Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 1,11,400Document Cost
₹ 10,000Tender Fee
Refer Documents
Summary
Construction Of Proposed B Type Quarter For A.d.m. At Paralakhemundi In The District
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_EICCL_105074_3Bid Award Id
ViewTender No
CCE R and B RGDA- 04/2024-25Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. In depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. (Measurement will be taken on finished compacted section only).
Ground Floor
264.72
274541
1037.1
Supplying, diluting and preparing chemical emulsion like imidacloprid 30.5% SC or other chemicals approved by central insecticides board of as directed by the manufactured and spraying the mixture uniformly by sprayers as pre- constructional Anti-termite treatment confirming to IS 6313 (part-ll) and creating a chemical barrier under and around the column pits, wall trenches basement excavation joints, surrounding the pipes and conduits etc. at the rate of 7.5 liters per sqm on vertical surface and 5.0 liters per sqm on horizontal surfaces, 50% of the emulsion to be filled in the holes made in trenches at 150mm center ( or as directed by the manufactured ) including the cost of all materials cost of all labour, conveyance loading unloading , T&P. etc. all complete as per the direction of engineer-in-charge.
Ground Floor
205.06
21436
104.54
Cement concrete of prop.(1:3:6) in foundation up to lowest bed level using hard black granite crusher broken metal of size 40 mm size down graded of approved quality from approved quarry as per approved design including hoisting,lowering,laying compacting concrete in layers not exceeding 6” thick, watering, curing for three weeks shuttering the exposed surfaces, finished smooth, providing grooves of beads where necessary including cost, conveyance, royalty, & taxes of all materials, with labour, T&P required for the work etc., complete in all respects including dewatering if required as per direction of Engineer-in-Charge.
31.74
186412
5873.12
Cement concrete of prop.(1:3:6) in foundation up to lowest bed level using hard black granite crusher broken metal of size 12 mm size down graded of approved quality from approved quarry as per approved design including hoisting,lowering,laying compacting concrete in layers not exceeding 6” thick, watering, curing for three weeks shuttering the exposed surfaces, finished smooth, providing grooves of beads where necessary including cost, conveyance, royalty, & taxes of all materials, with labour, T&P required for the work etc., complete in all respects including dewatering if required as per direction of Engineer-in-Charge.
18.14
122403
6747.7
Fly ash Brick masonry using bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix (1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.
Substructure
155.61
889840
5718.4
Fly ash Brick masonry using bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super stracture including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.
Ground Floor
79.72
458925
5756.72
First Floor
45.34
277752
6125.99
Terrace Floor
16.98
111230
6550.65
Half brick work with Fly ash Brick using bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:4) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super stracture including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.
Ground Floor
1.69
10118
5987.16
First Floor
4.11
26124
6356.43
R.C.C.work of Grade M-25 having a minimum compressive strength in work test of 250kg/Cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 & IS 516 using 20mm down graded size black crusher broken hard granite stone chips of approved quality & from approved quarry including hoisting, lowering & laying concrete & compacting by using vibrators, watering & curing for 4 (four) weeks centring, shuttering & finishing the exposed surface smooth providing grooves or beads where necessary including cost & conveyance royalties & taxes of all materials & labour required for the work etc., complete in all respect but excluding cost & conveyance of M.S.Rods or tor steel and binding wires of 18 to 20 gauge & labour charges for straightening, cutting, bending etc.,of the HYSD Rods or tor steel & binding wires & laying the grills placing in proper position as per direction of Engineer-in-Charge.
Ground Floor
Footing
34.75
237382
6831.15
Column up to Plinth
3.81
60499
15879.03
Plinth Beam
11.15
85817
7696.63
Column above plinth
5.5
87334
15879.03
Lintle
1.02
14722
14434.07
Chajja
1.11
1377
1240.86
Roof Beam
13.78
218813
15879.03
Slab
26
362006
13923.33
Stair Case
3.35
53020
15827.07
First Floor
Column up to roof level
5.5
98350
17881.9
Lintle
7.98
128860
16147.92
Chajja
5.94
8391
1412.78
Roof Beam
8.31
148598
17881.9
Slab
18.17
282271
15535.04
Stair Case
2.86
50963
17819.53
Terrace Floor
Column up to roof level
0.93
18859
20279.36
Lintle
1.3
23658
18198.56
Chajja
0.59
955
1618.71
Roof Beam
1.68
34069
20279.36
Slab
3.42
59723
17463.12
Boundary Wall
Column Base Footing
34.02
211688
6222.47
Column
6.08
71617
11779.16
Beam
13.6
160196
11779.16
Supplying fitting and placing uncoated HYSD Steel reinforcement works using HYSD (FE-500) steel of approved manufacturer as per section 1600 §ion 1900 of MORT&H specification for Road and Bridge works including cost, conveyance and taxes of all materials, binding wires 18 to 20 gauge and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. (weight of reinforcement sall be calculated on the basis of IS 1732. wastage, overlaps, couplings, welded joints, space bars, chairs, stays, hangers and annealed steel wires or other method of binding & placing shall not be considered for payment) Ground Floor
111.3
971418
8727.93
First Floor
41.22
361116
8760.7
Terrace Floor
7.35
64643
8795.1
12mm thick cement plaster in cement mortar (1:6) finished smooth to brick walls after raking out the joint including watering and curing with cost and conveyance of all materials and labour with T& P required for the work with all taxes and royalities etc. complete in all respect as per direction of Engineer in charge. Compound Wall
Ground Floor
437.98
84105
192.03
First Floor
146.99
28896
196.59
Terrace Floor
90.38
18192
201.29
16mm thick cement plaster (1:6) finished smooth to inside 9''/10'' thick brick walls after raking out the joint including watering, curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect as per direction of Engineer in charge. Ground Floor
567.73
156426
275.53
First Floor
300.3
84792
282.36
Terrace Floor
45.58
13190
289.39
06 mm thick cement plaster (1:4) finished smooth to inside 9''/10'' thick brick walls after raking out the joint including watering, curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect as per direction of Engineer in charge. Roof Slab
Ground Floor
210.97
44683
211.8
First Floor
150.03
32579
217.15
Terrace Floor
72.64
16174
222.66
Supplying, fitting & fixing of 8-10 mm thick & size of 600x600 mm Vetrified floor tile colour of matt finish with veilcraft (VC/FT ) shield( Scratch free/stain free) with water absorption limit between 0.08% to 3% and conforming to IS : 15622:2006 (Group B Ib). laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge
Ground floor
67.07
80173
1195.37
First Floor
94.02
113626
1208.54
Supplying, fitting & fixing of 8-10 mm thick and size of 600x600 mm vertified wall tile of in dadoes, skirting and risers of steps of laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge. Ground floor
7.31
8797
1203.55
First Floor
12.23
14961
1223.37
Providing and fixing 20mm thick mirror polished granite stone slab, machine cut stone (sample of granite should be approved by EIC) for kitchen platforms, vanity counters, facias and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge, making gas pipe hole etc. laid over 25mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights. In all floors and all heights. etc. required for the work all complete as per direction of the Engineer-in-charge
Ground floor
25.66
63886
2489.75
First Floor
14.24
35643
2503.05
Providing and fixing 20mm thick mirror polished granite stone skirting, machine cut stone (sample of granite should be approved by EIC) for kitchen platforms, vanity counters, facias and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge, making gas pipe hole etc. laid over 25mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge. In all floors and all heights. In all floors and all heights etc. required for the work all complete as per direction of the Engineer-in-charge
Ground floor
1.69
4994
2955.27
First Floor
1.69
5027
2975.09
Supplying, fitting & fixing of 8-10 mm thick & size of 300x300 mm Vetrified floor tile colour of matt finish with veilcraft (VC/FT ) shield( Scratch free/stain free) with water absorption limit between 0.08% to 3% and conforming to IS : 15622:2006 (Group B Ib). laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge
Ground floor
31.96
33845
1059
First Floor
9.17
10274
1120.5
Supplying, fitting & fixing of 8-10 mm thick and size of 300x300 mm vertified wall tile of in dadoes, skirting and risers of steps of laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge. Ground floor
5.16
4781
926.74
First Floor
1.8
1703
946.56
Supplying, fitting & fixing of Chequered tile of premium grade having thickmness 7mm to 8mm of size 30cm x 30 cm in floors laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge. Ground floor
24
15496
645.67
Providing fitting fixing of inter locked paver block of size 80 mm thick and filling the joints with sand of approvedv quality including rubbing & polishing etc comleteincluding cost of all materials, labour with T&P etc. complete in all respect..
150
91260
608.4
Providing and fixing of WPC door frames with rebate cuts and finished cross section size 75mm x 45mm or 90mm x 50mm, including cost of all materials, cost of all labour conveyance, taxes, loading, unloading scaffolding, slaging watering and curing, T&P, etc, complete as per the direction of the Engineer-in-charge.
Ground Floor
37.4
26963
720.96
First Floor
26.4
19033
720.96
Providing and fixing 32mm thick flush door shutters confirming to IS2002 decorative type core of block board construction with frame of ist class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both face of shutters inclusive of 4 nos of stainless steel butt hinges, 40 mm stainless steel screws, cylindrical lock tower bolt, PVC door etc required for the work all complete as per direction of the Engineer-in-charge. Ground Floor
16.8
179232
10668.61
First Floor
11.34
120982
10668.61
Supply and installig UPVC - 3 tracks sliding windows and 2 sashes (shutter) with SS mesh sash dimension of 58mm x 32mmnand sash dimension of 61mm x 37mm for windows with corners fusions welded, fully reinforced with galvanised steel of 1.2mm to 2mm. The sash will be fitted with 5mm reflective toughened glass of make - saint gobain/ AIS/ Goldplus. The windows must be installed complete with all kinds of ironmonergy (including EPDM gaskets, bridging wedges and glass packers) and with suitable water draining system. Application of silicon sealant from inside / outside of dowcorning / GE or equivalent including cost of all materials, all labour, sundries, T & P etc. complete in all respects as per approved drawings and directions of Engineer in charge
Ground Floor
16.61
99394
5984
First Floor
12.96
77552
5984
Second Floor
1.22
7300
5984
Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA/ NCL VEKA LTD.). Ventilator/ Top Hung-60-Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outer frames, 75 mm x 60 mm x 2.25 mm for casement Window Sash Profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM, weathering seal resistant accessories, like clipping Jocking system tone including cost and conveyance of all materials, accessories, labour charges, materials Nuotiosoite pine thermobninstalled at the nonaktsmeners, silicon rubber sealant, easy glazing/deglazing at site etc..and product conforming to ASTM D 638-14.EN-477-95 and other applicable codes and standards.
Ground Floor
1.26
8964
7115
First Floor
1.94
13803
7115
Supplying, fitting, fixing of all types of MS Grills made of ISI marked standard MS Angles of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings, including mending to sizes supplying and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge.
Ground Floor
482.36
32052
66.45
First Floor
383.94
25512
66.45
Terrace Floor
69.26
4602
66.45
Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in-charge.
Ground Floor
1216.68
96190
79.06
First Floor
597.32
48400
81.03
Terrace Floor
208.6
17326
83.06
Providing two coats with Weather coat paint on plaster surface of approved shade on new works over a coat of primer to give an even shade including scaffolding to outside walls, including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. Ground Floor
695.48
66543
95.68
First Floor
151.67
15050
99.23
Terrace Floor
90.83
9351
102.96
Providing, and finishing wall and ceiling surface with water based wall putty of approved make on Out side plaster/ concrete surface and finishing the surface smooth and even by sand papering including cost, conveyance, royalty and taxes of all materials with all labour with T&P required for the work etc. complete.
Ground Floor
527.08
44021
83.52
First Floor
445.65
38045
85.37
Terrace Floor
117.77
10278
87.28
Painting two coat with Plastic Emulsion Paint over a coat of primer to make in even finished surfaces in all floors and heights to wall surface oa pproved make and shade including cost, conveyance, royalties , cost of all labour, labour cess, T&P etc. required for the work complete as directed by the Engineer-in-Charge.
Ground Floor
527.1
54059
102.56
First Floor
445.65
46655
104.69
Terrace Floor
117.77
12588
106.89
Painting two coat with approved Synthetic enamel Paint on steel work to make in even finished surfaces in all floors and heights to Iron surface of approved make and shade including cost, conveyance, royalties , cost of all labour, labour cess, T&P etc. required for the work complete as directed by the Engineer-in-Charge.
Ground Floor
18.54
3238
174.68
First Floor
14.22
2545
179.02
Terrace Floor
2.57
471
183.49
Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustarde of Size 32mmx32mmx2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in staircase as per approved design and specification buffing polishing etc. including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge
Ground Floor
55.91
15608
279.18
First Floor
55.91
15608
279.18
Providing and laying grading conc. 25 mm (avg. thickness) cement concrete of required slope of mix 1:2:2 (1cement:2sand:2 graded stone aggregate of 10 mm nominal size) mixed with approved water proof compound as per manufacturer's specification on top of slab including cement slurry, all complete, including the cost of water proofing admixture, which should be approved by the Engineer-In-Charge Ground floor
205.07
96085
468.55
EI Works
Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with S.P 5/6Amp, one way modular switch ISI marked(L&T/crabtree/ Havells/ ROMA/ SIEMENS/Legrand/Finolex) and ceiling rose ISI marked mounted on Modular GI box of 18SWG having modular base & cover of suitable size with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard )
Group-A. L.P.- 25 F.P.- C.B.-2
27
15336
568
Group-B. L.P.-50 F.P.- 15 C.B.-
60
48540
809
Group-C L.P.-25 F.P.- 15 C.B.-
40
44560
1114
Recessed wiring for 5/6Amp modular Socket outlet with 2x1.5mm2 FR PVC insualted single core multistand copper conductor of ISI marked in recess 20mm dia Non-metalic PVC flexible conduit with piano type switch,phenolic laminated sheet suitable size ISI marked on modular GI box and earthing point with 1x1.5sqmm FR PVC insulated single core multistand copper conductor for loap earthing etc.as required(make of wire-Finolex/L&T/Anchor/ Havels/V-Guard)
5
2835
567
On Existing board.
20
4380
219
Wiring for twin control light point and FP with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess PVC conduit with 2 way Modular type switch with ISI marked, phenolic laminated sheet suitable size ISI marked G.I. box(18 SWG) and earthing point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc as required. ( Make of wire -Finolex / L&T / Anchor / Havels /V Guard )
10
6420
642
Recessed submain wiring along with earth wire with the following sizes of PVC insualted single core multistand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non-metalic heavy duty flexible conduit 1.6mm in recess PVC conduit as required(make of wire-Finolex/L&T/ Anchor/ Havels/V.Guard)
a)1x1.5mm2(1.19.1.SOR-17) inverter wiring
180
10980
61
b)2x1.5mm2(1.19.2.SOR-17) loop wiring
90
6480
72
c)2x2.5mm2+1x1.5mm2(1.8.2.SOR-17)
200
34800
174
d)2x4mm2+1x1.5mm2 (1.8.3.SOR-17)
250
47750
191
e)2x6mm2+1x2.5mm2(1.8.4.SOR-17)
110
24420
222
f)4x6mm2+2x2.5mm2(1.8.5.SOR-17)
30
9480
316
S/F of 20W/18W LED batten light of crompton/Havells make.
25
17275
691
S/F.of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of Ceiling rose.
5
50
10
S/F.of 9W/10Wt.LED lamps of Havels/Crompton make.
5
785
157
Supplying and fixing of Modular G.l. box of 18 SWG on surface or in recess with suitable size Modular base & cover module in front including providing and fixing of Modular Bulbul Callbell of ROMA or Equivalent make with connection, painting etc as required.(For light plugs to be used in non residential buildings)
2
828
414
S/F of 1x15W surface celing LED light made up of pressure die cast housing with secondary optics ,IP66 protection with fixing on ceiling of Havells make(ENDURA NEO DL SURFACE) or Equivalent of Crompton/Philips and Connection as per direction of Engineer-in-Charge.
20
37180
1859
S/F of1x15W LED of 3700K Warm white/6000K coolday white recess mounted downlighter made up of pressure die cast Al. heat sink and PC diffuser in white powder coated finish with integrated driver Havells(INTEGRA)/ Crompton (CROM ROUND) OR Equivalent model of Havells & Crompton make including cutting of false ceiling and fixing as per direction of Engineer-in-Charge.
65
99710
1534
Supplying and fixing Modular G.l. box of 18 SWG on surface or in recess with Modular base & cover for module in front including providing and fixing 4 Module LED Footlamp(Havells/crabtree/ crompton/philips/) connection, painting etc as required.
20
17000
850
S/F.of 48"A.C.Ceiling fans complete with ISI marked (Havells (Spacer/Velocity) /Usha Allure ()/ Orient (Jazz)/Bajaj-Elegance (Ivory)/ crompton Aura plus(ivory) make e including all accessories & connection as per direction of Engineer-in-charge.
19
48792
2568
Supplying and fixing of stepped type modular regulator of ISI marked(ROMA/Crabtree/L&T/ Legrand) on Modular G.l. box of 18 SWG on surface or in recess with suitable size Modular base & cover module in front including providing and fixing connection, painting etc as required.(For light plugs to be used in non residential buildings)
19
8265
435
Providing and fixing extra down rod of 60 cm length G.I. pipe 20 mm dia heavy gauge including Cutting & threading of Downrod as per direction of Engineer-in-charge.
19
1786
94
Supply, delivery and fixing of Ceiling fan hook box made out of 18 swg GI sheet and containing 10 mm dia round ms bar projecting atleast 150mm on either side & duly bent to accommodate ceiling fan down rod bolt & having earthing arrangement as per direction of Engineer-in-charge.
19
2280
120
S/F of 300mm metal exhaust fan with wall cutting masonary work including all accessories of USHA(Jet Dix)/ Bajaj (Bahar)/ Crompton make & connection as per direction of Engineer-in-charge.
5
9105
1821
Supplying and fixing Modular G.l. box of 18 SWG on surface or in recess with Modular base & cover for module in front including providing and fixing 6pin 15/16Amp modular socket outlet and SP 15/16Amp oneway modular switch (Power Plug) with indicator connection, painting etc as required.
12
7176
598
Supplying and fixing suitable size Modular G.l. box for surface or in recess with Modular base & cover in front including providing and fixing of 6pin 15/16Amp modular socket outlet for AC connection, painting etc as required.
8
4016
502
Supplying and fixing of Modular G.l. box for suitable module on surface or in recess with Modular base & cover and blanking plate in front including providing and fixing of 25AMP DOL starter (ROMA/ Crabtree/Havells make) of modular type switch, connection, painting etc as required.
8
5648
706
S/F.of Computer board consisting of 4Nos 5/6AMP Modular type socket & switch including suitable size of modular GI box ISI Mrked complete with connection as per the direction of Engineer-in-Charge.
4
6060
1515
S/F of Modular Multipurpose board with 2nos. Of 6/6A modular SP switch and modular socket ncluding suitable size of GI modular box and modular base &cover (ROMA/ Crabtree/ Havells/L&T or equivalent)complete with connection as per the direction of Engineer-in-Charge.
8
9488
1186
DISTRIBUTION BOARD
4
32956
8239
of S/F of (4+12) way TPN Double door PDB D. Box (Hager/ L&T/ C&S/Legrand or equivalent make ) with 63Amp FP MCB ,12x(6-32Amp)SP MCB of Hager/ L&T/Legrand/C&S or Equivalent make including all accessories and connection. as per direction Engineer-in-Charge.
1
10933
10933
MV CABLE S/F of 25sq.mm 3.5 Core Alluminium, armoured LT power Cable of XLPE insulated 650/1100V grade ISI mark(make-Havells/Polycab) as per direction of Engineer-in-charge. (To be Connected from PDB box from 250Am panel of all floor)
60
12060
201
S/M of end termination with brass compression gland and Al. lugs for 4 Core 25 mm2 PVC insulated and PVC sheathed/XLPE Al. cable of 1.1kV as per direction of Engineer-in-charge.(DSR2022-9.1)
2
636
318
Laying & fixing of one no. PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size on Cable Tray as required.
upto 35 Sqmm(clamped with 1mm thick saddle)
50
1650
33
EARTHING MATERIAL
P/F of 6 SWG G.I. wire on surface or in recess for loop earthing along with existing surface/recessed conduit/ submain wiring/cable as required(to be run along with 1 cable for earth wire)(SOR-3.19) (including lift)
50
757
15.15
P/F of earth bus of 50mm×5mm copper strip ISI marked on surface for connection etc as required
1
874
874.66
S/F of Electrical safety acrylic chart/Poster depicted with various safety precautions , management and provides information to perform First Aid in case of electric shock etc in English and odia language with Multi color images and sign
1
500
500
S/f.of Standard earthing with G.I.earth pipe 4.5m long 40mm dia including all accessories (With charcoal and salt) with masonary enclosure with coverplate having locking arrangement (Sl.No.5.2.of DSR2022) as per direction of Engineer-in-charge.
2
13710
6855
S/F.of Special earthing complete with provision of 600x600x3mmthick or (2ft x 2ft) copper plate, 38/40mm dia 3mtr long G.I.pipe , 25x3mm thick Cu.flat charcoal and salt,funel,earthpit chamber with masonary work including all accessories and connection as per direction of Engineer-in-charge(1Sl l.No.5.6.of DSR2022)
1
13838
13838
Supply and laying of 25mmx5mm copper strip on surface or in recess for connection etc as required.(Connection to be made from special earth electrode to Main panel )as per direction of Engineer-in-charge.
15
12795
853
Supply of Insulation mats Class A insulation of size 1Mx2Mx2mm.
1
2979
2979
Electrical Inspection charges for building
1
5512
5512.5
11 S/F of 1x60W 5700K LED street light made up of pressure die cast housing with secondary optics ,IP66 protection Havells make(ENDURA SUNDOWN TG)/Crompton(FREEDOM+) including all accessories and connection as per direction Engineer-in-Charge.
8
65704
8213
S/F of 4sq.mm 2 Core Al, LT power Cable of PVC insulated 650/1100 grade(make-Havells/Polycab)(For streetlight)
80
4240
53
S/F of New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with
symmetrical light distribution, spun aluminium landscape luminaire(GATE LIGHT) with high power LEDs as light source. of Havells/crompoton/phoilips make with suitable size of G.I pipe for Fitting and all accessories & Connection.(RUBY CLEAR/CORAL OPAL)
2
20398
10199
S/F of MS gate light jalli (2ftx2ftx2ft)
2
4000
2000
S/F of Glow sign board of 18SWG GI board fixing of LED lamp along with PVC cover plate including all accessories and connection.
2
4000
2000
S/F of 6 sq.mm 2 Core copper cable, armoured LT power Cable of XLPE /PVC insulated 650/1100 grade(make-Havells/Polycab)(Gate Light & minimast)
150
25800
172
Supplying and laying UPVC pipe (80 Schedule) of following diameter burried in ground at appropriate depth for cable laying as required. 110 mm dia (Energy meter to 100Amp Panel)
20
5920
296
S/F of 15Ltr Geyser of Bajaj (Shakti/Majesty-make)/Havells/V-Guard/Racold/AOsmith including fixing on wall and connecting with water inlet & outlet complete with all accessories and connection as per Direction of Engineer-in-Charge.
2
19298
9649
S/F of 2(Two) battery of 200AH having 60months warranty with 2500VA Inverter of sinewave technology,max 2000W loading capability,LCD display, short circuit, overlaod protection, of Make Luminous/Exide/Sfsonic including all accessories and connection as per direction of Engineer-in-charge.
1
77143
77143
Supply of 1.5 Ton 3Star Fixed split Air conditioners of Voltas/CarrierBlue Star/LG/Hitachi/Daikin/Toshiba or Equivalent make.
2
94788
47394
S/F.of 4KVA Digital wall mounted Voltage Stabilizer input 130V-300V range t (Make-V.guard/ Shakti/ Luminous)
2
12638
6319
Installation and fixing of AC machine including all accessories and connection
2
4000
2000
S/F of MS outdoor stand
2
3000
1500
Extra 1/2" and 1/4" suction discharge copper pipe to the outdoor unit of 2Ton and 1.5Ton split type AC machine.
10
7500
750
Supply of 8Mtr high hot dip galvanised Octagonal/round poles with 130mm bottom dia sheet thickness baseplate of 200x200x16mm with FDN Bolts with inbuilt sleek junction box with one 6A SP MCB and 10sqmm stud connector of Bajaj/valmonte/JK make /Equivalent make including transportation,loading and unloading.
1
20973
20973
S/F of galvanised double arm decorative bracket lingth 1mtr with 70mm A/F welded with canopy.
2
5542
2771
S/F 1x90W LED street light made up of pressure die cast housing with toughned glassindividual high powered LEDs with secondary optics ,IP66 protection including GI bracket and all accessories and connection complete of Havells make/ Crompton
4
42000
10500
S/F 2.5 sq.mm 3 Core , round Cu cable for wiring from junction box to light fitting including the labour charges towards connection make-finolex/Polycab/havells
15
1620
108
Construction of foundation with supply of all material such as steel ,reinforcement ,metal chips,cement ,sand ,cable entry,shuttering for RCC work(1:1.4:8) with labour charges for construction including erection and commissiong of pole with arm to proper alignment including fitting of the lamp.
1
4500
4500
Supply and installation of GI wire coil earthing with supply of all eathing materials such as charcoal ,salt and other necessary accessories ,labour etc.
1
248
248.13
Fabrication of 100Amp Floor Panel board size 36"×24"×12" with powder coat made out of SWG CR sheet with designing with (i) 100Amp 36kA, 4P MCCB of Adjustable thermal & adjustable magnetice setting of Legrand /L&T/ Hager Make. (ii)100A, Kitkat fusee-3Nos (iii)63A, 4P MCCB C- Series Legrand / Hager / L&T Make. - 4 Nos. (iv)63AMP, DP MCB C- Series Legrand / Hager / L&T Make. - 6 (v) 125Amp, 4P On-Load Change over of L&T/Hager/Legrand make (vi) S/F.of Digital Voltmeter,Ammeter, Selector switches CT coil and Indicator lamp RYB with toggle switch etc. -1 set (vii)Internal wiring of the Panel suitable copper flat 7/20mm2 SC FR copper cable with colour. (viii)Fixing charges of Panel with RCC foundation base with MS Angle nuts & bolts. (ix) 100Amp TPN Cu. busbar-1set
1
69101
69101
PH WORKS
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC/GI pipes conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge
In Ground Floor
20mm dia CPVC pipe
10
2729
272.9
25mm dia CPVC pipe
22
7946
361.2
32mm dia UPVC pipe
80
42720
534
In First Floor
20mm dia CPVC pipe
10
2841
284.1
25mm dia CPVC pipe
22
8192
372.4
In Second Floor
32mm dia UPVC pipe
60
25668
427.8
40mm dia UPVC pipe
40
20828
520.7
Supplying all materials, labour, T&P and cutting hole in brick of stone masonry wall for taking GI pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of the Engineer in charge.
In Ground Floor
6
366
61
In First Floor
6
373
62.2
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge.
In Ground floor
25
5180
207.2
In First floor
25
5350
214
Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge
15 mm dia CP LB Bib cock (Jaquar)FLR-CHR-5037N
2
3297
1648.7
15mm dia CP angle stop cock(Jaquar)CON-CHR-053KN
18
15503
861.3
15mm dia CP long neck pillar cock(Jaquar)FLR-CHR-5011N
6
10335
1722.6
15 mm dia CP two way Bib cock(Jaquar)FLR-CHR-5041N
4
8563
2140.9
15mm CP Health faucet(Jaquar)ALD-CHR-573
4
6398
1599.5
15mm dia CP flange
34
1370
40.3
15mm dia CP extension piece
34
2016
59.3
25mm dia brass or gun metal fullway valve(Shakti Make)
4
3772
943.1
32mm dia brass or gun metal fullway valve(Shakti Make)
4
5525
1381.3
40mm dia brass or gun metal fullway valve(Shakti Make)
2
3495
1747.7
15mm dia CP Wall Mixture(Jaquar)FUS-CHR-29217
4
16733
4183.4
15mm dia CP Revolving shower(Jaquar)OHS-CHR-1989+SHA-CHR-477
4
8071
2017.9
Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge
2000litre capacity water storage tanks (Sintex/Supreme/Oriplast)(In 2nd. Floor)
2
78632
39316
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge
110mm dia U-PVC SWR pipe(Supreme/Ashirvad)
95
46825
492.9
110mm U-PVC Door Tee
12
4632
386
110mm U-PVC Door Bend
12
3523
293.6
110mm dia U-PVC plain shoe bend
10
2320
232
110mm U-PVC 'P' trap
4
1989
497.3
110mm dia U-PVC cowl
4
232
58.2
110mm dia U-PVC offset
6
2444
407.4
125mm Dia CP Grating
6
561
93.5
Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge
In Ground Floor 250mm to 375mm thick wall
4
949
237.4
250mm to 375mm thick wall
4
949
237.4
supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge.
10 litres capacity PVC LL cistern (Slimline-Deluxe-white-Parryware/Sanituf)
1
1638
1638.6
Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge
European water closet with ‘P’ trap plain (Parryware/Hindware).
1
2743
2743.7
Single Piece European water closet(Hindware)92053
3
76570
25523.5
Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make), etc all complete as per specification and direction of the Engineer in charge
Size 550mmx460mm Basin with porcelain pedestral
4
16420
4105
Table top Basin(Hindware)91067
2
10020
5010.2
Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge
Big size mirror- 0.75x0.60x6=
2.7
5029
1862.8
Supplying all materials,labour,T&P and fixing standard sized Glass-shelf with C.P brass bracket and guard rail complete fixed to wooden pluges with screw etc.all complete as per specification and direction of Engineer-in-charge. 600mmx460mmx200mm size glass shelf(Jaquar )CAN-CHR-1171N
4
5020
1255
600mmx125mm size glass shelf with C.P gruard rail
2
1339
669.5
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
CP towel rail (Jaquar)CAN-CHR-1101N
4
4724
1181.2
CP towel ring (Jaquar)AHS-CHR-1551
6
8268
1378.1
Supplying all materials, labour, T&P and fixing CP Soap Holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
CP Soap Dish holder (Jaquar)CAN-CHR-1131N
6
3838
639.8
Supplying all materials, labour, T&P and providing Vetrified mat finish tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc all complete as per direction of the Engineer in charge(Ceramic tile size 600cmx600cm of Kajaria-Fogparla or equivalent make to pre-approved by the Engineer-in-charge)
In Ground Floor =
8
9024
1128
In First Floor
8
9109
1138.7
Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge(wall tile size 450mmx300mm of Kajaria/Somany/Johnson/Orient bell to pre-approved by the Engineer-in-charge)
In Ground Floor =
30.79
30398
987.3
In First Floor =
30.79
31008
1007.1
Supplying all materials, labour, T&P and fixing granitge tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge(wall tile size 45cmx30cm of Kajaria/Somany/Johnson/Orient bell to pre-approved by the Engineer-in-charge)
8.58
23149
2698.1
Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
0.78
3859
4948.4
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per direction of the Engineer in charge.
2.34
1054
450.6
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
0.39
2737
7018.7
In first floor
0.78
5806
7444.5
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
30.79
5951
193.3
In first floor
30.79
6093
197.9
Supply of all materials & laying the waterproofing material Pidifin 2K of Dr.Fixit on equivalent water proofing material after drying cleaning the concrete surface over the concrete floor/roof/ balcony/sunken and dado upto 1"6" in wall including cleaning,applying and mending as per specification including cost,conveyance,taxes,royalities of all materials to work site etc.all complete as per the direction of the Engineer-in-charge.
14.41
3573
248
12 mm thick cement plaster (1:4) over brick work with cement punning for skirting.
7.81
1604
205.5
Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 650kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. (Rajshri plastiwood/Alstone/Aramstrong or equivalent as per direction of Engineer-in-charge)
6.3
21612
3430.6
Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, KB brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge
Inside size 250mmx250mm
3
5003
1667.9
Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class KB brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
Inside size 760mmx760mmx460mm
4
40922
10230.5
Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
Man hole chamber Inside size 910mmx910mmx910mm
2
39803
19901.8
Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Brick masonry soakway pit 1.20m dia x 2.00m deep
2
38366
19183.4
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3 (0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.
110mm dia u-pvc pipe alround concrete
35
43277
1236.5
160mm dia u-pvc pipe alround concrete
40
80724
2018.1
Construction 1 nos 30 users RCC Septic tank
Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.
11.87
3462
291.7
- do - with addl. Depth of 1.5 m
4.75
1487
313.2
Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge
0.79
355
450.6
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
0.79
3909
4948.4
Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
6.11
47070
7703.8
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
For Roof slab
5.36
4039
753.6
For RCC wall
41.42
49132
1186.2
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
In ground floor
4.58
42795
9344
Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
24.51
6019
245.6
Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge
110mm dia UPVC Tee
2
819
409.6
Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
5
1402
280.5
Supplying all materials, labour,T&P and providing Vent base in cement concrete(1:2:4) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
1
203
203.1
Supplying all materials, labour, T&P and fitting and fixing UPVC SWR soil waste ventilating pipes and fittings to walls with nails, bobbins and wooden plugs or laying in trenches including earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. 110mm diameter U-PVC SWR pipe
1.8
887
492.9
110mm dia U-PVC Plain shoe bend
1
232
232
110mm dia U-PVC Cowl
1
58
58.2
Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
200mmx150mm Large Tube Well through DTH method.- 1 Nos.
3.14
508
162.1
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
Drilling of 200mm dia bore 0mtr to 30mtr =
30
23478
782.6
Drilling of 200mm dia bore 31mtr to 45mtr =
15
11739
782.6
Drilling of 150mm dia bore 41mtr to 120mtr =
80
62608
782.6
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
Lowering of 200mm dia GI/P.V.C/MS casing pipes 0 mtr to 30 mtrs x2=
30
5415
180.5
Lowering of 200mm dia GI/P.V.C/MS casing pipes 31 mtr to 45 mtrs x2=
15
2707
180.5
Cost of 200mm dia P.V.C schedule-80 pipe =
45
79902
1775.6
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
By DTH/Rotary Rig
1
6586
6586
Supplying all materials and labour,tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level(as per drawing)to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock the bottom to ensure sanitary sealing(excluding cost of cement which willbe supplied by the Department).
Sanitary sealing upto 5mtrs below ground level.
1
1173
1173.1
CC(1:2:4)with 12mm chips for grouting upto 5 mtr.Depth in sanitary sealing.
0.4
2807
7018.7
Supplying submerssible pump with sqirrel cage induction type submersible type submerssible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034 - 2002 with following specifications
1.50H.P single phase submersible pump set (KP4-03215 pumpset CP)Kirloskar/Crompton make)
2
30400
15200
DOL controll pannel
2
7611
3805.5
2.50sqmm cable
160
20496
128.1
32mm dia steel short piece
2
304
152.3
Steel rope with cover
80
2136
26.7
Well cap
1
152
152.3
50mm size CI bracket
2
182
91.3
25 mm PVC ASTM pipes
80
15312
191.4
Labour charges for lowering of subersible pumpset with pipes and cables etc.with testing and commissioning at site.
2
4000
2000
Supplying all materials, labour, T&P and constructing Bore well protection chamber of the inside size 650x650x1000hight with cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ash brickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:4) inside and outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.
Bore well protection chamber.
1
11791
11791.9
CONSTRUCTION OF 10,000 LTR RCC SUMP
Earthwork in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to minimum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer in charge. Initial lift
18.37
5358
291.7
Earthwork in excavation of foundation in stonety earth mixed with gravel within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to minimum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer in charge.
8.58
3007
350.5
Supplying all materials, labour, T&P and providing filling sand including watering, ramming and conveyance of all materials to site.
10.21
4600
450.6
Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site.
1.26
6699
5316.8
Supplying all materials, labour,T&P and providing cement concrete (1:1.5:3) for RCC work using 12mm HG chips including hoisting,laying,curring and conveyance of all materials to site etc complete.
6.78
52231
7703.8
Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage.
6.78
63352
9344
Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor.
RCC walls
11.31
8523
753.6
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:3) including watering,curring and conveyance of all materials to site.
Inside portion
47.08
9623
204.4
Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site.
24.2
975
40.3
Supplying all materials, labour, T&P and futting and fixing 20mm dia MS/CI step iron including supply of necessary C.C(1:2:4) for fixing etc complete as per P.H.D. specification.
10
2805
280.5
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements