.82
Upto and including 20mm dia
25
4036
161.45
Flush pointing to stone masonry in cement mortar 1:3 including racking out joints 5mm deep, cleaning, pressing cement mortar finishing and curing including cost of materials, labour, scaffolding with initial lead and lift upto 10m etc. complete as per the direction of Engineer-in-charge
350
113753
325.01
Supply, mixing and placement of ready to use non shrink, cementitious free flow micro-concrete SikaRep® Microcrete-4 of 50 mm thickness as per specification, as per recommendation & as per the direction of engineer in charge. The rate inclusive all sorts of material, labours, tools & tackels complete
15
887649
59176.61
Applying pre-packed cement based polymer mortar of strength 45 Mpa at 28 days for replacement of spalled concrete
480
98011
204.19
Cleaning and gurbbing road land including uprooting rank vegetation, grass, bushes, shrubs, sapling and trees girth up to 300mm, removal of stumps of trees cut earlier and desposal of unservicable materials and stacking of servicable materials to be used or auctioned, up to lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness. (in area of light jungle)
24000
197520
8.23
Providing & Laying 25mm thick mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-29,prepared by using mastic cooker and laid to required level and slope after cleaning the surface including provid antiskid surface with bitumen precoated finegrained hard stone chhiping of 13.2mm nominal size at te rate of 0.005cum per 10sqm and at an approximate spacing of 10cm centre to centre in both directions pressed into surface when the temprature of surface is not less than 1000C,protruding 1mm to 4mm over mastic suface,all complete as per clause 515.
1015
1401349
1380.64
Providing and errecting a "W" Metal beam crash barrier comprising of 3mm thick corugated sheet metal beam rail,70 cm above road / ground level,fixed on ISMC series chanel vertical post,150x75x5mm spaced 2.0mtr c/c,1.80 mtr high,1.10 mtr below ground /road level,all steel parts and fittments to be galvanised by hot dip process,all fittings to confirm to IS 1367 & IS1364,metal beam rail to be fixed on the vertical post with a spacer of channel section 150x75x5mm,330 mm long complete as per clause 810 etc. complete as per the direction of Engineer-in-charge
200
511924
2559.62
Providing, fixing retro-reflectorised, cautionary, mandatory & informatory sign as per IRC-67 made of high intensity gr. aluminium sheeting 1.5mm thick supported on MS angle post 75 x 75 x 6mm firmly fixed to the ground by means of PCC M15 grade foundation of 45cm x 45cm x 60cm, 60cm below ground level as per drawing and Section 800 of MoRT&H Specifications for Road & Bridge works (5th Revision). :
-
-
-
90 cm equilateral triangle
10
58008
5800.82
Providing, fixing of direction & place Identification Signs size upto 0.9sqm Board retro-reflectorised, cautionary, mandatory & informatory sign as per IRC-67 made of high intensity gr. aluminium sheeting 1.5mm thick supported on MS angle post 75 x 75 x 6mm firmly fixed to the ground by means of PCC M15 grade foundation of 45cm x 45cm x 60cm, 60cm below ground level as per drawing and Section 800 of MoRT&H Specifications for Road & Bridge works (5th Revision).
-
-
-
Upto 0.9 sqm size board
2
24754
12377.36
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes as per Technical Specifications and Clause - 803.4 of MoRT&H Specifications for Road & Bridge works (5th Revision).
148.19
41290
278.63
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%