Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
₹ 51,800Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_EICCL_106626_12Tender No
05/KBJ/2024-25/2Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
(iv) Boundary wall
81.13
270
21978.12
(v) Drying Platform
13.49
270
3654.44
Filling in foundation trenches and plinth, with excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-in-charge
(i) Farmer Rest Shed
44.24
150
6658.12
(ii) Cover Pindi
42.88
150
6453.44
(iii) Internal Road
41.9
150
6305.95
(iv) Boundary wall
54.35
150
8179.68
(v) Drying Platform
9.04
150
1360.52
Supplying and filling in foundation and plinth with good quality river sand including watering, ramming with cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge
(i) Farmer Rest Shed
28.78
479
13785.62
(ii) Cover Pindi
12.9
479
6179.1
(iii) Internal Road
31.3
479
14992.7
(iv) Boundary wall
8.97
479
4296.63
(v) Drying Platform
37.8
479
18106.2
Providing & applying of pre constructional anti-termite treatment by drilling 12mm dia holes at distance of 30cm @ junction of wall & floor about 300mm apart deep enough to reach the soil below & chemical emulsion (IMIDACHLOPRIED 30.5SC mixed with 47.5ltr water) pumped these holes to soak the soil @ 1 ltr solution of each hole as per manufactures specification & the holes should be pluged the filling materials including cost of all materials, labour,conveyance, T&P , all taxes and hire charges of machinaries as per direction of Engineer-in-charge. Make premises - BAYER, Paxton -FMC, Ozie - KALYANI)
(i) Farmer Rest Shed
59.93
145
8689.85
Cement concrete of proportion (1:4:8) in foundation and floors using 4cm size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6") thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties of all materials with all labour and T&P required for the work etc. complete in all respect and as per the direction of the Engineer-in-charge
(i) Cover Pindi
16.02
5125
82107.31
Cement concrete of proportion (1:3:6) in foundation and floors using 4cm size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6") thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties of all materials with all labour and T&P required for the work etc. complete in all respect and as per the direction of the Engineer-in-charge
(ii) Farmer Rest Shed
14.82
5529
81939.78
(iii) Boundary wall
6.85
5529
37873.65
(iv) Drying Platform
10.17
5529
56229.93
Plain cement concrete (1:2:4) using 12mm size black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering, curing etc. complete including cost, conveyance, royalties of all materials with labour,labour cess and T&P etc. required for the work complete as per the direction of the Engineer-in-charge. (i) Cover Pindi
6.41
7193
46110.34
(ii) Drying Platform
9.35
7193
67259.23
First class Fly ash Brick masonry using bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge
(i) Farmer Rest Shed
9.02
5530
49886.91
(ii) Cover Pindi
17.89
5530
98944.22
(iii) Boundary wall
6.6
5530
36502.62
(iii) Drying Platform
18.59
5530
102815.71
Fly Ash. brick masonry of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with approved grade cement and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge
(i) Farmer Rest Shed
17.25
5569
96066.98
(ii) Boundary wall
35.84
5569
199596.54
Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.
(A) Footing
(i) Farmer Rest Shed
10.8
6504
70249.68
(ii) Cover Pindi
9
6504
58541.4
(iii) Boundary wall
10.58
6504
68818.67
(B) Column up to plinth
(i) Farmer Rest Shed
1.28
15647
20028.29
(ii) Cover Pindi
2.4
15647
37553.04
(C) Column up to GL
(i) Boundary wall
1.82
15647
28477.72
(D) Plinth Beam
(i) Farmer Rest Shed
3.15
7370
23218.02
(ii) Cover Pindi
3.89
7370
28672.41
(E) Column above Plinth
(i) Farmer Rest Shed
2.16
15647
33797.74
(ii) Cover Pindi
3.3
15647
51635.43
(F) Column above GL
(i) Boundary wall
4.05
15647
63370.76
(G) Lintel
(i) Farmer Rest Shed
0.37
14117
5223.51
(H) Chajja
(i) Farmer Rest Shed
1.62
1229
1991.14
(I) Roof Beam
(i) Farmer Rest Shed
3.15
15647
49288.37
(J) Slab
(i) Farmer Rest Shed
8.09
13682
110693.85
(K) Tie Beam
(i) Cover Pindi
2.64
15647
41308.34
(ii) Boundary wall
5.66
7370
41718.73
(L) Coping at top of Compound wall
2.26
15647
35362.45
Cutting, straightening coiled or bent up HYSD bar or tor steel of SAIL/ TATA / RINL (VIZAG) make including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Linear measurement will be taken and quantity will be calculated basing on the standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including weight of binding wire will not be considered for measurement) etc. complete as per specification & direction of Engineer-in-charge
(i) Farmer Rest Shed
33.88
8771
297188.58
(ii) Cover Pindi
32.16
8771
282101.09
(iii) Boundary wall
29.24
8771
256487.43
(iv) Drying Platform
5.61
8771
49209.8
Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. (i) Farmer Rest Shed
85.61
184
15786.48
(ii) Cover Pindi
34.2
184
6306.48
(iii) Boundary wall
156.18
184
28799.59
(iv) Drying Platform
17.55
184
3236.22
Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. (i) Farmer Rest Shed
96.19
266
25644.25
(ii) Boundary wall
159.77
266
42594.68
Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
(i) Farmer Rest Shed
53.97
208
11252.75
(ii) Boundary wall
61.65
208
12854.03
Supplying, fitting & fixing of Kota Tiles of minimum 16 mm thick Above 0.10 Sqm on 20mm thick bed of cement mortar (1:4) (1 cement : 4 course sand) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge.
(i) Farmer Rest Shed
27.26
1278
34854.64
Supplying, fitting & fixing of Kota Tiles of minimum 16mm thick and above 0.10 sqm of approved make in dadoes laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete incl. rubbing as per direction of the Engineer-in-charge
(i) Farmer Rest Shed
2.49
1535
3822.4
Providing Vitrified tile flooring using vitrified tiles having thickness of min 10mm conforming to IS 13755 of 600x600 (homogeneous) of premium quality (JOHNSON / SOMANY/ KAJARIA/ RAK) in floors, treads on steps and landings on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shades of the vitrified tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour,Labour cess , sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge.
(i) Farmer Rest Shed
17.28
1185
20481.98
Supplying, fitting & fixing of 8-10 mm thick and size of 600x600 mm vertified wall tile of in dadoes, skirting and risers of steps of laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge. (i) Farmer Rest Shed
2.52
1319
3324.89
Supplying, installation of pressed steel door of specific dimension and accessories such as hinges ,door stopper,tower bolt,door handle,door closer,dead lock,consedaled flush bolt,shaft lock,martise lock and vision panel etc. complete as mentioned along with warranty coverrage and after sales service etc inclusive of all cost ,taxes ,Gst,cost of delivery charges,fixing ,fitting and any other invidential charges etc.complete. (size-1.2 x 2.1 mt)
(i) Farmer Rest Shed
2.52
6500
16380
Supplying, installation of pressed steel window of specific dimension and accessories such as hinges ,door stopper,tower bolt,door handle,door closer,dead lock,consedaled flush bolt,shaft lock,martise lock and vision panel etc. complete as mentioned along with warranty coverrage and after sales service etc inclusive of all cost ,taxes ,Gst,cost of delivery charges,fixing ,fitting and any other invidential charges etc.complete. (size-1.2 x 2.1 mt)
(i) Farmer Rest Shed
6.44
6500
41860
Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar/ flat including stair case hand railing with 40mm. dia G.I.pipe etc. including painting two coats over a coat of redoxide primer as per approved drawing and design with cost of all materials & labour, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge.
(i) Farmer Rest Shed
160.88
64
10360.67
(ii) Compound wall
354.38
64
22822.07
Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in-charge.
(Make: Asian/ Berger/ Dulex/ ICI or equivalent make duly approved by Engineer-in-Charge)
(i) Farmer Rest Shed
235.77
81
19168.1
(ii) Cover Pindi
34.2
81
2780.46
(iii) Compound wall
377.6
81
30698.88
(iv) Drying Platform
17.55
81
1426.82
Wall painting two coats with Antifungal weather coat paint (1st quality) exterior grade of approved make & approved shade over a coat of primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge.
(Make: Asian/ Berger/ Dulux/ ICI or equivalent make duly approved by Engineer-in-Charge)
(i) Farmer Rest Shed
85.61
99
8526.76
(ii) Cover Pindi
34.2
99
3406.32
(iii) Compound wall
377.6
99
37608.96
(iv) Drying Platform
17.55
99
1747.98
Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make (JK White/ Birla white or equivalent make duly approved by Engineer-in-Charge) and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. (i) Farmer Rest Shed
96.19
89
8647.48
Painting two coats with plastic emulsion paint with a approved quality primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge.
Engineer-in-charge.
(Make: Asian/ Berger/ Dulux/ ICI or equivalent make duly approved by Engineer-in-charge) (i) Farmer Rest Shed
150.16
107
16157.22
Painting two coat with approved synthetic enamel paint to new iron work over a coat of Red oxide primer including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.
(Make-Asian/ Berger/ Dulux/ ICI or equivalent make duly approved by Engineer-in-charge).
(i) Farmer Rest Shed
3.22
185
598.28
(ii) Cover Pindi
68
185
12634.4
(iii) Internal Road
16
185
2972.8
(iv) Compound wall
16.54
185
3073.13
Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.
(i) Farmer Rest Shed
64.68
414
26822.8
Waterproofing application:- Providing and application of two component polymer modified flexible cementitious waterproofing coating at a thickness of 1.5 -2.5 mm The membrane should have Elongation equal or more than: 30% Crack Bridging ability : Up to 1 mm
Adhesive strength: 1.0 N/mm² @ 28d
Tensile elongation: 60% @ 20°C
Shore A Hardness 85 (between 3 - 7 days)
etc. as per direction of E.I.C (For longer span, in terrace panel of 4m*4m should be done by groove cutting, and filling with PU Sealant)
(Make-Myk, Fosroc, Sika)
(i) Farmer Rest Shed
64.68
490
31693.2
2.5 cm thick A.S Flooring in C.C (1:2:4) including punning using 12 mm size C.B hard granite chips with cost of all labour & other materials etc complete.
(ii) Cover Pindi
78
393
30685.2
(ii) Drying Platform
93.5
393
36782.9
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
(ii) Cover Pindi
1128
102
115845.6
Providing,fitting and fixing Dura sine colour coated 0.45mm Tata brand in roof. Drilling holes in windties including fixing of Ridges,Valleys and windties including cost of sheets,labour etc.complete. (ii) Cover Pindi
149.65
765
114563.06
Construction of granular sub-base by providing of grading-III (close graded GR-III) material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the required CBR.
(i) Internal Road
31.3
1390
43525.78
Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018 as per direction of the Engineer-in-charge.
(i) Internal Road
156.6
608
95275.44
Supplying and fixing of pre cast kerb stone of size 600 mm x 300 mm x 150mm of M30 grade of approved make.design colour and size made by block making machine with proper compaction fixed in requied pattern etc.complete in all respect conforming to IS 5758:1984.
(i) Internal Road
134
249
33439.7
Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area.
(i) Site Development
491.7
2
1327.59
Supplying of filling good earth in ground and over areas including watering, ramming, consolidating and dressing, labours, tools, taxes etc., all complete as per the specification and direction of Engineer-In-charge.
(i) Site Development
295
320
94577
EI PORTION OF WORK:-
Recessed Modular wiring to Light/ Fan/ Call bell and Exhaust fan point with 1.5 mm2 F.R. PVC insulated single core multi strand copper conductor of ISI marked with 50mm dia Non metallic with 20mm dia non metalic PVC flexible conduit with 5/6 250volt Modular type switch,ceilling rose mounted on MS box having front bakelite cover of suitable size M.S box with 1.5mm2 FR pvc insuleted S/C multistand copper conductor as earth wire Including all accessories and connection.as per direction of Engineer-in-charge. (Make of wire Finolex / Anchore / Havels / HPL / L&T / V.Guard & make of switch & socket Legrand / Hager / L&T.
(a) Group-A
30
560
16800
(b) Group-B
16
802
12832
(c) Group-C
11
1107
12177
Recessed wiring to 5/6A socket outlet with 2x1mm2 PVC Insulatted S.C F.R multistand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit pipe with Modular type switch.
(a) Group-A
7
601
4207
(b) on existing board
7
143
1001
Recessed Modular wiring to power plug point with 2x4mm2 PVC Insulatted S.C F.R multistand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit along with 1x2.5mm2 F.R PVC insulated S.C C.U. wire for loop earthing as required.(Make of wire finolex / Anchore / Havels / HPL / V.Guard)
3
590
1770
Wiring to Circuit/ Sub-main along with earth wire with following size of FR PVC S.C.Cu. Wire (Make of wire Finolex/ Anchor / Havels / HPL / L&T / V.Guard.
1x1.5mm2 Sub-Main Wiring for Invertor connectiom.
112
34
3808
a) (1.8.1) 2X1.5mm2 + 1x1.5mm2
92
134
12328
b) (1.8.2) 2X2.5mm2 + 1x1.5mm2
220
148
32560
c) (1.8.3) 2X4mm2 + 1x1.5mm2
52
165
8580
Recessed wiring to submain in 4 x 6sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 4.0 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire- Finolex / Anchor / Polycab / HAVELLS / RR KABEL or equivalent) (Make of conduit - AKG / Anchor / Kinjal or equievalant) approved equivalent make as per the direction of Engineer in Charge. (For LDB, ELDB & UPS DB)
30
314
9420
S/F of (4+12) way double door TPN distribution Box for single phase out going incoming- 63Amp TPN MCB of havells make, outgoing- 12 x (6-32) A SP MCB as per direction of engineer in charge( DB & MCB of make Schnider / Hager / Legrand / L&T)
1
8914
8914
S/F of 5star rated(BLDC) ISI marked Ceiling fans as per direction of engineer in charge Make : Usha / Havells / CG / Bajaj / eq
8
3724
29792
S/F of step type electronic fan regulator of L&T / Legrand / equivalent make.
8
419
3352
S/F of 60watt LED Street light fittings complete with lamp of Havels / HPL / Bajaj make.
2
5611
11222
Supply and Fixing of GI bend pipe for street light including all accessories i.e clamp or jam lock etc
2
650
1300
S/F of 18watt LED Tube light fitting of Phillips / Bajaj / Havels / HPL make
25
284
7100
S/F of computer Board consisting of 3 No. modular plug and switch all accessories including recessed wiring,Cutting of wall & connection as per requirement.
1
1146
1146
S/F of 9wt LED Bulb of Havel / HPL / Bajaj make.
4
157
628
S/F of Modular Angle Holder.
4
67
268
S/F of 12watt Surface mounted LED down light complete of Havells / Bajaj / HPL make.
4
1335
5340
Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required as per the direction of Engineer in Charge.
1
2220
2220
S/F of 300mm Exhaust Fan of model Usha turbo jet /Bajaj freshee with louvers i.e safe guard .
2
1632
3264
S/F of Ultra modern surface mounted Decorative oval Bulk head edge LED Luminaire complete with 10watt LED lamp. (Make Hvells / Endura Rugby model)
4
1707
6828
S/F 3& 1/2 x 50 mm2 PVC Al Armoured Cable Of ISI Marked (Polycab / Nicco / Havels)
30
538
16140
S/F of extra long No.8 G.I.wire for running of earth .
28
54
1512
S/F of 1650 VA UPS (Microtake / Luminous) with 2No.150 AH Sine Wave inverter battery (make Exide / Amaron / Luminous or equivalent)
1
39190
39190
Fabrication of 63A panel board of size 1110x900x330 mm with powder coat made out of 18 SWG CR sheet with provn of Incoming 63 Amp 35 KA 4-pole MCCB of Havels make-1no, 63A onload change over of Havels make-1no, Out Going-200Amp copper Bus bar 40mm x 3mm copper flat-1No, 63amp MCCB four pole 16KA breaking capacity make of Seimens / L&T / Havels / HPL-2No.,40 Amp DP MCB of 'C' Series-04 No. complete with pre-wired digital Volt meter, Ammeter, selector switch, C.P.Coil and Indicator lamp RYB including Transporation and fixing charges.
1
49317
49317
External Area lighting:-
Supply, Installation, Testing & Commissioning of 9 Mtr long Galvanized PU painted octagonal pole with 100watt Street light, 6A.MCB, Connector with all other wiring material, Pole with top dia.-70mm, Bottom dia.-155mm,PCD-250mm, Thickness-3.1mm with foundation bolt and decorative bracket of 1 Mtr long suitable for holding 1 No of 100 Watt LED Street light. The pole design must be suitable for wind speed as per IS 875, IS 2062 grade E350/BS EN 10025 S355 Low Silicon (-0.06%) High Tensile Steel Sheet as per IS 2062/BS EN 10025 Or Equivalent.Hot Dipped Galvanized, as per BS EN ISO 1461 Average coating should be 55 microns.E250 Grade as per IS 2062 of Make (Bajaj Cat.No.BOP 9030 or equivalent of Klite / Valmount) 100W LED Street light with Epoxy powder coated pressure die-cast alluminium housing and LED driver cover with Silicon gaskets provided for LEDs and control gear compartments. LEDs must have with non-yellowing secondary lense optics. The driver used is specially designed to have built-in surge voltage, open / short circuit protections, External surge protection of 10 KV provided for additional safety. Side entry mounting for 55 to 60mm OD pipe bracket, Top maintenance: Access to driver is from the top. The fixture must have-12000 LM with peak power consumption of 100 Watt.The lighting fixture must deliver average 25 Lux of 6Mtr road. (Make:-Bajaj Model No.ENXT P 120L WH or equivalent to Philips / LT)
4
39361
157444
Supply and laying of 1.5 sqmm 4C round flexible copper cable in flexible pipe or any protective insulated cover. Make: polycab / Finolex / KEI / Havells
38
91
3458
S/F 2 x 6 mm2 PVC Al Armoured Cable Of ISI Marked (Polycab / Nicco / Havels)
80
108
8640
Cost of Labour charges for Cable Treanching in all type os Soil including excavation of earth,laying of cable upto 25mm2 & filling of loose soil upto ground level .
50
122
6100
S/F of 32Amp DP switch.complete with connection as per required.
4
214
856
Supply & Fixing of 63Amp cubicle panel board (outdoor stand mounted feeder panel) of size-36" x 24"x 10" assembled with 63Amp 4-pole CCB, 16kA-1 No as Incomer, 32Amp TPN MCB-1No, Digital Timer with 25Amp TP contactor-1 set for the automatic switching of Luminaries, Power tool control with 2No. of 4-pole 16Amp contactors, raise and lower push bottom as per direction of Engineer-in-charge. (MCCB, MCB, Timer & Contactors should be make of Siemens / Schneider / legrand / L&T / Havells / Equivalent as per direction of engineer in charge).
1
31310
31310
S/F of Special Earthing complete with provision of 600 x 600 x 3.15mm thick copper plate along with 25 x 5mm copper strip in 40mm dia GI pipe including soldering of strip if necessary and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required.
2
12531
25062
Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing as required as per the direction of Engineer in Charge.
20
89
1780
INTERNAL PH WORK:-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge (a) 20mm dia PVC ASTM pipe (sch-80)
19.5
302
5898.75
(b) 25mm dia PVC ASTM pipe (sch-80)
40
404
16160
(c) 32mm dia PVC ASTM pipe (sch-80)
38
606
23028
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
(i) 15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)
4
861
3445.2
(ii) 15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make)
2
1255
2510
(iii) 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make)
1
1451
1451.9
(iv) 20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make)
2
1132
2264
(v) 15mm dia CP Bib cock (Con-CHR-011KN Jaquar make)
5
1156
5783
(vi) 25mm dia brass full way valve (Shakti make)
2
1211
2423.8
(vii) 32mm dia brass full way valve (Shakti make)
2
1774
3548.4
(viii) 15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make)
1
1648
1648.7
(ix) 15mm CP Extension piece
11
52
578.6
(x) 125mm CP grating
5
87
435.5
(xi) 15mm size C.P. flange
11
77
851.4
Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 Mtr. lengthx0.25 Mtr. width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13Mtr. thick circular protection wall of 0.46Mtr. height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge.
(i) 2000 liters capacity PVC water storage tank
1
47337
47337.1
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.
10
62
622
Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge
4
212
850
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
20
218
4378
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. (i) 110mm U-PVC SWR Pipe (Supreme /Ashirvad)
28
514
14406
(ii) 110mm U-PVC ‘P’ Trap (Ori Plast / Finolex / Supreme Make)
4
497
1989.2
(iii) 110mm U-PVC door bend (Ori Plast / Finolex / Supreme Make)
4
293
1174.4
(iv) 110mm U-PVC Plain bend (Ori Plast / Finolex / Supreme Make)
4
232
928
(v) 110mm U-PVC offset without ear (Ori Plast / Finolex / Supreme Make)
4
407
1629.6
(vi) 110mm U-PVC Cowl (Ori Plast / Finolex / Supreme Make)
2
58
116.4
(vii) 110mm U-PVC S/Jn door (Ori Plast / Finolex / Supreme Make)
2
457
914.2
(viii) 110mm U-PVC Plain tee (Ori Plast / Finolex / Supreme Make)
4
322
1290.8
(ix) 110mm U-PVC D/Jn door (Ori Plast / Finolex / Supreme Make)
2
551
1102.4
(x) 110mm U-PVC Door tee (Ori Plast / Finolex / Supreme Make)
4
386
1544
(xi) 110mm U-PVC Socket (Ori Plast / Finolex / Supreme Make)
10
160
1601
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
(i) 580mm size Orissa pan (Hindware/Parryware/Neycer make)
2
2179
4358.2
Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
(i) 10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend (Slimline-white-Parryware make)
2
2365
4731.4
Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal
1
5894
5894.5
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge.
(i) Under Counter basin(560x450)Hindware-No.10095
2
5273
10546.4
Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink
1
5902
5902.4
Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.
(i) 25mmx600mm long CP towel rail
2
901
1802
(ii) Towel ring
2
648
1296.2
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.
(i) 600mm x 125mm plate glass shelf with CP/NP guard rails.
2
694
1389.2
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
(i) 600mm x 450mm size B.E mirror (swivelled type)
2
803
1606.8
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.
(i) CP soap holder
4
279
1118.4
Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.
(i) ½” x 5” CP Shower (Plaza Deluxe Make)
2
530
1060.6
Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
8
238
1911.2
Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
10
148
1485
Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mm x 760mm x 460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge.
(i) Inside size 76cm x 76cm x 46cm with 18” dia RCC MH cover
5
10736
53681
Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge
2
1760
3521
Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge8.44 x 0.10
2.3
5453
12541.9
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
1.17
7538
8819.69
Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size Kajaria/Somany/Johnson tile 30cmx30cm special printed series to be pre-approved by the Engineer-in-charge.
(i) Kajaria / Somany / Johnson tile 30cm x 30cm Ground Floor
10.8
925
9994.32
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
40
199
7984
Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size Kajaria/Somany/Johnson tile 45cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge.
(i) Kajaria / Somany / Johnson tile 45cm x3 0cm Ground Floor
40
914
36568
Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.Mtr. shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.15 x 0.76 x 2.10
4.2
3430
14408.52
Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge 15 x 4.96
10.4
1114
11588.72
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 80 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 80 liter's along with 2 noa of faucets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge.
(i) Aqua guard pure Chill 80 PSS UV
1
112242
112242
EXTERNAL PH WORK:-
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge.
(I) 150mm dia P.V.C. pipe
12
1310
15723.6
Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. (I) MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover )
1
9350
9350.2
Supplying all materials labour T&P and constructing 1.80m dia x 2.60 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
1
21050
21050.2
1 No 20 Users Septic tank:-
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.
11.73
291
3422.23
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft.
4.69
313
1468.81
Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.
2.92
162
473.27
Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
2.92
7538
22011.54
Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.
0.45
8315
3742.07
Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
0.4
9240
3696.16
Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge.
(I) RCC floor, roof slab chhaja up to 4.430 m height
4.29
753
3232.94
Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering, curing, cost of all materials, conveyance of all materials to worksite, payment of royalty, all taxes etc.all complete as per PWD specification and direction of the Engineer in charge.
6.07
6051
36732.61
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
22.08
212
4685.38
Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:6) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
22.08
186
4106.88
Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge
22.08
41
911.9
Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification.
2
285
570.8
Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge.
2
433
866.6
Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge.
1.17
556
651.22
Construction of 1nos production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories
Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only.
(a) Drilling of 200mm dia bore
(I) 00 Mtr. to 30Mtr.
30
755
22664.4
(II) 30 Mtr. to 45Mtr.
10
836
8362.8
(b) Drilling of 150mm dia bore
(I) 45 Mtr. to 215.00Mtr.
60
554
33269.4
Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
(a) Lowering of 200mm dia P.V.C casing pipes
(I) 00 Mtr. to 30 Mtr.s
30
138
4146
(II) 30 Mtr. to 60Mtr.
10
138
1382
Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 Mtr. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.
(I) 200mm dia PVC (sch-80) pipe
40
1633
65352
Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)
1
789
789.8
Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge.
(I) By DTH Rig
1
4994
4994.8
Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation:
(I) Rocky terrain with boulder formation for 300m depth
2
1122
2244.22
Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make)
(A) 1 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 Mtr. with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby)
1
16737
16737.2
(B) DOL Control panel
1
3805
3805.5
(C) 40mm dia steel short piece
1
152
152.3
(D) Well cap
1
152
152.3
(E) 50mm size CI bracket
1
91
91.3
(F) 2.50sqmm flat cable
60
128
7710
(G) 20mm dia rigid UPVC pipes
60
6
414
(H) Steel rope with cover
60
26
1602
(I) Labour charges for lowering including transportation
1
2000
2000
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge.
(I) 32mm HDPE pipes (Finolex/Supreme make)
45
99
4491
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements