Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 6,53,700Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_EICCL_104303_1Bid Award Id
ViewTender No
CCEKC - 09 / 2024-25Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Detailed Tender Call Notice
BOQ Items
Filling foundation and plinth with excavated earth ramming etc complete as per approved drawing and technical specifications complete in all respect & as per direction of the Engineer-in-Charge.
693.45
112394
162.08
Supplying, diluting and preparing chemical emulsion like Imidacloprid 30.5 % SC or other chemicals approved by Central Insecticides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as Pre-Constructional Anti-termite Treatment confirming to IS 6313 (Part-II) and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding the pipes and conduits etc. at the rate of 7.5 liters per sqm on vertical surface and 5.0 liters per sqm on horizontal surfaces, 50% of the emulsion to be filled in the holes made in trenches at 150mm center to center (or as directed by the manufacturer) including the cost of all materials, cost of all labour, conveyance, loading, unloading, T&P, etc. all complete as per the direction of Engineer-in-Charge.
-
-
-
( The payment shall be made on the basis of actual plinth area of the building at ground floor and vertical faces will not be measured for payment). Note- The contractor shall have to furnish Ten (10) years guarantees to maintain the anti-termite treated area / structure free from termite. In addition to the 10 years guarantee furnished as above, the contractor shall have to furnish ten years (after certificate of final completion) Bank Guarantee Bond issued by any Nationalized Bank executed in favour of the client as directed in the prescribed proforma available in the tender document for an amount of 10% (ten percent) of cost of this item of work.
1125
117562
104.5
Providing and laying plain cement concrete (1:4:8)(using branded cement) in foundation & floor using 40 mm size hard crusher broken granite chips of approved quality from approved quarry including mixing, lowering, laying and compacting to proper thickness, watering and curing for the required period including cost of all material, labour, conveyance, loading and unloading, taxes, cess,royalties, scaffolding, watering, curing, sundries, tools and plants,etc. ,complete as per the direction of the Engineer-in-charge.
128.58
799552
6218.33
Providing and laying plain cement concrete (1:3:6)(using branded cement) in foundation using 40 mm size hard crusher broken granite metal of approved quality from approved quarry including mixing, lowering, laying and compacting to proper thickness, watering and curing for the required period including cost of all material, labour, conveyance, loading and unloading, taxes,cess, royalties, scaffolding, watering, curing, sundries, tools and plants,etc. ,complete as per the direction of the Engineer-in-charge.
92.27
608068
6590.1
Fly Ash brick masonry in cement mortar (1:6) (Using Branded Cement) in foundation & plinth using Fly Ash bricks of 25x12x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per specification & direction of Engineer-in-charge.
3.39
18548
5471.48
Providing Fly Ash brick masonry work in super structure using 25 X 12 X 8 cm (with dimensional tolerance of ± 2% ) Fly Ash bricks having crushing strength not less than 75 kg. / sq cm, mortar of mix 1:6 (1 cement : 6 sand),(using branded cement) immersing the bricks for minimum 6 hrs in water before use, with all necessary projections, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, watering, curing, sundries, tools and plants,etc., complete as per the direction of the Engineer-in-charge.
-
-
-
a) Ground Floor
189.56
1044412
5509.81
b) 1st Floor
181.46
1066817
5879.08
c) 2nd Floor
170.91
1077372
6303.74
d) 3rd Floor (Head Room)
53.01
360049
6792.1
Fly Ash brick masonry in cement mortar (1:4) (Using Branded Cement) in super structure using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per specification & direction of Engineer-in-charge.
-
-
-
a) Ground Floor
20.07
114875
5723.73
b) 1st Floor
18.18
110770
6093
c) 2nd Floor
19.29
125725
6517.66
Providing lifting , hoisting and laying Reinforced Cement Concrete of M 25 grade(using branded cement) to the following structural member or in places as shown in the drawing for all floors with 20 mm and down graded size hard crusher broken granite chips of approved quality from approved quarry including mixing and vibro compacting to proper shape and size, level and plumb and finishing the exposed surfaces smooth (if required by grouting / providing plaster with cement mortar 1:4 wherever necesary without any extra cost) scaffolding, including watering and curing for the required period including providing strong, rigid, levelled and plumbed centring and shuttering to required shape and size, for floors with wood/Steel centring materials, with all necessary bracing and ties and supports pockets for electrical conduits, pipes, PH pipes, for hooks or boxes, switchboards and insert plates, clamps and extension bars, etc, including dismantling the same after the required interval from the date of casting, including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, watering,curing, sundries. tools and plants etc. complete as per direction of the engineer-in-charge, but excluding cost of steel reinforcement.
-
-
-
i) R.C.C Column Base & Footing
737.55
5440758
7376.8
ii) R.C.C Plinth Beam
44.12
363649
8242.28
iii) R.C.C Column & Beam in Superstructure
-
-
-
a) Ground Floor
80.5
1327822
16495.72
b) 1st Floor
58.14
1076334
18512.8
c) 2nd Floor
51.78
1083617
20927.34
d) 3rd Floor (Head Room)
11.63
277002
23817.94
iv) R.C.C Lintel
-
-
-
a) Ground Floor
15.47
231736
14979.72
b) 1st Floor
14.48
241723
16693.6
c) 2nd Floor
13.1
245550
18744.3
d) 3rd Floor (Head Room)
0.81
17170
21198.3
v) R.C.C Chajja (6.5 cm average thick)
-
-
-
a) Ground Floor
34.38
43673
1270.31
b) 1st Floor
33.35
48144
1443.6
c) 2nd Floor
27.95
46150
1651.17
d) 3rd Floor (Head Room)
1.76
3343
1899.83
vi) R.C.C Stair case
-
-
-
a) Ground Floor
6.28
102820
16372.63
b) 1st Floor
6.28
115332
18365.09
c) 2nd Floor
6.28
130310
20750.09
vii) R.C.C Roof Slab
-
-
-
a) Ground Floor
153.69
2234910
14541.68
b) 1st Floor
135.5
2190757
16167.95
c) 2nd Floor
117.83
2134316
18113.52
d) 3rd Floor (Head Room)
6.98
142680
20441.36
Supplying steel i.e. Tor Steel / HYSD Bars from primary producer of SAIL / Tiscon / RINL / JINDAL STEEL / SHYAM STEEL make (grade Fe-500D) including straightening, cutting, bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (Linear measurement will be taken and quantity will be calculated on standard weight of tor steel / HYSD bars for all heights) complete as per specification & direction of Engineer-in-charge.
-
-
-
a) Ground Floor
1337.19
11668369
8726.07
b) 1st Floor
308.71
2703901
8758.71
c) 2nd Floor
271.87
2390547
8792.98
d) 3rd Floor (Head Room)
32.88
290296
8828.97
Providing 12 mm thick cement mortar 1:6 (1 cement : 6 sand )(using branded cement) to outside surface / plumbed surface of masonry, raking out joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumb and levels and providing grooves or beads where ever necessary, including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, watering. curing, sundries, tools and plants etc. complete as per the direction of the Engineer-in-charge.
-
-
-
a) Ground Floor
555.72
102758
184.91
b) 1st Floor
549.26
104068
189.47
c) 2nd Floor
472.88
91823
194.18
d) 3rd Floor (Head Room)
444.12
88388
199.02
Providing 16 mm thick cement plaster with cement mortar of mix (1:6) (Using Branded Cement) with screened and washed sharp sand for mortar and finished smooth to the inside rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves or beads where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as per specification & direction of Engineer-in-charge.
-
-
-
a) Ground Floor
1859.88
496513
266.96
b) 1st Floor
1659.16
454261
273.79
c) 2nd Floor
1556.06
436988
280.83
d) 3rd Floor (Head Room)
66.18
19065
288.08
Providing 6 mm thick cement plaster (1:4)(1 cement : 4 sand ) (using branded cement)to RCC surfaces finished smooth including closed deep chiping and slury treatment., raking out joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumb and levels and providing grooves or beads where ever necessary, including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, watering. curing, sundries, tools and plants etc. complete as per the direction of the Engineer-in-charge.
-
-
-
a) Ground Floor
785.13
162333
206.76
b) 1st Floor
685.13
145322
212.11
c) 2nd Floor
591.47
128715
217.62
d) 3rd Floor (Head Room)
39.9
8909
223.3
Supplying, fitting and fixing vitrified tiles of premium grade having thickness 10mm confirming to IS 13755 of size 600mm x 600mm Colour printed series (homogenious) of approved make a shade (Orient Bell, Somany, Kajaria, Johnson) in floors on 20mm thick bed of C.M. (1:4) (Using Branded Cement) and filling the joint with white cement mixed with pigment to match the shades of the tile including washing and cleaning with oxalic acid complete including cost of all materials, taxes, labour, labour cess, T&P etc. required for the work complete in all respect as per specification & direction of Engineer-in-charge.
-
-
-
a) Ground Floor
523.72
592039
1130.45
a) 1st Floor
597.89
683758
1143.62
b) 2nd Floor
504.23
583621
1157.45
Providing, fitting, fixing vitrified tiles of premium grade having thickness 10mm confirming to IS 13756 of size 600mm x 600mm Colour printed series (homogenious) of approved make (Orient Bell, Somany, Kajaria, Johnson) in dados skirting and risers of steps on 12mm thick cement plaster (1:3) (Using Branded Cement) jointed with neat cement mixed with pigment to match the shades of the tiles including washing and cleaning with oxalic acid and polishing etc. complete with cost, conveyance, royalties and taxes of all materials all labour,labour cess complete in all respects as per specification & direction of Engineer-in-charge.
-
-
-
a) Ground Floor
72
90817
1261.36
b) 1st Floor
75.53
96767
1281.18
c) 2nd Floor
69.14
90019
1301.99
Providing Granite Tiles of sizes Above 0.40 Sqm. (20mm thick) of approved make and shade, dressed, rubbed and polished, bottom coated with neat cement slurry in Stair case, Tread, Riser, Landing, Kitchen Slab Floors fixed with neat cement slurry, over 25 mm thick cement mortar (1:1)(1 cement : 1 sand) (Using Branded Cement) to masonry or concrete surfaces to proper level / slope and joints filled with cement mixed with matching colour in required proportion, polishing, washing and acid cleaning, including cost of all materials, conveyance, royalties, taxes, cess, labour, scaffolding, watering, curing, sundries, T&P etc. complete as per the direction of the Engineer-in-charge.
-
-
-
a) Ground Floor
71.68
208312
2906.15
b) 1st Floor
29.7
86703
2919.32
c) 2nd Floor
29.7
87114
2933.15
Providing Kota tiles of sizes above 0.10 sqm having minimum thickness 16mm of approved make and shade, dressed, rubbed and polished, bottom coated with neat cement slurry in floor ,treads or steps and landing fixed with neat cement slurry, over 25 mm thick cement mortar (1:1)(1 cement : 1 sand) (Using Branded Cement) to masonry or concrete surfaces to proper level / slope and joints filled with cement mixed with matching colour in required proportion, polishing, washing and acid cleaning, including cost of all materials, conveyance, royalties, taxes,cess, labour, scaffolding, watering, curing, sundries, T&P etc. complete as per specification & direction of the Engineer-in-charge.
-
-
-
a) Ground Floor
170.22
178620
1049.35
b) 1st Floor
31.29
33246
1062.52
c) 2nd Floor
31.29
33678
1076.35
Supplying, fitting and fixing Industrial vitrified tiles in floor treads or steps and landing of premium grade having thickness 8mm to 10mm of size 300mm x 300mm confirming to IS 4457 of approved make on 20mm thick bed of C.M. (1:4) (Using Branded Cement) including cost of all materials, taxes, cess, labour, T&P etc. required for the work in all respect as per specification & direction of Engineer-in-charge.
-
-
-
a) Ground Floor
35.8
37446
1045.98
Supplying & fitting, fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutter and all fitting and fixtures etc. including cost & conveyance of all materials acessories labour charges, Cess, taxes of all materials & product conforming to ASTM D 638-14 EN-477-95 and other applicable codes and standards.
-
-
-
a) Ground Floor
88.65
444187
5010.58
b) 1st Floor
82.44
413072
5010.58
c) 2nd Floor
66.24
331900
5010.58
d) 3rd Floor (Head Room)
2.43
12175
5010.58
Providing fitting, fixing of Al. door with anodized Al. door section of 9202 as vertical member, 9201 as top and 9200 as middle and bottom member with frame section no 9221 and tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour,T&P, hire charges of drilling machine,labour charges ,making good to all damages in walls and floors etc. including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, sundries, tools and plants etc. complete as per the direction of the Engineer-in-charge.
-
-
-
a) Ground Floor
8.4
64165
7638.74
b) 1st Floor
4.2
32082
7638.74
Providing, fitting, fixing Dressed seasoned sal wood work framed and fixed (wrought and putup) confirming to IS specification & as per drawing & design, fixed to walls & colums with grouted clamps in frames of doors & windows, ventilabours in all floors including cost,conveyance royalities & all taxes of all materials and cost of labour for fitting, cess, fixing etc.complete as per specification & direction of Engineer-in-Charge .
-
-
-
a) Ground Floor
1.07
104454
97895.33
b) 1st Floor
0.88
86147
97895.33
c) 2nd Floor
0.88
86147
97895.33
Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fitting and fixture complete etc including cost of all materials, hardware fittings, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, sundries, tools and plants etc. complete as per the direction of the Engineer-in-charge.
-
-
-
a) Ground Floor
44.94
484241
10775.3
b) 1st Floor
37.38
402780
10775.3
c) 2nd Floor
37.38
402780
10775.3
Supplying, Fitting & Fixing M.S. Window Grill made out of MS Angle (30x30x5) mm frame with MS Flat (19x5) mm size confirming to IS Specification hold Fast with MS Angle (30x30x5)mm size (each side = 2 nos) - 4 nos of 150mm length bifurcated tips at the top to be fixed with Cement Concrete (1:3:6) including drilling holes in walls priming the grill with red oxide primer including cost ,conveyance, taxes of all material, labour ,cess required for the work complete as per the direction of the Engineer-in-charge.
-
-
-
a) Ground Floor
2659.5
166351
62.55
b) 1st Floor
2139.75
133841
62.55
c) 2nd Floor
1813.5
113434
62.55
d) 3rd Floor (Head Room)
167.4
10470
62.55
Finishing wall surface with one coat Priming with cement primer (water bound) to make an even finished surface to receive painting in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in-charge.
-
-
-
a) Ground Floor
3200.73
224883
70.26
b) 1st Floor
2893.55
208596
72.09
c) 2nd Floor
2620.41
193831
73.97
d) 3rd Floor (Head Room)
550.2
41765
75.91
Finishing wall surface with painting two coats with Weather coat paint (1st quality) exterior grade of approved make & approved shade to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cess, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge.
-
-
-
a) Ground Floor
287.13
28529
99.36
b) 1st Floor
274.63
27874
101.5
c) 2nd Floor
236.44
24516
103.69
d) 3rd Floor (Head Room)
444.12
47058
105.96
Finishing wall surface of walls with Acrylic wall putty of approved make and finished smooth and even surface to receive painting including cost of scaffolding & staging charges with,cost of all materials, taxes, cess, labour, conveyance, royalties, watering, curing, tools and plants, etc. complete, as per the direction of the Engineer-in-charge.
-
-
-
a) Ground Floor
2645.01
221334
83.68
b) 1st Floor
2344.29
200507
85.53
c) 2nd Floor
2147.53
187758
87.43
d) 3rd Floor (Head Room)
106.08
9482
89.39
Providing and applying painting over the plastered surfaces with 2 coats of Plastic emulsion paint of approved quality and shade, using the required quantity of Plastic emulsion paint as specified by the manufacturer to give an even shade including cost of all materials, labour, conveyance, taxes, cess, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge.
-
-
-
a) Ground Floor
2645.01
281323
106.36
b) 1st Floor
2344.29
254355
108.5
c) 2nd Floor
2147.53
237710
110.69
d) 3rd Floor (Head Room)
106.08
11982
112.96
Painting two coats with Synthetic enamel paint of approved quality and shade on surfaces as specified below Steel Surface) to give an even shade with 2 coats of approved quality paint, including cost of all materials, labour, conveyance, taxes, cess, royalties, scaffolding. watering, curing, sundries. tools and plants, etc., complete as per the direction of the Engineer-in-charge.
-
-
-
a) Ground Floor
121.5
22513
185.3
b) 1st Floor
85.59
16259
189.97
c) 2nd Floor
79.79
15541
194.78
d) 3rd Floor (Head Room)
9.6
1917
199.73
Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, cost of all labour,labour cess, T&P etc. required for the work complete in all respect as per specification & direction of the Engineer-in-charge.
-
-
-
a) Ground Floor
59.74
16678
279.18
b) 1st Floor
59.74
16678
279.18
c) 2nd Floor
59.74
16678
279.18
Providing and applying two coats unitile's Royal/Rivera make in approved shade on a smooth cement sand plaster. The composition of the texture paint should consist of Acrylic Copolymer Resigns combined with Quartz, Silica,mineral aggregates, synthetic inorganic pigments, bactericide, fungicides and various other additives,giving the product water repellant properties. The first coat to be applied by brush or wool roller as a base coat, diluted with sufficient water and the final coat applied undiluted with trowel and then finished with acrylic trowel to obtain the specified grooves.The thickness of both coats dhould be 1.0 to 1.5 mm. The water repellency of the product is 86gm/m2 as per test method IS: 5410-1969.
-
-
-
a) Ground Floor
268.59
109584
408
b) 1st Floor
274.63
112049
408
c) 2nd Floor
236.44
96467
408
Providing and fixing Glass Reinforced Concrete (G.R.C) Screens in approved size, pattern, design, shadeand thickness of 50mm on frame and design element in 30mm thick have weight approximately between 3.5 – 4 Kg per Sq. Ft. and color of M/S UniStone make or equivalent. The above weight and thickness is considering dimensions of screens up to 2133mm in height and 1219mm in width and having at least 50% void space. The screens should be made from ‘53 grade’ White Portland Cement manufactured by ‘JK Cement’ or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by ‘N.E.G JAPAN’ or equivalent, Super Plasticizers manufactured by ‘BASF’ or equivalent, Polymers manufactured by ‘BASF’ or equivalent and U.V resistant Synthetic inorganic pigments should be used for pigmentation manufactured by ‘BAYFERROX (Germany)’ or equivalent. The material casting should take place in FRP Molds. The fixing of Screens should be ‘Dry fixing’ i.e. to be done with M.S Galvanized Clamps, fixtures and fasteners of Hilti / Fischer.
-
-
-
a) Ground Floor
6
35572
5928.7
b) 1st Floor
18
106716
5928.7
c) 2nd Floor
18
106716
5928.7
Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) (Using Branded Cement) using 4.7mm size hard granite crusher broken chips and screened & washed sharp sand and finished smooth to the rough surface of roof slab including watering and curing with cost, conveyance, royalties and taxes of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as per specification & direction of Engineer-in-charge.
-
-
-
a) 3rd Floor (Head Room)
855
449046
525.2
Providing and installing two component acrylic modified cementitious waterproofing coating over roof slab after carrying out pond test on roof slab, filling all defects, saturating the surface, mixing the products and then application in 2.0 mm thickness (1.8 Kg / sqm coverage rate for 1.0 mm thickness) in suitable layers complete in all respect, all materials, tools, plant & labour complete in all respect. Density 1850kg/m³ , Mix ratio (Powder to liquid) 3:1 by weight ,Water penetration Din 1048 1.5 Bar no leakage Potlife @ 25°C 2 hours & @ 40°C 30 minutes,Recoatable: 8-12 hours Elongation 42% (air) & 31% (under water),Tensile strength 20 kg/cm2 ,VOC content (HK prod code P10-17) 0.5 g/L including cost of all materials, conveyance, taxes and sundries,T&P, watering and curing by ponding water over terrace slab etc. complete as per the direction of the Engineer-in-charge.(Make:BASF/Fosroc/SIKA/MAPEI/MYK)
-
-
-
a) 3rd Floor (Head Room)
855
397233
464.6
Supplying, Fitting & Fixing M.S. Collapsible Gate / MS Grill Gate made out of MS Angle (30x30x5) mm and MS Flat (19x5) mm size confirming to IS Specificationfabricating hold Fast with MS Angle (30x30x5)mm size of 150mm length bifurcated tips at the top to be fixed on wall with Cement Concrete (1:3:6) including drilling holes in walls & priming the Collapsible Gate / MS Grill Gate with red oxide primer including cost ,conveyance, taxes of all material, labour ,cess required for the work complete as per the direction of the Engineer-in-charge.
-
-
-
a) Ground Floor
315
19800
62.86
Supplying ,fitting and fixing of ISMB Sections for cow catcher (6.4m x 1.5m) including labour for lifting,hoisting and placing in position to required size and length ,pre fabricating by cutting to sizes,priming including cost of all materials,cost of all labour,loading,unloading at site,all accessories,T&P required for the work complete in all respect as directed by Engineer in Charge.
-
-
-
Cow-Catcher at entrance Gate
152.4
12512
82.1
Providing ,Supplying & Fixing of 150mm dia heavy gauge G.I. Pipe for cow catcher (6.5mX1.5m) including labour for lifting,and placing in position to required length,pre fabricating by cutting to required length,priming including cost of all materials, cost of all labour,loading,unloading at site ,all accessories,T&P required for the work complete in all respect as directed by Engineer in Charge.
-
-
-
Cow-Catcher at entrance Gate
60
106358
1772.64
P.H WORKS (PART-II)
-
-
-
Internal PH. Works
-
-
-
Supplying all materials , labour, T&P and providing and fixing to wall or ceiling and floor PVC pipes conforming to ASTM-D-1785/89 ( Sch-80 ) and G.I pipe fittings of the following nominal bore with clamps including making good the wall,ceiling and floor ,testing all complete as per P.H. specification and direction of Engineer-in-charge
-
-
-
In Ground floor
-
-
-
20mm dia C- PVC Pipe
90
27225
302.5
25mm dia C- PVC Pipe
95
38380
404
32mm dia C- PVC Pipe
105
61015
581.1
In First floor
-
-
-
20mm dia C- PVC Pipe
50
15685
313.7
25mm dia C- PVC Pipe
55
22836
415.2
32mm dia C- PVC Pipe
60
35640
594
In Second floor
-
-
-
20mm dia C- PVC Pipe
50
16250
325
25mm dia C- PVC Pipe
55
23457
426.5
32mm dia C- PVC Pipe
60
36414
606.9
In Terrace floor
-
-
-
40mm dia PVC ASTM pipe (sch-80)
150
63540
423.6
50mm dia PVC ASTM pipe (sch-80)
250
131575
526.3
Supplying all materials,labour,T&P and cutting holes through existing brick work including making good the damages in cement mortar(1:4) for taking GI pipes and fittings/PVC pipes and fittings etc.all complete as per PH specification and direction of the Engineer-in-charge.
-
-
-
250mm thick wall
-
-
-
In Ground floor
18
1117
62.1
In First floor
14
884
63.2
In Second floor
14
901
64.4
In Terrace floor
6
395
65.9
Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge
-
-
-
In Ground floor
9
1925
213.9
In First floor
7
1505
215
In Second floor
7
1512
216.1
Supplying all materials , labour, T&P and cutting grooves in pucca floors and walls for taking P.V.C pipes and G.I fittings etc. and making good the damages including finishing complete as per P.H. specification and direction of Engineer-in-charge
-
-
-
In Ground floor
90
20934
232.6
In First floor
50
11975
239.5
In Second floor
50
12360
247.2
Supplying all materials , labour, T&P and fitting and fixing brass/CP fittings of following nominal bore with supply of all jointing materials complete as per P.H. specification and direction of Engineer-in-charge
-
-
-
15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)
60
51678
861.3
15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make)
41
59527
1451.9
15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make)
1
1255
1255
15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make)
1
1648
1648.7
20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make)
21
23772
1132
15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make)
21
24288
1156.6
25mm dia. Brass Full Way Valve ( Shakti make )
15
18178
1211.9
32mm dia. Brass Full Way Valve ( Shakti make )
15
26613
1774.2
40mm dia. Brass Full Way Valve ( Shakti make )
11
28076
2552.4
50mm dia. Brass Full Way Valve ( Shakti make )
8
26676
3334.5
15mm dia. C.P extension piece
124
6522
52.6
125mm dia CP gratting
48
4180
87.1
15mm dia. C.P flange
124
9597
77.4
Supplying all materials ,labour ,T&P and fitting and fixing CP shower with 15mm or 20mm inlet including polishing etc.all complete as per specification and direction of Engineer-in-charge
-
-
-
½” x 5” CP Shower (Plaza Deluxe Make)
21
11136
530.3
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 80 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 80 liter's along with 3 noa of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge
-
-
-
Aquaguard Cooler-cum-Purifier Pure Chill 80 PSS UV
3
336732
112244
Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 2.60m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge
-
-
-
In the third floor
-
-
-
2000 ltrs capacity rotational moulded polyethylene cylindrical vertical water storage tank
12
589208
49100.7
Supplying all materials,labour,T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No.13592/1992 to walls with nails,bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification,testing,earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of Engineer-in-charge
-
-
-
110mm dia. U-PVC SWR pipes(Ori-plast make Type-B)
252.03
129669
514.5
110mm dia. U-PVC "P" trap
48
23870
497.3
110mm dia. U-PVC door bend
45
13212
293.6
110mm dia. U-PVC plain bend
40
9280
232
110mm dia. U-PVC offset without ear
8
3259
407.4
110mm dia. U-PVC vent cowl
8
465
58.2
110mm dia. U-PVC plain tee
35
11294
322.7
110mm dia. U-PVC door tee
7
2702
386
110mm dia. U-PVC plain shoe bend
8
1856
232
110mm dia. U-PVC door cross tee
6
3307
551.2
110mm dia. U-PVC Socket
50
8005
160.1
Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC / HCI pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
-
-
-
250mm to 375mm thick wall
50
11795
235.9
Supplying all materials , labour, T&P and cutting of RCC roof or cornice for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
25
5225
209
Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
15
2218
147.9
Supplying all materials , labour, T&P and fixing Vitreous china water closet ,squatting pan ( Indian type W.C. pan / Orissa pattern squatting pan ) duly embedded in cement concrete 1:5:10 using hard granite metal 4cm nominal size including fixing a pair of vitreous china 250mmx130mmx30mm foot rest, fixing 100mm dia hci 'P' or 'S' trap for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
-
-
-
580mmx440mm size Orissa Pan ( White )
20
77198
3859.9
Supplying all materials,labour,T&P and fitting and fixing vitrous Chaina washed down water Closet (European type water closet - EWC) with integral "P" or "S" type trap to the floor including wodden plug and chromoum plated screw including jointing the trap with soil pipe in CM(1:1) fixing plastic seat cover for washed down water closet with crmium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of Engineer-in-charge.
-
-
-
European Water Clost "S" trap(Parryware white)
1
3285
3285.9
Supplying all materials ,labour ,T&P and fixing 10 litres capacity PVC low level flushing cistern with a pair of PVC brackets complete with fittings such as pvc siphonic arrangements, 15mm dia nominal size pvc ball valve with polythene float ,pvc handles, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet , and connecting the inlet pipe with supply main etc.all complete as per specification and direction of Engineer-in-charge
-
-
-
10 ltrs. capacity PVC low level cistern (Slimline- Deluxe-white-Parryware make)
21
49679
2365.7
Supplying all materials ,labour ,T&P and fixing wash kitchen sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste , fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc. including cutting holes in walls and making good the damages etc.all complete as per specification and direction of Engineer-in-charge
-
-
-
600x450x250 mm stainless steel Laborotory sink ( Jayna make)
1
5902
5902.4
Supplying all materials,labour,T&P and Bowl pattern urinal of the following sizes including connecting the urinal with 32mm dia PVC waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia cp dome west,15mm dia cp spreader including cutting holes in wall and making good the damages with supply of wooden plugs,screws and cement etc. all complete as per specification and direction of the Engineer-in-charge.
-
-
-
Half stall urinal .(Parryware make)
12
70734
5894.5
Supplying all materials ,labour ,T&P and fixing Wash basin with hole for pillar taps with cast iron or MS brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. fixing pedestral for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin , fixing 12mm dia CP brass waste etc.all complete as per specification and direction of Engineer-in-charge.
-
-
-
550mmx400mm size wash hand basin(Parryware white)
3
12000
4000
Under Counter basin(560x450)Hindware-No.10095
18
94917
5273.2
Supplying all materials ,labour ,T&P and fixing Mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with chromium plated brass screws and washers etc.all complete as per specification and direction of Engineer-in-charge
-
-
-
600mmx450mm size B.E mirror ( fixed type )
21
16871
803.4
Supplying all materials,labour,T&P and fixing standard sized Glass-shelf with C.P brass bracket and guard rail complete fixed to wooden pluges with screw etc.all complete as per specification and direction of Engineer-in-charge.
-
-
-
600mmx125mm size glass shelf with C.P ruard rail
21
14586
694.6
Supplying all materials ,labour ,T&P and fixing standard sized CP brass towel rail complete with CP brass brackets fixed to wooden plugs with chromium plated brass screws etc.all complete as per specification and direction of Engineer-in-charge
-
-
-
25mmx600mm long CP Towel rail
21
18921
901
C P Towel Ring
22
14258
648.1
Supplying all materials ,labour ,T&P and fixing CP Soap Holder complete with CP brass brackets fixed to wooden plugs with chromium plated brass screws etc.all complete as per specification and direction of Engineer-in-charge
-
-
-
CP soap holder
64
17894
279.6
Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge
-
-
-
In Ground floor
8.17
6656
814.7
Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
-
-
-
In Ground floor
5.44
35987
6615.4
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
-
-
-
In Ground floor
5.44
44289
8141.5
In First floor
4.38
37524
8567.3
In Second floor
4.38
39670
9057.1
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
-
-
-
In Ground floor
272.36
57685
211.8
In First floor
222.14
48048
216.3
In Second floor
222.14
49092
221
Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 30cmx30cm special printed series to be pre-approved by the Engineer-in-charge ).
-
-
-
In Ground floor
54.36
49576
912
In First floor
43.78
40500
925.1
In Second floor
43.78
41109
939
Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 30cmx20cm / 20cmx20cm special plain / printed series to be pre-approved by the Engineer-in-charge )
-
-
-
In Ground floor
272.36
247738
909.6
In First floor
222.14
206456
929.4
In Second floor
222.14
211077
950.2
Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass chopped strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 1.50mm Expanded polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material.Wooden rainforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts,aldrops,handles etc shall be provided. A sturctural adhesive compatible with(EPS) foam shall be used for bending the core material, the sal wood rainforcements and the skins.The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centres standards and specifications and the door shutters tested in conformation to IS:4020-1998. The finish of door shutter will be plain colour using white/Ivory/Beige/Light grey/Mahogany /Teak wood or any other colour using high quality pigments.Three heavy whight mild steel butt hinges typep-I(ISI marked)size 100m are to be fitted on one side of shutter and complete in all respect as per specification and direction of the Engineer-in-charge.
63.73
203936
3200
Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped strand Mat (CSM) U.V stablised Inopthalic Gelcoat and impregnated with Inopthalic resin.The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould.The segments are plugged in and are joined together by means of screw.The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement,six numbers of 260mmx25mmx5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design centre's standards and specifications. The finish of door frame will be plain colour white/Ivory/ Beige/ Light gray/Golden brown/ Mahogany/ Teak wood/Sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer-in-charge.
197.34
112957
572.4
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge
-
-
-
Inside size : 760mmx760mmx460mm
4
44352
11088
Supplying all materials ,labour ,T&P and constructing Man Hole Chamber of inside size 910mmx910mmx910mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken black hard granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing, conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge
-
-
-
Inside size : 910mmx910mmx910mm
2
42951
21475.8
Supplying all materials, labour, T&P & constructing Soak Way Pit of the following size with dry brick walling from bottom upto invert of inlet pipe and KB brick work in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size crusher broken hard black granite metal on bed, 12mm thick cement plaster in cement mortar (1:4) inside and outside over masonry brick work, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips fitted with iron lifting handles including earth work in open well excavation in all kinds of soil and refilling of cavity around the pit and painting the iron works, watering, curing,cost of all materials,conveyance of all materials to worksite, payment of royalty, all taxes etc. all complete as per approved drawing,PH specification and direction of the Engineer-in- charge.
-
-
-
1.40m dia x 2.00m deep inside size Soakway Pit
2
51418
25709.3
Supplying all materials,labour,T&P and laying in trenches ( to level or slope ) unplasticized PVC pipe conforming to IS:4985/2000 of the following outside dia for class-3 (0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/ as per manufactures's providing and laying in trench cement concrete(1:4:8) with 40 mm size hard granite metal in the Type-C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer-in-charge.
-
-
-
110mm dia U-PVC pipe ( Allround concrete )
26
37031
1424.3
160mm dia U-PVC pipe ( Allround concrete )
30
68529
2284.3
Construction of 2 nos. 50 users Septic Tank
-
-
-
Supplying all labour , T&P and earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of Engineer-in-charge
-
-
-
Within initial lead of 50m and initial lift of 1.5m
78
22756
291.75
Supplying all labour , T&P and earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of Engineer-in-charge
-
-
-
Extra lift of 1.50m or part thereof over the initial lift of 1.50m
104
32570
313.18
Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge
15.6
12709
814.7
Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
-
-
-
In ground floor
7.8
51600
6615.4
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
-
-
-
In ground floor
5.2
42335
8141.5
Supplying all materials.labour.T&P and providing brick work with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar(1:4) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge.
32.06
184184
5745
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
101.62
21523
211.8
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
118
23623
200.2
Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge
101.62
4125
40.6
Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge
-
-
-
In ground floor
23.7
17860
753.6
Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.
-
-
-
In ground floor
4.2
37186
8854
Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
4.2
38117
9075.7
Supplying all materials, labour, T&P and fitting and fixing following size SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PH specification and direction of the Engineer-in-charge.
-
-
-
150mmx150mmx150mm size SW Tee
4
2784
696
Supplying all materials, labour, T&P and making MS step Iron in 20mm diameter MS steel bars and fixing into walls of manhole / septic tank duly embedded in cement concrete (1:3:6) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc complete as per specification and direction of the Engineer-in-charge
20
5862
293.1
Supplying all labour, T&P and filling in foundation and plinth with excavated earth including watering and ramming etc. complete as directed by the Engineer-in-charge.
21
3403
162.08
E.I WORKS (PART-III)
-
-
-
INTERNAL WIRING.
-
-
-
Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq) (Make of modular box,cover,switch & socket-Legrand Myrios/schneider Unica Pure/Eq) With 10Years Warenty
-
-
-
Group C
342
417924
1222
Recessed wiring to secondary light point looped from primary light point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer-in-charge. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq) Average Length: 3 mtr
150
69450
463
Recessed wiring to ceiling fan point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch,Stepped type Moudular Regulator, Base & Cover with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq) Group C
186
300762
1617
Recessed wiring to Twin control light point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type 2way switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer-in-charge. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq) Group C
6
9978
1663
Recessed wiring for 5 / 6 amp socket outlet with 6Amp, 250 V clip in type modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection on same switch board as per direction of Engineer-in-charge.
75
42075
561
Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection on separate board as per direction of Engineer-in-charge.(Make of wire Finolex /Polycab/ Anchor / Havels/Eq) Group C
10
13710
1371
Recessed wiring for 2 x 6 amp socket outlet controlled by 2 nos 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge.
140
145180
1037
Recessed wiring for 6 pin 16 amp socket outlet with 16Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer-in-charge.
5
4470
894
Recessed wiring for A.C/ Power socket outlet with industrial type socket outlet, plug top and metal chained cover in sheet steel enclosure ,20A/32A SP MCB including all accesories and connection as per direction of Engineer-in-charge.
12
12864
1072
Recessed wiring to exhaust fan/Wall Fan point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch, Base & Cover with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq) Group C
30
36660
1222
Call bell point
4
5540
1385
Recessed wiring for 3 x 6 amp socket outlet controlled by 2 nos 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge.
1
1166
1166
SUBMAIN.
-
-
-
Recessed wiring to submain in 4 x 10 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 4 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq)
118
55696
472
Recessed wiring to submain in 2 x 6 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 2.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq)
240
54960
229
Recessed wiring to submain in 2 x 4 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq)
350
68250
195
Recessed wiring to submain in 2 x 2.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq)
1680
299040
178
Recessed wiring to submain in 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /Polycab/ Anchor / Havels/Eq) (For Switch Board Looping)
220
36080
164
Distribution Boards
-
-
-
Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required wih necessary MCB , RCCB / ISOLATORS as required.Note for MCB- There should be colour indication for tripping On ,Off & Trip/There should be mid trip position for toggles for electrical fault conditions.(With 5Years Warenty)
-
-
-
Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 4 way TPN Distribution Boards For PDB suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-63A FP MCB (10KA) Outgoings-10/20A SP MCB 10KA-12Nos.(Make-L&T/ Schneider/Legrand/Eq)
9
107028
11892
Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 12 way SPN Distribution Boards For LDB suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-40A DP MCB (10KA) Outgoings-10A SP MCB 10KA-10Nos.(Make-L&T/ Schneider/Legrand/Eq)
9
78453
8717
Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 4 way HTPN Distribution Boards For FLDB suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-80A FP MCB (10KA) Outgoings-40A DP MCB 10KA-6Nos.(Make-L&T/ Schneider/Legrand/Eq)
3
69192
23064
Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 4 way VTPN Distribution Boards For FPDB suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-125A FP MCB (16KA) Outgoings-63A TP MCB 10KA-4Nos.(Make-L&T/ Schneider/Legrand/Eq)
3
98847
32949
CABLE .
-
-
-
Supply & Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of 3.5core 150 sq.mm direct in ground including excavation , sand cushining protective covering and refilling the trench etc. as required.(Make-polycab/RR Kable/Rhino cable/Eq)
55
55825
1015
Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of 3.5core 50 sq.mm direct in ground including excavation , sand cushining protective covering and refilling the trench etc. as required.(Make-polycab/RR Kable/Rhino cable/Eq)
45
28440
632
Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of 3.5core 35 sq.mm direct in ground including excavation , sand cushining protective covering and refilling the trench etc. as required.(Make-polycab/RR Kable/Rhino cable/Eq)
50
21850
437
Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of 4 core 16 sq.mm Aluminium on surface as required.(Make-polycab/RR Kable/Rhino cable/Eq)
82
25584
312
END TERMINATION
-
-
-
Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required.
-
-
-
3.5C x 150 sq.mm
6
3552
592
3.5C x 50 sq.mm
2
826
413
3.5C x 35 sq.mm
8
3192
399
4C x 16 sq.mm
10
2290
229
PANEL
-
-
-
Supply, installation,testing & commissioning of floor mounting front operated front access extensible type cubicle panel totally enclosed, dust and vermin proof with IP-42 /55 protection with hinged and lockabale doors.CRCA sheets including interconnections,tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 35 KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below : All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used with Indication lamp, C.T , Digital Voltmeter, Digital Ammeter and control fuse etc. complete.MAKE- Legrand / Schneider/ L&T/SIEMENS/Eq.
-
-
-
MAIN PANEL with 200A 4P MCCB 50KA -1 No as incomer, 125A 4P MCCB 25KA 4Nos. 125A 4P Change over switch, 80A 4P MCB 25KA 4Nos. , 63A 4P MCCB 10KA 4Nos with E.C Busbars with 4nos 65KA VSD along with 4nos 32A SP MCB.
1
313824
313824
EXT Light DB with 63A 4P MCB (10KA) -1 No as incomer, 1Nos Timer Switch ,20A SP MCB 10KA-12 Nos, 20A DP MCB 10KA 6Nos. as Outgoing with E.C Busbars .
1
25010
25010
PUMP Panel Board with 63A 4P MCB (10KA) as Incomer , Outgoings-32A 4P MAB 10KA-2Nos, 20 A DP MCB 10KA-3Nos, with E.C Busbars.
1
18556
18556
EARTHING
-
-
-
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required.
6
82242
13707
Supplying and laying 25 mm x 6 mm CU earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required.
35
20230
578
Supplying and laying 25 mm x 6 mm CU earth strip ISI marked on surface or in recess for connection etc as required.
35
21945
627
Providing and fixing 8 SWG CU wire on surface or in recess for loop earthing as required.
160
11520
72
Lightning Arrester.
-
-
-
Supply & fixing of lightning arrester of size 2.6' length made of 0.5"diameter copper rod, over which 5nos 5" length pointed copper rods of 0.3" diameter with suitable size of nuts and bolts.
8
20000
2500
Supplying and laying 25 mm x 6 mm CU earth strip ISI marked on surface or in recess for connection etc as required.
140
87780
627
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required.
4
54828
13707
FIXTURE
-
-
-
Supply, Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting /LED fitting of all sizes complete with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required.Make-Bajaj/HALONIX/wipro/JAQUAR/Eq.With 5Years Warenty.
-
-
-
Ceiling mounted indoor type 22W batten type LED Luminaire with LED Lamp Similar to HALONIX Cat No. HLB-03-22-CW-AL-SQ or equivalent make of Bajaj, Wipro,Jaquar/eq.
360
320400
890
Ceiling/ Wall mounted type 10W BULK HEAD Luminaire with Similar to HALONIX Cat No.HLBH-02-10-CW or equivalent make of Bajaj, Wipro,Jaquar/eq.
10
10800
1080
Supply, Installation, testing and commissioning of 10W Mirror Light Similar to HALONIX Cat no-HLB-03-10-CW-AL-SQ/Equivalent make of Bajaj, Wipro,Jaquar/eq..
25
15725
629
Supply, Installation, Testing and Commissioning of ceiling fan 1200mm sweep USHA ENERGIA, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required.Make- USHA/Havells/Crompton/Eq.
186
383160
2060
Supply, Installation, testing and commissioning of exhaust fan of 230 mm sweep AEROCLEAN LD GBD 900 rpm in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required.Make- USHA/Havells/Crompton/Eq.
30
51960
1732
Supply & fixing of 12W LED Down Light (Surface/Recessed) similat to HALONIX Cat no-HLDLR-R21-12-CW-PC/Equivalant With all accessories make of Bajaj, Wipro,Jaquar/eq..
75
61650
822
Supply & fixing of LED 36w 2'x2' Surface/Recessed Mounted Light similar to jaquar cat no-LSVR01S036SW / Equivalent make of Bajaj, Wipro,Jaquar/eq.. etc as required .
25
98100
3924
TV /TEL & DATA
-
-
-
Supplying and fixing of clip in type modular Telephone socket ISI marked mounted on G.I modular box with face plate & cover of suitable size ,including all accesories and connection as per direction of Engineer in Charge.
4
1528
382
Supplying and fixing of clip in type modular T.V. antenna socket ISI marked on mounted on G.I modular box with face plate & cover of suitable size , including all accesories and connection as per direction of Engineer in Charge.
6
2352
392
Supplying and drawing 4 pair, 0.5 sq.mm FR PVC insulated coper conductor, unarmoured telephone cable in existing surface / recessed PVC conduit as required.
86
3870
45
Recessed wiring to television point with cable RG-6 grade, 0.7 mm solid copper conductor PE insulated shielded with fine tined copper braid and protected with FR PVC sheath in in existing surface / recessed PVC conduit as required as per direction of Engineer in Charge.
134
5360
40
Supplying and fixing of following sizes PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20mm
50
6150
123
Supplying and fixing of 16 / 18 SWG metal box of 200 mm x 150 mm x 60 mm deep on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required.
( Tel junction Box)
1
212
212
Supplying & Commissioning of Telephone Hand Set.
4
2936
734
Supplying & installation of 50 pair KRONE make moudles with locking & key arrangements fabricated with MS sheet & powder coated to be fixed on concealed manner incl. good the damages.
1
2500
2500
63-KVA Silent D.G. SET
-
-
-
Supply & delivery of 63-KVA silent DG sets along with engine-alternator, Control panel containing 1 No 125-A, 4P MCCB & required protections and metering arrangement (in tamper proof compartment with locking arrangement) With AMF Panel type with 5-A digital KWH meter & CTs for DG set, etc as required , acoustic enclosure, diesel tank, residential silencer and complete as required as per the technical specification and as per direction of Engineer-in-charge. Make-Kirloskar/jakson/sterlin/eq.
1
855000
855000
Installation, testing and commissioning of 63-KVA silent DG sets along with engine-alternator, Control panel containing 1 No 125-A, 4P MCCB & required protections and metering arrangement (in tamper proof compartment with locking arrangement) with 5-A digital KWH meter & CTs for DG set, etc as required , acoustic enclosure, diesel tank, residential silencer and complete as required as per the technical specification and as per direction of Engineer-in-charge.
1
10000
10000
DG Set Foundation including barbared wire fencing / Roof shade as required.
1
45000
45000
TP Meter Box of 63 KVA DG set
-
-
-
1 No 3 phase 4 wire 5amp CT operated digital KWH meter in tamper proof enclosure with locking and sealing arrangement along with suitable bus bar arrangement,for mounting of C.T's & 125/5-A CTs, cable termination arrangement complete as required
1
18000
18000
SAFETY EQUIPMENTS
-
-
-
Supply and installation of Rubber Mats 12mm thick of size 2000mm x 1000mm x 12 mm thick Electrical tested with test certificate.
4
14000
3500
Supply and fixing of shock treatement charts duly laminated along with separate colour single line diagram laminated, to be fixed in Electrical control panel room.
3
1950
650
Supply and fixing of first aid box with medicines complete with medicine with three years expiry date to be fixed in Electrical control panel room.
1
1500
1500
EXTERNAL ELECTRICAL WORK. (LANDSCAPING)
-
-
-
SUBMAIN.
-
-
-
Recessed wiring to submain in 2 x 2.5 sq.mm FR LSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired.
47
8366
178
Recessed wiring to submain in 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired.
58
9512
164
CABLE .
-
-
-
Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of 4 core 16 sq.mm Aluminium on surface as required.
142
44304
312
Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of 3Core 6 sq.mm direct in ground in the same trench in one tier horizontal formation including excavation , sand cushining protective covering and refilling the trench etc. as required.
84
17640
210
END TERMINATION
-
-
-
Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required.
-
-
-
4C x 16 sq.mm
24
5496
229
EARTHING
-
-
-
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required.
2
27414
13707
Supplying and laying 25 mm x 6 mm CU earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required.
10
5780
578
Supplying and laying 25 mm x 6 mm CU earth strip ISI marked on surface or in recess for connection etc as required.
10
6270
627
Providing and fixing 8 SWG CU wire on surface or in recess for loop earthing as required.
18
1296
72
EXTERNAL LIGHTING
-
-
-
Supply & fixing of 10W LED Bollards light Similar to HALONIX Cat no-HLOB-27-10-CW or Eq. Model of Jaquar/K Lite/Eq. LED with all accessories.
25
146250
5850
Supply & fixing of 15W LED Gate Light Similar to HALONIX Cat no-HLPT-S04-15-CW or Eq. Model of Jaquar/K Lite/Eq. with all accessories.
6
37878
6313
Supply & fixing of 60W LED Street light Similar to HALONIX Cat no-HLSLD-01-60-CWL-R or Eq. Model of Jaquar/K Lite/Eq.with 6M GI POLE and all accessories.
8
133824
16728
Supply & fixing of LED POST TOP light Similar to JAQUAR 340.PE8.NGG or Eq. Model of Halonix/K Lite/Eq. with all accessories.
6
209802
34967
Supplying and fixing of of 50mm G.I pipe (Medium Class) along with accessories in ground including cutting & making good the same as required.
30
4590
153
FIRE FIGHTING
-
-
-
FIRE EXTINGUISHERS - FIRST AID
Supplying, installing and commissioning of ISI ABC Powder 4 Kg Fire Extinguisher containing Mono Ammonium Phosphate Powder 50, Stored Pressure Type,Pressure Gauge, fittted with discharge hose, wall mounting bracket etc., Discharge Time less than 15 Secs, Controllable discharge mechanism, Range minimum 4 Meters, applicable on Class A,B,C and electrically started Fire, A Rating- 8A, B Rating 34B, Can Construction : Deep drawn & Co2 Mig welded, Valve Construction : Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster Powder coating, Sheet metal thickness : 1.60MM, ISI approved as per IS:15683:2006(Make: superimax/Cese fire/Minimax/ Eq)
18
58626
3257
Supplying, installing and commissioning of CO2 Type 4.5 Kg Fire Extinguisher containing Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, fittted with discharge hose, wall mounting bracket etc., Discharge Time less than 15 Secs, Controllable discharge mechanism, Range minimum 4 Meters, applicable on Class A,B,C and electrically started Fire, A Rating- 8A, B Rating 34B, Can Construction : Deep drawn & Co2 Mig welded, Valve Construction : Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster Powder coating, Sheet metal thickness : 1.60MM, ISI approved as per IS:15683:2006(Make: superimax/Cese fire/Minimax/Eq.)
4
29192
7298.2
Fire buckets (FILLED WITH SAND) round bottom type enamel painted, white inside & Red out side and Letter "FIRE" in black out side and handle with mounting bracket.
3
10500
3500
FIRE FIGHTING
-
-
-
Supplying, installation, testing and commissioning of Electric Motor Driven Pressurization Pump complete with Pump Set, Electric Motor, Base Frame and with 1 no. pressure switch, 1 no. pressure gauges, 2 nos. Butterfly valves, 1 no. NRV . PCC foundation and foundation bolts as per required for downcomer and system complete with Copper interconector from pump panel to pump drawn through PVC Rigid/Flexible Conduit(Maximum distance 5 meter) as required. I) Flow rate: 900 Ltrs/Min , 2840 RPM. Make of presure gauge- H GURU/G GURU/ Eq. Make of Valves-Kartar/Zoloto/Kirloskar/Eq. Make of Pump-Wilo/Kirloskar/Lubi/Eq.
-
-
-
ii) Head: 35 Meter
1
98742
98742
MCC PANEL
-
-
-
Supply, installation, testing and commissioning of Floor/Wall mounted sectionalised, front operated top entry dust and vermin proof M.V.Panel Boards suitable for operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2.0 mm thick CRCA sheet, insulated busbar with heat shrienkable PVC sleeve, base frame, complete with all accessories including interconnections, earth bus etc as required.
INCOMING: One (1)- 63 Amp, 10 KA,4P (Class-C) MCB with 3 Nos Phase indicating lamps with control fuse/ MCB, Digital Voltmeter with selector switch.
OUTGOING: Two (2) - 32Amp,10KA, TP(Class-C) MCB with Star-Delta starter with O/L and Single Phasing Preventor suitable for 7.5 HP motor. ON/OFF indication lamps, Auto manual switch and ON/OFF push button.
One (1) - Set of Auxilliary relay for automatic operation through pressure switch. Make of Switch gear- L&T/Schneider/Legrand/Eq.
-
-
-
PANEL AS ABOVE
1
36540
36540
Providing, laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to lS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc.,fixing the pipe on the wall/ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete as required.Make-Sail/TATA/Jindal/Eq.
-
-
-
100 mm dia
42
83160
1980
65mm dia
5
4850
970
Supplying and fixing single headed internal hydrant valve with instantaneous Gun metal couplings of 63 mm dia with cast iron wheel lSl marked conforming to lS 5290 (Type -A) with blank Gunmetal cap and chain as required.(Make-Newage/Fireshield/Minimax/Eq.)
3
16740
5580
Supplying and fixing 63 mm dia, 15 mtr. Long RRL hose pipe with 63 mm dia Male and Female Gun metal couplings duly binded with Gl wire,rivets etc. conforming to lS 636 (type-A) as required.(Make-Newage/Fireshield/Minimax/Eq.)
6
35414
5902.4
Supplying and fixing FirsfAid Hose Reel with MS construction spray painted in Post office Red,conforming to lS 884 with upto date amendments,complete with the following as required.
20 m. long 20 mm (nominal internal)dia water hose Thermoplastic (Textile reinforced) Type -2 as per lS: 12585
20 mm (nominal internal) dia gun metal globe valve & nozzle.
Drum and brackets for fixing the equipmets on wall.
Connections from riser with 40 mm dia stop valve (gun metal) & M.S. Pipe(Make-Newage/Fireshield/Minimax/Eq.)
3
13740
4580
Supplying and fixing of hose cabinet of size 1200 mm x 2000 mm x 600 mm made of 1.6 mm thick Sainless Steel Sheet with 6 mm thick glazed glass doors i/c necessary locking arrangement suitable to accommodate internal/external hydrant with butterfly valve, 2 Nos. 15 mtr. long Hose pipe, 1No. branch pipe, mounted on wall OR raised.(Make-Newage/Fireshield/Minimax/Eq.)
3
45289
15096.6
Supplying and fixing 2 Way FBC of CI body with 2 No. Gun Metal male instantaneous inlet couplings complete with cap and chain as required. For 100 mm dia M.S. Pipe connection conforming to lS : 904 as required With brick platform & duly painted with Post office red externally and white internally with synthetic enamel paint cornplete in all respect, for external hydrant, as required.(Make- Zoloto/Kartar/Eq.)
1
14700
14700
AUTOMATIC FIRE DETECTION SYSTEM
Supplying, installation, testing and commissioning of Addressable Multi Detector(Smoke cum Heat) complete with base and isolator as per direction of Engineer-in-charge.Make- Morlay IAS/Hochiki/Siemens/Edward/Eq.
18
51300
2850
Supply and installation of visual type response indicators with LED indicating lamp, housed in suitable MS enclosure with acrylic cover fixed in flush with wall to operate in conjunction with smoke/Heat detectors operating on 24 VDC installed above the false ceiling or below the false floor, complete with all accessories and fixing materials as required and as directed by Engineer-in-charge.Make-GST/Agni/Eq.
1
474
474
CONTROL PANEL
Providing S.I.T.C of Microprocessor based Addressable Fire Alarm Control Panel (2 Loop) suitable for serving the followingg detectors & Devices in maximum with LCD display, complete with) 2 Nos 12 Volt 40 Ah SMF battery, Battery backup and also provision for 2 Nos potential free Normally open contact per loop to be used for interlocking of AHUs in the event of fire as per direction of Engineer-incharge..Make- Morlay IAS/Hochiki/Siemens/Edward/Eq.
1
171289
171289
MCP Supplying, installing ,testing and commissioning of break glass type Manual call point . The Manual call point with monitor module shall be single stage type with all accessories and suitable sinages complete., the Manual call point shall be as per technical specification. and shall be of EN and LPCP listed. .Make- Morlay IAS/Hochiki/Siemens/Edward/Eq.
3
11400
3800
Electronic Hooters
Supplying, installing ,testing and commissioning of Hooter Cum Strobe at 85 dBA @ 3m for Audible annunciation and 75cd flashing at 1 Hz for visual indication. With Control Module. The Hooter cum Strobe with Control Module shall be flush or surface mountable type with all accessories etc., complete and as per technical specification. The devices shall be of EN and LPCP listed .Make- Morlay IAS/Hochiki/Siemens/Edward/Eq.
3
15771
5257
Wiring
Supplying and drawing of 2X1.5 sq.mm PVC insulated PVC Sheathed FRLS cable in the existing surface/ recessed conduit with all accessories as per direction of Engineer-in-charge.Make- Polycab/KEI/Havells/Eq.
350
52500
150
Supply, delivery and laying of following sizes of Steel Conduit in surface/ in recess alongwith other accessories and 18 swg GI wire complete for Fire Alarm wiring including painting as required and as per direction of Engineer-in-charge.
-
-
-
20mm dia
150
17250
115
25mm dia
50
8750
175
Master control unit with audio visual alarm with wiring complit system oprational as per your specification
1
12450
12450
Supply and laying UPVC Pipe (80 Schedule)
-
-
-
110 mm dia
40
14000
350
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements