Works Department Tender
Search from a pool of business opportunities related to Odisha tenders on the online platform of BidAssist. Be it an Odisha PWD tender or a civil aviation tender, one can find every tender Odisha government, as well as PSUs and other organizations, post online. Every tender, active or achieved, is sourced from the eProcurement Odisha website and thus carries full credibility.
Costs
EMD
Refer DocumentsDocument Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_EICCL_73166_1Bid Award Id
ViewTender No
SEBdk-29/2021-22Tender Authority
Works Department ViewPurchaser Address
-Website
http://https://www.worksodisha.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing 300mm dia 8.0 Mtr.long single under reamed pile foundatiion with RCC M-20m grade using 20mm & down graded BG(C.B) chips of appdquaity from appd.quarry (20mm not to exceed 25 %)including hoisting,lowering,laying and compacting concrete watering and curing with all cost of materials and labour T&P etc.complete as per direction of Engineer-in-charge,.300mm dia(6.00mtr)
108
-
5442.6
Filling foundation and plinth with excavated earth by mannual means spreading,grading to required slope of compacting to meet requirement as per specification for road and bridge works as per directiion of Engineer-in-charge.
87.78
-
124.26
RCC work of Prop (M-20) using 20mm and down graded BHG(C.B) chips of appd.quality from appd. Quarry including hoisting,lowering,laying and compacting concrete,watering and curing centering,shuttering and finishing the exposed surface smooth with cost,conveyance,royalties and taxes including all cost of materials and labour T&P etc.complete as per direction of Engineer-in-charge.PILE CAP:
51.92
-
4825.3
PLINTH BEAM
14.64
-
4825.3
COLUMN S/S
11.88
-
11999.5
LINTEL BAND
6.91
-
7333.5
CHAJJA
26.89
-
778.7
ROOFBEAM
17.93
-
11999.5
STAIRCASE
3.56
-
10046
ROOFSLAB
25.51
-
8989.2
Cutting,straightening,coiled or bent up M.S.Rod or Tor steel of primary steel producers such as SAIL / TISCON / RINL (Grade Fe-500 D) etc.including bending,binding ,welding and jointing if necessary and tying the grills and placing in position as reqd.for RCC work and for providing fan hooks as reqd. hoisting,lowering,laying including cost, conveyance,t axes of M.S.Rod or Tor steel and binding wires of 18 to 20 gauge and labour reqd.for the work for bending,binding and tying the grills in all floors.(Payment will be made on standard weight of B.I.S.for M.S.Rods or Tor steel Only)etc.complete as per direction of Engineer-in-charge.
236.87
-
8437
Fly Ash brick masonary in C.M(1:6)using bricks of size 25cmx12cmx8cm having crushing strength 75kg / cm2 after immersing the bricks for six hours in water before use in Foundation and Plinth with all necessary projections,cutting,moulding,corebelling,champering,watering and curing with all cost of materials and labour T&P etc.complete as per direction of Engineer-in-charge.
45.68
-
4287
Fly Ash brick masonary in C.M(1:6)using bricks of size 25cmx12cmx8cm having crushing strength 75kg/cm2 after immersing the bricks for six hours in water before use in Super structure with all necessary projections, cutting,moulding,corebelling, champering, watering and curing with all cost of materials and labour T&P etc.complete as per direction of Engineer-in-charge.
120.33
-
4325.4
Supplying fitting and fixing of M.S.Grills,Grill gate,M.S.Gates,M.S.door,M.S.Shutter with houkaaths ,Collapsible gates with top and bottom rails,steeel windows critical frames for windows ,staircase and parapet railing made out of M.S.Square bar / flat including .as per approved drawing and design with cost of all materials and labour, taxes, labour cess, T&P sundries etc.complete in all respect as per specification and direction of the Engineer-in-charge.
772.2
-
62
Dessed seasoned Sal wood work (Wrought and put up) for Door and window Choukaths etc. completed with iron fittings and wooded hinged cleats etc. fixed in position including all cost of materials and labour T&P etc.complete as per direction of Engineer-in-charge.
0.2
-
49186.25
Supplying fixing fitting of flush door 32mm thick with all cost of materials and labour T&P etc.complete as per direction of Engineer-in-charge.
11.55
-
4395.4
Providing ,fitting and fixing fully glazed alluminium framed openable windows using 15 micron anodised alluminium section 2082 as out section 9139,as mulion section 4124 as a shutter section frame with tappered clip of section 4124,alluminium angle, rubber bending,friction stay and handle as shutter frame with 12mm thick prelaminated particle board as panel fitted including all fitting with cost of all mterials ,labour T&P etc. complete as per direction of Engineer-in-charge.
19.44
-
3762.83
Supplying providing & fixing of louvered glass ventilator in aluminium section.with all cost of materials and labour T&P etc.complete as per direction of Engineer-in-charge.
2.88
-
4618.56
6mm thick Cement plaster in C.M(1:4) as ceiling plaster after rackingout joint including watering and curing with all cost of materials and labour T&P etc.complete as per direction of Engineer-in-charge.
694.32
-
152.43
12mm thick Cement plaster in C.M(1:4)over exterior surface of brick walls after rackingout joint including watering and curing with all cost of materials and labour T&P etc.complete as per direction of Engineer-in-charge.
136.2
-
148.3
12mm thick Cement plaster in C.M(1:6)over exterior surface of brick walls after rackingout joint including watering and curing with all cost of materials and labour T&P etc.complete as per direction of Engineer-in-charge.
285.42
-
137.4
16mm thick Cement plaster in C.M(1:6)over interior surface of brick walls after rackingout joint including watering and curing with all cost of materials and labour T&P etc.complete as per direction of Engineer-in-charge.
581.58
-
195.8
Providing,fitting and fixing Industrial Vetrified floor tiles in floors,treads and steps over 20mm thick bed of C.M(1:4) jointed with neat cement slurry mixed with pigment to match the shades of tiles including all cost of materials and labour T&P etc. reqd. for the work complete as per direction of Engineer-in-charge.
3.57
-
840.1
Providing,fitting and fixing Vetrified floor tiles in floors,treads and steps over 20mm thick bed of C.M(1:4) jointed with neat cement slurry mixed with pigment to match the shades of tiles including all cost of materials and labour T&P etc. reqd. for the work complete as per direction of Engineer-in-charge.
233.13
-
895
Providing,fitting and fixing Vetrified tiles in dados & skirting and riser of steps on 12mm thick bed of C.M (1:3) jointed with neat cement slurry mixed with pigment to match the shades of tiles including all cost of materials and labour T&P etc. reqd. for the work complete as per direction of Engineer-in-charge.
35.86
-
994
Providing for supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of 32mmx32mmx2mm @ 0.90 mtr.C/C and stainless square pipe bracings of size 32mmx32mmx2mm in three row in stair case as for and specification butting polishing etc. approvede design including all cost of materials and labour T&P etc.complete as per direction of Engineer-in-charge.
7.4
-
2811.65
Finishing the plastered surface of wall with cement based Wall Putty (Water based ) of approved make and finishing the surface smooth and even by sand papering to receive paint in wall including all cost of materials and labour T&P etc.complete as directed by Engineer-in-charge.
1697.52
-
64.4
Painting two coats to wall surface with approved plastic paint of appd.shade over one coat of primer including all cost of materials and labour T&P etc.complete as directed by Engineer-in-charge.
1071.45
-
140.5
Finishing wall surface with water proofing weather coat paint two coats over onecoat primer to give an even shade over the plastered surface of brick walls including all cost of materials and labour T&P etc.compete as directed by Engineer-in-charge.
626.07
-
133.98
Painting two coats with enamel paint of appd.shade Door/window over wood / Iron work over a coat of primer including all cost of materials and labour T&P etc.complete as directed by Engineer-in-charge.
52.2
-
191.34
Providing anti termite treatement as per ISI specification including making holes 3'0"C/C both way cemical with water in propertion1:20 with all cost of materials and labour T&P etc.complete as per direction of Engineer-in-charge.
154.37
-
121.5
First Floor RCC work of Prop (M-20) using 20mm and down graded BHG(C.B) chips of appd.quality from appd. Quarry including hoisting,lowering,laying and compacting concrete,watering and curing centering,shuttering and finishing the exposed surface smooth with cost,conveyance,royalties and taxes including all cost of materials and labour T&P etc.complete as per direction of Engineer-in-charge. column
1.02
-
13548.1
lintel
0.6
-
7948.9
chajja
0.59
-
879.1
Fly Ash brick masonary in C.M(1:6)using bricks of size 25cmx12cmx8cm having crushing strength 75kg/cm2 after immersing the bricks for six hours in water before use in Superstructure with all necessary projections, cutting,moulding, corebelling, champering,watering and curing with all cost of materials and labour T&P etc.complete as per direction of Engineer-in-charge.
24.37
-
4587.23
Cutting,straightening,coiled or bent up M.S.Rod or Tor steel of primary steel producers such as SAIL / TISCON / RINL (Grade Fe-500 D) etc.including bending,binding ,welding and jointing if necessary and tying the grills and placing in position as reqd.for RCC work and for providing fan hooks as reqd. hoisting,lowering,laying including cost, conveyance,t axes of M.S.Rod or Tor steel and binding wires of 18 to 20 gauge and labour reqd.for the work for bending,binding and tying the grills in all floors.(Payment will be made on standard weight of B.I.S.for M.S.Rods or Tor steel Only)etc.complete as per direction of Engineer-in-charge.
2.56
-
8460.4
6mm thick Cement plaster in C.M(1:4) as ceiling plaster after rackingout joint including watering and curing with all cost of materials and labour T&P etc.complete as per direction of Engineer-in-charge.
11.53
-
156.2
12mm thick Cement plaster in C.M(1:6)over exterior surface of brick walls after rackingout joint including watering and curing with all cost of materials and labour T&P etc.complete as per direction of Engineer-in-charge.
114.25
-
142.8
16mm thick Cement plaster in C.M(1:6)over interior surface of brick walls after rackingout joint including watering and curing with all cost of materials and labour T&P etc.complete as per direction of Engineer-in-charge.
91.59
-
200.7
Supplying fitting and fixing of M.S.Grills,Grill gate,M.S.Gates,M.S.door,M.S.Shutter with houkaaths ,Collapsible gates with top and bottom rails,steeel windows critical frames for windows ,staircase and parapet railing made out of M.S.Square bar / flat including .as per approved drawing and design with cost of all materials and labour, taxes, labour cess, T&P sundries etc.complete in all respect as per specification and direction of the Engineer-in-charge.
243.9
-
62
Painting two coats with enamel paint of appd.shade Door/window over wood / Iron work over a coat of primer including all cost of materials and labour T&P etc.complete as directed by Engineer-in-charge.
5.04
-
196.2
Finishing the plastered surface of wall with cement based Wall Putty (Water based ) of approved make and finishing the surface smooth and even by sand papering to receive paint in wall including all cost of materials and labour T&P etc.complete as directed by Engineer-in-charge.
217.37
-
65.68
Painting two coats to wall surface with approved plastic paint of appd.shade over one coat of primer including all cost of materials and labour T&P etc.complete as directed by Engineer-in-charge.
91.59
-
143.68
Finishing wall surface with water proofing weather coat paint two coats over onecoat primer to give an even shade over the plastered surface of brick walls including all cost of materials and labour T&P etc.compete as directed by Engineer-in-charge.
125.78
-
137.16
Providing fitting and fixing G.C.I.Sheet in roof including drilling holes in frames including all cost of materials and labour T&P etc. complete as per direction of Engineer-in-charge.
18
-
455.8
Plinth protection Earthwork in excavation of foundation in hard soil including dressing and levelling the bed upto the reqd. depth and deposited the excavated materials with all leads and lifts T&P shoring and shuttering if reqd. etc.complete as per direction of Engineer-in-charge.
59.61
-
186.39
Supplying,filling foundation and plinth with sand of approved quality from approved quarry well watered and rammed with rammer including all cost of materials and labour T&P etc. comple as directed by Engineer-in-charge.
26.61
-
549.79
Providing Plain cement concrete (1:3:6) by using 40mm size BHG(C.B) metal of appd.quality from appd.quarry including hoisting,lowering and laying concrete in layers to the reqd.levels ramming watering, curing etc. complete including cost,conveyance,royalties and taxes of all materials with all labour T&P reqd. for the work etc.complete in all respect and as per direction of Engineer-in-charge.
2.55
-
4493.57
Fly Ash brick masonary in C.M(1:6)using bricks of size 25cmx12cmx8cm having crushing strength 75kg / cm2 after immersing the bricks for six hours in water before use in Foundation and Plinth with all necessary projections,cutting,moulding,corebelling,champering,watering and curing with all cost of materials and labour T&P etc.complete as per direction of Engineer-in-charge.
7.98
-
4287
Providing Plain cement concrete (1:2:4) by using 12mm size BHG(C.B) Chips of appd.quality from appd.quarry including hoisting,lowering and laying concrete in layers to the reqd.levels ramming watering, curing etc. complete including cost,conveyance,royalties and taxes of all materials with all labour T&P reqd. for the work etc.complete in all respect and as per direction of Engineer-in-charge.
6.39
-
5797.3
Supplying fitting & fixing of 80mm thick paver block of approved qu€lity including cost of all materials, takes labour T&P with all cost of materials and labour T&P etc.complete as per direction of Engineer-in-charge.
85.15
-
827.59
Filling foundation and plinth with excavated earth by mannual means spreading,grading to required slope of compacting to meet requirement as per specification for road and bridge works as per directiion of Engineer-in-charge.
59.61
-
124.26
APPROACH ROAD Earthwork in excavation of foundation in hard soil including dressing and levelling the bed upto the reqd. depth and deposited the excavated materials with all leads and lifts T&P shoring and shuttering if reqd. etc.complete as per direction of Engineer-in-charge.
8.64
-
186.39
Supplying,filling foundation and plinth with sand of approved quality from approved quarry well watered and rammed with rammer including all cost of materials and labour T&P etc. comple as directed by Engineer-in-charge.
4.68
-
549.79
Providing Plain cement concrete (1:3:6) by using 40mm size BHG(C.B) metal of appd.quality from appd.quarry including hoisting,lowering and laying concrete in layers to the reqd.levels ramming watering, curing etc. complete including cost,conveyance,royalties and taxes of all materials with all labour T&P reqd. for the work etc.complete in all respect and as per direction of Engineer-in-charge.
0.18
-
4493.57
Providing Plain cement concrete (1:2:4) by using 12mm size BHG(C.B) Chips of appd.quality from appd.quarry including hoisting,lowering and laying concrete in layers to the reqd.levels ramming watering, curing etc. complete including cost,conveyance,royalties and taxes of all materials with all labour T&P reqd. for the work etc.complete in all respect and as per direction of Engineer-in-charge.
0.12
-
5797.3
Supplying fitting & fixing of 80mm thick paver block of approved qu€lity including cost of all materials, takes labour T&P with all cost of materials and labour T&P etc.complete as per direction of Engineer-in-charge.
15
-
827.59
E I WORKS Sub-Head I (Modular Wiring Items) Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed make A catagory ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Havells or equievalant reputed make A catagory ISI marked as approved 6A modular type ( falme retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) ( falme retradant type) Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved of suitable size, modular box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for OFFICE. All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. GROUP-A
67
-
544
GROUP-B
21
-
771
GROUP-C
10
-
1054
Group control of point in Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Make- Finolex/Anchor/Polycab/HAVELLS or equievalant reputed make A catagory ISI marked as approved as approved 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Kinjal or equievalant reputed make A catagory ISI marked as approved with 6A modular type(( falme retradant type)) switch ISI marked Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Equievalant model) or equievalant reputed make & model A catagory ISI marked as approved of modular type G.I box with metallic cover plate (both side) falme retradant type) Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved, of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for OFFICE.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
10
-
993
Group control of point in existing false ceiling wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Make- Finolex/Anchor/Polycab/HAVELLS or equievalant reputed make A catagory ISI marked as approved as approved with 20 mm dia steel conduit ISI mark metallic conduit ISI marked Make-AKG/Anchor/Kinjal or equievalant reputed make A catagory ISI marked as approved with 6A modular type( falme retradant type)) switch ISI marked Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Equievalant model) or equievalant reputed make & model A catagory ISI marked as approved of modular type G.I box with metallic cover plate (both side)( falme retradant type) Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for STADIUM.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
2
-
568
Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( ( falme retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, complete suitable for for HOSTEL.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
8
-
192
Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( ( falme retradant type)) with suitable size modular box & cover( falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision) or equievalant make & model ISI marked as approved , complete suitable for OFFICE.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 10 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
28
-
501
Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)( falme retradant type)) with suitable size modular box & cover( falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make A catagory ISI marked as approved, (For equipement power)All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
5
-
638
Supplying,fixing of 1x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+1 no 6A switch & socket(modular type) ( ( falme retradant type) with suitable size modular box & metallic cover plate (both side)( falme retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved, (For equipement power)complete suitable for for OFFICE.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
2
-
1247
Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLSH/LSZH insulated, copper conductor, single core cable (Finolex/Anchor/Polycab/ HAVELLS/RR KEBLE) or equievalant reputed make A catagory ISI marked as approved, in recessed PVC conduit Heavy duty FRLS of mentioned size (AKG/Anchor/Kinjal or equievalant ISI marked as approved) as required as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty flexible conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)
66
-
127
2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR) (2X2.5+1X1.5)
55
-
141
4 nos single core 2.5 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor .in 25 mm dia non metallic heavy duty flexible conduit(LDB to LSB/5A SOCKET) (4X2.5+2X2.5)
21
-
258
2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit .(PDB to PSB/ GAYSER POINT/AC POINT/ROOM LIGHT CONTROL TO CORRIDOOR POINT/DG PANEL ESSENTIAL LOAD) (2X4+1X1.5)
33
-
158
4 nos single core 4 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty flexible conduit.(PDB to PSB/GAYSER. POINT/AC POINT/DG PANEL ACCL TO EACH QTR ESSENTIAL LOAD) (4X4+2X2.5)
11
-
241
2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty flexible conduit .(LFDB TO LBDB) (2X6+1X2.5)
22
-
189
4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty flexible conduit.(LFDB TO LBDB/power unit/point) (4X6+2X2.5)
8
-
287
4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuty conductorin 32 mm dia non metallic heavy duty flexible conduit .(LFDB TO FLOOR PANEL TO TPN BDB light ) (4X10+2X4)
22
-
414
4 nos single core 16 sq. mm copper wire for phase and neutral and 02 nos of single core 10 sq. mm copper wire for earth continuty conductor in 40 mm dia non metallic heavy duty flexible conduit.(FLOOR PANEL TO TPN BDB power) (4X16+2X10)
10
-
622
Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top along with 32 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge.. . Make-Legrand/Schneider/Siemens/panasonic or equievalant reputed make & model A catagory ISI marked as approved,All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
2
-
606
Supplying and fixing following size/ modules, GI box along with modular base & metallic cover plate (both side) plate for modular switches in recess etc as required as per direction of Engg.-in-Charge. MAKE-Legrand/Siemens/Anchor/Panasonic/ Schneider or equievalant reputed make & model A catagory ISI marked as approved .All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. 4 moudle(125mmx75mm)
2
-
262
1 moudle(75mmx75mm)
4
-
215
12 moudle(200mmx150mm)
2
-
477
Supplying and fixing of following sizes of medium class PVC FRLS conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .MAKE KINJAL/ AKG/Anchor or equievalant reputed make A catagory ISI marked as approved 20 MM
11
-
93
25 MM
12
-
95
Supply and fixing modular type indicator on the existing switch box/cover . Equievalant higher model of Schneider/Hager/Siemens/Anchor/Panasonic make or equievalant reputed make & model A catagory ISI marked as approved as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
8
-
105
Supplying and installation of AC starter Modular type, Equievalant higher model of Schneider/Hager/Siemens/Anchor/Panasonic make or equievalant reputed make & model A catagory ISI marked as approved coil voltage-415 Volt A.C. & O/L range of 9-14A range on mod Box of suitable size including modular coveras required as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
2
-
617
Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover. Equievalant higher model of Schneider/Hager/Siemens/Anchor/Panasonic make or equievalant reputed make & model A catagory ISI marked as approved .as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
1
-
203
S/F of Bakelite angle holder/batten holder (make-Anchor/Havells/Panasonic or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 5 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
6
-
58
Supplying,fixing of Blanking plate(modular type)( falme retradant type)) in existing switch box(anti bactorial & falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Arteor) /Panasonic (vision), complete suitable for IPH standard hospital.It should be warrantied for a period of 10 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. Sub-Head II (Light fitting Fixture & Fan)
10
-
42
Supplying, installation, of exhaust fan of heavy duty 300 mm sweep (Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Usha/Halonix or equievalant reputed make & model A catagory ISI marked as approved ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 5 years.
4
-
3056
Supplying, installation, of exhaust fan of heavy duty 380 mm sweep 1400 rpm with louvers Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Usha/Halonix or equievalant reputed make & model A catagory ISI marked as approved ) of exhaust fan in the existing wall, including fixing & conntection .as required as per direction of Engg.-in-Charge. Replacement Warranty will be 5 years.
1
-
3606
Supplying, installation, testing and commssioning of 1400 mm sweep white/milky colour ceiling fan Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Usha/Halonix or equievalant reputed make & model A catagory ISI marked as approved ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required.(With fan Regulator) as required as per direction of Engg.-in-Charge.Replacement Warranty will be 5 years.
4
-
2010
Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan Make-Equievalant higher model with 5 star rated of Havells/almonard/Anchor/Panasonic/Usha /Halonix or equievalant reputed make & model A catagory ISI marked as approved ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 5 years.. .(With fan Regulator)
16
-
1999
Supplying and fixing of Energy efficient surface mounted square shape 18 W LED luminaire of dimension of 225x 225 x 35 mm consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 20 watt and lumen output of 1500 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 2.5 KV , L70 B50: 30000 hrs (2 yrs warranty) and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. ( Make : (Make: wipro LD80-171-60-XX-SM or similar model of LT/Trilux /Philips/Panasonic/HALONIX or equievalant reputed make & model A catagory ISI marked as approved).The luminaire should be Replacement Warranty will be 5 years
20
-
1969
Supplying and fixing of Energy efficient recess mounted LED luminaire with white powder coated ,pressure die-cast Al housing ,with high transmititivity,non-yellowing PMMA diffuser, with wattage not more than 18 watt and lumen output not less than 2600 Lumen ( 120 lumens/watt ) of size 595 x595 x 70 mm , ,CRI not less than 80,CCT of 5700-6500 degree K,THD less than 10%, with Non integrated isolated driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation), all other accessories , life : 50,000 burning hours (5 years warranty) , Internal surge protection of 3 KV suitable for operation on 230 V, 50 Hz supply as required as per direction of Engg.-in-Charge. (Make: wipro LDB1-171-XXX-60-SM or similar model of LT/Trilux /Philips/Panasonic/HALONIX or equievalant reputed make & model A catagory ISI marked as approved.) The luminaire should be Replacement Warranty will be 5 years.
2
-
1815
SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 5 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. ( (Make: wipro LL20-221 --or similar model of LT/Trilux /Philips/Panasonic/HALONIX or equievalantreputed make & model A catagory ISI marked as approved.). The luminaire should be Replacement Warranty will be 5 years .
30
-
791
SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge.
( Make : WIPRO Model No:LL20-111-XXX-60-NE or similar model of PHILIPS/Panasonic/HALONIX or equievalant reputed make & model A catagory ISI marked as approved. )The luminaire should be Replacement Warranty will be 5 years
2
-
726
Supplying and fixing of small focus light for small monuments as 6W , 4000 K required as per direction of Engg.-in-Charge (Make: wiproLD98-900----or similar model of LT/Trilux /Philips/Panasonic/HALONIX or equievalant reputed make & model A catagory ISI marked as approved.)The luminaire should be Replacement Warranty will be 5 years
1
-
1366
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge .
(Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.
30
-
31
BDBS,DB,AC DB,FLOOR PANELS,MCBS Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant reputed make & model A catagory ISI marked as approved. as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 5 years 4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door(FOR LIGHT,POWER INDOOR,3-PH,POWER LOAD) Warranty on DB is 2 years.
2
-
2157
Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) (ALL LIGHT WITH CORRIDOOR/COMMON AREA,EM LIGHT,UPS LOAD, EM LOAD LIGHT LOAD,POWER LOAD )
2
-
1895
2+4 way MCB Enclosure DB (GLAZED door)(only each EM. CONNECTION UPS LOAD)
1
-
1623
Supplying and fixing 20 amps rating, 240 volts, C series, Double poles MCB of Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 5 years .MCB should have the fault indication system in different colour for ON, OFF & TRIP condition or Mid trip position for Trip conditions for easier identification of fault.Warranty on MCB is 5 years.
1
-
331
Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/L&T (Equievalant model)/Panasonic(Equivalant model) /ABB(Equivalant model) or equievalant reputed make & model A catagory ISI marked as approved. the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 5 years.MCB should have the fault indication system in different colour for ON, OFF & TRIP condition or Mid trip position for Trip conditions for easier identification of fault.Warranty on MCB is 5 years.
44
-
130
Supplying and fixing 25Amps DP 240 volts, RCCB,300mA Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABBor equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 5 years
1
-
1684
Supplying and fixing 40Amps DP 240 volts, RCCB,300mA Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 5 years
2
-
1921
Supplying and fixing 63Amps TPN 415 volts, RCCB,300mA Make-Equievalant higher model of Legrand/Snheider/Siemens / L&T/Panasonic /ABB or equievalant reputed make & model A catagory ISI marked as approved in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.(for power BDB & AC ODU, 8 way TPN BDB IC).The RCCB should be Replacement Warranty will be 5 years
2
-
2634
(Earthing) INSTALLATION S/IT/C of materials and installation of pipe earth electrode made out of 50mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ termination of G.I. flat / wire with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.The entire earthing system should be Replacement Warranty will be 5 years
2
-
2453
Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge.
25
-
93
Providing and fixing 25mm x 5 mm copper strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
8
-
515
CABLING AND END TERMINATION MAIN AREA Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade POLYCAB/HAVELLS/Finolex or equievalant reputed make ISI marked as approved of following size cables as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials 4core x 16 sq mm (MDB TO FDBL/FDBU SUB,BDB)
12
-
145.61
4 core x 4 sq mm (for small power/LIGHT TO POLE)
16
-
87.87
3.5core x 70 sq mm (To MDB)
133
-
381.59
LAYING OF CABLE Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
25
-
125
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 120 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
100
-
140
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
2
-
40
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
12
-
54
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in open duct etc as required as per direction of Engg.-in -charge.
5
-
32
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
12
-
77
Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 120 SQ. MM From 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.
5
-
123
Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge. 3.5 core x70 sq mm
2
-
383
4 core x16sq mm
2
-
190
Providing,fixing and laying of fallowing dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. 80 mm dia
15
-
472
Providing,fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. 100 mm dia
100
-
550
PANELS / MAIN PANEL S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 5 years & compelete test certificate must be submitted along with panel board including component list. (i)In commer- 01 number of 125(100-125) Amps 4P MCCB with Rom & sprader link,25kA. . (make-ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI marked)(Icu=100%Ics)with shunt trip.with axulary for BMS (ii) In commer DG- 01 no of 63A 4P on load changeover switch fallowed by 01 number of 63(40-63) Amps 4P MCCB with Rom & sprader link,25 kA. . (make-ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI marked)(Icu=100%Ics)with shunt trip.with axulary for BMS (iii) Busbar- 04 numbers of 200Amps Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator. (iv) Busbar DG - 04 numbers of 100Amps Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator. (v) Out going- (i) 63A 4P MCB 3 NOS FOR POWER BDB (Legrand/Schneider make) (vi) Out going- (ii) 04 nos 32A 3P MCB LIGHT BDB LIGHT BDB,WATER(Legrand/Schneider make) (vii) Out going- (iii) 04 nos 32A 2P MCB LIGHT BDB LIGHT BDB(Legrand/Schneider make) (viii) Instrument- (i) 06 numbers phase indicating lamp with toggle switch & HRC fuse. (ix)(ii) 01 set of digital type multifunction meter with CT for voltage,current,frequency,PF,THD indication
1
-
78802
CABLE TRAY / RACE WAY HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461 , CARBON STEEL WIRE MESH CABLE TRAYS with internal dimensions of size 54mm(H) x 200mm(W), of Legrand - Cablofil make or equievalant reputed make & model A catogory, ISI marked as approved .The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications.(With all accessories,bend,cover,supporter)WITH REQUIRED SIZED JUNCTION BOX ,COVER CONNECTOR as required as per direction of Engg.-in-Charge. Warrentee period oftray must be 5 years & compelete test certificate must be submitted .EPABX SYSTEM
5
-
595
Supply,installation, testing and commissioning of RJ11 Modular Complete in concealed manner including termination of cable
2
-
450
Supply & Laying of 2 Core 0.5mm telephone cable using Rigid PVC Pipe in concealed manner per running metre of cable laid.
25
-
65
Supply,installation, testing and commissioning of Electronic Push Button Telephone with Caller ID
2
-
700
Supply,installation, testing and commissioning of Lightening Protector for P&T Lines LAN SYSTEM
1
-
1150
Supply,installation, testing and commissioning of RJ45 Modular Complete in concealed manner including termination of cable
2
-
450
Supply & Laying of Cat 6 cable using Rigid PVC Pipe in concealed manner per running metre of cable laid.
25
-
70
Supply,installation, testing and commissionining of 1 Mtr Patch Cord
2
-
190
Supply,installation, testing and commissionining of 3 Mtr Patch Cord CCTV SYSTEM
2
-
240
Supply,installation, testing and commissioning of 6 Channel DVR with 2 Sata Ports
1
-
10000
Supply,installation, testing and commissioning of 4 MP Dome / Bullet Camera with 25 Mtrs IR Range
6
-
7500
Supply & Laying of RG59+ 3 Core cable using Rigid PVC Pipe in concealed manner per running metre of cable laid.
78
-
70
Supply,installation, testing and commissioning of BNC & DC Connectors
6
-
75
Supply,installation, testing and commissionining of 4 TB CCTV Surveillance Hard Disk
1
-
9500
Supply,installation, testing and commissionining of 10 Amps Power Supply
1
-
4500
Supply,installation, testing and commissioning of 24" LED Monitor
1
-
19000
Supply,installation, testing and commissioning of Bird Canopy
4
-
750
Supply,installation, testing and commissioning of Wireless Mouse SINE WAVE INVERTOR & SERVO
1
-
750
Supply,installation, testing and commissioning of 960 VA INVERTOR
1
-
6500
Supply,installation, testing and commissioning of Battery Rack
1
-
1500
Supply,installation, testing and commissioning of Tall Tubular 150Ah Battery
1
-
9500
EXTINGUISHER SYSTEM Portable Fire Extinguisher System Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made from ISI marked seamless cylinder confirming to IS: 7285, fitted with ISI marked controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket as per direction of Engineer-in-charge.
2
-
10426
FIRE SIGNAGES SYSTEM Providing and installing in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC non-reflective self adhesive vinyle painted foam board, complete with mirror fasteners.Providing and fixing the signages "Fire Exit, Fire Exit Arrow Down,Fire Exit Arrow Left,Fire Exit Arrow Right" of 1.5in height letters in white with green back ground.The size of the board shall be 25cm x 15 cm and shall be fixed at the height of 2 mts
2
-
916
Supply ,Installation testing commissioning of 45W, High efficient LED with aluminium housing in Pure Polyster UV resistant powder coated black finish and Top maintainable product with top opening die cast cover with acrylic clear glass reflector.CRI70, IP66, Ambient temp-0 to 45DegC, Driver efficiency85%, CCT-4000/5700K,THD10%,Powerfactor0.95, Surge protection-4 kV, Multistage Isolated Constant Current-Constant Voltage operated driver with range 150-300V AC and Safety Extra Low Voltage Safe level60V DC as per IEC standard. Luminaire lumen ≥ 4275 lumens (95 lm/W). Similar to Wipro Make LP07-501-XXX-57-CL or equivalent Philips/ LT/Trilux make. & model A catogory, ISI marked as approved, with proper model make having warrantied for a period of 5 years . The luminaire to be installed in GI hot dip galvanized smart braket with anti corroson,,uv rays stabilized, with proper model complete with SA bracket internal JB with 2 way connector and switch as per the pole drawing and direction of EIC against which inspection mat take place. The luminaire needs to be wired with 3 c 1 sq mm wire from JB as per the direction of Engg-in -charge.
1
-
10900
Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D- 1785/89 (Sch-80) and pipe fittings of the following nominal borewith clamps including making good the wall , ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. In ground floor 20 mm CPVC pipes
30
-
239.6
25 mm CPVC pipes
40
-
327.9
40mm dia P.V.C.ASTM(Sch.-80)Pipes
50
-
319.1
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings etc. all complete as per P.H. specification and direction of E.I.C. 250 mm thick wall in GF
6
-
46.1
Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C. In ground floor
50
-
167.5
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge. 15mm dia short body Bib Cock (Jaquar)-CON-CHR-035
2
-
984.3
15mm dia long body Bib Cock (Jaquar)-CON-CHR-107
4
-
984.3
15mm dia. C.P angle stop cock (Jaquar)-CON-CHR-051
10
-
935.1
15mm dia CP Health faucet.ALD-IVY-585(Jaquar)
2
-
910.5
15mm dia Two way Bib Cock (Jaquar)-CON-CHR-041KN
2
-
1255
25mm dia brass or gun metal full way valve(shakti make)
2
-
925.6
32mm dia brass or gun metal full way valve(shakti make)
2
-
1721.3
15mm dia CP Flange
20
-
40.3
15mm dia CP Extention Nipple
20
-
59.3
125mm CP grating
7
-
82.3
15mm dia Concealed Stop Cock (Jaquar)-CON-CHR-071
3
-
1181.2
Supplying all materials, labour, T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701--1996 including cutting holes through the tank and fixing mild steel ltubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting up to a height of 5 meters above ground level and placing the tank to the required position and providing 1st class Fly ash.Brick work in cement mortar (1:6) of 0.46mt. height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C.slab of size 1.60mt.x1.60mt. and 0.10mt. thick, R.C.C.beam of 0.25mt.x0.30mt. and 2.60mt. average length in cement concrete (1:2:4) using 12mm size h.g.chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge. 2000 litre capacity water storage tanks on roof of GF
1
-
34034.7
Supplying all materials, labour T&P and and fixing 10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main etc all complete as per the specification and direction of the Engineer in charge 10 Liters capacity PVC cistern with 32mm dia flush bend(Parryware/Hindware/Neycer/Rak)
4
-
1482.2
Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge. 580mm size Orissa pan(Parryware/Hindware/Neycer/Rak)
2
-
2216.6
Supplying all materials,labour,T&P and fixing the following vitreous china wash down water closet(European type W.C.pan) with integral 'P' or 'S' trap to the fllor with wooden plugs and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar(1:1)fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc.all complete as per specification and direction of the Engineer-in-charge. EWC with S trap(Parryware/Hindware/Somany/Cera)
2
-
2616.5
Supplying all materials,labour, T&P and fixing laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs,screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge. 600mmx450mmx250mm size Stainless steel Sink (Jayana)
1
-
4887.9
Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks (Plaza make)and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge Under Counter basin Hindware Make Cat No.10095
3
-
3868.4
550mmx400mm W.H.basin with porcelain pedestal
3
-
3897.2
Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer in charge. 600mmx450mm size B.E.mirror
6
-
654.8
Supplying all materials, labour, T&P and fixing standard size glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 600mmx125mm glass shelf with CP/NP guard rails
3
-
591.4
Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 25mmx600mm long CP towel rail
3
-
693.4
CP towel ring
3
-
460.6
Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge CP soap holder
10
-
174
Supplying fitting and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of MS tube of 19 gauge thickness and size of 19mmx19mm for stile & 15mmx15mm for top and bolt rails set with PVC door frame(Choukatha)of size 50mmx47mm is made out of 5cm thick sheet properly joined with solvent cement adhesive as per section view with MS square tube of 19mm of 19mm gauge to be inserted inside to give extra structural strength the price is inclusive of all cost of all materials labour,T&P etc.complete in all respect as per direction of the Engineer-in-charge. Shutter
11.03
-
3279.3
CIVIL WORK Supplying all materials, labour, T&P and filling in foundaton and plinth with sand well watered and rammed including conveyeance of all materials to worksite,payment of royalty, taxes etc all complete as per direction of the Engineer in charge.
2.15
-
543
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complete as aper specification and direction of the E.I.C.IN GF
1.61
-
5999.8
Supplying all materils, labour, T&P providing ceramic tile in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement 1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer-in-charge(size 30x30cm,Kajaria/Somany/Johnson/Orient Bell make to be pre-approved by the EIC).in GF
21.56
-
907.7
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork inclding watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIN GF
127.87
-
151.7
Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge(size 45x30cm,Kajaria/Somany/Johnson/Orient Bell make to be pre-approved by the EIC).IN GF
110.72
-
885
Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 80 PSS UV of size 750x570x1350mm height with water storage capacity 80 liters along with 2 nos of faucets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge.
1
-
78254
CONSTRUCTION OF 150MM DIA GRAVEL PACKED PRODUCTION WELL THROUGH HAND BORING (WATER JET) METHOD WITH SANITARY/SALINE SEALING- 1 No. Supplying all materials, labour, tools and plant and setting up boring equipments including erection of suitable staging for installation of the required size of tubewell, dismantling and removing the same after completion of the work, includifng transportation of the boring equipments, cleaning and levelling the site, excavation of mud pit, channels etc. levelling of site all complete as per direction of Engineer-in-charge.
1
-
12169
Supplying all labour, tools and plants and transporting boring pipes, top casing, grouting pipes, PVC pipes and fittings, PVC well screens, cement bentonite and gravels etc to work sites including loading and unloading etc. complete as per the direction of the Engineer-in-charge
1
-
1320.57
Supplying all labour, tools and plants and drilling pilot bore not less than 102 mm dia without casing pipes in all kinds of soils for the following depths excluding supply of necessary cutting equipments, extra sockets (whenever required) etc and withdrawing the boring pipes, washing and keeping the bore clear for logging if required all complete as per the direction of Engineer-in-charge Labour for drilling pilot bore from 0 to 360 mtr
74
-
978.3
Supplying all labour, tools land plant and reaming the pilot bore to the following sizes and depths without casing pipes including withdrawing the boring pipes, washing the bore by means of pipe cylinder etc all complete as per direction of Engineer-in-Charge. Reaming from 100 mm to 150 mm dia, 0 mtr to 360 mtr
74
-
168.9
Reaming from 100 mm to 150 mm dia, 0 mtr to 360 mtr
74
-
200.3
Reaming from 100 mm to 150 mm dia, 0 mtr to 360 mtr
74
-
221.9
Supplying all labour, tools and plant and jointing materials and lowering the 300mm dia top casing pipes into the positioin and removing the same after use all complete as per direction of Engineer-in-Charge.
1
-
1572.4
Supplying all labour, tools and plant and jointing materials and lowering the pvc casing pipes, fittings and well screens in position including fitting and fixing of centraliser, cutter plug and washing the bore etc complete as per the direction of the Engineer in charge
74
-
117.5
Cost of 150mm Dia casing Pipe
74.5
-
1251.4
Cutting slots in 150mm dia Pipe
15
-
350
Cost of 150mm dia end plug
1
-
350
Cost of 150mm dia Cap
1
-
435
Bentonite Powder
5
-
257.6
Supplying all labour, tools and plant and packing the bore with washed gravel (size P-6) around the pipes in good quality excluding cost of gravel etc all complete as per the direction of the Engineer-in-charge
1
-
1688.8
Cost of Gravel
1
-
184.7
Supplying all labour, tools and plant and grouting with cement slurry for sanitary sealing in the bore around the upper most 3 metres of 150 mm dia PVC casing pipe properly as per the direction of the Engineer-in-Charge. (Excluding the cost of cement)
1
-
1281.1
Supplying all labour, tools and plant and materials for cleaning and developing the tubewell with compressor continuously washed till clean and adequate discharge is obtained from the tube well including supply and use of necessary equipments and labour complete in all respect as per the direction of the Engineer-in-Charge.
1
-
2190.3
Supplying all materials, labour, T&P and constructing Bore well protection chamber of the inside size 650x650x1000hight with cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ash brickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:4) inside and outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Bore well protection chamber
1
-
10277.3
Installation of Submerssible pump set in the Bore-Well Supply all materials, labour, T&P and providing,fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 1 phase/1phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specifications with suitable control pannel, jointing with GI/PVC/HDPE pipes electrification, testing,commissioning,trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge. 1.5HP Three Phase 5 stage submersible pump set.
1
-
15200
DOL control panel
1
-
3805.5
50mm S. S. Nipple, S. S. bolt & clips
2
-
1000
50mm M. S. Clamp, Bend, Socket & 200mm M. S. well cap
1
-
1200
2.50mm Sqm Submersible flat cable
100
-
128.1
Steel rope with cover
80
-
26.7
20mm dia rigid U-PVC pipe
30
-
6.9
50mm dia HDPE pipe
80
-
181.8
Labour charges for lowering, testing, commissioning & transportation to site etc.
1
-
2000
Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, K.B brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge Gully trap chamber of size 250mmx250mm with R.C.C cover slab
3
-
1443
Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Inspection chamber Inside size 760mmx760mmx460mm
3
-
8505.8
Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Man hole chamber Inside size 910mmx910mmx910mm
1
-
16654.9
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. 110mm diameter U-PVC SWR pipes(Oriplast type-A/Supreme)
50
-
452.7
110mm U-PVC door Tee
6
-
386
110mm U-PVC offset
5
-
407.4
110mm U-PVC door bend
6
-
293.6
110mm U-PVC Plainbend
6
-
232
110mm U-PVC plain shoe bend
4
-
232
110mm U-PVC cowl
4
-
58.2
Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4984/2016 of the following outside dia for Pressure rating PN-6 including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. 110mm dia u-pvc pipe alround concrete
10
-
1096.3
Construction of 50 users RCC Septic Tank of inner size 5.00x1.6x1.40m with 2 year cleaning interval Septic tank no-1no Earth work in all kinds of soil within 50m initial lead & 1.5m initial lift including dressing, levelling & breaking clods to maximum 5cm to 7cm & laying in layers not exceeding 0.3m in depth & as per specification & direction of Department. Upto 1.50m initial lift
30
-
201.6
From 1.50m to 3.00m lift
46
-
216.4
Filling foundation trenches and Plinth with excavated & selected earth, laying in layers not exceeding 23cm thick well watered & rammed etc. complete including labour , T&P, lead & lift cost & conveyance, loading, unloading etc. complete as per specification & direction of EIC.
24.9
-
112
Filling the pipe line trenches with sand including watering & ramming etc. complete including all labour, T&P, cost of sand, conveyance, taxes, royality, loading & unloading as per specification & direction of EIC.
2
-
543
Providing and laying plain cement concrete (1:3:6) in foundation and bottom layers using 40mm size hard black crusher broken granite metal of approved quality and size from approved quarry including cost, conveyance, royality, all taxes complete and providing all labour T&P for machine mixing, lowering, laying and compacting to proper thickness, watering and curing for the required period and including dewatering (if required) as per the specification & direction of Engineer-in-charge.
3.4
-
4637.1
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
0.6
-
5999.8
Supplying all materials, labour, T&P and providing cement concrete (1:1½:3)with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
12.2
-
6692.8
Providing & making strong, rigid, levelled & plumbed centering & shuttering to required shape, allignment & size for all kinds of RCC works with wooden or steel centering materials with all bracing, ties, anchorage & supports including provision for necessary holes for P.H. works including cost of nails etc. complete & dismantling & removing the same after required interval from the date of casting including cost of all materials with transportation, hire charges, taxes, loading, unloading all labour, T&P, sundries etc. complete as per the specification & direction of the Engineer-in-charge.
101.2
-
431.9
Cutting, bending, binding, straightening HYSD bars of required diameter of approved quality as per approved design & drawing & tying the grill for RCC works & placing in position using binding wire (18 to 20 gauge, soft drawn & cold annealed) including cost of all labour, material, sundries, T&P, scaffolding etc. all complete as per the specification & the direction of Engineer-in-charge.
9.76
-
8231.4
Providing plaster with cement mortar including cement punning/ bitumen painting where required finished smooth over brick work with waterproofing cement based compound of approved quality including finishing smooth to proper slope and plane including cost of all materials with conveyance, royalty, taxes, watering, scaffolding and curing, all labour and T&P etc. complete as per specification & direction of EIC. 12mm thick C.P. 1:3 with punning
47.9
-
194.7
Providing, fitting & fixing of 110mm dia S.W.R Tee. The cost inclusive of all labour, T&P, taxes, transportation etc. all complete as per specification & direction of EIC.
2
-
232
Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge 1.40mm x 2.00m deep
1
-
19580.6
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements