Works Department Tender
... More
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Technical
Technical
Financial
Class Of Bidder
... View More
The class eligibility requirement to bid or participate in this tender is 'B' Class for Individual registered Contractors belonging to Schedule Caste and Schedule Tribe, while Super class, special class, or A class contractors are also mentioned as eligible in relation to a specific certificate.
Technical Capacity
... View More
The bidder is required to have prior work experience in civil engineering construction work, specifically in projects similar in nature to the work being tendered. They must provide a list of executed projects similar in nature to the work, as well as information on their annual turnover and existing commitments. The bidder's available bid capacity will be calculated based on the maximum value of works executed in any one year during the last five years. The value of civil engineering works executed during the last 5 years is required, with the following information provided:
* Year 1: Rs. 1.61 lakhs
* Year 2: Rs. 1.46 lakhs
* Year 3: Rs. 1.33 lakhs
* Year 4: Rs. 1.21 lakhs
* Year 5: Rs. 1.10 lakhs However, the exact amount of the maximum updated value of civil engineering works executed during the last 5 years, considering the escalation factor, is not specified. Regarding the percentage of similar works completed, no specific percentage is mentioned. But, if the rate quoted by the bidder is less than 15% of the tendered amount, then such a bid shall be rejected. Additionally, a 10% price preference will be allowed to individual registered contractors belonging to Schedule Caste and Schedule Tribe having a Registration Certificate up to 'B' Class. No specific amount or percentage of similar works completed is mentioned, except for the rejection of bids that are less than 15% of the tendered amount.
Costs
EMD
₹ 6,86,160Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_CERWI_109763_1Bid Award Id
ViewTender No
BPT/Online-13/2024-25Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
For 7.50 mtr dia Well
9.5
28422
270016.51
... More
For 7.0 mtr dia Well
6.26
25920
162263.02
... More
B) In Soft rock
-
-
-
... More
i) For 7.5m dia wells
5.7
328090
1870114.86
... More
i) For 7.0m dia wells
5.6
285803
1600497.49
... More
B) In Hard rock
-
-
-
... More
i) For 7.5m dia wells
1.2
655668
786802.75
... More
i) For 7.0m dia wells
1.2
571160
685392.61
... More
Supplying & fitting fixing in position steel cutting edge as per approved design & drawing weighing not less than 80kg. per meter including steel cladding using M.S.Angles/ rods, plates bolts & nuts, rivets complete wherever necessary including bending to size & shape drilling holes riveting welding bolting etc. complete in all respects confirming to relevant IRC codes & ISI specification including cost conveyance & all taxes of all materials, labour & T&P & all machineries etc. required for the work with all leads & lifts complete in position in all respects (cutting edge to be placed at the level of the bottom of well cap indicated in Drg. or 150 mm. above L.W.L. as specified in the Drg. or as per written order of the Engineer-in-Charge.
39.81
114493
4558084.8
... More
Cement concrete with M-150+10% extra cement on nominal mix to be used for bottom plugging having maximum compressive strength of 150 kg./cm2 with minimum quantity of cement as specified in IRC code in work tests on 150 mm. cubes at 28 days curing using cement as per CL 710-7 of IRC-78/1983 after mixing & tests conduct in accordance with IS 456 & IS-516 with crusher broken hard granite coarse aggregate of 40 mm. size down graded in conformity with clause-302.6.2 of IRC-21/1987 of approved quality (test in laboratory) from approved quarry & concrete laid in continuous operation using tremie pipes or skip boxes upto required depth including lowering, hoisting & laying in layers of 150 mm. thick with cost, conveyance royalty & other taxes of all materials, labour hire charges of all T&P & machineries required for the work complete in all respect. (in case of grouted concrete the grout mix shall not be leaner than 1:2) (Recuperation test may have to be done if directed by Engineer-in-Charge).
-
-
-
... More
Botton Pluging
282.22
6553
1849529.77
... More
Cement concrete of M-150 having maximum compressive strength of 150 kg./cm2 ( test to be conducted) on 150 mm. cubes tested at 28 days including curing (tests conducted in accordance with IS-456 & IS-516) & conforming to clause-302 of IRC 21/1987 using clean crusher broken hard granite coarse aggregate of 40 mm. size down grade of approved quality to be protested in the laboratory) obtained from approved quarry the proportion mix, grading conforming to relevant ISI/IRC codes pre-approved including arranging of reinforcement as per approved drawing including hoisting, lowering concrete in layers not exceeding 150 mm. thick each compacting with vibrator watering & curing for 28 days centering shuttering & finishing the exposed surface smooth providing grooves & beads where necessary including cost, conveyance royality & taxes of all labour machineries etc. required for the work complete in all respects including dismantling the centering & shuttering as per specification & direction of Engineer-in-Charge.
-
-
-
... More
Top Pluging
43.4
5733
248813.07
... More
Foundation
52.66
5733
301877.9
... More
Upto Bed
354.67
5875
2083729.44
... More
Cement concrete (1:3:6) in foundation & plinth with 4cm. crusher broken granite metal of approved quality from approved quarry including hoisting lowering & laying in layers not exceeding 150mm. thick with proper packing & ramming each layer of concrete by means of vibrator ,providing groove & beads where necessary including curing, dewatering, shoring, shuttering if necessary at the time of laying concrete with cost, conveyance royality & taxes of all material required for the work including supplying & working pumps, T&P articles finishing the exposed surface smooth as per specific ation & direction of the Engineer-in Charge
-
-
-
... More
Above Bed
8.66
6138
53177.65
... More
RCC of design mix of M-250grade having specified characteristics compressive strength/ target mean strength of 250kg./cm2 in design mix with minimum quantity of cement as specified in IRC Code of 150 mm. cubes at 28 days curing after mixing & tests conducted in accordance with relevant clauses of IS 456/IS 516/IRC 216/1987/IRC-78/1983 using crusher broken hard granite course aggregate of 20mm. down graded.sizes & proportion as specified in clause-302.6.2 of IRC 21/1987 & IS-10262 & subject to mix design in conformity with the grading & proportion of different materials for concrete as specified in the relevant codes of approved quality, obtained from approved quarry & using minimum quantity of cement confirming to codal provision including hoisting, lowering & laying concrete in layers not exceeding 15cm thick compacting with vibrators watering & curing for 28 days including water tight steel centering , shuttering & form works finishing the exposed surface smooth providing beads & grooves wherever necessary including cost, conveyance royalties and all other taxes of all materials with all leads & lifts, cost of all labour T&P & machineries etc. required for the work including dewatering if necessary, complete in all respects as per direction of the Engineer-in-Charge but excluding cost, conveyance of tor steel & binding wire & labour charges for straightening, cutting, bending, binding welding & tying the grills lapping spacing etc. where ever necessary & hoisting & placing in position ( to be paid separately as required for RCC works)
-
-
-
... More
Well Curb
115.42
12396
1430757.61
... More
Well Steining
253.65
9438
2394199.81
... More
Post & Railing
199
2338
465359.51
... More
Providing PCC of grade M-20 concrete in well curb/Well steining as per approved drawing and technical specifications as per Section 900, 1000, 1200, 1500, 1700,2200 & 2700 of Ministry of Road Transport & Highways (5th Revision) & and as per direction of the Engineer-in-charge.
-
-
-
... More
Well Steining
212.96
10204
2173017.49
... More
RCC of design mix of M-300grade having specified characteristics compressive strength/ target mean strength of 300kg./cm2 in design mix with minimum quantity of cement as specified in IRC Code of 150 mm. cubes at 28 days curing after mixing & tests conducted in accordance with relevant clauses of IS 456/IS 516/IRC 216/1987/IRC-78/1983 using crusher broken hard granite course aggregate of 20mm. down graded sizes & proportion as specified in clause-302.6.2 of IRC 21/1987 & IS-10262 & subject to mix design in conformity with the grading & proportion of different materials for concrete as specified in the relevant codes of approved quality, obtained from approved quarry & using minimum quantity of cement confirming to codal provision including hoisting, lowering & laying concrete in layers not exceeding 15cm thick compacting with vibrators watering & curing for 28 days including water tight steel centering , shuttering & form works finishing the exposed surface smooth providing beads & grooves wherever necessary including cost, conveyance royalties and all other taxes of all materials with all leads & lifts, cost of all labour T&P & machineries etc. required for the work including dewatering if necessary, complete in all respects as per direction of the Engineer-in-Charge but excluding cost, conveyance of tor steel & binding wire & labour charges for straightening, cutting, bending, binding welding & tying the grills lapping spacing etc. where ever necessary & hoisting & placing in position ( to be paid separately as required for RCC works)
-
-
-
... More
WELL CAP
288.65
7591
2191368.05
... More
Abutment & Pier Shaft Above Bed
181.49
9247
1678396.94
... More
Column / Wing Wall / Tie Beam
4.88
15754
76819.45
... More
Abutment & pier cap
27.46
8952
245861.85
... More
Dirt wall
13.68
12205
167000.51
... More
Superstructure
411.91
27757
11433766.12
... More
Road Kerb
25.99
8656
225017.97
... More
Approch Slab
17.33
7473
129477.17
... More
Providing and laying 25 mm thick mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-29, prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing antiskid surface with bitumen precoated finegrained hard stone chipping of 13.2 mm nominal size at the rate of 0.005cum per 10 sqm and at an approximate spacing of 10 cm center to center in both directions, pressed into surface when the temperature of surfaces is not less than 1000C, protruding 1 mm to 4 mm over mastic surface, all complete as per clause 515.
1492.5
1113
1661973.38
... More
Providing HYSD bars confirming to approved grade F-415 including all labours for cutting ,bending, binding, lapping, splicing, welding etc. (conforming to ISI specification) & jointing if necessary by lapping & tying the grills & placing in position as required for RCC works as per the approved design, hoisting, lowering & laying position including cost & conveyance of tor steel & binding wires of 18 to 20 gauge(as to be approved by the Deptt.) etc. complete with Cess in all respect (weight of binding wire shall not be considered for payment at all which will be borne by the contractor) as per specification and direction of the Engineer in charge.
1921.96
8856
17022749.15
... More
Providing weep holes in the abutment & wing walls 8.00cm. X 23.00cm. size including metal spall backing 30cm X 30cm. size in rear complete as per the approved design & drawing including providing centering & shuttering with cost, conveyance, royality & taxes of all materials T&P articles etc. complete in all respects as per specification & direction of the Engineer-in-Charge.
229.2
144
33211.08
... More
Back filling behind abutment, wing wall & return wall with granular material including all cost, carriage, royality & labour as per specification & direction of the Engineer-in-Charge.
-
-
-
... More
Granular Material
739.68
908
672134.68
... More
Sandy Material
237.55
1976
469425.55
... More
Providing 600mm thick filter media in the rear of abutment and wing walls with 5cm size and down graded hand broken granite metal of approved quality from approved quarry as per specification and direction of the Engineer-in-charge including cost, conveyance royalty and taxes of all materials T&P articles required for the work etc. complete.
101.05
2230
225431.74
... More
Supplying and fixing of RCC Guard post of 150 mm dia and IM long in RCC (1:2:4) using 20mm down graded size h.g chips including all labours, materials ,carriage ,royality & taxes of etc. complete.
240
985
236400
... More
Providing fitting & fixing expansion joints with M.S. Angles 75mm. X 75 mm. X 6 mm. at the edges of the slab with suitable anchoring arrangements by 12mm. M.S. Bars as per MOST design & drawing including fitting, fixing & welding with 6 mm. plates & filling joints of wearing coat with bitumen joint filler 12 mm. thick & joint sealing compound at top including painting of exposed surface of M.S. covered plates with anticorrosive bitumanstic paint etc. with cost, conveyance taxes of all materials labour & T&P etc. complete in all respects as per specification & direction of the Engineer-in-Charge.
30
12289
368679.9
... More
Supply and fixing of the POT / PTFE Bearing procured from approved manufacturer & with test certificates as per specification provided in drawing at location with all accessories complete & fixing on abutment and piers in position with all materials, labour, tools, equipment for fixing as per drawings and technical specifications part I/II, section 2000 & its relevant clauses & sub clauses of MoRTH specification for Road & Bridge works (4th revision) as directed by Engineer/or his representative to satisfaction.
18
69195
1245517.02
... More
Providing & Fixing drainage spout with 100mm dia GI pipe in deck slab with MS grating as per Clause-2705 under Section 900, 2700 of MORT&H specifications for Road & Bridge works (5th Revision) and as per direction of Engineer-in-Charge.
44
1434
63120.64
... More
Providing Rough stone dry packing / pitching in slope, protection walls, approns and revetments to designed thickness using hard granite stones of required size of approved quality from approved quarry including quarrying supplying conveying and cost conveyance taxes royalty of all materials including T&P complete including filling the interstices with small stones by wedging and hammering finished to proper slope and level as per direction of the Engineer – in – charge including dewatering if required.
383.52
2045
784323.34
... More
Finishing wall surface with waterproof cement paint of aproved shade 2 coats including watering, curing,cost of all materials & labour etc.
1514.1
46
69754.61
... More
Providing and applying two coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescense and applying paint @ 1 litre per 02 Sqm etc complete as per derection of Engineer-in-charge.
517.4
225
116484.56
... More
Fixing anchor bars upto 28mm. dia to the founding level at rock strata as per approved design including cost, conveyance & all taxes of all materials and T&P required for the work but excluding cost of TS rod & labour charges for bending, binding, tying the grills & placing in position as per specification & direction of Engineer-in-Charge.
226
214
48542.54
... More
Clearing grass and removal of rubbish up to a distance of 50 mtr outside the periphery of the area and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness as per specification and as per the direction of Engineer -in –charge.
5000
8
41300
... More
Construction of embankment with approved material obtained from borrow pits with all liifts and leads, transporting to the site by mechanical means within a lead of 05kms, spreading, grading to required slope and compacting to meet requirement of table 300-2 & clause 305 of MoSRT&H specifications for Road & Bridge works (04th Revision)
4125
200
828630
... More
Loosening of the ground upto a level of 500 mm below the sub grade level, watered, graded and compacted in layers to meet requirements of table 300 - 2 for sub grade construction & clause 305 of MoSRT&H specifications for road & bridge works(4th revision).
2100
52
110334
... More
Providing filling manually with selected sand in layers not exceeding 150mm thick including watering and compacting with all leads and lifts including cost , carriage royalty etc.
475.36
1349
641492.63
... More
Construction of granular sub-base by providing close graded granular sub base Grading III material as per table 401-1, spreading in uniform layer with moter grader on prepared surface, mixing by mix in place method with rotavator at OMC ,and compacting with vibratory roller to achieve the desired density complete as per clause 401 of MoSRT&H Specification for Road & Bridge works (4 th Revision)
872.1
1666
1453345.93
... More
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including pre mixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H Specifications for Road & Bridge works (4th Revision).
912.26
2231
2035430.97
... More
Providing and applying primer coat with bitumen emulsion (SS) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means as per Technical Specification Clause 502 of MOSRT&H including cost, conveyance, royalty, taxes of chips and bitumen & other required materials etc. complete and as per direction of Engineer-In-Charge.
4054.5
38
156463.16
... More
Providing and laying tack coat with penetration grade of bitumen emulsion (RS) of 0.20 Kg per Sqm after scraping cleaning the road surface including cost, conveyance royalty of all materials, T&P labour, hire charges of machinaries etc. complete as per Technical Specification Clause 503 of MOSRT&H and as per direction of the Engineer in charge.
5547
14
78046.29
... More
Providing and laying Bituminous Macadam with 100 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction
202.73
7848
1591125.68
... More
Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH spefn. clause No. 508 complete.
101.36
10134
1027250.15
... More
Furnishing and laying of the live sods of perennial turf forming grass on embankment slope, verges or other locations shown on the drawing or as directed by the engineer including preparation of ground, fetching of sods and watering as per technical specification
2400
31
75048
... More
Providing laying R.C.C. Hume pipe NP3 class for culverts including fixing collar with cement mortar 1:2 but excluding excavation, protection work, backfilling,concrete and masonry work in head walls and parapets clause 1106 of MORD specification for Rural roads and as per irection of Engineer-in charge.
-
-
-
... More
1000 mm dia SR HPC
30
6532
195971.4
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements